Multicarbon Products Research Articles

Microenvironment Regulation, Promoting CO2 Conversion to Mono- and Multicarbon Products over Cu-Based Catalysts

Microenvironment Regulation, Promoting CO₂ Conversion to Mono- and Multicarbon Products over Cu-Based Catalysts

Establishing Non-Stoichiometric Ti4O7 Assisted Asymmetrical C-C Coupling for Highly Energy-Efficient Electroreduction of Carbon Monoxide.

Exploring an appropriate support material for Cu-based electrocatalyst is conducive for stably producing multi-carbon chemicals from electroreduction of carbon monoxide. However, the insufficient metal-support adaptability and low conductivity of the support would hinder the C-C coupling capacity and energy efficiency. Herein, non-stoichiometric Ti4O7 was incorporated into Cu electrocatalysts (Cu-Ti4O7), and served as a highly conductive and stable support for highly energy-efficient electrochemical conversion of CO. The abundant oxygen vacancies originated from ordered lattice defects in Ti4O7 facilitate the water dissociation and the CO adsorption to accelerate the hydrogenation to *COH. The highly adaptable metal-support interface of Cu-Ti4O7 enables a direct asymmetrical C-C coupling between *CO on Cu and *COH on Ti4O7, which significantly lowers the reaction energy barrier for C2+ products formation. Additionally, the excellent electroconductivity of Ti4O7 benefits the reaction charge transfer through robust Cu/Ti4O7 interface for minimizing the energy loss. Thus, the optimized 20Cu-Ti4O7 catalyst exhibits an impressive selectivity of 96.4 % and ultrahigh energy efficiency of 45.1 % for multi-carbon products, along with a remarkable partial current density of 432.6 mA cm-2. Our study underscores a novel C-C coupling strategy between Cu and the support material, advancing the development of Cu-supported catalysts for highly efficient electroreduction of carbon monoxide.

Advances in Tandem Strategies for CO2 Electroreduction: from Electrocatalysts to Reaction System Design

The electrochemical reduction of CO2 (CO2RR) offers the opportunity to store renewable energy in the form of chemicals and fuels while simultaneously reducing CO2 emissions. Compared to low‐carbon products such as carbon monoxide and formic acid, multicarbon products have demonstrated greater value in terms of economic feasibility. To date, various strategies have been developed to enhance electrocatalytic performance, with tandem strategies emerging as a promising approach, particularly for the formation of multicarbon products. In this review, current tandem strategies regarding CO2RR are thoroughly discussed, covering electrocatalyst designs from atomic‐scale tandem electrocatalysts to macroscale electrode configurations as well as reaction system designs. Additionally, the internal reaction processes involving reduction product upgrades, the application of multi‐physical tandem fields, and the tandem reaction systems are further summarized. This review aims to provide more fundamental insights into tandem strategies for CO2RR applications and inspire more creative ideas in the research community of CO2RR in light of this promising approach with its wide versatility, diversity and flexibility.

Research Progress of Dual‐Site Tandem Catalysts in the Preparation of Multi Carbon Products by Electro Reduction of CO2

AbstractThe era of an energy economy driven by “carbon neutrality” is putting forward stricter requirements for the use of carbon resources and the governance of CO2. Electrochemical reduction of carbon dioxide reaction (CO2RR), driven by renewable energy, is a practical energy storage technology with broad application prospects. It can reduce CO2 into carbon‐based fuels and chemical products. Among them, multi‐carbon (C2+) products have higher energy density and larger market size, and can significantly reduce the global demand for fossil fuels and close the artificial carbon cycle. Introducing additional active sites into Cu‐based catalysts to prepare dual‐site tandem catalysts can regulate the electronic and geometric structure of the catalysts, break linear scale relationships, reduce reaction potential barriers, and bring superb and stable catalytic performance. Various types of dual‐site tandem catalysts are developed, and the understanding of the tandem effect is pushed to a higher level. This paper reviews several typical dual‐site tandem catalysts: atom–atom dual‐site tandem catalysts, atom‐particle dual‐site tandem catalysts, particle–particle dual‐site tandem catalysts, and heterogeneous interface dual‐site tandem catalysts. It then deeply analyzes the reaction mechanism and research progress of these advanced catalysts in CO2RR. In addition, the challenges and opportunities faced by such catalysts are also discussed.

TM and P dual sites on polymeric carbon nitride enable highly selective CO reduction to C2 products with low potentials: A theoretical perspective.

The CO reduction reaction (CORR) for the production of high-value-added multi-carbon (C2+) products is currently being actively investigated, where searching for high-efficiency catalysts with moderate CO intermediate binding strength and low kinetic barrier for C-C coupling poses a significant challenge. In this study, we employed density functional theory computations to design four synergistic coupling dual sites catalysts for CORR to C2 products, namely, TM-P@melon, by co-doping transition metals (TM = Mn, Fe, Co, and Ni) and phosphorus (P) into the polymeric carbon nitride (i.e., melon-CN). Mn-P@melon and Ni-P@melon exhibit higher selectivity toward C2H5OH and C2H6, respectively, with limiting potentials (C-C coupling kinetic energy barriers) of -0.43V (0.52eV) and -0.17V (0.26eV), respectively. The introduction of TM and P atoms not only narrows the band gap of melon-CN but also favors the coupling of CO and *CHO, providing an active site for C-C coupling, thus facilitating the catalytic reaction. Our work provides rational insights for the design of stable, low-cost, and efficient CORR dual sites catalysts that facilitate the sustainable production of high-value C2 chemicals and fuels.

Concentrated C2+ Alcohol Production Enabled by Post-Intermediate Modulation and Augmented CO Adsorption in CO Electrolysis.

The electrocatalytic synthesis of multicarbon products from CO2/CO feedstock represents a sustainable method for chemical production with a reduced carbon footprint. Traditional copper catalysts predominantly produce alkenes, but generating valuable and versatile C2+ alcohols, especially high-energy-density C3 alcohols, has been challenging due to issues with selectivity, activity, and stability. Here, we present the construction of Ru-doped Cu nanowires that enhance the selectivity of n-PrOH and C2+ alcohols. In situ Raman spectroscopy shows that our approach promotes both *CO binding and availability, particularly facilitating the formation of high-frequency-bound *CO (*COHFB) and maintaining multiple *CO adsorption modes on Ru-modified and bare low-coordinated Cu nanowires. Density-functional theory (DFT) simulations illustrate that introducing Ru species onto a low-coordinated Cu step surface simultaneously stabilizes CO and alcohol-related intermediates, shifting the dominant reaction pathway toward alcohols and facilitating CO-C2 coupling at the expense of ethylene selectivity. In an alkaline gas-diffusion electrolyzer, we attained a maximum Faradaic efficiency (FE) of 35.9% for n-PrOH and 62.4% for the total C2+ alcohols. Optimizing parameters in the membrane electrode assembly (MEA) system enabled the one-pot generation and separation of C2+ alcohols, achieving a record concentration of 18.8 wt % (4.2 wt % n-PrOH and 14.6 wt % EtOH) with nearly 100% purity at 200 mA/cm2 over 100 h. This work not only provides new insights and guidance for the development of future catalysts from the perspectives of surface science and mechanisms but also highlights the importance of coupling material engineering with reactor engineering to optimize the production process of high-value alcohol products.

Regulated Cu Diatomic Distance Promoting Carbon-Carbon Coupling During CO2 Electroreduction.

To address the bottle-neck carbon-carbon coupling issue during electrochemical carbon dioxide reduction (eCO2RR) to multicarbon (C2+) products, this work develops an anion-directed strategy (Cl-, NO3 -, and SO4 2-) to regulate interatomic distance of Cu diatoms. In comparison to pristine Cu (with a typical Cu-Cu distance of 2.53 Å), Cu-boroimidazole frameworks (BIF)/SO4, NO3, and Cl material shows elongated diatomic distance of 3.90 Å, 4.21 Å, and 3.30 Å, respectively. Among them, the Cu-BIF/Cl exhibits an outstanding eCO2RR performance with a Faradaic efficiency of 72.12% for C2+ products and an industrial-level current density of 539.0 mA cm-2 at -1.75 V versus RHE. Significantly, according to theoretical and in situ experimental investigation, the highly electronegative Cl- ion lifts d-band center of Cu sites of Cu-BIF/Cl, facilitating *CO adsorption with a low Gibbs free energy and its later dimerization overcoming a small energy barrier. In addition, this strategy to manipulate interatomic distance for diatomic catalysts, can also be adaptable to other reactions involving intermediate coupling and following the Langmuir-Hinshelwood mechanism, such as carbon-nitrogen coupling, nitrogen-nitrogen coupling, etc.

Electrochemical carboxylation: Green synthesis of atrolactic acid using boron-doped diamond electrodes

Electrochemical CO2 fixation is vital for sustainability in the chemical industry, yet the selective synthesis of multi-carbon products remains challenging. Organic electrosynthesis offers promise by enabling precise control over reaction conditions and facilitating novel reactivity patterns. One such technique, electrochemical carboxylation, involves coupling CO2 with organic molecules to produce carboxylic acids. Specifically, electro-carboxylation of acetophenone yields atrolactic acid, a valuable precursor for nonsteroidal anti-inflammatory drugs, providing a greener alternative to traditional production methods. This study focuses on the synthesis and characterization of boron-doped diamond (BDD) films using the microwave plasma-assisted chemical vapor deposition (MP-CVD) method and synthesized BDD electrodes were then used for the electrolytic carboxylation of acetophenone. Various analytical techniques, including X-ray diffraction (XRD), Raman spectroscopy, and laser microscopy, etc. were employed to characterize the BDD films. Various BDD films synthesized for different durations were utilized in the electrolytic carboxylation of acetophenone, with the highest yield of atrolactic acid (25 %) achieved using a BDD film synthesized over 6 h. Also, the effect of BDD surface modification i.e. oxygen and hydrogen terminated BDD on the synthesis of atrolactic acid was studied. Additionally, different electrolytes were employed in the synthesis process of atrolactic acid. A comparative study between Pt and BDD electrodes for the electrolytic carboxylation of acetophenone was conducted, and a mechanism for the formation of atrolactic acid was proposed.

Boosting multi-carbon products selectivity of carbon dioxide reduction via bifunctional cyclodextrin-modification on copper/copper(I) oxide electrocatalysts

Electrochemical carbon dioxide reduction to multi-carbon (C2+) products presents a significant opportunity for converting greenhouse gases into valuable fuels and feedstocks. The development of highly active and stable catalysts remains a critical challenge. In this study, we report the design and synthesis of cyclodextrin-modified Cu/Cu2O electrocatalysts, which exhibit remarkable efficiency in driving the CO2 electroreduction process towards C2+ products. Our optimized catalyst achieves a C2+ Faradaic efficiency exceeding 50 % at a high current density of over 200 mA cm−2. Experimental findings, supported by density functional theory (DFT) calculations, reveal that cyclodextrin plays a dual role in stabilizing Cu+ and increasing the surface density of hydroxyl radicals. This dual function greatly benefits for enhancing *CO intermediate adsorption and promotes *CHO formation, thereby facilitating the crucial dimerization step for the formation of C2+ products. This work provides valuable insights into the development of highly active and selective electrocatalysts by carefully tuning the local catalytic environment, potentially opening new avenues for functionalizing electrocatalysts for future research in this area.

Selective Electrochemical CO2 Reduction to Ethylene and Multi-carbon Products on Oxide-derived Porous CuO Micro-cages

The electrochemical reduction of CO2 (CO2RR) presents a dual benefit: it helps mitigate environmental pollution while producing valuable multi-carbon (C2+) chemicals and storing renewable energy in chemical fuels. However, there is an urgent need for efficient electrocatalysts that can selectively increase the production of ethylene and C2+ products for the wide-scale implementation of CO2RR. Herein, we have facilely synthesized porous micro-caged oxide-derived copper oxide (OD-Cu MC) using a one-pot hydrothermal approach followed by air-annealing at 350 °C. The resulting electrocatalyst exhibited excellent performance for ethylene (C2H4) production, achieving a faradaic efficiency (FE) of 44.8 % for C2H4 and cumulative FE of 73.1 % for C2+ products at current density (ID) of 300 mA cm−2. At an ID of 400 mA cm−2, OD-Cu MC demonstrated a turnover frequency (TOF) of 0.012 s−1 for ethylene, which is 7.8 times higher than the TOF observed for commercially available copper oxide (CuO-CM). Moreover, at an ID of 300 mA cm−2, OD-Cu MC achieved a single-pass CO2 conversion (SPCC) of 35.2 % and a half-cell energy efficiency of 15.6 % for C2+ products. The catalyst also showed good stability, maintaining its performance for over 4 h at an ID of 200 mA cm−2. This straightforward synthesis approach opens new avenues for enhancing C2+ product selectivity in CO2RR.

Fluorine-regulated Cu catalyst boosts electrochemical reduction of CO2 towards ethylene production

Electrochemical reduction of carbon dioxide (CO2RR) into value-added multi-carbon (C2) products utilizing renewable energy is a promising way to reduce carbon emission and achieve carbon neutrality. However, rational design of catalysts towards high C2 products selectivity remains a formidable task. Herein, fluorine modified copper catalyst was synthesised by thermal anneal in the presence of ammonium fluoride and sequential annealing in argon atmosphere. The charge distribution and coordination environment on copper surface were adjusted by doped fluorine atoms, which enables the formation of key intermediates and their sequential evolution into ethylene. The catalyst achieves a remarkable Faradaic efficiency (FE) of 40.6 % for eCO2RR to ethylene and remains stable over 13 hours. Density functional theory calculations indicates that the excellent CO2RR performance can be attributed to the suppressed hydrogen evolution on fluorine-doped copper catalyst. Our work brings a potential modification strategy of Cu-based catalyst for electrolytic CO2-to-C2 pathway.

Highly Selective CO2 Electroreduction to Multi-Carbon Alcohols via Amine Modified Copper Nanoparticles at Acidic Conditions.

Electroreduction of CO2 into multi-carbon (C2+) products (e.g. C2+ alcohols) offers a promising way for CO2 utilization. Use of strong alkaline electrolytes is favorable to producing C2+ products. However, CO2 can react with hydroxide to form carbonate/bicarbonate, which results in low carbon utilization efficiency and poor stability. Using acidic electrolyte is an efficient way to solve the problems, but it is a challenge to achieve high selectivity of C2+ products. Here we report that the amine modified copper nanoparticles exhibit high selectivity of C2+ products and carbon utilization at acidic condition. The Faradaic efficiency (FE) of C2+ products reach up to 81.8 % at acidic media (pH=2) with a total current density of 410 mA cm-2 over n-butylamine modified Cu. Especially the FE of C2+ alcohols is 52.6 %, which is higher than those reported for CO2 electroreduction at acidic condition. In addition, the single-pass carbon efficiency towards C2+ production reach up to 60 %. Detailed studies demonstrate that the amine molecule on the surface of Cu cannot only enhance the formation, adsorption and coverage of *CO, but also provide a hydrophobic environment, which result in the high selectivity of C2+ alcohols at acidic condition.

Electrochemical Formation of C2+ Products Steered by Bridge-Bonded *CO Confined by *OH Domains.

During the electrochemical CO2 reduction reaction (eCO2RR) on copper catalysts, linear-bonded CO (*COL) is commonly regarded as the key intermediate for the CO-CO coupling step, which leads to the formation of multicarbon products. In this work, we unveil the significant role of bridge-bonded *CO (*COB) as an active species. By combining in situ Raman spectroscopy, gas and liquid chromatography, and density functional theory (DFT) simulations, we show that adsorbed *OH domains displace *COL to *COB. The electroreduction of a 12CO+13CO2 cofeed demonstrates that *COB distinctly favors the production of acetate and 1-propanol, while *COL favors ethylene and ethanol formation. This work enhances our understanding of the mechanistic intricacies of eCO(2)RR and suggests new directions for designing operational conditions by modifying the competitive adsorption of surface species, thereby steering the reaction toward specific multicarbon products.

Facts and Fictions About Photocatalytic CO2 Reduction to C2+ Products.

In response to carbon neutrality, photocatalytic reduction of CO2 has been the subject of growing interest for researchers over the past few years. Multi-carbon products (C2+) with higher energy density and larger market value produced from photocatalytic reduction of CO2 are still very limited owing to the low photocatalytic productivity and poor selectivity of products. This review focuses on the recent progress on photocatalytic reduction of CO2 towards C2+ products from the perspective of performance evaluation and mechanistic understanding. We first provide a systematic description of the entire fundamental procedures of photocatalytic reduction of CO2. An in-depth strategy analysis for improving the selectivity of photocatalytic reduction of CO2 to C2+ products is then addressed. Then the focus was on summarizing the ways to improve C2+ selectivity. The intrinsic mechanisms of photocatalytic reduction of CO2 to C2+ products are summarized in the final. Combining the foundation of photocatalysis with promising catalyst strategies, this review will offer valuable guidance for the development of efficient photocatalytic systems for the synthesis of C2+ products.

Preserving Molecular Tuning for Enhanced Electrocatalytic CO2-to-Ethanol Conversion.

Modifying catalyst surface with small molecular-additives presents a promising avenue for enhancing electrocatalytic performance. However, challenges arise in preserving the molecular-additives and maximizing their tuning effect, particularly at high current densities. Herein, we develop an effective strategy to preserve the molecular-additives on electrode surface by applying a thin protective layer. Taking 4-dimethylaminopyridine (DMAP) as an example of a molecular-additive, the hydrophobic protection layer on top of the DMAP-functionalized Cu-catalyst effectively prevents its leaching during CO2 electroreduction (CO2R). Consequently, the confined DMAP molecules substantially promote the CO2-to-multicarbon conversion at low overpotentials. For instance, at a potential as low as -0.47 V vs. reversible hydrogen electrode, the DMAP-functionalized Cu exhibits over 80 % selectivity towards multi-carbon products, while the pristine Cu shows only ~35 % selectivity for multi-carbon products. Notably, ethanol appears as the primary product on DMAP-functionalized Cu, with selectivity approaching 50 % at a high current density of 400 mA cm-2. Detailed kinetic analysis, in situ spectroscopies, and theoretical calculations indicate that DMAP-induced electron accumulations on surface Cu-sites decrease the reaction energy for C-C coupling. Additionally, the interactions between DMAP and oxygenated intermediates facilitate the ethanol formation pathway in CO2R. Overall, this study showcases an effective strategy to guide future endeavors involving molecular tuning effects.

Exploring Electrocatalytic CO2 Reduction Over Materials Derived from Cu‐Based Metal‐Organic Frameworks

AbstractThe direct valorization of carbon dioxide (CO2) into value‐added chemicals offers an efficient and attractive approach to promoting carbon neutrality. Among the available methods, the electrocatalytic CO2 reduction reaction (eCO2RR) for producing multicarbon products (C2+) is gaining attention owing to its simplicity. However, achieving selective control over product formation remains a challenge. One key issue is the lack of a reliable correlation between the physicochemical properties of electrocatalytic materials and their activity and selectivity. To address this gap, we conducted a model study in which carbonized CuxZny@C materials, derived from metal‐organic frameworks (MOFs), were synthesized with varying Cu/Zn ratios. The pyrolyzed bimetallic MOFs retained key properties of the original MOFs while also developing new characteristics. These subtle changes in physicochemical properties influenced product selectivity. The findings of our study revealed that higher Zn doping favors the formation of single‐carbon (C1) products, whereas it is less favorable for multicarbon (C2+) products. Optimizing the Cu/Zn ratio was emphasized through characterization techniques, which will help guide the design of improved electrocatalytic systems for the eCO2RR process.

Boosting selectivity for multi-carbon products in electrochemical CO2 reduction via enhanced hydroxide adsorption in ultrafine CuOx/CeOx nanoparticles

The electricity-driven reduction of CO2 presents a unique prospect of mitigating atmospheric CO2 levels and converting renewable energy into chemical fuels. However, the lack of an efficient catalyst that can transform CO2 into desired products with appreciable selectivity at commercially relevant current densities (ID) impedes the practical implications of this technology. This work describes a scalable approach for producing ultrafine nanoparticles of CuOx-CeOx (CuCe) composites via rapid coprecipitation under oxygen-deprived conditions. In this process, Ce(OH)3 acts as a reducing agent converting Cu(OH)2 into ultrafine Cu2O nanoparticles. Thus, the Ce: Cu ratio in composite effectively controls the particle size and bulk structural fixture of the CuCe composites. Despite having lower ECSA, The CuCe composites exhibit superior catalytic performance compared to CuO, with significantly higher selectivity for ethanol production and lower selectivity for CO and H2. The Cu1.5Ce prepared using a Cu: Ce ratio of 1.5:1, demonstrated remarkable catalytic activity with Faradaic efficiencies (F. E.) of 34.2 % for ethanol, 44.1 % for ethylene, and 81.08 % for multi-carbon (C2+) products. Moreover, while operating at the ID of 500 mA cm−2, Cu1.5Ce achieves a single pass CO2 conversion (SPCC) of 19.9 %, and a half-cell energy efficiency (E. E. half-cell) of 31.5 % for the C2+ products. It produces the C2+ products at the partial current density (pID) of 405.4 mA cm−2. The superior performance of Cu1.5Ce can be attributed to the improved hydroxide adsorption and partial retention of oxidized copper species under cathodic bias.

Dual‐Metal Sites Drive Tandem Electrocatalytic CO2 to C2+ Products

AbstractThe electrochemical conversion of CO2 into valuable chemicals is a promising route for renowable energy storage and the mitigation of greenhouse gas emission, and production of multicarbon (C2+) products is highly desired. Here, we report a 1.4 %Pd−Cu@CuPz2 comprising of dispersive CuOx and PdO dual nanoclusters embedded in the MOF CuPz2 (Pz=Pyrazole), which achieves a high C2+ Faradaic efficiency (FEC2+) of 81.9 % and C2+ alcohol FE of 47.5 % with remarkable stability when using 0.1 M KCl aqueous solution as electrolyte in a typical H‐cell. Particularly, the FE of alcohol is obviously improved on 1.4 %Pd−Cu@CuPz2 compared to Cu@CuPz2. Theoretical calculations have revealed that the enhanced interfacial electron transfer facilitates the adsorption of *CO intermediate and *CO−*CO dimerization on the Cu−Pd dual sites bridged by Cu nodes of CuPz2. Additionally, the oxophilicity of Pd can stabilize the key intermediate *CH2CHO and promote subsequent proton‐coupled electron transfer more efficiently, confirming that the formation pathway is skew towards *C2H5OH. Consequently, the Cu−Pd dual sites play a synergistic tandem role in cooperatively improving the selectivity of alcohol and accelerating reductive conversion of CO2 to C2+.

Highly Tensile Strained Cu(100) Surfaces by Epitaxial Grown Hexagonal Boron Nitride for CO2 Electroreduction to C2+ Products.

Copper (Cu) has been considered as the most promising catalyst for the electrochemical conversion of CO2 to multicarbon (C2+) products. However, insufficient coverage of the *CO intermediate on the C2+ formation Cu(100) facet largely hinders the C-C coupling process and thus the C2+ conversion efficiency. Herein, we developed an epitaxial growth strategy to generate highly tensile-strained Cu(100) facets via the epitaxial growth of hexagonal boron nitride (hBN) on Cu(100) facets to promote *CO coverage for efficient CO2 to C2+ conversion. The highest ∼6% tensile strain on the Cu(100) facets was obtained by lattice mismatch between the Cu(100) and hBN(002) facets. Theory calculations indicated that tensile-strained Cu(100) facets deliver a notable d-band center upshift to enhance *CO adsorption. As a result, the obtained highly tensile-strained Cu(100) facets enabled an 8-fold improvement of *CO coverage and thus a 83.4% C2+ Faradaic efficiency at 1.2 A cm-2 in strongly acidic electrolyte (pH = 1).

Dual-Metal Sites Drive Tandem Electrocatalytic CO2 to C2+ Products.

The electrochemical conversion of CO2 into valuable chemicals is a promising route for renowable energy storage and the mitigation of greenhouse gas emission, and production of multicarbon (C2+) products is highly desired. Here, we report a 1.4 %Pd-Cu@CuPz2 comprising of dispersive CuOx and PdO dual nanoclusters embedded in the MOF CuPz2 (Pz=Pyrazole), which achieves a high C2+ Faradaic efficiency (FEC2+) of 81.9 % and C2+ alcohol FE of 47.5 % with remarkable stability when using 0.1 M KCl aqueous solution as electrolyte in a typical H-cell. Particularly, the FE of alcohol is obviously improved on 1.4 %Pd-Cu@CuPz2 compared to Cu@CuPz2. Theoretical calculations have revealed that the enhanced interfacial electron transfer facilitates the adsorption of *CO intermediate and *CO-*CO dimerization on the Cu-Pd dual sites bridged by Cu nodes of CuPz2. Additionally, the oxophilicity of Pd can stabilize the key intermediate *CH2CHO and promote subsequent proton-coupled electron transfer more efficiently, confirming that the formation pathway is skew towards *C2H5OH. Consequently, the Cu-Pd dual sites play a synergistic tandem role in cooperatively improving the selectivity of alcohol and accelerating reductive conversion of CO2 to C2+.