Modification Of Electronic Structure Research Articles

Resorcinol‐Phthalaldehyde Resins for Photosynthesis of Hydrogen Peroxide: Modulation of Electronic Structure and Integration of Dual Channel Pathway

AbstractModulating of electronic structure of photocatalyst and integration of dual channel pathway are promising strategy for efficient photosynthesis of hydrogen peroxide (H2O2) from pure water without sacrificial agent and oxygen exposure. In this work, nontoxic aromatic dialdehyde is used to replace the commonly used toxic formaldehyde to form resorcinol‐phthalaldehyde resins through a hydrothermal method. The introducing of aromatic ring as π spacer increases the separation distance of electrons and holes to avoid their recombination. H2O2 can be produced via integrated oxygen reduction reaction (ORR) and water oxidation reaction (WOR) due to the suitable energy band positions and spatially separated reaction sites. Resorcinol‐p‐phthalaldehyde (RP) resin exhibits a promising H2O2 yield of 3351 µmol g−1 h−1 with high apparent quantum yield (AQY) of 14.9% at 420 nm and solar‐to‐chemical conversion (SCC) efficiency of 1.54%. This work provides a simple strategy to modulate the charge separation efficiency and redox reaction pathway on photocatalyst at molecular level design.

Modulating Valence Electrons and Na Occupancy in Layered Cathodes for High-Performance Na-Ion Batteries.

Na-ion batteries (NIBs) hold promise as a leading option for large-scale energy storage. However, their development faces challenges due to the lack of high-performance cathode materials. P2-type layered oxides are seen as potential cathode materials for NIBs due to higher structure stability, yet their commercialization is hindered by limited capacity and subpar phase transitions during Na extraction and insertion at high voltages. In this study, we introduce a new P2-type cathode material, Na0.76Ni0.23Li0.1Ti0.02Mn0.65O1.998F0.02 (NLTMOF), synthesized with ternary Li/Ti/F substitution. This modification of ternary Li/Ti/F substitution significantly tailors the electronic structures, increasing the number of valence electrons near the Fermi energy level. This facilitates the electronic conductivity and their involvement in charge compensation, thereby enhancing reversible capacity. Additionally, ternary doping synergistically adjusts the Na occupancy at the Na layer for favorable Na extraction without P2-O2 phase transitions even under a high voltage of 4.4 V, boosting cycling stability. As a result, NLTMOF demonstrates a reversible capacity of 110.0 and 132.2 mAh g-1 at 2-4.2 and 2-4.4 V, respectively, and maintains greatly enhanced cycling stability over long cycles. This study sheds light on the design of transition metal oxides for advanced cathode materials through the modulation of electronic structure and Na occupancy in cathode materials, thus promoting the development of NIBs.

Tungsten doping-Induced electronic structure modulation in NiFe-based metal-organic frameworks for enhanced oxygen evolution reaction

NiFe-based metal-organic frameworks (MOFs) are promising low-cost and easily prepared non-precious catalysts for the oxygen evolution reaction (OER). However, effectively modulating the electronic structures in these electrocatalysts remains a critical challenge. In this study, we successfully incorporated tungsten into FeNi-MOF to synthesize W-doped FeNi2.4-MIL-53 and achieved electronic structure modulation. The results show that the optimized FeNi2.4W0.05-MIL-53 exhibits a lowe overpotential of 235 mV at a current density of 10 mA cm−2, low Tafel slope of 43.3 mV dec−1, and high cyclability over 1000 cycles. Density functional theory (DFT) calculations demonstrate that the conversion from O* to OOH* is the rate-determining step on the active sites of FeNi2.4W0.05-MIL-53. The incorporation of tungsten induces an upshift of the d-band center of the active site, effectively modulating the adsorption energy of oxygen intermediates, thereby enhancing the catalytic activity.

Local spin-state tuning enables high-efficiency nickel sulfide cathode for stable alkaline Zn batteries

Nickel sulfide (Ni3S2) has shown great promise as advanced cathode in alkaline nickel-zinc batteries (ANZBs) for its good electrochemical reversibility and electronic conductivity. However, due to the unfavorable OH− adsorption capability and low intrinsic activity of Ni sites originated from the unsuitable d-electron spin state, the overall performances of Ni3S2 are yet unsatisfactory for practical ANZBs. Herein, we demonstrate the engineering of local spit state of Ni sites via a facile electrochemical activation in Ni3S2 to significantly boost its comprehensive energy storage capability. After electrochemical treatment, the spit state of fractional Ni2+ (eg4t2g4) sites of Ni3S2 is successfully transformed into high-valence Ni3+ (eg4t2g3), which considerably enhances the OH− adsorption capability and redox reactivity. The optimal Ni3S2 electrode exhibits a high capacity of 1.11 mAh cm−2 at 1 mA cm−2 and no capacity decay after 3000 cycles, which are far greater than the pristine Ni3S2 (0.39 mAh cm−2) electrode and also comparable to the best ever-reported alkaline cathodes. Furthermore, the assembled full ANZB can afford a peak energy density of 1.59 mWh cm−2 and power density of 33.92 mW cm−2. This work affords valuable insights into local electronic structure modulation of electrode materials for aqueous energy storage devices.

Morphology engineering and electronic structure remodeling of manganese-incorporated VN for boosting urea-assisted energy-saving hydrogen production

Urea-assisted water electrolysis offers a promising route to reduce energy consumption for hydrogen production and meanwhile treat urea-rich wastewater. Herein, we devised a shear force-involved polyoxometalate-organic supramolecular self-assembly strategy to fabricate 3D hierarchical porous nanoribbon assembly Mn-VN cardoons. A bimetallic polyoxovanadate (POV) with the inherent structural feature of Mn surrounded by [VO6] octahedrons was introduced to trigger precise Mn incorporation in VN lattice, thereby achieving simultaneous morphology engineering and electronic structure modulation. The lattice contraction of VN caused by Mn incorporation drives electron redistribution. The unique hierarchical architecture with modulated electronic structure that provides more exposed active sites, facilitates mass and charge transfer, and optimizes the associated adsorption behavior. Mn-VN exhibits excellent activity with low overpotentials of 86 mV and 1.346 V at 10 mA/cm2 for hydrogen evolution reaction (HER) and urea oxidation reaction (UOR), respectively. Accordingly, in the two-electrode urea-assisted water electrolyzer utilizing Mn-VN as a bifunctional catalyst, hydrogen production can occur at low voltage (1.456 V@10 mA/cm2), which has the advantages of energy saving and competitive durability over traditional water electrolysis. This work provides a simple and mild route to construct nanostructures and modulate electronic structure for designing high-efficiency electrocatalysts.

Electronic structure and microenvironment modulation of Pd@UiO-66 enhances direct CO esterification to dimethyl carbonate

While the microenvironment around metal catalytic sites is recognized to be crucial in heterogeneous catalysis, its roles in CO esterification to dimethyl carbonate remain subtle. Herein, Pd nanoparticles are confined into the metal–organic frameworks with TiIV metal substitutions and functional linker groups, namely Pd@Ti-Zr-UiO-66-X (X = H, NH2, NO2). The partial substitution of metal nodes by Ti species can dramatically enhance the activity of CO, and synergistically improves catalytic performance with electron-withdrawing functionalized nitroxide linkers. As a result, Pd@Ti-Zr-UiO-66-NO2 exhibits superior conversion of CO (67.5%), selectivity for DMC (83.5%, based on all products) and WTY for DMC (1725 g·kgcat−1·h−1) much higher than those of Pd@Zr-UiO-66-H with conversion of CO (46.4%), selectivity for DMC (87%) and WTY for DMC (1175 g·kgcat−1·h−1). Based on results of experimental and DFT calculation, the synergistic effect of highly electronegative Ti species and nitro-functional linker groups with electron-withdrawing ability realizes the precise control of the electronic structure and microenvironment of Pd NPs. The number of charges transferred from Pd NPs to Zr-UiO-66 and Ti-Zr-UiO-66-NO2 increased from 1.83 to 2.69 e, respectively. The microenvironment of electron-deficient palladium species and Ti-Zr-UiO-66-NO2 promotes the activation of MN and CO, which exhibits a superior performance in direct CO esterification to dimethyl carbonate. This study not only provides a new approach for rational modulation of the chemical microenvironment of metal centers and optimization of catalytic performance but also offers important insights for the design of heterogeneous catalysts.

Manipulation of Electronic Effect and Assembly Architecture to Invoke Oxidation of Ethylbenzene by Hierarchical Co3O4 Wreaths.

A high-performance transition-metal oxide catalyst can be designed by appropriately integrating the concepts of morphology regulation and electronic structure modulation. In this work, hierarchical Co3O4 wreaths (CCW) enriched with oxygen vacancies (Ov) were facilely constructed for the selective oxidation of ethylbenzene (EB) to acetophenone (AP). Under the screened optimal reaction conditions, the CCW catalyst can offer a 79.1% conversion of EB (ri = 0.244 mol gcat-1 h-1) accompanied by a selectivity of 92.3% to AP. The good reaction performance can be attributed to the cooperation of defect engineering and architecture design, which can synergistically facilitate the EB oxidation performance by augmenting the intrinsic reactivity and accessibility of active sites. This work presents a reliable route to construct a high-performance transitional metal oxide catalyst via manipulation of electronic effect and assembly architecture for the selective oxidation of EB and beyond.

Sulfur doping-induced morphological and electronic structure modification of polyoxometalate FeWO4 for enhanced removal of organic pollutants from water

Wolframite (FeWO4), a typical polyoxometalate, serves as an auspicious candidate for heterogeneous catalysts, courtesy of its high chemical stability and electronic properties. However, the electron-deficient surface-active Fe species in FeWO4 are insufficient to cleave H2O2 via Fe redox-mediated Fenton-like catalytic reaction. Herein, we doped Sulfur (S) atom into FeWO4 catalysts to refine the electronic structure of FeWO4 for H2O2 activation and sulfamethoxazole (SMX) degradation. Furthermore, spin-state reconstruction on S-doped FeWO4 was found to effectively refine the electronic structure of Fe in the d orbital, thereby enhancing H2O2 activation. S doping also accelerated electron transfer during the conversion of sulfur species, promoting the cycling of Fe(III) to Fe(II). Consequently, S-doped FeWO4 bolstered the Fenton-like reaction by nearly two orders of magnitude compared to FeWO4. Significantly, the developed S-doped FeWO4 exhibited a remarkable removal efficiency of approximately 100% for SMX within 40 min in real water samples. This underscores its extensive pH adaptability, robust catalytic stability, and leaching resistance. The matrix effects of water constituents on the performance of S-doped FeWO4 were also investigated, and the results showed that a certain amount of Cl−, SO42−, NO3−, HCO3− and PO43− exhibited negligible effects on the degradation of SMX. Theoretical calculations corroborate that the distinctive spin-state reconstruction of Fe center in S-doped FeWO4 is advantageous for H2O2 decomposition. This discovery offers novel mechanistic insight into the enhanced catalytic activity of S doping in Fenton-like reactions and paves the way for expanding the application of FeWO4 in wastewater treatment.

Study of boron alloying on microstructure evolution and electrocatalytic performance of self-supported Co–P@Cu immiscible alloy

In this contribution, the effects of B alloying on microstructure evolution and catalytic efficiency variation of Co–P@Cu immiscible alloy were systematically studied. The addition of B element significantly inhibited the second phase separation behavior by weakening Marangoni convection, resulting in the three-dimensional continuous porous structure of Co–P spheres. After dealloying treatment, the CCP–1B catalyst containing 1 wt% B exhibited preeminent electrocatalytic activity with low overpotential of 68 mV at 10 mA cm−2 and Cdl value of 50 mF cm−2 for HER. Combined with FESEM and XPS analysis, this remarkable catalytic performance of Co–P@Cu could be attributed to the remarkable refinement of particles size, more active sites for electron transport obtained from continuously porous structure and the obvious modulation of electronic structure of Co–P particles by B doping. Through the further DFT analysis, the redistribution of the charge density and the decrease of ΔGH* optimized the H* adsorption and desorption energies with a reduction of energy barrier, which were beneficial for the obvious improvement of catalytic performance of these self-supported phosphides catalysts.

Strong Interactions between Au Nanoparticles and BiVO4 Photoanode Boosts Hole Extraction for Photoelectrochemical Water Splitting.

Strong metal-support interaction (SMSI) is widely proposed as a key factor in tuning catalytic performances. Herein, the classical SMSI between Au nanoparticles (NPs) and BiVO4 (BVO) supports (Au/BVO-SMSI) is discovered and used innovatively for photoelectrochemical (PEC) water splitting. Owing to the SMSI, the electrons transfer from V4+ to Au NPs, leading to the formation of electron-rich Au species (Auδ-) and strong electronic interaction (i.e., Auδ--Ov-V4+), which readily contributes to extract photogenerated holes and promote charge separation. Benefitted from the SMSI effect, the as-prepared Au/BVO-SMSI photoanode exhibits a superior photocurrent density of 6.25 mA cm-2 at 1.23 V versus the reversible hydrogen electrode after the deposition of FeOOH/NiOOH cocatalysts. This work provides a pioneering view for extending SMSI effect to bimetal oxide supports for PEC water splitting, and guides the interfacial electronic and geometric structure modulation of photoanodes consisting of metal NPs and reducible oxides for improved solar energy conversion efficiency.

Strong Interactions between Au Nanoparticles and BiVO4 Photoanode Boosts Hole Extraction for Photoelectrochemical Water Splitting

AbstractStrong metal‐support interaction (SMSI) is widely proposed as a key factor in tuning catalytic performances. Herein, the classical SMSI between Au nanoparticles (NPs) and BiVO4 (BVO) supports (Au/BVO‐SMSI) is discovered and used innovatively for photoelectrochemical (PEC) water splitting. Owing to the SMSI, the electrons transfer from V4+ to Au NPs, leading to the formation of electron‐rich Au species (Auδ−) and strong electronic interaction (i.e., Auδ−‐Ov‐V4+), which readily contributes to extract photogenerated holes and promote charge separation. Benefitted from the SMSI effect, the as‐prepared Au/BVO‐SMSI photoanode exhibits a superior photocurrent density of 6.25 mA cm−2 at 1.23 V versus the reversible hydrogen electrode after the deposition of FeOOH/NiOOH cocatalysts. This work provides a pioneering view for extending SMSI effect to bimetal oxide supports for PEC water splitting, and guides the interfacial electronic and geometric structure modulation of photoanodes consisting of metal NPs and reducible oxides for improved solar energy conversion efficiency.

Regulating the Electron Distribution of Metal-Oxygen for Enhanced Oxygen Stability in Li-rich Layered Cathodes.

Li-rich Mn-based layered oxides (LLO) hold great promise as cathode materials for lithium-ion batteries (LIBs) due to their unique oxygen redox (OR)chemistry, which enables additional capacity. However, the LLOs face challenges related to the instability of their ORprocess due to the weak transition metal (TM)-oxygen bond, leading to oxygen loss and irreversible phase transition that results in severe capacity and voltage decay. Herein, a synergistic electronic regulation strategy of surface and interior structures to enhance oxygen stability is proposed. In the interior of the materials, the local electrons around TM and O atoms may be delocalized by surrounding Mo atoms, facilitating the formation of stronger TM─O bonds at high voltages. Besides, on the surface, the highly reactive O atoms with lone pairs of electrons are passivated by additional TM atoms, which provides a more stable TM─O framework. Hence, this strategy stabilizes the oxygen and hinders TM migration, which enhances the reversibility in structural evolution, leading to increased capacity and voltage retention. This work presents an efficient approach to enhance the performance of LLOs through surface-to-interior electronic structure modulation, while also contributing to a deeper understanding of their redox reaction.

Sulfur-Tuned Main-Group Sb-N-C Catalysts for Selective 2-Electron and 4-Electron Oxygen Reduction.

The selective oxygen reduction reaction (ORR) is important for various energy conversion processes such as the fuel cells and metal-air batteries for the 4e- pathway and hydrogen peroxide (H2O2) electrosynthesis for the 2e- pathway. However, it remains a challenge to tune the ORR selectivity of a catalyst in a controllable manner. Herein, an efficient strategy for introducing sulfur dopants to regulate the ORR selectivity of main-group Sb-N-C single-atom catalysts is reported. Significantly, Sb-N-C with the highest sulfur content follows a 2e- pathway with high H2O2 selectivity (96.8%) and remarkable mass activity (96.1 A g-1 at 0.65V), while the sister catalyst with the lowest sulfur content directs a 4e- pathway with a half-wave potential (E1/2 = 0.89V) that is more positive than commercial Pt/C. In addition, practical applications for these two 2e-/4e- ORR catalysts are demonstrated by bulk H2O2 electrosynthesis for the degradation of organic pollutants and a high-power zinc-air battery, respectively. Combined experimental and theoretical studies reveal that the excellent selectivity for the sulfurized Sb-N-Cs is attributed to the optimal adsorption-desorption of the ORR intermediates realized through the electronic structure modulation by the sulfur dopants.

Phase-Transition-Induced Surface Reconstruction of Rh1 Site in Intermetallic Alloy for Propane Dehydrogenation.

The fine-tuning of the geometric and electronic structures of active sites plays a crucial role in catalysis. However, the intricate entanglement between the two aspects results in a lack of interpretable design for active sites, posing a challenge in developing high-performance catalysts. Here, we find that surface reconstruction induced by phase transition in intermetallic alloys enables synergistic geometric and electronic structure modulation, creating a desired active site microenvironment for propane dehydrogenation. The resulting electron-rich four-coordinate Rh1 site in the RhGe0.5Ga0.5 intermetallic alloy can accelerate the desorption of propylene and suppress the side reaction and thus exhibits a propylene selectivity of ∼98% with a low deactivation constant of 0.002 h-1 under propane dehydrogenation at 550 °C. Furthermore, we design a computational workflow to validate the rationality of the microenvironment modulation induced by the phase transition in an intermetallic alloy.

Promotion of Acid-Water Oxidation by Lattice Distortion and Orbital Hybridization Induced by Ionic Dopant in Pyrochlore Y2Ru2O7.

For acid-water oxidation, pyrochloric ruthenates are thought to be extremely effective electrocatalysts. In this work, through partial B-site replacement with larger M2+ cations, the electronic states of Y2Ru2O7 with strong electron correlations are reasonably managed, by which the inherent performance is tremendously promoted. Based on this, the improved Y2Ru1.9Sr0.1O7 electrocatalyst exhibits an outstanding durability and presents a highly inherent mass activity of 1915.1 A gRu-1 (at 1.53 V vs RHE). The enhanced oxygen-evolving reaction (OER) activity by ionic dopant in YRO pyrochlore can be attributed to two aspects, i.e., the lattice distortion induced inhibition of the grain coarsening, which results in a large surface area for YRO-M and increases the OER active sites, and the weakening of electron correlation via broadening of the Ru 4d bandwidths due to the increase of the average radius of B-site ions, which gives rise to an enhancement of conductivity and a strengthened hybridization between Ru 4d and O 2p orbitals and improves the reaction kinetics. The synergistic effects of lattice distortion and orbital hybridization promote the enhanced OER activity. The results would provide fresh concepts for the design of improved electrocatalysts and underscore the significance of managing the intrinsic performance through the dual modification of microstructure morphology and electronic structure.

Electron Accumulation Induced by Electron Injection-Incomplete Discharge on NiFe LDH for Enhanced Oxygen Evolution Reaction.

Optimizing the local electronic structure of electrocatalysts can effectively lower the energy barrier of electrochemical reactions, thus enhancing the electrocatalytic activity. However, the intrinsic contribution of the electronic effect is still experimentally unclear. In this work, the electron injection-incomplete discharge approach to achieve the electron accumulation (EA) degree on the nickel-iron layered double hydroxide (NiFe LDH) is proposed, to reveal the intrinsic contribution of EA toward oxygen evolution reaction (OER). Such NiFe LDH with EA effect results in only 262mV overpotential to reach 50 mAcm-2, which is 51mV-lower compared with pristine NiFe LDH (313mV), and reduced Tafel slope of 54.8mVdec-1 than NiFe LDH (107.5mVdec-1). Spectroscopy characterizations combined with theoretical calculations confirm that the EA near concomitant Vo can induce a narrower energy gap and lower thermodynamic barrier to enhance OER performance. This study clarifies the mechanism of the EA effect on OER activity, providing a direct electronic structure modulation guideline for effective electrocatalyst design.

Bimetal organic framework derived CoM@N–C composites as bifunctional oxygen catalysts for Zn-air batteries

Metal-loaded nitrogen-doped carbon (M@N–C) catalysts have shown promise as electrocatalysts for replacing noble metal catalysts in industrial processes. To study the influence on structural and performance caused by different bimetal doping, a family of bimetals CoM@N–C (M = Cu/Ni/Fe) composites with porous surface and abundant C defects were well-designed. After bimetallic doping, more defects are introduced into the carbon frameworks, and the metal-N species are fixed. As such, efficient utilization of active sites and rapid mass transfer make the reaction kinetics process more favorable and stable. Density functional theory calculations indicate that Cu/Ni doping optimizes the electronic environment of the Co–N, resulting in the balanced adsorption and dissociation of oxygen intermediates. While the synergy of FeCo activates the O=O, which promotes the sharp decrease in free energy of ∗OOH to ∗O, shifting the rate-determining step for oxygen reduction reaction. This indicates the adsorption site transfer of CoFe0.05@N–C in oxygen reduction and evolution reactions. The CoFe0.05@N–C catalyst exhibits superior bifunctional catalytic activity (with a potential gap of 0.80 V) than that of Pt catalysts. This work presents a simple strategy to fabricate well-defined bimetals doping in bifunctional oxygen electrocatalysts and it is expected to inspire future work on the role of electronic structure modulation and interface engineering.

Enhancing photocatalytic H2O2 production with Au co-catalysts through electronic structure modification

Gold-based co-catalysts are a promising class of materials with potential applications in photocatalytic H2O2 production. However, current approaches with Au co-catalysts show limited H2O2 production due to intrinsically weak O2 adsorption at the Au site. We report an approach to strengthen O2 adsorption at Au sites, and to improve H2O2 production, through the formation of electron-deficient Auδ+ sites by modifying the electronic structure. In this case, we report the synthesis of TiO2/MoSx-Au, following selective deposition of Au onto a MoSx surface which is then further anchored onto TiO2. We further show that the catalyst achieves a significantly increased H2O2 production rate of 30.44 mmol g−1 h−1 in O2-saturated solution containing ethanol. Density functional theory calculations and X-ray photoelectron spectroscopy analysis reveal that the MoSx mediator induces the formation of electron-deficient Auδ+ sites thereby decreasing the antibonding-orbital occupancy of Au-Oads and subsequently enhancing O2 adsorption. This strategy may be useful for rationally designing the electronic structure of catalyst surfaces to facilitate artificial photosynthesis.

Boosting Electrocatalytic Ethylene Epoxidation by Single Atom Modulation.

The electrochemical synthesis of ethylene oxide (EO) using ethylene and water under ambient conditions presents a low-carbon alternative to existing industrial production process. Yet, the electrocatalytic ethylene epoxidation route is currently hindered by largely insufficient activity, EO selectivity, and long-term stability. Here we report a single atom Ru-doped hollandite structure KIr4O8 (KIrRuO) nanowire catalyst for efficient EO production via a chloride-mediated ethylene epoxidation process. The KIrRuO catalyst exhibits an EO partial current density up to 0.7 A cm-2 and an EO yield as high as 92.0 %. The impressive electrocatalytic performance towards ethylene epoxidation is ascribed to the modulation of electronic structures of adjacent Ir sites by single Ru atoms, which stabilizes the *CH2CH2OH intermediate and facilitates the formation of active Cl2 species during the generation of 2-chloroethanol, the precursor of EO. This work provides a single atom modulation strategy for improving the reactivity of adjacent metal sites in heterogeneous electrocatalysts.

Boosting Electrocatalytic Ethylene Epoxidation by Single Atom Modulation

AbstractThe electrochemical synthesis of ethylene oxide (EO) using ethylene and water under ambient conditions presents a low‐carbon alternative to existing industrial production process. Yet, the electrocatalytic ethylene epoxidation route is currently hindered by largely insufficient activity, EO selectivity, and long‐term stability. Here we report a single atom Ru‐doped hollandite structure KIr4O8 (KIrRuO) nanowire catalyst for efficient EO production via a chloride‐mediated ethylene epoxidation process. The KIrRuO catalyst exhibits an EO partial current density up to 0.7 A cm−2 and an EO yield as high as 92.0 %. The impressive electrocatalytic performance towards ethylene epoxidation is ascribed to the modulation of electronic structures of adjacent Ir sites by single Ru atoms, which stabilizes the *CH2CH2OH intermediate and facilitates the formation of active Cl2 species during the generation of 2‐chloroethanol, the precursor of EO. This work provides a single atom modulation strategy for improving the reactivity of adjacent metal sites in heterogeneous electrocatalysts.