Mode Of Treatment Research Articles

Assessment of particulate Zn and Pb sources in the Orne watershed (Northeast France) using geochemical tools.

The Orne River, a tributary of the Moselle River, was highly impacted by industrial activities for more than one century. Land use along the Orne River is highly contrasted, with local specificity from its source to its junction with the Moselle River. The intense industrial activity left behind tons of steelmaking wastes (SMW) on the land surface and within the Orne riverbed. To assess the sources of particulate Zn and Pb transported as suspended sediment in the Orne River, different sets of samples from likely Zn- and Pb-bearing particle sources within the Orne watershed were collected. Three sets of samples were taken from potential sources representing detrital, urban, and inherited industrial particles. Mineralogy, element contents, and Zn and Pb isotope compositions were obtained to characterize and reveal the fingerprint of each set of samples. Soil samples were collected on distinct geomorphological areas characterized by different soil types and land uses. They all display detrital minerals assigned to the geological background. Urban dusts and steelmaking residues display specific mineral phases (sulfates and iron oxides, respectively). Element compositions present strong discrepancies between the distinct sets of samples. SMWs are particularly enriched in Fe, Zn, and Pb. Concerning isotopic composition, SMWs exhibit δ66Zn values ranging from - 0.67 to 1.66‰. Urban samples display δ66Zn values between - 0.11 and 0.13‰, and soils present δ66Zn values between - 0.24 and 0.47‰. The 206Pb/204Pb ratio was estimated to range from 17.550 to 18.807 for soils, from 17.973 to 18.219 for urban samples, and from 18.313 to 18.826 for SMWs. For each of the three sets of samples (soils, urban, industrial), variations of geochemical fingerprint were observed. For soils, the relatively large variations of Zn and Pb isotopic compositions were attributed to distinct land use and the contribution of atmospheric deposition. For industrial samples, the variations were more intense and may be attributed either to distinct industrial processes in the production of pig iron or to distinct furnace-flume treatment modes. The three sets of samples (urban, industrial, and detrital) could be distinguished based on Zn and Pb contents and isotopes. Finally, this study not only highlighted the sources that released particulate Zn and Pb into the Orne River system, it also demonstrated that urban particles are well defined in terms of Zn and Pb isotopic signatures, and those isotopic signatures could be extrapolated to other case studies.

Immunotherapy approaches for managing allergic conditions in children – A narrative review

Allergic reactions in children are a major concern globally. The ever-changing environment, exposure to new and chemically altered compounds, genetically modified food products, variations in hygiene parameters, and most importantly, questionable immunity, together influence the pattern of allergic diseases in children. The most favorable and convenient mode of treatment sought is the use of over-the-counter drugs like antihistamines. However, they tend to lose their efficacy when used over a long period of time. Immunotherapy, for the management of allergic conditions, is considered a gold standard and is still a promising tool. Subcutaneous immunotherapy and sublingual immunotherapy together comprise the two modes of allergen-specific immunotherapy. Each method differs in its mode of administration and role in allergic diseases, in terms of, efficacy and safety measures. The choice between the two is dependent on the type of allergic disease and personal preferences opted either by the specific patient, or by the health-care professional involved in the treatment. The convenience of administration and compliance are also major grounds to consider while opting for the most appropriate mode of treatment. This review hence highlights new advancements in the field of immunotherapy, the efforts to achieve the goals envisioned and literature focusing on better outcomes in managing allergic reactions.

Outcome of Honey and Ghee Dressing as Compared to Regular Dressing Materials: A Comparative Study

Background: Ghee and honey has been advocated and used as dressing for infected wounds by Sushruta (600BC). The gratifying results observed with the dressing have prompted this study which aims to establish its efficacy in chronic infected wounds over one year period A standardised ghee and honey dressing was used to treat: chronic post- operative wounds and infected per op wounds, Honey and ghee dressing markedly reduces the foul odour and discharge, significantly improving the quality of life. The study will tell us comparative result of honey and ghee dressing as compared to expensive vacuum dressing and the regular dressing materials. Innumerable Randomised Control Trials (RCTs) reported on honey dressing for infected wounds, there is substantial evidence that ghee and honey dressing has at least comparable results to other modes of treatment. The easy availability and low cost of this treatment makes it significant in developing countries. Specially in rural population, Required permission has been from the HOD of orthopaedics. Material and Methods: Total 20 patients with compound fracture and chronic infected wound, were studied during the period of March 2023 to June 2023 at BVP RMC Loni, Maharashtra. Honey and ghee were taken from a fresh sealed box in 50:50 portion according to size of wound and mixed well then it was applied on the wound directly and covered with gauge and, the dressing was changed is cleaned with sterile normal saline as compared to normal dressing materials ie betadin, povidon iodine ointment, spirit. All Patients data was collected and compiled in Microsoft excel and were statistically analysed using appropriate statistical test using SPSS software. Results: Majority patient were males. Mean duration of wound healing among honey and ghee dressing was 15.3 and of regular dressing was 8.9 days. Conclusion: Honey is one alternative solution that can be used for non-pharmacological therapy. Honey can be used as a topical dressing .........

Impact of a multidisciplinary collaborative nutritional treatment model in patients who are critically ill with neurological disorders: A randomized controlled trial.

Malnutrition is a widespread problem in critically ill patients with neurological disorders. The purpose of this study is to investigate the effect of a multidisciplinary collaborative nutritional treatment mode based on a standardized unit for nutritional support on the outcome metrics in patients with neurological disorders who are critically ill. We enrolled 84 participants who were hospitalized in the intensive care unit (ICU) of Yancheng No. 1 People's Hospital for neurological disorders between June 2018 and December 2021. The participants were randomly assigned to the control group and the test group. The control group received traditional nutritional support, while the test group was treated with a multidisciplinary collaborative nutritional treatment mode based on a standardized unit for nutritional support. We collected the general information, feeding tolerance (FT), nutritional risk score, and laboratory indicators before intervention, after intervention for one week, and after intervention for 2 weeks, and other data of the participants. After the intervention, the test group scored significantly lower than the control group in the incidence of gastroparesis and diarrhea, as well as the NUTRIC score, with statistically significant differences (P< 0.001). The prealbumin levels in the test group increased progressively prior to intervention, after intervention for one week, and after intervention for two weeks. Compared to the control group, the test group had higher prealbumin levels prior to intervention, after intervention for one week, and after intervention for two weeks, with statistically significant differences (P< 0.001). We developed a multidisciplinary collaborative nutritional treatment model based on a standard unit for nutritional support. This model can improve neural function, FT, and pertinent outcome indicators and is generally applicable.

SAVING ENERGY RESOURCES DURING THE HEAT TREATMENT OF CONCRETE DUE TO THE USE OF ADDITIVES

Purpose of the work is heat treatment (steaming) of concrete and reinforced concrete products as an effective method of accelerating concrete hardening. Heat treatment of concrete is one of the most responsible construction processes. There are known cases when, due to the increased temperature of the concrete and large temperature differences, excessive temperature stresses arose, as a result of which cracks were formed. When choosing a method of heat treatment of concrete, you must first consider the possibility of using an energy saving method. Its extension is the introduction of additives – concrete hardening accelerators and cements of increased heat release (fast-acting and high-quality), as well as plasticizers and superplasticizers. Methodology. To reduce the duration of heat treatment or reduce the temperature of isothermal heating, it is proposed to use an additive obtained on the basis of the sludge of metal processing enterprises. The work uses standard research methods to determine the physical and mechanical properties of reinforced concrete and the quality of complex additives in accordance with DSTU 9208:2022, DSTU B V. 2.7-2.7-114-2002, DSTU B V.2.7-215:2009, DSTU B V. 2.7-214:2009. Findings. The effect of a complex slurry-based additive on the properties of reinforced concrete was investigated. The proposed additive increases the strength of concrete in all accepted heat treatment modes compared to the strength of concrete without such an additive. Originality of the obtained results is the following, theoretically substantiated and experimentally confirmed complex additive to concrete based on sludge (cake) of metal processing enterprises. The effect of the additive on the strength characteristics of concrete subjected to heat treatment under different regimes and natural hardening concrete is shown. Practical value. The results of the work are implemented in the production of reinforced concrete products and structures.

COMPUTER SIMULATION OF PRELIMINARY HEAT TREATMENT AND RADIAL-SHEAR ROLLING OF BRASS

This paper presents the results of computer modeling of preliminary heat treatment and radial-shear rolling of L63 brass in the Deform program by cellular automata method. Quenching and annealing were simulated as pre-heat treatment modes. Radial-shear rolling consisted of three passes with a compression of 3 mm per pass. The variable parameters were the roll rotation speed (40 rpm, 70 rpm and 100 rpm) and the workpiece heating temperature before rolling (500°C and 700°C). It was found that the most effective mode of preliminary heat treatment of L63 brass is annealing at a temperature of 500°C. The most rational value of the heating temperature of the workpiece before rolling is 500°C, since in this case, at all selected speeds the recrystallization process does not start, which contributes to intensive grain grinding. An increase of roll rotation speed causes additional deformation heating, which contributes to recrystallization and a decrease of grain grinding intensity.

METHODOLOGY AND EQUIPMENT FOR RESEARCHING CORROSION CRACKING PROCESSES IN CASTING ALLOYS

Corrosion cracking is the destruction of metal under static stresses and an aggressive environment. Corrosion fatigue is destruction of the metals and the alloys under the impact of cyclic mechanical pressure and aggressive environment simultaneously.Stress corrosion is the least studied and systematized in terms of literature data on the impact of various aggressive environment (type, temperature, and concentration), composition and structure of the material, mode of heat treatment, method of obtaining and cleaning the casting, methodology for determination of corrosion under stress, as well as equipment for carrying out similar studies. The purpose of this paper is to present the methodology and equipment developed for corrosion cracking testing of cast alloys.

Investigation on the cognitive level of Mpox among MSM population in Shenzhen and analysis of the influencing factors in 2023

From June 16 to 30, 2023, men who have sex with men (MSM) who had visited Voluntary Counseling Testing (VCT) clinics in the Luohu, Futian and Nanshan districts of Shenzhen were included in this study to analyze their awareness of Mpox and the influencing factors. The mean age of the 262 MSM was (34.78±8.94) years, with the majority being unmarried (75.2%) and 79.0% confirmed to be infected with HIV. The awareness rates for five primary indicators, current status of Mpox, pathogen and source of infection, mode of transmission, population susceptibility, clinical manifestations and treatment were 68.4%, 84.7%, 60.3%, 87.8%, and 52.5%, respectively. The awareness rates for five secondary indicators, earliest transmission location (44.7%), main mode of transmission (54.2%), role of masks (46.9%), drug accessibility (46.6%), and self-limiting nature (38.2%) were all below 60%. The MSM population in Shenzhen perceived their likelihood of being infected (2.76±1.32) and discriminated against (3.87±1.26) as relatively low. The logistic analysis showed that the high school or vocational school education (OR:3.094, 95%CI:1.180-9.299), college or above education (OR:5.360, 95%CI:2.159-15.501), and higher scores on questions affecting learning or work (OR:2.196, 95%CI:1.409-3.599) were promoting factors for Mpox awareness, while higher scores on questions concerning the possibility of Mpox mortality (OR:0.591, 95%CI:0.432-0.791) was the hindering factor for Mpox awareness.

Recent trends of stem cell therapies in The management of orthopedic surgical challenges.

Emerged health-related problems especially with increasing population and with the wider occurrence of these issues have always put the utmost concern and led medicine to outgrow its usual mode of treatment, to achieve better outcomes. Orthopedic interventions are one of the most concerning hitches, requiring advancement in several issues, that show complications with conventional approaches. Advanced studies have been undertaken to address the issue, among which stem cell therapy emerged as a better area of growth. The capacity of the stem cells to renovate themselves and adapt into different cell types made it possible to implement its use as a regenerative slant. Harvesting the stem cells, particularly mesenchymal stem cells is easier and can be further grown in vitro. In this review, we have discussed orthopedic-related issues including bone defects and fractures, non-unions, ligament and tendon injuries, degenerative changes, and associated conditions, which require further approaches to execute better outcomes, and the advanced strategies that can be tagged along with various ways of application of mesenchymal stem cells. It aims to objectify the idea of stem cells, with a major focus on the application of Mesenchymal stem cells (MSCs) from different sources in various orthopedic interventions. It also discusses the limitations, and future scopes for further approaches in the field of regenerative medicine. The involvement of mesenchymal stem cells may transition the procedures in orthopedic interventions from predominantly surgical substitution and reconstruction to bio-regeneration and prevention. Nevertheless, additional improvements and evaluations are required to explore the effectiveness and safety of mesenchymal stem cell treatment in orthopedic regenerative medicine.

Gold Nanoparticle Synthesis and its Mode of Action as an Effective Therapy against Breast Carcinoma: Analysis of Traditional Methods and their Comparison with New Methods

Abstract: Breast cancer is one of the most widespread and lethal malignancies afflicting females globally. The global incidence of breast cancer is on the rise, with an anticipated 4.4 million cases by 2070. Notably, breast cancer constitutes approximately 25% of all cancer diagnoses. In the realm of biomedical sciences, nanotechnology has ushered in a transformative era, particularly in cancer therapy and diagnostics. Nanoparticles offer the capability to tailor specific sizes, with elevated surface-to-volume ratios proving advantageous for drug distribution by ensuring a substantial medicines loading volume. Gold nanoparticles exhibit a remarkable selectivity for cancer cells, primarily attributed to the heightened permeability and retaining effects. This study aims to assess the effectiveness of gold nanoparticles in breast cancer therapy, comparing them with traditional techniques from previous research and elucidating their mechanism of action. Data for analysis were sourced from various platforms, including Web of Science and Google Scholar, comprising previously published information. Analysis revealed that historical studies employed conventional techniques for breast cancer therapy. However, contemporary approaches now favor nanomedicine, incorporating diverse drugs and delivery systems, surpassing traditional methods. In summary, nanomedicine emerges as an exceptionally effective mode of breast cancer treatment when juxtaposed with conventional approaches. Previous research also underscores the efficacy of gold nanoparticles as a viable treatment modality. Currently, a spectrum of nanomedicines, including gold nanoparticles, serves as a promising avenue for suppressing tumor development in breast cancer patients

Nanotechnology-Powered Meningitis Therapies: Lipid Nanoparticles Lead the Way.

The meninges serve as a protective layer, and the fluid around the brain and spinal cord can become inflamed, known as meningitis. Lipid-based pharmaceutical formulations, by their high lipophilicity, can negotiate the Blood-Brain Barrier (BBB). The current mode of treatment of meningitis is mainly through antibiotics, which, at best, is partially effective. The success of antibiotic therapy depends on several factors, for example, the difficulty of reaching the infection site, maintaining proper concentrations of the drug after crossing the BBB, and finally, its efficacy in preventing recurrent infection. In this context, interest has focused on organic and inorganic nanostructures for meningitis and transporting antibiotics to the selected region through the BBB. A focus has also been placed on several polymeric nanotechnology techniques for detecting various types of meningitis. This review focuses on nano interventions and their most recent meningitis treatments using nanotechnology.

Ultrasmall copper nanodots eye drops for microenvironment regulation of diabetes retinopathy by relieving hypoxia and inhibiting HIF-1α/VEGF signaling pathway

Diabetic retinopathy (DR) is the main cause of visual loss among blinding diseases. The pathological microenvironment, characterized by hypoxia, reactive oxygen species (ROS) accumulation and oxidative stress, is critical to the onset and progression of DR. In this study, an ultrasmall (4–6 nm) copper nanodots was developed as nanozyme (Cu NZs) and dispersed in 2 % Methocel to formulate Cu NZs eye drops to relieve hypoxia and scavenge excrescent ROS for the effective treatment of DR. Due to its smaller size and higher specific surface area, Cu NZs exposes more active sites and can guarantee excellent antioxidant activity. The results of in vitro studies indicated that Cu NZs had biocompatible and protective effects on human retinal microvascular endothelial cells (HRMECs), alleviating hypoxia in HRMECs, reducing oxidative stress, and inhibiting hypoxia-inducing factor-1α (HIF-1α)/ vascular endotheliogenesis factor (VEGF) signaling pathway. In an animal model of streptozotocin (STZ)-induced DR, Cu NZs eye drops have been shown to greatly relieve the hypoxic microenvironment of DR and inhibit the expression of HIF-1α and VEGF. CuNZs eye drops reduced inflammatory factors in the DR microenvironment, significantly reducing the progression of neovascularization and vascular leakage. And the nano-enzyme eye drops have no toxic side effects on the eyes and important organs of the whole body. This treatment mode based on the nano enzyme cascade reaction from comprehensive microenvironment regulation (hypoxia relief, free radical scavenging, anti-inflammatory), has excellent ability to treat DR. Although the nanoparticle is effective against DR in the short term at the cellular and animal levels, the long-term efficacy and safety remains to be evaluated.

Self-Assembled Fe-Phenolic Acid Network Synergizes with Ferroptosis to Enhance Tumor Nanotherapy.

Natural polyphenolic compound rosmarinic acid (RA) has good antitumor activity. However, the distinctive tumor microenvironment, characterized by low pH and elevated levels of glutathione (GSH), enhances the tolerance of tumors to the singular anti-tumor treatment mode using RA, resulting in unsatisfactory therapeutic efficacy. Targeting nonapoptotic programmed cell death processes may provide another impetus to inhibit tumor growth. RA possesses the capability to coordinate with metal elements. To solve the effect restriction of the above single treatment mode, it is proposed to construct a self-assembled nanocomposite, Fe-RA. Under tumor microenvironment, Fe-RA nanocomposite exerts the characteristics of POD-like enzyme activity and depletion of GSH, producing a large amount of hydroxyl radical (·OH) while disrupting the antioxidant defense system of tumor cells. Moreover, due to the enhanced permeability and retention effect (EPR), Fe-RA can transport Fe2+ to a greater extent to tumor cells and increase intracellular iron content. Causing an imbalance in iron metabolism in tumor cells and promoting cell ferroptosis. The results of the synchrotron X-ray absorption spectroscopy (XAS) and high-resolution mass spectrometry (HRMS) prove the successful complexation of Fe-RA nanocomposite. Density functional theory (DFT) explains the efficient catalytic mechanism of its peroxide-like enzyme activity and the reaction principle with GSH.

Formulation and Evaluation of Ocular in situ Gel of Framycetin Sulfate

The aim of the present study was to formulate and optimize Framycetin sulfate in situ gels for the used for treatment of ocular eye infection .it was formulated as ocular in situ gel forming eye drop are using polymers such as carbopol 940 as a gelling agent in combination of suitable preservatives. It is a newer approach to improve easy to eye instillation residence time and enhance bioavailability, prolonged and sustained drug release. in-situ gel formulation using a suitable phase transition polymer to effectively deliver the drug into eyes with sustained and prolonged release and enhanced drug bioavailability. It is observed from the formulation F3 which shown drug content 96.16 % and have good gelling capacity. Thus, it can be concluded that the drug given in the form of ocular in situ gel of Framycetin sulfate providing better patient compliance and an effective mode of treatment.

Beyond silence: evolving ultrasound strategies in the battle against cardiovascular thrombotic challenges.

Cardiovascular thrombotic events have long been a perplexing factor in clinical settings, influencing patient prognoses significantly. Ultrasound-mediated acoustic therapy, an innovative thrombolytic treatment method known for its high efficiency, non-invasiveness, safety, and convenience, has demonstrated promising potential for clinical applications and has gradually become a focal point in cardiovascular thrombotic disease research. The current challenge lies in the technical complexities of preparing ultrasound-responsive carriers with thrombus-targeting capabilities and high thrombolytic efficiency. Additionally, optimizing the corresponding acoustic treatment mode is crucial to markedly enhance the thrombolytic effectiveness of ultrasound-mediated acoustic therapy. In light of the current status, this article provides a comprehensive review of the research progress in innovative ultrasound-mediated acoustic therapy for cardiovascular thrombotic diseases. It explores the impact of technical methods, therapeutic mechanisms, and influencing factors on the thrombolytic efficiency and clinical potential of ultrasound-mediated acoustic therapy. The review places particular emphasis on identifying solutions and key considerations in addressing the challenges associated with this cutting-edge therapeutic approach.

Analysis of the Effect of Extracorporeal Diaphragmatic Pacing Combined with Noninvasive Ventilator on the Respiratory Function and Prognosis of COPD Patients

Objective: To investigate the effect of extracorporeal diaphragmatic pacing combined with noninvasive ventilators on the respiratory function and prognosis of chronic obstructive pulmonary disease (COPD) patients. Methods: A total of 50 COPD patients were selected between January 2023 to December 2023 and randomly grouped into an observation group and a control group, with 25 cases. The observation group was given extracorporeal diaphragm pacing combined with a noninvasive ventilator, while the control group was given a conventional treatment mode. After the treatment, the results of each index in the two groups were compared. Results: Compared with the diaphragm function indexes of the two groups, the data of the observation group were more dominant (P &lt; 0.05). The rehospitalization rate of the observation group was lower than that of the control group (P &lt; 0.05). The COPD assessment test (CAT) and mMRC (Modified Medical Research Council) Dyspnoea scale scores after treatment between the two groups were significantly different (P &lt; 0.05). Compared with the control group, the lung function indexes of the observation group were more dominant (P &lt; 0.05). Conclusion: Extracorporeal diaphragmatic pacing combined with a noninvasive ventilator promoted the improvement of the patient’s prognosis and improved their respiratory function.

Tibial tuberosity fracture in adult as an unusual pattern of injury

Tibial tuberosity avulsion is an uncommon fracture in adults, such lesions typically seen in adolescent male with well-developed quadriceps, ligaments when they are stronger than growth plate. We described a case of 51-year-old gentlemen had direct trauma to left knee, no risk factors were identified, not able to walk, difficulty in straight leg raise test, radiograph of left knee showed tibial tuberosity avulsion fracture. The fracture was treated with open reduction and internal fixation, f/u with successful rehabilitation which results in good range of motion and excellent function at knee joint. The aim of study is present unusual and rare case of tibial tuberosity Avulsion fracture in adult, early diagnosis, surgical mode of treatment, post-surgery rehabilitation and possible complications.

Effects of Straw Returning on Soil Aggregates and Its Organic Carbon and Nitrogen Retention under Different Mechanized Tillage Modes in Typical Hilly Regions of Southwest China

Tillage modes and straw returning influence soil aggregate stability and the distribution of organic carbon (C) and nitrogen (N) in aggregates of different particle sizes. In the typical hilly regions of southwest China, the predominant soil type is purple soil, characterized by heavy texture and high stickiness, with relatively lower soil fertility compared to other soil types. The improper use of fertilizers and field management practices further exacerbates soil compaction. However, abundant straw resources in the region provide an opportunity for comprehensive straw utilization. The effective utilization of straw resources is of significant importance for stabilizing agricultural ecological balance, improving resource utilization efficiency, and alleviating ecological pressure. Previously, most studies have focused on the impact of different mechanized tillage systems on the physical and chemical properties of soil in hilly areas, while research on the preservation of water-stable aggregates’ organic C and N content remains limited. In this study, the soil properties of fields under a winter pea–summer corn rotation for two years were studied with regards to the effects of straw returning on its water-stable aggregate distribution, macroaggregate content (R0.25), mean weight diameter (MWD), geometric mean diameter (GMD), and the organic C and N content in soil aggregates of different particle sizes and at different depths. The effects of five different tillage modes were assessed, namely rotary tillage with straw mixed retention (RTM), conventional tillage with straw burial retention (CTB), no-tillage with straw covered retention (NTC), subsoiling with straw covered retention (STC), and no-tillage without straw retention (NT). Based on the study results, under different tillage modes, straw returning effectively enhanced the soil organic carbon (SOC) and total nitrogen (TN) reserves at the plow layer (0–30 cm), SOC increased by 17.2% to 88%, and TN increased by 8.6% to 85.9%. At the same time, the content of 0.25–2 mm aggregates increased under the straw-return treatments under different tillage patterns. The NT treatment had the lowest R0.25 and MWD and GMD values for soil aggregates at different depths, which were significantly different (p &lt; 0.05) from the other treatment modes. The correlation coefficients between SOC and soil aggregate stability indices ranged from 0.68 to 0.90, with most of them showing highly significant positive correlations (p &lt; 0.01). In conclusion, straw returning under different tillage systems has improved soil aggregate stability and promoted soil structure stability. Specifically, the STC treatment has shown more pronounced effects on soil improvement in the upper soil layer of the hilly regions in southwest China, while the RTM treatment is beneficial for improving the lower soil layer. Therefore, the comprehensive experimental results indicate that the combination of STC and RTM treatments represents the most promising mechanized tillage and straw returning practices for the hilly regions in southwest China.

Optimization and Mechanism Study of Bonding Properties of CFRP/Al7075 Single-Lap Joints by Low-Temperature Plasma Surface Treatment

This paper studied favorable low-temperature plasma (LTP) surface treatment modes for Carbon Fiber Reinforced Polymer (CFRP)/Al7075 single-lap joints using complex experimental methods and analyzed the failure modes of the joints. The surface physicochemical properties of CFRP after LTP surface treatment were characterized using scanning electron microscopy (SEM), contact angle tests, and X-ray photoelectron spectroscopy (XPS). The influence mechanism of LTP surface treatment on the bonding properties of CFRP/Al7075 single-lap Joint was studied. The results of the complex experiment and range analysis showed that the favorable LTP surface treatment parameters were a speed of 10 mm/s, a distance of 10 mm, and three repeat scans. At these parameters, the shear strength of the joints reached 30.76 MPa, a 102.8% improvement compared to the untreated group. The failure mode of the joints shifted from interface failure to substrate failure. After low-temperature plasma surface treatment with favorable parameters, the CFRP surface exhibited gully like textures, which enhanced the mechanical interlocking between the CFRP surface and the adhesive. Additionally, the surface free energy of CFRP significantly increased, reaching a maximum of 78.77 mJ/m2. XPS results demonstrated that the low-temperature plasma surface treatment led to a significant increase in the content of oxygen-containing functional groups, such as C-O, C=O, and O-C=O, on the CFRP surface.

Analyzing the effect of public private partnership mode on sewage treatment in China

The public–private partnership (PPP) mode is one of the main ways to promote environmental governance through marketization in the sewage treatment industry. This mode is crucial for environmental protection and livelihood improvement. In order to investigate the impact of PPP mode on sewage treatment, the influence of financial development and the government–business relationship on the effectiveness of sewage treatment under PPP mode, and the role of government in this context, an empirical model is established. To achieve this, data from 284 prefecture-level and above cities in China from 2009 to 2017 has been selected as research samples. The total amount of regional sewage treatment PPP projects is used as the proxy variable for participation in the PPP mode. The findings reveal that the PPP mode of sewage treatment effectively reduces the intensity and amount of sewage discharge. Moreover, the results indicate that a higher level of financial development and a more perfect financial system are associated with better sewage treatment effects under the PPP mode. Similarly, a more harmonious government–business relationship and a higher health index of this relationship correspond to improved sewage treatment effects under the PPP mode. The government should actively enhance government transparency, formulate appropriate corporate taxes and fees, clarify the responsibilities and obligations of the government and enterprises, and optimize the business environment in order to optimize the sewage treatment effect of the PPP mode.