Molecular Self-assembly Behavior Research Articles

Synthesis, Optimization and Molecular Self-Assembly Behavior of Alginate-g-Oleylamine Derivatives Based on Ugi Reaction for Hydrophobic Drug Delivery

To achieve the optimal alginate-based oral formulation for delivery of hydrophobic drugs, on the basis of previous research, we further optimized the synthesis process parameters of alginate-g-oleylamine derivatives (Ugi-FOlT) and explored the effects of different degrees of substitution (DSs) on the molecular self-assembly properties of Ugi-FOlT, as well as the in vitro cytotoxicity and drug release behavior of Ugi-FOlT. The resultant Ugi-FOlT exhibited good amphiphilic properties with the critical micelle concentration (CMC) ranging from 0.043 mg/mL to 0.091 mg/mL, which decreased with the increase in the DS of Ugi-FOlT. Furthermore, Ugi-FOlT was able to self-assemble into spherical micellar aggregates in aqueous solution, whose sizes and zeta potentials with various DSs measured by dynamic light scattering (DLS) were in the range of 653 ± 25~710 ± 40 nm and −58.2 ± 1.92~−48.9 ± 2.86 mV, respectively. In addition, RAW 264.7 macrophages were used for MTT assay to evaluate the in vitro cytotoxicity of Ugi-FOlT in the range of 100~500 μg/mL, and the results indicated good cytocompatibility for Ugi-FOlT. Ugi-FOlT micellar aggregates with favorable stability also showed a certain sustained and pH-responsive release behavior for the hydrophobic drug ibuprofen (IBU). Meanwhile, it is feasible to control the drug release rate by regulating the DS of Ugi-FOlT. The influence of different DSs on the properties of Ugi-FOlT is helpful to fully understand the relationship between the micromolecular structure of Ugi-FOlT and its macroscopic properties.

Halide-modulated self-assembly of metal-free perovskite single crystals for bio-friendly X-ray detection

Halide-modulated self-assembly of metal-free perovskite single crystals for bio-friendly X-ray detection

Backbone regulation of a bithiazole-based wide bandgap polymer donor by introducing thiophene bridges towards efficient polymer solar cells

Abstract Miscibility and morphology of the active layers have significant influence on the photovoltaic performance of polymer solar cells (PSCs). Chemical strategies, especially molecular structure design, have been proven to be crucial for polymer donor materials. In this work, two wide bandgap D-A copolymer donors composed of tripropylsilyl substituted bithienyl-benzodithiophene as donor (D) unit and dialkyl substituted bithiazole as acceptor (A) unit were designed and synthesized. By introducing thiophene π-bridges into the backbone, the miscibility and morphological properties of the materials are effectively tuned, leading to tremendous progress in power conversion efficiency from 0.95% to 10.73% with m-ITIC as the acceptor. The results demonstrate that manipulating molecular distortion can be an effective strategy to regulate molecular self-assembly behavior of the polymer donors and achieve excellent aggregation properties, blend miscibility, and photovoltaic performance of the PSCs.

The Chemistry and Applications of Heteroisoindigo Units as Enabling Links for Semiconducting Materials.

ConspectusBecause of their low-temperature processing properties and inherent mechanical flexibility, semiconducting materials are promising candidates for enabling flexible displays, renewable energy, biological sensors, and healthcare. Progress has been made in materials performance by developing judicious materials design strategies. For example, improvements in electron transport have required new electron-deficient aromatics. Among them, isoindigo (IID) is an important functional group utilized in conjugated aromatics, where the structure combines two sets of five-membered electron-withdrawing lactam rings, exhibiting enhanced solubility, excellent chemical and thermal stabilities, broad absorption, and intriguing electron affinity.In the past decade, researchers have mainly focused on IID-based materials. However, the effect of heteroatom modification of the IID core has rarely been systemically investigated. In conventional conjugated polymers, single bonds connect the monomers, leading to energetic disorder and torsion defects, while ladder-type polymers are often intractable because of their fused nature. In this regard, the molecular design of new π scaffolds based on IID is central to the development of high-performance semiconductor polymers. Especially, a complete refresh of molecular design strategies and novel conjugated polymers with unique structures are needed to circumvent the disadvantages of the conventional ladder-type polymers.In this Account, we systematically summarize our recent progress in the design, synthesis, and structure-property relationships of IID- and particularly hetero-IID-based functional materials. More specifically, starting with molecular engineering of hetero-IIDs with variable electronic effects, conjugation lengths, and numbers of heterorings, we discuss the effect of the heteroring on the absorption spectra and energy levels. Additionally, we investigate a series of electron-withdrawing substitution of IIDs and hetero-IIDs and their molecular self-assembly behavior and the device performance. Furthermore, we discuss a series of IID-bis(EDOT) copolymers with hydrophilic ethylene glycol side chains for accumulation-mode organic thin-film electrochemical transistors, in which the relationships among the molecular structure, operational stability, film morphology, and device performance were revealed. Compared with IID polymers, the HOMO levels and optical band gaps of the thiophene and thienothiophene IID copolymers markedly decrease, and these polymers exhibit ambipolar charge transport. When we further expanded the IID core to a thieno[3,2-b][1]benzothiophene isoindigo (TBTI) core, such as in TBTIT, bulk-heterojunction solar cells employing this polymer class as the electron donor achieved good efficiency for additive- and annealing-free device conditions. When we introduced electron-deficient pyridine on the IID core, both the LUMO and HOMO energy levels of the copolymers markedly decreased, which significantly improved the electron mobility. In addition, we compare the correlation between the polymer structures of IID and hetero-IID copolymers with thiophene and benzothiophene as comonomers and their absorption spectra and energy levels. In particular, we evaluate the planarity and the dihedral angle between the repeat units, with systematic analysis by theoretical calculations to support our design concepts. We discuss polymer designs arising from simple aldol condensation, where the rigid backbone conformation has been locked by the double bonds. Our polymers display broad absorption from the visible to the NIR-II region, and more importantly, the high electron affinities of these polymers provide a platform to realize ambient-stable electron transport in solution-processed organic thin-film transistors. These exciting results are expected to open doors to new horizons of semiconducting materials in terms of other charming applications and the design and synthesis of superior materials.

Side-chain engineering of medium bandgap polymer donors for efficient polymer solar cells

Abstract Polymer solar cells (PSCs) have received widespread attentions recently due to the significant innovations of narrow bandgap n-type organic semiconductor (n-OS) acceptors. To obtain efficient PSCs, it is crucial to employ suitable donor/acceptor pair with matched electronic energy levels, complementary absorption spectra, appropriate molecular self-assembly behavior and preferred blend film morphology, which can be achieved by rational molecular structure optimization. Here we develop three D-A copolymer donors J55, J65 and J75 based on identical building blocks of bithienyl-benzodithiophene (BDTT) D-unit and bifluorine substituted benzotriazole A-unit with different flexible side-chains on BDTT unit to regulate the molecular electronic energy levels and molecular aggregation features, for further improving photovoltaic performance of the PSCs. The three D-A copolymers showed similar absorption profiles due to the identical building blocks. In comparison with the alkyl side-chain substituted polymer J55, the polymers J65 and J75 with alkylthio side-chain and alkylsilyl side-chain showed gradually down-shifted highest occupied molecular orbital energy levels (EHOMO) of −5.38 and −5.43 eV, respectively, which is beneficial for obtaining high open-circuit voltage (Voc). The favorable morphology with preferred face-on orientation and stronger integrated intensity of the π-π stacking peak was formed in J75 blend, which contributes to charge transport, thus enhancing the fill factor (FF) and Jsc. The PSC with J75 as donor and ITIC as acceptor exhibits an efficient PCE of 11.07%, with a Voc of 0.94 V, an enhanced Jsc of 16.99 mA cm−2 and a high FF of 69.29%.

Tandem Molecular Self-Assembly Selectively Inhibits Lung Cancer Cells by Inducing Endoplasmic Reticulum Stress.

The selective formation of nanomaterials in cancer cells and tumors holds great promise for cancer diagnostics and therapy. Until now, most strategies rely on a single trigger to control the formation of nanomaterials in situ. The combination of two or more triggers may provide for more sophisticated means of manipulation. In this study, we rationally designed a molecule (Comp. 1) capable of responding to two enzymes, alkaline phosphatase (ALP), and reductase. Since the A549 lung cancer cell line showed elevated levels of extracellular ALP and intracellular reductase, we demonstrated that Comp. 1 responded in a stepwise fashion to those two enzymes and displayed a tandem molecular self-assembly behavior. The selective formation of nanofibers in the mitochondria of the lung cancer cells led to the disruption of the mitochondrial membrane, resulting in an increased level of reactive oxygen species (ROS) and the release of cytochrome C (Cyt C). ROS can react with proteins, resulting in endoplasmic reticulum (ER) stress and the unfolded protein response (UPR). This severe ER stress led to disruption of the ER, formation of vacuoles, and ultimately, apoptosis of the A549 cells. Therefore, Comp. 1 could selectively inhibit lung cancer cells in vitro and A549 xenograft tumors in vivo. Our study provides a novel strategy for the selective formation of nanomaterials in lung cancer cells, which is powerful and promising for the diagnosis and treatment of lung cancer.

Understanding Electron Transport in Disk-Shaped Triphenylene-Tris(naphthaleneimidazole)s through Structural Modification and Theoretical Investigation.

Disk-shaped molecules with large aromatic π-surfaces are a class of organic semiconductors in which the charge-carrier transport properties could be greatly facilitated by preferred intermolecular stacking of the π-surfaces. The optical and electronic properties are not only determined by the core aromatic structure of these disk-shaped molecules but are also strongly dependent on the side chains, which directly impact the molecular self-assembly behavior in condensed phases. Triphenylene-tris(naphthaleneimidazole) (TP-TNI) is a recently reported n-type semiconductor featuring a large π-core and branched side chains, with an electron-transporting mobility reaching 10-4 cm2 V-1 s-1. To further improve material performance, a detailed study is needed to understand the dependence of carrier transport properties on both the core electronic structure and side chain. Here, we present the detailed synthesis and characterization of a TP-TNI derivative bearing linear side chains, which has demonstrated a field-effect electron-transport mobility of up to 1.3 × 10-3 cm2 V-1 s-1. The more than 1 order improvement in electron-transport properties over the branched side chain homologue can be correlated to ordered twisted packing in the thin film, as revealed by in situ variable temperature grazing incidence wide-angle X-ray scattering studies. In-depth theoretical understanding of the frontier orbitals, reorganization energies, and charge-transfer integrals of TP-TNI molecules has provided further insight into the relationship between the molecular stacking geometry and charge-transport properties.

1,3,5-Benzenetribenzoic Acid on Cu(111) and Graphene/Cu(111): A Comparative STM Study.

The self-assembly of 1,3,5-benzenetribenzoic acid (BTB) molecules on both Cu(111) and epitaxial graphene grown on Cu(111) were studied by scanning tunneling microscopy (STM) and low-energy electron diffraction (LEED) under ultrahigh vacuum conditions. On Cu(111), the BTB molecules were found to mainly arrange in close-packed structures through H-bonding between the (partially) deprotonated carboxylic acid groups. In addition, porous structures formed by intact BTB molecules-and also based on H-bonding-were observed. On graphene grown on Cu(111) the BTB molecules mainly form porous structures accompanied by small patches of disordered close-packed structures. Upon annealing, BTB adsorbed on Cu(111) is fully deprotonated and arranges in the close-packed structure while in contrast on graphene/Cu(111) the porous network is exclusively formed. This shows that the molecular self-assembly behavior is highly dependent on the first substrate layer: one graphene layer is sufficient to considerably alter the interplay of molecule substrate and intermolecular interactions in favor of the latter interactions.

Tuning of peptide assembly through force balance adjustment

Controlled self-assembly of amphiphilic tripeptides into distinct nanostructures is achieved via a controlled design of the molecular architecture. The tripeptide Ac-Phe-Phe-Lys-CONH2 (FFK), hardly soluble in water, forms long amyloid-like tubular structures with the aid of β-sheet hydrogen bonding and aromatic π–π stacking. Substitution of phenylalanine (F) with tyrosine (Y), that is, only a subtle structural variation in adding a hydroxyl group to the phenyl ring, results in great change in molecular self-assembly behavior. When one F is substituted with Y, the resulting molecules of FYK and YFK self-assemble into long thinner fibrils with high propensity for lateral association. When both Fs are substituted with Y, the resulting YYK molecule forms spherical aggregates. Introduction of hydroxyl groups into the molecule modifies aromatic interactions and introduces hydrogen bonding. Moreover, since the driving forces for peptide self-assembly including hydrogen bonding, electrostatic repulsion, and π–π stacking have high interdependence with each other, changes in aromatic interaction induce a Domino effect and cause a shift of force balance to a new state. This leads to significant variations in self-assembly behavior.

Langmuir monolayers of the long-chain alkyl derivatives of a nucleoside analogue and the formation of self-assembled nanoparticles

The long-chain alkyl derivatives of a nucleoside analogue—acyclovir were prepared in the paper. One is stearyl-glycero-succinyl-acyclovir (SGSA) with a single 18-carbon length (C18) alkyl chain. Another is dioctadecyl-aspartate-succinyl-acyclovir (DASA) with double C18 alkyl chains. They were prepared by the esterification of succinyl-acyclovir with the lipids, and sodium salts of them were also prepared. Guanine moieties and alkyl moieties bring the derivatives intermolecular hydrogen bonding and hydrophobic interaction in water separately. The forces are influenced by the number of alkyl chains and the charged state, and determine the solubility and the self-assembly behavior of the derivatives. The double alkyl-chain derivatives (DASA and DASA-Na) formed rigid Langmuir monolayers on air/water surface, while the single alkyl chain derivatives (SGSA and SGSA-Na) did not. However, cholesterol (Chol) could assist SGSA to form rigid monolayers through inserting into the alkyl chains of SGSA to mimic the second alkyl chain. SGSA self-aggregates in water were prepared by the injection method with tetrahydrofuran as solvent. Cuboid-like shape and nanoscale size demonstrated that SGSA self-aggregates were self-assembled nanoparticles. Shape, particle size, zeta potential and phase transition of the nanoparticles were characterized. And they showed an average size of 83.2 nm, a negative surface charge of −31.3-mV zeta potential and a gel–liquid crystalline phase transition of 50.38 °C. The formation mechanism of self-assembled nanoparticles was analyzed. Hydrophobic interaction of alkyl chains improves SGSA molecules to form bilayers, and then cuboid-like nanoparticles were obtained by layer-by-layer aggregation based on inter-bilayers hydrogen bonding. However, the charged guanine moieties make SGSA-Na lose the function of hydrogen bonding so that SGSA-Na only forms vesicles in water based on hydrophobic interaction. Strong hydrophobicity and wide-open rigid double alkyl chains of DASA and DASA-Na restrict self-assembly in water media, and no homogeneous suspensions were obtained. Therefore, the molecular self-assembly behavior of the long-chain alkyl derivatives of nucleoside analogues on water surface or in water media is determined by the number of alkyl chains and the charged state.

Molecular self-assembly behavior of mono[6-O-6-(4-carboxyl-phenyl)]-β-CD in solution and solid state

A novel modified cyclodextrin, mono[6-O-6-(4-carboxyl-phenyl)]-β-CD (1), has been synthesized by the reaction of mono[6-(p-toluenesulfonyl)]-β-CD with 4-hydroxybenzoate, and its molecular self-assembly behavior in both solution and solid state was studied by means of crystallography, NMR spectroscopy and microcalorimetry. The results indicate that the bezoic acid groups are successively penetrated intermolecularly into the adjacent β-CD cavities to form helical columnar supramolecules in the solid state. As compared with crystal, the similar self-assembly behavior of 1 in aqueous solution has also been confirmed by the1H ROESY spectroscopy. Thermodynamically, the formation of polymeric supramolecules by modified CD in aqueous solution is mainly driven by entropy changes.

Molecular self-assembly behavior of mono[6-O-6-(4-carboxyl-phenyl)]-b-CD in solution and solid state

Molecular self-assembly behavior of mono[6-O-6-(4-carboxyl-phenyl)]-b-CD in solution and solid state