Multicellular Aggregates Research Articles

Construction of multicellular aggregate by E-cadherin coated microparticles enhancing the hepatic specific differentiation of mesenchymal stem cells

The differentiation of human mesenchymal stem cells (hMSCs) into hepatocyte-like cells in vitroprovides a promising candidate for cell therapy of liver diseases, and cell aggregates have been proposed to improve the efficiency of expansion and differentiation. Previously, we engineered multicellular aggregates incorporating human E-cadherin fusion protein (hE-cad-Fc)-coated poly(lactic-co-glycolic acid) (PLGA) microparticles (hE-cad-PLGAs), and a significant improvement was obtained in both cellular proliferation of and cytokine secretion by hMSCs. In this study, hepatic differentiation of hMSCs was induced by a biomimetic microenvironment consisting of these engineered aggregates and a cocktail of specific cytokines. The ratio of hE-cad-PLGAs to hMSCs in engineered hMSCs aggregates was optimized to 1:3 for hepatic differentiation. The expressions of hepatic-specific markers were significantly promoted, and cell polarity and activated drug metabolism enzymes were established in MSC/hE-cad-PLGA aggregates compared with MSC and MSC/PLGA aggregates. Moreover, the expressions of stemness and definitive endoderm markers confirmed effectively induced endoderm differentiation in MSC/hE-cad-PLGA aggregates, which was consistent with the pattern of embryonic development. After pre-differentiation for 1 week, the MSC/hE-cad-PLGA aggregates continuously progressed the hepatic phenotype expression in healthy rat peritoneum. Therefore, the biomimetic microenvironment constructed by hE-cad-PLGAs in engineered multicellular aggregates was able to promote the process of endoderm differentiation and the subsequent hepatic differentiation of hMSCs. It would be appropriate for applied research in hepatotoxic drug screening and cell-based treatment of liver diseases. By optimizing with other cytokine cocktail, the engineered multicellular aggregates can be applied to the construction of other endoderm-derived organs. Statement of significanceThe differentiation of mesenchymal stem cells (MSCs) into hepatocyte-like cells in vitroprovides a promising for cell therapy for liver diseases, and cell aggregates have been proposed to improve the expansion and differentiation efficiency. Here, engineered multicellular aggregates were constructed by E-cadherin modified microparticles (hE-cad-PLGAs) construct a biomimetic microenvironment to promote the process of endoderm differentiation and the subsequent hepatic differentiation of hMSCs. Furthermore, after pre-differentiation for 1 week, the MSC/hE-cad-PLGA aggregates continuously progressed the hepatic phenotype expression in healthy rat peritoneum. Therefore, engineered multicellular aggregates with hE-cad-PLGAs would be appropriate for applied research in hepatotoxic drug screening and cell-based treatment of liver diseases, and provide a promising method in the construction of other endoderm-derived organs.

A three dimensional model of multicellular aggregate compression.

Multicellular aggregates are an excellent model system to explore the role of tissue biomechanics, which has been demonstrated to play a crucial role in many physiological and pathological processes. In this paper, we propose a three-dimensional mechanical model and apply it to the uniaxial compression of a multicellular aggregate in a realistic biological setting. In particular, we consider an aggregate of initially spherical shape and describe both its elastic deformations and the reorganisation of the cells forming the spheroid. The latter phenomenon, understood as remodelling, is accounted for by assuming that the aggregate undergoes plastic-like distortions. The study of the compression of the spheroid, achieved by means of two parallel, compressive plates, needs the formulation of a contact problem between the living spheroid itself and the plates, and is solved with the aid of the augmented Lagrangian method. The results of the performed numerical simulations are in qualitative agreement with the biological observations reported in the literature and can also be used to estimate quantitatively some fundamental aggregate mechanical parameters.

Individual and collective behaviour in cellular slime mould development: contributions of John Bonner (1920-2019).

John Bonner used the cellular slime moulds to address issues that lie at the heart of evolutionary and developmental biology. He did so mostly by combining acute observation and a knack for asking the right questions with the methods of classical embryology. The present paper focusses on his contributions to understanding two phenomena that are characteristic of development in general: chemotaxis of single cells to an external attractant, and spatial patterning and proportioning of cell types in the multicellular aggregate. Brief mention is also made of other areas of slime mould biology where he made significant inputs. He saw cellular slime moulds as exemplars of development and worthy of study in their own right. His ideas continue to inspire researchers.

High-throughput acoustofluidic fabrication of tumor spheroids.

Three-dimensional (3D) culture of multicellular spheroids, offering a desirable biomimetic microenvironment, is appropriate for recapitulating tissue cellular adhesive complexity and revealing a more realistic drug response. However, current 3D culture methods are suffering from low-throughput, poor controllability, intensive-labor, and variation in spheroid size, thus not ready for many high-throughput screening applications including drug discovery and toxicity testing. Herein, we developed a high-throughput multicellular spheroid fabrication method using acoustofluidics. By acoustically-assembling cancer cells with low-cost and disposable devices, our method can produce more than 12 000 multicellular aggregates within several minutes and allow us to transfer these aggregates into ultra-low attachment dishes for long-term culture. This method can generate more than 6000 tumor spheroids per operation, and reduce tumor spheroid formation time to one day. Our platform has advantages in forming spheroids with high throughput, short time, and long-term effectiveness, and is easy-to-operation. This acoustofluidic spheroid assembly method provides a simple and efficient way to produce large numbers of uniform-sized spheroids for biomedical applications in translational medicine, pharmaceutical industry and basic life science research.

Measurement of Contractility and Calcium Release in Cardiac Spheroids.

There is a need for organotypic in vitro models that resemble the native tissue in functionality and tissue architecture for disease models and drug development. To this end, many 3D culture formats have been developed over time. Among the most often used type is the scaffold-free multicellular aggregate, also called spheroid, that forms by self-assembly. However, working with 3D cultures can be challenging because single cells are not as accessible as in 2D cultures and standard lab procedures must be adapted or replaced altogether. This chapter describes methods to create cardiac spheroids consisting of human iPSC-derived cardiomyocytes and cardiac fibroblasts and how to measure contractility or calcium signals using quantitative video analysis and confocal microscopy. Emphasis is on the particular challenges that 3D cultures pose and on affordable methods that do not require specialized equipment.

Homophilic CD44 Interactions Mediate Tumor Cell Aggregation and Polyclonal Metastasis in Patient-Derived Breast Cancer Models.

Circulating tumor cells (CTC) seed cancer metastases; however, the underlying cellular and molecular mechanisms remain unclear. CTC clusters were less frequently detected but more metastatic than single CTCs of patients with triple-negative breast cancer and representative patient-derived xenograft models. Using intravital multiphoton microscopic imaging, we found that clustered tumor cells in migration and circulation resulted from aggregation of individual tumor cells rather than collective migration and cohesive shedding. Aggregated tumor cells exhibited enriched expression of the breast cancer stem cell marker CD44 and promoted tumorigenesis and polyclonal metastasis. Depletion of CD44 effectively prevented tumor cell aggregation and decreased PAK2 levels. The intercellular CD44-CD44 homophilic interactions directed multicellular aggregation, requiring its N-terminal domain, and initiated CD44-PAK2 interactions for further activation of FAK signaling. Our studies highlight that CD44+ CTC clusters, whose presence is correlated with a poor prognosis of patients with breast cancer, can serve as novel therapeutic targets of polyclonal metastasis. SIGNIFICANCE: CTCs not only serve as important biomarkers for liquid biopsies, but also mediate devastating metastases. CD44 homophilic interactions and subsequent CD44-PAK2 interactions mediate tumor cluster aggregation. This will lead to innovative biomarker applications to predict prognosis, facilitate development of new targeting strategies to block polyclonal metastasis, and improve clinical outcomes.See related commentary by Rodrigues and Vanharanta, p. 22.This article is highlighted in the In This Issue feature, p. 1.

Templated Macroporous Polyethylene Glycol Hydrogels for Spheroid and Aggregate Cell Culture.

Macroporous cell-laden hydrogels have recently gained recognition for a wide range of biomedical and bioengineering applications. There are various approaches to create porosity in hydrogels, including lyophilization or foam formation. However, many do not allow a precise control over pore size or are not compatible with in situ cell encapsulation. Here, we developed novel templated macroporous hydrogels by encapsulating uniform degradable hydrogel microspheres produced via microfluidics into a hydrogel slab. The microspheres degraded completely leaving macropores behind. Microsphere degradation was dependent on the incubation medium, microsphere size, microsphere confinement in the hydrogel as well as cell encapsulation. Uniquely, the degradable microspheres were biocompatible and when laden with cells, the cells were deposited in the macropores upon microsphere degradation and formed multicellular aggregates. The hydrogel-encapsulated cell aggregates were used in a small drug screen to demonstrate the relevance of cell-matrix interactions for multicellular spheroid drug responsiveness. Hydrogel-grown spheroid cultures are increasingly important in applications such as in vitro tumor, hepatocellular, and neurosphere cultures and drug screening; hence, the templated cell aggregate-laden hydrogels described here would find utility in various applications.

Thickness-Encoded Micropatterns in One-Component Thermoresponsive Polymer Brushes for Culture and Triggered Release of Pancreatic Tumor Cell Monolayers and Spheroids

Fabrication, characterization, and application of micropatterned one-component poly(di(ethylene glycol)methyl ether methacrylate) (PDEGMA) brushes for monolayer cell and spheroid culture and temperature-triggered release are reported. Micropatterns of various shapes and sizes were designed to possess a unique functionality imparted by thermoresponsive thin PDEGMA patches, which are cell adhesive at 37 °C, embedded in a much thicker cell-resistant PDEGMA matrix that does not exhibit measurable thermoresponsive properties. Depending on the cell seeding density, PaTu 8988t human pancreatic tumor cells or spheroids were cultured area-selectively, confined by the 40 ± 4 nm thick passivating PDEGMA matrix, and could be released on demand by a mild thermally triggered brush swelling in the 5 ± 1 nm thin regions. As shown by surface plasmon resonance (SPR) measurements, in contrast to the thinner brushes, the thicker brushes exhibited virtually no fibronectin adhesive properties at 37 °C, whereas at 25 °C, both areas showed similar protein resistant behavior. The quasi-2D thickness-encoded micropatterns were shown to be useful templates for the growth of 3D multicellular aggregates. Thermally induced release after 5 days of incubation afforded 3D cell spheroids comprising up to 99% viable cells demonstrating that the system can be used as a 3D spheroid in vitro model for basic tumor research and anticancer drug screenings.

Hyaluronic Acid-Based Multilayer Films Regulate Hypoxic Multicellular Aggregation of Pancreatic Cancer Cells with Distinct Cancer Stem-Cell-like Properties.

In vitro spherical cancer models have been widely used in cancer stem cell (CSC) research, and the ability of CSCs to form multicellular colonies is recognized as a morphological marker. However, although several spherical/colony models share a common three-dimensional (3D) conformation, each model displays its own intrinsic properties. Thus, the CSC phenotypes with distinct multicellular aggregate morphologies must be defined and clarified. Here, a novel 3D model was designed to regulate the type of pancreatic CSC colonies that form using niche mimetic hyaluronic acid (HA)-based multilayer nanofilms and hypoxia. The multicellular aggregate morphology, CSC phenotypes, CSC-related marker expression, cell cycle, invasion, and drug resistance were determined. On the basis of the results of a cell morphology analysis, colonies formed on multilayer nanofilms in response to both normoxia and hypoxia, but round and island-type colonies, were investigated. Immunostaining results revealed a significantly higher expression of stem cell markers, such as OCT4, CXCR4, and CD44v6, in colonies that formed on multilayer nanofilms. These colonies also expressed higher levels of E-cadherin, hypoxia-inducible factor-1α, and vimentin, particularly the round-type colonies that formed on HA-based multilayer nanofilms, [poly(allylamine) (PAH)/HA]3, indicating that these colonies exhibit hybrid and metastable epithelial/mesenchymal phenotypes. Moreover, the cell cycle and invasion tests revealed that most of the cells in colonies growing on multilayer nanofilms showed a quiescent, slow cycling phenotype but displayed higher invasion after induction. Furthermore, a hypoxic environment strongly influences the drug resistance. This study describes a useful tool to investigate the diverse phenotypes of pancreatic CSC colonies and to study their regulatory factors that may benefit CSC research.

Synthetic Chemotaxis and Collective Behavior in Active Matter.

The ability to navigate in chemical gradients, called chemotaxis, is crucial for the survival of microorganisms. It allows them to find food and to escape from toxins. Many microorganisms can produce the chemicals to which they respond themselves and use chemotaxis for signaling, which can be seen as a basic form of communication, allowing ensembles of microorganisms to coordinate their behavior, for example, during embryogenesis, biofilm formation, or cellular aggregation. For example, Dictyostelium cells use signaling as a survival strategy: when starving, they produce certain chemicals toward which other cells show taxis. This leads to aggregation of the cells resulting in a multicellular aggregate that can sustain long starvation periods. Remarkably, the past decade has led to the development of synthetic microswimmers, which can self-propel through a solvent, analogously to bacteria and other microorganisms. The mechanism underlying the self-propulsion of synthetic microswimmers like camphor boats, droplet swimmers, and in particular autophoretic Janus colloids involves the production of certain chemicals. As we will discuss in this Account, the same chemicals (phoretic fields) involved in the self-propulsion of a (Janus) microswimmer also act on other ones and bias their swimming direction toward (or away from) the producing microswimmer. Synthetic microswimmers therefore provide a synthetic analogue to motile microorganisms interacting by taxis toward (or away from) self-produced chemical fields. In this Account, we review recent progress in the theoretical description of synthetic chemotaxis mainly based on simulations and field theoretical descriptions. We will begin with single motile particles leaving chemical trails behind with which they interact themselves, leading to effects like self-trapping or self-avoidance. Besides these self-interactions, in ensembles of synthetic motile particles each particle also responds to the chemicals produced by other particles, inducing chemical (or phoretic) cross-interactions. When these interactions are attractive, they commonly lead to clusters, even at low particle density. These clusters may either proceed toward macrophase separation, resembling Dictyostelium aggregation, or, as shown very recently, lead to dynamic clusters of self-limited size (dynamic clustering) as seen in experiments in autophoretic Janus colloids. Besides the classical case where chemical interactions are attractive, this Account discusses, as its main focus, repulsive chemical interactions, which can create a new and less known avenue to pattern formation in active systems leading to a variety of pattern, including clusters which are surrounded by shells of chemicals, traveling waves and more complex continuously reshaping patterns. In all these cases "synthetic signalling" can crucially determine the collective behavior of synthetic microswimmer ensembles and can be used as a design principle to create patterns in motile active particles.

Non-sutural basicranium-derived cells undergo a unique mineralization pathway via a cartilage intermediate in vitro.

The basicranium serves as a key interface in the mammalian skull, interacting with the calvarium, facial skeleton and vertebral column. Despite its critical function, little is known about basicranial bone formation, particularly on a cellular level. The goal of this study was therefore to cultivate a better understanding of basicranial development by isolating and characterizing the osteogenic potential of cells from the neonatal murine cranial base. Osteoblast-like basicranial cells were isolated, seeded in multicellular aggregates (designated micromasses), and cultured in osteogenic medium in the presence or absence of bone morphogenetic protein-6 (BMP6). A minimal osteogenic response was observed in control osteogenic medium, while BMP6 treatment induced a chondrogenic response followed by up-regulation of osteogenic markers and extensive mineralization. This response appears to be distinct from prior analyses of the calvarium and long bones, as basicranial cells did not mineralize under standard osteogenic conditions, but rather required BMP6 to stimulate mineralization, which occurred via an endochondral-like process. These findings suggest that this site may be unique compared to other cranial elements as well as the limb skeleton, and we propose that the distinct characteristics of these cells may be a function of the distinct properties of the basicranium: endochondral ossification, dual embryology, and complex loading environment.

Mechanosensing at Cellular Interfaces.

At the plasma membrane interface, cells use various adhesions to sense their extracellular environment. These adhesions facilitate the transmission of mechanical signals that dictate cell behavior. This review discusses the mechanisms by which these mechanical signals are transduced through cell-matrix and cell-cell adhesions and how this mechanotransduction influences cell processes. Cell-matrix adhesions require the activation of and communication between various transmembrane protein complexes such as integrins. These links at the plasma membrane affect how a cell senses and responds to its matrix environment. Cells also communicate with each other through cell-cell adhesions, which further regulate cell behavior on a single- and multicellular scale. Coordination and competition between cell-cell and cell-matrix adhesions in multicellular aggregates can, to a significant extent, be modeled by differential adhesion analyses between the different interfaces even without knowing the details of cellular signaling. In addition, cell-matrix and cell-cell adhesions are connected by an intracellular cytoskeletal network that allows for direct communication between these distinct adhesions and activation of specific signaling pathways. Other membrane-embedded protein complexes, such as growth factor receptors and ion channels, play additional roles in mechanotransduction. Overall, these mechanoactive elements show the dynamic interplay between the cell, its matrix, and neighboring cells and how these relationships affect cellular function.

Brain Organoids: A New, Transformative Investigational Tool for Neuroscience Research.

Brain organoids are self-assembled, three-dimensionally structured tissues that are typically derived from pluripotent stem cells. They are multicellular aggregates that more accurately recapitulate the tissue microenvironment compared to the other cell culture systems and can also reproduce organ function. They are promising models for evaluating drug leads, particularly those that target neurodegeneration, since they are genetically and phenotypically stable over prolonged durations of culturing and they reasonably reproduce critical physiological phenomena such as biochemical gradients and responses by the native tissue to stimuli. Beyond drug discovery, the use of brain organoids could also be extended to investigating early brain development and identifying the mechanisms that elicit neurodegeneration. Herein, the current state of the fabrication and use of brain organoids in drug development and medical research is summarized. Although the use of brain organoids represents a quantum leap over existing investigational tools used by the pharmaceutical industry, they are nonetheless imperfect systems that could be greatly improved through bioengineering. To this end, some key scientific challenges that would need to be addressed in order to enhance the relevance of brain organoids as model tissue are listed. Potential solutions to these challenges, including the use of bioprinting, are highlighted thereafter.

Antibiotic resistance profiles of biofilm-forming bacteria associated with urine and urinary catheters in a tertiary hospital in Ile-Ife, Nigeria

Background: Microorganisms that infect humans differ in pathogenesis, virulence factors and antimicrobial resistance profiles. In natural settings, bacterial cells are most often found in close association with surfaces and interfaces, in the form of multicellular aggregates commonly called biofilms. Given their ubiquity and importance in the microbial world, it is hardly surprising that biofilms have attracted the attention of the scientific community. Biofilm formation on medical implant devices such as catheters is also a major problem that is closely tied to the adhesion and resistance-related abilities of the biofilm.Methodology: The ability of 216 bacterial isolates from mid-stream urine (100), catheter-stream urine (52) and catheter tips (64) to form biofilms was investigated using the tissue culture plate method, the tube and Congo red agar methods as well as their antibiotic resistance profiles using the agar disc diffusion method.Results: These revealed that Klebsiella spp. was the predominant bacterial genera accounting for 45.8% of the total isolates. A total of 50 isolates were biofilm-formers with 22% identified by the tissue culture plate method and 78% identified by the Congo red agar method. Klebsiella spp. had the highest ability to form biofilm while antibiotic resistance profiles showed all the biofilmformers to be multiply antibiotic resistant with least resistance to ofloxacin.Conclusion: It can therefore be concluded that some bacterial isolates associated with urinary tract infections have a propensity to form biofilm, thereby becoming multiply antibiotic resistant, and ofloxacin remains the antibiotic of choice in the treatment of such infections.

CdrA Interactions within the Pseudomonas aeruginosa Biofilm Matrix Safeguard It from Proteolysis and Promote Cellular Packing.

Biofilms are robust multicellular aggregates of bacteria that are encased in an extracellular matrix. Different bacterial species have been shown to use a range of biopolymers to build their matrices. Pseudomonas aeruginosa is a model organism for the laboratory study of biofilms, and past work has suggested that exopolysaccharides are a required matrix component. However, we found that expression of the matrix protein CdrA, in the absence of biofilm exopolysaccharides, allowed biofilm formation through the production of a CdrA-rich proteinaceous matrix. This represents a novel function for CdrA. Similar observations have been made for other species such as Escherichia coli and Staphylococcus aureus, which can utilize protein-dominant biofilm matrices. However, we found that these CdrA-containing matrices were susceptible to both exogenous and self-produced proteases. We previously reported that CdrA directly binds the biofilm matrix exopolysaccharide Psl. Now we have found that when CdrA bound to Psl, it was protected from proteolysis. Together, these results support the idea of the importance of multibiomolecular components in matrix stability and led us to propose a model in which CdrA-CdrA interactions can enhance cell-cell packing in an aggregate that is resistant to physical shear, while Psl-CdrA interactions enhance aggregate integrity in the presence of self-produced and exogenous proteases.IMPORTANCEPseudomonas aeruginosa forms multicellular aggregates or biofilms using both exopolysaccharides and the CdrA matrix adhesin. We showed for the first time that P. aeruginosa can use CdrA to build biofilms that do not require known matrix exopolysaccharides. It is appreciated that biofilm growth is protective against environmental assaults. However, little is known about how the interactions between individual matrix components aid in this protection. We found that interactions between CdrA and the exopolysaccharide Psl fortify the matrix by preventing CdrA proteolysis. When both components-CdrA and Psl-are part of the matrix, robust aggregates form that are tightly packed and protease resistant. These findings provide insight into how biofilms persist in protease-rich host environments.

Cellulose-based scaffolds for fluorescence lifetime imaging-assisted tissue engineering

Quantitative measurement of pH and metabolite gradients by microscopy is one of the challenges in the production of scaffold-grown organoids and multicellular aggregates. Herein, we used the cellulose-binding domain (CBD) of the Cellulomonas fimi CenA protein for designing biosensor scaffolds that allow measurement of pH and Ca2+ gradients by fluorescence intensity and lifetime imaging (FLIM) detection modes. By fusing CBD with pH-sensitive enhanced cyan fluorescent protein (CBD-ECFP), we achieved efficient labeling of cellulose-based scaffolds based on nanofibrillar, bacterial cellulose, and decellularized plant materials. CBD-ECFP bound to the cellulose matrices demonstrated pH sensitivity comparable to untagged ECFP (1.9–2.3 ns for pH 6–8), thus making it compatible with FLIM-based analysis of extracellular pH. By using 3D culture of human colon cancer cells (HCT116) and adult stem cell-derived mouse intestinal organoids, we evaluated the utility of the produced biosensor scaffold. CBD-ECFP was sensitive to increases in extracellular acidification: the results showed a decline in 0.2–0.4 pH units in response to membrane depolarization by the protonophore FCCP. With the intestinal organoid model, we demonstrated multiparametric imaging by combining extracellular acidification (FLIM) with phosphorescent probe-based monitoring of cell oxygenation. The described labeling strategy allows for the design of extracellular pH-sensitive scaffolds for multiparametric FLIM assays and their use in engineered live cancer and stem cell-derived tissues. Collectively, this research can help in achieving the controlled biofabrication of 3D tissue models with known metabolic characteristics. Statement of SignificanceWe designed biosensors consisting of a cellulose-binding domain (CBD) and pH- and Ca2+-sensitive fluorescent proteins. CBD-tagged biosensors efficiently label various types of cellulose matrices including nanofibrillar cellulose and decellularized plant materials. Hybrid biosensing cellulose scaffolds designed in this study were successfully tested by multiparameter FLIM microscopy in 3D cultures of cancer cells and mouse intestinal organoids.

Role of cell-secreted extracellular matrix formation in aggregate formation and stability of human induced pluripotent stem cells in suspension culture

Clinical and industrial applications require large quantities of human induced pluripotent stem cells (hiPSCs); however, little is known regarding the mechanisms governing aggregate formation and stability in suspension culture. To address this, we determined differences in growth processes among hiPSC lines in suspension culture. Using an hiPSC aggregate suspension culture system, hiPSCs from different lines formed multicellular aggregates classified as large compact or small loose based on their size and morphology. Time-lapse observation of the growth processes of two different hiPSC lines revealed that the balance between cell division and the extent of subsequent cell death determined the final size and morphology of aggregates. Comparison of the cell survival and death of two hiPSC lines showed that the formation of small, loose aggregates was due to continued cell death during the exponential phase of growth, with apoptotic cells extruded from growing hiPSC aggregates by the concerted contraction of their neighbors. Western blot and immunofluorescent staining revealed that aggregate morphology and proliferative ability relied to a considerable extent upon secretion of the extracellular matrix (ECM). hiPSCs forming large compact and stable aggregates showed enhanced production of collagen type I in suspension culture at 120h. Furthermore, these aggregates exhibited higher expression of E-cadherin and proliferation marker Ki-67 as compared with levels observed in small and loose aggregates at 120h. These findings indicated that differences in both aggregate formation and stability in suspension culture among hiPSC lines were caused by differences in ECM secretion capacity.

Isolation of cancer cells with augmented spheroid-forming capability using a novel tool equipped with removable filter.

Three-dimensional (3D) cell culture systems have been used to obtain multicellular spheroidal cell aggregates, or spheroids, from cancer cells. However, it is difficult to efficiently prepare large tumor-derived spheroids from cancer cells. To circumvent this problem, we here used a tool equipped with removal membrane, called Spheroid Catch, for the selection and enrichment of large-sized and/or size-matched spheroids from human squamous cell carcinoma (SAS cells) without loss of recovery. After a five-round process of selection and enrichment, we successfully isolated a subpopulation of SAS cells with augmented spheroid-forming capability, named eSAS: the efficiency of spheroid formation is 28.5% (eSAS) vs 16.8% (parental SAS). Notably, we found that some of eSAS cells survived after exposure of high doses of cisplatin in 3D culture. Moreover, orthotopic implantation by injecting eSAS cells into the tongues of nude mice showed reduced survival rate and increased tumor growth compared with those of nude mice injected with SAS cells. These results suggest that spheroids exhibiting properties of higher spheroid forming capacity can be efficiently collected by using Spheroid Catch. Indeed, genome-wide cDNA microarray and western blot analyses demonstrated higher mRNA and protein levels of hedgehog acyltransferase (HHAT), which is associated with stem maintenance in cell carcinoma by catalysing the N-palmitoylation of Hedgehog proteins, in eSAS cells than in SAS cells. We propose that Spheroid Catch could be useful for the study of spheroids, and potentially organoids, in the basic and clinical sciences, as an alternative method to other type of cell strainers.

Modeling the effect of ascites-induced compression on ovarian cancer multicellular aggregates.

ABSTRACTEpithelial ovarian cancer (EOC) is the most lethal gynecological malignancy. EOC dissemination is predominantly via direct extension of cells and multicellular aggregates (MCAs) into the peritoneal cavity, which adhere to and induce retraction of peritoneal mesothelium and proliferate in the submesothelial matrix to generate metastatic lesions. Metastasis is facilitated by the accumulation of malignant ascites (500 ml to >2 l), resulting in physical discomfort and abdominal distension, and leading to poor prognosis. Although intraperitoneal fluid pressure is normally subatmospheric, an average intraperitoneal pressure of 30 cmH2O (22.1 mmHg) has been reported in women with EOC. In this study, to enable experimental evaluation of the impact of high intraperitoneal pressure on EOC progression, two new in vitro model systems were developed. Initial experiments evaluated EOC MCAs in pressure vessels connected to an Instron to apply short-term compressive force. A Flexcell Compression Plus system was then used to enable longer-term compression of MCAs in custom-designed hydrogel carriers. Results show changes in the expression of genes related to epithelial-mesenchymal transition as well as altered dispersal of compressed MCAs on collagen gels. These new model systems have utility for future analyses of compression-induced mechanotransduction and the resulting impact on cellular responses related to intraperitoneal metastatic dissemination.This article has an associated First Person interview with the first authors of the paper.

Shear stress promotes anoikis resistance of cancer cells via caveolin-1-dependent extrinsic and intrinsic apoptotic pathways.

Circulating tumor cells (CTCs) need to acquire resistance to anoikis to survive after they experience fluid shear stress in the circulatory and lymphatic systems. However, the mechanism by which tumor cells resist anoikis under shear stress conditions remains unknown. Here, we found that the application of low shear stress (LSS; 2 dyn/cm2 ) to human breast carcinoma cells (MDA-MB-231) resulted in increased anoikis resistance when tumor cells were grown under anchorage-independent conditions. Caveolin-1 (Cav-1), the major component of plasma membrane caveolae, was overexpressed in LSS-treated cells and prevented tumor cells from anoikis, while depletion of Cav-1 restored sensitivity to anoikis. LSS-induced dissociation of Cav-1-Fas inhibited formation of the death-inducing signaling complex, caspase-8 activation, and rendered tumor cells resistant to anoikis. Likewise, LSS blocked the mitochondrial pathway through promotion of integrin β1-focal adhesion kinase-mediated multicellular aggregation and suppression of truncated BIDtranslocation mediated crosstalk between the extrinsic and intrinsic apoptotic pathways. Our findings provide insights into the mechanisms by which LSS induces anoikis resistance in breast carcinoma cells through inhibition of Cav-1-dependent extrinsic and intrinsic apoptotic pathways, and serves as a potential therapeutic target for CTCs and metastatic breast cancer.