Modification Of Dietary Fiber Research Articles

Effects of cavitation jet combined with ultrasound, alkaline hydrogen peroxide and Bacillus subtilis treatment on the properties of dietary fiber

In this study, we compared the effects of three methods on the structural, physicochemical, and functional properties of insoluble dietary fiber (IDF) in okara: cavitation jet plus ultrasonic treatment (UC), cavitation jet plus alkaline hydrogen peroxide treatment (HC), and cavitation jet plus fermentation with Bacillus subtilis (FC). Compared to UC-IDF, the two types of co-modified IDF showed significant differences in particle size and specific surface area. Structural analyses showed that HC-IDF had a porous structure and complex morphological structure, with a significant increase in the absorption peak area at around 3420 cm−1 and 1051 cm−1, and a significant decrease in thermal stability and crystallinity. Of the three treatments, HC most effectively enhanced the physicochemical and adsorption properties of IDF, including the emulsion stability (84.49% ± 3.5%), water-holding capacity (16.04 ± 0.05 g/g), glucose absorption capacity (53.17 ± 3.44 g/g), cholesterol absorption capacity (32.87 ± 0.89 mg/g), and nitrite absorption capacity (211.7 ± 0.17 μg/g). These results demonstrate the potential of HC-modified okara IDF as a valuable functional food ingredient. Therefore, the cavitation jet combined with alkaline hydrogen peroxide method has a good potential for application in the study of dietary fiber modification.

Modification of Soluble Dietary Fiber from Millet by Selenylation and Its Immune-Enhancing Activity

The immune activity of polysaccharides increases after structural modification, whereas the structure of dietary fiber is similar to that of polysaccharides, and research on the chemical modification of dietary fiber is lacking. Therefore, in this study, we used soluble dietary fiber from millet to chelate metal selenium ions, named the selenium-enriched additive (SDF-Se), and investigated its effects on macrophages and natural killer (NK) cells in vitro. The results showed that SDF-Se could activate RAW 264.7 cells through NF-κB and mitogen-activated protein kinase (MAPK) signaling and promote the accumulation of the reactive oxygen species, thereby increasing the levels of TNF-α, IL-6, and IL-10 and releasing numerous NO molecules. Furthermore, SDF-Se treatment induced NK cells to secrete cytokines (IFN-γ and TNF-α), cytoplasmic granules (granzyme-B), surface-activating receptors (NKp44), and increased CD56 and CD107a expressions, which promote NK cell cytotoxic responses. These results suggest that SDF-Se can promote macrophage and NK cell activation and be used as a potent immunostimulant.

High-pressure homogenization treatment of red seaweed Bangia fusco-purpurea affects the physicochemical, functional properties and enhances in vitro anti-glycation activity of its dietary fibers

In this study, high-pressure homogenization (HPH) technique was applied for the pretreatment of Bangia fusco-purpurea, and the effect of HPH on the composition, physiochemical and functional properties, and in vitro anti-glycation activity of dietary fiber from this seaweed (B. fusco-purpurea dietary fiber, BDF) was studied. Results showed that HPH significantly increased water-soluble dietary fiber (SDF) content in BDF. Water-holding capacity, oil-holding capacity, and glucose delay dialysis index of BDF were significantly enhanced after HPH treatment. Additionally, HPH significantly improved the in vitro anti-glycation activity of BDF by inhibiting the formation of advanced glycation end products (AGEs) and mitigating damage induced by AGEs on intestinal cells. These improvements could be attributed to the formation of the coarse and porous structure and greater exposure of hydroxyl groups of BDF caused by HPH treatment. These results implied the potential of HPH in seaweed processing and provided a scientific basis for the in-depth, comprehensive utilization of B. fusco-purpurea. Industrial relevanceHPH is an emerging non-thermal food processing technique with promising application potential in food industry. In this study, we found that HPH technique could significantly change the composition, improve physiochemical and functional properties and enhance anti-glycation activity of dietary fiber from seaweed B. fusco-purpurea. Our results validated the efficiency of HPH on dietary fiber modification, implying the potential of HPH in food industry and healthy industry.

Fermentation of grapefruit peel by an efficient cellulose-degrading strain, (Penicillium YZ-1): Modification, structure and functional properties of soluble dietary fiber

In the study, a highly efficient cellulose-degrading strain was screened, which was identified as a fungus in the genus Penicillium sp., named YZ-1. The content of soluble dietary fiber was greatly increased by the treatment of this strain. In addition, the effects of soluble dietary fiber from high-pressure cooking group (HG-SDF), strain fermentation group (FG-SDF) and control group (CK-SDF) on the physicochemical structure, and in vitro hypolipidemic activity were investigated. The results showed that the physicochemical structure of the raw materials was improved after fermentation, and FG-SDF exhibited the loosest structure, the highest viscosity and thermal stability. Furthermore, compared to CK-SDF and HG-SDF, FG-SDF showed the most significant improvement in functional properties, including cholesterol adsorption capacity (CAC), inhibition of pancreatic lipase activity (LI) and mixed bile acid adsorption capacity (BBC). Overall, these findings will provide new insights into dietary fiber modification and improve the comprehensive use value of grapefruit by-products.

The effect of ball milling on the structure, physicochemical and functional properties of insoluble dietary fiber from three grain bran

The effects of ball milling processing on the structure, physicochemical, and functional properties of insoluble dietary fiber (IDF) in bran from prosomillet, wheat and rice were investigated. Meanwhile, the effect of IDF on glucose tolerance and blood lipid levels in mice was evaluated as well. With findings, for all three grains, the particle sizes of IDF were significantly reduced after ball milling treatment (p < 0.05). Scanning electron microscopy revealed fragmented fiber with numerous pores and cracks. The reactive groups of three IDF samples were found to be similar by fourier transform infrared spectroscopy. And consistent with X-ray diffraction and thermal analysis, for all three grains, ball milling reduced the crystallinity of IDF and helped to increase the release of free phenol by 23.4 %, 8.9 %, and 12.2 %, respectively. Furthermore, the water holding capacity, glucose delay capacity, glucose, sodium cholate, and cholesterol adsorption capacity, and in vitro digestibility of starch and fat were all improved to varying degrees. Animal experiments showed that ball milling treatment effectively slowed the postprandial rise in blood sugar (especially IDF of rice bran) and blood lipids (especially IDF of prosomillet bran). As a result, ball milling treatment is a potential method for dietary fiber modification in the food industry.

Qualitative and Quantitative Correlation of Microstructural Properties and In Vitro Glucose Adsorption and Diffusion Behaviors of Pea Insoluble Dietary Fiber Induced by Ultrafine Grinding.

Ultrafine grinding is an important pretreatment to achieve the physical modification of dietary fiber. In this study, ultrafine grinding treatments were performed for different times to give pea insoluble dietary fiber (PIDF) samples with varied particle sizes (D50). The correlations and quantitative relationships between the microstructures of multi-scales PIDF and its in vitro glucose adsorption and diffusion behaviors were comprehensively evaluated. The results indicated that the specific surface area (SSA), pore volume (PV) and oxygen-to-carbon surface ratio (O/C) of PIDF were significantly increased by ultrafine grinding at the cellular scale, while D50 and cellulose crystallinity (CrI) were significantly decreased. These changes significantly improved the glucose adsorption capacity (GAC) of PIDF. The order of importance of microstructural changes on GAC was O/C > PV > SSA > CrI > D50. GAC showed positive exponential relationships with SSA, PV, and O/C and showed a negative linear relationship with CrI. The ability to retard glucose diffusion increased significantly with decreased fiber particle size because of improved adsorption and interception of glucose and the dense physical barrier effect of PIDF. The quantitative equation of maximum glucose dialysis retardation index was GDRImax = −1.65 ln(D50) + 16.82 ln(GAC) − 68.22 (R2 = 0.99). The results could provide theoretical support for quantitative and targeted intervention of dietary fiber structure for blood glucose control.

Screen of high efficiency cellulose degrading strains and effects on tea residues dietary fiber modification: Structural properties and adsorption capacities

In our study, two high efficiency cellulose degrading strains were screened, isolated and identified as Cochliobolus kusanoi and Aspergillus puulaauensis by 18S rDNA gene sequencing. In addition, the composite microbial system was constructed to develop the synergistic effect among different strains. Under the optimum conditions, the yield of soluble dietary fiber from tea residues by mixed fermentation method (MF-SDF) dramatically increased compared to single strain fermentation. The structural analysis demonstrated that all samples possessed the representative infrared absorption peaks of polysaccharides, whereas MF-SDF revealed more loose structure, lower crystallinity and smaller molecular size. For the adsorption capacities indexes, MF-SDF also owned the highest adsorbing capacity for the water molecule, oil molecule, cholesterol molecule and nitrite ion. Overall, our data showed that mixed fermentation method could be better choices to improve the functional properties of dietary fiber, and screening of cellulose degrading strains could provide new thinkings for the study of dietary fiber modification and realize high-quality utilization of crop residues.

Application of Fermentation Technology in Modification of Dietary Fiber

Application of Fermentation Technology in Modification of Dietary Fiber

Physicochemical and structural properties of dietary fiber from Rosa roxburghii pomace by steam explosion.

Rosa roxburghii pomace was treated by steam explosion (SE) at 0.87MPa for 97s. After SE treatment, the Insoluble dietary fiber (IDF) content of Rosa roxburghii pomace decreased from 45.13 ± 0.23 to 30.01 ± 0.15%, and the soluble dietary fiber (SDF) content increased from 9.31 ± 0.07 to 15.82 ± 0.31%. The structure of IDF and SDF after SE showed that the original compact structures were destroyed, and the specific surface areas increased. Thermal analysis showed that the thermal stability of the modified SDF was improved. However, SE did not change the crystal structure and functional group composition of IDF and SDF. Physicochemical analysis indicated that IDF had better hydration capacity after SE treatment, and the oil-holding capacities of IDF and SDF were also significantly improved. SE is an effective method to improve the utilization of Rosa roxburghii pomace and a feasible method for modification of dietary fiber.

Effect of thermally treated barley dietary fiber against hypercholesterolemia.

Dietary fiber is a nondigestible constituent of vegetal foods, formed by insoluble and soluble dietary fiber. The intake of dietary fiber, especially soluble dietary fiber, is limited and demands researcher's attention. The modification of cereal's dietary fiber, predominantly insoluble fiber, could be one possible solution. The current study evaluated the comparative effects of several thermal treatments on the modification of insoluble dietary fiber in barley and explored their therapeutic potential in vivo against hypercholesterolemia. The two cultivars of barley, Haider‐93 and Jau‐87, were thermally treated using different techniques, and dietary fiber was extracted. Successively, the intake of these dietary fibers was evaluated for its antilipidemic activity in normal and hypercholesterolemic rats. In the first phase, thermal treatments especially cooking without soaking increased the soluble fiber (68.08%). The roasting all increased the soluble fiber contents, however, at relatively lower rate (53.91%). The results of efficacy study revealed that biochemical parameters in control animals were within the normal clinical ranges, thus appraising the safe status of the experimental diets. The thermally treated barley fiber decreased total cholesterol (12.14%–12.63%), low‐density lipoprotein (14.12%–14.85%), and triglycerides (2.25%–4.32%). The study recorded increasing trends for high‐density lipoprotein in both normal and hypercholesterolemic rats. In the nutshell, thermal modification of dietary fiber increased the ratio of soluble to insoluble dietary fiber that improved its hypocholesterolemic potential. The thermally treated barley dietary fiber is effective in reducing the lipid profile in Sprague–dawley rats than untreated dietary fiber and, therefore, can be considered as a functional food and ingredient to cope different lifestyle diseases.

Comparative study of chemical treatments in combination with extrusion for the partial conversion of wheat and sorghum insoluble fiber into soluble.

Dietary fiber has gained greater attention owing to their positive and potential health perspectives. Cereals are the most important and enriched source of dietary fiber with more insoluble dietary fiber than soluble. For dietary fiber modification, chemical treatment with various techniques is considered as significant approach owing to its safety point of view and involves less damage to the molecular structure of the dietary fiber through chemical reagents and content of soluble dietary fiber is increased more efficiently. The current study was aimed to nutritionally characterize the cereal grains and to partially convert insoluble dietary fiber into soluble dietary fiber through chemical treatments in combination with extrusion. For the purpose, two varieties of each cereal were characterized for their chemical composition, mineral profile, and dietary fiber content according to the respective methods. Then, dietary fiber ratio in cereals was modified through chemical treatments, that is, acid, alkaline, and consecutive acid–alkaline followed by extrusion. Results regarding dietary fiber content of cereal grains exhibited that wheat (12.03–12.20 g/100 g) contained higher total dietary fiber followed by sorghum (6.70–6.90 g/100 g). Additionally, modification of SDF (1.97%) and IDF (11.48%) ratio in wheat and SDF (1.19%) and IDF (24.25%) ratio in sorghum through extrusion processing was nonsignificant while acid–alkaline treatment showed highly significant results, that is, 768.2% increase in SDF and 56.5% decrease in IDF in wheat and 952.38% increase in SDF and 71.17% decrease in IDF in sorghum. Among chemical treatments, higher result was given by acid–alkaline method and the lower outputs were observed in case of extrusion in both cereals. Conclusively, soluble dietary fiber was significantly increased through chemical treatments alone or in combination with twin‐screw extrusion.

Improving the physicochemical properties of partially enhanced soluble dietary fiber through innovative techniques: A coherent review

Plant-based foods have a considerable quantity of bioactive moieties which provide nutritional benefits. Literature demonstrated that intake of a dietary fiber-rich diet has positive impacts on human health. Moreover, several studies have indicated that a high intake of soluble dietary fiber is associated with a reduced risk of numerous chronic aberrations as compared to insoluble dietary fiber. For the purpose, special attention has been paid toward enhancement of soluble dietary fiber in foods through different innovative techniques. In this review, efforts are directed to elaborate the importance of dietary fiber and to highlight the significance of conversion of insoluble dietary fiber into soluble dietary fiber. Soluble dietary fiber are functionally and nutritionally more important than insoluble dietary fiber. Moreover, much has been focused on the solubilization of dietary fibers through different techniques that ameliorates the quantity of soluble dietary fiber. An array of different techniques and methods are used such as mechanical degradation, extrusion cooking, thermal processes, chemical treatment, enzymatic methods, microbiological fermentation, and some other processes. Furthermore, physicochemical and functional perspectives of soluble dietary fiber are also the limelight of the article. Practical applications The current study is aimed to overview the functional importance and modification of dietary fiber through different techniques. Owing to water solubility, soluble dietary fibers are more important than insoluble dietary fiber in terms of gastrointestinal role, cholesterol lowering effect, weight management, improved immunity, and mood enhancement and have a positive role in product development. Therefore, modification is much important for an industrial and health point of view as it generates physicochemical changes in dietary fiber which improve bioactive functionality. As good source of soluble dietary fiber, treated foods, especially cereals, can be incorporated in products/baking products to make these functional against various diseases because consumers are more conscious toward their diet and wish for natural remedies.

Modification of dietary fibers from purple-fleshed potatoes ( Heimeiren ) with high hydrostatic pressure and high pressure homogenization processing: A comparative study

Abstract In this study, we evaluated the effects of high hydrostatic pressure (HHP) and high pressure homogenization (HPH) treatments on the physicochemical, functional, and structural properties of dietary fibers (DFs) obtained from purple-fleshed potatoes. DFs subjected to HHP and HPH exhibited increased content of soluble dietary fiber. HHP and HPH treatments did not improve water holding capacity, but increased oil holding and swelling capacities, and emulsion activity and stability. DFs treated with HPH showed the increased antioxidant activities (DPPH 0.89, ABTS 2.65, FRAP 3.39 mg Trolox/g DF), content of total phenol, and α-glucosidase inhibition (98.3%). HHP and HPH treatments changed monosaccharide compositions and structural characteristics of DFs. Therefore, DFs from purple-fleshed potatoes could be used as a fiber-rich ingredient in functional foods, and HPH was more useful in the modification of dietary fiber than HHP at the same treatment conditions. Industrial relevance : This article deals with the modification of dietary fibers from purple-fleshed potatoes ( Heimeiren ) with HHP and HPH treatments. Results suggest that HPH treated dietary fiber showed a higher ratio of soluble fraction, increased physicochemical and functional properties than HHP at 200 MPa. There outcomes could help the food industry identify the optimal high pressure processing type to improve physicochemical and functional properties of dietary fiber.

Modification and Application of Dietary Fiber in Foods

Dietary fiber plays an important role in human health. The modification and application of dietary fiber in foods is reviewed with respect to definition and classification and methods for measurement, extraction, and modification of dietary fiber. The supplementation of dietary fiber for flour, meat, and dairy products is also reviewed. Finally, the benefits and risks of increasing consumption of dietary fiber are discussed.

Chemical composition and physicochemical properties of barley dietary fiber by chemical modification

Chemical modification of dietary fiber (DF), extracted from whole grain barley, was carried out to obtain cross-linked (CL) DF, carboxymethyl (CM) DF, and hydroxypropyl (HP) DF. The DF components, physicochemical properties, and subsequent influence on the in vitro digestibility of wheat starch gels were comparatively investigated. The redistribution of fiber components from chemically modified DF was observed. An increase in the total DF (TDF) content of CL- and HP-DF was observed, which was mainly due to an increase of insoluble DF. Carboxymethylation led to an appreciable increase of soluble DF (1.17–6.20%) but TDF contents slightly decreased. Chemical modification of barley DF led to increases in arabinose (7.1–11.5%) and xylose (10.7–17.5%), but glucose contents decreased (67.4–79.9%). The treatments, especially carboxymethylation, effectively (P<0.05) increased hydration properties (e.g. water solubility, swelling power, and water absorption index). Substitution of 5% wheat starch with CL-, and HP-DF led to decreased in vitro digestibility in comparison to the control starch. Our results suggest that chemical modification improve the DF characteristics of barley and to exploit its potential application as a functional ingredient in fiber-rich products.

Study on Modification of Dietary Fiber from Wheat Bran

The modification of the pretreated wheat bran by extrusion technology and cellulose enzyme method was studied to improve the content of soluble dietary fiber and enhance product functionality. First ,the pretreated dietary fiber (DF1) was modified by extrusion technology to get DF2,then DF2 were modified by enzymolysis of cellulose enzyme . The results showed as fowllow: the optimum conditions for extrusion modification was 45% material moisture content, 25 r•min-1 feeding speed, 200 r•min-1screw speed, 70-90-110-130-150°Cextrusion temperature, and the SDF content of DF2 is 33.95%. the optimal enzymatic modification conditions for DF2 was 1:0solid-liquid ratio, 30U/g enzyme adding, 4h enzymatic hydrolysis time.

Effect of a High-Fiber Diet vs a Fiber-Supplemented Diet on C-Reactive Protein Level

Diets high in fiber are associated with lower levels of inflammatory markers. This study examined the reduction in inflammation from a diet supplemented with fiber compared with a diet naturally high in fiber. Randomized crossover intervention trial of 2 diets, a high-fiber (30-g/d) Dietary Approaches to Stop Hypertension (DASH) diet or fiber-supplemented diet (30 g/d), after a baseline (regular) diet period of 3 weeks. There were 35 participants (18 lean normotensive and 17 obese hypertensive individuals) aged 18 to 49 years. The study included 28 women and 7 men; 16 (46%) were black, the remainder white. The mean (SD) fiber intake on baseline diets was 11.9 (0.3) g/d; on the high-fiber DASH diet, 27.7 (0.6) g/d; and on the supplemented diet, 26.3 (0.4) g/d. Overall, the mean C-reactive protein (CRP) level changed from 4.4 to 3.8 mg/L (-13.7%; P = .046) in the high-fiber DASH diet group and to 3.6 mg/L (-18.1%) in the fiber-supplemented diet group (P = .03). However, CRP levels decreased in the 18 lean normotensive participants in either intervention diet group (2.0 mg/L [baseline] vs 1.4 mg/L [high-fiber DASH] vs 1.2 mg/L [supplemented]); P<.05) but did not change significantly (7.1 mg/L [baseline] vs 6.2 mg/L [high-fiber DASH] vs 6.5 mg/L [supplemented]; P>.05) in obese hypertensive participants. Neither age nor race influenced the response of CRP levels to the diets. No evidence of a crossover effect was detected. The results demonstrate that fiber intake of about 30 g/d) from a diet naturally rich in fiber or from a supplement can reduce levels of CRP. Further research is needed to more clearly elucidate the differential effect seen in lean vs obese individuals and whether modification of dietary fiber may be helpful in modulating inflammation and its consequent cardiovascular consequences.