Morphological Studies Research Articles

Morphological Study before and after Thermal Treatment of Polymer–Polymer Mixed–Matrix Membranes for Gas Separations

Morphological Study before and after Thermal Treatment of Polymer–Polymer Mixed–Matrix Membranes for Gas Separations

A G-quadruplex-binding platinum complex induces cancer mitochondrial dysfunction through dual-targeting mitochondrial and nuclear G4 enriched genome

BackgroundG-quadruplex DNA (G4) is a non-canonical structure forming in guanine-rich regions, which play a vital role in cancer biology and are now being acknowledged in both nuclear and mitochondrial (mt) genome. However, the impact of G4-based targeted therapy on both nuclear and mt genome, affecting mt function and its underlying mechanisms remain largely unexplored.MethodsThe mechanisms of action and therapeutic effects of a G4-binding platinum(II) complex, Pt-ttpy, on mitochondria were conducted through a comprehensive approaches with in vitro and in vivo models, including ICP-MS for platinum measurement, PCR-based genetic analysis, western blotting (WB), confocal microscope for mt morphology study, extracellular flux analyzer, JC1 and Annexin V apoptosis assay, flow cytometry and high content microscope screening with single-cell quantification of both ROS and mt specific ROS, as well as click-chemistry for IF study of mt translation. Decipher Pt-ttpy effects on nuclear-encoded mt related genes expression were undertaken via RNA-seq, Chip-seq and CUT-RUN assays.ResultsPt-ttpy, shows a highest accumulation in the mitochondria of A2780 cancer cells as compared with two other platinum(II) complexes with no/weak G4-binding properties, Pt-tpy and cisplatin. Pt-ttpy induces mtDNA deletion, copy reduction and transcription inhibition, hindering mt protein translation. Functional analysis reveals potent mt dysfunction without reactive oxygen species (ROS) induction. Mechanistic study provided first evidence that most of mt ribosome genes are highly enriched in G4 structures in their promoter regions, notably, Pt-ttpy impairs most nuclear-encoded mt ribosome genes’ transcription through dampening the recruiting of transcription initiation and elongation factors of NELFB and TAF1 to their promoter with G4-enriched sequences. In vivo studies show Pt-ttpy’s efficient anti-tumor effects, disrupting mt genome function with fewer side effects than cisplatin.ConclusionThis study underscores Pt-ttpy as a G4-binding platinum(II) complex, effectively targeting cancer mitochondria through dual action on mt and nuclear G4-enriched genomes without inducing ROS, offering promise for safer and effective platinum-based G4-targeted cancer therapy.Graphical

Synthesis and study of the inhibitory properties of a new Schiff base for C45 carbon steel in 1 M HCl

A newly Schiff base 1, 13-bis-[(4-dimethylamino) benzaldehyde 4, 7, 10-trioxatridecane-diimine] (DABT) was synthesized and characterized on the basis of the results of FT-IR, mass spectroscopy (MS), 1HNMR and 13CNMR. The desired performance of the organic compound DABT which is easy, inexpensive to prepare and eco-friendly, as a corrosion inhibitor for C45 carbon steel in 1 M HCl medium was evaluated using weight loss, potentiodynamic polarization, electrochemical impedance spectroscopy (EIS) measurements. The results suggest that the corrosion inhibition effectiveness increases with increasing inhibitor concentration and decreases with increasing temperature. The polarization experiments demonstrate that DABT exhibits the characteristics of a mixed-type inhibitor and follows the Langmuir isotherm in its adsorption behavior. Contact angle measurement revealed that the inhibitor on the surface of the carbon steel is hydrophobic. The synergistic effect of DABT has been investigated; inhibitory efficiency rises with increasing concentration of KI by competitive adsorption to form a layer of protection on the metal surface. Energy dispersive X-ray spectroscopy (EDS) combined with scanning electron microscope (SEM) was utilized to interpret the morphological study of the carbon steel surface. A good correlation was found between theoretical [Density functional theory (DFT), molecular dynamics simulation (MDS)] and experimental findings.

“Architectural Acupuncture” in Urban Morphology Studies

“Architectural Acupuncture” in Urban Morphology Studies

An electrochemical, and surface studies of synthesized Gemini ionic liquid as corrosion inhibitor for carbon steel in petroleum field

In this work, we study the efficiency of N1, N3-dibenzyl-N1, N1, N3, N3-tetramethylpropane-1,3-diaminium chloride, as anticorrosion. This compound exhibits potential as a prospective remedy to stop the deterioration of carbon steel caused by corrosion in 1.0 M HCl. The synthesis of this compound is described in a comprehensive manner, and its composition is supported by a range of precise analytical approaches such as elemental analysis, and mass spectroscopy. Based on the findings of the investigation, the synthesized Gemini ionic liquid demonstrates a robust capacity to slow down the rate at which the metal corrodes. The Prepared compound was evaluation by electrochemical and morphology study. Our results revealed that elevating the inhibitor concentration led to an augmentation in inhibition effectiveness, reaching up to 94.8% at 200 ppm of the synthesized compound at 298 K. It is crucial to emphasize that the recently prepared Gemini ionic liquid is consistent with the Langmuir adsorption model and function as a mixed inhibitor, participating in the physio-chemisorption process of adsorption.

A New Species and a New Record of Byssoid Arthoniaceae (Lichenized Ascomycota) from Southern China

This paper illustrates two species in the lichen-forming family Arthoniaceae from southern China, including a new species of Herpothallon, H. fibrosum L.L. Liu & Lu L. Zhang and a new record of Cryptothecia, C. striata G. Thor for China. Herpothallon fibrosum has fluffy, cylindrical pseudoisidia, like a bundle of fiber, and psoromic acid and confluentic acid are present. Furthermore, the new record of Cryptothecia striata has been identified by morphological, anatomical, chemical, and molecular studies. The systematic position of the two species was clarified by the molecular sequence data from the small subunit of the mitochondrial ribosomal DNA (mtSSU). Detailed taxonomic descriptions, chemical characters, comparisons, and discussion of the characteristics of similar species are provided for the two species; the relationship between Cryptothecia and Herpothallon is also discussed here.

Synergistic Effect of PBz/Epoxy/PCLA Composite Films with Improved Thermal Properties

Polybenzoxazines (PBzs) are advanced forms of phenolic resins that possess many attractive properties, including thermally induced self-curing polymerization, which produces void-free polymer products without any by-product formation. They also possess a high Tg (glass transition temperature) and thermal stability, but the produced materials are brittle in nature, due to which the final form of their application is very difficult. Hence, in this paper, an attempt has been made to overcome the brittleness of PBz by blending it with epoxy and ε-caprolactam (CPLA) to produce free-standing PBz/Epoxy/PCLA (polycaprolactam) films. The curing process between the three components (i.e., Bzo, epoxy, and caprolactam) was monitored using differential scanning calorimetric (DSC) analysis. The results show that there is no appreciable shift in curing the exotherm observed, except a slight shift in the curing process. However, the heat liberated during the exotherm (ΔH) decreases drastically from 121 to 84 J/g, indicating that the content of benzoxazine is very important as it is involved in the polymerization process through oxazine ring-opening. The morphological studies analyzed using SEM and AFM analyses indicate that there was no observable phase separation up to 30 wt.% of CPLA loading, whereas a higher CPLA content of 50 wt.% causes agglomeration and leads to distinctive phase separation. Moreover, the thermal stability of the composite film, PBz/Epoxy/PCLA30, is also increased with a 10% degradation temperature, T10, of 438 °C, when compared with an PBz/Epoxy film. From the obtained results, it is evident that the formation of a composite film through the melt blending process could produce a tough and thermally stable film without sacrificing individual properties.

Dual ionotropic crosslinked biopolymer magnetic nanocomposites as 5‐Fluorouracil nanocarrier for potential colorectal cancer treatment

AbstractThis study aimed to synthesize dual‐crosslinked chitosan‐alginate nanocomposites (Cs‐Alg/IO NCs) using green‐synthesized iron oxide nanoparticles (IO, Fe3O4 NPs) for drug delivery application. The NCs, formed via ionotropic gelation with sodium tripolyphosphate (TPP) and calcium chloride (CaCl2) as crosslinking agents for Cs and Alg, respectively, and further characterized for physiochemical properties. The presence of Fe3O4 NPs and 5‐Fluorouracil (5FU) increased hydrodynamic size (153.12 ± 0.57 to 207.64 ± 3.59 nm). Morphological studies revealed NC agglomeration within nanoscales. 5FU‐loaded Cs‐Alg/IO NCs (Cs‐Alg/IO 5FU NCs) exhibited superparamagnetic behavior and sustained drug release under various pH conditions. Cytotoxicity assays on colon cancer cells (HCT116 and HT‐29) and normal colon cells (CCD‐112) indicated higher cancer cell selectivity (selectivity index, SI = 1.91) in 2D models. Elevated IC50 values in 3D models were linked to lower drug loading capacity (LC) and encapsulation efficiency (EE). Overall, the study highlights the potential of dual‐crosslinked biopolymer NCs with green‐synthesized Fe3O4 NPs for developing an anticancer drug delivery system in colorectal cancer treatment.Highlights Synthesis of 5FU‐loaded dual crosslinked Cs‐Alg/IO NCs and Cs‐Alg IPN. Physicochemical characterization of cross‐linked magnetic nanocarriers. Investigation of sustained drug release using superparamagnetic nanocarriers. Evaluation of selective cytotoxicity for Cs‐Alg/IO 5FU NCs.

Central Retinal Vein Occlusion as the Debut of a Chronic Myeloproliferative Neoplasm

Introduction. Most retinal vascular diseases are associated with systemic risk factors such as hypertension, diabetes mellitus, age and smoking. However, in their absence, further examination is required to identify possible hematological disorders.Purpose. Improve the diagnostic and management scheme for patients with occlusion of the central retinal vein or its branches.Materials and methods. A clinical case of the onset of polycythemia vera with the central retinal vein occlusion is described. As part of the study, a molecular genetic analysis was carried out to identify the driver mutation JAK2V617F in peripheral blood as a screening diagnosis of Ph-negative chronic myeloproliferative neoplasms (CMN), a cytological, cytogenetic study of bone marrow aspirate and a morphological study of bone marrow trephine biopsy.Results. A mutant allele of the JAK2V617F gene with a diagnostically significant allele load of 14.61 % was determined in a patient hospitalized in the ophthalmology department with a diagnosis of central retinal vein occlusion (CRVO) of the right eye. The patient was referred for further examination to the Moscow City Hematology Center of Botkin City Clinical Hospital, where, aſter examination, the diagnosis was established: True polycythemia.Discussion. CMN are a group of tumor diseases of hematopoietic tissue characterized by malignant transformation of bone marrow stem cells with their subsequent clonal proliferation. Cytogenetic and molecular genetic disorders play a significant role in the pathogenesis of chronic CMN. True polycythemia, essential thrombocytemia, primary myelofibrosis belong to the group of classical Ph-negative CMP, Thrombotic, vascular and hemorrhagic complications are the most common causes of death in patients with this pathology.Conclusion. Previously, various ophthalmological manifestations and symptoms have been described in patients with CMN. The observed complications are diverse and oſten secondary to the pathognomonic hematological disorders for these diseases. It is worth considering the clinical value of molecular genetic analysis to detect the JAK2V617F mutation in patients with central retinal vein occlusion for early diagnosis of CMN and timely administration of appropriate therapy.

Design, In Vitro Evaluation and In Vivo Biocompatibility of Additive Manufacturing Three-Dimensional Printing of β beta-Tricalcium Phosphate Scaffolds for Bone Regeneration

The reconstruction of bone deficiencies remains a challenge due to the limitations of autologous bone grafting. The objective of this study is to evaluate the bone regeneration efficacy of additive manufacturing of tricalcium phosphate (TCP) implants using lithography-based ceramic manufacturing (LCM). LCM uses LithaBone TCP 300 slurry for 3D printing, producing cylindrical scaffolds. Four models of internal scaffold geometry were developed and compared. The in vitro studies included cell culture, differentiation, seeding, morphological studies and detection of early osteogenesis. The in vivo studies involved 42 Wistar rats divided into four groups (control, membrane, scaffold (TCP) and membrane with TCP). In each animal, unilateral right mandibular defects with a total thickness of 5 mm were surgically performed. The animals were sacrificed 3 and 6 months after surgery. Bone neoformation was evaluated by conventional histology, radiology, and micro-CT. Model A (spheres with intersecting and aligned arrays) showed higher penetration and interconnection. Histological and radiological analysis by micro-CT revealed increased bone formation in the grafted groups, especially when combined with a membrane. Our innovative 3D printing technology, combined with precise scaffold design and efficient cleaning, shows potential for bone regeneration. However, further refinement of the technique and long-term clinical studies are crucial to establish the safety and efficacy of these advanced 3D printed scaffolds in human patients.

Enhancing genetic variability in Trigonella species through sodium azide induction: morpho-physiological and chromosomal amelioration

Plant breeding, aimed at enhancing desired traits, depends on genetic diversity. Mutation breeding is a powerful method of rapidly expanding genetic diversity, facilitating crop improvement, and ensuring food security. In a recent study, researchers evaluated the genetic variability of Trigonella species using different doses of sodium azide (SA) (0.2%, 0.4%, 0.6%, 0.8%, and 1.0%) through morphological, physiological, and cytogenetic studies. Morphological variations were observed in cotyledonary leaves, vegetative leaves, and overall plant growth and habit. Several quantitative parameters, such as plant height, fertile branches per plant, pods per plant (or clusters), seeds per pod, and seed yield, increased when treated with 0.2% and 0.4% SA compared to the control. Furthermore, the total chlorophyll content and carotenoids increased in the sample treated with 0.2% SA over the control but decreased with higher concentrations. Scanning electron microscopy revealed that stomatal aperture and seed dimensions increased at lower concentrations of sodium azide treatment. The study found a positive correlation between the different parameters studied in the Trigonella species, as indicated by high r-values. Based on their findings, it was concluded that the genotype of fenugreek can be improved by using 0.2% and 0.4% concentrations of sodium azide. However, the evaluation of observed variants in successive generations is a critical and necessary process to validate their potential as keystones for crop genetic improvements.

Developmental events in the mandibular salivary gland of Indian sheep (Ovis aries): Morphological and histochemical studies.

At 22nd day of fetal development, the primordial anlage of mandibular gland was first noticed as a solid epithelial bud from oral epithelium. The terminal buds were arranged in the form of clusters with undifferentiated epithelial cells and terminated in a bulb like structure in 28-day-old fetus. The lumenization and branching of the main cord was noticed at 35th day. The primary septa, which divide the glandular mass into lobes was observed from 53rd day onwards which resulted in the formation of distinct lobulation at 58th day. At 61st day, the capsule formation was initiated by the aggregation of mesenchymal tissue. The terminal tubules differentiated to form the secretory end pieces and the tubular portion leads to the formation of intercalated and striated ducts at 98th day. Predominantly mucous types of acinar cells were seen from 108th day onwards. The number of lobules increased with steep increase in parenchyma from 128th day onwards. Micrometrical studies revealed that the mean diameter of acinar cells and all ducts was increased with the advancement of age and the significant differences were observed between groups. Localization of acidic and neutral mucopolysaccharides was observed in mucous cells and goblet cells. RESEARCH HIGHLIGHTS: The primordial anlage of mandibular salivary gland was seen at 22nd day. Lobulation of gland was appeared at 53rd day of development, however; it was completed at 58th day. At 98th day, the terminal tubules differentiated to form the secretory end pieces. The parenchyma of the gland showed predominantly mucous type of cells from 108th day onwards. Myoepithelial cells were first appeared as flattened basal cells initially around the developing acinar cells at 132nd day. Localization of acidic as well as neutral mucopolysaccharides was observed in mucous cells and goblet cells. Fine lipid droplets were observed in intralobular as well as interlobular connective tissue, however; phospholipids were observed in the cell membrane of secretory cells and ducts.

Optical and morphological studies of Titania nanotubes by varying anodization parameters

In this study, the self-organized Titania (TiO2) was created by anodizing pure titanium in a mixture of ethylene glycol, ammonium fluoride, and distilled water using an electrochemical cell. This study aims to examine how changes in anodization parameters impact the morphology and optical properties of Titania. The nanotubes achieved 10 μm length by applying less ammonium fluoride (NH4F) electrolytes. The energy dispersive X-ray spectroscopy (EDX) reveals that the prepared samples are essentially composed of TiO2. Mixed phases of rutile and anatase are obtained by increasing the annealing temperature from 360 to 480 ℃ and crystalline size seems to be reduced by increasing anodization potential, calculated by X-ray diffraction analysis (XRD), diffuse reflectance spectroscopy (DRS) helps to identify the bandgap value and the minimum value attained at 2.56 eV without doping and the electron-hole recombination rates calculated through the intensity of photoluminescence (PL) analysis. Ultimately, the optimal values of the anodization parameters for the generation of the most effective sample are determined.

Nanosilica from canary seed husk for corrosion protection of structural steel

AbstractAn alternative technique is presented for the corrosion protection of the A36 structural steel (A36SS) in acid medium (H2SO4) using silica obtained from canary seed husk (CSH). The silica was obtained in a solid amorphous state with a particle size of 10–22 nm. The anticorrosive properties of nanosilica (NS) were studied using potentiodynamic polarization (PDP), linear polarization resistance (LPR), and electrochemical impedance spectroscopy (EIS). Before carrying out the corrosion tests, the A36SS was subjected to a treatment with NaOH solution without and with the presence of NS. The A36SS treated with NS presented the lowest current density values and the noblest corrosion potential values, indicating that the corrosion rate decreased. The surface morphological study of the tested systems using SEM/EDS showed that the NS‐treated A36SS had a more efficient physical barrier against corrosive species.

Morphological and morphometric measurement of the temporomandibular joint of small and medium-weight dogs with different skull shapes

BackgroundThe recognition and diagnosis of canine temporomandibular joint (TMJ) disease can be a challenge, often leaving them undiagnosed. Although computed tomography (CT) has proved to be highly efficacious in detecting joint disease in the TMJ, morphometric and morphological studies of the normal TMJ have been scarce. Especially, skull type specific anatomical differences of the TMJ in dogs of different weights and skull morphologies have received limited attention.ObjectiveThis study aimed to compare the TMJ morphologies of dogs across different weight classes and skull types.Study designRetrospective study.MethodsCT scans were used to measure the depth and width of the Fossa mandibularis and two angles between the Fossa mandibularis and the Caput mandibulae in a total of 92 dogs and 182 mandibular joints, respectively.ResultsThe TMJ varied in terms of weight groups and skull indices. Shallow mandibular pits, underdeveloped retroarticular processes, and reduced joint congruency were observed particularly in light-weight and brachycephalic dogs. Conversely, dolichocephalic animals displayed deep joint pits, pronounced joint congruency, and a well-developed Processus retroarticularis.Main limitationsObserver learning curve; not every skull shape was represented in each weight group.

Molecular characterization uncovering a novel genus of tapering-filamentous cyanobacteria from Thailand: Phayaothrix lacustris gen. & sp. nov. (Nostocales, Cyanophyta)

In this study, novel Calothrix-like strains NUACC09 and NUACC10 were isolated from the surfaces of rocks in Phayao Lake, Thailand. Morphological, molecular and ecological comparisons were investigated to characterize the taxonomic status of these novel strains. Under the light microscope, morphological studies indicated that these two strains were morphologically similar to Calothrix but could be differentiated by production of a non-hyaline hair at the terminal end, a low degree of tapering, twisted or loop-forming filaments, a knotted growth form, intertwined trichomes and presenting more than one trichome within the single sheath. In the 16S rRNA and rbcLX gene phylogenetic tree analyses, our strains formed a monophyletic clade with former freshwater/terrestrial Calothrix-like taxa separating distantly from other Calothrix-like genera. Furthermore, low 16S rRNA gene sequence similarity (<94.9%) to the closely related genera and species delimitation analyses (PTP/bPTP, GMYC, ABGD and ASAP methods) indicated that this clade should be considered as a different cyanobacterial lineage. The phylogenetic tree and secondary structures (D1–D1′, V2, Box-B and V3 helix) based on 16S–23S rRNA ITS regions suggested that multiple species might be contained in this clade. Therefore, here, Phayaothrix was proposed as a novel cyanobacterial genus with Phayaothrix lacustris sp. nov. as the type species following the International Code of Nomenclature for algae, fungi and plants.

A study of two young multipolar planetary nebulae: Hen 2-73 and Hen 2-96

We perform an infrared (IR) spectral and visible morphological study of two young planetary nebulae (YPNe) Hen 2-73 and Hen 2-96 using archival Spitzer Space Telescope and Hubble Space Telescope (HST) observations to understand their dust properties and nebular structures. High-resolution HST images of these nebulae show several bipolar lobes and ionised tori in the central regions of both objects. The presence of these multi-lobe structures suggests that the formation process of these nebulae is complex. To search for a possible link between the central sources and multipolar appearances of these objects, the Transiting Exoplanet Survey Satellite (TESS) observations are used to examine whether their central stars (CSs) exhibit periodic photometric variations. In the TESS observations, the CS light curve of Hen 2-96 shows a photometric variation with a period of 2.23 hr. The IR spectra of these two YPNe suggest that the nebulae have mixed dust environments, which are associated with the presence of dense tori created by central binary interactions in these objects. Two three-dimensional models are constructed to study the complex nebular structures of the YPNe. These simulations suggest that the number of multipolar YPNe may be larger than observed. In addition, we analyse the spectral energy distributions of these nebulae to study their gas, dust, and photospheric components.

Design, Synthesis, and Antifungal Activity of Acrylamide Derivatives Containing Trifluoromethylpyridine and Piperazine.

In this study, a series of acrylamide derivatives containing trifluoromethylpyridine or piperazine fragments were rationally designed and synthesized. Subsequently, the in vitro antifungal activities of all of the synthesized compounds were evaluated. The findings revealed that compounds 6b, 6c, and 7e exhibited >80% antifungal activity against Phomopsis sp. (Ps) at the concentration of 50 μg/mL. Furthermore, the EC50 values for compounds 6b, 6c, and 7e against Ps were determined to be 4.49, 6.47, and 8.68 μg/mL, respectively, which were better than the positive control with azoxystrobin (24.83 μg/mL). At the concentration of 200 μg/mL, the protective activity of compound 6b against Ps reached 65%, which was comparable to that of azoxystrobin (60.9%). Comprehensive mechanistic studies, including morphological studies with fluorescence microscopy (FM), cytoplasmic leakage, and enzyme activity assays, indicated that compound 6b disrupts cell membrane integrity and induces the accumulation of defense enzyme activity, thereby inhibiting mycelial growth. Therefore, compound 6b serves as a valuable candidate for the development of novel fungicides for plant protection.

Statocyst Ultrastructure in the Norwegian Lobster (Nephrops norvegicus)

Statocyst anatomy and fine morphology in Norwegian lobster (Nephrops norvegicus) are studied for the first time using scanning and transmission electron microscopy. N. norvegicus exhibits sensory setae projecting from the statocyst inner cavity floor into a mass of sand granules (statoconia) embedded in a gelatinous substance. The setae are distributed in four areas: a curved field made up of an inner single row and an outer double row that run on a circle around the medial and lateral rim of the central depression, a small setal field in the posterior part, a large setal field, opposite to the small field, and a short row, running internally and lying parallel to the inner single row, next to the small setal field. A study of the fine morphology of the statocyst sensory setae shows that the structure of the setae in the different areas is similar, with a bulb (the proximal portion of the sensillum), a setal shaft, a tooth (the smooth portion of the bulb), a fulcrum (a transverse fold), and filamentous hairs. The hair cells are firmly implanted within the cuticular layer. Although the type of innervation of the statocyst was not determined in the present study, the close taxonomic position of the lobster to that of the crayfish and crab would suggest that the setae in N. norvegicus are pure mechanoreceptors rather than sensory cells.

New occurrences of mammals from McKay Reservoir (Hemphillian, Oregon)

Abstract Encompassing global cooling, the spread of grasslands, and biogeographic interchanges, the Hemphillian North American Land Mammal Age is an important interval for understanding the factors driving ecological and evolutionary change through time. McKay Reservoir near Pendleton, Oregon is a natural laboratory for analyses of these factors. It is remarkable for its small vertebrate fauna including rodents, bats, turtles, and lagomorphs, but also for its larger mammal fossils like camelids, rhinocerotids, canids, and felids. Despite the importance of the site, few revisions to its faunal list have been published since its original description. We expand on this description by identifying taxa not previously known from McKay Reservoir based on specimens collected during fieldwork and through reidentification of previously collected fossils. Newly identified taxa include the borophagine canid Borophagus secundus (Matthew and Cook, 1909), the camelids Megatylopus Matthew and Cook, 1909 and Pleiolama Webb and Meachen, 2004, a dromomerycid, and the equids Cormohipparion Skinner and MacFadden, 1977 and Pseudhipparion Ameghino, 1904. Specimens previously assigned to Neohipparion Gidley, 1903 and Hipparion de Christol, 1832 lack the features necessary to diagnose these genera, which are therefore removed from the site's faunal list. The presence of Borophagus secundus, Cormohipparion, and Pseudhipparion is especially important, because each occurrence represents a major geographic range extension. This refined understanding of the fauna lays the foundation for future studies of taphonomy, taxonomy, functional morphology, and paleoecology—potentially at the population, community, or ecosystem levels—at this paleobiologically significant Miocene locality.