Monolayer Packing Research Articles

Comparative Characterization of Lateral Organization and Packing Properties of Lipids in Pulmonary Surfactant Membranes and Interfacial Films

The main function of the lipid-protein complex pulmonary surfactant is to stabilize the respiratory surface by formation of a surface active interfacial film on top of the thin aqueous layer that covers the alveoli. From synthesis in the pulmonary epithelium, until formation of the functional film, surfactant complexes adopt different lamellar structures during its storage and secretion. The functional structure of surfactant makes Langmuir monolayers especially useful for the analysis of structure-function correlations in the pulmonary surfactant system, although they are also widely used as a model to obtain structural information about biological membranes. However, the exact correspondence between lateral organization and molecular packing in bilayers and monolayers is still a matter of controversy.The fluorescent probe laurdan (6-dodecanoyl-2-dimethylaminonaphthalene) is a lipophilic dye used to analyze the structure of membranes due to its spectral characteristics. Once inserted in membranes, the fluorescence emission of laurdan is very sensitive to the level of hydration of the phospholipid headgroups. Changes in packing or lateral organization of the membrane produce a shift of the emission maximum of the label from 440 nm in ordered membranes to 490 nm in disordered membrane phases. Taking advantage of the properties of this probe, films from pulmonary surfactant lipids containing laurdan were prepared and compressed to obtain surface pressure-area isotherms. Surface pressure and area occupied per molecule along compression were obtained in parallel with the generalized polarization function (GPF) of laurdan -as calculated from its interfacial fluorescence emission spectra- and compared with the fluorescence of laurdan in multilamellar suspensions of the same surfactant lipids at different temperatures.

Adsorption of 4-Mercaptopyridine on Au(111): A Periodic DFT Study

We have studied the adsorption of 4-mercaptopyridine (Mpy) on Au(111) using periodic density functional theory calculations. Isolated Mpy molecules adsorb preferentially at near-bridge sites in a tilted configuration. The interaction with water influences the adsorption of Mpy only weakly whereas the binding of ions to Mpy can lead to substantial structural changes in the Mpy adsorption geometry. At higher coverages, the molecules become more upright in order to allow for a denser packing in the self-assembled monolayers (SAMs). Simulated STM images of the 7 x mean square root of 3 and 5 x mean square root of 3 structures compare favorably with experimental results. Using an ab initio thermodynamics approach, we determined the most stable molecular structure as a function of the chemical potential of mercaptopyridine. The stability of the 7 x mean square root of 3 structure is confirmed, but the experimentally observed 5 x mean square root of 13 structure does not appear to be a thermodynamically stable structure. Several possible reasons for the discrepancy between theory and experiment are discussed.

Langmuir films of nitro substituted N-benzylidene hexadecylamine Schiff bases at air/water interface—Phase transitions and molecular dynamics simulation

Formation and packing of Langmuir monolayers of ortho, meta and para substituted N-benzylidene hexadecylamine have been studied using surface pressure–molecular area ( π– A) isotherms over a wide range of temperatures. A cusp with a plateau in the isotherms shows a first-order phase transition between the liquid expanded (LE) and liquid condensed (LC) phase in all the three compounds at air/water interface. Reflection spectra of the Langmuir monolayers in the LC phase and absorbance spectra of the corresponding Langmuir–Blodgett films (LB films) show fairly ordered films. In the ortho derivative the intramolecular H-bonding seems to compete with intermolecular H-bonding leading to a lesser hydration-induced repulsive interactions between the head groups thereby inducing better packing. The changes in enthalpy (Δ H) was used to understand the nature of the packing of the molecules in the LE–LC phase. Molecular dynamics simulation carried out on the three amphiphiles on water using amorphous cells showed that the compound with the –nitro group in the ortho position shows the highest interaction energy suggesting reduced hydration. This correlates well with the ordering in the different Langmuir films.

Odd−Even Effect in Molecular Packing of Biphenyl-Substituted Alkaneselenolate Self-Assembled Monolayers on Au(111): Scanning Tunneling Microscopy Study

Self-assembled monolayers (SAMs) of hybrid ω-(4′-methylbiphenyl-4-yl) alkaneselenolates CH3(C6H4)2(CH2)nSe (BPnSe, n = 2−6) on Au(111) substrates, prepared at room temperature, were studied using scanning tunneling microscopy. Molecularly resolved images reveal that all BPnSe species form well-ordered SAMs on Au(111), with rotational domains having typically a size of ca. 30−80 nm, which is about 5 times larger than their thiol analogues prepared at the same conditions. Two types of structures are alternatingly adopted depending on the parity of the number of the methylene units in the aliphatic linker of the BPnSe molecules. The unit cell of BPnSe SAMs with n = odd can be described as close to a commensurate oblique (2√3 × √3)R30° structure with two molecules per unit cell. The molecular arrangement in BPnSe SAMs with n = even can be described by anisotropic expansion of the above structure along its shorter unit cell vector. This expansion is, however, irregular so that the respective unit vector in thi...

Infrared Reflection Absorption Spectroscopy Coupled with Brewster Angle Microscopy for Studying Interactions of Amphiphilic Triblock Copolymers with Phospholipid Monolayers

Novel water-soluble amphiphilic triblock copolymers poly(glycerol monomethacrylate)-b-poly(propylene oxide)-b-poly(glycerol monomethacrylate) (PGMA-b-PPO-b-PGMA) were synthesized because of their expected enhanced ability to interact with biological membranes compared to the well-known poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) (PEO-b-PPO-b-PEO) block copolymers. Their bulkier hydrophilic PGMA blocks might induce a disturbance in the packing of liquid-crystalline lipid bilayers in addition to the effect caused by the hydrophobic PPO block alone. To gain a better insight into the polymer-membrane interactions at the molecular level, the adsorption kinetics and concomitant interactions of (PGMA14)(2-)PPO(34) with model membranes of dipalmitoylphosphatidylcholine (DPPC) and dimyristoylphosphatidylcholine (DMPC) were monitored using infrared reflection absorption spectroscopy (IRRAS) coupled with Brewster angle microscopy (BAM) and surface pressure (pi) measurements. The maximum penetration surface pressure of ca. 39 mN/m suggests that (PGMA14)(2-)PPO(34) is able to insert into lipid monolayers even above the so-called monolayer-bilayer equivalent pressure of 30-35 mN/m. Copolymer adsorption to a liquid-expanded DPPC-d62 monolayer proceeds in a two-step mechanism: (i) initially only the more hydrophobic PPO middle block penetrates the lipid monolayer; (ii) following the liquid-expanded-liquid-condensed (LE-LC) phase transition, the bulky PGMA hydrophilic blocks are dragged into the headgroup region as the PPO block inserts further into the fatty acid region. The adsorption kinetics is considerably faster for DMPC-d54 monolayers due to their higher fluidity. Copolymer adsorption to an LC-DPPC-d62 monolayer leads to a change in the monolayer packing by forcing the lipid alkyl chains into a more vertical orientation, their tilt angle with respect to the surface normal being reduced from initially 30 degrees +/- 3 degrees to 18 degrees +/- 3 degrees. BAM images rule out macroscopic phase separation and show that coalescence of DPPC-d62 LC domains takes place at relatively low surface pressures of pi > or = 23 mN/m, suggesting that (PGMA14)(2-)PPO (34) partitions into both LE as well as LC domains.

Thin Film Structure of Tetraceno[2,3-b]thiophene Characterized by Grazing Incidence X-ray Scattering and Near-Edge X-ray Absorption Fine Structure Analysis

Understanding the structure-property relationship for organic semiconductors is crucial in rational molecular design and organic thin film process control. Charge carrier transport in organic field-effect transistors predominantly occurs in a few semiconductor layers close to the interface in contact with the dielectric layer, and the transport properties depend sensitively on the precise molecular packing. Therefore, a better understanding of the impact of molecular packing and thin film morphology in the first few monolayers above the dielectric layer on charge transport is needed to improve the transistor performance. In this Article, we show that the detailed molecular packing in thin organic semiconductor films can be solved through a combination of grazing incidence X-ray diffraction (GIXD), near-edge X-ray absorption spectra fine structure (NEXAFS) spectroscopy, energy minimization packing calculations, and structure refinement of the diffraction data. We solve the thin film structure for 2 and 20 nm thick films of tetraceno[2,3-b]thiophene and detect only a single phase for these thicknesses. The GIXD yields accurate unit cell dimensions, while the precise molecular arrangement in the unit cell was found from the energy minimization and structure refinement; the NEXAFS yields a consistent molecular tilt. For the 20 nm film, the unit cell is triclinic with a = 5.96 A, b = 7.71 A, c = 15.16 A, alpha = 97.30 degrees, beta = 95.63 degrees, gamma = 90 degrees; there are two molecules per unit cell with herringbone packing (49-59 degree angle) and tilted about 7 degrees from the substrate normal. The thin film structure is significantly different from the bulk single-crystal structure, indicating the importance of characterizing thin film to correlate with thin film device performance. The results are compared to the corresponding data for the chemically similar and widely used pentacene. Possible effects of the observed thin film structure and morphology on charge carrier mobility are discussed.

Short-Chain Alcohols Promote Accelerated Membrane Distention in a Dynamic Liposome Model of Exocytosis

We have used amperometric measurements in a model system consisting of two liposomes connected with a membrane nanotube to monitor catechol release during artificial exocytosis and thereby to elucidate the effect of small-chain alcohols on this dynamic membrane process. To determine the rate of membrane shape change, catechol release during membrane distention was monitored amperometrically, and the presence of alcohols in the buffer was shown to accelerate the membrane distention process in a concentration-dependent manner. Compression isotherms for the same lipid composition in the absence and presence of ethanol and 1-propanol were measured to determine how these short-chain alcohols affect the lipid packing in monolayers. The isotherms show a marked decrease in lipid packing density that is dependent on the particular alcohol and its concentration. Comparison of the electrochemical and isotherm results suggests a correlation between decreasing lipid packing density and increasing rates of membrane shape change.

The psychotropic drug olanzapine (Zyprexa®) increases the area of acid glycerophospholipid monolayers

The typical antipsychotics chlorpromazine (CPZ) and trifluoperazine (TFP) increase the mean molecular area (mma) of acidic, but not neutral, glycerophospholipids in monolayers at pH 7.36 measured by the Langmuir technique. The atypical antipsychotic olanzapine (OLP 1 1 The uncharged and positively charged forms of OLP are designated OLP 0 and OLP +, respectively. ) is structurally similar to TFP. We have therefore studied the effects of OLP on glycerophospholipid monolayers and in comparison with CPZ. Olanzapine (10 µM, in subphase, pH 7.36) influenced the isotherms (surface pressure versus mma) in monolayers of the neutral dipalmitoyl phosphatidylcholine (DPPC) and the acidic dipalmitoyl phosphatidylserine (DPPS) or 1-palmitoyl-2-oleoylphosphatidylserine (POPS) in the increasing order of mma: DPPS < DPPC < POPS at both lower and higher temperature. Thus, presence of an unsaturated acyl in PS increased the drug-induced effect on mma. The mma in the absence of drugs was lower at lower temperatures than at higher temperatures. OLP affected mma to a greater extent than CPZ, and caused the greatest interaction at surface pressure of 30 mN/m at higher temperatures. In contrast, CPZ gave the largest effect in the monolayers at surface pressure 30 mN/m at lower temperatures. CPZ did not alter the isotherms of DPPC, at lower or higher temperature, and only affected the packing of the DPPS and POPS monolayers. In contrast, OLP altered the isotherms of DPPC. It is suggested that the drugs affect the monolayer packing by intercalating between the glycerophospholipid molecules. Since CPZ has major side effects, while OLP has few, this may indicate that there is poor correlation between side effects and effects of the drugs on phospholipid monolayers.

Nanoscale surface chemistry in self- and directed-assembly of organic molecules on solid surfaces and synthesis of nanostructured organic architectures

Abstract This article briefly reviews the interplay of weak noncovalent interactions involved in the formation of self-assembled monolayers of organic molecules and the strong chemical binding in directed-assembly of organic molecules on solid surfaces. For a self-assembled monolayer, each molecule involves at least three categories of weak interactions, including molecule-substrate interactions, molecule-molecule interactions in a lamella, and molecule-molecule interactions between two adjacent lamellae. Basically, molecule-substrate interactions play a major role in determining molecular configuration. Molecule-molecule interactions, particularly the interactions of molecular ending functional groups between two adjacent lamellae, such as hydrogen bonds, play a dominant role in determining the molecular packing pattern in a monolayer. These weak interactions may induce or influence molecular chirality. This understanding at the atomic scale allows us to design 2D nanostructured organic materials via precisely manipulating these weak noncovalent interactions. Compared to the self-assembled monolayer formed via weak noncovalent interactions, the structure of directed-assembled monolayer/multilayers formed through strong chemical bonds is significantly dependent on the geometric arrangement and reactivity of active sites on the solid surface. In contrast to the significant role of weak intermolecular interactions in determining molecular packing in a self-assembled monolayer, strong chemical binding between molecules and reactive sites of a substrate plays a major role in determining the molecular packing pattern in a directed-assembly monolayer. Controllable chemical attachment between organic functional groups and reactive sites of the solid surface is crucial for the formation of a highly oriented organic monolayer and the following multilayer.

Packing Density of Glycolipid Biosurfactant Monolayers Give a Significant Effect on Their Binding Affinity Toward Immunoglobulin G

Mannosylerythritol lipid-A (MEL-A) is one of the most promising glycolipid biosurfactants, and abundantly produced by Pseudozyma yeasts. MEL-A gives not only excellent self-assembling properties but also a high binding affinity toward human immunoglobulin G (HIgG). In this study, three kinds of MEL-A were prepared from methyl myristate [MEL-A (m)], olive oil [MEL-A (o)], and soybean oil [MEL-A (s)], and the effect of interfacial properties of each MEL-A monolayer on the binding affinity toward HIgG was investigated using surface plasmon resonance (SPR) and the measurement of surface pressure (pi)-area (A) isotherms. Based on GC-MS analysis, the main fatty acids were C(8) and C(10) acids in all MEL-A, and the content of unsaturated fatty acids was 0% for MEL-A (m), 9.1% for MEL-A (o), 46.3% for MEL-A (s), respectively. Interestingly, the acid content significantly influenced on their binding affinity, and the monolayer of MEL-A (o) gave a higher binding affinity than that of MEL-A (m) and MEL-A (s). Moreover, the mixed MEL-A (o)/ MEL-A (s) monolayer prepared from 1/1 molar ratio, which comprised of 27.8% of unsaturated fatty acids, indicated the highest binding affinity. At the air/water interface, MEL-A (o) monolayer exhibited a phase transition at 13 degrees C from a liquid condensed monolayer to a liquid expanded monolayer, and the area per molecule significantly expanded above 13 degrees C, while the amount of HIgG bound to the liquid expanded monolayer was much higher than that bound to liquid condensed monolayer. The binding affinity of MEL-A toward HIgG is thus likely to closely relate to the monolayer packing density, and may be partly controlled by temperature.

Investigation of the Protonation State of Novel Cationic Lipids Designed for Gene Transfection

In order to be used in versatile DNA delivery systems, novel cationic lipids were synthesized. The head groups of the new compounds represented by monoamines or oligoamines can be charged or uncharged depending on the environmental pH. Since their pK values are unknown, the protonation properties of these lipids have been studied in a wide pH range. In our experiments, the amphiphilic molecules were organized as a Langmuir monolayer at the air-water interface. Total reflection X-ray fluorescence (TRXF) was used to determine the 2D concentration of bromide counterions bound to a positively charged (protonated) Langmuir monolayer. The protonation rate of the novel cationic lipids was estimated by comparing the fluorescence intensity with that of dioctadecyldimethylammonium bromide monolayers as a reference. TRXF investigations were supplemented with results of film-balance measurements, grazing incidence X-ray diffraction, and X-ray reflectivity data. The results obtained display that the monolayers of all studied compounds are completely uncharged at pH values above 10. In the investigated pH region, the highest protonation rate of the monolayers is observed at pH 3. The influence of the monolayer packing density on the protonation properties is clearly shown.

Study of the Interaction of Human Defensins with Cell Membrane Models: Relationships between Structure and Biological Activity

The HNP-1, HNP-2, and HNP-3 defensins are human antimicrobial peptides produced in response to microbial invasion. Their properties are distinct, with a more potent action for HNP-3. In this study, the relationship between their structural dissimilarities and their different microbial actions was evaluated by molecular dynamics simulation. Structural determinants related to their intra- and intermolecular interactions were defined for each HNP using a simplified membrane model consisting of a water/n-hexane interface. The hydrophobic portion of the HNPs promotes their diffusion to the interface with a concomitant, slight change in the structure induced by the intermolecular electrostatic interactions between the HPN molecules and the interface. As a consequence, different orientations are probably adopted by the HNPs at the interface, which may explain their different actions. The interaction of HNP-1 and HNP-2 with the surfaces was also studied using Langmuir monolayers as a biomimetic system. It was found that peptides adsorb rapidly at n-hexane/water interfaces as well as at phospholipid Langmuir monolayers but not at the air/liquid interface. This reveals that the presence of an organic phase is required for the exposure of the hydrophobic groups of the peptides. In addition, adsorption kinetics and surface pressure-area isotherms for Langmuir monolayers suggested that the lipid-peptide interaction is strongly influenced by the monolayer electrical charge and packing, depending also on the HPN structure. This study supports a model in which defensins, acting in a dimeric form, are able to disrupt membranes. The model also shows that the individual structures of the HNPs are responsible for their different actions on microbes.

Nanoparticle-Induced Packing Transition in Mesostructured Block Dendron−Silica Hybrids

Silica type nanostructured hybrid materials have been prepared by co-assembly of sol-gel materials and an extended amphiphilic dendron consisting of a hydrophilic aliphatic polyether block and hydrophobic docosyl chains. As confirmed by small- and wide-angle X-ray scattering (SAXS and WAXS) experiments, the hybrid preparation method employing simple solvent evaporation resulted in macroscopically oriented lamellar structures in which the docosyl groups crystallize normal to the lamellar plane. Contrary to a bilayer lamellar crystalline structure in the parent extended dendron, the hybrids show lamellar crystalline morphologies with an interdigitated monolayer packing of hydrophobic docosyl groups. This unusual structural transformation upon adding sol nanoparticles can be explained by alleviating an interfacial steric barrier for hydrophilic linear polyethers.

Balance of Structure−Building Forces in Selenium-Based Self-Assembled Monolayers

Using a model system of 4,4‘-biphenyl-substituted alkaneselenols on (111) gold and silver substrates, we show that the hybridization and, thus, spatial orientation of the binding orbitals of selenium is a determining factor for the molecular packing and structure of alkaneselenolate self-assembled monolayers (SAMs). Considering that a similar effect has been previously observed for the sulfur headgroup in alkanethiolate SAMs, its generality for different SAM systems can be assumed.

Chemical Grafting of Biphenyl Self-Assembled Monolayers on Ultrananocrystalline Diamond

We have investigated the formation of self-assembled monolayers (SAMs) of 4'-nitro-1,1-biphenyl-4-diazonium tetrafluoroborate (NBD) onto ultrananocrystalline diamond (UNCD) thin films. In contrast to the common approach to modify diamond and diamond-like substrates by electrografting, the SAM was formed from the saturated solution of NBD in acetonitrile by pure chemical grafting. Atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), cyclic voltammetry (CV), and near edge X-ray absorption fine structure spectroscopy (NEXAFS) have been used to verify the direct covalent attachment of the 4'-nitro-1,1-biphenyl (NB) SAM on the diamond substrate via stable C-C bonds and to estimate the monolayer packing density. The results confirm the presence of a very stable, homogeneous and dense monolayer. Additionally, the terminal nitro group of the NB SAM can be readily converted into an amino group by X-ray irradiation as well as electrochemistry. This opens the possibility of in situ electrochemical modification as well as the creation of chemical patterns (chemical lithography) in the SAM on UNCD substrates and enables a variety of consecutive chemical functionalization for sensing and molecular electronics applications.

Loosely Packed Hydroxyl-Terminated SAMs on Gold

We report the preparation of loosely packed hydroxyl-terminated self-assembled monolayers (SAMs) on gold by the adsorption of bis(11,11'-dithioundecyl)perfluoroheptanoate and base-mediated cleavage of the fluorocarbon terminal group. As shown through complementary characterization methods, the partially fluorinated SAM exhibits a structure in which the outer surface contains mostly -CF(3) groups, the fluorocarbon groups are slightly canted on average, and the hydrocarbon chains underneath are in a fluidlike state. Upon cleavage of the fluorocarbon group, the hydroxyl-terminated alkyl chains relax into an increasingly canted, fluidlike state. The resulting monolayer packing exposes both methylene and hydroxyl functionalities, yielding an intermediate surface energy (theta(a)(H(2)O) approximately 68 degrees ). As compared to a densely packed hydroxyl-terminated SAM prepared from bis(11-hydroxyundecyl)disulfide, the cleaved films are thinner because of the greater average chain cant and exhibit a approximately 50% higher capacitance and a factor of 5 lower charge-transfer resistance. The addition of THF to the electrolyte solution as a cosolvent intercalates into the loosely packed SAM to double the charge-transfer resistance and increase the capacitance by approximately 20% but does not affect the capacitance of the densely packed SAM. The loosely packed SAM is also more easily exchanged upon exposure to a solution of n-docosanethiol.

Two-Dimensional Structure Control by Molecular Width Variation with Metal Coordination

The self-assembled monolayer of bipyridine derivative 1, which has two alkyl chains on each end, at the HOPG/1-phenyloctane interface was studied by in situ scanning tunneling microscopy (STM). The detailed mechanism of a spontaneous change in the monolayer packing pattern by Pd coordination was studied. Uncomplexed 1 existed in a bent form in the monolayer, and the alkyl chains were interdigitated, whereas Pd-complexed 1 was in a straight form and the alkyl chains were not interdigitated. An intermediate state of 1 was successfully observed during metal coordination. The structure was the bent form with noninterdigitated alkyl chains. Equilibrium intermolecular distances reported from ab initio calculations indicate that the molecular width of the central aromatic part of uncomplexed 1 (7.5 A) is substantially smaller than that of the peripheral alkyl chain part (9.2 A). The bent form was suitable for covering up the surface to maximize the packing density. However, the molecular width of the aromatic unit of Pd-complexed 1 (9.1 A) was almost identical to that of the alkyl chain unit (9.2 A). Therefore, Pd-complexed 1 took the straight form in the monolayer. The observation of surface coverage by STM suggests that the bent form increases the packing density by as much as 16% compared with that of the straight form. These results indicate that the control of molecular width can be used to design molecular templates for nanostructure formation.

Possible performance improvement in [2]catenane molecular electronic switches

Mechanically interlocked bistable supramolecular complexes are promising candidates of molecular electronics. Applying a multiscale computational approach, here we study the coherent charge transport properties of catenane monolayers sandwiched between Cu(111) electrodes. We demonstrate the robust nature of electrical switching behavior with respect to the variations in the monolayer packing density and the type of electrodes, as well as the thermal fluctuations of the molecules. We propose that the asymmetry of molecule-electrode barriers can be utilized to improve the switching ratio.

Semifluorinated Chains at the Air/Water Interface: Studies of the Interaction of a Semifluorinated Alkane with Fluorinated Alcohols in Mixed Langmuir Monolayers

Mixtures of a semifluorinated alkane 1,1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10-henicosafluorotriacontane (abbr. F10H20) and different alcohols were investigated at the air/water interface using surface pressure-area isotherms complemented with BAM images. In our studies, octadecanol and its fluorinated derivatives differing in the degree of fluorination were researched. To verify the influence of an iso branching of the fluorinated segment in an alcohol molecule, the properties of perfluorooctyldecanol and perfluoro-iso-nonyldecanol in mixtures with F10H20 were compared. From the isotherms datapoints, the excess of free energy of mixing (DeltaG(exc)) together with the interaction parameter (alpha) were calculated. On the basis of the additivity rule and BAM images, phase diagrams for all of the investigated systems were constructed. It occurs that F10H20 mixes with the fully hydrogenated alcohol, octadecanol, within the whole range of alcohol mole fractions, whereas it is completely immiscible with its perfluorinated analogue. Regarding the mixtures of F10H20 with semifluorinated alcohols, it turned out that these systems exhibit limited miscibility, i.e., are miscible at a low semifluorinated alcohol proportion, whereas upon increasing alcohol content, the systems start to demix. It may be concluded that the molecular packing in mixed monolayers is the key factor determining the miscibility of F10H20 of the investigated alcohols.

Adsorption in Slit Pores and Pore-Size Distribution: A Molecular Layer Structure

Anew approach is developed to analyze the thermodynamic properties of a sub-critical fluid adsorbed in a slit pore of activated carbon. The approach is based on a representation that an adsorbed fluid forms an ordered structure close to a smoothed solid surface. This ordered structure is modelled as a collection of parallel molecular layers. Such a structure allows us to express the Helmholtz free energy of a molecular layer as the sum of the intrinsic Helmholtz free energy specific to that layer and the potential energy of interaction of that layer with all other layers and the solid surface. The intrinsic Helmholtz free energy of a molecular layer is a function (at given temperature) of its two-dimensional density and it can be readily obtained from bulk-phase properties, while the interlayer potential energy interaction is determined by using the 10–4 Lennard-Jones potential. The positions of all layers close to the graphite surface or in a slit pore are considered to correspond to the minimum of the potential energy of the system. This model has led to accurate predictions of nitrogen and argon adsorption on carbon black at their normal boiling points. In the case of adsorption in slit pores, local isotherms are determined from the minimization of the grand potential. The model provides a reasonable description of the 0–1 monolayer transition, phase transition and packing effect. The adsorption of nitrogen at 77.35 K and argon at 87.29 K on activated carbons is analyzed to illustrate the potential of this theory, and the derived pore-size distribution is compared favourably with that obtained by the Density Functional Theory (DFT). The model is less time-consuming than methods such as the DFT and Monte-Carlo simulation, and most importantly it can be readily extended to the adsorption of mixtures and capillary condensation phenomena.