Elution Research Articles

Greener method proposal for the determination of phenolic compounds and coumarins in aged sugarcane spirits using green bio-based solvents in HPLC-DAD-FLD system

High Performance Liquid Chromatography (HPLC) has been the most used analytical technique for analyzing phenolic compounds and coumarins in aged sugarcane spirit samples. It requires a significant amount of organic solvents, often toxic, as the mobile phase. The use of green bio-based solvents is a good alternative in the implementing more eco-friendly methods. Therefore, this work aims to propose a greener chromatographic method for the determination of phenolic compounds and coumarins in aged sugarcane spirit samples in different woods, using bio-based organic solvents (ethanol and acetic acid) in HPLC system with diode array and fluorescence detectors. Different metric tools (AGREE, ComplexMoGAPI, BAGI and Analytical Eco-scale) were used to evaluate the greenness of the analytical method. The proposed method was rigorously validated: linearity (R2 ≥ 0.9901); LOD (0.05 to 0.55 mg L-1); LOQ (0.25 to 5.00 mg L-1); precision (0.13% ≤ RSD ≤ 18.6%). The concentrations of total phenolic compounds and coumarins were up to 7.22 mg L-1. The sugarcane spirit aged in umburana presented the highest concentration of total phenolic compounds and coumarins with emphasis on trans-cinnamic acid (4.74 ± 0.01 mg L-1) and catechin (1.22 ± 0.02 mg L-1). All samples presented coumarin concentrations (<5.00 mg L-1) within the limit acceptable by legislation (10 mg L-1). The AGREE score (0.72) showed that the proposed method was greener and sustainable compared to other methods. The application of new mobile phase using green bio-based solvents proved to be advantageous from a Green Analytical Chemistry point of view.

Validated green and white RP-HPLC method for the estimation of Zolmitriptan in marketed dosage form

- To develop and validate a rapid, accurate, economical, effective and greenery RP-HPLC method for the determination of Zolmitriptan in tablet dosage form. - RP-HPLC method was developed using Luna (C18) (4.6 x 250 mm, 5 µm) column and Sodium phosphate buffer (pH 4.7): Methanol [75: 25, v/v] was used as mobile phase at a flow rate of 1.0 mL/min. The detection was carried out at 227 nm. Further, eco-friendliness, productivity and performance of the optimized analytical method were assessed by green and white tools. - The retention time of Zolmitriptan was found to be 3.25 min with acceptable chromatographic parameters. The optimized RP-HPLC method was more eco-friendly, efficient, throughput and practicable than the reported methods as confirmed by AES, AGREE, GAPI and RGB tools. Further, the proposed analytical method showed all the validation parameters within the acceptance limit of ICH Q2 R1 guidelines. The linear regression analysis indicated a good linear response in the 10 to 120 μg/mL concentration range with R2 of 0.99998. The percentage content and percentage assay of Zolmitriptan in Zomig-5mg tablet was found to be 103.36 ± 0.356 % and 97.86 ± 0.693 %. - The developed and validated method has several advantages compared to the reported HPLC methods and is useful in the systematic analysis of Zolmitriptan in its dosage form.

Development and validation of stability indicating HPLC-DAD assay of adapalene, methylparaben and propylparaben in a cosmeceutical gel matrix with blueness, greenness and whiteness assessment via relative ranking: An ab initio-sub finem juxtaposed non-traditional approaches

Adapalene (ADA) is primarily used as a cosmeceutical gel in the treatment of mild-moderate acne and is also used off-label to treat keratosis pilaris as well as other skin conditions. A stability-indicating fit-for-purpose (FFP) method has been developed for co-determination of ADA, methylparaben (MPN), and propylparaben (PPN) combined in a cosmeceutical gel dosage form. This method was based on a reversed-phase RP-HPLC separation of the cited analytes. It avoided the use of tetrahydrofuran (THF), which is commonly used by both compendial and published procedures for determination of ADA, thus improving method blueness (applicability), greenness and whiteness. The method development and validation followed non-traditional eco-friendly approaches including chemical simulations and empirical modelling. The HPLC separation was performed on an RP Zorbax Eclipse XDB-C8 analytical column [150 × 4.6 mm, 5 µm (80 Å)] with gradient elution system of HPLC grade acetonitrile and 50 mM aqueous sodium dihydrogen phosphate buffer containing 5 mM ethylenediaminetetraacetic acid (EDTA) adjusted to pH 8.0 as the mobile phase at a flow rate of 2.5 mL min−1 and column oven was set at 25 °C. EDTA played an important role for reproducibility of retention time of the three analytes especially for ADA. It controlled control deprotonation of the three acidic analytes under study and hence reproduce their ionization, hydrophobicity, and hence retention time. Quantitation was achieved with the photodiode array detection (DAD) at wavelengths of 258 nm for both MPN and PPN and 312 nm for ADA. Target Measurement Uncertainty (TMU) for the three analytes was determined via two approaches; misclassification rates approach employing 100,000 Monte Carlo simulations (MCS) and in-specification probability (ISP) to ascertain fitness-for-purpose of the proposed method. Microsoft Excel workbooks were developed for both TMU calculation approaches in addition to calculation of procedure capability index (Ppk) and sigma level for each analyte and attached in the Supplementary material. Moreover, linearity of the method underwent additional assessment using the previously mentioned TMU and procedure capability determination techniques. The robustness of the method was checked using Plackett-Burman experimental design (PBD) as an empirical modelling technique which was examined thoroughly to detect some interactions. The calibration graphs for each drug were rectilinear in the range of 0.34–7.08, 0.38–7.00 and 0.08–1.75 µg mL−1 for ADA, MPN, and PPN, respectively. The stress testing revealed photostability of the three components and variable degrees of degradation in the other conditions. The proposed HPLC-DAD method was successfully validated and applied for the determination of the investigated analytes in a gel matrix. In addition, method blueness and greenness were comparatively evaluated via very recent approaches of Blue Applicability Grade Index (BAGI), Green Solvents Selection Tool (GSST), Spider Diagram for Assessment of the Green Analytical Index (SDAGI), Analytical Method Greenness Score (AMGS), Carbon Footprint (CF), Modified Complementary Green Analytical Procedure Index (ComplexMoGAPI), and Analytical GREEnness Metric Approach (AGREE). Furthermore, the method whiteness was assessed via Red Green Blue Twelve (RGB 12) model following a relative ranking approach.

Rapid determination of nine preservatives in tobacco flavor by three phase-hollow fiber-liquid phase microextraction-high performance liquid chromatography

Tobacco flavors are extensively utilized in traditional tobacco products, electronic nicotine, heated tobacco products, and snuff. To inhibit fungal growth arising from high moisture content, preservatives such as benzoic acid (BA), sorbic acid (SA), and parabens are often incorporated into tobacco flavors. Nonetheless, consuming preservatives beyond safety thresholds may pose health risks. Therefore, analytical determination of these preservatives is crucial for both quality assurance and consumer protection. For example, BA and SA can induce adverse reactions in susceptible individuals, including asthma, urticaria, metabolic acidosis, and convulsions. Parabens, because of their endocrine activity, are classified as endocrine-disrupting chemicals. Despite extensive research, the concurrent quantification of trace-level hydrophilic (BA and SA) and hydrophobic (methylparaben, ethylparaben, isopropylparaben, propylparaben, butylparaben, isobutylparaben, and benzylparaben) preservatives in tobacco flavors remains challenging. Traditional liquid phase extraction coupled with high performance liquid chromatography (HPLC) often results in high false positive rates and inadequate sensitivity. In contrast, tandem mass spectrometry offers high sensitivity and specificity; however, its widespread application is limited by laborious sample preparation and significant operational costs. Therefore, it is crucial to establish a fast and sensitive sample pretreatment and analysis method for the nine preservatives in tobacco flavors. In this study, a method for the simultaneous determination of the nine preservatives (SA, BA and seven parabens) in tobacco flavor was established based on three phase-hollow fiber-liquid phase microextraction (3P-HF-LPME) technology combined with HPLC. To obtain the optimal pretreatment conditions, extraction solvent type, sample phase pH, acceptor phase pH, sample phase volume, extraction time, and mass fraction of sodium chloride, were examined. Additionally, the HPLC parameters, including UV detection wavelength and mobile phase composition, were refined. The optimal extraction conditions were as follows: dihexyl ether was used as extraction solvent, 15 mL sample solution (pH 4) was used as sample phase, sodium hydroxide aqueous solution (pH 12) was used as acceptor phase, and the extraction was carried out at 800 r/min for 30 min. Chromatographic separation was accomplished using an Agilent Poroshell 120 EC-C18 column (100 mm×3 mm, 2.7 μm) and a mobile phase comprising methanol, 0.02 mol/L ammonium acetate aqueous solution (containing 0.5% acetic acid), and acetonitrile for gradient elution. Under the optimized conditions, the nine target analytes showed good linear relationships in their respective linear ranges, the correlation coefficients (r) were ≥0.9967, limits of detection (LODs) and quantification (LOQs) were 0.02-0.07 mg/kg and 0.08-0.24 mg/kg, respectively. Under two spiked levels, the enrichment factors (EFs) and extraction recoveries (ERs) of the nine target analytes were 30.6-91.1 and 6.1%-18.2%, respectively. The recoveries of the nine target analytes ranged from 82.2% to 115.7% and the relative standard deviations (RSDs) (n=5) were less than 14.5% at low, medium and high levels. The developed method is straightforward, precise, sensitive, and well-suited for the rapid screening of preservatives in tobacco flavor samples.

Simultaneous determination of 10 quaternary ammonium salt bactericides in oral care products by high performance liquid chromatography-evaporative light-scattering detection

Quaternary ammonium salt bactericides are broad-spectrum bactericides often used in oral care products because of their high antibacterial efficacy, strong penetration, and low toxicity. However, the excessive use of quaternary ammonium salt bactericides may cause contact dermatitis, scalding poisoning, and even death. Existing methods to determine quaternary ammonium salt bactericides are unable to meet current requirements owing to the lack of determination components. Therefore, establishing a simple and accurate method for the simultaneous detection of more quaternary ammonium salt bactericides is necessary. In this study, a method that couples sample pretreatment with high performance liquid chromatography-evaporative light-scattering detection (HPLC-ELSD) was developed for the simultaneous determination of quaternary ammonium salt bactericides in oral care products, including dodecyltrimethylammonium chloride, dodecyldimethylbenzylammonium chloride, benzethonium chloride, tetradecyl trimethyl ammonium chloride, tetradecyldimethylbenzylammonium chloride, N-hexadecyltrimethylammonium chloride, benzyldimethylhexadecylammonium chloride, trimethylstearylammonium chloride, stearyldimethylbenzylammonium chloride, and docosyltrimethylammonium chloride. Some of these bactericides do not absorb ultraviolet light, so a universal evaporative light-scattering detector was used owing to testing cost and stability concerns. The paste samples contained thickening agents, which are highly soluble in water but insoluble in organic solvents; these agents can seriously affect the results of sample pretreatment and damage the chromatographic column. Hence, sample dehydration was necessary. In this study, four dehydration methods were compared. Anhydrous sodium sulfate (Na2SO4) was selected, and the amount of Na2SO4 was optimized. Based on the solubility of the 10 target compounds and extraction efficiency, three extraction solvents were compared, and ethanol was selected. Ultrasonic extraction was the primary extraction process used in this study. The effects of different ultrasonication times, temperatures, and powers on the extraction recoveries were also investigated. Ultimately, the optimized conditions were as follows: extraction of the dehydrated paste and powder samples using ethanol at room temperature (25 ℃) for 20 min under 100 W ultrasound power, and dilution of the liquid sample with ethanol. After extraction, the samples were separated on an Acclaim Surfactant column (150 mm×4.6 mm, 5 μm) with 50 mmol/L ammonium acetate aqueous solution (pH=5.5) (A) and acetonitrile (B) as mobile phases. The gradient elution program were as follows: 0-5.0 min, 75%A-35%A, 5.0-15.0 min, 35%A-20%A, 15.0-20.0 min, 20%A, 20.0-21.0 min, 20%A-75%A, 21.0-25.0 min, 75%A. An external standard method was used for quantitative determination. The 10 compounds were analyzed within 25 min. Linear equations, correlation coefficients, and linear ranges were obtained by analyzing a series of mixed standard working solutions. The limits of detection (LODs, S/N=3) and quantification (LOQs, S/N=10) of the 10 components were determined. Stearyldimethylbenzylammonium chloride and docosyltrimethylammonium chloride showed good linear relationships in the range of 10-200 mg/L, while the other compounds demonstrated good linear relationships in the range of 5-100 mg/L. In all cases, correlation coefficients (R2) of no less than 0.9992 were obtained. The LODs and LOQs were in the range of 1.42-3.31 mg/L and 4.25-9.94 mg/L, respectively. Ten analytes were spiked in blank matrices, such as toothpaste (paste), mouthwash (liquid), and dentifrice powder (powder) at three levels, and the recoveries and precisions were calculated. The average recoveries were 87.9%-103.1%, and the corresponding relative standard deviations (RSDs) did not exceed 5.5% (n=6). The developed method was used to detect 109 oral care products. Benzyldimethylhexadecylammonium chloride and stearyldimethylbenzylammonium chloride revealed high detection rates. Moreover, the amount of stearyldimethylbenzylammonium chloride in one toothpaste sample exceeded regulatory requirements. Given its advantages of good precision and accuracy, the developed method is suitable for the quantitative analysis of the 10 aforementioned compounds in typical oral care products. The study findings can serve as a reference for the quality and safety monitoring of oral care products.

Harnessing an elastic flow instability to improve the kinetic performance of chromatographic columns

Despite decades of research and development, the optimal efficiency of slurry-packed HPLC columns is still hindered by inherent long-range flow heterogeneity from the wall to the central bulk region of these columns. Here, we show an example of how this issue can be addressed through the straightforward addition of a semidilute amount (500 ppm) of a large, flexible, synthetic polymer (18 MDa partially hydrolyzed polyacrylamide, HPAM) to the mobile phase (1% NaCl aqueous solution, hereafter referred to as “brine”) during operation of a 4.6 mm × 300 mm column packed with 10μm BEHTM 125 Å particles. Addition of the polymer imparts elasticity to the mobile phase, causing the flow in the interparticle pore space to become unstable above a threshold flow rate. We verify the development of this elastic flow instability using pressure drop measurements of the friction factor versus Reynolds number. In prior work, we showed that this flow instability is characterized by large spatiotemporal fluctuations in the pore-scale flow velocities that may promote analyte dispersion across the column. Axial dispersion measurements of the quasi non-retained tracer thiourea confirm this possibility: they reveal that operating above the onset of the instability improves column efficiency by greater than 100%. These experiments thereby suggest that elastic flow instabilities can be harnessed to mitigate the negative impact of trans-column flow heterogeneities on the efficiency of slurry-packed HPLC columns. While this approach has its own inherent limitations and constraints, our results lay the groundwork for future targeted development of polymers that can impart elasticity when dissolved in commonly used liquid chromatography mobile phases, and can thereby generate elastic flow instabilities to help improve the resolution of HPLC columns.

Selective Segregation of Thermo-Responsive Microgels via Microfluidic Technology.

Separation of equally sized particles distinguished solely by material properties remains still a very challenging task. Here a simple separation of differently charged, thermo-responsive polymeric particles (for example microgels) but equal in size, via the combination of pressure-driven microfluidic flow and precise temperature control is proposed. The separation principle relies on forcing thermo-responsive microgels to undergo the volume phase transition during heating and therefore changing its size and correspondingly the change in drift along a pressure driven shear flow. Different thermo-responsive particle types such as different grades of ionizable groups inside the polymer matrix have different temperature regions of volume phase transition temperature (VPTT). This enables selective control of collapsed versus swollen microgels, and accordingly, this physical principle provides a simple method for fractioning a binary mixture with at least one thermo-responsive particle, which is achieved by elution times in the sense of particle chromatography. The concepts are visualized in experimental studies, with an intend to improve the purification strategy of the broad distribution of charged microgels into fractioning to more narrow distribution microgels distinguished solely by slight differences in net charge.

Green analytical chemistry and quality by design: A combined approach towards simultaneous determination of Letrozole with its co-administered Zoledronic Acid for cancer patients

Nowadays, breast cancer is the most affecting and globally diagnosed malignancy among women, yet Letrozole (LTZ) was considered the first-line treatment as hormonal anticancer drug. Unfortunately, LTZ develops osteoporosis as a main side effect which was overcome by using the co-administered; Zoledronic Acid (ZDA). Thus, there was a crucial need for this simultaneous quantification innovation, especially there were no any previously reported methods regarding both drugs together. In this study, an integrated framework was conducted between the experimental analytical quality-by-design (AQbD) approach and green analytical chemistry (GAC), emerging sensitive and robust RP-HPLC method. Box-Behnken Design was the developed model for optimizing an isocratic chromatographic separation on C18 Equisil® ODS (4.6×250mm, 5.0 μm) column at ambient temperature, using the mobile phase of 0.1% aqueous trifluroacetic acid (pH 2.8): acetonitrile (54.5:45.5, v/v), at 1.0mL/min flow rate with PDA detection at 254.0nm and 210.0nm for LTZ and ZDA, respectively. Model statistical and residual plots analysis was significant and normally distributed. Method was fully validated as per ICH guidelines, where good linearity was 0.20-10.00µg/mL for both drugs in presence of Tadalafil (TDF) as an internal standard, obtaining adequate correlation coefficients (r) values. Calculated LOD results were 0.058 and 0.040µg/mL while calculated LOQ results were 0.175 and 0.122µg/mL for LTZ and ZDA, respectively. The proposed method was effectively applied on bulk, pharmaceutical dosage forms, and spiked human plasma. Statistical comparison of the anticipated results with the reported ones was performed. Greenness assessment was evaluated using Green Analytical Procedure Index (GAPI) and Analytical Greenness (AGREE) tools; where superiority results were achieved relative to other reported methods. Finally, an EVG method evaluation tool was assessed, and the attained results were represented through its radar chart.

Targeted screening and profiling of massive components of colistimethate sodium by two-dimensional-liquid chromatography-mass spectrometry based on self-constructed compound database

In-depth study of the components of polymyxins is the key to controlling the quality of this class of antibiotics. Similarities and variations of components present significant analytical challenges. A two-dimensional (2D) liquid chromatography-mass spectrometric (LC-MS) method was established for screening and comprehensive profiling of compositions of the antibiotic colistimethate sodium (CMS). A high concentration of phosphate buffer mobile phase was used in the first-dimensional LC system to get the components well separated. For efficient and high-accuracy screening of CMS, a targeted method based on a self-constructed high resolution mass spectrum database of CMS components was established. The database was built based on the commercial MassHunter Personal Compound Database and Library (PCDL) software and its accuracy of the compound matching result was verified with 6 known components before being applied to genuine sample screening. On this basis, the unknown peaks in the CMS chromatograms were deduced and assigned. The molecular formula, group composition and origins of a total of 99 compounds, of which the combined area percentage accounted for more than 95% of CMS components, were deduced by this 2D-LC-MS method combined with the MassHunter PCDL. This profiling method was highly efficient and could distinguish hundreds of components within 3 h, providing reliable results for quality control of this kind of complex drugs.

Development of Uv-visible and Hplc Analytical Methods for Quantitative Analysis of Antiulcer Drugs in Dosage Forms

Precise measurement of active pharmaceutical ingredients (APIs) in dosage forms is crucial in the pharmaceutical business to guarantee the quality, effectiveness, and safety of the product. This research is focused on creating and confirming analytical techniques for accurately measuring the amount of antiulcer medicines in different types of medication. The measurement of antiulcer medicines in their respective formulations was carried out using two analytical techniques: UV-Visible spectroscopy and High-Performance Liquid Chromatography (HPLC). UV-Visible spectroscopy is a straightforward and cost-effective method that allows for quick examination. It is particularly useful for regular quality control applications. HPLC, in contrast, offers exceptional sensitivity, specificity, and precision, facilitating the isolation and measurement of many constituents in complex matrices. The technique development procedure included optimizing experimental parameters, including solvent systems, detection wavelengths, column types, mobile phase composition, and flow rates. The reliability and robustness of the suggested procedures were ensured by validation studies done in accordance with ICH recommendations. The adequacy of the procedures for their intended purpose was assessed by evaluating parameters such as linearity, precision, accuracy, specificity, and robustness. The UV-Visible and HPLC techniques that were developed showed exceptional linearity over the examined concentration range, with correlation values (R²) above 0.99. The precision experiments showed low relative standard deviations (RSDs), suggesting excellent repeatability and moderate accuracy. The accuracy checks demonstrated that the recovery values were within acceptable ranges, therefore verifying the dependability of the methodologies used for quantitative analysis.

Determination of sodium cyclamate in Baijiu by pre-column derivatization-high performance liquid chromatography with fluorometric detection

Sodium cyclamate in Baijiu is a key item in the China National Food Safety Supervision and Inspection Plan. A simple, economical, sensitive, and reliable method is urgently needed for routine analysis and internal quality control. A method based on high performance liquid chromatography with fluorescence detection (HPLC-FLD) was developed for the determination of sodium cyclamate in Baijiu by o-phthalaldehyde derivatization. First, the sodium cyclamate in the sample solution was converted into amino compounds using the desulfurization reaction under acidic conditions. Next, 400 g/L sodium hydroxide solution was added to the sample solution for neutralization. The amino compounds in the sample solution were then derivatized with o-phthalaldehyde to produce indole-substituted derivatives that are capable of producing fluorescence signals. Separation was carried out on a C18 column (250 mm×4.6 mm, 5 μm) in isocratic elution mode using a mobile phase consisting of acetonitrile and phosphate buffer. Finally, the eluate was monitored using a fluorescence detector, and an external standard method was used for quantification. A good linear relationship was obtained in the range of 0.1-2.0 mg/L, with correlation coefficients greater than 0.999. The average recoveries of sodium cyclamate spiked at levels of 0.1-1.0 mg/kg in Baijiu samples ranged from 90.7% to 100.9%, with relative standard deviations (RSDs) of 3.5%-5.6% (n=6). The limits of detection and quantification were 0.03 and 0.10 mg/kg, respectively. Nine Baijiu samples collected from the market were tested, and the results demonstrated that the contents of sodium cyclamate detected by the developed method were consistent with those obtained using the liquid chromatography-tandem mass spectrometry (LC-MS/MS) method described in GB 5009.97-2016 (the third method). The proposed method is economical, sensitive, specific, and accurate; thus, it provides a basic approach for the determination of sodium cyclamate in Baijiu samples and has great potential for routine analysis in foodstuffs.

A new RP-HPLC method for the simultaneous detection and quantification of minocycline and ascorbic acid in pure forms and combined pharmaceutical dosage forms

We report the first reverse-phase, high performance liquid chromatography (RP-HPLC) method for the rapid and simple simultaneous detection and quantification of minocycline and ascorbic acid in raw and pharmaceutical dosage forms. Detection was performed on a Sunniest C-18 column (5 μm particle size, 150 mm × 4.6 m mi.d(, at UV wavelength of 255 nm. The mobile phase consisted of potassium dihydrogen phosphate pH 2.8: Acetonitrile: Methanol (85:10:5), with 0.6 v/v% TEA and adjusted with orthophosphoric acid to a pH of 2.8 in an isocratic elution mode, with a flow rate of 0.8 mL/min. Performed analysis on the method proved that the newly developed method was sensitive, selective, accurate, precise, and robust. The method demonstrated good linearity with r2 = 0.9999 (n = 7) for both drugs and was validated in the sample concentration ranges of 1–100 and 5–500 µg mL−1 for minocycline and ascorbic acid, respectively. Both intra- and inter-day precisions were less than 2 % for both drugs, with limits of detection of 1.59 and 7.89 µg/mL and limits of quantification of 4.83 and 23.89 µg/mL, for minocycline and ascorbic acid, respectively. The applicability of the method was demonstrated by accurately determining the drug content of two commercial pharmaceutical formulations.

An ultra-fast green ultra-high-performance liquid chromatography-tandem mass spectrometry method for estimating the in vitro metabolic stability of zotizalkib in human liver microsomes.

Zotizalkib (ZTK, TPX-0131) is a fourth-generation highly effective inhibitor of wild-type anaplastic lymphoma kinase (ALK) and ALK-resistant mutations that can penetrate the central nervous system. It exhibited greater potency compared to all five officially approved ALK inhibitors. The aim of this study was to develop a rapid, accurate, eco-friendly, and highly sensitive ultra-high-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) method for measuring the concentration of ZTK in human liver microsomes (HLMs). The validation aspects of the current UHPLC-MS/MS methodology in the HLMs were conducted in accordance with the bioanalytical method validation standards specified by the US Food and Drug Administration. ZTK and encorafenib were separated using an Agilent C8 column (Eclipse Plus) and an isocratic mobile phase. The calibration curve for the developed ZTK exhibited a linear relationship within the concentration range of 1-3000ng/mL. The results from the Analytical Green-ness Metric Approach program (0.76) suggested that the created method demonstrated a significant degree of environmental sustainability. The in vitro half-life (t1/2) and intrinsic clearance (Clint) of ZTK were determined to be 15.79min and 51.35mL/min/kg, respectively that suggests the ZTK exhibits characteristics similar to those of a medication with a high extraction ratio. These approaches are crucial for the progress of novel pharmaceutical development, especially in improving metabolic stability.

High-temperature liquid chromatography-isotope ratio mass spectrometry methodology for carbon isotope ratio determination of anabolic steroids in urine

BackgroundGas Chromatography Isotope Ratio Mass Spectrometry (GC-C-IRMS) has long been used in routine laboratories to determine the δ13C values of anabolic steroids in urine, differentiating between, e.g., endogenous and synthetic testosterone (T) in sports doping control. Until now, liquid chromatography (LC-IRMS) has not been used. The LC-IRMS setup doesn't allow organic solvents or modifiers in the mobile phase for δ13C determinations. Mid-to non-polar analytes such as steroids can be analysed in water heated to High Temperatures (HT, up to 200 °C) because at 200 °C has a similar polarity as 80/20 methanol/water at ambient temperature. In this work, we developed a method for steroids in urine, extending the application of the LC-IRMS to non-polar analytes in complex matrices. ResultAn HT-LC-IRMS method capable of determining the δ13C values of four steroids (i.e., testosterone (T), 5α-androstane-3α,17β-diol (ααβ), 5β-androstane-3α,17β-diol (βαβ) and pregnanetriol (PT)) in urine was developed and validated. Accuracy ranged from 0.23 ‰ (ααβ and βαβ) to 0.49 ‰ (T), and the detection limit was set at 10 ng mL−1 (T, ααβ+βαβ). The validation data and a comparison of authentic urine samples analysed with HT-LC-IRMS and GC-C-IRMS indicated a comparable performance between HT-LC-IRMS and GC-C-IRMS. SignificanceHT-LC-IRMS can be used to determine δ13C values of anabolic steroids, extending the applicability of both HT-LC and LC-IRMS to non-polar substances determined in a complex matrix in routine laboratory practice.

Development and Validation of HPLC-UV Method for the Determination of Levothyroxine in Orodispersible Minitablets for Pediatric Application

Background: Thyroid hormones play an important role in cognition and brain development. The determination of the content of levothyroxine, as well as related substances and dissolution test analysis, should be carried out by methods that are selective and highly sensitive due to the low concentration used in low dose orodispersible minitablets Objectives: This study aims to develop and validate an analytical method by HPLC-UV for the quantification of levothyroxine and its related substances in pharmaceutical formulations; looking forward to being this method suitable for a future dissolution test analysis using tandem mass spectrometry detector. Methods: A Hypersil GOLD C18 (100 x 2.1 mm, 3 μm) column was used with 25°C column temperature, 5 μL injection volume, 0.3 mL/min flow rate and detection at 225 nm. The mobile phase consisted of methanol: 0.05% formic acid (55:45). The developed method was validated for specificity, linearity, precision, accuracy and robustness. Results: The method is linear within the range of 2-20 μg mL-1 (R2=0.9982), which makes the method suitable for the evaluation of levothyroxine in pharmaceuticals formulations. LOQ was 0.17 μg/mL (0.85 ng on column) and LOD 0.05 μg/mL (0.25 ng on column) of LT4. Therefore, in terms of efficiency (1671), retention factor, k (6.79), Tailing factor, T (1.09) and resolution, Rs (5.11) the chromatographic method was found to be suitable according to USP 43. Conclusion: The HPLC UV method was found to be linear, specific, precise, accurate and robust, therefore it is suitable for the quality control of levothyroxine in pharmaceutical ODMTs..

Nanofiltration membranes in asymmetric flow field-flow fractionation for improved organic matter size fractionation

Size fractionation of organic matter (OM) by asymmetric flow field-flow fractionation (FFFF) with ultrafiltration (UF) is limited by solute loss and peak resolution, particularly for low molecular weight fractions (< 10 kDa). Nanofiltration (NF) with a molecular weight cut-off (MWCO) of ≤ 1 kDa can achieve significant OM retention and may improve OM fractionation. NF membranes with MWCOs ranging from 0.3 to 3 kDa were used to evaluate the retention and fractionation of nine OMs in the humic, polyphenol, biopolymer, and low molecular weight organic classes in stirred cell NF and FFFF. Membranes with an MWCO of 0.2–0.3 kDa (with a pure water permeability of 5–16 L.m-2.h-1.bar-1) with low OM interaction exhibited high peak recovery and resolution and hence improved OM fractionation. Loose NF (MWCO 3 kDa) exhibited a poor peak recovery because of a high OM loss due to both adhesion and permeation, particularly at high ionic strengths (> 10 mM). A mixture of nine types of OM and natural organic matter samples from rivers, swamps and lakes achieved good fractionation with a 0.3 kDa (NF270) membrane at low ionic strength. The performance of NF for the analysis of OM and colloids in the smallest size range (≤ 1 kDa MW) could be further improved by optimizing the salt composition of the mobile phase and by overcoming the pressure limitations of FFFF channels.

Determination of five veterinary drug residues in milk by ultra-high performance liquid chromatography-quadrupole/electrostatic field orbitrap mass spectrometry based on modified chitosan membrane purification

Milk is an important consumer product with high nutritional value. The presence of veterinary drug residues in milk owing to the indiscriminate use of veterinary drugs may affect consumer health. In the mass spectrometric analysis of trace compounds, chromatographic co-eluting components easily interfere with the mass spectral signals obtained, affecting the accuracy of qualitative and quantitative analyses. Matrix purification is a promising method to reduce the matrix effect. Chitosan is a natural biopolymer with numerous active functional groups such as amino, acetyl, and hydroxyl groups; these groups can adsorb lipids through hydrophobic and electrostatic interactions. Chitosan also has the advantages of low production cost, stable chemical properties, and convenient modification. Novel chitosan-based materials are promising candidates for lipid purification. In this study, a chitosan membrane was modified with trimethoxyoctadecylsilane (C18-CSM). C18-CSM was prepared through one-step hydrolysis and used as a dispersive solid phase extraction (DSPE) adsorbent to purify the matrix during milk pretreatment. We combined C18-CSM with ultra-high performance liquid chromatography-quadrupole/electrostatic field orbitrap mass spectrometry (UHPLC-Q/Exactive Orbitrap MS) to develop an effective method for the extraction and determination of ofloxacin, enrofloxacin, ciprofloxacin, diazepam, and metronidazole in milk. C18-CSM was characterized using scanning electron microscopy, Fourier transform infrared spectroscopy, and water contact angle testing. The results indicated that the material has a rough surface and uniformly dense cross-section. The water contact angle of C18-CSM was 104°, indicating its good hydrophobicity. The pretreatment conditions (extraction solvent, dosage of NaCl, extraction frequency, and dosage of C18-CSM) that influenced the recoveries of the five veterinary drugs were investigated in detail. The optimal conditions were established as follows: 5% formic acid in acetonitrile, 1 g NaCl, extraction 1 time, 20 mg C18-CSM. Separation was performed on a Hypersil GOLD VANQUISH column (100 mm×2.1 mm, 1.9 μm). The mobile phase consisted of 0.1% formic acid aqueous solution and 0.1% formic acid in acetonitrile, and was flowed at a rate of 0.3 mL/min. The sample injection volume was 1 μL, and the column temperature was maintained at 25 ℃. Mass spectrometric analysis was performed in positive electrospray ionization mode. To verify the necessity of the purification material, the matrix effect was investigated using the matrix-matched standard curve method. The use of C18-CSM reduced the matrix effects of the five necessity drugs from the range of -22%-8.8% to the range of -13%-3.6%, indicating that C18-CSM is a highly efficient DSPE material. Under optimal conditions, the developed method showed good linearities within the range of 0.5-100 μg/L, with correlation coefficients (r2)≥0.9970. The limits of detection(LODs) and quantification (LOQs) were 0.2 μg/L and 0.5 μg/L, respectively. To assess the accuracy and precision of the method, we prepared milk samples with three spiked levels (low, medium, and high). The recoveries of the five veterinary drugs were ranged from 79.5% to 115%, and the intra-day and inter-day relative standard deviations were 7.0%-13% (n=6) and 1.3%-11% (n=3), respectively. This study provides a simple, accurate, and reliable method for the rapid and simultaneous determination of the five veterinary drug residues in milk.

An ultra-fast ultra-high-performance liquid chromatography-tandem mass spectrometry method for estimating the in vitro metabolic stability of palbociclib in human liver microsomes: In silico study for metabolic lability, absorption, distribution, metabolism, and excretion features, and DEREK alerts screening.

Palbociclib (Ibrance; Pfizer) was approved for the management of metastatic breast cancer characterized by hormone receptor-positive/human epidermal growth factor receptor 2 negative status. The objective of this study was to create a fast, precise, environmentally friendly, and highly sensitive ultra-high-performance liquid chromatography-tandem mass spectrometry approach for quantifying palbociclib (PAB) in human liver microsomes with the application for assessing metabolic stability. The validation features were performed in agreement with the bioanalytical method validation standards outlined by the US Food and Drug Administration. The StarDrop software (WhichP450 and DEREK modules) was used in screening the metabolic lability and structural alerts of PAB. The separation of PAB and encorafenib (as an internal standard) was achieved on a C8 column, employing an isocratic mobile phase. The inter-day and intra-day accuracy and precision ranged from -6.00% to 4.64% and from -2.33% to 3.13%, respectively. The constructed calibration curve displayed a linearity in the range of 1-3000ng/mL. The sensitivity of the established approach was proven by the lower limit of quantification of 0.73ng/mL. The Analytical GREEness calculator results revealed the high level of greenness of the developed method. The PAB's metabolic stability (t1/2 of 18.5 min and a moderate clearance (Clint) of 44.8mL/min/kg) suggests a high extraction ratio medication that matched the WhichP450 software results.

An ultrasound assisted dispersive micro solid-phase extraction and a composite ionic liquid-metal organic framework for sixteen polycyclic aromatic hydrocarbons analysis in fruit juice and environmental water samples

Aluminum-based metal organic framework composite containing ionic liquid was prepared and used as sorbent for extraction of sixteen polycyclic aromatic hydrocarbons in list of priority pollutants of United States Environmental Protection Agency before their analysis by gas chromatography/mass spectrometry. The dispersive micro solid-phase extraction method, known as a simple and fast method, was preferred as the extraction method. The optimized parameter conditions were 5 mL of sample solution, 10 min sonication by ultrasonic bath, 30 mg of sorbent, 30 °C extraction temperature, 0.1 mL of hexane as elution solvent with 5 min elution time. The suggested method presented that limit of detection and limit of quantification were in the range of 0.01–0.10 μg l-1, and 0.04–0.33 μg L-1, respectively. The intra-day and inter-day repeatability were within the ranges of 1.18–4.88 % and 1.02–5.06 %, respectively. The recoveries for polycyclic aromatic hydrocarbons in peach juice, cherry juice, tap water and rain water samples were obtained in the range of 84.9–99.9 % for spiked 5, 50 and 100 μg l-1 standard polycyclic aromatic hydrocarbons solution.

High-throughput liquid chromatography-vacuum differential mobility spectrometry-mass spectrometry for the analysis of isomeric drugs of abuse in human urine.

The use of differential mobility spectrometry at low pressure coupled to liquid chromatography-mass spectrometry (LC-vDMS-MS) was investigated for the analysis of 13 drugs of abuse (DoA) including the following: cocaine, ecgonine methyl ester, cocaethylene, benzoylecgonine, norcocaine, tramadol, isomeric pairs of metabolites; O-desmethyl-cis-tramadol and N-desmethyl-cis-tramadol, and cannabinoids: Δ9-tetrahydrocannabinol, Δ9-tetrahydrocannabidiol, 11-hydroxy-Δ9-tetrahydrocannabinol, 11-nor-9carboxy-Δ9-tetrahydrocannabinol, and 11-nor-9carboxy-Δ9-tetrahydrocannabinol glucuronide. Different parameters were optimized for isomeric separation, such as LC mobile phase composition (20%-100% methanol acetonitrile and isopropanol, flow rate: 8-100 μL/min) and DMS separation voltage. Methanol and acetonitrile significantly affected the compensation voltage of the analytes and improved DMS separation. A short trap/elute LC-vDMS-SIM/MS screening method of 1min was developed to quantify 11 drugs of abuse (except THC/CBD), in addition to a 4-min LC-vDMS-SIM/MS method to identify and quantify five cannabinoids including the isomers THC/CBD and three THC metabolites. THC is the principal psychoactive constituent of cannabis and is a controlled substance in comparison to its isomeric counterpart CBD; this highlights the importance and challenges to resolve these isomeric pairs by analytical techniques. The signal responses were linear over a concentration range of 0.005-10μg/mL for the DoA and 1-1000 ng/mL for cannabinoids. The intraday and interday precision were better than 12.2% and accuracy better than 115%. Urine samples from subjects who tested positive for THC and/or cocaine during roadside drug testing were evaluated to assess the performance of the methods LC-vDMS-SIM/MS and LC-MRM/MS. Results show that the developed LC-vDMS-SIM/MS method presents similar performance to LC-MRM/MS with improved sample throughput.