Ms Pulse Duration Research Articles

Investigating ultra-high dose rate water radiolysis using the Geant4-DNA toolkit and a Geant4 model of the Oriatron eRT6 electron linac

Ultra-high dose rate FLASH radiotherapy, a promising cancer treatment approach, offers the potential to reduce healthy tissue damage during radiotherapy. As the mechanisms underlying this process remain unknown, several hypotheses have been proposed, including the altered production of radio-induced species under ultra-high dose rate (UHDR) conditions. This study explores realistic irradiation scenarios with various dose-per-pulse and investigates the role of pulse temporal structure. Using the Geant4 toolkit and its Geant4-DNA extension, we modeled the Oriatron eRT6 linac, a FLASH-validated electron beam, and conducted simulations covering four distinct dose-per-pulse scenarios – 0.17 Gy, 1 Gy, 5 Gy, and 10 Gy – all featuring a 1.8 µs pulse duration. Results show close agreement between simulated and experimental dose profiles in water, validating the eRT6 model for Geant4-DNA simulations. We observed important changes in the temporal evolution of certain species, such as the earlier fall in hydroxyl radicals (\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$^{ \\bullet } \ ext{O}\ ext{H}$$\\end{document}) and reduced production and lifetime of superoxide (\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${\ ext{O}}_{2}^{{\\bullet\\:}-}$$\\end{document}) with higher dose-per-pulse levels. The pulse temporal structure did not influence the long-term evolution of species. Our findings encourage further investigation into different irradiation types, such as multi-pulse configurations, and emphasize the need to add components in water to account for relevant cellular processes.

Efficient stabilizing agent-free synthesis of gold nanoparticles via square-wave pulse deposition for enhanced catalytic performance in ethanol electrooxidation

The pressing environmental concerns and the depletion of fossil fuel reserves necessitate a transition toward sustainable energy sources. Ethanol, a renewable biomass-derived fuel, is a promising alternative due to its availability and high energy density. This study investigates the synthesis of gold nanoparticles (AuNPs) via a square-wave pulse deposition technique, aiming to enhance catalytic activity for ethanol electrooxidation. By varying pulse durations, we were able to exert precise control over AuNP size and distribution without stabilizing agents. Characterization using field emission scanning electron microscopy and X-ray diffraction techniques confirmed the formation of clustered nanoparticles of metallic gold phase. Electrochemical characteristics analyses revealed that AuNPs synthesized with a 900 ms pulse duration exhibited the lowest charge transfer resistance and the highest electrochemically active surface area. The electrocatalytic performance test of these AuNPs demonstrated an anodic current density of 2.5 mA cm-2 and a Tafel slope of 78 mV dec-1, indicating superior catalytic performance and reaction kinetics. Additionally, the AuNPs showed high resistance to poisoning, as evidenced by a low jb/jf ratio of 0.28 and stable chronoamperometric response. These findings underscore the potential of this synthesis method for producing high-performance electrocatalysts utilized in exploiting ethanol's potential as an environmentally friendly energy carrier.

Optimization of electrical discharge machining parameters for enhanced performance on inconel 718 using Cu-Ni-B4C nanocomposite electrodes and advanced modeling techniques

Abstract This paper investigate into the complex field of electrical discharge machining (EDM) to improve material removal rate (MRR), electrode wear rate (EWR), and surface roughness (SR) for the machining of Inconel 718, a difficult-to-machine superalloy. The effects of discharge current, pulse duration, and pulse interval on machining performance were assessed through experiments. Response surface methodology (RSM) and artificial neural network (ANN) models, such as RNN, LSTM, and CNN, were used to optimize. Twenty runs of confirmation experiments were used to confirm the optimal process parameters found by the created models for better machining. For Inconel 718, the novel Cu-Ni-B4C nanocomposite electrode greatly enhanced EDM performance. The ideal configuration increased MRR while decreasing wear and surface roughness. Machined surfaces were inspected using SEM and EDAX analysis. With optimal settings of 50 μs pulse duration and 90 μs pulse interval, increasing current to 8 Amps increased MRR to 0.0118 g min−1, reducing EWR to 0.001 g min−1 and SR to 3.108 μm. Compared to the RNN, LSTM, and RSM models, the CNN model had the greatest R-squared (R2) score of 0.9999, suggesting greater MRR, EWR, and SR prediction.

Targeting delivery of miR-146a via IMTP modified milk exosomes exerted cardioprotective effects by inhibiting NF-κB signaling pathway after myocardial ischemia-reperfusion injury

Reperfusion therapy is critical for saving heart muscle after myocardial infarction, but the process of restoring blood flow can itself exacerbate injury to the myocardium. This phenomenon is known as myocardial ischemia-reperfusion injury (MIRI), which includes oxidative stress, inflammation, and further cell death. microRNA-146a (miR-146a) is known to play a significant role in regulating the immune response and inflammation, and has been studied for its potential impact on the improvement of heart function after myocardial injury. However, the delivery of miR-146a to the heart in a specific and efficient manner remains a challenge as extracellular RNAs are unstable and rapidly degraded. Milk exosomes (MEs) have been proposed as ideal delivery platform for miRNA-based therapy as they can protect miRNAs from RNase degradation. In this study, the effects of miR-146a containing MEs (MEs-miR-146a) on improvement of cardiac function were examined in a rat model of MIRI. To enhance the targeting delivery of MEs-miR-146a to the site of myocardial injury, the ischemic myocardium-targeted peptide IMTP was modified onto the surfaces, and whether the modified MEs-miR-146a could exert a better therapeutic role was examined by echocardiography, myocardial injury indicators and the levels of inflammatory factors. Furthermore, the expressions of miR-146a mediated NF-κB signaling pathway-related proteins were detected by western blotting and qRT-PCR to further elucidate its mechanisms. MiR-146 mimics were successfully loaded into the MEs by electroporation at a square wave 1000 V voltage and 0.1 ms pulse duration. MEs-miR-146a can be up-taken by cardiomyocytes and protected the cells from oxygen glucose deprivation/reperfusion induced damage in vitro. Oral administration of MEs-miR-146a decreased myocardial tissue apoptosis and the expression of inflammatory factors and improved cardiac function after MIRI. The miR-146a level in myocardium tissues was significantly increased after the administration IMTP modified MEs-miR-146a, which was higher than that of the MEs-miR-146a group. In addition, intravenous injection of IMTP modified MEs-miR-146a enhanced the targeting to heart, improved cardiac function, reduced myocardial tissue apoptosis and suppressed inflammation after MIRI, which was more effective than the MEs-miR-146a treatment. Moreover, IMTP modified MEs-miR-146a reduced the protein levels of IRAK1, TRAF6 and p-p65. Therefore, IMTP modified MEs-miR-146a exerted their anti-inflammatory effect by inhibiting the IRAK1/TRAF6/NF-κB signaling pathway. Taken together, our findings suggested miR-146a containing MEs may be a promising strategy for the treatment of MIRI with better outcome after modification with ischemic myocardium-targeted peptide, which was expected to be applied in clinical practice in future.

Impact of left bundle branch area pacing on right cardiac chambers dimensions and function. a medium term single center echocardiographic study

Abstract Introduction Left bundle branch area pacing (LBBAP) has become, in the last years, the preferred method for physiological pacing due to a wider target area, optimal pacing and sensing thresholds, and stable parameters over time. LBBAP ensures rapid and synchronous left ventricular (LV) activation through the left-sided conduction system. On the other hand, there is little data on right ventricular (RV) activation in LBBAP. The purpose of this study was to evaluate the impact of LBBAP on the right heart anatomy and function over a mid-term follow-up period. Material and methods All consecutive patients with successful LBBAP for bradyarrhythmic indications between February 2021 and July 2022 at our institution were eligible for this study. Left bundle branch capture was defined as a paced QRS complex of right bundle branch block morphology, and proof of transition from non-selective to selective capture with differential pacing maneuvers. To avoid confounders, patients with LV ejection fraction below 40% and with severe valvular disease were excluded. In the end, 57 patients were prospectively evaluated. Patient and procedural characteristics were recorded at baseline and follow-up. Also, right atrial (RA) volume, RV basal diameter, tricuspid annulus peak systolic elevation (TAPSE), RV S` wave (RVS`W), and tricuspid regurgitation (TR) were evaluated before the procedure and at the end of the follow-up period. Results The mean age of the patients was 68.9± 10 years, and 70% were males. 29.8% had a baseline right bundle branch block, and 22.8% had a left bundle branch block morphology. The baseline LV ejection fraction was 54.3 ± 9.9 %. The paced QRS duration was similar to the baseline values (128.5 ± 16.3 vs. 134.4 ± 30.4 msec, p=0.119). The pacing and sensing thresholds were 0.7 ± 0.3 V at 0.4 ms pulse duration and 9.7 ± 4.2 mV, respectively. The mean LV activation time (measured as the R wave peak time in V6) was 80.9 ± 12 msec, and the mean RV activation time (measured as the difference between QRS duration and LV activation time) was 51.9 ± 24.2 msec. The patients were followed over a mean period of 591.2 ± 150.3 days. There were no complications over the follow-up period that led to pacing interruption. The follow-up pacing (0.6 ± 0.2 V, p=0.003) and sensing (11.7 ± 6 mV, p= 0.023) thresholds showed significant improvement compared to the procedural values. The right heart echocardiographic evaluation showed non-statistically significant changes between the follow-up and the baseline values for RA volumes (57.9 ± 33.7 vs. 51.5 ± 28.4 ml, p=0.122), RV basal diameter (32.8 ± 5.4 vs. 31.8 ± 6.4 mm, p=0.31), RVS`W (12.8 ± 3.2 vs. 12.85 ± 2.7 cm/sec, p=0.933), and TR (1.8±0.8 vs. 2±1, p=0.07). On the other hand, there was a significant improvement in the TAPSE (22.2±4.3 vs. 20.7±3.6 mm, p=0.021). Conclusions LBBAP was associated with preserved dimensions and function of the right cardiac chambers over a medium-term follow-up period.

Attachment of Fibrinogen on Ion Beam Treated Polyurethane.

Protein-stable coverage of the artificial implant is a key problem for biocompatibility. In the present study, a protein layer was attached covalently to a polyurethane surface treated by an ion beam. A plasma system consisting of a vacuum chamber (0.8 Pa pressure) with a high voltage electrode powered by a short pulse (20 μS pulse duration and 200 Hz pulse repetition) generator was designed. Polyurethane with a formulation certified as a material for medical implants was treated by nitrogen ions with an energy of 20 keV and 5 × 1014-1016 ions/cm2 fluence range. Wettability measurements, X-ray photoelectron, Raman, Fourier transform infrared attenuated total reflection, and ellipsometry spectra showed a significant change in the structure of the surface layer of the treated polyurethane. The surface of the treated polyurethane contained a carbonised layer containing condensed aromatic clusters with terminal free radicals. The surface energy of polyurethane surface increased from 33 to 65 mJ/m2. The treated polyurethane surface became capable of adsorbing and chemically binding protein (fibrinogen). The designed system for ion beam treatment can be used for surface activation of biomedical polymer devices, where a total protein coverage is required.

The combined effect of neuro-modulation and neuro-stimulation on pain in patients with cervical radiculopathy – a double-blinded, two-arm parallel randomized controlled trial

Introduction Cervical radiculopathy is one of those disabling conditions which results in central and peripheral pain and thus affects the quality of life. Transcutaneous Electrical Nerve Stimulation (TENS) and exercises produce analgesic effect but their long-term effect has not been available to date. Transcranial Direct Current stimulation (tDCS) is known to produce promising effects on central pain by targeting cortical activity. Purpose To determine the combined effect of tDCS and TENS with exercises on pain and quality of life in patients with cervical radiculopathy. Method Forty four patients (male: female = 26:18) of the age group 18–50 years were recruited and randomly allocated into the experimental group and control group. The experimental group received active anodal tDCS for 20 min with an intensity of 2 mA, while the control group received sham anodal tDCS. TENS over the pain distribution area for 20 min with 5 Hz intensity and 80-150 ms pulse duration followed by neck-specific exercises were given in both groups. This protocol was given 5 days a week for 4 weeks. Pre and post-assessments were obtained through outcome measures that the Numeric Pain Rating Scale and Neck Disability Index for the measurement of pain, functional disability, and quality of life. Result Paired t-test/Wilcoxon-Signed Rank test, and Index and Mann–Whitney U test were used to compare the demographic variables within and across the groups, respectively for Neck Disability for Numeric Pain Rating Scale, keeping the P-value < 0.05 as significant. One-way repeated-measures analysis of variance (ANOVA) was applied to determine the between-subject factor differences. Post hoc tests with Bonferroni correction for repeated analyses were performed. Results depicted a significant effect for NDI (P = 0.001 for both groups) and NPRS (P = 0.003 for the experimental group and 0.007 for the control group). Significant Interaction effect (time*group) was observed for NDI (F = 42, 5382.77) and NPRS (F = 42, 1844.57) with a P-value of 0.001 for both outcome measures. Clinical significance was observed for both outcome measures having a mean difference in 50.21 and 4.57 for NDI and NPRS, respectively compared with the established MCID of 13.2 and 2.2 scores for respective outcome measures. Conclusion It was concluded that active tDCS along with TENS and exercise intervention was effective on pain, disability, and quality of life in patients with cervical radiculopathy.

New Electromagnetic Threat Protection Systems

The issues discussed in the article refer to a new category of military operations - electronic warfare (EW). In the context of EW, the high-power microwave (HPM) technology currently enables remote disturbances of operations lasting until the circuit is reset or the electronic system is destroyed. The article examines the problem of protection and defence against using HPM pulses. The research used a compact HPM generator developed at the Polish National Centre for Nuclear Research. It has a power of 3MW, an operating frequency of 2.9 GHz and a 3 μs pulse duration, emitted with a repetition rate of 1, 50, 100 and 250 Hz. The developed HPM pulse protection systems were subjected to intense field exposure in the open space of the training ground, in its land and sea sections, and in the circuit with a reverberation chamber. The distribution of the generated field on each measurement station was tested using a high-power D-dot probe, from which the data was transferred to the recording system via an optical fibre link. In all cases, this distribution turned out to be repetitive. The field probe with a logger was used for measurements inside composite structures. Unprotected electronic systems in hobby drones, mobile phones, cameras and systems using sensors based on micro-mechanical units were exposed. An analysis was conducted to check the operation of electronic circuits, effects caused and phenomena occurring during exposures to intense microwave radiation. It was found that the developed system meets the design assumptions in conditions similar to actual exposure to HPM weapons. Screening efficiency has been determined for various spatial configurations of radiation beam incidence. The presented systems for the protection and defence against the effects of HPM weapons implemented in the technology of composite hybrid absorbers enable effective elimination of electromagnetic pulse effects.

Impact of Electric Field Pulse Duration on Ferroelectric Hafnium Zirconium Oxide Thin Film Capacitor Endurance

While ferroelectric HfO2 shows promise for use in memory technologies, limited endurance is one factor that challenges its widespread application. Herein, endurance is investigated through field cycling W/Hf0.5Zr0.5O2/W capacitors above the coercive field while manipulating the time under field using bipolar pulses of varying pulse duration or duty cycle. Both remanent polarization and leakage current increase with increasing pulse duration. Additionally, an order of magnitude decrease in the pulse duration from 20 to 2 μs results in an increase in endurance lifetime of nearly two orders of magnitude from 3 × 106 to 2 × 108 cycles. These behaviors are attributed to increasing time under field allowing for charged oxygen vacancy migration, initially unpinning domains, or driving phase transformations before segregating to grain boundaries and electrode interfaces. This oxygen vacancy migration causes increasing polarization before creating conducting percolation paths that result in degradation and premature device failure. This process is suppressed for 2 μs pulse duration field cycling where minimal wake‐up and lower leakage before device failure are observed, suggesting that very short pulses can be used to significantly increase device endurance. These results provide insight into the impact of pulse duration on device performance and highlight consideration of use of conditions when endurance testing.

Abstract 17051: Oxytocin Receptor in the Spinal Neuraxial Modulation of Ventricular Excitability

Introduction: Cardiac sympathoexcitation is a major contributor to the pathogenesis of ventricular tachyarrhymias (VTs) during ischemia reperfusion (I/R) and chronic myocardial infarction (MI). Afferent network connections in the intermediolateral cell column (IML) and dorsal horn (DH) control sympathetic output to the heart. Our team reported spinal cord stimulation (SCS), decreased cardiac sympathoexcitation and reduced VTs during ischemia. Oxytocin (OXT) is a known neuromodulator; however, whether OXT signaling can modulate the cardiospinal neural network is unknown. Hypothesis: SCS neuromodulation is reducing sympathoexcitation and VTs through OXT signaling pathways. Methods: Two models of cardiac ischemia were used in Yorkshire domestic swine. In acute I/R, a suture was placed around the left anterior descending (LAD) coronary artery, after sternotomy. Chronic infarction (MI) was created by accessing the femoral with fluoroscopy guidance. Polystyrene microspheres (1ml) were injected via a 3mm angioplasty balloon catheter to the LAD. Animals then recovered post-MI for 6-8wk. SCS treatment was delivered through a four-pole lead which was inserted in the epidural space (T1-T4)(50Hz, 0.4ms pulse duration). T2-T4 spinal cord was collected postmortem for molecular analysis. Fluorescence in situ hybridization (FISH) protocol for RNAscope Fluorescent v2 Assay (ACD) was followed. Cell counts represented as 3 puncta or more centered around DAPI. Results: We report that OXT receptor positive cells significantly decreased as a result of I/R and MI (p&lt;0.001, two-way ANOVA n=4-5 animals, average of 2-3 slices per animal). Within the DH the majority of OXT positive cells were inhibitory GABAergic neurons. Within the IML, a majority of the cells regulated by I/R and MI were microglia, and both an inhibitory and excitatory population contributed to the onset of ischemia. SCS treatment after I/R and MI resulted in the recovery of this OXT receptor cell population. Conclusions: By evaluating the role of OXT in reducing cardiac sympathoexcitation at the level of the spinal cord, we provide new insights into optimizing current neuromodulation approaches and developing new pharmacologic therapies.

Long-term longitudinal retinal changes after conventional and pattern scan laser panretinal photocoagulation in diabetic retinopathy

PurposeComparison the effect of conventional and pattern scan laser (PASCAL) panretinal photocoagulation (PRP) on macula and optic disk in diabetic retinopathy (DR). MethodsThis retrospective study included 57 patients. In the conventional laser group, PRP was completed using the LightMed LightLas 532 laser device in accordance with the ETDRS protocol. In the pattern laser group, it was completed in a single session using PASCAL device with 20 ms pulse duration and multispot pattern. Central macular thickness (CMT) and retinal nerve fiber layer (RNFL) thickness were evaluated before laser treatment and at 1, 6 and 12 months after treatment. ResultsThere were 30 eyes in the conventional laser group and 27 eyes in the PASCAL group. There was no significant difference between the groups in terms of age (p = 0.560), sex (p = 0.866), duration (p = 0.498) and stage (p = 0.503) of diabetes, visual acuity (p = 0.104) and intraocular pressure (p = 0.963).In both groups, CMT increased significantly (p ˂0.001), while RNFL thickness decreased significantly (p ˂0.001) at 12 months. While CMT and mean RNFL thickness increased in the first month in both groups, it decreased progressively until the 12th month. ConclusionConventional and pattern laser systems used in the treatment of DR................ cause an increase in CMT and thinning of RNFL thickness in the long term. This change is more in the conventional laser group compared to the pattern laser.

Enhancement of cell attachment on Ti6Al4V via surface modifications using pulsed laser surface melting

The surface topography of biomedical implants made of Ti6Al4V significantly impacts cell attachment. This work aims to modify the surface topography of the Ti6Al4V surface using pulse laser surface melting (pLSM) to enhance fibroblast cell attachment. In pLSM, short laser pulses irradiate the surface resulting in localised melting and creating new features upon resolidification. Thus, surfaces are modified without the addition or removal of material. The effect of laser pulse duration and hatch spacing on the attachment of NIH3T3 fibroblast cells is examined in this study. The cells were cultured on the pLSM-textured surfaces and two control surfaces, viz., as-received and manually polished, and the results were studied after 24 h of cell culture using fluorescence microscopy. pLSM-textured surfaces showed improved cell attachment compared to the control surfaces. The surface textured with a 10 μs pulse duration and 75 % hatch spacing showed 395 % and 91 % improvement in attached cell density compared to the as-received surface and manually polished surface, respectively, because the induced feature size was comparable to the size of NIH3T3 fibroblast cells. Additionally, the periodic textures developed by pLSM resulted in a homogenous distribution of the cells across the area.

Efficacy of 1064 nm Photobiomodulation Dosimetry Delivered with a Collimated Flat-Top Handpiece in the Management of Peripheral Facial Paralysis in Patients Unresponsive to Standard Treatment Care: A Case Series.

Peripheral facial paralysis (PFP) is a common condition where oxidative stress (OS) is involved in the pathophysiology of facial paralysis, inhibiting peripheral nerve regeneration, which can be featured in Bell's palsy, Ramsay Hunt syndrome and Lyme disease. The current standard care treatments lack consensus and clear guidelines. Hence, the utilization of the antioxidant immunomodulator photobiomodulation (PBM) can optimize clinical outcomes in patients who are unresponsive to standard care treatments. Our study describes three unique cases of chronic PFP of various origins that were unresponsive to standard care treatments, but achieved a significant and complete recovery of facial paralysis following PBM therapy. Case presentations: Case #1: a 30-year-old male who presented with a history of 12 years of left-side facial paralysis and tingling as a result of Bell's palsy, where all the standard care treatments failed to restore the facial muscles' paralysis. Eleven trigger and affected points were irradiated with 1064 nm with an irradiance of ~0.5 W/cm2 delivered with a collimated prototype flat-top (6 cm2) in a pulsed mode, with a 100 µs pulse duration at a frequency of 10 Hz for 60 s (s) per point. Each point received a fluence of 30 J/cm2 according to the following treatment protocol: three times a week for the first three months, then twice a week for another three weeks, and finally once a week for the following three months. The results showed an improvement in facial muscles' functionality (FMF) by week two, whereas significant improvement was observed after 11 weeks of PBM, after which the House-Brackmann grading scale (HBGS) of facial nerve palsy dropped to 8 from 13 prior to the treatment. Six months after PBM commencement, electromyography (EMG) showed sustainability of the FMF. Case #2: A five-year-old female who presented with a 6-month history of severe facial paralysis due to Lyme disease. The same PBM parameters were utilized, but the treatment protocol was as follows: three times a week for one month (12 consecutive treatment sessions), then the patient received seven more sessions twice a week. During the same time period, the physiotherapy of the face muscles was also delivered intensively twice a week (10 consecutive treatments in five weeks). Significant improvements in FMF and sustainability over a 6-month follow-up were observed. Case #3: A 52-year-old male who presented with severe facial palsy (Grade 6 on HBGS) and was diagnosed with Ramsay Hunt syndrome. The same laser parameters were employed, but the treatment protocol was as follows: three times a week for three weeks, then reduced to twice a week for another three weeks, then weekly for the next three months. By week 12, the patient showed a significant FMF improvement, and by week 20, complete FMF had been restored. Our results, for the first time, showed pulsed 1064 nm PBM delivered with a flat-top handpiece protocol is a valid and its treatment protocol modified, depending on the origin and severity of the condition, which is fundamental in optimizing facial paralysis recovery and alleviating neurological symptoms. Further extensive studies with large data are warranted to validate our PBM dosimetry and treatment protocols.

The Variation of Electrical Pulse Duration Elicits Reliable Network-Mediated Responses of Retinal Ganglion Cells in Normal, Not in Degenerate Primate Retinas.

This study aims to investigate the efficacy of electrical stimulation by comparing network-mediated RGC responses in normal and degenerate retinas using a N-methyl-N-nitrosourea (MNU)-induced non-human primate (NHPs) retinitis pigmentosa (RP) model. Adult cynomolgus monkeys were used for normal and outer retinal degeneration (RD) induced by MNU. The network-mediated RGC responses were recorded from the peripheral retina mounted on an 8 × 8 multielectrode array (MEA). The amplitude and duration of biphasic current pulses were modulated from 1 to 50 μA and 500 to 4000 μs, respectively. The threshold charge density for eliciting a network-mediated RGC response was higher in the RD monkeys than in the normal monkeys (1.47 ± 0.13 mC/cm2 vs. 1.06 ± 0.09 mC/cm2, p < 0.05) at a 500 μs pulse duration. The monkeys required a higher charge density than rodents among the RD models (monkeys; 1.47 ± 0.13 mC/cm2, mouse; 1.04 ± 0.09 mC/cm2, and rat; 1.16 ± 0.16 mC/cm2, p < 0.01). Increasing the pulse amplitude and pulse duration elicited more RGC spikes in the normal primate retinas. However, only pulse amplitude variation elicited more RGC spikes in degenerate primate retinas. Therefore, the pulse strategy for primate RD retinas should be optimized, eventually contributing to retinal prosthetics. Given that RD NHP RGCs are not sensitive to pulse duration, using shorter pulses may potentially be a more charge-effective approach for retinal prosthetics.

A Direct Impact Tension Bar setup for testing low-impedance materials at intermediate rates of strain

This study introduces a Hopkinson bar variation, well-suited for probing low-impedance materials in the intermediate strain-rate regime. Currently, servo-hydraulic machines (SHM) and drop weight towers are considered primary for measuring mechanical properties at strain-rates 101 to 102/s. However, such setups often exhibit detrimental oscillations due to inertial response. These oscillations can be severe, rendering recorded data unreliable for inferring strain-rate effects. Our Direct Impact Tension Bar (DITB) offers accurate force signals devoid of ringing artefacts. The setup has a long 16 ms pulse duration, facilitating intermediate strain-rate tensile tests on extended ductile specimens. We discuss the DITB construction breakdown and demonstrate its applicability through dynamic tensile tests on sheet-type polycarbonate (PC) specimens at 150/s, compared to servo-hydraulic data. DITB results yield high-quality data, free from oscillations.

The influence of pulse duration and duty cycle on the energy flux to the substrate in high power impulse magnetron sputtering

The paper focuses on measurements of the total energy flux and normalized energy flux onto the substrate during high power impulse magnetron sputtering (HiPIMS) in a wide range of the pulse duration and discharge current. Al, Cr and Ti targets with a diameter 76 mm are used for sputtering. HiPIMS parameters include 1 kW discharge power, 15 to 150 А discharge current, 0.4–10 kHz pulse frequency, and 5–100 μs pulse duration. It is shown that the use of short pulses leads to ∼40 and 70% growth in the total energy flux onto floating and biased (−100 V) substrates, respectively. The energy per unit volume of the deposited coating increases by several times, if the pulse duration and the duty cycle are reduced. The paper examines reasons for the increased total and normalized energy fluxes onto the substrate observed after the pulse parameter modulation in the sputtering process.

Transcranial focused ultrasound stimulation of cortical and thalamic somatosensory areas in human.

The effects of transcranial focused ultrasound (FUS) stimulation of the primary somatosensory cortex and its thalamic projection (i.e., ventral posterolateral nucleus) on the generation of electroencephalographic (EEG) responses were evaluated in healthy human volunteers. Stimulation of the unilateral somatosensory circuits corresponding to the non-dominant hand generated EEG evoked potentials across all participants; however, not all perceived stimulation-mediated tactile sensations of the hand. These FUS-evoked EEG potentials (FEP) were observed from both brain hemispheres and shared similarities with somatosensory evoked potentials (SSEP) from median nerve stimulation. Use of a 0.5 ms pulse duration (PD) sonication given at 70% duty cycle, compared to the use of 1 and 2 ms PD, elicited more distinctive FEP peak features from the hemisphere ipsilateral to sonication. Although several participants reported hearing tones associated with FUS stimulation, the observed FEP were not likely to be confounded by the auditory sensation based on a separate measurement of auditory evoked potentials (AEP) to tonal stimulation (mimicking the same repetition frequency as the FUS stimulation). Off-line changes in resting-state functional connectivity (FC) associated with thalamic stimulation revealed that the FUS stimulation enhanced connectivity in a network of sensorimotor and sensory integration areas, which lasted for at least more than an hour. Clinical neurological evaluations, EEG, and neuroanatomical MRI did not reveal any adverse or unintended effects of sonication, attesting its safety. These results suggest that FUS stimulation may induce long-term neuroplasticity in humans, indicating its neurotherapeutic potential for various neurological and neuropsychiatric conditions.

Success Rate of Direct Pulp Capping with Conventional Procedures Using Ca (OH)2 and Bioactive Tricalcium Silicate Paste vs. Laser-Assisted Procedures (Diode 980 nm, CO2, and Er: YAG)

Direct pulp capping (DPC) is reliable in pulp exposure management. Objective: This study aimed to assess the success rate of DPC materials and different laser protocols. The included procedures were CO2 laser (n = 1147), Er: YAG laser (n = 69), and 980 nm diode laser (n = 124), on the one hand, and Ca (OH)2 (n = 376) and bioactive tricalcium silicate paste, on the other (n = 279). Materials and methods: Data from 1995 DPC cases were included. For laser groups, irradiation was used to coagulate the pulp exposure followed by Ca (OH)2 placement. Data with follow-up at 12, 24, and 36 months post-treatment were included. The irradiation parameters for the CO2 laser were as follows: energy density per pulse of 141 J/cm², 1 W power, 0.3 mm beam diameter, 100 ms pulse duration, and 1 Hz, and a series of five pulses maximum were delivered during 5 s. For the 980 diode lasers: 1.5 W power, continuous wave (CW), 400 μm fiber diameter, contact mode, 190.98 W/cm2 power density, and total delivered energy density of 2387 J/cm2. For the Er: YAG laser: 0.5 W output power, 9.95 J/cm2 energy density, a beam diameter of 0.8 mm, 300 µsec pulse duration, 10 Hz, non-contact mode, irradiation with air without water spray, and an average irradiation time of 8–10 s. Results: At the 3-year follow-up, the success percentages were as follows: CO2 (88.01%) &gt; Ca (OH)2 (75.72%) &gt; diode (70.01%) &gt; Er: YAG (54.55%) &gt; bioactive tricalcium silicate paste (51.1%). The timing of permanent filling (immediate or delayed), patient age, size of pulp exposure, tooth type, and exposure etiology significantly affected the success rate. Patients aged ≤ 35 years presented higher success (70.91%) compared to those ≥ 36 years (61.2%). Immediate permanent fillings increase the success rate (71.41%) compared to delayed permanent fillings (65.93%). Exposure in molars and premolars significantly lowers the success rate (60.3%) compared to canines and incisors (72.1%). Idiopathic pulp exposure presented higher success (72.58%) compared to caries-related causes (63.7%). Conclusion: The highest success rate was in the CO2 laser group followed by the diode and Ca (OH)2, Er: YAG, and bioactive tricalcium silicate material (biodentine) groups. The age factor, filling timing, size of exposure, tooth type, and exposure etiology can significantly affect the success rate of DPC.

Structure, spectroscopy and laser performance of an Er:YGGAG crystal.

In this work, we report on investigations of structure, spectroscopic properties and laser performances of, what we believe to be, a novel Er:YGGAG laser crystal. High crystalline quality is proved by an FWHW of XRC of 0.019°. Thermal conductivity of a 30 at.% Er:YGGAG crystal is determined as 4.98 W/(m·K). The refractive index is measured in the range of 400 to 1000 nm and fitting with Sellmeier equation is done. A broad fluorescence emission band is located at 2786∼2819 nm, suggesting that this crystal is favorable to realize tunable and ultrafast laser. Under the pump at 969 nm with a fiber-coupled diode laser, at 400 Hz repetition rate and 600 µs pulse duration, the 30 at.% Er:YGGAG delivered maximum average power of 506 mW with overall optical-to-optical efficiency of 12.4% and slope efficiency of 16.9%. The laser beam quality was characterized by M2 factors of 1.53 and 1.39 in horizontal and vertical directions, respectively.

Selective Activation of Cells by Piezoelectric Molybdenum Disulfide Nanosheets with Focused Ultrasound.

An accurate method for neural stimulation within the brain could be very useful for treating brain circuit dysfunctions and neurological disorders. With the aim of developing such a method, this study investigated the use of piezoelectric molybdenum disulfide nanosheets (MoS2 NS) to remotely convert ultrasound energy into localized electrical stimulation in vitro and in vivo. The application of ultrasound to cells surrounding MoS2 NS required only a single pulse of 2 MHz ultrasound (400 kPa, 1,000,000 cycles, and 500 ms pulse duration) to elicit significant responses in 37.9 ± 7.4% of cells in terms of fluxes of calcium ions without detectable cellular damage. The proportion of responsive cells was mainly influenced by the acoustic pressure, number of ultrasound cycles, and concentration of MoS2 NS. Tests using appropriate blockers revealed that voltage-gated membrane channels were activated. In vivo data suggested that, with ultrasound stimulation, neurons closest to the MoS2 NS were 3-fold more likely to present c-Fos expression than cells far from the NS. The successful activation of neurons surrounding MoS2 NS suggests that this represents a method with high spatial precision for selectively modulating one or several targeted brain circuits.