Modified Carbon Fiber Microelectrode Research Articles

Real-time monitoring abscisic acid release from single rice protoplast by amperometry at microelectrodes modified with abscisic acid receptor PYL2

It was previously reported that stress induces a cellular production of abscisic acid in plants, but no direct method shows the evidence. Here, an electrochemical microsensor involving an abscisic acid receptor PYL2 modified carbon fiber microelectrode was fabricated by self-assembly method, where the Cu2+ combined with the histidine tag of PYL2 on the surface of microelectrode was used as the detection probe, the mediated reaction between Cu+ and ferricyanide realized the amplification responses and provided the microsensor with a high sensitivity for detection of abscisic acid with a detection limit of 0.8 nM. With use of this microsensor, an increase of extracellular abscisic acid from single rice protoplast induced by sulfate, osmotic and salinity stress was real-time monitored. Direct measurement of free extracellular abscisic acid in single plant cells might offer important new insights into its role in plants challenged by abiotic stresses.

One-step prepared of e-Gelatin-CNTs nano-composite fiber modified carbon fiber microelectrode for continuous dopamine monitoring: Characterization, biocompatibility evaluation and in vivo experiment

Fabricating electrochemical sensor capable of stable sensing in complex organism's environment will undoubtedly underpin key in the development of implanted electrochemical sensor. However, nonspecific protein adsorption can greatly reduce sensing sensitivity of electrode due to the abundance of protein in vivo. Herein, we aim to fabricating a modified layer of good protein adsorption resistance. The nano-composite fibers from gelatin with good hydrophily and multiwall carbon nanotubes (CNTs) for constructing on the surface of carbon fiber microelectrode using one-step electrospinning technology (e-Gelatin-CNTs/CFME). A comprehensive discussing on the protein adsorption resistance of e-Gelatin-CNTs/CFME that are, through the use of SEM, AFM, water contact angle, UV–vis, cyclic voltammetry and I-T. The resulting electrochemical sensor revealed stable sensing sensitivity in protein solution, a slightly decrease (0.02nA/μM). Furthermore, the sensor was successfully used for the detection of DA in human blood. More remarkable, e-Gelatin-CNTs nano-composite fibers presented excellent biocompatibility, which could meet the biosafety as implantation materials in vivo. This work provided a platform for the development of implantable electrochemical sensor.

Simultaneous detection of norepinephrine and 5-hydroxytryptophan using poly-alizarin/multi-walled carbon nanotubes-graphene modified carbon fiber microelectrode array sensor

Multi-walled carbon nanotubes, graphene and alizarin polymer composites coated carbon fiber microelectrode array sensor (p-AZ/MWCNT-GR/CFMEA) was constructed and used for the simultaneous detection of norepinephrine (NE) and 5-hydroxytryptophan (5-HT). The morphology and structural characteristics of sensor are characterized using scanning electron microscopy, energy dispersive spectroscopy and X-ray diffraction. Its electrochemical behavior has been studied with cyclic voltammetry and electrochemical impedance spectroscopy. The sensor exhibits excellent electrochemical activity for the oxidation of NE and 5-HT, two well separated oxidation peaks with the peak potential difference of 220 mV are observed on the cyclic voltammogram. NE and 5-HT both show two electrons and two protons electrochemical reaction on the p-AZ/MWCNT-GR/CFMEA. Under the optimized experiment conditions, the linear ranges of the sensor for NE and 5-HT are 0. 08- 8 μM and 0. 1–20 μM with detection limits of 4. 22 nM and 14. 2 nM (S/N = 3), respectively. In addition, the microsensor array show good reproducibility, stability and selectivity for the determination of NE and 5-HT. Finally, the p-AZ/MWCNT-GR/CFMEA is applied to the simultaneous detection of NE and 5-HT in human serum samples and macrophages.

In Situ Ratiometric Determination of Cerebral Ascorbic Acid after Ischemia Reperfusion.

Ascorbic acid (AA) is significant in protecting the brain from further damage and maintaining brain homeostasis after ischemia stroke (IS); however, the dynamic change of cerebral AA content after different degrees of ischemic stroke is still unclear. Herein, carboxylated single-walled carbon nanotube (CNT-COOH)- and polyethylenedioxythiophene (PEDOT)-modified carbon fiber microelectrodes (CFEs) were proposed to detect in situ cerebral AA with sensitivity, selectivity, and stability. Under differential pulse voltammetry scanning, the CFE/CNT-COOH/PEDOT gave a ratiometric, electrochemically responsive signal. The internal standard peak at -310 mV was from the reversible peak of O2 reduction and the deprotonation and protonation of quinone groups, while AA was oxidized at -70 mV. In vivo experimental results indicated that the cerebral AA level gradually increased with the ischemic time increasing in different middle cerebral artery occlusion (MCAO) model mice. This work implies that the increasing cerebral AA level may be highly related to the glutamate excitotoxicity and ROS-led cell apoptosis and paves a new way for further understanding the release and metabolic mechanisms of AA during ischemia reperfusion and IS.

COF-Coated Microelectrode for Space-Confined Electrochemical Sensing of Dopamine in Parkinson's Disease Model Mouse Brain.

Parkinson's disease (PD) is a progressive neurodegenerative disorder causing the loss of dopaminergic neurons in the substantia nigra and the drastic depletion of dopamine (DA) in the striatum; thus, DA can act as a marker for PD diagnosis and therapeutic evaluation. However, detecting DA in the brain is not easy because of its low concentration and difficulty in sampling. In this work, we report the fabrication of a covalent organic framework (COF)-modified carbon fiber microelectrode (cCFE) that enables the real-time detection of DA in the mouse brain thanks to the outstanding antibiofouling and antichemical fouling ability, excellent analytical selectivity, and sensitivity offered by the COF modification. In particular, the COF can inhibit the polymerization of DA on the electrode (namely, chemical fouling) by spatially confining the molecular conformation and electrochemical oxidation of DA. The cCFE can stably and continuously work in the mouse brain to detect DA and monitor the variation of its concentration. Furthermore, it was combined with levodopa administration to devise a closed-loop feedback mode for PD diagnosis and therapy, in which the cCFE real-time monitors the concentration of DA in the PD model mouse brain to instruct the dose and injection time of levodopa, allowing a customized medication to improve therapeutic efficacy and meanwhile avoid adverse side effects. This work demonstrates the fascinating properties of a COF in fabricating electrochemical sensors for in vivo bioanalysis. We believe that the COF with structural tunability and diversity will offer enormous promise for selective detection of neurotransmitters in the brain.

Amperometric bio-sensing of lactate and oxygen concurrently with local field potentials during status epilepticus

Epilepsy is a prevalent neurological disorder with a complex pathogenesis and unpredictable nature, presenting limited treatment options in >30 % of affected individuals. Neurometabolic abnormalities have been observed in epilepsy patients, suggesting a disruption in the coupling between neural activity and energy metabolism in the brain. In this study, we employed amperometric biosensors based on a modified carbon fiber microelectrode platform to directly and continuously measure lactate and oxygen dynamics in the brain extracellular space. These biosensors demonstrated high sensitivity, selectivity, and rapid response time, enabling in vivo measurements with high temporal and spatial resolution. In vivo recordings in the cortex of anaesthetized rats revealed rapid and multiphasic fluctuations in extracellular lactate and oxygen levels following neuronal stimulation with high potassium. Furthermore, real-time measurement of lactate and oxygen concentration dynamics concurrently with network electrical activity during status epilepticus induced by 4-aminopyridine (4-AP) demonstrated phasic changes in lactate levels that correlated with bursts of electrical activity, while tonic levels of lactate remained stable during seizures. This study highlights the complex interplay between lactate dynamics, electrical activity, and oxygen utilization in epileptic seizures.

Fabrication of dendrite PtPd bimetallic nanocomposites modified carbon fiber microelectrodes for detecting superoxide anion released from living cells

In this work, the carbon fiber microelectrode (CFME) coated by ERGO-CNT network was used as a substrate to support dendrite PtPd nanoclusters. An enzyme-free O2− electrochemical sensor (PtPd@ERGO-CNT-CFME) was prepared based on this strategy. Due to the brilliant loading and dispersing abilities of the substrate and the excellent electrochemical activity of the dendrite PtPd alloy, PtPd@ERGO-CNT-CFME demonstrated outstanding detection ability towards O2−. The as-constructed sensor showed a wide-linear range of 16–744 μM and 744–3064 μM with high sensitivity of 6967.3 μA mM−1 cm−2 and 4124.3 μA mM−1 cm−2, and the detection limit was 5.07 μM. Furthermore, PtPd@ERGO-CNT-CFME was successfully applied to monitor O2− released from living cells. This phenomenon indicated the application potential for O2− detection in biological samples.

A portable electrochemical sensing platform for serotonin detection based on surface-modified carbon fiber microelectrodes.

Serotonin (5-HT) is one of the key neurotransmitters in the human body, regulating numerous physiological functions. A disruption in 5-HT homeostasis could result in serious health problems, including neurodegenerative disorders, depression, and 5-HT syndrome. Detection of 5-HT concentrations in biological fluids, such as urine, is a potential solution for early diagnosis of these diseases. In this study, we developed a novel, simple, and low-cost electrochemical sensing platform consisting of a portable workstation with customized electrodes for 5-HT detection in artificial biological fluids. Nafion/carbon nanotubes (CNTs) and electrochemically modified carbon fiber microelectrodes (Nafion-CNT/EC CFMEs) displayed improved 5-HT sensitivity and selectivity. Together with a customized Ag/AgCl reference electrode and Pt counter electrode, the portable 5-HT sensing platform had a sensitivity of 0.074 μA μM-1 and a limit of detection (LOD) of 140 nM. This system was also assessed to measure 5-HT spiked in artificial urine samples, showing nearly full recovery rates. These satisfactory results demonstrated that the portable system exhibits outstanding performance and confirmed the feasibility of 5-HT detection, which can be used to provide point-of-care analysis in actual biological samples.

Development of a novel ratiometric electrochemical sensor for monitoring β-galactosidase in Parkinson's disease model mice

Rapid, simple, accurate and highly sensitive detection of enzymes is essential for early screening and clinical diagnosis of many diseases. In this study, we report the fabrication of a turn-on ratiometric electrochemical sensor for the in situ determination of β-Galactosidase (β-Gal) based on surface engineering and the design of a molecular probe (Pygal) specific for β-Gal recognition. First, Pygal probe was synthesized and characterized, and then co-assembled with the methylene blue (MB) internal reference probe on the surface of single-wall carbon nanotubes (SWCNT)-modified carbon fiber microelectrode (CFME). The resulting CFME/SWCNT/MB + Pygal sensor is activated in the presence of β-Gal giving one peak at 0.33 V originating from the oxidation of the product of Pygal enzymatic hydrolysis (PyOH). Another oxidation peak attributed to MB appears simultaneously at −0.28 V allowing the construction of a ratiometric electrochemical sensor for β-Gal detection with improved sensitivity and accuracy. The sensor showed a linear response to β-Gal in a wide concentration range from 1.5 to 30 U L−1 and a low detection limit of 0.1 U L−1. Moreover, the sensor demonstrated excellent selectivity against several biologically relevant hydrolases and redox-active molecules. Finally, the combination of excellent electrochemical performance and favorable physicochemical properties of CFME allowed the determination of β-Gal in the whole blood of Parkinson's Disease (PD) model mice. The workflow reported in this study provides a strategy for the design and development of sensors for the in vivo monitoring of other enzymes important for the early diagnosis of different health issues.

Sensitive Carbon Fiber Microelectrode for the Quantification of Diuron in Quality Control of a Commercialized Formulation.

Nickel(II) tetrasulfonated phthalocyanine (p-NiTSPc)-modified carbon fiber microelectrode (CFME) was used for the first time to investigate the electrochemical quantification of diuron in an agrochemical formulation. The surface morphology and elementary analysis of unmodified carbon fiber microelectrode (CFME) and p-NiTSPc-CFME were performed using atomic force microscopy (AFM) and energy dispersive X-ray spectroscopy (EDX), respectively. Cyclic voltammetry (CV) was used to investigate the electrochemical behaviour of diuron, while square wave voltammetry (SWV) was used for quantitative analysis of diuron. Upon variation of some key analytical parameters, a calibration curve was plotted in the concentration range from 21.450 to 150.150 μM, leading to a detection limit (DL) of 8.030 μM mg/L (3.3σ/m) and a limit of quantification (LQ) of 20.647 μM mg/L. The fabricated p-NiTSPc-CFME was successfully applied for quality control in a commercialized formulation of diuron. The standard additional method was used, and the recovery rate of diuron was found to be 98.4%.

Simultaneous determination of aesculin and aesculetin and their interactions with DNA using carbon fiber microelectrode modified by Pt–Au bimetallic nanoparticles

Electrode sensitivity and selectivity in complex biological matrices are major challenges in the development of electrochemical sensors. Bimetallic nanoparticles provide a new perspective for enhancing electrocatalytic property because of some specific synergetic effects. In this work, platinum nanoparticles (PtNPs) and gold nanoparticles (AuNPs) modified carbon fiber microelectrode (PtNPs/AuNPs/CFME) was fabricated to determine aesculin and aesculetin simultaneously. Differential pulse voltammetry (DPV) method was conducted for the electrochemical sensing of aesculin and aesculetin, the modified electrode displayed high electrocatalytic activity for the redox of these two drugs. The linear ranges of aesculin and aesculetin were 0.4–10 μM and 0.04–1 μM, with the detection limits of 41 nM and 3.6 nM, respectively, which were the lowest values achieved. Furthermore, an electrochemical investigation of the interactions of these two drugs with Calf thymus double stranded DNA (dsDNA) was investigated by PtNPs/AuNPs/CFME, the decrease in peak currents is proportional to DNA concentration and can be used to detect DNA. The electrode was successfully used to measure aesculin and aesculetin in mouse serum and urine with 98.0–104.8% recovery. The novel electrochemical probe possessed excellent performances of high sensitivity, good reproducibility, and simplicity of fabrication, which will facilitate effective detection of aesculin and aesculetin for metabolic kinetics study.

Self-Terminated Electroless Deposition of Surfactant-Free and Monodispersed Pt Nanoparticles on Carbon Fiber Microelectrodes for Sensitive Detection of H2O2 Released from Living Cells.

We report a self-terminated electroless deposition method to prepare surfactant-free and monodispersed Pt nanoparticle (NP)-modified carbon fiber microelectrodes (Pt NP/CFEs) for electrochemical detection of hydrogen peroxide (H2O2) released from living cells. The surfactant-free and monodispersed Pt NPs with a uniform size of 65 nm are spontaneously deposited on a CFE surface by immersing an exposed carbon fiber (CF) of CFE in the PtCl42- solution, in which an exposed CF can be used as the reducing agent and stabilizer. A self-terminated electroless deposition method is demonstrated, in which the density and size of Pt NPs on a CFE surface do not increase when the reaction time increases from 20 to 60 min. The self-terminated electroless deposition process not only can effectively avoid any manual electrode modification and thus largely minimize person-to-person and electrode-to-electrode deviations but also can avoid the use of any extra reductant or surfactant in the fabrication process. Therefore, Pt NPs/CFEs, with good reproducibility and sensitivity, not only exhibit high electrocatalytic activity toward the oxidation of H2O2 but also maintain the spatial resolution of CFEs. Moreover, Pt NPs/CFEs can detect H2O2 with a wide linear range of 0.5-80 μM and a low detection limit of 0.17 μM and then can be successfully applied in the monitoring of H2O2 released from RAW 264.7 cells. The self-terminated electroless deposition method can also be extended to selectively prepare other metal NP-modified CFEs, such as Au NPs/CFEs or Ag NPs/CFEs, by choosing the metal ions with higher reduction potential as precursors. This work provides a simple, straightforward, and general method for the preparation of small, surfactant-free, and monodispersed metal NP-modified CFEs with high sensitivity, reproducibility, and spatial resolution.

Ag2S/Ag Nanoparticle Microelectrodes for In Vivo Potentiometric Measurement of Hydrogen Sulfide Dynamics in the Rat Brain

Hydrogen sulfide (H2S) plays a pivotal role in gas signal transduction, neuroprotection, and regulation of physiological and pathological processes. However, in vivo tracking the dynamic of hydrogen sulfide in the complex brain environment still faces huge challenges. This study demonstrates a new potentiometric method to monitor in vivo the dynamics of hydrogen sulfide in the rat brain using silver nanoparticles (AgNPs)-modified carbon fiber microelectrodes (AgNPs/CFE) pretreated with Na2S (i.e., Ag2S/AgNPs/CFE), which acts as a solid-contact and ion-selective microelectrode. The Ag2S/AgNPs/CFE exhibits good potential response toward hydrogen sulfide in the range of 2.5-160 μM, with a detection limit of 0.8 μM. Because of the presence of Ag2S, the Ag2S/AgNPs/CFE shows good selectivity to hydrogen sulfide, avoiding the interference from coexistent electroactive neurochemicals and the analogies, such as ascorbic acid and cysteine in the central nervous system. This good selectivity combined with the reversibility, protein antifouling, and biocompatibility of the microelectrode enables the Ag2S/AgNPs/CFE to detect hydrogen sulfide in the rat brain during local microinfusion of Na2S and the change in pH. Our study provides a reliable method to track hydrogen sulfide selectively in vivo, which will help to explore the function of hydrogen sulfide in neurophysiology and pathology.

Platinized Silica Nanoporous Membrane Electrodes for Low‐Fouling Hydrogen Peroxide Detection

AbstractHydrogen peroxide (H2O2) is an important molecule that is widely used or exists in foods, medicines, detergents and human body. Therefore, fast and accurate detection of H2O2 is highly important in food security, disease diagnosis, etc. In this work, we report the fabrication of platinized silica nanoporous membrane (Pt@SNM) electrodes for the detection of H2O2 in complex in vitro and in vivo environments. The porous structure of SNM can effectively confine the electrodeposition of Pt nanostructures and meanwhile prevent the adsorption of fouling species on the underlying electrode. In comparison with conventional electrodes for H2O2 detection, the current one exhibited excellent antifouling ability and worked well in complex real samples. As we demonstrated that the Pt@SNM modified carbon fiber microelectrode could work pretty stably in cortex of rat brain up to 90 min. We believe that this methodology can be extended for electrochemical detection of many other species in strongly fouling media.

Ultra-low level detection of hepatocellular carcinoma global methylation using a AuNP modified carbon fiber microelectrode.

Hepatocellular carcinoma (HCC) is one of the most common cancerous diseases, with a low 5 year survival rate. Global hypomethylation drives genomic instability, which is regarded as one biomarker for early diagnosis. Long interspersed nucleotide element-1 (LINE-1) makes up around 17% of the genome, and could be regarded as a surrogate marker for global DNA methylation. In this work, a gold nanoparticle (AuNP) modified carbon fiber microelectrode (CFME) with a diameter of 7 μm was applied for the first time to detect the methylation level of LINE-1, by distinguishing adsorption affinities between different DNA bases and AuNPs. Several parameters, including AuNP electrodeposition time, sample adsorption time, and DNA concentration have been analyzed and optimized. The detection limit of our assay was 0.1 nM with only 2 μL sample solution. And the CFME had an excellent sensitivity of 10% methylation change and had the capacity to distinguish only one methylated CpG site. The global DNA methylation level of real samples including cell lines and clinical tissues was tested. Higher signals of HCC cell lines and cancer tissues were observed respectively, compared with normal hepatic cell lines and normal tissues. This work provides a promising approach for HCC early diagnosis and prognosis.

(Invited) Co-Detection of Dopamine and Metabolites Using Fast Scan Cyclic Voltammetry and Modified Carbon Fiber-Microelectrodes

Fast scan cyclic voltammetry (FSCV) and carbon-fiber microelectrodes (CFMEs) have been utilized used to detect several important neurochemicals in vivo. However, this method is limited due to the ability to discriminate dopamine from several of its metabolites. Carbon nanotube and polymer modified microelectrodes will be utilized to detect physiologically low levels of neurotransmitters that also resist surface fouling and have high temporal resolution to detect fast changes of neurotransmitters. Furthermore, novel electrode coatings and waveforms will also be utilized to detect several neurotransmitter metabolites such as dopamine, norepinephrine, normetanephrine, 3-methoxytyramine (3-MT), homovanillic acid (HVA), 3,4 dihydroxyphenylacetic acid (DOPAC), and other metabolites. Currently, dopamine is thought to be an important neurotransmitter concerning several disease states such Parkinson’s disease, drug abuse (amphetamine, cocaine, etc.), and even for gambling and sex-disorders. However, dopamine is metabolized on a subsecond timescale, and studies have pointed to the importance of neurotransmitter metabolites in these disease states apart from dopamine. Presently, there is no method to selectively co-detect these neurotransmitter metabolites of dopamine utilizing FSCV. Through several waveform modifications and polymer electrode coatings, we develop a novel method to tune the detection of dopamine and said metabolites, which will help differentiate dopamine and respective metabolites through the shapes and positions of their respective cyclic voltammograms. Preliminary measurements have also been made in zebrafish whole brain ex vivo showing the application of this technique in biological tissue. Discriminating the detection of dopamine from its metabolites will have many implications in better understanding complex disease, behavioral, and pharmacological states.

The gold nanoparticle sensitized pRGO-MWCNTs grid modified carbon fiber microelectrode as an efficient sensor system for simultaneous detection of three dihydroxybenzoic acid isomers

A sensitive and novel carbon fiber microelectrode (CFME) modified by the gold nanoparticles sensitized partially reduced multilayer graphene oxide-multiwall carbon nanotubes (pRGO-MWCNTs/Aus) was developed for the simultaneous determination of dihydroxybenzoic acid (DHBA) isomers. The surfaces of modified microelectrodes were characterized by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS). The synergistic effect of pRGO-MWCNTs and Aus reduced the overpotential, enhanced the electrocatalytic ability and improved the peak shape of DHBAs. The modified microelectrode exhibited a good electrochemical behavior followed by well-separated oxidation peaks of 2,3-DHBA, 2,5-DHBA and 2,6-DHBA at 0.637 V, 0.565 V and 0.950 V, respectively, so that the three DHBA isomers can be detected simultaneously without previous separation. And the peak currents were linearly dependent on 2,3-DHBA, 2,5-DHBA and 2,6-DHBA concentrations using differential pulse voltammetry (DPV) method in the ranges of 8–9000 nM, 8–8000 nM and 20–8000 nM with detection limits of 0.34 nM, 0.55 nM and 1.3 nM (S/N = 3) for the simultaneous determination, respectively. The microsensor has good repeatability, stability, reproducibility and acceptable anti-interference performance. And it has been successfully applied to the real-time monitor the uptake of three DHBA isomers by plant roots.

Highly selective electrochemical method for the detection of serotonin at carbon fiber microelectrode modified with gold nanoflowers and overoxidized polypyrrole

A highly selective and sensitive electrochemical method was developed for the detection of serotonin (5-hydroxytryptamine, 5-HT) at gold nanoflowers (Au NFs) and overoxidized polypyrrole (OPPy) modified carbon fiber microelectrode (CFME). Carbon fiber was firstly modified with gold nanoflowers using electroless deposition method, and then modified with overoxidized polypyrrole using electrochemical polymerization and overoxidization to obtain OPPy/Au NFs/CFME. The obtained OPPy/Au NFs/CFME was characterized by field emission scanning electron microscopy and electrochemical techniques. It was found that the OPPy/Au NFs/CFME showed good sensitivity for the detection of 5-HT in the range of 10 nmol/L − 7.0 μmol/L with detection limit of 2.3 nmol/L, and negligible interferences from ascorbic acid, 5-hydroxyindole acetic acid and uric acid. The OPPy/Au NFs/CFME was successfully applied to the detection of 5-HT in human serum samples with good recovery. The work demonstrates that the electrochemical method, incorporating signal amplification of Au NFs with higher cation selection of OPPy, provides a promising tool for the detection of 5-HT in biological systems

Dual-opposite multi-walled carbon nanotube modified carbon fiber microelectrode for microfluidic chip-capillary electrophoresis determination of methyl parathion metabolites in human urine.

Methyl parathion (MP) is a highly toxic organophosphate and its exposure may lead to substantial adverse effects to human health. The existence of 4-nitrophenol (4-NP) in the form of free phenol, glucuronide (4-NP-G) or as a sulfate ester (4-NP-S) can be used as biomarkers to assess the duration and extent of MP exposure. In this work, a MC-CE device incorporating post-CE amperometric detection using multi-walled carbon nanotubes (MWNTs) modified carbon fiber microelectrode (CFME) was fabricated and assessed for simultaneous determination of 4-NP, 4-NP-G, and 4-NP-S in human urine. The detection sensitivity and stability was greatly enhanced by the modification of MWNTs. The capability of the MC-CE device with dual MWNTs modified CFME for detecting impurity was assessed and reliability established by high recoveries from 95 to 97% for spiked MP biomarkers. The method developed is shown to provide a simple, sensitive, and reliable means for monitoring 4-NP, 4-NP-G, and 4-NP-S in human urine.

Improved formation of electrically-deposited enzyme-embedded chitosan coatings onto carbon fiber microelectrodes

The addition of CAM into coating solutions provides for more robust enzyme modified carbon fiber microelectrodes.