Morphological Characterization Research Articles

Morphological Characterization, Polyphenolic Profile, and Bioactive Properties of Limoncella, an Ancient Mediterranean Variety of Sweet Citrus.

Limoncella of Mattinata, a rare and ancient Mediterranean citrus fruit, was investigated by sequence analysis of the ribosomal internal transcribed spacer regions, which assigns it as a variety of Citrus medica L. Morphological, chemical, and biomolecular approaches, including light and electron microscopy, HPLC-ESI-MS/MS, and antioxidant and anti-inflammatory assays, were used to characterize the flavedo and albedo parts, usually rich in bioactive compounds. The morphological findings showed albedo and flavedo cellular structures as "reservoirs" of nutritional components. Both albedo and flavedo hydroalcoholic extracts were rich in polyphenols, but they were different in compounds and quantity. The flavedo is rich in p-coumaric acid and rutin, whereas the albedo contains high levels of hesperidin and quercitrin. Antioxidant, anti-inflammatory, and genoprotective effects for albedo and flavedo were found. The results confirmed the health properties of flavedo and highlighted that albedo is also a rich source of antioxidants. Moreover, this study valorizes Limoncella of Mattinata's nutritional properties, cueing its crops' repopulation.

Structural and morphological studies of g-C3N4-functionalized MWCNTs nanocomposite for sunlight-responsive photocatalytic activity

Photocatalytic degradation of organic contaminants has been proven to be one of the greatest economical and efficient techniques to address environmental pollution problems. Multi-walled carbon nanotubes (MWCNTs)/g-C3N4 (GCN) nanocomposites (NCs) were synthesized by a hydrothermal process aided by ultrasound to produce active photocatalysts. The effective synthesis of GCN, MWCNTs, and MWCNTs/GCN NCs was confirmed by X-ray diffraction (XRD) patterns. The fabrication of GCN nanosheets (NSs), the nanotubular structure of MWCNTs, and a network of neuron-like structures for MWCNTs/GCN NCs were all revealed by structural and morphological characterization. The elemental mapping of NCs containing the suitable quantity of MWCNTs revealed a uniform distribution of the sample's component elements. When the optical properties of the fabricated nanomaterials were examined by employing UV–visible spectroscopy, the results revealed a blue shift (a shift of maximum absorption to the UV region), which suggests that the addition of MWCNTs increased the band-gap energy. The behaviour of e––h+ pair recombination was revealed by measuring the charge carrier movement and trapping efficiency using photoluminescence (PL) spectroscopy. Crystal violet (CV) dye was photocatalytically degraded using prepared NCs in the presence of sunlight, and the synergistic effects of GCN and MWCNTs were examined. With a degradation efficiency of 99.32 %, MWCNTs/GCN NCs demonstrated the best sunlight-irradiated photocatalytic activity for CV degradation. The degradation of CV was discovered to follow pseudo-first-order kinetics. Throughout five consecutive studies, the NCs demonstrated the highest levels of catalytic efficiency and recyclability, with 5 % reduced degrading activities. The trapping tests showed that the primary reactive species involved in the breakdown of CV were the •O2– and •OH radicals.

Twisted Structure Induced Solid-State Fluorescence and Room-Temperature Phosphorescence from Furan-Based Carbon Dots.

Boron doping can effectively induce solid-state fluorescence (SSF) in carbon dots (CDs); however, research on the intrinsic mechanism underlying this phenomenon is lacking. Herein, a design strategy for boron-doped furan-based CDs is proposed, CDs with aggregation-induced emission (AIE) properties are synthesized, and the mechanism by which boron atom dopants induces SSF and room-temperature phosphorescence (RTP) is elucidated. The morphology and structural characterization of the CDs indicate that boron doping leads to structural twisting of the CDs. The AIE phenomenon of CDs arises from the inhibition of the twisted structure motions and a reduction in the nonradiative relaxation rate during the aggregation process. In addition, CDs with twisted structures exhibit a smaller overlap between the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO), effectively reducing the singlet-triplet splitting energy (ΔEST). CDs embedded in microcrystalline cellulose (MCC) exhibit green RTP because the nonradiative transitions are suppressed, and the excited triplet species remain stable. For the first time, this study reveals the structure-activity relationship between the twisted structure and optical properties of CDs, providing a new approach for the preparation of solid-state light-emitting CDs.

Investigation geographic origin of Laurus nobilis L. leaves using FTIR, SEM-EDX, and XRD analysis

Laurus nobilis L. is a polypragmatic plant with high added value. Leaves collected from different regions in the natural state without breeding have different economic values. In this study, the Geographic Origin and Altitude Effects of Laurus nobilis L. leave samples collected from provinces close to each other were investigated. For this purpose, SEM–EDS was used for morphological characterization of leaves, XRD was used for the characterization of inorganic components and FTIR-ATR was used for the identification of functional groups. By SEM analysis in the samples from Zonguldak region, significant differences were observed in the density of trichomes and glandular plumes more dense and also morphological cell sizes were found to be more large then Kastamonu region. In XRD plot, besides the amorphous state, it has seen that the crystal structure is also present in the structure. The effect of different altitudes on the FTIR spectra of the samples collected according to the provinces was also examined, and no significant difference was observed in the peak positions and intensities in the spectra according to the altitudes. Score plot on ranges of 2800–3000 cm-1 and 750–1800 cm−1 allowed origin of the Laurus nobilis L. discrimination. In order to analysis and classify them according to their geographical origin, FTIR data were combined with chemometric methods using PCA and discriminant analysis. PCA analysis explained 88.7% of the variance in the model. When the results of the discriminant analysis were evaluated, 56 of the 72 samples were classified correctly and 77.8% success was achieved. Both analysis showed that there are differences in the response of the same plant species to their presence in different origins. As a result, FTIR analysis allowed possibility the discrimination of Laurus nobilis L. leaves and in this way it is thought to discriminate of examples for other areas.

Curcumin is an efficacious therapeutic agent against Chilodonella uncinata via interaction with tubulin alpha chain as protein target

Chilodonella, a parasitic ciliate that infects both cold water and warm water fish, can impede the growth of juvenile fish and cause considerable economic losses globally to freshwater aquaculture. In this study, the parasite was collected from both the gills and zygotes of largemouth bass (Micropterus salmoides). Isolated from diseased fish, the parasites were identified as Chilodonella uncinata based on morphological features and genetical diagnostic characterization using the partial small subunit ribosomal RNA gene. To develop an effective approach to treat chilodonellosis caused by C. uncinata in largemouth bass farming, we first developed an in vivo culture model for propagating C. uncinate and thus could use for morphological characterization, molecular analyses and antiparasitic drug screening. Curcumin was successfully identified as an efficacious anti-C. uncinata agent from 26 phytochemical compounds. When administered at a concentration of 6 mg/L, curcumin not only completely cured infected largemouth bass but also shielded uninfected fish from C. uncinata infections. The 24 h median effective concentration (EC50) of curcumin against C. uncinata was 3.098 mg/L. Remarkably, the 96 h median lethal concentration (LC50) of curcumin against largemouth bass was determined to be 17.143 mg/L, approximately 5.533 times higher than EC50. The mechanism of action of curcumin was investigated by the cellular thermal shift assay, demonstrating that tubulin alpha chain was the binding target for curcumin. Moreover, SEM investigations further provided morphological evidence suggesting that curcumin induces parasite demise by disrupting the parasite's body surface and subsequently infiltrating its interior. These findings collectively emphasize the potential of curcumin as a safe and effective therapeutic agent for controlling C. uncinata in aquaculture.

Microscopic Characterization of the Infectious Process, ROS Production, and Fungi Cellular Death of Alternaria alternata on Tangerine Resistant to QoIs.

Quinone outside inhibitor (QoI) fungicide resistance in Alternaria alternata populations was reported in Brazil for the first time in 2019, in São Paulo orchards, and the mutation G143A in cytochrome b (cytb) was found in resistant isolates. Our study investigated the infectious process, production of reactive oxygen species (ROS), and fungal cell death in resistant (QoI-R) and sensitive (QoI-S) A. alternata pathotype tangerine (Aapt) isolates. Morphological characterization of Aapt isolates was performed using confocal laser scanning microscopy (CLSM). Alternaria brown spot (ABS) symptoms were produced by Aapt isolates on tangelo cv. BRS Piemonte. Germination of QoI-R conidia and production of germ tubes on tangelo leaflets treated with 100 μg mL-1 of pyraclostrobin 18 h after inoculation (hai) was observed using scanning electron microscopy (SEM). At the same time, QoI-S conidial germination was inhibited on tangelo leaflets treated with pyraclostrobin. ROS production and cell death in Aapt isolates at high fungicide concentrations were observed using CLSM. QoI-S conidia exhibited high ROS production, indicating high oxidative stress. When dyed with propidium iodate (PI), QoI-S conidia emitted red fluorescence, showing cell death and confirming their sensitive phenotype. In contrast, QoI-R conidia neither produced ROS nor exhibited red fluorescence, indicating no cell death and confirming their resistant phenotype. Therefore, our findings evidence that microscopic techniques may help characterize events during fungi-plant interactions, ROS production, cell death, and Aapt phenotypes resistant and sensitive to QoIs using fluorometric protocols.

Biological characterization and in vitro fungicide screening of a new causal agent of walnut leaf spot in Guizhou Province, China.

Walnut (Juglans regia L.) is a widely grown nut plant worldwide, including in Guizhou Province, located in southwest China. The high quality and special taste make Guizhou walnuts, particularly those produced in Hezhang County, a "Chinese National Geographical Indication Product" that substantially contributes to the local economy and grower's income. In July 2022, a serious occurrence of leaf spot disease was observed in a walnut plantation area, Shuitang Town, Hezhang County, Guizhou Province, China (27°07'67″N, 104°64'61″E). The causal agent was identified as Didymella segeticola through morphological characterization and amplification and sequencing of the internal transcribed spacer (ITS) region, beta-tubulin (TUB) gene, and glyceraldehyde-3-phosphate dehydrogenase (G3PD) gene. Koch's postulates, including re-isolation and identification, were performed to confirm its pathogenicity on healthy leaves. To our knowledge, this is the first report of D. segeticola causing leaf spot on walnuts worldwide. Further, to determine its biological characteristics, which could be utilized for future disease management, the effects of temperature, light, and carbon and nitrogen resources on mycelial growth, conidia production, and conidia germination and the effects of humidity on conidia germination were studied. The optimum temperature for mycelial growth of representative strain D. segeticola C27 was 20°C. Increasing the light period significantly decreased conidia production and conidia germination. Maltose and beef extract were the best carbon and nitrogen sources, respectively, for the pathogen. Conidia germination was enhanced at 90% humidity. In vitro screening of effective fungicides was conducted. Among the 20 screened fungicides, difenoconazole showed the best inhibition rate, with an EC50 (concentration for 50% of the maximal effect) of 0.0007 μg/mL. Tetramycin also showed sufficient inhibitory effects against D. segeticola, with an EC50 value of 0.0009 μg/mL. Our study provides new insights into the causal agent of walnut leaf spot in Guizhou, China, as well as the first pathogen characteristics and promising candidate fungicides for its management.

Determination of the Optimum Architecture of Additively Manufactured Magnetic Bioactive Glass Scaffolds for Bone Tissue Engineering and Drug-Delivery Applications.

For better bone regeneration, precise control over the architecture of the scaffolds is necessary. Because the shape of the pore may affect the bone regeneration, therefore, additive manufacturing has been used in this study to fabricate magnetic bioactive glass (MBG) scaffolds with three different architectures, namely, grid, gyroid, and Schwarz D surface with 15 × 15 × 15 mm3 dimensions and 70% porosity. These scaffolds have been fabricated using an in-house-developed material-extrusion-based additive manufacturing system. The composition of bioactive glass was selected as 45% SiO2, 20% Na2O, 23% CaO, 6% P2O5, 2.5% B2O3, 1% ZnO, 2% MgO, and 0.5% CaF2 (wt %), and additionally 0.4 wt % of iron carbide nanoparticles were incorporated. Afterward, MBG powder was mixed with a 25% (w/v) Pluronic F-127 solution to prepare a slurry for fabricating scaffolds at 23% relative humidity. The morphological characterization using microcomputed tomography revealed the appropriate pore size distribution and interconnectivity of the scaffolds. The compressive strengths of the fabricated grid, gyroid, and Schwarz D scaffolds were found to be 14.01 ± 1.01, 10.78 ± 1.5, and 12.57 ± 1.2 MPa, respectively. The in vitro study was done by immersing the MBG scaffolds in simulated body fluid for 1, 3, 7, and 14 days. Darcy's law, which describes the flow through porous media, was used to evaluate the permeability of the scaffolds. Furthermore, an anticancer drug (Mitomycin C) was loaded onto these scaffolds, wherein these scaffolds depicted good release behavior. Overall, gyroid-structured scaffolds were found to be the most suitable among the three scaffolds considered in this study for bone tissue engineering and drug-delivery applications.

Identification and characteristics of Plesiomonas shigelloides isolated from Mastacembelus armatus

Plesiomonas shigelloides (P. shigelloides), a dominant pathogenic strain identified as YY001, was successfully isolated and characterized from the hepatopancreas of diseased Mastacembelus armatus (M. armatus) for the first time. The strain was identified through a comprehensive approach that included morphological, physiological, and biochemical characterization, as well as 16S rRNA, 23S rRNA, and gyrB gene sequence analysis. Strain YY001 is classified as a Gram-negative bacterium, with optimal growth conditions observed at 28°C and pH 7.0. Results from the bacterium hemolysis test indicated the absence of hemolytic activity in YY001. However, the strain exhibited amplification of nine virulence genes: nanE, waaA, clpP, ssb, actP, aphA, astA, astD, and astB. Drug-resistance testing showed that YY001 displayed resistance only to penicillin G, oxacillin, norfloxacin, and tetracycline, while remaining sensitive to the majority of other antibiotics. Furthermore, nine drug-resistance genes, including emrD, catB, macB, ksgA, tolC, bacA, MdfA, sul1, and DegP, were detected through amplification. Experimental infection demonstrated that YY001 induced symptoms such as abdominal swelling, visceral edema, and hemorrhage, with hepatopancreatic manifestations being particularly severe. The median lethal dosage of strain YY001 in M. armatus was 9.7×108 colony-forming units (CFU)/mL within 48 h, and 4.9×106 CFU/mL within 192 h under the conditions of intraperitoneal injection. The hepatopancreas, gill, and intestine of infected fish showed obvious pathological symptoms, including tissue loosening, hemorrhage, and cell necrosis. The results of this study provided evidence for a more comprehensive understanding of P. shigelloides strain YY001 infection in M. armatus.

Enhanced Photodetection Performance of WSe2/V2O5 Nanocomposite on Flexible Substrate: Synergistic Advantages and Improved Efficiency.

The two-dimensional (2D) chalcogenide WSe2/V2O5 composite nanostructures were synthesized using the hydrothermal method and extensively characterized with various spectroscopic techniques. X-ray diffraction analysis confirmed the hexagonal crystal structure exhibiting space symmetry of P63/mmc. Scanning electron microscopy images provided insights into the irregular and nonuniform morphology. Optical spectrum analysis indicated a band gap value of 2.01 eV for 15% WSe2/V2O5 nanostructures, as determined by the Wood and Tauc equation. Photoluminescence (PL) excitation spectra at emission wavelengths of 550 and 750 nm exhibited broad emission attributed to self-trapped excitons for V2O5 and WSe2 nanostructures. Under excitation at λexc = 365 nm, PL emission spectra displayed distinct peaks at 550 and 750 nm, demonstrating the ability to emit vivid red light. A device optimized for photoresponsivity (R) of approximately 7.80 × 10-1 A W-1 and detectivity (D) of around 8.65 × 1011 Jones, and quantum efficiency of approximately 3.42 × 10-2 A W-1 were achieved at a wavelength of 390 nm while using a lamination sheet as a substrate. These findings underscore the capability of devices for efficient photoconversion at specified wavelengths, indicating potential applications in sensing, imaging, and optical communication. The photoresponsivity of the device remained stable at 3.38 × 10-3 A W-1 at 0° and 3.09 × 10-3 A W-1 at 55° bending angle. This indicates the resilience of device to mechanical strain, making it ideal for flexible and wearable sensor applications. The structural, morphological, and optical characterizations confirm the suitability of luminescent WSe2/V2O5 chalcogenide for practical optoelectronic applications, especially in display technologies.

Fabrication of ultra-sensitive and disposable electrochemical biosensor: Detection of kidney injury molecule-1 protein in urine for diagnosis of kidney injury

This research study indicates the development of the indium tin oxide-polyethylene terephthalate (ITO-PET) coated electrode-based electrochemical biosensor system to sensitively and specifically detect kidney injury molecule-1 (KIM-1), an acute kidney injury (AKI) biomarker. The ITO-PET electrode surface was modified with 3-(Trimethoxysilyl)-1-propanethiol (3-TMESP) silane agent. Electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), and single frequency impedance (SFI) techniques were utilized to examine the interactions between anti-KIM-1 antibody and KIM-1 antigen. The ITO-PET electrode surface was observed by scanning electron microscopy (SEM) and atomic force microscopy (AFM) to analyze the morphological characterization at each electrode development stage. Optimization studies have been conducted to determine the optimal concentrations for detecting the 3-TMESP silane agent, the NHS crosslinker, the anti-KIM-1 antibody, and the optimum incubation period for the anti-KIM-1 antibody and the KIM-1 antigen. Analytical characteristic properties of the developed biosensor, including linear determination range, and the studies of reproducibility, regeneration, repeatability, storage life, and selectivity were investigated. The KIM-1 biosensor system, based on 3-TMESP, has a broad linear range and is capable of providing sensitive measurements between 0.1 fg/mL and 1000 fg/mL. The values of low limits of detection (0.26 fg/mL) and of quantification (0.87 fg/mL) were calculated, highlighting its high sensitivity and precision in detecting KIM-1. In addition, five different commercially purchased human urine samples were tested to validate the practicability of the developed biosensor.

First report of Colletotrichum nymphaeae causing anthracnose on Hass avocados in Brazil.

The Hass cultivar is one of the most cultivated and distributed avocado varieties throughout the world, having high productivity, nutritional quality, market acceptance and adaptation to different climatic zones (Dreher and Davenport 2013). Anthracnose affects avocado production in tropical and subtropical regions, causing economic losses, especially post-harvest (Fuentes-Aragón et al. 2020). Correct identification of Colletotrichum species causing anthracnose is essential, as different species vary in important phenotypes such as virulence and sensitivity to fungicides (Chen et al. 2016). Twelve samples from batches of avocados with anthracnose were collected in Minas Gerais State, Brazil, in September 2023. The observed symptoms were brown to black depressed circular spots, ranging from a few millimeters to 3 cm in diameter on the epicarp of the fruits, covered in center by mucilaginous layers of pathogen sporulation. Isolation was performed directly from the spore masses and monoconidial isolates were cultured in PDA at 25°C for 7 days for morphological characterization and preserved in sterile water at 4°C. One of the morphotypes commonly recovered from lesions, represented by isolate UCBV 362 (Culture Collection COAD 3843), formed fast-growing colonies having white aerial mycelium and intense salmon-colored sporulation. The cylindrical conidia were 13 to 17.5 μm long and 4.5 to 7 μm wide (average 14.5 x 5.7 μm, N=100), produced on conidiophores dispersed in the aerial mycelium or aggregated on melanized conidiomata formed on the agar. The partial sequence of the second largest subunit of the RNA polymerase II gene (RPB2) from isolate UCBV 362 (GenBank: PQ034617, 1116 nt) showed 99% of coverage and 99.37% of nucleotide identity with the RPB2 sequence of the ex-epitype strain of Colletotrichum nymphaeae ICMP 17918 (=CBS 515.78) (GenBank: JN985506). In a Maximum Likelihood phylogenetic tree composed with RBP2 sequences from reference strains of the Colletotrichum acutatum species complex, the isolate UCBV 362 formed a highly supported clade with the ex-epitype and other reference strains of Colletotrichum nymphaeae, occupying the Clade 2 of the species complex together with C. scovillae and C. simmondsii (Damm et al. 2012). This result shows the reliability of RPB2 for phylogeny and species delimitation within Colletotrichum. To confirm pathogenicity, 10-mm discs from a 7-day-old colony were inoculated at 3 different points on healthy-looking avocado fruits and incubated at 28°C. Uninoculated fruits served as controls. The first symptoms appeared 5 days after inoculation and were similar to those observed in the original samples, while the fruits in the control group remained asymptomatic. The pathogen was reisolated from the lesions and identified morphologically, fulfilling Koch's postulates. Colletotrichum nymphaeae has been associated with avocado anthracnose in Mexico (Fuentes-Aragón et al. 2020). In Brazil, a study based on molecular phylogeny identified Colletotrichum siamense and C. karsti as etiological agents of this disease (Soares et al. 2021). This report expands the range of species that cause avocado anthracnose in Brazil and provides etiological information for the implementation and monitoring of control methods, especially chemical control.

Morphological and agronomic characterization of fava bean genotypes (Phaseolus lunatus L.) cultivated in the state of Ceará

A fava (Phaseolus lunatus L.) é uma leguminosa cultivada em todas as regiões do Brasil, sobretudo na região Nordeste, em que apresenta maior produção. O objetivo desta pesquisa foi realizar a identificação dos caracteres morfológicos e agronômicos de 15 genótipos de fava cultivados em diferentes municípios do estado do Ceará, para obtenção de informações sobre os descritores que possam contribuir para estudos de caracterização e variabilidade genética desta cultura. Os ensaios foram conduzidos na área experimental do Laboratório de Ecofisiologia Vegetal (ECOFISIO) da Universidade Estadual do Ceará (UECE), em Fortaleza–CE. Analisaram-se 38 descritores para identificação e caracterização dos genótipos estudados. Observou-se que os descritores peso de cem sementes, comprimento e largura das sementes foram os que mais contribuíram para a variabilidade genética dos genótipos analisados. Os genótipos BF 304, BF 308 e BF 312 foram os que apresentaram maiores valores para estes parâmetros, tornando-se os genótipos promissores para o melhoramento genético. Os aspectos botânicos que permitiram diferenciar os genótipos analisados foram cor e forma do tegumento; cor do hipocótilo e dos cotilédones; textura da testa; cor das nervuras e presença de antocianinas das folhas primárias; cor da folha; forma do folíolo central; cor da quilha e das asas na inflorescência; forma do ápice, curvatura e cor da vagem. Desta forma, conclui-se que a análise destes descritores é importante na diferenciação e determinação de cultivares de fava mais produtivas no estado do Ceará, visto que há informações escassas sobre a diversidade genética e o potencial agronômico desta cultura no Brasil.

Nuanced synthesis strategies and comprehensive analysis of intricate multifarious luminescent phosphor hosts

AbstractThis paper primarily addresses various methodologies for synthesizing novel phosphors, with our focus mainly on the mixed alkaline tungstate phosphor Ca2MgWO6. In the initial synthesis phase, we used precisely weighed CaCO3, MgO, and WO3 for the synthesis. The XRD patterns indicated the presence of an impure phase, specifically CaWO4, in the resulting product. We adeptly tackled the formation of CaWO4 and mitigated it by employing a multifaceted approach. These included adding an excess amount of MgO, opting for an alternative chemical route, and the incorporation of flux during synthesis. It was observed that the product obtained through the addition of flux exhibited a purity level of approximately 99.75% with a margin of error of ± 0.02%. Ultimately, we have carried out structural, morphological, optical, and thermal characterizations, along with density functional theory (DFT) simulations, to assess the fundamental parameters of the pure sample.

SPECIES IDENTIFICATION AND IN VITRO ANTIFUNGAL SUSCEPTIBILITY TESTING OF ASPERGILLUS ISOLATED FROM VARIOUS CLINICAL SAMPLES

Objectives: Aspergillus is ubiquitous mold species present in environment in the form of spores. Infection due to Aspergillus is uncommon in immunocompetent individuals unless they possess any abnormality or have undergone any treatment with corticosteroids. In immunocompromised individuals, infection by this fungus is common among people with prolonged neutropenia, transplants, and human immunodeficiency virus infection. The symptoms are diverse, ranging from allergic reactions to invasive aspergillosis and life-threatening complications. The aim of this study is to isolate and identify Aspergillus species obtained from various clinical specimens and perform antifungal susceptibility testing (AFST). Methods: A total of 200 isolates in which positive direct microscopic findings correlated well with culture growth for Aspergillus were included. Antifungal susceptibility was performed by micro broth dilution technique according to clinical laboratory standard institute M38-A2 guidelines. Results: Aspergillus flavus was found to be predominant species followed by Aspergillus fumigatus. AFST was performed, where all Aspergillus strains exhibited low minimum inhibitory concentration (MIC) and minimum effective concentration (MEC) values for most of antifungal drugs tested except for one strain of A. flavus, which exhibited high MIC for voriconazole and high MEC for caspofungin. Conclusion: Polyenes, azoles, and echinocandin resistance are emerging in many parts of the world. Therefore, continued application of AFST combined with morphological characterization for species identification is critical in detecting the emergence of resistance among various Aspergillus species to reduce mortality, morbidity, and overcome treatment failure.

Three-Dimensional Morphological Study of MnTe-like Structures by Assessment of Tortuosity Tensor Using Computational Fluid Dynamics

This paper focuses on a morphological study of the MnTe-like structures, carried out by the evaluation of the tortuosity tensor and other related parameters using a computational fluid dynamics approach recently developed by our research group. The present work focuses on all possible crystals—existing or not developed yet—having the same structure as that of the manganese telluride. This analysis provides new information not present yet in the open literature. The motivation behind this study lies in the importance of this type of structure in physics and material science. In particular, the structures investigated are anisotropic and bi-disperse, with two independent geometrical parameters controlling the structure shape: the ratio of the particle diameters (r1) and the normalised inter-particle distance (r2). Exploiting this fact, several different structures of the same family are created, changing these two parameters independently, also allowing inter-penetration of particles to enlarge the study’s applicability. The results are primarily obtained in terms of the tortuosity tensor, needed to catch and quantify the anisotropy of the structures. Then, other morphological parameters, such as connectivity, principal diffusion directions, and anisotropy factors, are evaluated, obtaining in this way a novel morphological characterisation of the structure. It is found that high values of tortuosity are observed at lower and higher values of {r1, r2}, which means that there exists a minimum value between them. Additionally, the anisotropy factor is found to be higher at lower values of {r1, r2} and lower at higher ones. This is in accordance with the fact that, as the inter-particle distance and the ratio between particle diameters increase, the structure enlarges, which implies a lower influence of the particle distribution and, thus, a gradually more isotropic structure.

Solanum tuberosum leaf extract as an eco-friendly corrosion inhibitor for Q235-steel in HCl medium: Experimental and theoretical evaluation

Solanum tuberosum leaf extract (STLs), used as a biodegradable corrosion inhibitor, was prepared to mitigate the corrosion rate of Q235 steel in HCl medium. The active inhibitory components existing in STLs were tracked by Fourier transform infrared spectroscopy. Electrochemical measurements, morphological characterization and contact angle tests were combined to evaluate the anti-corrosion performance of STLs at various concentrations and different temperatures, and the results show that the addition of STLs can evidently magnify the charge transfer resistance, expand the double layer capacitance at electric/solution interface, and simultaneously reduce the corrosion current density of Q235 steel in HCl medium with the maximum inhibition efficiency of 91.89 %. The adsorption behavior of STLs on steel was investigated using X-ray photoelectron spectroscopy and adsorption models. It is revealed that the molecules of STLs spontaneously bind to the substrate through chemical and physical action, forming a protective layer to block the diffusion pathway of harsh ions. Furthermore, theoretical calculations confirm that Solanum tuberosum leaves components were adsorbed on steel substrates through donor-acceptor interactions.

Molecular characterization of plant growth-promoting Trichoderma from Saudi Arabia.

Fungi in the genus Trichoderma are widespread in the environment, mainly in soils. They are used in agriculture because of their mycoparasitic potential; Trichoderma have the ability to increase plant health and provide protection against phytopathogens, making them desirable plant symbionts. We isolated, identified, and characterized Trichoderma from different regions of Saudi Arabia and evaluated the ability of Trichoderma to promote plant growth. Morphological and molecular characterization, along with phylogenetic studies, were utilized to differentiate between Trichoderma species isolated from soil samples in the Abha and Riyadh regions, Saudi Arabia. Then, plant growth-promoting traits of the isolated Trichoderma species were assessed. Eight Trichoderma isolates were characterized via morphological and molecular analysis; six (Trichoderma koningiopsis, Trichoderma lixii, Trichoderma koningii, Trichoderma harzianum, Trichoderma brevicompactum, and Trichoderma velutinum) were from Abha and two (T. lixii and T. harzianum) were from Riyadh. The isolated Trichoderma strains belonged to three different clades (Clade 1: Harzianum, Clade 2: Brevicompactum, and Clade 3: Viride). The Trichoderma isolates varied in plant growth-promoting traits. Seeds treated with most isolates exhibited a high percentage of germination, except seeds treated with the T3-T. koningii isolate. 100% germination was reported for seeds treated with the T4-T. harzianum and T6-T. brevicompactum isolates, while seeds treated with the T1-T. koniniopsis and T5-T. lixii isolates showed 91.1% and 90.9% germination, respectively. Seeds treated with the T8-T. velutinum, T2-T. lixii, and T7-T. harzianum isolates had germination rates of 84.1%, 82.2%, and 72.7%, respectively. The Trichoderma isolate T5-T. lixii stimulated tomato plant growth the most, followed by T7-T. harzianum, T8-T. velutinum, T4-T. harzianum, T1-T. koniniopsis, T2-T. lixii, and T6-T. brevicompactum; the least effective was T3-T. koningii. A maximum fresh weight of 669.33mg was observed for the T5-T. lixii-treated plants. The Abha region had a higher diversity of Trichoderma species than the Riyadh region, and most isolated Trichoderma spp. promoted tomato growth.

A novel Co/Zn-ferrite molecularly imprinted polymer-based electrochemical assay for sensing of gallic acid in plant extracts, wine, and herbal supplement.

In this study, a new molecularly imprinted polymer (MIP)-based sensor platform was developed for the electrochemical determination of gallic acid (GAL) in plant extracts, wine, and herbal supplements. Gallic acid is known for its natural antioxidant properties, which play an important role in preventing cell deterioration that can lead to various diseases. In addition, gallic acid has therapeutic potential due to its anticancer, antiinflammatory, antimicrobial, and neuroprotective properties. Accurate analysis of gallic acid in complex matrices, in mixed samples where different components coexist, is necessary to evaluate the efficacy and safety of this compound. Cobalt ferrite-zinc-dihydro caffeic acid (CFO_Zn_DHCA) nanoparticles, sphere-like in shape and 5 ± 1nm in size, were incorporated into the MIP-based electrochemical sensor design to enhance the active surface area and porosity of the glassy carbon electrode (GCE) surface. The functional monomer chosen for this study was aminophenyl boronic acid (3-APBA). In the GAL/CFO_Zn_DHCA/3-APBA@MIP-GCE sensor, which was developed using photopolymerization (PP), 3-APBA as a functional monomer was designed, and obtained in the presence of basic monomer (HEMA), cross-linker (EGDMA), and initiator (2-hydroxy-2-methyl propiophenone) by keeping it under a UV lamp at 365nm. It aims to detect GAL in real samples such as Punica granatum (pomegranate) peel, Camellia sinensis (green and black tea leaves), wine, and herbal supplements. Morphological and electrochemical characterizations of the designed GAL/CFO_Zn_DHCA/3-APBA@MIP-GCE sensor were carried out using scanning electron microscopy (SEM), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). The linear range for the determination of GAL using the indirect method (5.0mM [Fe(CN)6]-3/-4) was found to be 1.0 × 10-13M-1.0 × 10-12M, and the limit of detection (LOD) and limit of quantification (LOQ) for standard solutions werecalculated as 1.29 × 10-14 and 4.29 × 10-14M, respectively. As a result of the study, the developed MIP-based electrochemical sensor was suitable for detecting GAL with high specificity, selectivity, and sensitivity. Recovery studies were performed to determine the practical applicability of the sensor, and the results were satisfactory. This innovative sensor platform stands out as a reliable and sensitive analytical tool for determining GAL.

A readily accessible quaternized cellulose filter paper with high permeability for IgG separation

Anion-exchange chromatography (AEC) is recognized as a highly effective approach for the purification of immunoglobulin G (IgG). This study introduces an innovative strategy that employs waste cellulose filter paper in the production of AEC media. A quaternized cellulose fiber membrane (CFM-QCS) was successfully fabricated that cellulose fibers were as a structural framework, glutaraldehyde (GA) as a crosslinking agent, and quaternary chitosan (QCS) as a modifying agent. Morphological and chemical characterization revealed that GA and QCS were uniformly crosslinked on the surface of the cellulose fibers, resulting in excellent mechanical properties in both dry and wet states. Benefiting from its 3D network scaffold structure, CFM-QCS demonstrated a high adsorption capacity for bovine serum albumin (BSA), with static and dynamic adsorption capacities of 605.15 mg/g and 88.63 mg/ml, respectively. After treated with extreme conditions and 10 cyclic adsorption and elution, the adsorption capacity of CFM-QCS remains almost unchanged, highlighting its excellent stability. Additionally, a CFM-QCS packed chromatography column exhibited high flux of 10.38 L/h at 0.1 MPa, which can efficiently separate IgG from a mixed solution in the presence of BSA and IgG by gravity-driven. This work presents a straightforward approach for preparing high-performance ion-exchange chromatography membranes for IgG separation.