Mm In Size Research Articles

Seasonal variations in microplastics in a coastal wetland in southwest India as well as their risks to Sillago sihama and Gerres filamentosus.

Microplastics are minute plastic particles ranging from 1µm to 5mm in size. Mangroves are crucial ecosystems with roles in carbon sequestration, shoreline protection, and habitat for diverse species. Despite their significance, the extent of microplastic pollution in mangroves, especially in India, remains inadequately understood. To address this gap, we conducted a seasonal sampling in the Kota mangrove ecosystem at different water column depths. Our analysis revealed average microplastic abundances of 0.93 (monsoon), 3.71 (post-monsoon), and 2.92 MPs/L (pre-monsoon). The average microplastic abundances were 19.88 and 15.86 microplastics/individual for Gerres filamentosus and Sillago sihama, respectively. Fibrous microplastics smaller than 1mm were dominant. Transparent microplastics dominated the water column (28.57% in monsoon, 77.45% in post-monsoon, and 49.24% in pre-monsoon), and they were also prevalent in S. sihama (49.55%) and G. filamentosus (41.51%). This points towards greater bioavailability and suggests that transparent microplastics are often mistaken for prey. Anthropogenic influence is a major factor that governs microplastic distribution than season in Kota mangroves. Fourier transform infrared spectroscopy revealed that polypropylene was the dominant polymer in both water column as well as in S. sihama and G. filamentosus. We identified aquaculture, tourism, and local activities as probable sources of microplastic pollution. The monitoring data is crucial as it provides insights into microplastics pollution in two economically important fish species that are largely consumed by the local population. Exposure to microplastics from the consumption of these fish may cause serious health issues for human beings.

Metallurgical Waste for Sustainable Agriculture: Converter Slag and Blast-Furnace Sludge Increase Oat Yield in Acidic Soils

The study is the first to examine the combined use of blast-furnace sludge as a source of microelements and converter slag as a soil-deoxidizing agent in oat (Avena sativa L.) cultivation in sod-podzolic soils. It has been established that blast-furnace sludge is a highly dispersed waste, which contains about 50% iron, 7% zinc, and a small amount of calcium, silicon, magnesium, aluminum, and sulfur. Hazardous components such as lead, arsenic, etc., are not detected. Converter slag comprises porous granules up to 3 mm in size, consisting mainly of calcium compounds (CaO, Ca(CO)3, CaSiO3, CaFe2O4) and a small amount of Mn, Al, and Mg trace elements. In a laboratory experiment, blast-furnace sludge increased the germination of oats by 5–10%, regardless of the addition of a deoxidizer (slag), but at the same time suppressed the growth of stem length by a maximum of 18% at 1 g∙kg−1. The addition of slag raised substrate pH and increased the index by 8% at a sludge concentration of 0.1 g∙kg−1. Root length in deoxidizer-free variants increased by 50–60% and with the addition of slag by 27–47%. Root dry mass also increased under the addition of sludge by 85–98%; however, the addition of slag reduced the indicator to the control level. In a field experiment with the combined application of waste, an increase in yield by more than 30% was shown. When soil was treated with slag and sludge, the height of plants increased by an average of 18%. It should be noted that the introduction of waste did not affect the quality of the grain. The use of slag increased the lead content in the soil, which is probably due to the sorption properties of calcium compounds in the slag, since lead was not found in the analyzed waste. Presumably, lead is sorbed by slag from the lower soil horizons, concentrating and immobilizing it in the upper layer. This version is supported by the absence of lead accumulation in straw and oat grain. The zinc-containing sludge increased the content of this element by 33% in the soil, as well as by 6% in straw and by 14% in grain. Thus, we found that the studied metallurgical wastes can be used as nutrients for agriculture, both individually and jointly. Overall, the proposed approach will contribute both to reducing the amount of accumulated waste and to improving the efficiency and sustainability of agricultural production and CO2 sequestration. However, the features of the accumulation of heavy metals in soil and plants under the influence of the analyzed types of waste require more in-depth study, including within the framework of long-term field experiments.

Utility of near-infrared fluorescent clip for the robot-assisted gastrectomy: Report of 2 cases (case series)

Introduction and importanceThe importance of preoperative tumor site marking has increased over the years, as the method of intraoperative primary lesion identification and determination of resection margins is one factor determining whether oncological safety and function-preserving gastrectomy are possible during surgery. We hypothesize that preoperative placement of the near-infrared fluorescent (NIRF) clip, ZEOCLIP FS, near the oral incision line of the gastric tumor will allow for Firefly recognition of the NIRF clip on da Vinci during surgery and easy determination of the tumor location and incision line. Hence, we report on two cases in which the procedure was performed. Case presentationCase 1: A 62-year-old woman was diagnosed with early gastric cancer of 35 mm in size located in the greater curvature of the gastric angle and underwent robot-assisted distal gastrectomy. NIRF clips were placed around the negative biopsy-confirmed area on the tumor's oral side by endoscopy on the day before surgery. The clips were identified intraoperatively in Firefly mode, and we performed gastrectomy without using an intraoperative endoscope. Case 2: A 60-year-old man was diagnosed with early gastric cancer 40 mm in size on the anterior wall of the gastric angle and underwent robot-assisted distal gastrectomy. Similarly, NIRF clips were placed around the site of negative biopsy confirmation the day before surgery. NIRF clips were identified, and we performed gastrectomy. Clinical discussionThe time taken to mark the gastric resection line after activating the Firefly imaging system was 120 and 154 s, respectively, and intraoperative endoscopy was not required. The advantage of our two-step method is that a surgeon can mark the clips the day before the surgery, even if they are not endoscopists. Increasing the recognition rate of fluorescent clips and preventing their remains are future issues. ConclusionBased on the results of the above two cases, ZEOCLIP FS is influential in determining the tumor's location and the resection line.

Microplastics and their interaction with microorganisms in Bosten Lake water

Microplastic pollution in inland freshwater lakes, formed from melting ice, atmospheric precipitation, and groundwater, remains under-researched. This study examines microplastic (MPS) presence and distribution in Bosten Lake and their interaction with microorganisms. We employed a Confocal Raman spectrometer to identify MPS types and 16S rRNA high-throughput sequencing to analyze microbial diversity and composition. In May, the lake's average microplastic concentration was 108.20 particles per liter (PCS/L), decreasing to 21.67 PCS/L by October. Transparent and yellow fibrous microplastics, predominantly 0.2–0.5 mm in size, were most common. Key microplastics in May included PEEK (27%), PMMA (25%), and PET (9%), while October saw a prevalence of PET (35%), PS (13%), and PA (9%). Higher microplastic concentrations correlated with reduced microbial diversity. In May, the high microplastic concentration group (MH) showed increased Planctomycetota, while in October, Patescibacteria and Bacteroidota rose significantly in the high plastic group (OH), known for microplastic degradation. MH also had a higher abundance of Cryptomycota compared to OH. Functional analysis indicated that MH had more genes related to bisphenol, benzene, and chlorine compounds, whereas OH had genes linked to methane, nitrogen, and organic matter degradation. Microplastic concentrations peaked near the lake inlet and tourist areas, affecting microbial quantity, diversity, structure, and function. This research enhances our understanding of MPS distribution and environmental microbial shifts in similar settings, providing essential data for environmental management strategies at Bosten Lake.

Fish guts possess higher priority in assessing ecological risk of microplastics in both fish bodies and aquatic environments

Microplastics (MPs, ＜5mm in size) have rapidly spread across aquatic ecosystems, which urgently needs systematic assessment for their ecological risk. Fish species have frequently been selected as indicator organisms in evaluating MPs contaminants. However, it has been questioned that which organs of fishes should be examined due to tissue-specific results. In this study, we investigated the accumulation and depuration process of MPs in the main organs of zebrafish under different MPs concentrations as well as the presence and absence of food resources. Our results recorded consistently higher MPs accumulation in fish guts among different MPs concentrations, implying fish guts as stable organs representing organisms’ MPs contaminants. Meanwhile, MPs accumulated in fish guts increased significantly with increasing exposure concentrations, highlighting fish guts as sensitive organs in reflecting MPs contamination in aquatic environments. In addition, MPs accumulated in fish guts under non-feeding conditions followed a logistic “S” curve while fluctuated under feeding conditions, suggesting increased ecological MPs risk with the absence of food resources. The depuration rate in fish guts was significantly higher in the feeding group than in the non-feeding group, implying better expelling ability of MPs with the presence of food resources. Our study proposes fish guts as the optimal indicator organs in assessing the ecological risk of MPs contaminants in both fish bodies and aquatic environments, and highlights the importance of sustaining sufficient food resources in aquatic environments to reduce the MPs triggered adverse effects on fish species.

The Value of Second-look Ultrasound and Mammography for Assessment and Biopsy of MRI-detected Breast Lesions

Rationale and ObjectivesSuspicious lesions detected in multiparametric breast MRI can be further analyzed with second-look ultrasound (SLUS) and/or mammography. This study aims to assess the value of second-look imaging in selecting the appropriate biopsy method for different lesion characteristics. Materials and MethodsBetween January 2021 and December 2023, 212 women underwent contrast-enhanced multiparametric breast MRI at 3.0 Tesla. A total of 241 suspicious lesions (108 malignancies, 44.8%) were further assessed with SLUS and second-look mammography. Subsequent image-guided biopsy of each lesion was performed using the most suitable modality. Size-dependent lesion detection rates in SLUS and mammography were compared by means of the McNemar test. ResultsLesions referred to MRI-guided biopsy were predominantly ≤ 10 mm in size (52.8%). SLUS displayed higher detection rates than mammography for mass lesions (55.6% [95% confidence interval 46.4–64.4%] versus 16.7% [10.6–24.3%]; p<0.001) with a particularly high sensitivity for malignant mass lesions > 10 mm (88.5 % [69.9–97.6%]). In contrast, the detection rate for malignant non-mass lesions was lower in SLUS than in second-look mammography (22.0% [11.5–36.0%] versus 38.0% [24.7–52.8%]; p<0.001). The malignancy rates in ultrasound-, mammography-, and MRI-guided biopsies were 53.7%, 55.2%, and 35.0%, respectively. ConclusionSLUS is an excellent tool for further assessment and biopsy of suspicious mass lesions > 10 mm without associated calcifications. In contrast, supplemental ultrasound is of limited value in the evaluation and biopsy guidance of suspicious non-mass lesions compared to second-look mammography.

Microplastics from face masks: Unraveling combined toxicity with environmental hazards and their impacts on food safety.

Microplastics (MPs) refer to tiny plastic particles, typically smaller than 5mm in size. Due to increased mask usage during COVID-19, improper disposal has led to masks entering the environment and releasing MPs into the surroundings. MPs can absorb environmental hazards and transfer them to humans and animals via the food chain, yet their impacts on food safety and human health are largely neglected. This review summarizes the release process of MPs from face masks, influencing factors, and impacts on food safety. Highlights are given to the prevalence of MPs and their combined toxicities with other environmental hazards. Control strategies are also explored. The release of MPs from face masks is affected by environmental factors like pH, UV light, temperature, ionic strength, and weathering. Due to the chemical active surface and large surface area, MPs can act as vectors for heavy metals, toxins, pesticides, antibiotics and antibiotic resistance genes, and foodborne pathogens through different mechanisms, such as electrostatic interaction, precipitation, and bioaccumulation. After being adsorbed by MPs, the toxicity of these environmental hazards, such as oxidative stress, cell apoptosis, and disruption of metabolic energy levels, can be magnified. However, there is a lack of comprehensive research on both the combined toxicities of MPs and environmental hazards, as well as their corresponding control strategies. Future research should prioritize understanding the interaction of MPs with other hazards in the food chain, their combined toxicity, and integrating MPs detection and degradation methods with other hazards.

Enhancing the differential diagnosis of small pulmonary nodules: a comprehensive model integrating plasma methylation, protein biomarkers, and LDCT imaging features

BackgroundAccurate differentiation between malignant and benign pulmonary nodules, especially those measuring 5–10 mm in diameter, continues to pose a significant diagnostic challenge. This study introduces a novel, precise approach by integrating circulating cell-free DNA (cfDNA) methylation patterns, protein profiling, and computed tomography (CT) imaging features to enhance the classification of pulmonary nodules.MethodsBlood samples were collected from 419 participants diagnosed with pulmonary nodules ranging from 5 to 30 mm in size, before any disease-altering procedures such as treatment or surgical intervention. High-throughput bisulfite sequencing was used to conduct DNA methylation profiling, while protein profiling was performed utilizing the Olink proximity extension assay. The dataset was divided into a training set and an independent test set. The training set included 162 matched cases of benign and malignant nodules, balanced for sex and age. In contrast, the test set consisted of 46 benign and 49 malignant nodules. By effectively integrating both molecular (DNA methylation and protein profiling) and CT imaging parameters, a sophisticated deep learning-based classifier was developed to accurately distinguish between benign and malignant pulmonary nodules.ResultsOur results demonstrate that the integrated model is both accurate and robust in distinguishing between benign and malignant pulmonary nodules. It achieved an AUC score 0.925 (sensitivity = 83.7%, specificity = 82.6%) in classifying test set. The performance of the integrated model was significantly higher than that of individual methylation (AUC = 0.799, P = 0.004), protein (AUC = 0.846, P = 0.009), and imaging models (AUC = 0.866, P = 0.01). Importantly, the integrated model achieved a higher AUC of 0.951 (sensitivity = 83.9%, specificity = 89.7%) in 5–10 mm small nodules. These results collectively confirm the accuracy and robustness of our model in detecting malignant nodules from benign ones.ConclusionsOur study presents a promising noninvasive approach to distinguish the malignancy of pulmonary nodules using multiple molecular and imaging features, which has the potential to assist in clinical decision-making.Trial registration: This study was registered on ClinicalTrials.gov on 01/01/2020 (NCT05432128). https://classic.clinicaltrials.gov/ct2/show/NCT05432128.

FEATURES OF THE FORMATION OF THE PHASE COMPOSITION AND PROPERTIES OF HIGH ALLOY STEEL 03Х17Н3Г9МБДЮЧ

Purpose. Evaluation of the influence of alloying elements of corrosion-resistant steel 03Х17Н3Г9МБДЮч on the phase composition and indicators of high-temperature corrosion. Research methods. In order to check the effect of the chemical composition on the structure of steel 03Х17Н3Г9МБДЮч, laboratory steels were made. The production of these steels was carried out in an induction furnace with a main lining with a capacity of 50 kg. The resulting castings were forged into blanks 40 ´ 80 ´100 mm in size, with subsequent hot rolling into samples 25, 20, and 15 mm thick. Determination of the yield strength of steels was carried out after exposure at a temperature of 850 °С for 10,000 hours. The corrosion resistance of the test samples was determined by the gravimetric method after the samples were completely immersed in molten magnesium. Results. The choice of the main alloying elements was justified and their influence on durability in the aggressive environment of the recovery process of spongy titanium production was determined. A thermodynamic calculation of the changed Gibbs energy in the operating temperature range was performed. The required phase ratio of 03Х17Н3Г9МБДЮч steel was considered and selected based on Scheffler de Long and Potak-Sahalevich diagrams. Scientific novelty. The effect of changing the chemical composition of steel 03Х17Н3Г9МБДЮч within technical conditions on the creep limit and durability in the aggressive environment of the recovery process of the production of spongy titanium was determined. Practical value. It is shown that the alloying complex of corrosion-resistant steel is capable of significantly improving the physical, mechanical and technological properties, and expanding the functional application (purpose).

Morphological and molecular characterization of Henneguya cardii n. sp. (Cnidaria: Myxosporea) from the bulbus arteriosus of European seabass Dicentrarchus labrax (Teleostei: Moronidae).

A new species of Myxobolidae, Henneguya cardii n. sp., is described infecting the European seabass Dicentrarchus labrax, a fish of high commercial value intensively cultivated in southern Europe. Henneguya cardii n. sp. was found in the bulbus arteriosus and spleen with a prevalence of infection of 13.5%. In the heart, it forms irregular whitish plasmodia measuring 1 mm in size. Mature myxospores are broadly obovoid in frontal view and ellipsoidal in lateral view, with 2 equal caudal appendages. Polar capsules are ovoid and symmetric, with 3–4 polar tubule coils. Myxospores measure 10.2 ± 0.6 (8.8–11.6) μm in length, 8.0 ± 0.7 (5.3–8.8) μm in width and 5.6 ± 0.2 (5.1–6.4) μm in thickness. Caudal appendages are 36.6 ± 3.2 (27.4–42.9) μm long. Total spore length is 47.6 ± 3.2 (41.2–53.2) μm. Polar capsules measure 4.0 ± 0.2 (3.4–4.6) by 2.2 ± 0.1 (1.9–2.6) μm. Small subunit ribosomal RNA-based tree topologies position H. cardii n. sp. within a lineage of marine myxobolids that is mostly comprised of other Henneguya species. Host-relatedness is reinforced as the main evolutionary driver for myxobolids, with the positioning of H. cardii n. sp. further suggesting tissue tropism as another important evolutionary driver for marine heart infecting Henneguya. Nonetheless, the inner complexity of this lineage suggests that identification of the evolutionary patterns driving its phylogeny will require discovery of the true diversity of marine myxobolids.

Wrapping method for better fat handling in endoscopic trans-sphenoidal surgery.

Fat is commonly used for preventing cerebrospinal fluid (CSF) leakage during endoscopic transsphenoidal surgery (ETSS). However, fat is soft, slippery, and sometimes not easy to handle. The present study aimed to examine the efficacy of our Surgicel® wrapping method, which allows for better fat handling, in preventing the occurrence of CSF leakage among patients undergoing ETSS. We used fat tissues removed from the abdomen. The fat was cut with scissors into pieces that were approximately 5 mm in size. Surgicel® was also cut into 2.5 cm2. The fat tissues were encased with these Surgicel® squares and slightly moistened with a saline solution. Between January 2023 and August 2024, 34 patients aged 18-86 years (average 54.9 years) underwent ETSS. Among these patients, 20 had pituitary tumors, 6 had Rathke's cysts, and 8 had other conditions. None of the patients had CSF leakage postoperatively. The use of Surgicel®-wrapped fat during ETSS is better than the use of fat alone. The Surgicel® wrapping method allows for better fat handling during ETSS.

Passing plastic: Traces of plastic in the fecal samples of a high Arctic seabird in Tunu (East Greenland)

Arctic seabirds are key bio-indicators of marine plastic pollution due to their transient movement and large populations. Although many studies have quantified the ingestion of microplastic particles (&lt;5 mm in size) through necropsy or regurgitation sampling methods, little is known about post-digestive particle excretion. Due to the logistical challenges of non-lethally sampling feces from Arctic seabirds, this pathway remains largely understudied. We non-lethally collected 110 fecal samples from little auks (Alle alle) during the 2014 breeding season in Ukaleqarteq, Tunu (Kap Höegh, East Greenland). We identified 25 potential microplastic particles (&gt;100 µm in size), 19 of which were analyzed for material composition using Fourier Transform Infrared Spectroscopy and Raman micro-spectroscopy. Of these, 13 particles were successfully matched to materials, with five as plastic. This produced an average concentration of 0.08 ± 0.28 microplastic particles per fecal sample, with no difference of occurrence between chicks and adults. Particle lengths ranged from 113 - 751 µm. The presence of microplastics larger than our lower limit of detectability of 100-µm suggests a need for analysis of smaller particles and microfibers in this species. We contribute to understanding how microplastics pass through little auks and characterize how this species interacts with the plastic pathways.

Treatment of polyethylene microplastics degraded by ultraviolet light irradiation causes lysosome-deregulated cell death

BackgroundMicroplastics (MPs), plastic particles < 5 mm in size, are prevalent in the environment, and human exposure to them is inevitable. To assess the potential risk of MPs on human health, it is essential to consider the physicochemical properties of environmental MPs, including polymer types, size, shape, and surface chemical modifications. Notably, environmental MPs undergo degradation due to external factors such as ultraviolet (UV) rays and waves, leading to changes in their surface characteristics. However, limited knowledge exists regarding the health effects of MPs, with a specific focus on their surface degradation. This study concentrates on cytotoxic MPs with surface degradation through UV irradiation, aiming to identify the mechanisms underlying their cell toxicity.ResultsPolyethylene (PE) and surface-degraded PE achieved through UV light irradiation were employed as model MPs in this study. We explored the impact of PE and degraded PE on cell death in murine macrophage cell line RAW264.7 cells and human monocyte cell line THP-1 cells. Flow cytometric analysis revealed that degraded PE induced programmed cell death without activating caspase 3, while non-degraded PE did not trigger programmed cell death. These findings suggest that degraded PE might induce programmed cell death through mechanisms other than caspase-driven apoptosis. To understand the mechanisms of cell death, we investigated how cells responded to degraded PE-induced cellular stress. Immunofluorescence and western blotting analyses demonstrated that degraded PE induced autophagosome formation and increased p62 expression, indicating inhibited autophagy flux after exposure to degraded PE. Furthermore, degraded PE exposure led to a decrease in acidic lysosomes, indicating lysosomal dysregulation. These results imply that degraded PE induces lysosomal dysfunction, subsequently causing autophagy dysregulation and cell death.ConclusionsThis study unveils that UV-induced degradation of PE results in cell death attributed to lysosomal dysfunction. The findings presented herein provide novel insights into the effects of surface-degraded MPs on biological responses.

A Comparative Study of Non-Destructive Testing Techniques: Active Thermography versus Shearography for 3D-Printed Thermoplastic Composites Reinforced with Continuous Carbon Fiber

This study investigates the feasibility and effectiveness of two non-destructive testing methods, active thermography and shearography, on 3D-printed thermoplastic (TP) composites reinforced with continuous carbon fiber. Artificial defects were introduced into the composite plate to benchmark the detection capabilities of these non-destructive testing techniques (NDT). Active thermography produced a thermogram that highlighted defects through variations in surface temperature. Although effective for identifying defects ranging from 3 to 10 mm in size at four different depths, specifically 1 mm, 1.25 mm, 1.5 mm, and 1.75 mm, through the thickness of a 2.8 mm plate, the method encountered some limitations. It faced challenges in detecting deeper defects and accurately determining their shapes. Shearography, which utilizes fringe pattern distortions to detect surface displacement anomalies, successfully identified near-surface defects within the same size range. However, it required more expertise for accurate interpretation and struggled with detecting smaller and deeper defects. The complementary strengths and limitations of these methods suggest that employing both could offer a more comprehensive solution for defect detection in 3D-printed TP composites.

Microplastic pollution in Taihu Lake: Spatial distribution from the lake inlet to the lake centre and vertical stratification in the water column

The aim of this study was to analyse the distribution characteristics of microplastics in lakes, assess their potential impacts on ecosystems, and explore effective management and control strategies. Despite a wealth of research focused on lake water, the variations in microplastics with offshore distance and their vertical distribution within the water column are not well understood. Here, we investigated the freshwater continuum from the inlet of Taihu Lake to the centre, and vertically from the surface to the bottom water. The results revealed that the distribution of microplastics (<5 mm in size) exhibited a clear spatial gradient. The microplastic abundance at the lake entrance was 2.12 times greater than that at the centre, and on the lake surface, the microplastic abundance was 1.36–1.69 times higher than that estimated from the water column. Notably, the proportion of small-sized microplastics (<0.1 mm) in the bottom water was 1.72 times higher than that in the surface water. The main types of polymers identified were polyamide (PA) and polyvinyl chloride (PVC), and their main sources may be from clothes washing and industrial activities. The Monte Carlo simulation results indicated that the overall risk of microplastics in surface water was higher than that in the water column, and the contributions of PVC and polyurethane (PU) to the ecological risk were 90.10% and 9.57%, respectively. Therefore, PVC and PU should be the priority of microplastic pollution control. This study provides the first comprehensive evaluation of the spatial ecological risk of microplastics in Taihu Lake, which improves our understanding of the distribution and environmental risks of microplastics in lake systems.

The first experience of multi-modal in vivo PET/SPECT/CT and MRI imaging of laboratory mice with melanoma B16F10 (short message)

Background. For in vivo determination of size and metabolic characteristics of model tumors in laboratory animals, it is recommended to use imaging methods: positron emission tomography (PET), single-photon emission computed tomography (SPECT), computed tomography (CT) and magnetic resonance imaging (MRI). Due to the limited availability of hybrid scanners, it is necessary to investigate the feasibility of obtaining tomograms on separate devices with subsequent geometric comparison of images.Aim. To investigate the feasibility of multimodal imaging of mice with subcutaneous melanoma B16F10.Materials and methods. PET, SPECT and CT were performed using a preclinical VECTor 6 tomograph (MILabs, the Netherlands), MRI was performed using a preclinical nanoScan® 3T tomograph (Mediso, Hungary). The following modality combinations were studied: MRI and PET / CT with 18F-fluorodeoxyglucose; MRI and PET / CT with 18F-boronphenylalanine; MRI and PET / SPECT / CT with 18F-fluoroethyltyrosine (18F-FET) and 177lutetium – prostate-specific membrane antigen (177Lu-PSMA). Mice were immobilized in a custom-made device during scanning and during movement between tomographs. PET and MRI, SPECT and MRI images were fused in the program InterView FUSION 3.09.008.0000 through an intermediate stage of fusion with CT.Results. Multimodal PET / CT / MRI and PET / SPECT / CT / MRI images of tumor-bearing mice were obtained for the first time in Russia. PET / MRI data confirmed development of the tumor from 6 × 4 × 4 mm in size. PET / SPECT / CT / MRI enabled to image visceral organs with high accumulation of radionuclide tracers: pancreas with 18F-FET (standardized uptake value 2.6) and kidneys with 177Lu-PSMA (standardized uptake value 4.4), while the obtained images of organs did not merge and did not overlap.Conclusion. Multimodal imaging enables the selection of experimental animals with tumors of specific size and metabolic activity for the study of new radiopharmaceuticals, including those with vector delivery.

An overview on the characterization of microplastics (MPs) in waste water treatment plants (WWTPs)

The occurrence of microplastics (MPs) in the environment has become an emerging global concern and has been reported to pose consequential risks to organisms, human health and the environment. Due to their small size (ranging from 1 μm to 5 mm in size), eliminating MPs from wastewater poses a significant challenge, which leads to their accumulation in wastewater treatment plants (WWTPs). This review article explores the method of characterizing MPs in WWTPs to understand their environmental impact better. It also discusses various techniques for characterising MPs in WWTPs, drawing on existing scientific literature. The article provides a comprehensive review of the current methodologies used for the characterisation (chemical, morphology, thermal) of MPs in WWTPs. Furthermore, analytical techniques such as scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR) and Raman spectroscopy are discussed along with their limitations and potential for recognition and differentiation of various kinds of MPs. The article also highlights the need for standardisation of sampling, extraction, and analytical methods to ensure comparability of results from different studies. The review identifies several obstacles in characterising MPs within WWTPs, such as the absence of standardised methods, restricted detection thresholds, and challenges in quantifying MPs within intricate environmental contexts. To overcome these obstacles, the review recommends prioritising research efforts aimed at enhancing current methodologies, emphasising the need to refine techniques for better comprehension and analysis of MPs within WWTPs.

Microplastic accumulation and transport in agricultural soils with long-term sewage sludge amendments

Land application of sewage sludge brings microplastic contamination to soil. However, studies regarding the occurrence and mobility of sludge-borne microplastics in soil are insufficient. In the present study, based on an experimental field, the effects of sludge application amount on the accumulation and migration of microplastics in 0–20 (upper) and 20–40cm (lower) soil layers were evaluated. After 16 years of continuous sludge application (36 t/ha per year), the microplastic content and migration ratio in upper soil reached 6,811 particles/kg and 148%, which was about 5 and 20 times, respectively, higher than that of the control soil without sludge. The microplastics in upper and lower soil layers, were mainly 0.2–0.5mm in size, mostly fibrous in shape, primarily transparent in color, and predominantly rayon in composition. Microplastic surfaces may persistently adsorb clay minerals and iron/titanium oxides from soil, posing potential environmental risks. Sludge application had a significant positive correlation with soil microplastic abundance, resulting in a good fit of predictive model constructed for microplastic accumulation in sludge-amended soils. These findings help to improve the knowledge on environmental behavior of microplastics in sludge-amended soil, and can provide a scientific basis for the regulation of microplastic pollution during sludge land application.

Does the guide sheath outperform the non-guide sheath method in endobronchial ultrasound-guided biopsy of peripheral pulmonary lesions?-a meta-analysis.

Endobronchial ultrasound (EBUS)-guided transbronchial biopsy with or without a guide sheath (EBUS-GS or EBUS-nGS) is commonly utilized for the diagnosis of peripheral pulmonary lesions (PPLs). The primary objective of this meta-analysis is to assess the diagnostic yield, surgical time, and safety of EBUS-GS and EBUS-nGS in patients presenting with PPLs, providing valuable insights for clinical decision-making. We conducted a systematic search of four databases (PubMed, Embase, Web of Science, Cochrane Library) up to January 2024. Two researchers independently screened the retrieved articles, extracted the data, assessed the quality of the studies, and conducted statistical analysis through Review Manager 5.4 and STATA 14.0. Subgroup analysis was used to explore potential sources of heterogeneity. Publication bias was assessed through funnel plot tests. Sensitivity analyses were also performed to evaluate the robustness of the combined results. The meta-analysis included data from nine studies comprising 2,898 patients. No publication bias was detected. There was no difference in the overall diagnostic rate of EBUS-GS and EBUS-nGS for PPLs [odds ratio (OR): 0.83, 95% confidence interval (CI): 0.64-1.08, Z-score (Z) =1.37, P=0.17]. Conversely, in cases utilizing a bronchoscope with an outer diameter of 3.0 mm (OR: 0.58, 95% CI: 0.40-0.84, Z=2.86, P=0.004), a 1.7-mm bronchoscope channel (OR: 0.70, 95% CI: 0.51-0.96, Z=2.21, P=0.03), or lesions ≤30 mm in size, or lesions situated in the lower lobe of the lung (OR: 0.59, 95% CI: 0.38-0.91, Z=2.36, P=0.02), the diagnostic rate was higher in the EBUS-nGS group. However, the EBUS-GS group demonstrated a tremendous advantage in terms of safety (OR: 0.64, 95% CI: 0.44-0.93, Z=2.33, P=0.02). EBUS-GS and EBUS-nGS showed no significant difference in the overall diagnostic rate for PPLs. When using a bronchoscope with an outer diameter of 3.0 mm or a channel diameter of 1.7 mm, or when lesions are ≤30 mm or located in the lower lobe of the lung, EBUS-nGS demonstrated a higher diagnostic rate, and EBUS-nGS demonstrated a higher diagnostic rate. However, EBUS-GS exhibited more tremendous advantages in terms of safety.

Microplastics in Farmed Animals—A Review

Environmental pollution from plastics has become one of the biggest concerns globally. Microplastics (MPs) are plastic materials less than 5 mm in size. They remain in the environment for hundreds to thousands of years without degrading, only breaking down further to nanoplastics (NPs). Micro- and nanoplastics can be the origin of many diseases and can carry various pathogenic substances on their surface and spread them throughout the biosphere, starting with contained additives and ending with adsorbed toxins from the environment and potentially pathogenic microorganisms. Exposure routes for humans and animals are through air, water and food/feed. Due to the placement of livestock—including ruminants, fish and poultry—and humans at the top of the food web, any pollution in water, air or soil can eventually be transferred to livestock and from livestock to humans. The presence of microplastics in the intestines of aquaculture species, ruminants and poultry, for instance, was found to cause a change in the intestinal microbial population and, as a result, the occurrence of diseases. These particles have also been observed in other organs such as liver, kidneys, lung, spleen, heart, ovaries, and testicles of animals, which causes biochemical changes, structural destruction, and malfunction. While the complete extent of the negative health impacts of microplastics remains still largely unknown, their ubiquitous presence and the transmission of chemicals from microplastics to organisms is a notable issue, underscoring the importance of gaining a more comprehensive understanding of the potential threats posed by microplastics to animal and ultimately human health, coupled with a need for drastic reduction of the plastic freight into the environment. This review article summarizes recent findings on the effect of micro- and nanoplastics on farmed animals and, ultimately, on humans. Action is needed to reduce the number of microplastics to which farmed animals, and thereby humans, are exposed.