Morselized Bone Graft Research Articles

Masquelet Technique: Visualization of Cement Spacer Utilizing Methylene Blue

Masquelet Technique: Visualization of Cement Spacer Utilizing Methylene Blue

Uncemented total hip replacement with impaction bone grafting in protrusio acetabuli

Protrusio acetabuli is a central acetabular defect resulting from migration of femoral head medial to Kohler’s line. Idiopathic central displacement of femoral head within the acetabulum is quite rare. However, it may be seen in arthritic hips secondary to rheumatoid arthritis, ankylosing spondylitis, previous trauma, osteomalacia, etc. Primary Total Hip Replacement (THR) in such cases is difficult because of the deficient medial bone, decreased peripheral bony support to the acetabular component and proximal and medial migration of the joint centre. Several techniques described previously in the surgical management of protrusio acetabuli include cemented acetabular components with cement alone or in association with morselized bone graft to reconstruct the acetabulum. However, cement has high rates of migration and loosening of cemented acetabular components in young patients leads to more revision surgeries within the first decade of implantation. The purpose of the study is to describe the technique and results of using impacted morselized bone graft with a porous coated cementless acetabular component in patients with protrusio acetabuli.A total of 20 primary THR’s (10 unilateral and 5 bilateral) in 15 patients (8 females and 7 males) with protrusio acetabuli were performed between 2018 and 2021, out of which 4 had mild,7 had moderate and 9 had a severe grade of protrusion. A total of 10 hips were affected by rheumatoid arthritis,3 by ankylosing spondylitis and 7 had unknown etiology. After the surgery, all bone grafts had united by the sixth month with no perceptible change in acetabular component position in any case. The mean preoperative Harris Hip Score was 48 which improved to 82 at the latest follow-up. 45% had excellent,33% had good, and 22% had fair results. There was no dislocation. The use of impacted morselized autograft with a cementless porous acetabular component is a good technique of restoration of hip biomechanics and sound fixation in cases of protrusio acetabuli.

Midterm Follow Up of Acetabular Reconstruction of Dysplastic Hips using Structural and/or Morselized Bone Graft in Primary Total Hip Arthroplasty

Midterm Follow Up of Acetabular Reconstruction of Dysplastic Hips using Structural and/or Morselized Bone Graft in Primary Total Hip Arthroplasty

Canadian Spine Society

# Abstract 57. Radiographic reporting in adolescent idiopathic scoliosis: Is there a discrepancy comparing radiologists’ reports and surgeons’ assessments? {#article-title-2} Cobb angle measurement is the standard method for quantification of scoliosis in adolescent idiopathic scoliosis (AIS),

Comparison of clinical and radiological outcomes of local morselized bone grafts and structural iliac bone grafts in the treatment of lumbar tuberculosis with posterior-only surgery

BackgroundMany surgeons have reported results similar to those of anterior debridement and bone grafting in treating spinal tuberculosis in the lumbar region using only a posterior approach. However, there is still no consensus regarding bone graft methods. This study aims to compare the clinical and radiological outcomes of morselized versus structural iliac bone grafts in the treatment of lumbar tuberculosis via one-stage posterior surgery.MethodsA retrospective study was performed with 82 patients with lumbar tuberculosis who had undergone posterior-only debridement, bone grafting, and instrumentation between January 2014 and June 2018. Morselized bone grafts were used in 43 patients, whereas structural iliac bone grafts were used in 39 patients. The clinical data and imaging results of the patients were compared between the two groups to evaluate the clinical effects of the two types of grafts.ResultsThe operation time, blood loss and hospital stay values in the morselized bone group were significantly lower than those in the structural iliac bone group (p < 0.05). No significant differences were observed with respect to erythrocyte sedimentation rate (ESR), C-reactive protein (CRP), Cobb angle, or improvement of neurological function between the two groups. The VAS pain scores for low back and leg pain decreased significantly after the operation (p < 0.05). However, postoperatively, the VAS score was higher in the structural iliac bone group than in the morselized bone group, and there was no significant difference at the last follow-up between the two groups (p > 0.05). Bone fusion was achieved in 41 patients (95%) in the morselized bone group and 38 patients (97%) in the structural iliac bone group. There was no significant difference between the fusion rates of the two groups (p > 0.05).ConclusionThe two graft techniques achieved comparable clinical outcomes in lumbar spinal tuberculosis treatment. However, the morselized bone graft was more beneficial in terms of reducing surgical trauma and postoperative complications.

Fibular Strut Autograft as an Augmented Biological Plate: A New Modified Technique for Tibiocalcaneal Arthrodesis With Intramedullary Nail

Fibular Strut Autograft as an Augmented Biological Plate: A New Modified Technique for Tibiocalcaneal Arthrodesis With Intramedullary Nail

Locally Delivered Ascorbic Acid and β-Glycerophosphate Augment Local Bone Graft in a Murine Model of 2-Level Posterior Spinal Fusion.

Ascorbic acid is involved in collagen biosynthesis and upregulates alkaline phosphatase, potentially alleviating cell senescence and stimulating mesenchymal stem cell proliferation and differentiation into osteoblasts. We hypothesized locally delivered ascorbic acid and β-glycerophosphate act as a bone graft extender to increase the volume of new bone formed in a murine model of posterior lumbar fusion. Collagen sponges were used as delivery vehicles. Sponges were prepared with primary media alone or with the addition of ascorbic acid and β-glycerophosphate. Fresh morselized bone graft from 12 donor mice was used. Twenty-four healthy male C57BL/6 mice underwent an uninstrumented posterior L3-L5 lumbar fusion. One control group received morselized bone only. A second "sponge control" group received morselized bone with the control collagen sponge. The third group received morselized bone and a collagen sponge with ascorbic acid and β-glycerophosphate. Three months postoperatively, the lumbar spine underwent high-resolution micro-computed tomography for analysis of bone formation, density, and bridging fusion. Animals receiving ascorbic acid and β-glycerophosphate had a statistically significant increase in corrected bone volume compared with control and sponge groups, with a 56.3% and 25.4% increase, respectively. Mineralized bone fraction was statistically significantly decreased for animals in the ascorbic acid group compared with control and sponge groups. There was no significant difference in fusion rate between test groups. Locally delivered ascorbic acid and β-glycerophosphate in a murine model of posterior spinal fusion yielded statistically significant increases in new bone formation in the lumbar spine but statistically significant decreases in mineralized bone fraction. Differences in fusion rate were not statistically significant. This study provides early data suggesting that delivery of ascorbic acid to a spinal fusion site may be beneficial but does not yet establish an indication for clinical use. Further studies are needed to determine optimal dose and delivery of ascorbic acid.

Masquelet's induced membrane technique: Review of current concepts and future directions.

Masquelet's induced membrane technique (MIMT) is a relatively new, two-stage surgical procedure to reconstruct segmental bone defects. First performed by Dr. Masquelet in the mid-1980s, MIMT has shown great promise to revolutionize critical-sized bone defect repair and has several advantages over its alternative, distraction osteogenesis (DO). Also, its success in extremely challenging cases (defects > 15 cm) suggests that its study could lead to discovery of novel biological mechanisms that might be at play during segmental defect healing and fracture non-union. MIMT's advantages over DO have led to a world-wide increase in MIMT procedures over the past decades. However, MIMT often needs to be repeated and so the average initial success rate in adults lags significantly behind that of DO (86% vs 95%, respectively). The autologous foreign-body membrane created during the first stage by the immune system's response to a polymethyl methacrylatebone cement spacer is critical to supporting the morselized bone graft implanted in the second stage. However, the biological and/or physical mechanisms by which the membrane supports graft to bone union are unclear. This lack of knowledge makes refining MIMT and improving the success rates through technique improvements and patient selection a significant challenge and hinders wider adoption. In this review, current knowledge from basic, translational, and clinical studies is summarized. The dynamics of both stages under normal conditions as well as with drug or material perturbations is discussed along with perspectives on high-priority future research directions.

Primary Stability of Revision Acetabular Reconstructions Using an Innovative Bone Graft Substitute: A Comparative Biomechanical Study on Cadaveric Pelvises.

Hip implant failure is mainly due to aseptic loosening of the cotyle and is typically accompanied by defects in the acetabular region. Revision surgery aims to repair such defects before implantation by means of reconstruction materials, whose morselized bone graft represents the gold standard. Due to the limited availability of bone tissue, synthetic substitutes are also used. The aim of this study was to evaluate if a synthetic fully resorbable tri-calcium phosphate-based substitute can provide adequate mechanical stability when employed to restore severe, contained defects, in comparison with morselized bone graft. Five cadaveric pelvises were adopted, one side was reconstructed with morselized bone graft and the other with the synthetic substitute, consisting of dense calcium phosphate granules within a collagen matrix. During the biomechanical test, cyclic load packages of increasing magnitude were applied to each specimen until failure. Bone/implant motions were measured through Digital Image Correlation and were expressed in terms of permanent and inducible translations and rotations. The reconstruction types exhibited a similar behavior, consisting of an initial settling trend followed by failure as bone fracture (i.e., no failure of the reconstruction material). When 2.2 Body Weight was applied, the permanent translations were not significantly different between the two reconstructions (p = 0.06–1.0) and were below 1.0 mm. Similarly, the inducible translations did not differ significantly (p = 0.06–1.0) and were below 0.160 mm. Rotations presented the same order of magnitude but were qualitatively different. Overall, the synthetic substitute provided adequate mechanical stability in comparison with morselized bone graft, thus representing a reliable alternative to treat severe, contained acetabular defects.

Comparison of Two Bone Grafting Techniques Applied During Posterior C1-C2 Screw-Rod Fixation and Fusion for Treating Reducible Atlantoaxial Dislocation

Several bone grafting techniques for posterior atlantoaxial arthrodesis have been reported. The techniques of placing a cancellous morselized bone graft (MBG) on decorticated surfaces of the atlantoaxial complex and securing a structural iliac bone graft (SBG) between C1 and C2 have been used widely. The aim of the present study was to compare the outcomes of these 2 bone grafting techniques for atlantoaxial arthrodesis. The data from 64 patients with reducible atlantoaxial dislocation treated using posterior C1-C2 screw-rod fixation and fusion were retrospectively reviewed. The MBG technique had been used in 32 patients and the SBG technique in 32 patients. The time required for bone fusion was recorded. The outcomes were evaluated using the Japanese Orthopaedic Association scale score, Neck Disability Index, visual analog scale (VAS) score for neck pain, patient satisfaction, and neck stiffness and compared between the 2 groups. The donor site complications were also compared, and donor site pain was assessed using a VAS. At the final follow-up, the bone fusion rate was 100% in both groups. No significant differences were found in the bone fusion time or donor site pain between the 2 groups (P > 0.05). Postoperatively, The Japanese Orthopaedic Association scale scores, Neck Disability Index, and VAS score for neck pain had improved significantly within both groups (P < 0.05), with no statistically significant differences between the 2 groups (P > 0.05). Additionally, no differences were found between the 2 groups in patient satisfaction and neck stiffness postoperatively (P > 0.05). The MBG and SBG techniques were both effective for atlantoaxial arthrodesis, with the advantages of reducing the potential risk of catastrophic bleeding of the epidural venous plexus and C2 nerve root injury.

Patient-Specific 3-Dimensional Printing Titanium Implant Biomechanical Evaluation for Complex Distal Femoral Open Fracture Reconstruction with Segmental Large Bone Defect: A Nonlinear Finite Element Analysis

This study proposes a novel titanium 3D printing patient-specific implant: a lightweight structure with enough biomechanical strength for a distal femur fracture with segmental large defect using nonlinear finite element (FE) analysis. CT scanning images were processed to identify the size and shape of a large bone defect in the right distal femur of a young patient. A novel titanium implant was designed with a proximal cylinder tube for increasing mechanical stability, proximal/distal shells for increasing bone ingrowth contact areas, and lattice mesh at the outer surface to provide space for morselized cancellous bone grafting. The implant was fixed by transverse screws at the proximal/distal host bone. A pre-contoured locking plate was applied at the lateral site to secure the whole construct. A FE model with nonlinear contact element implant-bone interfaces was constructed to perform simulations for three clinical stages under single leg standing load conditions. The three stages were the initial postoperative period, fracture healing, and post fracture healing and locking plate removal. The results showed that the maximum implant von Mises stress reached 1318 MPa at the sharp angles of the outer mesh structure, exceeding the titanium destruction value (1000 MPa) and requiring round mesh angles to decrease the stress in the initial postoperative period. Bone stress values were found decreasing all the way from the postoperative period to fracture healing and locking plate removal. The overall construct deformation value reached 4.8 mm in the postoperative period, 2.5 mm with fracture healing assisted by the locking plate, and 2.1 mm after locking plate removal. The strain value at the proximal/distal implant-bone interfaces were valuable in inducing bone grafting in the initial postoperative period. The proposed patient-specific 3D printed implant is biomechanically stable for treating distal femoral fractures with large defect. It provides excellent lightweight structure, proximal/distal bone ingrowth contact areas, and implant rounded outer lattice mesh for morselized cancellous bone grafting.

A comparative study of clinical and radiological outcome between cages and morselized bone graft in transforaminal lumbar interbody fusion surgery: a hospital-based study

&lt;p class="abstract"&gt;&lt;strong&gt;Background:&lt;/strong&gt; Degenerative spinal diseases resulting in neuropathic backache are managed by nerve root decompression with instrumented interbody fusion is the treatment of choice for these groups of patients when not managed conservatively.&lt;/p&gt;&lt;p class="abstract"&gt;&lt;strong&gt;Methods:&lt;/strong&gt; Hospital based, comparative, retrospective study was carried out in such patients who underwent transforaminal lumbar interbody fusion (TLIF) with either cage with bone graft or stand-alone autologous morselized bone graft. The clinical and radiological outcomes were compared in these two methods of interbody fusion to assess any significant difference between them. A total of 20 patients with lumbar canal stenosis and degenerative grade 1/2 spondylolisthesis who failed conservative management were operated by TLIF approach and were evaluated for post-operative improvement in Oswestry disability index (ODI) and interbody fusion on imaging at 6 months and 1 year postoperatively. Vertebral level of surgical intervention, intra-operative blood loss and duration of surgery were recorded for each patient along with complications, if any.&lt;strong&gt;&lt;/strong&gt;&lt;/p&gt;&lt;p class="abstract"&gt;&lt;strong&gt;Results:&lt;/strong&gt; In our study there was no significant difference in the clinical and radiological outcome between the two methods of interbody fusion. Although the group which was offered morselized bone graft with cage showed slightly better clinical outcome at 6 months of follow up, both showed no significant difference in ODI at 1 year of follow up.&lt;/p&gt;&lt;p class="abstract"&gt;&lt;strong&gt;Conclusions:&lt;/strong&gt; With this study, we can conclude that both the methods have similar clinical and radiological outcome with similar patient satisfaction and can be interchangeably employed for interbody fusion according to surgeon’s and patient’s preferences.&lt;/p&gt;

Mid-term and long-term results of restoring rotation center in revision hip arthroplasty

BackgroundTo restore rotation center exactly in revision hip arthroplasty is technically challenging, especially in Paprosky type III. The technical difficulty is attributable to the complicated acetabular bone defect. In this study, we discussed the method of restoring rotation center in revision hip arthroplasty and reported the clinical and radiological outcome of mid-term and long-term follow-up.MethodsThis study retrospectively reviewed 45 patients (48 hips) who underwent revision hip arthroplasty, in which 35 cases (35 hips) were available for complete follow-up data. During the operation, the acetabular bone defect was reconstructed by impaction morselized bone graft, and the hip rotation center was restored by using remnant Harris fossa and acetabular notches as the marks. The clinical outcome was assessed using the Harris hip score. Pelvis plain x-ray was used to assess implant migration, stability of implants, and incorporation of the bone graft to host bone.ResultThe average follow-up duration was 97.60 months (range 72–168 months). The average Harris hip score improved from 29.54 ± 10.87 preoperatively to 83.77 ± 5.78 at the last follow-up. The vertical distance of hip rotation center measured on pelvis x-ray was restored to normal, with the mean distance (15.24 ± 1.31) mm (range 12.4~17.3 mm). The mean loss of vertical distance of hip rotation center was (2.21 ± 0.72) mm (range 1.1 ~ 5.3 mm) at the last follow-up.ConclusionSatisfactory clinical and radiological outcome can be obtained through restoring hip rotation center by using remnant Harris fossa and acetabular notches as the anatomical marks in revision hip arthroplasty.

Vancomycin and its crystalline degradation products released from bone grafts and different types of bone cement.

Vancomycin is often used in orthopedic surgery as a local prophylaxis of bacterial infection. The aim of this work was to compare the release of vancomycin and its biologically inactive crystalline degradation products (CDP-1) during in vitro experiments from different types of local antibiotic delivery systems (bone grafts and bone cements). The concentrations of vancomycin and its crystalline degradation products were determined by high-performance liquid chromatography. Each experiment was performed in a phosphate buffer solution over 21 days. Morselized bone grafts, synthetic bone cements Palacos and Copal, and synthetic bone grafts were tested as local carriers of vancomycin. The highest concentration approximately 670 mg/L of vancomycin was released from synthetic bone grafts Actifuse. Even after 21 days, the concentration of vancomycin was still above the minimum inhibitory concentration (MIC). The maximum concentration of vancomycin released in two experiments with human bone grafts exceeded 600 mg/L during the first day and was still above MIC level 21 days later when the experiment was concluded. By comparing the synthetic bone cements Palacos and Copal, Copal had the average maximum concentration of only 32.4 mg/L and Palacos 35.7 mg/L. The concentration of vancomycin fell below the MIC for vancomycin-resistant Staphylococcus aureus (VRSA) on the seventh day with Palacos and the ninth day with Copal. This study showed the insufficient concentration of released vancomycin from synthetic bone cements at the end of the experiment. For improvement of local prophylaxis, it would be beneficial to increase the amount of vancomycin in bone cements.

Acetabular reconstruction for primary and revision total hip arthroplasty using Kerboull-type acetabular reinforcement devices-case-control study with factors related to poor outcomes of surgery.

Kerboull-type acetabular support rings (KT) and allogenic bone graft were used for severe periacetabular bone loss with primary and revision total hip arthroplasty (THA). The purpose of this case–control study is to evaluate the risk factors related to poor outcomes of surgery.Sixty patients underwent primary THA and revision THA using allogenic bone graft with KT for large acetabular deficiency. These patients were retrospectively evaluated postoperatively and followed-up by radiograph. The minimum follow-up period was 4 years and averaged 7 years. A radiological failure was defined by the following criteria:1)substantial migration defined as change in the angle of inclination of more than 5 degrees or migration of more than 5 mm,2)breakage of the screw or device,3)acetabular revision due to aseptic loosening.Expected risk factors were defined as female, age >75 years, body mass index (BMI) >25%, medical history of hypertension, renal failure, liver steatosis, diabetes, hyperlipidemia, cardiac infarction, smoking, American Academy of Orthopedic Surgery (AAOS) classification III or IV, bleeding>500 mL, time of surgery >3hours, high hip center-type KT, inclination of KT >45 degrees, screw angle >25 degrees, morselized bone graft, Kawanabe's classification stage 3 or 4 and revision surgery. Nineteen hips (31.6%) revealed radiological failure according to our criteria, and revision THA was performed in 2 hips (3.3%). In the statistical analysis, morselized bone graft and high hip center-type KT were identified as factors of poor outcomes of surgery.

Clinical Outcomes of Primary Total Knee Arthroplasty with Autogenous Morselized Bone Graft for a Large Medial Tibial Defect

Clinical Outcomes of Primary Total Knee Arthroplasty with Autogenous Morselized Bone Graft for a Large Medial Tibial Defect

Factors Associated With Spinopelvic Fixation Mechanical Failure After Total Sacrectomy.

We retrospectively analyzed factors associated with spinopelvic mechanical failure after total sacrectomy. To find the rate and type of mechanical fixation failure after total sacrectomy and to identify the associated risk factors. Although rigid fixation has been achieved, mechanical failure is sometimes encountered in reconstruction after total sacrectomy. The incidence and factors associated with spinopelvic fixation mechanical failure after total sacrectomy are still not clear. The study comprised 63 patients who underwent spinopelvic reconstruction after total sacrectomy. The potential risk factors for fixation mechanical failure after total sacrectomy were evaluated, which included age, sex, body mass index, type of tumor (benign or malignant), and adjuvant treatment received (e.g., chemotherapy, radiation therapy). The surgery-related factors included the classification of tumor resection (en bloc or piecemeal resection) and the type of iliosacral resection. Adoption of anterior spinal column fixation (ASCF), posterior pelvic ring fixation (PPRF), four-rod technique (FRT) of spinopelvic fixation (SPF), and structural or morselized bone grafting after total sacrectomy in patients were considered reconstruction-related factors. Cox regression models were used to analyze associations between postoperative fixation failure and risk factors for all models. Postoperative fixation mechanical failure occurred in 25% of patients (16/63) who underwent total sacrectomy. Univariate analysis showed that the factors associated with spinopelvic fixation mechanical failure after total sacrectomy were the non-adoption of FRT of SPF and ASCF, the adoption of Type II sacroiliac resection, and female sex, whereas multivariate analysis demonstrated similar results, except for the adoption of Type II sacroilliac resection. FRT connection of SPF and ASCF should be adopted in reconstruction after total sacrectomy, especially in female patients. 3.

BONE GRAFTING ENHANCED BY PLATELET-RICH PLASMA IN TREATMENT OF AVASCULAR NECROSIS OF FEMORAL HEAD

Treatment of avascular necrosis of the femoral head is an issue of current interest while it affects young and employable people. So far there is no well-defined strategy of management which would help to postpone hip arthroplasty and further revision procedure. Hip sparing surgical treatment of avascular necrosis of the femoral head by bone grafting prior to head collapse proved to be a viable option not only during early stages of disease but also at advanced stages. Platelet-rich plasma (PRP) addition to treatment plan potentially helps improving bone regeneration in situ.In this article the authors present a case of a 37 years old patient with avascular necrosis of the femoral head at a fragmentation stage (type 4B by ARCO). The authors centrifuged 15 ml of autologous whole blood (1500 RPM) obtained by a special double-contoured syringe. During the surgical stage of treatment PRP and morselized bone graft were mixed to introduce and impact into the debrided zone of avascular necrosis. The authors also introduced 0.3–0.4 ml of PRP into the debrided zone of avascular necrosis after bone grafting. At 6 months follow-up CT images of the studied patient demonstrated signs of bone reorganization and no loss of femoral head sphericity. Preoperative Visual Analogue Scale (VAS), Harris Hip Score (HHS) and Hip disability and Osteoarthritis Outcome Score (HOOS) prior to treatment were 60, 45 and 33 points respectively. Postoperative VAS, HHS and HOOS scores were 10, 78 and 78 respectively. In the authors’ opinion, impaction bone grafting enhanced by PRP helps obtaining good and excellent outcomes not only at early but also at advanced stages of avascular necrosis.

The effect of preparatory technique on the compressive properties of morsellised bone graft.

none.

One stage revision single-bundle anterior cruciate ligament reconstruction with impacted morselized bone graft following a failed double-bundle reconstruction.

Although double-bundle anterior cruciate ligament (ACL) reconstruction has theoretical benefits such as more accurate reproduction of ACL anatomy, it is technically more demanding surgery. This report describes the case of a one stage revision single-bundle ACL reconstruction after primary double-bundle ACL reconstruction. A professional dancer had an ACL previously reconstructed with a double-bundle technique, but the femoral tunnels were malpositioned resulting in residual laxity and rotational instability. The previous femoral tunnel positions were vertical and widened. The previous vertical tunnels were filled with impacted bone graft and a revision single-bundle ACL reconstruction was performed via the new femoral tunnel with a 2 O’clock position between the previous two tunnels. After 10 months of postoperative rehabilitation, the patient returned to professional dancing with sound bony union and without any residual instability.