Molecular Clamp Research Articles

Molecular basis of sequence-specific recognition of pre-ribosomal RNA by nucleolin.

The structure of the 28 kDa complex of the first two RNA binding domains (RBDs) of nucleolin (RBD12) with an RNA stem-loop that includes the nucleolin recognition element UCCCGA in the loop was determined by NMR spectroscopy. The structure of nucleolin RBD12 with the nucleolin recognition element (NRE) reveals that the two RBDs bind on opposite sides of the RNA loop, forming a molecular clamp that brings the 5' and 3' ends of the recognition sequence close together and stabilizing the stem-loop. The specific interactions observed in the structure explain the sequence specificity for the NRE sequence. Binding studies of mutant proteins and analysis of conserved residues support the proposed interactions. The mode of interaction of the protein with the RNA and the location of the putative NRE sites suggest that nucleolin may function as an RNA chaperone to prevent improper folding of the nascent pre-rRNA.

Force production by single kinesin motors.

Motor proteins such as kinesin, myosin and polymerase convert chemical energy into work through a cycle that involves nucleotide hydrolysis. Kinetic rates in the cycle that depend upon load identify transitions at which structural changes, such as power strokes or diffusive motions, are likely to occur. Here we show, by modelling data obtained with a molecular force clamp, that kinesin mechanochemistry can be characterized by a mechanism in which a load-dependent isomerization follows ATP binding. This model quantitatively accounts for velocity data over a wide range of loads and ATP levels, and indicates that movement may be accomplished through two sequential 4-nm substeps. Similar considerations account for kinesin processivity, which is found to obey a load-dependent Michaelis-Menten relationship.

The ATPase cycle of Hsp90 drives a molecular 'clamp' via transient dimerization of the N-terminal domains.

How the ATPase activity of Heat shock protein 90 (Hsp90) is coupled to client protein activation remains obscure. Using truncation and missense mutants of Hsp90, we analysed the structural implications of its ATPase cycle. C-terminal truncation mutants lacking inherent dimerization displayed reduced ATPase activity, but dimerized in the presence of 5'-adenylamido-diphosphate (AMP-PNP), and AMP-PNP- promoted association of N-termini in intact Hsp90 dimers was demonstrated. Recruitment of p23/Sba1 to C-terminal truncation mutants also required AMP-PNP-dependent dimerization. The temperature- sensitive (ts) mutant T101I had normal ATP affinity but reduced ATPase activity and AMP-PNP-dependent N-terminal association, whereas the ts mutant T22I displayed enhanced ATPase activity and AMP-PNP-dependent N-terminal dimerization, indicating a close correlation between these properties. The locations of these residues suggest that the conformation of the 'lid' segment (residues 100-121) couples ATP binding to N-terminal association. Consistent with this, a mutation designed to favour 'lid' closure (A107N) substantially enhanced ATPase activity and N-terminal dimerization. These data show that Hsp90 has a molecular 'clamp' mechanism, similar to DNA gyrase and MutL, whose opening and closing by transient N-terminal dimerization are directly coupled to the ATPase cycle.

Syntaphilin: A Syntaxin-1 Clamp that Controls SNARE Assembly

Syntaxin-1 is a key component of the synaptic vesicle docking/fusion machinery that forms the SNARE complex with VAMP/synaptobrevin and SNAP-25. Identifying proteins that modulate SNARE complex formation is critical for understanding the molecular mechanisms underlying neurotransmitter release and its modulation. We have cloned and characterized a protein called syntaphilin that is selectively expressed in brain. Syntaphilin competes with SNAP-25 for binding to syntaxin-1 and inhibits SNARE complex formation by absorbing free syntaxin-1. Transient overexpression of syntaphilin in cultured hippocampal neurons significantly reduces neurotransmitter release. Furthermore, introduction of syntaphilin into presynaptic superior cervical ganglion neurons in culture inhibits synaptic transmission. These findings suggest that syntaphilin may function as a molecular clamp that controls free syntaxin-1 availability for the assembly of the SNARE complex, and thereby regulates synaptic vesicle exocytosis.

Novel Molecular Clamp Method for Anomeric Stereocontrol of Glycosylation

Stereocontrolled glycosylation is described by using a molecular clamp, which binds a glycosyl donor to an acceptor and controls their spatial arrangement. An α(1 → 4) glycosidic linkage was formed in a good yield with high selectivity by the use of phthaloyl bridge bound to both 6-positions of a glycosyl donor and an acceptor. β-Selective glycosylation was effected by the use of a silyl bridge attached to the same 6-positions of the same glycosyl donor and acceptor. Application of this method to the synthesis of a maltotetraose derivative is also described.

Single kinesin molecules studied with a molecular force clamp.

Kinesin is a two-headed, ATP-driven motor protein that moves processively along microtubules in discrete steps of 8 nm, probably by advancing each of its heads alternately in sequence. Molecular details of how the chemical energy stored in ATP is coupled to mechanical displacement remain obscure. To shed light on this question, a force clamp was constructed, based on a feedback-driven optical trap capable of maintaining constant loads on single kinesin motors. The instrument provides unprecedented resolution of molecular motion and permits mechanochemical studies under controlled external loads. Analysis of records of kinesin motion under variable ATP concentrations and loads revealed several new features. First, kinesin stepping appears to be tightly coupled to ATP hydrolysis over a wide range of forces, with a single hydrolysis per 8-nm mechanical advance. Second, the kinesin stall force depends on the ATP concentration. Third, increased loads reduce the maximum velocity as expected, but also raise the apparent Michaelis-Menten constant. The kinesin cycle therefore contains at least one load-dependent transition affecting the rate at which ATP molecules bind and subsequently commit to hydrolysis. It is likely that at least one other load-dependent rate exists, affecting turnover number. Together, these findings will necessitate revisions to our understanding of how kinesin motors function.

Coactivator OBF-1 makes selective contacts with both the POU-specific domain and the POU homeodomain and acts as a molecular clamp on DNA.

The lymphoid-specific transcriptional coactivator OBF-1 (also known as OCA-B or Bob-1) is recruited to octamer site-containing promoters by interacting with Oct-1 or Oct-2 and thereby enhances the transactivation potential of these two Oct factors. For this interaction the POU domain is sufficient. By contrast, OBF-1 does not interact with the POU domains of other POU proteins, such as Oct-4, Oct-6, or Pit-1, even though these factors bind efficiently to the octamer motif. Here we examined the structural requirements for selective interaction between the POU domain and OBF-1. Previous data have shown that formation of a ternary complex among OBF-1, the POU domain, and the DNA is critically dependent on residues within the octamer site. By methylation interference analysis we identified bases that react differently in the presence of OBF-1 compared to the POU domain alone, and using phosphothioate backbone-modified probes in electrophoretic mobility shift assays, we identified several positions influencing ternary complex formation. We then used Oct-1/Pit-1 POU domain chimeras to analyze the selectivity of the interaction between OBF-1 and the POU domain. This analysis indicated that both the POU specific domain (POUS) and the POU homeodomain (POUH) contribute to complex formation. Amino acids that are different in the Pit-1 and Oct-1 POU domains and are considered to be solvent accessible based on the Oct-1 POU domain/DNA cocrystal structure were replaced with alanine residues and analyzed for their influence on complex formation. Thereby, we identified residues L6 and E7 in the POUS and residues K155 and I159 in the POUH to be critical in vitro and in vivo for selective interaction with OBF-1. Furthermore, in an in vivo assay we could show that OBF-1 is able to functionally recruit two artificially separated halves of the POU domain to the promoter DNA, thereby leading to transactivation. These data allow us to propose a model of the interaction between OBF-1 and the POU domain, whereby OBF-1 acts as a molecular clamp holding together the two moieties of the POU domain and the DNA.

A molecular clamp in the crystal structure of the N-terminal domain of the yeast Hsp90 chaperone.

Hsp90 is a highly specific chaperone for many signal transduction proteins, including steroid hormone receptors and a broad range of protein kinases. The crystal structure of the N-terminal domain of the yeast Hsp90 reveals a dimeric structure based on a highly twisted sixteen stranded beta-sheet, whose topology suggests a possible 30-domain-swapped structure for the intact Hsp90 dimer. The opposing faces of the beta-sheets in the dimer define a potential peptide-binding cleft, suggesting that the N-domain may serve as a molecular 'clamp' in the binding of ligand proteins to Hsp90.

The use of antibody fragments for crystallization and structure determinations.

We thank Andrew Prongay for his earlier contributions to the crystallization of the HIV p24 Fab complex, Jan McClure (Bristol Myers-Squibb Pharmaceutical Corporation, Seattle, WA) for providing the anti-p24 monoclonals, Lorna Ehrlich and Carol Carter (SUNY, Stony Brook, NY) for the recombinant HIV p24, and Tianwei Lin for discussions on antibody sequencing. We are grateful for an MRC and an NIH grant for MGR and for a research scholar award to LCK from the American Foundation for AIDS Research.

Structure-Function Relationship of the Eukaryotic DNA Replication Factor, Proliferating Cell Nuclear Antigen

Proliferating cell nuclear antigen (PCNA) is essential for eukaryotic DNA replication and functions as a processivity factor of DNA polymerase delta (pol delta). Due to the functional and structural similarity with the beta-subunit of Escherichia coli DNA polymerase III, it has been proposed that PCNA would act as a molecular clamp during DNA synthesis. By site-directed mutagenesis and biochemical analyses, we have studied the functional domains of human PCNA required for stimulation of replication factor C (RF-C) ATPase and DNA synthesis by pol delta. Short deletions from either the N or C termini caused drastic changes in extraction and chromatographic behaviors, suggesting that both of these terminal regions are crucial to fold the tertiary structure of PCNA. The short C-terminal stretch from Lys254 to Glu256 is necessary for stimulation of RF-C ATPase activity, but not for stimulation of DNA synthesis by pol delta. Nine basic amino acids that are essential for activating DNA synthesis by pol delta are positioned at the internal alpha-helices of PCNA. This result is in good agreement with the observation that PCNA has a ring structure similar to the beta-subunit and clamps a template DNA through this positively charged internal surface. Several other charged amino acids are also required to stimulate either RF-C ATPase or pol delta DNA synthesis. Some of them are positioned at loops which are exposed on one of the side surface of PCNA adjacent to the C-terminal loop. In addition, the beta-sheets composing the intermolecular interface of the trimeric PCNA are important for interaction with pol delta. Therefore, the outer surface of PCNA has multiple functional surfaces which are responsible for the interaction with multiple factors. Furthermore, the two side surfaces seem to be functionally distinguishable, and this may determine the orientation of tracking PCNA along the DNA.

Tm studies of a tertiary structure from the human hepatitis delta agent which functions in vitro as a ribozyme control element.

Viroids and other circular subviral RNA pathogens, such as the hepatitis delta agent, use a rolling circle replication cycle requiring an intact circular RNA. However, many infectious RNAs have the potential to form self-cleavage structures, whose formation must be controlled in order to preserve the circular replication template. The native structure of delta RNA contains a highly conserved element of local tertiary structure which is composed of sequences partially overlapping those needed to form the self-cleavage motif. A bimolecular complex containing the tertiary structure can be made. We show that when it is part of this bimolecular complex the potential cleavage site is protected and is not cleaved by the delta ribozyme, demonstrating that the element of local tertiary structure can function as a ribozyme control element in vitro. Physical studies of the complex containing this element were carried out. The complex binds magnesium ions and is not readily dissociated by EDTA under the conditions tested; > 50% of the complexes remain following incubation in 1 mM EDTA at 60 degrees C for 81 min. The thermal stability of the complex is reduced in the presence of sodium ions. A DNA complex and a perfect RNA duplex studied in parallel showed a similar effect, but of lesser magnitude. The RNA complex melts at temperatures approximately 10 degrees C lower in buffers containing 0.5 mM MgCl2 and 100 mM NaCl than in buffers containing 0.5 mM MgCl2 with no NaCl (78.1 compared with 87.7 degrees C). The element of local tertiary structure in delta genomic RNA appears to be a molecular clamp whose stability is highly sensitive to ion concentration in the physiological range.

Oligonucleotide clamps arrest DNA synthesis on a single-stranded DNA target.

Triple helices can be formed on single-stranded oligopurine target sequences by composite oligonucleotides consisting of two oligonucleotides covalently linked by either a hexaethylene glycol linker or an oligonucleotide sequence. The first oligomer forms Watson-Crick base pairs with the target, while the second oligomer engages in Hoogsteen base pairing, thereby acting as a molecular clamp. The triple-helical complex formed by such an oligonucleotide clamp, or "oligonucleotide-loop-oligonucleotide" (OLO), is more stable than either the corresponding trimolecular triple helix or the double helix formed upon binding of the oligopyrimidine complement to the same oligopurine target. Attaching a psoralen derivative to the 5' end of the OLO allowed us to photoinduce a covalent linkage to the target sequence. The psoralen moiety became covalently linked to all three portions of the triplex, thereby making the oligonucleotide clamp irreversible. These crosslinking reactions introduced strong stop signals during DNA replication, as shown on a plasmid containing a portion of the HIV proviral sequence of human immunodeficiency virus. A 16-mer oligopurine sequence corresponding to the "polypurine tract" of human immunodeficiency virus was chosen as a target for a psoralen-OLO conjugate. Three different stop signals for DNA polymerase were observed, corresponding to different sites of polymerase arrest on its template. Even in the absence of photoinduced crosslinking, the psoralen-OLO conjugate was able to arrest DNA replication. The formation of triple-helical structures on single-stranded targets may provide an alternative to the antisense strategy for the control of gene expression.

Evidence of Changes in Protease Sensitivity and Subunit Exchange Rate on DNA Binding by C/EBP

The transcription factor C/EBP uses a bipartite structural motif to bind DNA. Two protein chains dimerize through a set of amphipathic alpha helices termed the leucine zipper. Highly basic polypeptide regions emerge from the zipper to form a linked set of DNA contact surfaces. In the recently proposed a "scissors grip" model, the paired set of basic regions begin DNA contact at a central point and track in opposite directions along the major groove, forming a molecular clamp around DNA. This model predicts that C/EBP must undertake significant changes in protein conformation as it binds and releases DNA. The basic region of ligand-free C/EBP is highly sensitive to protease digestion. Pronounced resistance to proteolysis occurred when C/EBP associated with its specific DNA substrate. Sequencing of discrete proteolytic fragments showed that prominent sites for proteolysis occur at two junction points predicted by the "scissors grip" model. One junction corresponds to the cleft where the basic regions emerge from the leucine zipper. The other corresponds to a localized nonhelical segment that has been hypothesized to contain an N-cap and facilitate the sharp angulation necessary for the basic region to track continuously in the major groove of DNA.