Multiacquisition Variable-resonance Image Combination Research Articles

Advanced Imaging of Total Knee Arthroplasty.

The prevalence of total knee arthroplasty (TKA) is increasing with the aging population. Although long-term results are satisfactory, suspected postoperative complications often require imaging with the implant in place. Advancements in computed tomography (CT), such as tin prefiltration, metal artifact reduction algorithms, dual-energy CT with virtual monoenergetic imaging postprocessing, and the application of cone-beam CT and photon-counting detector CT, allow a better depiction of the tissues adjacent to the metal. For magnetic resonance imaging (MRI), high bandwidth (BW) optimization, the combination of view angle tilting and high BW, as well as multispectral imaging techniques with multiacquisition variable-resonance image combination or slice encoding metal artifact correction, have significantly improved imaging around metal implants, turning MRI into a useful clinical tool for patients with suspected TKA complications.

Evaluating Hip Periprosthetic Joint Infection with Metal-artifact-reduction MR Imaging.

To evaluate the significant findings of hip periprosthetic joint infection (PJI) using metal-artifact-reduction (MAR) MRI and to compare the MRI results to other clinical markers. The results of MRI, including two-dimensional fast-spin echo sequences with increased bandwidth and multi-acquisition variable-resonance image combination selective for hips with orthopedic implants at 1.5T (from April 2014 to November 2021), were retrospectively assessed for imaging findings and diagnostic impressions by two radiologists. Clinical data and courses were also investigated. Univariate and multivariate analyses were performed to identify the significant MRI findings in patients with hip PJI and those who underwent surgical intervention. The MRI impressions were compared with other clinical markers in diagnosing hip PJI. Thirty-seven hip joints in 24 Asian patients (age = 73.9 ± 10.8 years; 18 females) were included. Twelve hip joints (32%) had PJI; seven underwent a surgical intervention. The significant findings for hip PJI included periosteal edema of the acetabulum, intermuscular edema, intramuscular fluid collection, and lymphadenopathy (P < 0.05). In the cases with surgical intervention, the significant findings included capsular distension, capsular thickening, an osteolysis-like pattern of the femur, subcutaneous fluid collection, and lymphadenopathy (P < 0.05). The MRI impressions had high diagnostic significance for both hip PJI cases and those with surgical intervention (P < 0.001). The MRI impression was more significant for hip PJI than the other clinical markers (P < 0.05), while the other clinical markers were more significant in the cases with surgical intervention (P < 0.05). The significant findings in the hip PJI cases included acetabular periosteal edema, intermuscular edema, intramuscular fluid collection, and lymphadenopathy. The significant findings in the cases with surgical intervention included capsular distention, capsular thickening, a femoral osteolysis-like pattern, subcutaneous fluid collection, and lymphadenopathy. The utilization of MAR MRI demonstrated great diagnostic significance for hip PJI.

Metallic artifact suppression with MAVRIC-SL in magnetic resonance imaging for assessing chronic pain after hip or knee arthroplasty.

To analyze the association between osteolysis at the prosthesis interfaces, as determined by magnetic resonance imaging (MRI) with multiacquisition variable-resonance image combination selective (MAVRIC-SL) sequences, and clinical severity after knee or hip arthroplasty, as well as to assess interobserver and intraobserver agreement on periprosthetic bone resorption. This was a cross-sectional study of 47 patients (49 joints) under postoperative follow-up after knee or hip arthroplasty, with chronic pain, between March 2019 and August 2020. All of the patients completed the Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) questionnaire. The component interfaces were evaluated and ordered into two groups: osseointegrated and osteolytic. Nonparametric tests were used. There were significant differences between the two groups in terms of the mean WOMAC scores: total (p = 0.010); stiffness domain (p = 0.047); and function (p = 0.011) domains. There was substantial interobserver and intraobserver agreement for most analyses of the components. Periprosthetic osteolysis appears to be associated with clinical complaints of pain in the post-arthroplasty scenario, and MAVRIC-SL provides reproducible assessments. It could prove to be an important tool for orthopedists to use in the evaluation of challenging cases of chronic pain after arthroplasty.

Significantly Worse Fixation of Cemented Patellar Components on Multiacquisition Variable-Resonance Image Combination Magnetic Resonance Imaging Compared to Femoral and Tibial Components: A Cause for Concern?

BackgroundThe etiology of anterior knee pain after total knee arthroplasty (TKA) remains unclear. Few studies have examined patellar fixation quality. The purpose of the present study was to evaluate the patellar cement-bone interface after TKA on magnetic resonance imaging (MRI) and to correlate the patella fixation grade with the incidence of anterior knee pain. MethodsWe retrospectively reviewed 279 knees undergoing metal artifact reduction MRI for either anterior or generalized knee pain at least 6 months after cemented, posterior-stabilized TKA with patellar resurfacing with one implant manufacturer. MRI cement-bone interfaces and percent-integration of the patella, femur, and tibia were assessed by a fellowship-trained senior musculoskeletal radiologist. The grade and character of the patella interface were compared to the femur and tibia. Regression analyses were used to determine the association between patella integration with anterior knee pain. ResultsThere were more patellar components with ≥75% zones of fibrous tissue (50%) compared to the femur (18%) or tibia (5%) (P < .001). There were a greater number of patellar implants with poor cement integration (18%) compared to the femur (1%) or tibia (1%) (P < .001). MRI findings showed more evidence of patellar component loosening (8%) compared to the femur (1%) or tibia (1%) (P < .001). Anterior knee pain was correlated with worse patella cement integration (P = .01), with women predicted to have better integration (P < .001). ConclusionThe quality of the patellar cement-bone interface after TKA is worse compared to the femoral or tibial component interface. Poor patellar cement-bone interface may be a source of anterior knee pain after TKA, but further investigation is required.

Quantitative evaluation of the reduction of distortion and metallic artifacts in magnetic resonance images using the multiacquisition variable‑resonance image combination selective sequence.

Magnetic resonance imaging (MRI) is superior to computed tomography (CT) in determining changes in tissue structure, such as those observed following inflammation and infection. However, when metal implants or other metal objects are present, MRI exhibits more distortion and artifacts compared with CT, which hinders the accurate measurement of the implants. A limited number of reports have examined whether the novel MRI sequence, multiacquisition variable-resonance image combination selective (MAVRIC SL), can accurately measure metal implants without distortion. Therefore, the present study aimed to demonstrate whether MAVRIC SL could accurately measure metal implants without distortion and whether the area around the metal implants could be well delineated without artifacts. An agar phantom containing a titanium alloy lumbar implant was used for the present study and was imaged using a 3.0 T MRI machine. A total of three imaging sequences, namely MAVRIC SL, CUBE and magnetic image compilation (MAGiC), were applied and the results were compared. Distortion was evaluated by measuring the screw diameter and distance between the screws multiple times in the phase and frequency directions by two different investigators. The artifact region around the implant was examined using a quantitative method following standardization of the phantom signal values. It was revealed that MAVRIC SL was a superior sequence compared with CUBE and MAGiC, as there was significantly less distortion, a lack of bias between the two different investigators and significantly reduced artifact regions. These results suggested the possibility of utilizing MAVRIC SL for follow-up to observe metal implant insertions.

MAVRIC based T2 mapping assessment of infrapatellar fat pad scarring in patients with total knee arthroplasty.

The infrapatellar fat pad (IPFP) has been implicated as a source of postoperative knee pain. Imaging the IPFP is challenging in patients with total knee arthroplasty (TKA) due to metallic susceptibility artifact. Multi-Acquisition Variable-Resonance Image Combination (MAVRIC)-based T2 Mapping has been developed to mitigate this artifact and can generate quantitative T2 data. Objectives of this study were to (1) measure T2 values of the IPFP in patients with TKAs using a MAVRIC based T2 mapping technique and (2) determine if IPFP T2 values are related to the degree of fat pad scarring or clinical magnetic resonance imaging (MRI) findings. Twenty-eight subjects (10 males, 18 females, Age: 66 + 7.2 years [Mean ± standard deviations]) undergoing clinical MRIs were sequentially recruited. Morphological imaging and quantitative T2 mapping sequences were performed on a clinical 1.5 Tscanner. The morphologic images were graded for the presence and severity of fat pad scarring and clinical outcomes. T2 values were calculated in the total fat pad volume, a normal regions of interest (ROI), and an abnormal ROI. T2 values were shortened in the total IPFP volume (p = 0.001) and within abnormal regions (p = 0.003) in subjects with more severe IPFP scarring. The difference between T2 values in normal-abnormal regions was greater in subjects with severe versus no scarring (+1426.1%, p = 0.008). T2 values were elevated in patients with MRI findings of osteolysis (+32.3%, p = 0.02). These findings indicate that MAVRIC-based T2 Mapping may be used as a quantitative biomarker of postoperative IPFP scarring in individuals following TKA.

Multiacquisition Variable-Resonance Image Combination Magnetic Resonance Imaging to Study Detailed Bone Apposition and Fixation of Cementless Knee System Compared to Cemented Total Knee Replacements

BackgroundThe ability to utilize magnetic resonance imaging (MRI) to assess bony fixation may allow a better understanding of implant design and longevity. A new cementless total knee arthroplasty (TKA) was introduced, and we hypothesized that this cementless system would show similar fixation compared to a cemented system as assessed by multispectral MRI. MethodsMultiacquisition variable-resonance image combination selective MRI was performed in 20 patients implanted with a cementless TKA. A matched control group of 20 patients who had a cemented TKA was also evaluated. Each patellar, femoral, and tibial component was graded globally as well as by specific zones. The patella zones were medial, lateral, superior, and inferior. The femoral and tibial components were divided into 4 zones: anteromedial, anterolateral, posteromedial, and posterolateral. Integration grades were performed for each zone as follows: (1) normal, (2) fibrous tissue, (3) fluid interface, (4) osteolysis. A Chi-square test was performed to detect differences in level of integration grades between patients with cemented and those with cementless TKA. ResultsAt average 16-month follow-up, the cementless group grading noted 0/80 (0%) vs 2/76 (2.63%) patellar zones with fluid interface, 0/80 (0%) vs 26/80 (32.5%) femoral zones with fibrous tissue, and 10/80 (12.5%) vs 17/80 (21.25%) tibial zones with fibrous tissue. The analysis showed patellar (P < .001), femoral (P < .001), and tibial (P < .001) components had improved fixation and less percentage of fibrous tissue and fluid present in the cementless TKA. ConclusionsUtilizing metal suppression MRI, a newer cementless knee implant demonstrated excellent biologic fixation and improved fixation compared to the cemented group.

Diagnostic Value of Advanced Metal Artifact Reduction Magnetic Resonance Imaging for Periprosthetic Joint Infection

Magnetic resonance imaging around metal joint prostheses including multiacquisition variable-resonance image combination selective at 1.5 T (from April 2014 to August 2020) was retrospectively evaluated by 2 radiologists for detection of abnormal findings (joint effusion, capsular thickening, pericapsular edema, soft-tissue fluid collection, soft-tissue edema, bone marrow edema pattern around the implant [BME pattern], lymphadenopathy, and others) and overall image impression for PJI. Regarding the soft-tissue fluid collection, presence of communication to the joint or capsular-like structure was evaluated. Clinical assessments were recorded. Positive predictive values (PPVs), negative predictive values (NPVs), and odds ratios (ORs) for PJI were calculated for the abnormal findings. Overall image impression for PJI was evaluated. χ2, Fisher exact, t, and Mann-Whitney U tests and receiver operating characteristic analysis were used. Interobserver agreement was assessed with κ statistics. Forty-three joints in 36 patients (mean ± SD age, 75.4 ± 8.8 years; 30 women; hip [n = 29], knee [n = 12], and elbow [n = 2]) were evaluated. Eighteen joints (42%) were clinically diagnosed as PJI. The findings suggesting PJI were capsular thickening (PPV, 70%; NPV, 90%; OR, 20.6), soft-tissue fluid collection (PPV, 81%; NPV, 81%; OR, 19.1), soft-tissue edema (PPV, 67%; NPV, 89%; OR, 17), pericapsular edema (PPV, 76%; NPV, 81%; OR, 13.7), and joint effusion (PPV, 55%; NPV, 100%; OR, 12). Soft-tissue fluid collection without capsular-like structure (PPV, 83%; NPV, 74%; OR, 14.4) or with communication to the joint (PPV, 75%; NPV, 71%; OR, 7.3) suggested PJI. The combinations of joint effusion, capsular thickening, pericapsular edema, soft-tissue fluid collection, and soft-tissue edema highly suggested PJI. Regarding the BME pattern, the combination with soft-tissue edema raised the possibility of PJI (PPV, 73%; NPV, 69%; OR, 5.9). Regarding the interobserver agreements for each abnormal finding, κ values were 0.60 to 0.77. Regarding the overall image impression, weighted κ value was 0.97 and areas under the receiver operating characteristic curve were 0.949 (95% confidence interval, 0.893-1.005) and 0.926 (95% confidence interval, 0.860-0.991) with no significant difference (P = 0.534). The findings suggesting PJI were capsular thickening, soft-tissue fluid collection, soft-tissue edema, pericapsular edema, and joint effusion. The combinations of them highly suggested PJI. Regarding the BME pattern, the combination with soft-tissue edema raised the possibility of PJI.

Clinical utility of accelerated MAVRIC-SL with robust-PCA compared to conventional MAVRIC-SL in evaluation of total hip arthroplasties.

To compare the diagnostic performance of a conventional metal artifact suppression sequence MAVRIC-SL (multi-acquisition variable-resonance image combination selective) and a novel 2.6-fold faster sequence employing robust principal component analysis (RPCA), in the MR evaluation of hip implants at 3T. Thirty-six total hip implants in 25 patients were scanned at 3T using a conventional MAVRIC-SL proton density-weighted sequence and an RPCA MAVRIC-SL proton density-weighted sequence. Comparison was made of image quality, geometric distortion, visualization around acetabular and femoral components, and conspicuity of abnormal imaging findings using the Wilcoxon signed-rank test and a non-inferiority test. Abnormal findings were correlated with subsequent clinical management and intraoperative findings if the patient underwent subsequent surgery. Mean scores for conventional MAVRIC-SL were better than RPCA MAVRIC-SL for all qualitative parameters (p < 0.05), although the probability of RPCA MAVRIC-SL being clinically useful was non-inferior to conventional MAVRIC-SL (within our accepted 10% difference, p < 0.05), except for visualization around the acetabular component. Abnormal imaging findings were seen in 25 hips, and either equally visible or visible but less conspicuous on RPCA MAVRIC-SL in 21 out of 25 cases. In 4 cases, a small joint effusion was queried on MAVRIC-SL but not RPCA MAVRIC-SL, but the presence or absence of a small effusion did not affect subsequent clinical management and patient outcome. While the overall image quality is reduced, RPCA MAVRIC-SL allows for significantly reduced scan time and maintains almost equal diagnostic performance.

Magnetic Resonance Imaging Around Metal at 1.5 Tesla: Techniques From Basic to Advanced and Clinical Impact.

During the last decade, metal artifact reduction in magnetic resonance imaging (MRI) has been an area of intensive research and substantial improvement. The demand for an excellent diagnostic MRI scan quality of tissues around metal implants is closely linked to the steadily increasing number of joint arthroplasty (especially knee and hip arthroplasties) and spinal stabilization procedures. Its unmatched soft tissue contrast and cross-sectional nature make MRI a valuable tool in early detection of frequently encountered postoperative complications, such as periprosthetic infection, material wear-induced synovitis, osteolysis, or damage of the soft tissues. However, metal-induced artifacts remain a constant challenge. Successful artifact reduction plays an important role in the diagnostic workup of patients with painful/dysfunctional arthroplasties and helps to improve patient outcome. The artifact severity depends both on the implant and the acquisition technique. The implant's material, in particular its magnetic susceptibility and electrical conductivity, its size, geometry, and orientation in the MRI magnet are critical. On the acquisition side, the magnetic field strength, the employed imaging pulse sequence, and several acquisition parameters can be optimized. As a rule of thumb, the choice of a 1.5-T over a 3.0-T magnet, a fast spin-echo sequence over a spin-echo or gradient-echo sequence, a high receive bandwidth, a small voxel size, and short tau inversion recovery-based fat suppression can mitigate the impact of metal artifacts on diagnostic image quality. However, successful imaging of large orthopedic implants (eg, arthroplasties) often requires further optimized artifact reduction methods, such as slice encoding for metal artifact correction or multiacquisition variable-resonance image combination. With these tools, MRI at 1.5 T is now widely considered the modality of choice for the clinical evaluation of patients with metal implants.

The Utility of MRI With Multiacquisition Variable-Resonance Image Combination (MAVRIC) in Diagnosing Deep Total Hip Arthroplasty Infection.

Background: The 2010 American Academy of Orthopaedic Surgeons Clinical Practice Guidelines report insufficient evidence to address the diagnostic efficacy of magnetic resonance imaging (MRI) for periprosthetic joint infection (PJI). Questions/Purposes: The purpose of this study was to determine the utility of MRI with multiacquisition variable-resonance image combination (MAVRIC) metal artifact suppression techniques in diagnosing PJI in the setting of total hip arthroplasty (THA). Methods: Multiacquisition variable-resonance image combination MRIs obtained of THAs between November 2012 and November 2016 were queried. Radiology reports were classified as positive (suspicious for infection), negative (no features of infection), or inconclusive (infection cannot be excluded or correlation with aspiration suggested if clinically concerned). Chart review identified cases of deep PJI according to the modified Musculoskeletal Infection Society criteria. Results: Of 2156 MRIs of THAs included, MRI was concerning for infection in 1.8% (n = 39), inconclusive in 1.2% (n = 26), and negative in 97.0% (n = 2091). Deep PJI was identified in 53 (2.5%) patients, 30 of whom (56.6%) had conclusively positive finding on MRI (false-negative rate: 43.4%, sensitivity: 56.6%). Of 2103 aseptic THAs, only 9 (0.4%) MRIs were read as suspicious for infection (false-positive rate: 0.4%; specificity: 99.6%). Conclusion: Magnetic resonance imaging with MAVRIC is a highly specific test for PJI with a low false-positive rate. This indicates that when clinicians are provided with an MRI that unexpectedly suggests infection, a formal evaluation for infection is indicated. In patients with otherwise equivocal diagnostic findings, MRI may help confirm, but not refute, a diagnosis of PJI. Prospective study with more experienced image reviewers may further support the use of MRI in PJI.

Multiacquisition Variable-Resonance Image Combination Selective Can Improve Image Quality and Reproducibility for Metallic Implants in the Lumbar Spine.

The aim of this study is to evaluate how metallic artifacts in the lumbar spine can affect images obtained from magnetic resonance (MR) sequences. We performed a phantom experiment by scanning an agar containing an orthopedic metallic implant using 64-channel multidetector row computed tomography (CT) and a 3-tesla MR unit. We compared the reproducibility in each measurement, enlargement or reduction ratio of the CT and MR measurements, and signal deviation in each voxel from the control. The reproducibility on CT and multiacquisition variable-resonance image combination selective (MAVRIC SL) was good, but that on the other MR sequences showed either fixed bias or proportional bias. The reduction ratios of the distance between the nails were significantly smaller in MAVRIC SL than in the other MR sequences after CT measurements (p<0.001, respectively). MAVRIC SL was able to reduce the metallic artifact, permitting observation of the tissue surrounding the metal with good reproducibility.

Clinical Feasibility of Multi-Acquisition Variable-Resonance Image Combination-Based T2 Mapping near Hip Arthroplasty.

Background: Hip arthroplasty is increasingly prevalent, and early detection of complications can improve outcomes. Quantitative magnetic resonance imaging (qMRI) methods using multi-acquisition variable-resonance image combination (MAVRIC) may allow for the assessment of soft tissues in close proximity to hip arthroplasty devices. Question/Purposes: We sought to determine the clinical feasibility of MAVRIC-based T2 mapping as a qMRI approach for assessing synovial reactions in patients with a hip arthroplasty device. We hypothesized that there would be differences in T2 metrics by synovial type, clinical impression, and clinical findings related to synovitis. Methods: We conducted a cross-sectional study of 141 subjects with 171 hip arthroplasties with greater than 1 year post-implantation. We enrolled subjects who had had a primary total hip arthroplasty or hip resurfacing arthroplasty between May 2019 and March 2020, excluding those with a revision hip arthroplasty and those with standard safety contraindications for receiving an MRI. Institutional standard 2D fast spin echo (FSE), short-tau inversion recovery (STIR), and susceptibility-reduced MAVRIC morphological MR images were acquired for each hip and followed by a dual-echo acquisition MAVRIC T2 mapping sequence. Results: While 131 subjects (81%) were classified as having a "normal" synovial reaction, significantly longer T2 values were found for fluid synovial reactions compared with mixed reactions. In addition, subjects with synovial dehiscence and decompression present had T2 prolongation. Larger synovial volumes were found in subjects with low-signal intensity deposits. Conclusions: MAVRIC-based T2 mapping is clinically feasible and there are significant quantitative differences based on type of synovial reaction. Patients undergoing hip arthroscopy revision surgery will warrant comparison of T2 values with direct histologic assessment of a tissue sample obtained intraoperatively. The approach used in this study may be used for a quantitative evaluation and monitoring of soft tissues around metal implants.

MRI after Bonebridge implantation: a comparison of two implant generations.

Analysis of head magnetic resonance images (MRI) of patients with active bone conduction implants (BCIs) is challenging. Currently, there are two generations of the transcutaneous Bonebridge system (BCI601 and BCI602), the main difference between them being the transducer design and thickness. The aim was to compare the effect of transducer placement and artifact reduction sequences on legibility of MRI scans. Four Thiel-fixed human head specimens were used: BCI601 was implanted in sinodural and middle fossa placement, and BCI602 in middle fossa and retrosigmoid approach. Images were obtained with a Signa® 1.5T MR. A metal artifact reduction sequence known as MAVRIC (multiacquisition variable-resonance image combination) was used. Each specimen was scanned using standard axial T2 SE and compared with axial MAVRIC artifact reduction sequences. Qualitatively, limits of the artifact produced by the implant were better defined with MAVRIC than with standard T2 sequences. Assessment of contralateral internal auditory canal (IAC) was possible in all cases. Placement of the BCI602 in the middle fossa allowed the view of the ipsilateral IAC using MAVRIC sequence. Quantitatively, the artifact was reduced with MAVRIC sequence from 6.3 to 59.7%, depending on the position of implant and model; the middle fossa placement and the BCI602 being those generating shorter artifact radio. Artifact optimized sequences as MAVRIC reduce the artifact caused by the Bonebridge system. The middle fossa approach allows a better visualization of IAC canal in the ipsilateral ear with both implant versions, but the effect is more prominent with the BCI602.

Multiacquisition Variable-Resonance Image Combination Magnetic Resonance Imaging Used to Study Detailed Bone Apposition and Fixation of an Additively Manufactured Cementless Acetabular Shell

BackgroundThe ability to utilize magnetic resonance imaging (MRI) to assess bony fixation in 3 dimensions may allow a better understanding of the implant design and bony integration. We hypothesized that a new 3-dimensionally printed cementless highly porous acetabular component (Stryker Trident II TritaniumTM) would show better fixation than an earlier cup from the same manufacturer as assessed by the noninvasive technique of multispectral MRI. MethodsMultiacquisition variable-resonance image combination selective metal suppression MRI was performed in 19 patients implanted with a new 3-dimensionally printed cup and 20 patients who had received a previous-generation cup from the same manufacturer at 1-year follow-up. Each cup was graded globally as well as by 9 specific zones. Integration grades were performed for each zone: 0, full bone integration; 1, fibrous membrane present; 2, osteolysis; and 3, fluid present. A mixed-effects logistic regression model was used to compare fixation between the 2 groups. ResultsAll cups in both cohorts showed greater than 90% radiographically estimated global bony integration (3-dimensionally printed cups, 99.4%; regular cups 91.6%) with no osteolysis or fluid observed in any cup. The 3-dimensionally printed cup had 1 of 171 zones (0.6%) graded as fibrous membrane present, while the 2-dimensional group had 15 of 180 zones (8.3%) graded as fibrous. Of note, screw hole regions were omitted but may be read as fibrous membrane areas. ConclusionUsing multiacquisition variable-resonance image combination selective MRI, our analysis showed greater biologic fixation and less fibrous membrane formation in the 3-dimensionally printed cups than the control group at 1-year follow-up.

Accelerated metallic artifact reduction imaging using spectral bin modulation of multiacquisition variable-resonance image combination selective imaging

ObjectivesTo assess the clinical utility of a prototype sequence for metal artifact reduction, the multiacquisition variable–resonance image combination selective (MAVRIC-SL) at 3 T. This sequence allows a surgical prosthesis-dependent reduction in the number of spectral bins. We compared the prototype MAVRIC SL to the conventional two-dimensional fast spin-echo (FSE) sequences and MAVRIC SL images acquired with all spectral bins to those acquired with the optimized number of spectral bins. MethodsMAVRIC SL images were acquired in 25 image sets from August 2017 to April 2018. For each subject, the optimized number of spectral bins was determined using a short spectral calibration scan. The image sets obtained with magnetic resonance imaging that were used for the analysis consisted of MAVRIC-SL proton density (PD)-weighted or short inversion time inversion recovery (STIR) images acquired with all 24 spectral bins, the corresponding images with the optimized number of spectral bins, and the conventional two-dimensional FSE or STIR PD-weighted images. A musculoskeletal radiologist reviewed and scored the images using a five-point scale for artifact reduction around the prosthesis and visualization of the prosthesis and peri-prosthetic tissues. Quantitative evaluation of the peri-prosthetic tissues was also performed. The Wilcoxon rank-sum test was used to test for significance. ResultsThe MAVRIC SL images enabled a significantly improved reduction in metallic artifacts compared to the conventional two-dimensional FSE sequences. The optimized number of spectral bins ranged from 6 to 20, depending on the prosthesis susceptibility difference, size, and orientation to the B0 field. The scan times significantly decreased with a reduced number of spectral bins (354.0 ± 139.1 versus 283.0 ± 89.6 s; 20% reduced scan time; p < .05). Compared to the MAVRIC SL images acquired with all 24 bins, the artifact reduction and visualization of the prosthesis and peri-prosthetic tissues on the MAVRIC SL images acquired with calibrated bins were not significantly different. ConclusionsCompared to the MAVRIC SL images acquired with all 24 spectral bins, those acquired with an optimized number of spectral bins can reduce metallic artifacts with no significant image quality degradation while providing reduced scan time.

Metal artifact reduction in 68Ga-PSMA-11 PET/MRI for prostate cancer patients with hip joint replacement using multiacquisition variable-resonance image combination

BackgroundPET/MRI has a high potential in oncology imaging, especially for tumor indications where high soft tissue contrast is crucial such as genitourinary tumors. One of the challenges for PET/MRI acquisition is handling of metal implants. In addition to conventional methods, more innovative techniques have been developed to reduce artifacts caused by those implants such as the selective multiacquisition variable-image combination (MAVRIC-SL). The aim of this study is to perform a quantitative and qualitative assessment of metal artifact reduction in 68Ga-PSMA-11 PET/MRI for prostate cancer patients with hip joint replacement using a selective MAVRIC-SL sequence for the whole pelvis.MethodsWe retrospectively analyzed data of 20 men with 37 metal hip implants diagnosed with PCA, staged or restaged by 68Ga-PSMA-11 PET/MRI from June 2016 to December 2017. Each signal cancellation per side or metal implant was analyzed on the reference sequence LAVA-FLEX, as well as T1-weighted fast spin echo (T1w-FSE) sequence and MAVRIC-SL. Two independent reviewers reported on a four-point scale whether abnormal pelvic 68Ga-PSMA-11 uptake could be assigned to an anatomical structure in the tested sequences.ResultsThe smallest averaged signal void was observed on MAVRIC-SL sequences with a mean artifact size of 26.17 cm2 (range 12.63 to 42.93 cm2, p < 0.001). The best image quality regarding anatomical assignment of pathological PSMA uptakes in the pelvis by two independent readers was noted for MAVRIC-SL sequences, followed by T1w-FSE with excellent interreader agreement.ConclusionsMAVRIC-SL sequence allows better image quality in the surrounding of hip implants by reducing MR signal voids and increasing so the accuracy of anatomical assignment of pathological 68Ga-PSMA-11 uptake in the pelvis over LAVA-FLEX and T1w-FSE sequences.

Metallic Artifacts on MR Imaging and Methods for Their Reduction

MR 영상에서 금속 인공물은 금속 삽입물과 주변 조직의 magnetic susceptibility의 차이에 의해 나타난다. 금속 인공물을 줄이는 일반적인 방법은 낮은 자장의 MR 장비를 사용하고, 금속물의 방향에 따라 주파수부호화 방향과 위상부호화 방향을 바꾸고, receiver bandwidth와 matrix를 높이며, 절편 두께를 작게 하고 short tau inversion recovery나 Dixon 기법을 사용하여 fat-suppression을 하는 것이다. Slice-encoding for metal artifact correction이나 multi-acquisition variable-resonance image combination을 통해 보다 강력하게 금속 인공물을 줄일 수 있다. 그러나 이 방법의 최대 단점은 촬영 시간이 길다는 것이나 최근 개발된 compressed sensing과 같은 고속화 기법을 통해 이를 해결할 수 있게 되었다.

Does load-bearing materials influence hip capsule thickness in total hip replacement? An MRI case-matched study

BackgroundCeramic-on-ceramic (COC) total hip replacements (THR) have exhibited less instability and late dislocation. Hip capsule plays an important role in hip stability. Different surrounding soft tissue reactions have been observed according to the bearing material used but no study compared these data using MRI investigation. Therefore, we performed a retrospective case control study to compare hip capsule thicknesses according to the bearing materials in THR and in native hips. HypothesisHip capsule is thicker after COC THR compared to ceramic- or metal-on-polyethylene (PE) bearings, or native hips. Materials and methodMagnetic resonance imaging (MRI) images, combined with a multi acquisition variable resonance image combination (MAVRIC) sequence, was used to measure the hip capsule thickness in 16 patients (29 hips) who had either COC (13 hips, median age at surgery: 64.8 years old, median follow-up at imaging: 2482 days), PE bearings (11 hips, median age at surgery: 48.4 years old (significantly different from COC THR), median follow-up at imaging: 1860 days (NS)), or a native hip with no implant (5 hips). Two independent radiologists measured capsular thicknesses in 4 different zones and were blinded regarding the bearing components. The imaged hips were classified into three groups: native, COC and PE. ResultsThe COC THR group had the thickest capsules (median 7.0mm, range 2.9–15.5mm). This result was statistically significant (p<0.0001) when compared to PE THR (median 4.9mm, range 2.2–10.5mm), and to native hips (median 4.1mm, range 2.7–6.9mm) measurements, respectively. Furthermore, painful hips had thinner capsules (4.6mm, range 2–10.5) compared to not painful hips (6.8mm, range 2.3–15.5) (p=0.0006). DiscussionThis is the first in-vivo study measuring capsular thickness in THR with the objective of measuring variations according to the hip implant materials used. The results revealed a significantly thicker capsule for the COC bearing compared to either PE or native hips, and a thinner capsule in painful hips. Level of evidenceIII, retrospective non-consecutive cohort study.

Metal About the Hip and Artifact Reduction Techniques: From Basic Concepts to Advanced Imaging.

Promising outcomes of hip replacement interventions in this era of aging populations have led to higher demands for hip arthroplasty procedures. These require effective methods and techniques for the detection of postoperative outcomes and complications. Based on the presence or absence of radiographic findings, magnetic resonance imaging (MRI) and computed tomography (CT) may be required to detect and further characterize different causes of failing implants. Yet metal-related artifacts degrade image quality and pose significant challenges for adequate image quality. To mitigate such artifacts in MRI, a set of techniques, collectively known as metal artifact reduction sequence (MARS) MRI, were developed that optimize the framework of the conventional pulse sequences and exploit novel multispectral and multispatial imaging methods such as Slice Encoding for Metal Artifact Correction (SEMAC) and Multi-Acquisition Variable-Resonance Image Combination (MAVRIC). Metal-induced artifacts on CT can be effectively reduced with virtual monochromatic reconstruction of dual-energy CT data sets, metal artifact reduction reconstruction algorithms, and postprocessing image visualization techniques.