Morphology Of Nanocomposites Research Articles

Ecofriendly magnetic nanocomposite (Fe3O4/SiO2/Ag) fabrication for sustainable dye wastewater management: catalysis and SERS for a cleaner approach.

Our study focuses on sustainable dye wastewater management through catalysis, scrutinized by surface-enhanced Raman spectroscopy (SERS) using an ecofriendly magnetic nanocomposite (Fe3O4/SiO2/Ag (FSA)). To our knowledge, the use of green synthesis for fabricating nanocomposites from a single source, namely Nerium oleander leaves, has not been extensively explored. This poses a distinctive and challenging approach, differentiating it from conventional chemical methods. Analytical investigations confirm the nanocomposite morphology, featuring Fe3O4 cubic cores with SiO2 spheres and silver nanoparticles (AgNPs) decoration. Efficient catalysis rapidly degrades unary and binary dye systems (MB, RhB, and MB + RhB), with high efficiency in short durations (MB: 96% in 10min, RhB: 94% in 2min, MB + RhB: 96% MB and 91% RhB in 9min) and with elevated "k" values. SERS monitors water quality, revealing complete degradation and quenching of dye fingerprints with fabricated nanocomposite FSA. The nanocomposite exhibits reusability over four cycles by easy recovery of catalyst with external magnet. The nanocomposite achieved 89.7% degradation efficiency in real-time household wastewater treatment. The proposed research aligns with UN SDGs 6 and 15 and this approach holds promise for advancing industrial waste management.

Tuning the structural, morphological, optical, dielectric, and magnetic properties of PVA via embedding with CoFe2O4:CuO nanoparticles

Polyvinyl alcohol (PVA) embedded CoFe2O4: CuO (CC) nanocomposites (NC) were prepared by casting technique. The prepared CoFe2O4 (CFO) sample have crystallite size in the range of 20.10-29.08 nm, whereas the crystallite sizes of CuO were found in the range of 20.29-23.68 nm, respectively. TEM images revealed the spherical shape morphology of CC nanocomposite with an average particle size distribution of 15 nm. The Urbach energy of the PCC films increased from 0.44 to 2.590 eV, whereas the direct optical band gaps decreased from 5.584 to 4.345 eV, respectively. The refractive indices of the PCC films were found to be in the range of 1.9 -2.6, depending on the different models. Room Temperature-dependent saturation magnetization and coercive field for the prepared nanocomposites were found to be 0.52-1.296 (emu/g) and 1210-1340 (Oe), respectively. The uniaxial magnetic anisotropic constant of PCC films was remarkably enhanced from 0.654x103 to 3.826x103 (erg/cm3) for PCC2, PCC3, and PCC4, correspondingly. The enhanced values of dielectric and magnetic parameters of the prepared nanocomposites suggest their suitability for magnetic recording and memory systems.

Novel synthesis of CuHCF/B-rGO composites for oxygen evolution reaction activity

In this work, we have focused on the preparation of copper hexacyanoferrate/boron doped rGO composites (abbreviated as CuHCF/B-rGO) by employing simple co-precipitation technique subsequently processed with ultrasonication method. The XRD spectra confirmed the existence of the cubic structure of copper hexacyanoferrate with high crystalline peaks. The prepared nanocomposite morphology was evaluated by scanning electron microscopy (SEM), and confirmed CuHCF nanoparticles formation with flake-like and wrinkled sheets. Pure CuHCF nanostructures revealed good OER action at 430 mV to obtain 10 mA/cm2. The obtained CuHCF product OER activity can be further upgraded by incorporating the electrically conductive boron doped reduced graphene oxide matrix into CuHCF nanostructures, for the reason that the overpotential of the CuHCF/B-rGO was reduced to 380 mV to attain 10 mA/cm2 with 88 mV/dec Tafel slope value. The doping of heteroatom considerably improves charge-transfer resistance of metal hexacyanoferrate, giving a small resistance value of 2.97 Ω, which was lower than that of CuHCF (5.57 Ω) and CuHCF/rGO (4.31 Ω). Furthermore, the catalytic activity of the CuHCF/B-rGO was stable at prolonged hours with a small decay of 12.5%. Therefore, this work offers new approach to stimulate the catalytic performance of metal hexcyanoferrate by highly conductive carbon-based materials for water splitting performance.

Tuning the Fe-Gd nanoparticles co-functionalized mesoporous carbon from sphere to nanobowl for advanced bioapplications

Studies on the function-integrated nanocomposites with well-tuned morphologies have received considerable interest. Here, we reported the preparation of mesoporous carbon nanobowl integrated with stoichiometric γ-Fe2O3 and GdPO4 nanoparticles (Fe-Gd/MCN-B) for morphological advantage exploration. Followed by (i) emulsion-induced interface anisotropic assembly of polydopamine, (ii) solvent evaporation-induced sorption of Wells-Dawson-like heterometallic cluster of {Fe6Gd6P6} and (iii) temperature-programmed carbonization, Fe-Gd/MCN-B with the size around 200 nm was isolated. Our in-vitro studies revealed that Fe-Gd/MCN-B showed a 63.0 % amplified photoacoustic (PA) signal intensity as compared with its nanospherical analogue of Fe-Gd/MCN-S owing to the enhanced light harvesting and photothermal conversion on the interface of its nanobowl morphology. Furthermore, the combined magnetic resonance (MR) imagining, drug delivery and photothermal treatment efficacy in Fe-Gd/MCN-B were also validated in-vitro. These results demonstrated that the delicate design of the morphology of function-integrated nanocomposites is an available way for enhanced imaging performance.

Enhanced photocatalytic removal of methyl orange dye employing SiO2/Mn2O3 based nanocatalyst under visible light

Surface water contamination by dye pollutants is a global environmental concern. The treatment of effluent from textile waste using metal oxide-based photocatalysts is a widely employed approach owing to its efficacy and simplicity. Herein, the synthesis and fabrication of novel visible radiation receptive manganese oxide and mesoporous silica nanocomposites (Mn2O3/SiO2) is described. Surface morphology of nanocomposites using scanning electron microscopy (SEM) displayed spherical shaped agglomerated structure. The chemical composition of nanocomposites was examined by using energy dispersive x-ray (EDX) analysis respectively indicating the presence of respective elements. Structural analysis was carried out by using XRD spectroscopy, while optical properties were evaluated by employing UV–visible spectroscopy. The photocatalytic activity of pure Mn2O3 and SiO2 nanoparticles as well as their nanocomposites with two different ratios Mn2O3/SiO2 (1:3) and Mn2O3/SiO2 (3:1) were evaluated by using methyl orange (MO) as a model dye. The band gap energy of Mn2O3/SiO2 (1:3) and Mn2O3/SiO2 (3:1) nanocomposite was 2.39 eV and 1.69 eV respectively. The nanocomposites exhibited improved photocatalytic efficiency as compared to pure nanoparticles as a function of pH and mixing ratio. For instance, at pH 7.0, Mn2O3/SiO2 (1:3) nanocomposite has depicted maximum degradation efficiency of 68 % for degradation of MO as compared to Mn3O4/SiO2 (3:1) nanocomposite, Mn3O4 and SiO2 nanoparticles. However, at pH 2.0 Mn2O3/SiO2 (3:1) nanocomposite had shown maximum degradation efficiency of 99 % as compared to Mn2O3/SiO2 (1:3), Mn2O3 and SiO2 nanoparticles. The degradation reaction followed pseudo first order kinetics. At pH 7.0, the rate constant values of nanocomposites i.e. Mn2O3/SiO2(1:3) and Mn2O3/SiO2(3:1) comes out to be 4.68 × 10−3 min−1 and 2.49 × 10−3 min−1 respectively. At pH 2.0, the rate constant values calculated for Mn2O3/SiO2(1:3) nanocomposite and Mn2O3/SiO2(3:1) nanocomposite was 4.91 × 10−3 min−1 and 1.24 × 10−2 min−1 respectively. The easy fabrication of these nanocomposites coupled with facile tuning of their properties make them suitable contenders for efficient dye degradation in wastewater treatment.

Aloebarbadensis - Assisted MgBiO/MgCuBiO/MgBaBiO nanocomposites as effective gamma shielding novel materials

For the first of its kind, MgO/Bi2O3 (1:1) (MBO), MgO/CuO/Bi2O3 (1:1:1) (MCBO) and MgO/BaO/Bi2O3 (1:1:1) (MBBO) binary/ternary nanocomposites (NCs) were synthesized by Aloe barbadensis (Aloe vera) mediated solution combustion method. The as-formed NCs are subjected to calcination for 3 h at 600oC.The Mg-based NCs acquired are subjected to various analytical characterization methodologies, including PXRD (Powder X-ray Diffraction), SEM (Scanning Electron Microscopy), EDS (Energy Dispersive X-ray Spectroscopy), FTIR (Fourier Transform Infrared Spectroscopy), and Ultraviolet–Visible Spectroscopy (UV–Vis). The Bragg reflections confirm the formation of monoclinic phase BaO, Bi2O3, cubic MgO and tetragonal CuO nanoparticles. The surface morphology of MBO, MCBO and MBBO NCs consists of irregular sized, leafy and burrow like structured agglomerated NPs with hollows and voids/pores. The Eg (direct energy band gap) determined from W-H (Wood and Tauc's) plot was found to be 3.09, 3.19 and 3.12 eV for MBO, MCBO and MBBO NCs respectively. The evaluation of gamma radiation shielding properties was conducted using a NaI (Tl) detector connected to a multi-channel analyzer. Shielding parameters of MBO, MCBO and MBBO, such as μ/ρ (mass attenuation coefficient), λ (mean free path), HVL (half-value layer), TVL (tenth-value layer) are measured. Among the as-synthesized Mg-based NCs, MBO exhibits better shielding properties compared to MCBO and MBBO. Thus, the procured Mg-based NCs are suitable for applications where weight reduction is critical, such as aerospace or portable radiation shielding systems.

Structural and morphological studies of non-covalent functionalization carbon nanotubes wrapped poly(3-hexylthiophene-2,5-diyl) nanocomposites

In this study, a simple and efficient non-covalent functionalization method was developed to introduce conducting polymer of P3HT onto pristine MWCNT and hydroxyl MWCNT surfaces without causing significant changes in electrical characteristics, especially if used as a sensing material. Electron microscopy (FE-SEM) and (HR-TEM) were used to examine the surface morphology of nanocomposites, which demonstrated that the MWCNTs were well wrapped by P3HT. EDX analysis showed interactions between MWCNT-OH and P3HT, with a higher sulfur content of 7.77 wt% from P3HT. Additionally, the diameters of both pristine MWCNT (24.46 nm) and MWCNT-OH (27.56 nm) increased significantly when they form nanocomposites (35.35 nm and 39.40 nm respectively). Further characterization of the produced P3HT-MWCNT nanocomposite was performed using FT-IR and Raman spectroscopy. It was discovered that MWCNTs were dispersed uniformly, with a substantial interaction between P3HT and MWCNTs. The introduction of malathion on the surface of the nanocomposites reveals interaction between P3HT and malathion via intermolecular hydrogen bonding of thiophene, as evidenced by inelastic neutron scattering (INS) spectroscopy, suggesting that the P3HT/MWCNT has the potential as a promising sensing material for organophosphate compounds detection.

Highly Specific Non-Enzymatic Electrochemical Sensor for the Detection of Uric Acid Using Carboxylated Multiwalled Carbon Nanotubes Intertwined with GdS-Gd2O3 Nanoplates in Human Urine and Serum.

Herein, the electrochemical sensing efficacy of carboxylic acid functionalized multiwalled carbon nanotubes (C-MWCNT) intertwined with coexisting phases of gadolinium monosulfide (GdS) and gadolinium oxide (Gd2O3) nanosheets is explored for the first time. The nanocomposite demonstrated splendid specificity for nonenzymatic electrochemical detection of uric acid (UA) in biological samples. It was synthesized using the coprecipitation method and thoroughly characterized. The presence of functional groups and disorder in the as-synthesized nanocomposite are confirmed using Fourier transform infrared spectroscopy and Raman spectroscopy. Furthermore, field emission scanning electron microscopy, high-resolution transmission electron microscope, X-ray powder diffraction, and X-ray photoelectron spectroscopy provides a clear understanding of the morphology, coexisting phases, and elemental composition of the as-synthesized nanocomposites. The differential pulse voltammetry technique was utilized to elaborate the electrochemical sensing of UA using a GdS-Gd2O3/C-MWCNT modified glassy carbon electrode (GCE), The sensor showed an enhanced current response by more than 2-fold compared to bare GCE. Also, the sensor's performance was further improved by dispersing the nanocomposite in an ionic liquid with the exceptional reproducibility (SD = 0.0025, n = 3). The fabricated UA sensor GdS-Gd2O3/C-MWCNT/IL/GCE demonstrated a wide linear detection range from 0.5-30 μM and 30-2000 μM, effectively covering the entire physiological range of UA in biological fluids with a limit of detection (LOD) of 0.380 μM (+3SD of blank) and a sensitivity of 356.125 μA mM-1 cm-2. Moreover, the electrodes exhibited storage stability for 2 weeks with decrease in zero-day current by only 4.5%. The sensor was validated by quantifying UA in 12 unprocessed clinical human urine and serum samples, and its comparison with the gold standard test yielded remarkable results (p < 0.05). Hence, the proposed nonenzymatic electrochemical UA sensor is selective, sensitive, reproducible, and stable, making it reliable for point-of-care diagnostics.

Chitosan/CNDs coated Cu electrode surface has an electrical potential for electrical energy application

Polymers and nanomaterials had been widely applied at electrochemical chemosensor and biosensor. Developing technical energy is still much needed, especially using natural environmental friendly material. Both chitosan of biopolymer and carbon nanodots (CNDs) of nanomaterials are highly studied due to their extraordinary properties. The research focus on chitosan and chitosan/CNDs nanocomposite surface that was applied for electrical energy. Nanocomposite was coated on Cu electrode surface by using electroplating method. The coated electrode was dipped into oil samples. The dipped nanocomposite then was characterized by FTIR, XRD, SEM, and Chemosensor. Nanocomposite structure is still maintain its chemical compound, confirmed by FTIR and XRD, which still maintain amine group; hydroxyl group; and crystalinity of chitosan after CNDs intercoporation. Nanocomposite surface morphology show magnetite particle distribution that spreaded on the surface of electrode for both chitosan and CNDs nanocomposite, which is confirmed by SEM. The free dipping method is based on the sensitive material chitosan/CNDs as a chemosensor; the pressure process on the surface of the chitosan/CNDs sensitive material causes the interaction of metal ions and acid compounds, which involves an iontophoresis process where oil atoms that have been excited in the evaporation process will experience atomic vibrations due to electron transport which then the active groups on the Chemosensor directly absorb and bind metals and acids in oil use a chemisorption process which leads to the transfer of charge from the adsorption particles to the chemosensor surface to fill the holes so that a potential difference occurs in the form of electrical pulses which will then be captured by the Arduino system which will be converted into digital data. This process makes technological energy production in the form of electrical energy faster.

Effects of graphene reinforcement on morphology, thermophysical, and mechanical properties of polyvinyl alcohol and polyacrylamide in condensed phases

The subtle interplay of noncovalent interaction in enhancing the compatibility between the graphene-based material and the oligomers of polyvinyl alcohol (PVA) and polyacrylamide (PAM) in the solvent phase is unraveled within the framework of all-atom classical force field-based molecular dynamics (MD) simulations. The decomposition of binding free energy analysis demonstrates that the interaction between polymer segments and graphene (G)-surface crucially emanates from the van der Waals (vdW) interactions, while the adsorption of polymer chains on the graphene oxide (GO)-surface is influenced by vdW and electrostatic interactions. The influence of diverse factors including the strain rate, the size of the nanofiller, the number of oligomers, and the thermal quenching rate on controlling the morphology, mechanical, and thermophysical properties of the graphene-reinforced polymer nanocomposites are further explored. The uniaxial deformation simulations of the graphene-reinforced PVA and PAM matrices show that the interfacial mechanical strength is escalated for the G-PVA nanocomposite. The inclusion of graphene nanofiller reduces the polymer chain mobility and increases the intermolecular interaction, which in turn enhances the toughness of the graphene-polymer composites. Increasing the strain rate raises the yield strength and modulus, making the composites appear stronger and stiffer. As evidenced by the predicted glass transition temperature, the thermal stability of the PVA and PAM matrices is significantly improved by the graphene reinforcement.

Enhanced photocatalytic degradation of Reactive Green 19 dye using earthworms like T-ZnO-CuO nano-composite material as a S-scheme heterojunction photocatalyst

Due to increasing organic dye pollution in the water environment, green and efficient photocatalyst are urgently needed to solve this problem. This study hypothesizes that green-synthesized nanocomposites, using plant leaf extracts, will significantly enhance the efficiency of organic dye degradation without the environmental drawbacks associated with traditional methods. Herein, enhanced degradation of Reactive Green 19 (RG 19) dye using earthworm like T-ZnO-CuO (TZC) nano-composite was reported. T-ZnO (TZ) and TZC nano-composite were synthesized using leaves extract of Thevetia peruviana plant. In the synthesis process, Thevetia peruviana leaves extract acts as a capping, stabilising and reducing agent, and additionally create a unique surface morphology of TZC nano-composite. The establishment of TZ and TZC nano-composite samples were investigated using FT-IR, XRD, FE-SEM with EDX, HR-TEM and UV–VIS DRS spectroscopy. Furthermore, band gap energy of TZ and TZC nano-composites were calculated using Tauc’s plot. The band gap energy of TZC2 nano-composite was determined to be 2.80 eV. The nano-composite photocatalyst (TZC) was utilised in the degradation of RG 19 dye with 96.89 % efficiency in 150 min at 20 mg/L dye concentration, pH=7.5, and 0.6 g/L catalyst dose. In order to investigate the tentative photocatalytic mechanism, scavenging study, recyclability experiment, and stability were also investigated. The findings show that O2− and OH radical species have higher degree of involvement in the degradation process. The kinetics of the degradation of RG 19 dye follows pseudo-first-order kinetics.

Effective move of Polypyrrole/TiO2 hybrid nanocomposites on removal of methylene blue dye by photocatalytic activity

Polypyrrole (PPy) was synthesized effectively by chemical oxidative polymerization of pyrrole. Organic-inorganic hybrid materials PPy-TiO2 with different PPy weight percents were prepared by mechanical mixing, by using titanium oxide nanoparticles. The characterizations of PPy-TiO2 hybrid nanocomposites were analyzed by FTIR, UV–Vis, XRD, TGA & DSC and SEM & EDAX. Fourier transform infrared (FTIR) spectra and X-ray diffraction (XRD) were used to distinguish the structure of the attained PPy-TiO2 hybrid nanocomposites. UV–vis techniques are proved the polymerization of pyrrole monomer and the strong interaction between PPy and TiO2 nanoparticles. Thermogravimetric analyzer (TGA-DSC) curves revealed that TiO2 can decrease the weight loss of nanocomposite and increase the thermal stability of synthesized nanocomposites. The residual mass of the pure Pyy-36.51 %, PPy-TiO2 (25 %)-64.82 %, PPy-TiO2 (50 %)-60.82 %, PPy-TiO2 (75 %)-70.50 % and pure TiO2- 96.69 % nanocomposites at the residual temperature 497.80 °C. The morphology and molecular structure of the hybrid nanocomposite were characterized by scanning electron microscope & Energy dispersive X-ray analysis spectroscopy (SEM & EDAX). These characterization results confirmed the polymerization of pyrrole and the strong interaction between PPy and TiO2. The material with outstanding absorption capability that meet in optical application is the challenging way, thus the photocatalytic analysis of PPy-TiO2 hybrid nanocomposites is merely a admissible results. It is notably the favorable degradation efficiency of pure PPy, the PPy+TiO2 (25 % 50 % & 75 %) nanocomposites are 82 %, 66 %, 67 % and 53 % respectively.

Structural, optical and dielectric properties of (AZT) aluminum doped zinc titanate nano-composites

Aluminum-doped Zinc Titanate (AZT) AlxZn1-xTiO3 ( for x= 0.20,0.40,0.60,0.80) nanoparticles are synthesized through low temperature hydrothermal method and their physical properties such as structure, surface, energy gap and dielectric characteristics were investigated using X-ray diffraction (XRD), Field Emission Scanning Electron Microscopy (FESEM), Transmission Electron Microscopy (TEM), UV-visible spectroscopy and impedance analysis. XRD analysis indicated structural transformation of tetragonal phase for samples of x = 0.20 to 0.60 and some secondary phases for x=0.80. It was found that lattice constants of the sample decrease with increasing aluminium content. The morphology of nano-composites, as evidenced by FESEM and TEM imaging, displayed the formation of nano-spheres and nano-rods. The impedance and dielectric modulus analysis for the current samples revealed their dielectric behaviour, microstructure and conduction procedure. However negative dielectric property was seen in nano-composite with x=0.60. All samples with x ranging between 0.2 to 0.8 displayed high ac-electrical conductivity at 1 MHz frequency. These samples are well suitable for charge storage capacitors and as perfect absorbers.

Highly operative removal of amoxicillin (AMX) from aqueous solution by MnFe2O4 nanoparticles and carboxy methyl cellulose (CMC) composite

In recent work, manganese ferrite (MnFe2O4) nanoparticles and manganese ferrite carboxy methyl cellulose (MnFe2O4/CMC) composite were synthesized using Salvadora persica extract (SPE). Characterization of green synthesized nanoparticles and composite was performed by different techniques such as FTIR, SEM, UV–visible spectroscopy, XRD, and EDX. These techniques evaluated the size, shape, composition, morphology, and crystallinity of bimetallic nanoparticles (BMNPs) and nano-composites (NCs). These techniques demonstrated the presence of oxygen with metals, 3.28 nm size of MnFe2O4 and CMC hump between the 22-26° and the spherical, cubic, and mostly irregular shape of MnFe2O4 nanoparticles and rougher surface of MnFe2O4/CMC composite. Nanoparticles and nanocomposites were utilized for the degradation of Amoxicillin (AMX). The maximum degradation of AMX occurred at optimum conditions such as adsorbent dosage (6 mg MnFe2O4, 2 mg MnFe2O4/CMC), pH (4,6) within 60 min at 5 mg/L initial AMX concentration. Results revealed that the catalytic activity of NCs (97 %) was more than BMNPs (93 %) which may be attributed to the incorporation of reduced Carboxy Methyl Cellulose (CMC). It reduced the e-hole recombination rate and enhanced the AMX degradation at ambient conditions. The nature of adsorption was illustrated by Langmuir and Freundlich models and results demonstrated that the Freundlich model followed more closely. Thermodynamics parameters described the endothermic and spontaneous nature of the adsorption process, negative Gibbs energy variation, and positive entropy and enthalpy change. The recovery and reusability of BMNPs and NCs were investigated and concluded that MnFe2O4 and NCs can be used many times for the AMX adsorption process.

Study on Synergistic Flame-Retardancy of Surface Modified Zinc Stannate and Ammonium Polyphosphate on Polypropylene Nanocomposites

The effect of zinc stannate and synergy between zinc stannate with ammonium polyphosphate in polypropylene matrix is studied. The zinc stannate nanoparticles were synthesized by surfactant assisted low temperature precipitation method, and further surface modified with tetraethyl-orthosilicate at room temperature. Zinc stannate (ZS) and ammonium polyphosphate (APP) were incorporated in polypropylene matrix (1, 5 and 10 % by wt.). PP nanocomposites were analysed for flexural strength, tensile strength, linear burning rate, smoke density and LOI test. Morphology of nano particles and composites were analysed by FESEM. Mechanical analysis of PP nanocomposites demonstrates that, the modified ZS-TEOS performed better than unmodified ZS. Smoke density profiles suggest that the APP could slightly generate more smoke in PP with ZS and ZS-TEOS. Linear burning rate test results indicates that the APP with ZS and ZS-TEOS provide stability to PP for resisting flame spread.

Advanced ternary carbon-based hybrid nanocomposites for electromagnetic functional behavior in additive manufacturing

This study explores the processing and performance of acrylonitrile butadiene styrene (ABS)-based carbon ternary hybrid nanocomposites, incorporating carbon nanotubes (CNT), graphene nanoplatelets (GNP), and carbon black (CB), for applications in electromagnetic compatibility (EMC). The effect of nanocomposite processing on electromagnetic properties was evaluated by varying the mixing protocol, either through direct extrusion with simultaneous addition of all constituents or by preparing a master batch followed by dilution. The impact of nanofiller morphology and processing techniques on the behavior of nanocomposites was systematically investigated. Filaments of these nanocomposites were Additive Manufactured via Material Extrusion, and the resulting parts were evaluated for EMI shielding effectiveness (SE) in the X-band frequency range. The study reveals that the morphology, influenced by the processing strategy, significantly impacts the EMI SE properties of the printed samples. Particularly, ternary hybrids 3/3/3 wt% (CNT/GNP/CB) nanocomposites demonstrate promising electrical (0.003 S/cm), electromagnetic (29 dB of total attenuation), and mechanical performance (elastic modulus of 3080 MPa), with a clear advantage observed in those processed via direct extrusion. These nanocomposites were validated as feedstock filaments for 3D printing, and the printed sample exceeds the injection molded behavior for the composition 3/3/3 wt% (CNT/GNP/CB), achieving 40 dB of total attenuation at 11.8 GHz. The findings contribute valuable knowledge into tailoring nanocomposite formulations for additive manufacturing applications in EMI shielding, providing a nuanced understanding of the interplay between processing strategies, nanocomposite morphology, and resulting material properties.

Green synthesis of magnetite iron oxide nanoparticles using Azadirachta indica leaf extract loaded on reduced graphene oxide and degradation of methylene blue

In the current arena, new-generation functional nanomaterials are the key players for smart solutions and applications including environmental decontamination of pollutants. Among the plethora of new-generation nanomaterials, graphene-based nanomaterials and nanocomposites are in the driving seat surpassing their counterparts due to their unique physicochemical characteristics and superior surface chemistry. The purpose of the present research was to synthesize and characterize magnetite iron oxide/reduced graphene oxide nanocomposites (FeNPs/rGO) via a green approach and test its application in the degradation of methylene blue. The modified Hummer's protocol was adopted to synthesize graphene oxide (GO) through a chemical exfoliation approach using a graphitic route. Leaf extract of Azadirachta indica was used as a green reducing agent to reduce GO into reduced graphene oxide (rGO). Then, using the green deposition approach and Azadirachta indica leaf extract, a nanocomposite comprising magnetite iron oxides and reduced graphene oxide i.e., FeNPs/rGO was synthesized. During the synthesis of functionalized FeNPs/rGO, Azadirachta indica leaf extract acted as a reducing, capping, and stabilizing agent. The final synthesized materials were characterized and analyzed using an array of techniques such as scanning electron microscopy (SEM)-energy dispersive X-ray microanalysis (EDX), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction analysis, and UV–visible spectrophotometry. The UV–visible spectrum was used to evaluate the optical characteristics and band gap. Using the FT-IR spectrum, functional groupings were identified in the synthesized graphene-based nanomaterials and nanocomposites. The morphology and elemental analysis of nanomaterials and nanocomposites synthesized via the green deposition process were investigated using SEM–EDX. The GO, rGO, FeNPs, and FeNPs/rGO showed maximum absorption at 232, 265, 395, and 405 nm, respectively. FTIR spectrum showed different functional groups (OH, COOH, C=O), C–O–C) modifying material surfaces. Based on Debye Sherrer's equation, the mean calculated particle size of all synthesized materials was < 100 nm (GO = 60–80, rGO = 90–95, FeNPs = 70–90, Fe/GO = 40–60, and Fe/rGO = 80–85 nm). Graphene-based nanomaterials displayed rough surfaces with clustered and spherical shapes and EDX analysis confirmed the presence of both iron and oxygen in all the nanocomposites. The final nanocomposites produced via the synthetic process degraded approximately 74% of methylene blue. Based on the results, it is plausible to conclude that synthesized FeNPs/rGO nanocomposites can also be used as a potential photocatalyst degrader for other different dye pollutants due to their lower band gap.

Retrieval of Cu2+ and Cd2+ ions from aqueous solutions using sustainable guar gum/PVA/montmorillonite nanocomposite films: effect of temperature and adsorption isotherms.

Uncontrolled or improperly managed wastewater is considered toxic and dangerous to plants, animals, and people, as well as negatively impacting the ecosystem. In this research, the use of we aimed to prepare polymer nanocomposites (guar gum/polyvinyl alcohol, and nano-montmorillonite clay) for eliminating heavy metals from water-based systems, especially Cu2+ and Cd2+ ions. The synthesis of nanocomposites was done by the green method with different ratios of guar gum to PVA (50/50), (60/40), and (80/20) wt%, in addition to glycerol that acts as a cross-linker. Fourier-transform infrared spectroscopy (FT-IR) analysis of the prepared (guar gum/PVA/MMT) polymeric nano-composites' structure and morphology revealed the presence of both guar gum and PVA's functional groups in the polymeric network matrix. Transmission electron microscopy (TEM) analysis was also performed, which verified the creation of a nanocomposite. Furthermore, theromgravimetric analysis (TGA) demonstrated the biocomposites' excellent thermal properties. For those metal ions, the extreme uptake was found at pH 6.0 in each instance. The Equilibrium uptake capacities of the three prepared nanocomposites were achieved within 240min. The maximal capacities were found to be 95, 89 and 84mg/g for Cu2+, and for Cd2+ were found to be 100, 91, 87mg/g for guar gum (80/20, 60/40 and 50/50), respectively. The pseudo-2nd-order model with R2 > 0.98 was demonstrated to be followed by the adsorption reaction, according to the presented results. In less than 4hours, the adsorption equilibrium was reached. Furthermore, a 1% EDTA solution could be used to revitalize the metal-ion-loaded nanocomposites for several cycles. The most promising nanocomposite with efficiency above 90% for the removal of Cu2+ and Cd2+ ions from wastewater was found to have a guar (80/20) weight percentage, according to the results obtained.

Effect of polypyrrole incorporation amounts on the optical and electrical properties of PVA/CMC blended polymer for optoelectronic applications

In the present work, hybrid flexible blended polymers of polypyrrole (PPy)/polyvinyl alcohol (PVA)/carboxymethyl cellulose (CMC); PVA/CMC/x wt % PPy; were constructed as promising blended materials to be used in various optoelectronics applications. X-ray diffraction and scanning electron microscopy techniques were used to investigate the structure and the surface morphology of polymer nanocomposites. The doped blends have better absorption of the three types of ultraviolet (UVA, UVB, and UVC), as well as the visible spectrum. The transmittance values in the visible range dropped from 90 % to 63 % as the PPy concentration reached 0.5 wt%. At x = 0.5, the minimum direct and indirect optical band gap energy values of (4.82, 4.39, 4.23) eV and (3.76, 3.84, 3.62, 2.93) eV, respectively, were obtained. The incorporation of PPy into the PVA/CMC blend led to a regular rise in the refractive index value within the visible range. The blend doped with 0.5 wt % PPy exhibited the highest optical dielectric constant values within the visible range. The enhancement/reduction in the fluorescence intensity depended on the excitation wavelength and the amount of PPy doping in the blended polymers. The effect of voltage, temperature and the amount of PPy doping on the current behavior of the resulting electric current in all blends was explored. The ohmic and nonohmic natures and the charge transport mechanisms of different blends were determined.

Electrochemical properties of novel redox active electrode coatings based on heterocyclic polyazines and its nanocomposites with carbon nanomaterials

This work aims to study electrode materials based on unsubstituted polyazines and composites which will allow further advancing both in the molecular design of redox polymers, composites and materials and evaluating their potential applicability. The polymers were prepared by two-phase chemical oxidative polymerization. Polymer-carbon nanocomposites (NC) based on unsubstituted polyphenoxazine were prepared for the first time. The physicochemical and electrochemical properties were compared for NCs based on polyphenothiazine (PPTA), polyphenoxazine (PPOA) and carbon nanomaterials (CNM). The used CNMs comprise reduced graphene oxide (RGO), single-walled and multi-walled carbon nanotubes (SWCNT and MWCNT). The NC structure and morphology were studied by means of FT IR spectroscopy, XRD, FE-SEM and TEM. The limited solubility of some monomers prevents their electrochemical deposition on electrodes. Therefore, to study the electrochemical, spectroelectrochemical behavior and electrochemical impedance of novel redox active electrode coatings, suspensions of synthesized polymers or their NCs were applied onto electrodes and dried. The effect of NC composition on the conductivity and redox activity thereof was discovered. In general, composites have a higher conductivity than individual polymers. Despite differences in electrical conductivity, all samples exhibited electrocatalytic behavior demonstrated for example of Fe(II)/Fe(III) cyanide redox transition on a planar electrode in a K3[Fe(CN)6] solution in 1 M H2SO4. The electronic absorption spectra were recorded in-situ in an electrochemical cell by varying the working electrode potential and showed an electrochromic effect for PPTA and CNM/PPTA. The proposed common equivalent electric circuit allowed explaining the different electrochemical properties of polymers and CNM composites thereof.