Moderate Contact Research Articles

Enteroparasitoses and Toxocarosis Affecting Children from Mar del Plata City, Argentina

This study evaluated the existence of enteroparasitoses and toxocarosis in children of peripheral (PC) and urban communities (UC) from Mar del Plata city (Argentina) and their associations with socio-environmental conditions. A Parasite Vulnerability Index (PVI) was elaborated using variables such as overcrowding, floor type, drinking water source, wastewater disposal, solid waste disposal, presence of animals and schooling level. The PC evidenced statistically significant higher frequencies of families with high (38.9%) and medium (55.5%) PVI, while in the UC low PVI (93%) was the most frequent. A statistically significant higher frequency of PC children was parasitized (30.2 vs. 14.5%; χ 2 Pearson=5.21; P<0.05), presented higher parasite frequencies, specific richness, parasitic loads, and they also evidenced polyparasitism. The Multiple Correspondence Analysis (MCA) showed associations between PC-parasitized children, overcrowding and contact with pets and farm animals. The ELISA test to the specified determination of Toxocara canis IgG was reactive in a statistically significant higher proportion of PC children than the UC (55 vs. 8.5%; χ 2=30.5; P<0.01). The MCA associated PC reactive children, not adequate hand washing, moderate and hypereosinophilia and contact with pets and farm animals. Deficient socio-environmental conditions became children more vulnerable to get enteroparasitoses and toxocarosis in the PC than in the UC.

Detailed finite element method modeling of evaporating multi-component droplets

The evaporation of sessile multi-component droplets is modeled with an axisymmetic finite element method. The model comprises the coupled processes of mixture evaporation, multi-component flow with composition-dependent fluid properties and thermal effects. Based on representative examples of water–glycerol and water–ethanol droplets, regular and chaotic examples of solutal Marangoni flows are discussed. Furthermore, the relevance of the substrate thickness for the evaporative cooling of volatile binary mixture droplets is pointed out. It is shown how the evaporation of the more volatile component can drastically decrease the interface temperature, so that ambient vapor of the less volatile component condenses on the droplet. Finally, results of this model are compared with corresponding results of a lubrication theory model, showing that the application of lubrication theory can cause considerable errors even for moderate contact angles of 40°.

Comparison of Ti/Pd/Ag, Pd/Ti/Pd/Ag and Pd/Ge/Ti/Pd/Ag contacts to n-type GaAs for electronic devices handling high current densities

In the quest for metal contacts for electronic devices handling high current densities, we report the results of Pd/Ti/Pd/Ag and Pd/Ge/Ti/Pd/Ag contacts to n-GaAs and compare them to Ti/Pd/Ag and AuGe/Ni/Au. These metal systems have been designed with the goal of producing an electrical contact with (a) low metal–semiconductor specific contact resistance, (b) very high sheet conductance, (c) good bondability, (d) long-term durability and (e) cost-effectiveness. The structure of the contacts consists of an interfacial layer (either Pd or Pd/Ge) intended to produce a low metal–semiconductor specific contact resistance; a diffusion barrier (Ti/Pd) and a thick top layer of Ag to provide the desired high sheet conductance, limited cost and good bondability. The results show that both systems can achieve very low metal resistivity (ρM ∼ 2 × 10−6 Ω cm), reaching values close to that of pure bulk silver. This fact is attributed to the Ti/Pd bilayer acting as an efficient diffusion barrier, and thus the metal sheet resistance can be controlled by the thickness of the deposited silver layer. Moreover, the use of Pd as interfacial layer produces contacts with moderate specific contact resistance (ρC ∼ 10−4 Ω cm2) whilst the use of Pd/Ge decreases the specific contact resistance to ρC ∼ 1.5 × 10−7 Ω cm2, as a result of the formation of a Pd4(GaAs, Ge2) compound at the GaAs interface.

Nanostructure-Textured Surfaces with Low Friction and High Deformation Resistance

ABSTRACTNanotextured surfaces can effectively reduce friction and adhesion, especially in applications with micro- and nanoscale contact interactions. However, for these surfaces, a common weakness is a lack of structural integrity of the individual nanotextures when subjected to contact loading, resulting in permanent deformation at even the moderate contact forces encountered in microscale systems. Nanostructure-textured surfaces (NSTSs), composed of arrays of novel Al/a-Si core–shell nanostructures (CSNs), have been developed with a desirable combination of low friction and high deformation resistance. When subjected to nanoscratch testing, these surfaces are shown to have extremely low coefficients of friction (as low as ∼0.015), as well as no detectable nanostructure deformation at contact forces up to 8,000 μN (estimated contact pressure greater than 1 GPa). In addition, the NSTSs have low adhesion (pull-off) forces on the order of less than 1 μN. The unique properties of these NSTSs provide avenues for designing low-friction, deformation-resistant surfaces that could benefit a variety of fields, including micro/nanoelectromechanical systems (MEMS/NEMS), microelectronics, magnetic recording, or any other application where the mechanical integrity of nanostructures is important.

Superoleophilic Titania Nanoparticle Coatings with Fast Fingerprint Decomposition and High Transparency.

Low surface tension sebaceous liquids such as human fingerprint oils are readily deposited on high energy surfaces such as clean glass, leaving smudges that significantly lower transparency. There have been several attempts to prevent formation of these dactylograms on glass by employing oil-repellent textured surfaces. However, nanotextured superoleophobic coatings typically scatter visible light, and the intrinsic thermodynamic metastability of the composite superoleophobic state can result in failure of the oil repellency under moderate contact pressure. We develop titania-based porous nanoparticle coatings that are superoleophilic and highly transparent and which exhibit short time scales for decomposition of fingerprint oils under ultraviolet light. The mechanism by which a typical dactylogram is consumed combines wicking of the sebum into the nanoporous titania structure followed by photocatalytic degradation. We envision a wide range of applications because these TiO2 nanostructured surfaces remain photocatalytically active against fingerprint oils in natural sunlight and are also compatible with flexible glass substrates.

Stable giant vortex annuli in microwave-coupled atomic condensates

Stable self-trapped vortex annuli (VAs) with large values of topological charge S (giant VAs) are not only a subject of fundamental interest, but are also sought for various applications, such as quantum information processing and storage. However, in conventional atomic Bose-Einstein condensates (BECs) VAs with S>1 are unstable. Here, we demonstrate that robust self-trapped fundamental solitons (with S=0) and bright VAs (with the stability checked up to S=5), can be created in the free space by means of the local-field effect (the feedback of the BEC on the propagation of electromagnetic waves) in a condensate of two-level atoms coupled by a microwave (MW) field, as well as in a gas of MW-coupled fermions with spin 1/2. The fundamental solitons and VAs remain stable in the presence of an arbitrarily strong repulsive contact interaction (in that case, the solitons are constructed analytically by means of the Thomas-Fermi approximation). Under the action of the moderate attractive contact interaction which, by itself, would lead to collapse, the fundamental solitons and VAs exist and are stable, respectively; it is interesting that higher-order VAs are more robust than their lower-order couterparts, on the contrary to what is known in other systems that may support stable self-trapped vortices. Conditions for the experimental realizations of the VAs are discussed.

High Awareness but Low Coverage of a Locally Produced Fortified Complementary Food in Abidjan, Côte d'Ivoire: Findings from a Cross-Sectional Survey.

Poor complementary feeding practices among infants and young children in Côte d’Ivoire are major contributing factors to the country’s high burden of malnutrition. As part of a broad effort to address this issue, an affordable, nutritious, and locally produced fortified complementary food product was launched in the Côte d’Ivoire in 2011. The objective of the current research was to assess various levels of coverage of the program and to identify coverage barriers. A cross-sectional household survey was conducted among caregivers of children less than 2-years of age living in Abidjan, Côte d’Ivoire. Four measures of coverage were assessed: “message coverage” (i.e., has the caregiver ever heard of the product?), “contact coverage” (i.e., has the caregiver ever fed the child the product?), “partial coverage” (i.e., has the caregiver fed the child the product in the previous month?), and “effective coverage” (i.e., has the caregiver fed the child the product in the previous 7 days?). A total of 1,113 caregivers with children between 0 and 23 months of age were interviewed. Results showed high message coverage (85.0%), moderate contact coverage (37.8%), and poor partial and effective coverages (8.8% and 4.6%, respectively). Product awareness was lower among caregivers from poorer households, but partial and effective coverages were comparable in both poor and non-poor groups. Infant and young child feeding (IYCF) practices were generally poor and did not appear to have improved since previous assessments. In conclusion, the results from the present study indicate that availability on the market and high awareness among the target population is not sufficient to achieve high and effective coverage. With market-based delivery models, significant efforts are needed to improve demand. Moreover, given the high prevalence of malnutrition and poor IYCF practices, additional modes of delivering IYCF interventions and improving IYCF practices should be considered.

αβ T cell receptor germline CDR regions moderate contact with MHC ligands and regulate peptide cross-reactivity.

αβ T cells respond to peptide epitopes presented by major histocompatibility complex (MHC) molecules. The role of T cell receptor (TCR) germline complementarity determining regions (CDR1 and 2) in MHC restriction is not well understood. Here, we examine T cell development, MHC restriction and antigen recognition where germline CDR loop structure has been modified by multiple glycine/alanine substitutions. Surprisingly, loss of germline structure increases TCR engagement with MHC ligands leading to excessive loss of immature thymocytes. MHC restriction is, however, strictly maintained. The peripheral T cell repertoire is affected similarly, exhibiting elevated cross-reactivity to foreign peptides. Our findings are consistent with germline TCR structure optimising T cell cross-reactivity and immunity by moderating engagement with MHC ligands. This strategy may operate alongside co-receptor imposed MHC restriction, freeing germline TCR structure to adopt this novel role in the TCR-MHC interface.

Hydrolytic conversion of preceramic polymers into silicate glass coatings with different wettability

In this paper, two types of preceramic polymers were used to form silicate glass coatings with different wettability via hydrolysis either under harsh or mild conditions. Allylhydridopolycarbosilane (AHPCS) and polyvinylsilazane (PVSZ) were spin-coated on Si substrate and consolidated by photo- and thermal-curing and subjected to hydrolysis for conversion to the silicate glass phase. The contact angle of the both hydrophobic cured polymers decreased from 91°–92° to 18°–36° with little difference, when hydrolyzed in strong alkaline of NaOH solution at room temperature. However, soft hydrolysis in ammonia vapor at 80 °C showed that the AHPCS derived silicate surface showed the moderate contact angle 58°, while the PVSZ derived silicate became very hydrophobic surface with the contact angle 103° presumably due to re-oriented alkyl groups. Eventually, it was demonstrated that the surface wettability of the hydrolyzed silicates was controlled with the polymer chemistry and the hydrolytic conditions upon the preceramic polymer-to-silica conversion.

Effect of contact- and sliding-mode electrification on nanoscale charge transfer for energy harvesting

The process of charge transfer based on triboelectrification (TE) and contact electrification (CE) has been recently utilized as the basis for a new and promising energy harvesting technology, i.e., triboelectric nanogenerators, as well as selfpowered sensors and systems. The electrostatic charge transfer between two surfaces can occur in both the TE and the CE modes depending on the involvement of relative sliding friction. Does the sliding behavior in TE induce any fundamental difference in the charge transfer from the CE? Few studies are available on this comparison because of the challenges in ruling out the effect of the contact area using traditional macro-scale characterization methods. This paper provides the first study on the fundamental differences in CE and TE at the nanoscale based on scanning probe microscopic methods. A quantitative comparison of the two processes at equivalent contact time and force is provided, and the results suggest that the charge transfer from TE is much faster than that from CE, but the saturation value of the transferred charge density is the same. The measured frictional energy dissipation of ∼11 eV when the tip scans over distance of 1 A sheds light on a potential mechanism: The friction may facilitate the charge transfer process via electronic excitation. These results provide fundamental guidance for the selection of materials and device structures to enable the TE or the CE in different applications; the CE mode is favorable for frequent moderate contact such as vibration energy harvesting and the TE mode is favorable for instant movement such as harvesting of energy from human walking.

Filamentary superhydrophobic Teflon surfaces: Moderate apparent contact angle but superior air-retaining properties

HypothesisMicro-scale textured Teflon surfaces, resulting from plasma etching modification, show extremely high water contact angle values and fairly good resistance to water penetration when hit by water drops at medium-high speed. This behavior is more pronounced when these surfaces present denser and smaller micrometric reliefs. Tailoring the top of these reliefs with a structure which further stabilizes the air may further increase resistance to wetting (water penetration) under static and dynamic conditions. ExperimentsConditions of the oxygen fed plasma were tuned in order to explore the possibility of obtaining differently topped structures on the surface of the polymer. Scanning Electron Microscopy (SEM) was used to explore topography and X-ray Photoelectron Spectroscopy (XPS) to assess chemical similarity of the modified surfaces. Beside the usual advancing and receding water contact angle (WCA) measurements, surfaces were subjected to high speed impacting drops and immersion in water. FindingsAt milder, i.e. shorter time and lower input power, plasma conditions formation of peculiar filaments is observed on the top of the sculpted reliefs. Filamentary topped surfaces result in a lower WCA than the spherical ones, appearing in this sense less superhydrophobic. However, these surfaces give rise to the formation of a more pronounced air layer when placed underwater. Further, when hit by water drops falling at medium/high speed, they show a higher resistance to water penetration and a sensitively lower surface-liquid contact time. The contact time is as low as previously observed only on heated solids. This behavior may be ascribed to the cavities formed beneath the filaments which, similarly with the salvinia leaf structures, require a surplus of pressure to be filled by water. Also, it suggests a different concept of superhydrophobicity, which cannot be expected on the basis of the conventional water contact angle characterization.

Highly cytocompatible and flexible three-dimensional graphene/polydimethylsiloxane composite for culture and electrochemical detection of L929 fibroblast cells.

Recently, three-dimensional graphene interconnected network has attracted great interest as a scaffold structure for tissue engineering due to its high biocompatibility, high electrical conductivity, high specific surface area and high porosity. However, free-standing three-dimensional graphene exhibits poor flexibility and stability due to ease of disintegration during processing. In this work, three-dimensional graphene is composited with polydimethylsiloxane to improve the structural flexibility and stability by a new simple two-step process comprising dip coating of polydimethylsiloxane on chemical vapor deposited graphene/Ni foam and wet etching of nickel foam. Structural characterizations confirmed an interconnected three-dimensional multi-layer graphene structure with thin polydimethylsiloxane scaffold. The composite was employed as a substrate for culture of L929 fibroblast cells and its cytocompatibility was evaluated by cell viability (Alamar blue assay), reactive oxygen species production and vinculin immunofluorescence imaging. The result revealed that cell viability on three-dimensional graphene/polydimethylsiloxane composite increased with increasing culture time and was slightly different from a polystyrene substrate (control). Moreover, cells cultured on three-dimensional graphene/polydimethylsiloxane composite generated less ROS than the control at culture times of 3-6 h. The results of immunofluorescence staining demonstrated that fibroblast cells expressed adhesion protein (vinculin) and adhered well on three-dimensional graphene/polydimethylsiloxane surface. Good cell adhesion could be attributed to suitable surface properties of three-dimensional graphene/polydimethylsiloxane with moderate contact angle and small negative zeta potential in culture solution. The results of electrochemical study by cyclic voltammetry showed that an oxidation current signal with no apparent peak was induced by fibroblast cells and the oxidation current at an oxidation potential of +0.9 V increased linearly with increasing cell number. Therefore, the three-dimensional graphene/polydimethylsiloxane composite exhibits high cytocompatibility and can potentially be used as a conductive substrate for cell-based electrochemical sensing.

Electrical stimulation towards melanoma therapy via liquid metal printed electronics on skin.

BackgroundWe proposed a method of using electrical stimulation for treatment of malignant melanoma through directly spray-printing liquid metal on skin as soft electrodes to deliver low intensity, intermediate frequency electric fields.MethodsWith patterned conductive liquid metal components on mice skin and under assistance of a signal generator, a sine wave electrical power with voltage of 5 V and 300 kHz could be administrated on treating malignant melanoma tumor.FindingsThe experiments demonstrated that tumor volume was significantly reduced compared with that of the control group. Under the designed parameters (signal: sine wave, signal amplitude Vpp: 5 V and Vpp: 4 V, frequency: 300 kHz) of Tumor treating fields (TTFields) with the sprayed liquid metal electrode, four mice tumor groups became diminishing after 1 week of treatment. The only device-related side effect as seen was a mild to moderate contact dermatitis underneath the field delivering electrodes. The SEM images and pathological analysis demonstrated the targeted treating behavior of the malignant melanoma tumor. Further, thermal infrared imaging experiments indicated that there occur no evident heating effects in the course of treatment. Besides, the liquid metal is easy to remove through medical alcohol.ConclusionsTumor treating fields through liquid metal electrode could offer a safe, straightforward and effective treatment modality which evidently slows down tumor growth in vivo. These promising results also raised the possibility of applying spray-printing TTFields as an easy going physical way for future cancer therapy.

The Influence of Different Level of Service Characteristics and Personal Involvement towards Consumer Relational Response Behaviors

The purpose of this study is to empirically test the relationship between consumer personal involvement and perceived relational benefit in different industries that poses different level of customer contact. Examination on the influence of perceived relational benefit towards consumer relational response behavior was also conducted. The study used descriptive causal research design. Based on a sample of 225 customers of three different types of services, using MANOVA and multiple regression analysis, the study found that confidence is the most important benefit that consumers consider in building long term relationship with the service provider. Consumers of high contact services perceived social benefit as the second most important, whereas consumers of moderate contact and low contact services perceived special treatment benefits as the second most important in building long term relationship with the service provider. The study also found that confidence benefit is the predictor of consumer relational response behaviors in high contact, moderate contact and low contact services. Level of consumers’ involvement with the service differentiates consumers’ perceived relational benefits in high contact and moderate contact services, whereas consumers perceive the same relational benefit in low contact services regardless the level of consumers’ involvement with the service.

Trajectories of Early Television Contact in Japan: Relationship with Preschoolers’ Externalizing Problems

We examined the link between trajectories of television contact time at ages 1–5 and externalizing problems at age 5, using data from a Japanese longitudinal study of media use and child development (N = 1,189). Despite the American Academy of Pediatrics recommendation for no television contact before age 2, growth mixture modeling identified 3 trajectory classes, comprising heavy-start contact (8%, mean contact time at age 0 = 331.44 min/day), characterized by remarkably long television contact time in infancy and maintenance of longer contact, while mild contact (51%, 147.57 min/day) and moderate contact (41%, 236.64 min/day) had relatively shorter contact in infancy and moderate declines in later years. The findings suggest that both infant temperamental difficulties and family characteristics predicted trajectory classification of television contact time. Scores for attention problems and conduct problems at age 5 did not significantly differ among trajectory groups, nor did regression coefficients.

Measurement of cell-substrate impedance and characterization of cancer cell growth kinetics with mathematical model

Non-invasive cell-substrate impedance sensing technique was used to monitor cancer cell attachment, spreading and proliferation as function of culture time. Impedance values were measured with cells cultured on collagen coated surface which exhibited moderate contact angle (54.5) and positively charge surface with the zeta potential (ζ) of +3.91 mV. Impedance was gradually increased and reached steady state after 2.6 hrs and 2.9 hrs with different impedance for SCC7 (2.7 Ω) and HeLa cells (1.1 Ω) respectively. Modified Gompertz mathematical growth model was used to determine growth kinetics, and showed maximum growth rate (μm) for SCC7 (7.9×10−4 hr−1) and HeLa cells (2×10−5 hr−1) as well as both cells showed exponential increase of impedance following the lag period (λ) which required for cells to recover from the trypsinization and initiate attaching on electrode surface. The duration of lag period for SCC7 (0.7 hr) and HeLa cells (0.25 hrs ) demonstrated that HeLa cells exit lag period earlier than SCC7 cells and enter exponential growth which supports the rapid attachment and spread on substrate. Our result supported that the impedance measurement revealed cell-type specific growth characteristics and electrophysical properties that would be used to determine meaningful fingerprint for cancer cell study.

Exploring an alternative aqueous lubrication concept for biomedical applications: Hydration lubrication based on O/W emulsions combined with graphene oxide

Water-based lubrication concepts are of high interest for applications that require friction and wear control in a bio-medical environment. In this work, a concept of aqueous lubrication is presented based on hydration of surface active polymers combined with graphene oxide. Three different kinds of surface-active polymers with or without graphene oxide were coated on a CoCrMo alloy surface, and the samples were characterized by ATR and XPS. Hydration lubrication was created from a tailored oil-in-water (O/W) emulsion. Enhanced friction reducing capability was found for the polymeric coatings in combination with graphene oxide. The tribological behaviour of a PEG-lactide coating in emulsion was better than that of PEG coating, indicating the advantage of using hydrophilic and lipophilic group containing surface-active polymers for emulsion lubrication. The overall maximum reduction in friction that was achieved for a sliding contact of coated engineering surfaces from CoCrMo at low sliding velocity and moderate contact pressure was of about 63% compared to uncoated CoCrMo sliding in water at the same operational conditions.

Chemical Composition and Insecticidal Activity of Essential Oils from Zanthoxylum dissitum Leaves and Roots against Three Species of Storage Pests.

This work aimed to investigate chemical composition of essential oils obtained from Zanthoxylum dissitum leaves and roots and their insecticidal activities against several stored product pests, namely the cigarette beetle (Lasioderma serricorne), red flour beetle (Tribolium castaneum) and black carpet beetle (Attagenus piceus). The analysis by GC-MS of the essential oils allowed the identification of 28 and 22 components, respectively. It was found that sesquiterpenoids comprised a fairly high portion of the two essential oils, with percentages of 74.0% and 80.9% in the leaves and roots, respectively. The main constituents identified in the essential oil of Z. dissitum leaves were δ-cadinol (12.8%), caryophyllene (12.7%), β-cubebene (7.9%), 4-terpineol (7.5%) and germacrene D-4-ol (5.7%), while humulene epoxide II (29.4%), caryophyllene oxide (24.0%), diepicedrene-1-oxide (10.7%) and Z,Z,Z-1,5,9,9-tetramethyl-1,4,7-cycloundecatriene (8.7%) were the major components in the essential oil of Z. dissitum roots. The insecticidal activity results indicated that the essential oil of Z. dissitum roots exhibited moderate contact toxicity against three species of storage pests, L. serricorne, T. castaneum and A. piceus, with LD50 values of 13.8, 43.7 and 96.8 µg/adult, respectively.

The role of vaccination coverage, individual behaviors, and the public health response in the control of measles epidemics: an agent-based simulation for California.

BackgroundMeasles cases continue to occur among susceptible individuals despite the elimination of endemic measles transmission in the United States. Clustering of disease susceptibility can threaten herd immunity and impact the likelihood of disease outbreaks in a highly vaccinated population. Previous studies have examined the role of contact tracing to control infectious diseases among clustered populations, but have not explicitly modeled the public health response using an agent-based model.MethodsWe developed an agent-based simulation model of measles transmission using the Framework for Reconstructing Epidemiological Dynamics (FRED) and the Synthetic Population Database maintained by RTI International. The simulation of measles transmission was based on interactions among individuals in different places: households, schools, daycares, workplaces, and neighborhoods. The model simulated different levels of immunity clustering, vaccination coverage, and contact investigations with delays caused by individuals’ behaviors and/or the delay in a health department’s response. We examined the effects of these characteristics on the probability of uncontrolled measles outbreaks and the outbreak size in 365 days after the introduction of one index case into a synthetic population.ResultsWe found that large measles outbreaks can be prevented with contact investigations and moderate contact rates by having (1) a very high vaccination coverage (≥ 95%) with a moderate to low level of immunity clustering (≤ 0.5) for individuals aged less than or equal to 18 years, or (2) a moderate vaccination coverage (85% or 90%) with no immunity clustering for individuals (≤18 years of age), a short intervention delay, and a high probability that a contact can be traced. Without contact investigations, measles outbreaks may be prevented by the highest vaccination coverage with no immunity clustering for individuals (≤18 years of age) with moderate contact rates; but for the highest contact rates, even the highest coverage with no immunity clustering for individuals (≤18 years of age) cannot completely prevent measles outbreaks.ConclusionsThe simulation results demonstrated the importance of vaccination coverage, clustering of immunity, and contact investigations in preventing uncontrolled measles outbreaks.Electronic supplementary materialThe online version of this article (doi:10.1186/s12889-015-1766-6) contains supplementary material, which is available to authorized users.

Social support of mentally retarded persons

Purpose: The aim of this work is to assess the relationship between the environment and mentally retarded persons. Material and methods: Information referring to social support of mentally retarded persons is a source material collected on the base of the data included in the Polish and foreign literature. The issues under discussion related to the following problems: social integration of persons with intellectual disabilities in a family and local environment, social functioning of people with mild intellectual disability, social rehabilitation of people with moderate, severe and profound intellectual disability and specific contact with people with disabilities. Results: For a person with an intellectual disability, the family is the source of acquisition of basic social skills that give him the opportunity for further development and performing certain social roles in a sense of safety. Full acceptance of the intellectually disabled, may dismiss their sense of shame and fear, and instill the satisfaction of belonging to a social community. Conclusions: Full social acceptance of people with intellectual disabilities is the basis for their assimilation and social functioning.