Morphological Analysis Research Articles

Formation of Gold Bone Nanorods shape using copper as foreign metal ion

In this study, copper (Cu) is introduced as a foreign metal ion replacing platinum by modifying the recipe of GNBPs and the final structure obtained is gold bone nanorods (GBNRs). The aspect ratio and surface density of GBNRs were investigated by varying the growth time during the growth process from 30 minutes to 5 hours. It was found that the growth solution has been changed from colourless to light blue and violet colour with increasing growth time, indicating the formation of GBNRs. The UV-Vis analysis shows two resonance plasmon peaks for t-SPR and l-SPR at 583 nm and 766 nm with the intensity of 1.433 a.u and 2.236 a.u at the optimum 5 hours growth time. For morphological analysis, it was found that the sample with lower growth time produced gold nanosphere shapes and with increasing time, more GBNRs with large aspect ratios were produced. HR-TEM characterization reveals that bone nanorods are formed due to the influence of Cu foreign metal ions, which cause selective deposition of Au atoms onto {111} facet of gold nanorods, while simultaneously reducing the overgrowth rate of the {110} facet for the edge regions and the {100} facet for the tip regions of the nanorods. In addition, the influence of Cu foreign metal ions on the growth mechanism of Au nanoseeds into nanorods and the shape transformation of nanorods into bone nanorods are also discussed in this work. In conclusion, the GBNRs have been successfully synthesized using SMGM by induced Cu as foreign metal ions.

The structure of massive star-forming galaxies from JWST and ALMA: Dusty, high-redshift disc galaxies

We present an analysis of the NIRCam and MIRI morphological and structural properties of 80 massive ($ (M_ M_ odot )$\,=\,11.2\,pm \,0.1) dusty star-forming galaxies at $, identified as sub-millimetre galaxies (SMGs) by ALMA, which have been observed as part of the PRIMER project. To compare the structure of these massive, active galaxies to more typical, less actively star-forming galaxies, we defined two comparison samples. The first of 850 field galaxies matched in specific star formation rate and redshift and the second of 80 field galaxies matched in stellar mass . From the visual classification of the SMGs, we have identified 20\,pm \,5<!PCT!> as candidate late-stage major mergers, a further 40\,pm \,10<!PCT!> as potential minor mergers, and 40\,pm \,10<!PCT!> that have comparatively undisturbed disc-like morphologies, with no obvious massive neighbours on lesssim \,20\,--\,30\,kpc (projected) scales. These rates are comparable to those for the field samples and indicate that the majority of the sub-millimetre-detected galaxies are not late-stage major mergers, but have interaction rates similar to the general field population at $z$\,sim \,2--3. Through a multi-wavelength morphological analysis, using parametric and non-parametric techniques, we establish that SMGs have comparable near-infrared, mass-normalised sizes to the less active population, $ F444W $\,=\,2.7\,pm \,0.2\,kpc versus $ F444W $\,=\,3.1\,pm \,0.1\,kpc, but exhibit lower S\'ersic indices, consistent with bulge-less discs: F444W $\,=\,1.1\,pm \,0.1, compared to F444W $\,=\,1.9\,pm \,0.1 for the less active field galaxies and $n_ F444W $\,=\,2.8\,pm \,0.2 for the most massive field galaxies . The SMGs exhibit greater single-S\'ersic fit residuals and their morphologies are more structured at 2 relative to 4 when compared to the field galaxies. This appears to be caused by significant structured dust content in the SMGs and we find evidence for dust reddening as the origin of the morphological differences by identifying a strong correlation between the F200W$-$F444W pixel colour and the 870 surface brightness using high-resolution ALMA observations. We conclude that SMGs and both massive and less massive star-forming galaxies at the same epochs share a common disc-like structure, but the weaker bulge components (and potentially lower black hole masses) of the SMGs result in their gas discs being less stable. Consequently, the combination of high gas masses and instabilities triggered either secularly or by minor external perturbations results in higher levels of activity (and dust content) in SMGs compared to typical star-forming galaxies.

Solid–liquid separation state control system for shale shaker based on computer vision

Shale shakers are crucial in drilling operations, separating solid–liquid mixtures, protecting equipment, improving efficiency, and supporting environmental protection and resource recovery. Typically, the solid–liquid separation status on shaker screens is assessed through manual inspection and experiential judgment, with the screen tilt angle adjusted manually. This method has inherent delays, failing to promptly detect and address screen surface abnormalities. To overcome this, a computer vision-driven intelligent control system has been proposed, enhancing drilling sieving operations’ efficiency. The system uses computer vision and servo motors to monitor and adjust the sieving state. Twin industrial cameras capture images, which undergo preprocessing like perspective correction, grayscale conversion, noise reduction, and illumination equalization. Local threshold segmentation and morphological analysis distinguish between liquid and solid states. The segmented images’ contours and area analysis precisely determine the separation state. Results are transmitted to motors via an industrial computer to adjust the sieve net angle. Servo motors on both sides manipulate the sliding block lifting mechanism for precise tilt adjustment. Experiments demonstrate that the method achieves an average accuracy of 93.635% in identifying mud edges. The system’s high efficiency and reliability ensure accurate identification and adjustment of the solid–liquid separation state, thereby optimizing drilling sieving workflows.

Influence of Multiple Repair Welding on Microstructure and Properties of 06Cr19Ni10 Stainless Steel

AbstractRepair welding technology is widely used in the manufacturing and maintenance of rail transit equipment to repair welding defects. However, repair welding induces modifications in joint performance, and it is necessary to study the microstructure evolution behavior to reveal the reasons. In this study, the effects of multiple repair welding on the microstructure, mechanical, and fatigue properties of 06Cr19Ni10 stainless steel samples were studied. The surface texture and fracture morphology analyses of the samples were conducted by optical microscopy (OM), scanning electron microscopy (SEM), and its equipped backscattered electron diffraction (EBSD) technique. The mechanical and fatigue properties of the samples with different repair welding times were further obtained by hardness, tensile, and fatigue tests. The results show an increase in the grain size and the substructure content in the heat-affected zone (HAZ), and the austenite orientation is changed, attributable to multiple repair welding. Multiple heat inputs result in a significant increase in hardness from 165 HV to 185 HV, a noticeable decrease in tensile strength and elongation, and an upward trend in yield strength. Under the constant stress level, the heat input of multiple repair welding causes a decrease in the fatigue life and significantly reduces toughness in the instantaneous fracture zone of the secondary repair sample.

Comparative Assessment of the Antimicrobial Efficacy of Photoactivated Disinfection Employing Distinct Photosensitizers: A Morphological Analysis Using Scanning Electron Microscopy and Confocal Laser Scanning Microscopy

Comparative Assessment of the Antimicrobial Efficacy of Photoactivated Disinfection Employing Distinct Photosensitizers: A Morphological Analysis Using Scanning Electron Microscopy and Confocal Laser Scanning Microscopy

Clinical parameters affect the structure and function of superficial pyramidal neurons in the adult human neocortex

Abstract The interplay between neuronal structure and function underpins the dynamic nature of neocortical networks. Despite extensive studies in animal models, our understanding of structure-function interrelations in the adult human brain remains incomplete. Recent methodological advances have facilitated the functional analysis of individual neurons within the human neocortex, providing a new understanding of fundamental brain processes. However, the factors contributing to patient-specific neuronal properties have not been thoroughly explored. In this observational study, we investigated the structural and functional variability of superficial pyramidal neurons in the adult human neocortex. Using whole-cell patch-clamp recordings and post hoc analyses of dendritic spine morphology in acute neocortical slice preparations from surgical resections of seven patients, we assessed age-related effects on excitatory neurotransmission, membrane properties, and dendritic spine morphologies. These results specify age as an endogenous factor that might affect the structural and functional properties of superficial pyramidal neurons.

Calonectria eucalyptorum sp. nov., a new leaf blight pathogen of Eucalyptus from India.

In this study, Calonectria eucalyptorum sp. nov. is described from the blighted leaves of Eucalyptus in Indiausing morphological and multi-locus phylogenetic analyses. The new species belongs to the Calonectria cylindrospora species complex, and its unique microscopic features and DNA sequence information enable clear separation from the12 currently accepted species in this complex. Conidia of the new taxon are slightly longer than those of its phylogenetic neighbors. Additionally, this species produces central as well as lateral stipe extensions, which is a feature not known for the other members ofthe C. cylindrospora species complex. Analyses of the combined partial calmodulin, histone, translation elongation factor-1α, and β-tubulingene regions revealed a distinct phylogenetic position for C. eucalyptorum. Recombination analysis provided additional support for the new species hypothesis. Koch's postulates for the new taxon as a foliar pathogen of Eucalyptus were fulfilled. The discovery of novel and pathogenic Calonectria species is important because it sheds light on species diversity, potential threats, and disease control.

An Optical Au3+ Sensor Based on layer-by-layer PEI/PAA-Rho thin Films on ITO.

This study presents the development of a sensitive and selective gold ion (Au3+) sensor utilizing layer-by-layer (LbL) assembled thin films composed of polyethylenimine (PEI) and poly (acrylic acid) (PAA) conjugated with rhodamine (Rho). The first study revealed that the polymeric sensors (PAA-Rho) demonstrated significant selectivity and sensitivity in their colorimetric and fluorescence responses to Au3+ compared to other metal ions. In their spirolactam form, the polymeric sensors were non-fluorescent but could selectively transform into the fluorescent ring-opened amide form upon interaction with Au3+ ions, resulting in fluorescence enhancement and observable color changes. Common co-existing metal ions showed negligible interference in the detection of Au3+. The LbL sensor exhibited a linear increase in absorbance with the addition of bilayers, confirming successful film deposition. Surface morphology analysis using SEM, along with structural confirmation via ATR-FTIR and XRD, further validated the sensor's capability to detect cation. Results demonstrated that the LbL sensor exhibited selectivity for Au3+ ions within the range 1 × 10-6 to 1 × 10-3 M. This approach offers an easily understandable and intrinsically sensitive means for detecting Au3+ ions in both environmental and biological applications.

Studies on tribological behavior of aluminum hybrid composites strengthened with MoS2 and wheat husk ash

The current study examines the dry sliding wear characteristics of a hybrid aluminum matrix composite reinforced with wheat husk ash (WHA) and molybdenum disulfide (MoS2), produced through the squeeze casting technique. Experiments were conducted utilizing Taguchi's L27 (3)13 orthogonal array, with input parameters including applied load (20, 30, 40 N), sliding speed (1, 2, 3 m/s), reinforcement percentage (wt. 2.5, 5% and 7.5%), while wear and friction coefficient were observed as measurable responses. Analysis of variance (ANOVA) results highlighted that the reinforcement percentage had the most significant impact on the wear behavior of the hybrid composite. Notably, the (Al/5WHA/5MoS2) hybrid composite exhibited superior wear resistance (129 µm), accompanied by a 27% increase in hardness compared to the parent metal. Surface morphology analysis of worn-out specimens depicted the presence of fine grooves, delamination, and cracks.

A cephalometric analysis of the antegonial notch in relation to the direction of mandibular growth.

Masticatory muscle forces influence craniofacial morphology development. The antegonial notch (Notch) is a bony concavity on the inferior border of the mandible. Considering the Notch is located anteriorly to the insertion of the masseter muscle and varies among individuals, we hypothesised that these muscles influence the formation of the Notch. Therefore, this study aimed to investigate the correlation between mandible morphology and Notch formation. Sixty Japanese patients who visited the Department of Orthodontics at our university hospital were retrospectively evaluated. Morphological and morphometric analyses of the Notch and related craniofacial parameters were conducted using lateral cephalograms taken at the patients' initial visits. Standard values for the Notch area and depth were determined, and the morphology of the Notch and mandible was analysed using Spearman's rank correlation coefficient (p < 0.05). The mean Notch area and depth was 78.71 ± 36.54 mm2 and 3.11 ± 1.09mm, respectively. The Notch area was significantly correlated with ramus inclination (p = 0.044, r = 0.261) and with the Y-axis (p = 0.039, r = 0.267). This study indicated that both the masticatory muscles and mandibular growth could contribute to the Notch formation.

Synthesis, structural characterization, thermal analysis and anticorrosion properties of novel AZO-based imidazo[1,2-a]pyridine derivatives: Experimental study and theoretical approaches

In this study, innovative AZO-based imidazo[1,2-a]pyridine derivatives were synthesized using simple and efficient synthetic approach enabling large-scale production. Thermal analysis highlights their suitability for potential applications requiring resistance to moderate temperatures. These compounds were investigated as corrosion inhibitors for MS in a 1 M HCl-medium. Corrosion inhibition studies, including weight loss, PotentioDynamic polarization and electrochemical impedance spectroscopy methods, revealed that AZOs exhibited maximum corrosion inhibition efficiencies reaching 96.13 % and 94.07 %, respectively, at a concentration of 10−3 M and a temperature of 298 K, with both compounds acting as mixed-type inhibitors. The study also delved into the influence of temperature and immersion time on inhibitory performance, revealing stable inhibition within the temperature range of 298–328 K. The calculated standard free energy of adsorption was −42.06 and −40.62 kJ/mol for AZO 1 and AZO 2, respectively, suggesting mixed-type adsorption, with adsorption behavior following the Langmuir isotherm. Morphological analysis through SEM and AFM, showed a reduction in surface roughness in the presence of the inhibitors, while water contact angle measurements indicated a significant increase in surface hydrophobicity. UV–visible and FT-IR analyses confirmed the interaction of AZOs with the MS surface, suggesting the formation of a protective layer composed of adsorbed AZO molecules. Furthermore, computational investigations employing DFT, Monte Carlo, and Molecular Dynamic simulation revealed the formation of coordinate bonds between the studied inhibitors and the metal surface, confirming adsorption on the metallic surface. These findings align well with experimental outcomes, and a possible corrosion inhibition mechanism process was discussed.

Comparative Study on Vascular Bundle Morphological Characteristics of Parts of Branches, Culms, and Rhizomes of Oligostachyum sulcatum

This study presents a comprehensive analysis of the vascular bundle morphology, tangential and radial diameters, and distribution frequency of different parts of Oligostachyum sulcatum, elucidating their structural and functional significance. Electron microscopy images revealed distinct vascular bundle characteristics in the different parts, including the vascular bundles in both parts of the rhizomes, the middle parts of the internodes, and the middle and inner parts of the branches, which were semi-open. The vascular bundles in the outer parts of both internodes and branches were semi-differentiated and undifferentiated. The vascular bundles in the inner parts of internodes were open. Statistical analysis showed significant variations in tangential and radial diameters among these parts, reflecting their diverse mechanical and physiological functions. The internodes exhibited the largest tangential and radial diameters, suggesting a critical role in mechanical support. In contrast, the branches had the smallest diameter, indicating that vascular bundle differentiation is influenced by growth conditions. The vascular bundle frequency was the highest in branches and the lowest in inside-sticks. This study provides theoretical references for the adaptive strategies and growth regulation mechanisms of O. sulcatum.

Molecular characterization of plant growth-promoting Trichoderma from Saudi Arabia.

Fungi in the genus Trichoderma are widespread in the environment, mainly in soils. They are used in agriculture because of their mycoparasitic potential; Trichoderma have the ability to increase plant health and provide protection against phytopathogens, making them desirable plant symbionts. We isolated, identified, and characterized Trichoderma from different regions of Saudi Arabia and evaluated the ability of Trichoderma to promote plant growth. Morphological and molecular characterization, along with phylogenetic studies, were utilized to differentiate between Trichoderma species isolated from soil samples in the Abha and Riyadh regions, Saudi Arabia. Then, plant growth-promoting traits of the isolated Trichoderma species were assessed. Eight Trichoderma isolates were characterized via morphological and molecular analysis; six (Trichoderma koningiopsis, Trichoderma lixii, Trichoderma koningii, Trichoderma harzianum, Trichoderma brevicompactum, and Trichoderma velutinum) were from Abha and two (T. lixii and T. harzianum) were from Riyadh. The isolated Trichoderma strains belonged to three different clades (Clade 1: Harzianum, Clade 2: Brevicompactum, and Clade 3: Viride). The Trichoderma isolates varied in plant growth-promoting traits. Seeds treated with most isolates exhibited a high percentage of germination, except seeds treated with the T3-T. koningii isolate. 100% germination was reported for seeds treated with the T4-T. harzianum and T6-T. brevicompactum isolates, while seeds treated with the T1-T. koniniopsis and T5-T. lixii isolates showed 91.1% and 90.9% germination, respectively. Seeds treated with the T8-T. velutinum, T2-T. lixii, and T7-T. harzianum isolates had germination rates of 84.1%, 82.2%, and 72.7%, respectively. The Trichoderma isolate T5-T. lixii stimulated tomato plant growth the most, followed by T7-T. harzianum, T8-T. velutinum, T4-T. harzianum, T1-T. koniniopsis, T2-T. lixii, and T6-T. brevicompactum; the least effective was T3-T. koningii. A maximum fresh weight of 669.33mg was observed for the T5-T. lixii-treated plants. The Abha region had a higher diversity of Trichoderma species than the Riyadh region, and most isolated Trichoderma spp. promoted tomato growth.

Improving supercapacitor performance with novel potato starch-PVA solid polymer electrolyte blend modified by sodium perchlorate-glycerol additives

The synthesis and analysis of Solid Polymer Electrolytes (SPEs) derived from a blend of Potato Starch and Poly Vinyl Alcohol (PS-PVA), enhanced with Sodium perchlorate salt (NaClO4) and Glycerol (GCL) are explored in this work. Our focus is on their suitability for Electrical Double-Layer Capacitor (EDLC) devices. GCL, a non-toxic substance, served as the plasticizer, and sodium perchlorate was incorporated to enhance the ionic conductivity of the SPE film. The conductivity at room temperature for pure PS-PVA blend, in the absence of salt and GCL, was found to be 4.16 × 10−8 S cm−1. Upon adding an optimized quantity of NaClO4 salt, the conductivity increased to 1.02 × 10−5 S cm−1. Subsequent plasticization of the salt-polymer blend with GCL induced NaClO4 dissociation, further augmenting the conductivity by one order of magnitude. A conductivity value of 10.35 × 10−5 S cm−1 was achieved for the film with 30 wt% GCL. Morphological, electrical, and structural analyses revealed that synthesized polymer films exhibited favorable characteristics. The suitability of these electrolytes for Electric Double-Layer Capacitors (EDLC) was studied using electrochemical characterizations and cycling tests for 2000 cycles. The findings demonstrate their potential for use in energy storage devices, showcasing excellent performance in specific capacitance, energy, and power densities.

Evaluation of Praziquantel effectiveness in treating Nile tilapia clinostomid infections and its relationships to fish health and water quality

This study aimed to conduct a multidisciplinary investigation integrating detailed morphology, molecular characterization, water parameters, histopathology alteration, and the trials of treatment of Clinostomum spp. In this study, 300 Nile tilapia (Oreochromis niloticus) were collected from the farmed and wild Nile River at Al Bahr Al Aazam, Giza Governorate to assess Clinostomid infection prevalence. Fish and water samples were collected from private fish farms, and water drains at Dakahlia, and Giza, Egypt. Analysis of the water revealed inadequate water quality, particularly in the fish farms. Snails and piscivorous birds were abundant at fish collection sites. The recovered Clinostomid MCs morphological characteristics and COI gene sequence analysis identified them as Clinostomum complanatum, C. phalacrocoracis, and Euclinostomum heterostomum. Clinostomid MCs disturbed the fish’s hematological and biochemical blood parameters. Bath treatment of parasitized fish with praziquantel (2 mg/L for 24 h) revealed a significant reduction in the number of vital MCs vs. infected fish (non-treated). Praziquantel (PZQ) is an effective and safe therapy for controlling Clinostomid infections affecting farmed Nile tilapia. The current findings indicate a link between poor environmental conditions and Clinostomum infections in tilapia. The study highlights the impacts of Clinostomid MCs on fish health and recommends bath treatment with PZQ as an efficient control method for these dangerous parasites to protect human and fish health.

7769 Natural plant extract alleviates high-fat diet-induced obesity through enhancing PLIN5 expression

Abstract Disclosure: S. Shin: None. H. Jang: None. E. Kwon: None. Obesity is one of the metabolic diseases caused by excessive differentiation and excessive accumulation of adipose tissue due to an imbalance between energy intake and consumption. Various drugs have been developed to effectively treat obesity, but the side effects often outweigh the benefits. Therefore, alternative weight loss supplements that can minimize side effects are needed. In this study, the effects of natural plant extract (NPE) on the high-fat diet (HFD)-induced obesity mice were confirmed to discover new anti-obesity material.After acclimating C57BL/6J mice for 1 week, they were divided into two groups: a normal diet (ND) group and an HFD group. After inducing obesity over 4 weeks, the HFD group was divided into HFD and HFD+NPE and reared together with the ND group for an additional 10 weeks. After a 12-hour fasting period, observations were made on weight, adipose tissue mass, morphological changes in adipocytes, and the expression differences in genes and proteins related to fatty acid oxidation (FAO) in the epididymal white adipose tissue, particularly focusing on the PLIN5 protein.The increase in body weight and epididymal fat mass induced by the HFD was reduced by the administration of NPE. Morphological analysis of the epididymal fat revealed a significant increase in adipocyte size in the HFD group, whereas the NPE group showed a reduction in adipocyte size. The expression of FAO-related genes (PPARa, PGC1a, CPT1, and CPT2) and TCA cycle-related genes (PDHb, ACO, DIST, SUCLG, SDHC, and MDH2) decreased in the epididymal fat due to the HFD, but significantly increased with the administration of NPE. The NPE induced the breakdown of intracellular stored triglycerides by upregulating ATGL, LIPE, and MGL mRNA expression. The resulting liberated fatty acids were translocated to the mitochondria and oxidized through the TCA cycle, ultimately leading to a reduction in body fat. Furthermore, PLIN5 expression exhibited a significantly higher level in the NPE group compared to the other two groups. In other words, elevation in PLIN5 expression, induced by the NPE, appears to enhance lipid breakdown, activate FAO pathways, and stimulate the TCA cycle. Consequently, lipid combustion is increased, improving the weight gain and fat accumulation induced by the HFD.If additional experimental results on human application align with the above findings, NPE holds the potential as a low-side-effect ingredient for weight loss supplements. Presentation: 6/1/2024

Plant cell wall enzymatic deconstruction: Bridging the gap between micro and nano scales

Understanding lignocellulosic biomass resistance to enzymatic deconstruction is crucial for its sustainable conversion into bioproducts. Despite scientific advances, quantitative morphological analysis of plant deconstruction at cell and tissue scales remains under-explored. In this study, an original pipeline is devised, involving four-dimensional (space + time) fluorescence confocal imaging, and a novel computational tool, to track and quantify deconstruction at cell and tissue scales. By applying this pipeline to poplar wood, dynamics of cellular parameters was computed and cellulose conversion during enzymatic deconstruction was measured. Results showed that enzymatic deconstruction predominantly impacts cell wall volume rather than surface area. Additionally, a negative correlation was observed between pre-hydrolysis compactness measures and volumetric cell wall deconstruction rate, whose strength was modulated by enzymatic activity. Results also revealed a strong positive correlation between average volumetric cell wall deconstruction rate and cellulose conversion rate. These findings link key deconstruction parameters across nano and micro scales.

The evolution and toughening mechanism of austenite in high Co–Ni ultrahigh strength steel

The austenite, as a “soft” phase, has a significant impact on the mechanical properties in ultrahigh strength steel. The morphology, size, and distribution of austenite play a critical role in toughness of steel. This study concentrates on morphology, size, and distribution of austenite subjected to solid solution, cryogenic, and aging treatments and explores its evolution characterized by transmission electron microscopy, scanning electron microscopy, electron backscatter diffraction and x-ray diffraction. The toughening mechanism of austenite with different characterization was investigated through charpy impact testing and fracture morphology analysis. The results indicate that filmy and blocky austenite existed at the lath boundary of martensite. Blocky austenite and some filmy austenite were eliminated after cryogenic treatment, while approximately less than 15 nm filmy reverted austenite was formed after aging treatment. Filmy reverted austenite at the boundary of martensite laths can enhance toughness. Retained austenite without cryogenic treatment can induce the formation of larger blocky austenite, which decreased toughness.

Streamlined chemical fixation method for morphological investigation of Candida albicans with scanning electron microscopy

This method describes the preparation of Candida albicans specimen for scanning electron microscopy (SEM), starting from specimen collection to obtaining SEM images. Our approach involves preserving cellular structure and preventing cell degradation through chemical fixation and post-fixation without Osmium tetroxide (OsO4), followed by air dried specimen placed onto Si substrate. Additionally, the method outlines the steps for mounting the prepared specimen onto SEM sample holder aluminum stubs, followed by coating with an ultrathin gold layer via thermal evaporation to enhance specimen/substrate/stub conductivity. The specimens are then mounted in the SEM sample holder. This step-by-step procedure demonstrates successful morphological analysis of C. albicans, providing a comprehensive and effective specimen preparation for SEM analysis.•Effective preparation of Candida albicans specimens for SEM analysis, preserving cellular structure.•Step-by-step specimen mounting and gold coating for enhanced detailed SEM imaging.•Chemical fixation of yeast cells for electron microscopy visualization.

Antiproliferative Effects of Methanolic Fruit Extract of Solanum xenthocarpum (L.) on Human Breast Cancer Cells.

Solanum xanthocarpum, a perennial herb native to India, contains steroidal glycoalkaloids with notable anticancer properties. This study investigated the antioxidant and antiproliferative effects ofmethanolic fruit extract of S. xanthocarpum on human breast cancer cells (MDA-MB-231). Phytochemical screening and LC-HRMS analysis confirmedpresence of various primary and secondary metabolites. Antioxidant activity was assessed through DPPH, ABTS radical scavenging, reducing power, and phosphomolybdate assays. The extract demonstrated significant antioxidant potential with EC50 values of 60.10 ± 0.88 µg/mL (DPPH) and 392.29 ± 3.93 µg/mL (ABTS). Cytotoxicity against MDA-MB-231 cells was evaluated via morphological analysis, MTT assays, and IC50 determination (24.19 ± 0.56 µg/L). Apoptosis was confirmed using dual staining techniques (AO/EB, Hoechst 33342/PI, DAPI), revealing condensed nuclei, apoptotic bodies, and reduced mitochondrial membrane potential, as indicated by Rhodamine staining. Additionally, increased reactive oxygen species (ROS) levels were observed using H2-DCF-DA staining. The total phenolic and flavonoid contents of the extract were 127.78 ± 3.547 mg GAE/g and 98.06 ± 4.289 mg QE/g, respectively. These findings suggest that the methanolic fruit extract of S. xanthocarpum possesses strong antioxidant and anticancer activities, indicating its potential role in cancer treatment. Further studies are warranted to explore its bioactive compounds for developing novel anticancer therapies.