Mucoadhesive Carriers Research Articles

Development of Mucoadhesive Chitosan-Iodoacetamide Buccal Tablets for Local Delivery of Dextromethorphan

Abstract This study aimed to synthesize a chitosan (CHI) derivative, chitosan-iodoacetamide (CHI-IA), with enhanced mucoadhesive properties and develop buccal mucoadhesive tablets of CHI-IA for local delivery of dextromethorphan (DXT). Mucoadhesive CHI-IA was synthesized by a chemical reaction between CHI and iodoacetic acid (IA) in different weight ratios. The synthesized CHI-IA was characterized by Fourier-transformed infrared spectroscopy (FT-IR) and nuclear magnetic resonance spectroscopy (NMR) to confirm the chemical structure and assure successful synthesis. DXT was selected as the model drug to be incorporated into the matrix tablet to develop mucoadhesive buccal cough relief tablets. The mucoadhesive strength of the CHI-IA tablets was determined by a texture analyzer. Moreover, the drug content and the release characteristics of DXT from the mucoadhesive tablets were evaluated. The FT-IR and NMR spectra of CHI-IA indicated the conjugation of IA on the structure of CHI. The CHI-IA tablets exhibited a 4-time increase in mucoadhesion force compared with that of unmodified CHI. Moreover, a gradual release of DXT from the tablets was observed, and the release kinetics best fit with the Higuchi model (R2 = 0.9912). Therefore, the CHI-IA could be applied as the mucoadhesive carrier system for drug delivery. Keywords: Chitosan, Iodoacetic acid, Mucoadhesive, Buccal tablets, Dextromethorphan

Construction of gastroretentive aminated chitosan coated (sunflower oil /alginate / i-carrageenan) floatable polymeric beads for prolonged release of Amoxicillin trihydrate

New gastroretentive floatable polymeric beads were developed for efficient encapsulation and prolonged release of amoxicillin trihydrate (AMT). Herein, sunflower oil (SFO) was entrapped into alginate (Alg)/iota carrageenan (i-CG) doubly networked polymeric beads, and followed by surface-coating with aminated chitosan (AmCs) layer. Diverse analysis tools were employed to investigate the chemical structure, thermal and morphological properties of the formulated [email protected] (SFO/Alg/i-CG) polymeric beads. The formulated polymeric beads exhibited exceptional floating ability exceeded 24 h without floating lag time. Additionally, approximately 93.29% of AMT-drug was successfully encapsulated into the floatable coated polymeric beads. The AMT-drug burst release at pH.1.2 was meaningfully dwindled with increasing AmCs concentration up to 4%., while a prolonged release manner took place up to 25 h. Kinetically, the release mechanism obeyed Peppas-Sahlin model, while the Fickian diffusion was the dominant. The in vitro bio-evaluation assessments revealed that coated polymeric beads possessed excellent mucoadhesion percent reached 93.333%, potent antimicrobial activity and respectable biodegradability under the physiological enzymatic conditions. The cytotoxicity assessment confirmed the safety of the formulated floatable polymeric beads with cell viability reached 96%, suggesting their potential applicability as effectual mucoadhesive carriers for the oral delivery of antibiotics.

β-Glucan and Fatty Acid Based Mucoadhesive Carrier for Gastrointestinal Tract Specific Local and Sustained Drug Delivery.

The oral route is considered the most convenient route of drug administration for both systemic and local delivery. Besides stability and transportation, another unmet but important issue regarding oral medication is retention duration within the specific region of the gastrointestinal (GI) tract. We hypothesize that an oral vehicle that can adhere and maintain retention within the stomach for a longer duration can be more effective to treat stomach-related diseases. Therefore, in this project, we developed a carrier that is highly specific to the stomach and maintains its retention for a longer duration. We developed a vehicle composed of β-Glucan And Docosahexaenoic Acid (GADA) to observe its affinity and specificity to the stomach. GADA forms a spherical-shaped particle with negative zeta potential values that vary based on the feed ratio of docosahexaenoic acid. Docosahexaenoic acid is an omega-3 fatty acid that has transporters and receptors throughout the GI tract, such as CD36, plasma membrane-associated fatty acid-binding protein (FABP (pm)), and a family of fatty acid transport proteins (FATP1-6). The in vitro studies and characterization data showed that GADA has the capability to carry a payload of hydrophobic molecules and specifically deliver the payload to the GI tract, exert its therapeutic effects, and help to maintain stability for more than 12 h in the gastric and intestinal fluid. The particle size and surface plasmon resonance (SPR) data showed that GADA has a strong binding affinity with mucin in the presence of simulated gastric fluids. We observed a comparatively higher drug release of lidocaine in gastric juice than that in intestinal fluids, demonstrating the influence of the pH values of the media on drug-release kinetics. In vivo and ex vivo imaging of mice demonstrated that GADA maintains its retention within the stomach for at least 4 hr. This stomach-specific oral vehicle holds strong promise to translate various injectable therapeutic drugs to oral form upon further optimizations.

Nano-Spray-Dried Levocetirizine Dihydrochloride with Mucoadhesive Carriers and Cyclodextrins for Nasal Administration

Antihistamines such as levocetirizine dihydrochloride (LC) are commercially used in oral tablets and oral drops to reduce allergic symptoms. In this study, LC was nano-spray-dried using three mucoadhesive polymers and four cyclodextrin species to form composite powders for nasal administration. The product was composed of hydroxypropyl methylcellulose polymer, including LC as a zwitterion, after neutralization by NaOH, and XRD investigations verified its amorphous state. This and a sulfobutylated-beta-cyclodextrin sodium salt-containing sample showed crystal peaks due to NaCl content as products of the neutralization reaction in the solutions before drying. The average particle size of the spherical microparticles was between 2.42 and 3.44 µm, except for those containing a polyvinyl alcohol excipient, which were characterized by a medium diameter of 29.80 µm. The drug was completely and immediately liberated from all the samples at pH 5.6 and 32 °C; i.e., the carriers did not change the good dissolution behavior of LC. A permeability test was carried out by dipping the synthetic cellulose ester membrane in isopropyl myristate using modified horizontal diffusion cells. The spray-dried powder with β-cyclodextrin showed the highest permeability (188.37 µg/cm2/h), as this additive was the least hydrophilic. Products prepared with other cyclodextrins (randomly methylated-beta-cyclodextrin, sulfobutylated-beta-cyclodextrin sodium salt and (hydroxypropyl)-beta-cyclodextrin) showed similar or slightly higher penetration abilities than LC. Other polymer excipients resulted in lower penetration of the active agent than the pure LC.

Conjugates of Chitosan with β-Cyclodextrins as Promising Carriers for the Delivery of Levofloxacin: Spectral and Microbiological Studies.

In this work, we synthesized chitosan 5 kDa conjugates with β-cyclodextrins with various substituents as promising mucoadhesive carriers for the delivery of fluoroquinolones using the example of levofloxacin. The obtained conjugates were comprehensively characterized by spectral methods (UV-Vis, ATR-FTIR, 1H NMR, SEM). The physico-chemical properties of the complex formations were studied by IR, UV, and fluorescence spectroscopy. The dissociation constants of complexes with levofloxacin were determined. Complexation with conjugates provided four times slower drug release in comparison with plain CD and more than 20 times in comparison with the free drug. The antibacterial activity of the complexes was tested on model microorganisms Gram-negative bacteria Escherichia coli ATCC 25922 and Gram-positive Bacillus subtilis ATCC 6633. The complex with the conjugate demonstrated the same initial levofloxacin antibacterial activity but provided significant benefits, e.g., prolonged release.

Bio-Inspired Muco-Adhesive Polymers for Drug Delivery Applications.

Muco-adhesive drug delivery systems continue to be one of the most studied for controlled pharmacokinetics and pharmacodynamics. Briefly, muco-adhesive polymers, can be described as bio-polymers that adhere to the mucosal (mucus) surface layer, for an extended residency period of time at the site of application, by the help of interfacial forces resulting in improved drug delivery. When compared to traditional drug delivery systems, muco-adhesive carriers have the potential to enhance therapeutic performance and efficacy, locally and systematically, in oral, rectal, vaginal, amongst other routes. Yet, the achieving successful muco-adhesion in a novel polymeric drug delivery solution is a complex process involving key physico-chemico-mechanical parameters such as adsorption, wettability, polymer chain length, inter-penetration and cross-linking, to list a few. Hence, and in light of accruing progress, evidence and interest, during the last decade, this review aims to provide the reader with an overview of the theories, principles, properties, and underlying mechanisms of muco-adhesive polymers for pharmaceutics; from basics to design to characterization to optimization to evaluation to market. A special focus is devoted to recent advances incorporating bio-inspired polymers for designing controlled muco-adhesive drug delivery systems.

Enhanced Nasal Deposition and Anti-Coronavirus Effect of Favipiravir-Loaded Mucoadhesive Chitosan-Alginate Nanoparticles.

Favipiravir (FVR) is a repurposed antiviral drug for treating mild to moderate cases of the novel coronavirus disease 2019 (COVID-19). However, its poor solubility and permeability limit its clinical efficacy. To overcome its physicochemical and pharmacokinetic limitations, we statistically designed a mucoadhesive chitosan-alginate nanoparticles (MCS-ALG-NPs) as a new carrier for FVR using response surface methodology, which provided suitable characteristics for transmucosal delivery. The use of mucoadhesive polymers for intranasal administration promotes the residence time and contact of FVR in the mucus membrane. The optimized FVR-MCS-ALG-NPs demonstrated superior mucoadhesion, higher permeation and deposition in the nasal mucosa, and a significant increase in the inhibition of viral replication over 35-fold compared with free FVR. The overall results suggest that MCS-ALG-NPs could be used as an effective mucoadhesive carrier to enhance the activity of FVR against COVID-19.

Mucoadhesive carriers for oral drug delivery.

Among the various dosage forms, oral medicine has extensive benefits including ease of administration and patients' compliance, over injectable, suppositories, ocular and nasal. Despite of extensive demand and emerging advantages, over 50% of therapeutic molecules are not available in oral form due to their physicochemical properties. More importantly, most of the biologics, proteins, peptide, and large molecular drugs are mostly available in injectable form. Conventional oral drug delivery system has limitation such as degradation and lack of stability within stomach due to presence of highly acidic gastric fluid, hinders their therapeutic efficacy and demand more frequent and higher dosing. Hence, formulation for controlled, sustained, and targeted drug delivery, need to be designed with feasibility to target the specific region of gastrointestinal (GI) tract such as stomach, small intestine, intestine lymphatic, and colon is challenging. Among various oral delivery approaches, mucoadhesive vehicles are promising and has potential for improving oral drug retention and controlled absorption to treat local diseases within the GI tract, as well systemic diseases. This review provides the overview about the challenges and opportunities to design mucoadhesive formulation for oral delivery of therapeutics in a way to target the specific region of the GI tract. Finally, we have concluded with future perspective and potential of mucoadhesive formulations for oral local and systemic delivery.

Studies on Jackfruit-Okra Mucilage-Based Curcumin Mucoadhesive Tablet for Colon Targeted Delivery.

The present work investigates a blend of jack fruit mucilage (JFM) and okra mucilage (OKM) as promising mucoadhesive carriers for colon-specific delivery of a curcumin (CMN)-loaded mucoadhesive tablet (CMT) formulation. Formulation optimization was performed using central composite design (CCD) to further decipher the effect of varying proportions of the mucoadhesive carriers JFM and OKG on response factors such as drug release (% DR) and mucoadhesive strength (MA). The optimized formulation CMT (F14) demonstrated a favorable 54.35% in vitro release of CMN in 12 h with release kinetics resulting from a zero-order anomalous diffusion mechanism and MA of 34.1733 ± 1.26 g. Accelerated stability testing of CMT (F14) confirmed a shelf life of about 4.7 years. In vivo drug targeting studies performed using rabbit models in order to observe transit behavior (colon-specific delivery) of the dosage form were assessed by fluoroscopic images of the GI tract. Taking the results together, the results confirm that the combination of JFM and OKM could be exploited as an ideal mucoadhesive carrier for effective delivery of macromolecules to the colon.

Novel mucoadhesive carriers based on alginate-acrylamide hydrogels for drug delivery

New mucoadhesive two-component carriers for drug delivery based on synthetic acrylamide/diethylacrylamide and natural alginate hydrogels have been synthesized. The introduction of sodium alginate into polyacrylamide/ poly(diethylacrylamide) gels, followed by their crosslinking with metal ions, significantly changed structure and properties of hydrogels, such as swelling degree, drug capacity and drug release rate in physiological solution. The structure of the gels was characterized by FTIR spectroscopy and scanning electron microscopy.

Mannose-anchored quaternized chitosan/thiolated carboxymethyl chitosan composite NPs as mucoadhesive carrier for drug delivery

There are various challenges for the mucosal delivery of drug, which is largely attributed to the absence of effective drug carriers that can make delivery to mucosal sites. In the present study, we aimed to synthesize bifunctional mucoadhesive nanoparticles (NPs) that could be used for mucosal delivery. N-2-Hydroxypropyl trimethyl ammonium chloride chitosan (M-N-2-HACC) was modified with D-mannose, and N-acetyl-L-cysteine (NAC) was immobilized on the carboxymethyl chitosan (N-CMCS). The electrostatic interaction between the two substances was used to produce mannose-modified thiolated chitosan NPs (M-N-2-HACC/N-CMCS NPs). The NPs showed a particle size of 196.72 ± 0.45 nm and zeta potential of 17.12 ± 0.50 mV. Moreover, it demonstrated high hydrophilicity, enduring drug release, stability, safety, and mucosal adhesion, which contributed to the effectiveness of mucosal administration. Additionally, the NPs could be instantly absorbed by macrophages. Collectively, these results suggested that M-N-2-HACC/N-CMCS NPs could be used as a promising candidate for mucosal delivery.

Mucoadhesive phenylboronic acid conjugated chitosan oligosaccharide-vitamin E copolymer for topical ocular delivery of voriconazole: Synthesis, in vitro/vivo evaluation, and mechanism

Topical eye drops still face challenges of low-drug treatment effects and frequent dosing in ophthalmic applications due to the low preocular retention rate and low transcorneal permeability. Thus, we designed and synthesized a phenylboronic acid conjugated chitosan oligosaccharide-vitamin E copolymer (PBA-CS-VE) for use in mucoadhesive voriconazole (VRC)-loaded nanomicelles for fungal keratitis. In vitro mucin binding and ex vivo eyeball adhesion tests show that the copolymer has strong mucoadhesion. The transportation of coumarin-6 (C6) across a monolayer of HCE-T cells and 3D cell spheroids confirm the strong corneal penetration ability of PBA-CS-VE. The mechanism of promoting corneal penetration was studied in terms of intracellular calcium-ion concentration, cell membrane potential, cell membrane fluidity, and the tight junctions of cells. The pharmacokinetics in the aqueous humor were examined to evaluate the ability of nanomicelles in promoting corneal penetration and prolonging ocular retention. VRC-loaded PBA-CS-VE nanomicelles (PBA-CS-VE-VRC) yielded a very favorable therapeutic effect on a rabbit model of fungal keratitis in vivo as compared to the free drug. Overall, the results indicate that PBA-CS-VE nanomicelles are a mucoadhesive candidate with enhanced transcorneal permeability and prolonged preocular retention for efficient delivery of topical ocular drugs. Statement of significanceAlthough eye drops are widely used in ocular drug delivery, the disadvantages such as short retention time and weak corneal penetrating ability still seriously affect the therapeutic effect of the drug. Therefore, the mucoadhesive carrier seems to be an interesting strategy for ocular drug delivery. Herein, a novel phenylboronic acid conjugated chitosan oligosaccharide-vitamin E copolymer was designed and constructed as mucoadhesive nanomicelles loaded with voriconazole for fungal keratitis. These nanomicelles were able to improve the in vitro mucin binding and to prolong the residence time of the drug on the surface of the eyeball. Moreover, the nanomicelles exhibited an enhanced drug permeability in cell monolayer models and 3D cell culture models. This work provides a promising ocular drug delivery system.

Mucoadhesion and Mucopenetration of Cannabidiol (CBD)-Loaded Mesoporous Carrier Systems for Buccal Drug Delivery

Transmucosal drug delivery represents a promising noninvasive option when drugs are employed which have a low oral bioavailability like CBD. However, this concept can only be successful as long as the formulation provides sufficient buccal retention and mucosal penetration. In this study, mucoadhesive carrier systems were evaluated consisting of CBD-loaded silica (Aeroperl 300) carriers, mucoadhesive polymers (Hypromellose (HPMC), chitosan and carbomer) and propylene glycol as a penetration enhancer. Mucoadhesive effect, drug release and penetration ability were evaluated for each carrier system. The results show that the addition of HPMC and carbomer substantially improve mucoadhesion compared to pure CBD, with an increase of 16-fold and 20-fold, respectively. However, due to their strong swelling, HPMC and carbomer hinder the penetration of CBD and rely on co-administration of propylene glycol as an enhancer to achieve sufficient mucosal absorption. Chitosan, on the other hand, achieves an 8-fold increase in mucoadhesion and enhances the amount of CBD absorbed by three times compared to pure CBD. Thus, chitosan represents a promising polymer to combine both effects. Considering the results, the development of silica-based buccal drug delivery systems is a promising approach for the effective delivery of CBD.

Improved efficacy of Panax notoginseng saponin loaded into BSP/alginate microspheres for the treatment of alcoholic gastric ulcers

Previously, we have reported the evaluations of alginate and Bletilla striata polysaccharide (BSP) in formulation of microsphere, which is a muco-adhesive carrier and can achieve a long duration of gastric retention. The combination of Panax notoginseng (Burk.) and B. striata is a traditional Chinese herbal formula that is used to treat gastric ulcers. BSP, an effective ingredient of B. striata, possesses both medicinal and excipient functions. Panax notoginseng saponin (PNS), which can easily dissolve in water, is the main effective ingredient in P. notoginseng (Burk.) for the treatment of gastric ulcers. However, microspheres containing PNS could directly cause drug leakage, ultimately reducing the encapsulation rate. In this study, PNS was fabricated into a hydrophobic dispersion with slow-release characteristics. Subsequently, PNS was packaged into BSP/alginate microspheres to improve the encapsulation rate. The prepared PNS-loaded microspheres were round, the release characteristics aligned with the Weibull equation, and the active ingredients were released by diffusion and erosion. The developed microspheres improved the effects of PNS and synergistically exerted the pharmaceutical effects of BSP on acute gastric ulcers.

Sodium alginate-guar gum and carbopol based methotrexate loaded mucoadhesive microparticles for colon delivery: An in vitro evaluation

Methotrexate (MTX) is famous for its therapeutic potential against different cancers including colorectal cancer. Goal of the present investigation was to formulate MTX loaded mucoadhesive microparticles for colon targeting. The optimized formulation (MTX-MS2) was composed of mucoadhesive polymers (sodium alginate, guar gum and carbopol 940) in an appropriate ratio. MTXMS2 was developed by ionic-gelation method. The suitable particle size and zeta potential were found to be 21.10 ± 0.18 μm and 3.01 ± 0.16 mV for MTX-MS2 respectively. The % yield (98.60 ± 2.12), % entrapment efficiency (97.98 ± 1.22) and % drug loading (1.04 ± 0.03) were estimated for MTXMS2. The swelling index (0.99 ± 0.04 θ) and mucoadhesion (97.29 ± 4.61%) were significantly (***P ˂ 0.01) achieved with MTX-MS2 as compared to other formulations. The optimum drug release (96.07 ± 4.52%) was significantly achieved with MTX-MS2 at simulated gastric fluid (pH 7.4) for 36 h in a sustained manner. This profile may be attributed towards excellent mucoadhesivness of the polymers used in the formulation. Therefore, the current investigation suggests that mucoadhesive carrier system could be promising approach for colon delivery. Thus, the proposed work would be helpful for the treatment of colorectal cancer.

Manufacturing and characterisation of a novel composite dosage form for buccal drug administration.

The potential of alternative routes of application compared to the traditional oral route is constantly growing. Especially in transmucosal applications for the oral cavity, easy accessibility is an attractive feature with many new opportunities. The combination of a minitablet and a buccal mucoadhesive carrier film has been shown to enable safe and accurate drug administration compared to semi-solid formulations currently available on the market. In order to investigate these so-called composite dosage forms in more detail, two different manufacturing methods were compared within this study to investigate the resulting properties. The formulation development of the minitablets containing lidocaine, complying with the compendial requirements, resulted in immediate release using both manufacturing methods (more than 80% lidocaine release after 3-4min using direct incorporation, 7-8min by the gluing method). Differences in morphology and drug migration behaviour could be observed. The directly incorporated minitablets revealed a twofold higher drug migration (1.5mm) into the mucoadhesive shielding film within two weeks compared to the glued minitablets (0.8mm). These findings enable a further optimization of the formulation depending on the duration of the application and the feasibility for the addressed patient population.

Catechol-Functionalized Alginate Nanoparticles as Mucoadhesive Carriers for Intravesical Chemotherapy.

This research aimed to synthesize and evaluate mucoadhesive catechol-functionalized alginate (Cat-Alg) nanoparticles (NPs) for bladder cancer. Cat-Alg was synthesized using coupling chemistry, and the structure was verified using NMR and FT-IR. Cat-Alg NPs were generated by ionic gelation between the synthesized Cat-Alg and calcium chloride. Garcinia mangostana L. extract (GM extract) was entrapped into the NPs during particle formation. The physical characteristics, mucoadhesive properties, drug loading and release, cellular uptake, and anticancer activity of the GM extract-loaded NPs were investigated. The Cat-Alg NPs were spherical with sizes in the range of 155-186nm. The slightly negative surface charge of the NPs provided them with excellent stability. The Cat-Alg NPs could be retained on a porcine bladder mucosa to a greater extent compared with unmodified Alg NPs. High loading efficiency (71.6%) and loading capacity (292μg/mg) of GM extract in the NPs were achieved, and a constant release of GM extract was obtained for up to 8h with zero-order kinetics. Moreover, the GM extract-loaded NPs were deposited in bladder tissue and accumulated in MB49 cells at a higher rate compared with GM extract suspension. In addition, the NPs could kill a mouse urothelial carcinoma cell line with low IC50. Therefore, these NPs have the potential to be a mucoadhesive drug delivery system for bladder cancer treatment. However, additional in vivo investigations are needed for clinical application in cancer treatment. Graphical abstract.

Mucoadhesive Micro-/Nano Carriers in Ophthalmic Drug Delivery: an Overview

The eye is a challenging organ for ophthalmic drug delivery due to the barriers associated with the anterior and posterior segments like nasolacrimal drainage, blinking, induced lacrimation, impermeability of corneal epithelial membrane, and blood-ocular barrier. Although there are conventional approaches, such as eye drop, ointment, suspension, implants, and injection, they suffer from limitations of low bioavailability, poor patient compliance (due to invasive approach and repeated dosing), and potential for several side effects. This review explored the various mucoadhesive polymers, derivatized polymers, and different modification methods for such polymer derivatization (via carboxymethylation, thiolation, and quaternization) for their effective drug delivery toward ophthalmic application. Various types of micro and nanoparticulate systems of such derivatized mucoadhesive polymer-based carriers have been also exemplified and discussed here for their improved medicinal efficacy. To address the issues associated with conventional ophthalmic formulations, mucoadhesive drug delivery has been proposed. The emerging technologies play an important role in the development of more efficient mucoadhesive carriers obtained by derivatization or modification of core polymers with various functional groups such as carboxymethyl, amine, and new generation thiols. Mucoadhesive polymers form bonding with mucin (hydrogen, covalent, electrostatic bonding, etc.) and enhance corneal residence time and cellular uptake of the drug. Mucoadhesive carriers are designed to associate with the micro and nanoparticulate systems to overcome the ocular barriers with improved therapeutic efficacy.

Maleimide-functionalised PLGA-PEG nanoparticles as mucoadhesive carriers for intravesical drug delivery

Low permeability of the urinary bladder epithelium, poor retention of the chemotherapeutic agents due to dilution and periodic urine voiding as well as intermittent catheterisations are the major limitations of intravesical drug delivery used in the treatment of bladder cancer. In this work, maleimide-functionalised poly(lactide-co-glycolide)-block-poly(ethylene glycol) (PLGA-PEG-Mal) nanoparticles were developed. Their physicochemical characteristics, including morphology, architecture and molecular parameters have been investigated by means of dynamic light scattering, transmission electron microscopy and small-angle neutron scattering techniques. It was established that the size of nanoparticles was dependent on the solvent used in their preparation and molecular weight of PEG, for example, 105 ± 1 nm and 68 ± 1 nm particles were formed from PLGA20K-PEG5K in dimethyl sulfoxide and acetone, respectively. PLGA-PEG-Mal nanoparticles were explored as mucoadhesive formulations for drug delivery to the urinary bladder. The retention of fluorescein-loaded nanoparticles on freshly excised lamb bladder mucosa in vitro was evaluated and assessed using a flow-through fluorescence technique and Wash Out50 (WO50) quantitative method. PLGA-PEG-Mal nanoparticles (NPs) exhibited greater retention on urinary bladder mucosa (WO50 = 15 mL) compared to maleimide-free NPs (WO50 = 5 mL). The assessment of the biocompatibility of PEG-Mal using the slug mucosal irritation test revealed that these materials are non-irritant to mucosal surfaces.

Development and optimization of sustained release mucoadhesive composite beads for colon targeting

The present work investigates a blend of Linum Seed mucilage(LSM) and Hibiscus Leaf gum(HLG) as mucoadhesive carriers for Capecitabine(CPTB) loaded mucoadhesive composite bead formulation (CMB), in an attempt to achieve sustained release of CPTB (BCS Class I drug) in the colon region. Optimization using Box-Behnken Design(BBD) was used to study the effect of quantities of mucoadhesive carriers(LSM,HLG) and enteric polymer pectin (in curing solution) on response factors such as %drug loading (%DL) and %drug release (%DR). CMB prepared by ion-gelation technique showed uniform bead size, spherical surface morphology, maximum drug encapsulation efficiency. The optimized CMB(F18) exhibited maximum %drug loading(28.94%), favorable in vitro drug release of CPTB(54.43%) in 12 h, where, the release kinetics follow zero order non-Fickian diffusion mechanism. CMB's exhibited significantly higher swelling upon exposure to alkaline media than acidic media similarly ex vivo mucoadhesive study also revealed that major fraction of beads were washed off within 2 h in 1.2pH media whereas in 7.4pH alkaline media major portion of the beads remain adhered even after 24 h Moreover accelerated stability testing of CMB(F18) revealed shelf life of about 2.59 years. Hence the study confirms that the combination of LSM&HLG as ideal mucoadhesive carriers and can favorably target highly soluble drugs to the colon region.