Mixed Water Research Articles

Monitoring the spatial evolution of groundwater quality during its diversion in the drinking water supply network in arid areas, case of Bechar city (Algeria Sahara)

Climate change has clearly affected the desert city of Bechar, located in southern Algeria, and this miserable situation for the supply of drinking water prompted the authorities to provide capabilities and funds to bring groundwater located 250 km away and transfer it to the city of Bechar. The characterization of these underground waters presents a bicarbonate-magnesian facies according to the diagram of Schöeller and Berkaloff; the representation of the data on the triangular Piper diagram shows that Boussir ground water has the magnesium bicarbonate facies. The calculation of the quality index (GWQI) shows that all samples taken from the boreholes belong to the good quality category. The long distance of diversion of this underground water and the quality of the materials used in the project under a dry desert climate made us carry out the process of monitoring and tracking the quality of the water from the well until it reaches the consumer. The results revealed that all the levels of the physic-chemical parameters do not exceed the WHO portability standards, except that a variation of certain values was observed at the level of the storage tank, this variation due to the mode of filling and the mixing of water in tubular form, without eliminating the effect of water stagnation. If we technically know how to produce high-quality drinking water, we cannot always ensure a safe and sustainable water supply of the same quality in distribution networks and reservoirs; it is from this principle that our article is based in order to reinforce the monitoring role.

Highly Efficient Conversion of Salinity Difference to Electricity in Nanofluidic Channels Boosted by Variable Thickness Polyelectrolyte Coating.

The inherent limits of the current produced by imposing salinity gradients along a nanofluidic channel having "hard" boundary walls heavily constrain the resulting energy harvesting efficacy, acting as major hindrances against the practicability of harnessing high power density from the mixing of water having different salinities. In this work, the infusion of variable-thickness polyelectrolyte layer of a conical shape is projected to augment salinity gradient power generation in nanochannels. Such a progressive thickening of a charged interfacial layer on account of axially declining ion concentration facilitates the shedding of enhanced numbers of mobile ions, bearing a net charge of equal and opposite to the surface-bound ions, into the mainstream current flow. We show that the proposed design can convert energy at a higher efficiency as compared to both solid-state and available polyelectrolyte layer (PEL)-covered nanochannels. The same is true for the maximum power density at moderate and high concentration ratios including natural salt gradient conditions for which more than 50% increase is achievable. The maximum values achieved for efficiency and power density read 50.3% and 6.6 kW/m2, respectively. Our results provide fundamental insights on strategizing variable-thickness polyelectrolyte layer grafting on the nanochannel interfaces, toward realizing high-performance osmotic power generators by altering the local ionic clouds alongside the grafted layers and enhancing the ionic mobility by inducing a driving potential gradient concomitantly. These findings open up a new strategy of efficient conversion of the power of the salinity difference of seawater and river water into electricity in a nanofluidic framework, surpassing the previously established limits of blue energy harvesting technologies.

Optimal conditions for nano-emulsified vegetable oil synthesis for the biostimulation of 1,1,2-trichloroethane and vinyl chloride contaminated groundwater in bioreactors

Contamination of groundwater with chlorinated aliphatic hydrocarbons (CAHs) has become increasingly widespread. Enhanced reductive dechlorination (ERD) by emulsified vegetable oil (EVO) is an environmentally friendly, low-carbon and sustainable technology that effectively eliminates the threat from CAHs. To improve the permeability and bioavailability of EVO in the low-permeability substratum, nano-emulsified vegetable oil (nanoEVO) can be synthesized using a modified phase inversion composition method (MPIC) by increasing the emulsification temperature that reduces the shear force required for the formation of nanodroplets and the interfacial tension between the mixed phase and water. The emulsification temperature of 60 °C, the water content of 40–70%, the droplet diameter (DD) of nanoEVO prepared by MPIC is ∼200 nm, and had good monodispersion (≤0.2). The high molecular weight and low solubility of vegetable oil, and similar size of droplet make nanoEVO remains homogeneous after storage for > one year. NanoEVO can effectively biostimulate indigenous bacteria in CAHs-contaminated groundwater to dechlorinate 1,1,2-trichloroethane (1,1,2-TCA) to ethene via vinyl chloride (VC). The maximum dihaloelimination rate of 1,1,2-TCA was ∼66.06 μM·Cl−·day−1 and the maximum hydrogenolysis rate of VC was ∼35.67 μM·Cl−·day−1. NanoEVO effectively increased the relative abundance of Dehalococcoides from <0.10 to 9.61%. The abundances of Dhc 16S rRNA gene and dehalogenase gene vcrA increased by 102 and 103, respectively. Biostimulation shaped the structure of microbial communities and promoted hydrolytic acidification and anaerobic fermentation. Moreover, the syntrophic VFA-oxidizing bacteria participated in secondary fermentation and were closely correlated with H2 consumption metabolism. By providing carbon sources and maintaining an anaerobic environment with stable pH and ORP, nanoEVO biostimulated the hydrolytic acidification led by fermentative bacteria, secondary fermentation with syntrophic VFA-oxidizing bacteria and reductive dechlorination carried out by dechlorinator, thus greatly increasing the CAH-dechlorinating ability of indigenous microbial communities.

Effect of Water and Rice Husk Ratio in Water-Based Planting Medium on Growth of Three Rice Varieties (Oryza sativa L.)

The agricultural sector faces two serious threats: declining production due to agricultural land conversion and water shortages due to global warming. Therefore, an agricultural system that accommodates the use of vacant land and water saving, in this case, urban farming with the use of soil-less media can be applied. In recent studies, both innovations have shown positive results in various commodities but have not been explored much specifically for rice crops. This study observed the effect of soilless media application (mixed water and rice husks media) on the growth of rice. This experiment was conducted in Sumber Jeruk, Jember (altitude 281 m asl, temperature 21-31°C, RH 65-75%), January-June 2022. The experiment used a completely randomized design with two factors and three replications. The first factor was the ratio of water to rice husk (1:0; 4:1; and 8:1). The second factor was rice varieties (Inpari 46, IR 64, and Mapan 05). The combination of Mapan 05 and media ratio 4:1 showed the highest result on shoot fresh weight (351.95 g) and root fresh weight (346.35 g). Meanwhile, the highest number of root length (45.20 cm) was found in the combination of Mapan 05 and media ratio 8:1. Moreover, Mapan 05 (93.94 cm) and Inpari 46 (93.88 cm) showed no significant difference in plant height. It can be concluded that soil-less media 8;1 promotes the highest result on rice plant growth observed.

Exploring the complex association between urban form and crime: Evidence from 1,486 U.S. counties

Urban form contributes to crime prevention. However, most studies not only simplify the relationship between urban form and crime, they also fail to reflect the geographic structure of urban areas. This study first measured a comprehensive multidimensional urban form indicator for 1486 counties in the United States, which was used to characterize the size and geospatial structure of urban areas. Specifically, it described urban form as consisting of three components: 1) size and population distribution; 2) built environment; and 3) landscape environment. Then, generalized additive mixed models were then used to explore linear or nonlinear associations between urban form indicators and different crime types (violent and property crime). This study's main findings were that 1) the relationship between urban form and crime is not only linear but may also be nonlinear; 2) urban size, fragmentation, connectivity, forest mixing, and shrub mixing are associated with all crime types; 3) population distribution and agricultural mixing are associated with violent crime; and 4) urban patch complexity and water mixing are associated with property crime. Overall, the results of this study can provide guidance for long-term planning of urban geographic structures, contributing to the safe and sustainable development of urban areas.

Research on intelligent identification and resource utilization of TBM muck in breezy granite strata

Tunnel boring machines (TBMs) excavating breezed granite strata produce a lot of muck, including rock powder and gravel. To promote waste recycling and environmentally friendly muck utilization, a series of studies was conducted on the intercity railway section from ShenZhen Airport East Station to HuangMaBu Station in China. First, the muck image dataset was obtained using a camera, and the SAM-YOLO neural network model was adopted to intelligently identify the features of the particle size and content of the muck. Subsequently, the muck was used as an alternative material for the backfill slurry raw material, and the optimal slurry ratio was determined through laboratory tests. Finally, a new backfill slurry was applied on-site. The results demonstrated that the established SAM-YOLO model can accurately and quickly identify muck characteristics, which can be roughly classified by particle size into three categories: rock powder (0-5 mm), gravel (5-10 mm), and crushed rock (10-31.5 mm). Rock powder was utilized to make the monomortar, gravel was used for backfilling, and the crushed rock was broken again to gravel particle size to be used for backfilling. The laboratory test and field application results indicated that the new monomortar can fulfil engineering requirements after the backfilling of gravel, and the optimal water, cement, and rock powder mix ratio is 0.9:1.0:1.0. This research thus provides effective guidance for the utilization of muck in similar projects.

Droplet motion driven by humidity gradients during evaporation and condensation

The motion of droplets on solid surfaces in response to an external gradient is a fundamental problem with a broad range of applications, including water harvesting, heat exchange, mixing and printing. Here we study the motion of droplets driven by a humidity gradient, i.e. a variation in concentration of their own vapour in the surrounding gas phase. Using lattice-Boltzmann simulations of a diffuse-interface hydrodynamic model to account for the liquid and gas phases, we demonstrate that the droplet migrates towards the region of higher vapour concentration. This effect holds in situations where the ambient gradient drives either the evaporation or the condensation of the droplet, or both simultaneously. We identify two main mechanisms responsible for the observed motion: a difference in surface wettability, which we measure in terms of the Young stress, and a variation in surface tension, which drives a Marangoni flow. Our results are relevant in advancing our knowledge of the interplay between gas and liquid phases out of thermodynamic equilibrium, as well as for applications involving the control of droplet motion.Graphic abstract

Effect of parameter optimization on the flow characteristics of venturi-self-excited oscillation mixer based on response surface model and multi-island genetic algorithm

The present study focuses on the development of a novel venturi-based self-excited oscillation mixer that effectively utilizes the venturi effect to facilitate efficient abrasive intake while simultaneously ensuring effective prevention of backflow through the utilization of the systolic section within the venturi tube. It not only ensures uniform mixing of water and abrasive but also transforms the continuous jet into a pulsed one, thereby significantly enhancing exit velocity. The orthogonal experimental design method and single factor experiment method were employed to investigate the effects of inlet water pressure, water nozzle diameter, abrasive inlet angle, aspect ratio of the self-excited oscillation mixer, and abrasive pipe inlet diameter on the inlet pressure of the abrasive pipe and the velocity of the jet exit in the new mixing device. Approximate response surface models for these parameters were constructed using lsight optimization software, combining the results of orthogonal experimental simulation. By employing a multi-island genetic algorithm, we have globally optimized this innovative mixing device to determine its optimal performance parameters. Subsequently, comparative experiments were conducted to validate the performance of different mixing devices in descaling applications. Through experimental verification, it was found that the venturi-self-excited oscillation mixer exhibits excellent rust removal capabilities in steel plate tests compared to traditional self-excited oscillation mixers. These findings provide valuable guidance for the subsequent design and enhancement of abrasive water jet mixers.

Rheological properties of high-performance SCC using recycled marble powder

Due to the impacts of cement manufacturing and depletion of the natural aggregates for concrete production, recycling of construction and demolition waste materials has become an alternative replacement to natural materials that lower their consumption and satisfy the environment. One of these alternatives is replacing cement with recycled materials from marble, ceramic, granite, and concrete wastes or even replacing the coarse aggregate with crushed marble and other stone wastes. Marble, granite, and natural stone wastes rapidly increase each year due to unmanaged waste disposal processes and the incremental increase in construction potential. Marble slurry, which comes from washing and cleaning marble surfaces, shows a filler effect by giving the concrete a denser and homogenous structure. This study evaluates the marble filler effects on the rheology in the fresh state of self-compacting concrete (SCC) through four SCC mixes by incorporating 10% marble powder (MP) and 33% fly ash (FA) as a partial ordinary Portland cement (OPC) replacement. Tests on paste and mortar were conducted to assess the suitability of the marble dosage on the water content and the superplasticizer amount. Spread flow and V-funnel tests were assessed. The results showed that mixes with MP required additional mixing water to ensure the same workability. Regardless of the high viscosity and air content, the overall developed marble SCC mixes reduced the cement quantity by up to 11% and provided excellent rheological properties like that of the reference mix. Besides the economic benefits, this transformation of waste to valuable materials involves environmental advantages and sustainability promotion.

Fresh, hardened, durability and microstructure properties of seawater concrete: A systematic review

Seawater concrete (SWC) is an environmentally friendly construction material that addresses freshwater scarcity concerns by utilising seawater as a mixing water source. This review study comprehensively examines SWC by focusing on its fresh properties, hardened properties, seawater composition, microstructure and porosity, hydration process, durability, test methods and electrical resistivity. The study analyses the influence of additives and admixtures on SWC’s performance by considering constituents such as cement, aggregates and seawater. It also explores the impact of manufacturing techniques, including mix design. The potential of SWC is revealed and compared with that of conventional concrete by evaluating and comparing their mechanical properties, such as compressive strength, modulus of elasticity, stress-strain behaviours, tensile strength and flexural strength. This study primarily aims to thoroughly examine the characteristics of SWC in its fresh and hardened states. It also assesses the advantages and drawbacks of seawater as a mixing water source. Moreover, this study delves into the impact of seawater composition on crucial aspects, such as the hydration process, microstructure and porosity of concrete. It also used various test methods to explore SWC durability, including resistance to chloride ingress, sulphate attack and carbonation. Furthermore, the importance of electrical resistivity for corrosion prevention is discussed in this study. The carbon-negative cement production and carbonation curing of seawater concrete underscore groundbreaking advancements, emphasizing sustainability and climate mitigation in the construction industry. Overall, this study aims to enhance the comprehension of SWC and provide valuable insights for engineers, researchers and policymakers in concrete technology.

Aluminium Determination in Foodstuffs by ICP-MS: Influence of Microwave Digestion Parameters on the Recovery

Aluminium (Al) is the third most common element in the Earth’s crust and occurs naturally in drinking water and agricultural products, and humans are consequently exposed to the element from dietary sources. A tolerable weekly intake of 1 mg/kg has been established by the European Food Safety Authority (EFSA); however, no maximum levels for aluminium in foodstuffs have so far been established in the European Union (EU) legislation. Official food control requires validated methods for the determination of aluminium. Acid digestion assisted by microwaves is the main sample preparation technique used for the determination of aluminium, usually in combination with atomic spectrometry for quantification. In the present study, different parameters in the digestion step were investigated including test portion, digestion temperature, the reagent used and duration of the digestion to assess the aluminium extraction. The presented work is following up on an observation from a proficiency test (PT) on trace elements (including aluminium) in cocoa powder organised in 2020 by the European Union Reference Laboratory for metals and nitrogenous compounds in feed and food (EURL-MN), where the participant results for aluminium showed an unexpectedly large variation. In addition to the PT material, different certified reference materials were included in the present study, and the results highlighted that the temperature and reagent used are the most critical parameters to obtain a satisfactory sample digestion prior to aluminium determination. Based on the obtained results, it is recommended to digest food samples with a mix of ultrapure water and nitric acid for 25 min at a temperature of at least 240 °C with a mix of HNO3 and H2O to achieve satisfactory microwave-assisted digestion.

Preparation and hydration of low-carbon UHPC with high fraction of activated tuff and recycled fine powders

Due to the high energy consumption and carbon emission of cement, using active supplementary materials in concrete is widely studied. In this paper, waste tuff micropowder and recycled fine powder (RFP) with maximum replaced ratio of 70 % were investigated by alkali activation in ultra-high performance concrete (UHPC), the mechanical properties and hydration process were studied with different dosages and activators. The results show that the strength activity index of tuff and RFP both enhanced after calcium hydroxide activation. The alkali activator accelerated the hydration speed of tuff and RFP, also leaded to a low heat generated. The compressive strength was reduced with the replaced ratio of tuff and RFP, but the flexural strength was improved once tuff added and cured in appropriate temperature. In the cement-tuff/RFP system, calcium hydroxide accelerates cement hydration and activates part of the tuff and RFP to generate C-(A)-S-H to improve the strength of the mortar. Due to the low degree of tuff activation, less hydration products were formed, leaded to an increase in porosity. The RFP was effectively activated by calcium hydroxide, and the generated C-(A)-S-H and CaCO3 effectively refined the pore structure. The activation of RFP consumed limited mixing water, while the excessive CaCO3 generated by activation will cause the loss of UHPC strength.

Numerical Simulation of the Mixing and Salt Washing Effects of a Static Mixer in an Electric Desalination Process

Electric desalination units in the crude oil refining process are becoming increasingly important with the growing trend towards heavy and poor crude oils. The oil–water mixing effect of the static mixer plays a crucial role in the electric desalination process. The present study investigated the effect of various variables, such as mixer type, number of mixing elements, washing water consumption, and oil viscosity and density on the oil–water mixing efficiency of a static mixer. In addition, this study also analyzed the effect of these variables on the salt washing process that occurs during mixing using a kinetic equation for the dissolution of inorganic salts. The results showed that the number of mixing elements was the most significant variable, followed by the amount of washing water injected. The density of the crude oil had a negligible effect. Based on these results, the use of four mixing elements in the SMX static mixer was recommended. The injection of washing water should be controlled at about 8%, while ensuring that the interfacial tension between oil and water remains below 0.01 N/m. Under these conditions, the salt washing efficiency reached 46.3%. This study provides a theoretical basis for designing static mixers and optimizing their operation in electric desalination processes.

Self-assembly of peptide nanocapsules by a solvent concentration gradient.

Biological systems can create materials with intricate structures and specialized functions. In comparison, precise control of structures in human-made materials has been challenging. Here we report on insect cuticle peptides that spontaneously form nanocapsules through a single-step solvent exchange process, where the concentration gradient resulting from the mixing of water and acetone drives the localization and self-assembly of the peptides into hollow nanocapsules. The underlying driving force is found to be the intrinsic affinity of the peptides for a particular solvent concentration, while the diffusion of water and acetone creates a gradient interface that triggers peptide localization and self-assembly. This gradient-mediated self-assembly offers a transformative pathway towards simple generation of drug delivery systems based on peptide nanocapsules.

Iron transformation and hydroxyl radical production during mixing surface water and groundwater in the riparian zone: Effects of bicarbonate and surface water-groundwater ratio

The interaction between surface water and groundwater in the riparian zone significantly influences iron (Fe) transformation. This study characterized the Fe mineral composition of sediments collected from the riparian zones upstream and downstream of the Xinglong Dam of Han River, China. The coexistence of divalent (Fe–CO3) and Fe(III) minerals in the sediments suggested varying redox conditions of the riparian zone. Furthermore, the transformation processes of dissolved Fe(II) under different bicarbonate concentrations and surface water-groundwater ratios during the interaction between surface water and groundwater were investigated by laboratory batch experiments to understand the formation of Fe–CO3 and Fe(III) minerals in the riparian zone. The results demonstrated that elevated bicarbonate concentrations (0–20 mM) and surface water ratios promoted the transformation rate and amount of dissolved Fe(II) to solids. The predominant minerals of the formed solid were lepidocrocite, goethite, and Fe–CO3, according to the results of X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared (FTIR) spectroscopy. The rising bicarbonate concentration facilitated Fe–CO3 synthesis. The Fe(III) mineral (goethite) was more likely to develop when dissolved oxygen (DO) and bicarbonate concentrations were high. The generated hydroxyl radical (•OH) during dissolved Fe(II) oxidation was also increased with elevated HCO3− concentration and surface water ratio, indicating higher oxidative potential in the riparian zone with higher bicarbonate and surface water ratio. These findings offer insights into the Fe transformation in redox-fluctuating zones.

Influence of superabsorbent polymers on the chloride ingress of mortar measured by chloride diffusion and a quasi-steady-state migration test

The ingress of chloride ions is a serious threat for concrete structures. Superabsorbent polymers (SAPs) are interesting additions to cementitious systems due to their property of absorbing water during mixing and releasing it at a later time to provide internal curing, thereby reducing shrinkage and promoting durability. In addition, SAPs can improve the regain in impermeability of cracks by swelling and blocking the crack and promoting autogenous healing. The current study investigates the influence of the addition of SAPs without additional mixing water to the chloride ingress in cracked mortar via diffusion and quasi-steady-state migration testing. Filtration tests showed that the charge-screening effect in a NaCl solution is more dominant than for cement filtrate solution during swelling of SAPs. After wet/dry cycling for a month, subsequent chloride diffusion tests with 2 and 6 weeks of exposure showed that the addition of SAPs improved the performance with respect to a reference mix with the same total water-to-cement ratio. A reference mix with the same effective water-to-cement ratio as the SAP mix had a comparable performance to the SAP mix. One set of chloride diffusion experiments showed that the SAP mix was the only one successfully preventing chloride ingress into the deepest zone of the crack. The superior performance of the series with SAPs was also confirmed by migration testing where cracked and healed specimens obtained a migration coefficient which was only 12 % higher than uncracked specimens.

Evaluation of Early-Age Compressive Strength in Winter Prefabrication: A Comparative Study

In the field of prefabrication, the timely demolding of concrete elements is crucial to prevent structural failures during panel lifting. This study investigates the early-age compressive strength of different concrete mixtures by simulating various prefabrication plant scenarios. Special attention is given to winter conditions, where concrete hydration tends to be slower, potentially compromising the minimum compressive strength requirement of 10 MPa. The first scenario (reference), set at an ambient temperature of 20 °C with raw materials at room temperature, establishes the baseline for comparison. Two alternative dispositions are explored: Scenario 2, with an external temperature of 8 °C and the water for mixing at 35 °C, and Scenario 3, with the same external temperature but utilizing a heating hood to maintain the concrete at 35 °C. The experimental results shed light on the effectiveness of different strategies in achieving the desired early-age compressive strength under winter conditions. The use of warm mixing water and heating hoods are evaluated as potential measures to counteract the hydration slowdown. The findings contribute valuable insights for optimizing prefabrication processes in cold weather, ensuring the structural integrity of precast concrete elements.

A Future for Ultra-Low Volume Application of Biological and Selected Chemical Pesticides

There is now increasing awareness that Global temperatures are increasing and one result of this is the movement of more water from the Oceans up into the atmosphere. This increases the amount of rain falling which can have an impact on crops. While the rain can be welcome by the crops, the raindrops can remove any deposits of pesticides applied to control pests of crops, especially if the pesticide had been formulated to mix in water.

Evaluation of water quality and trophic status in relation to seasonal water mixing in a highland Lake Ardibo, Ethiopia.

The aim of the present study was to evaluate the spatio-temporal variability of various physical and chemical parameters of water quality and to determine the trophic state of Lake Ardibo. Water samples were collected from October 2020 to September 2021 at three sampling stations in four different seasons. A total of 14 physico-chemical parameters, such as water temperature, pH, dissolved oxygen (DO), electrical conductivity, turbidity, alkalinity, Secchi-depth, nitrate, ammonia, silicon dioxide, soluble reactive phosphorus, total phosphorus, chloride, and fluoride were measured using standard methods. The results demonstrated that temporal variation existed throughout the study period. Except for turbidity, the water quality of the lake varied significantly within the four seasons (ANOVA, p < 0.05). DO levels decreased significantly during the dry season following water mixing events. Chlorophyll-a measurements showed significant seasonal differences ranging from 0.58 μg L-1 in the main-rainy season to 8.44 μg L-1 in the post-rainy period, indicating moderate algal biomass production. The overall category of Lake Ardibo was found to be under a mesotrophic state with medium biological productivity. A holistic lake basin approach management is suggested to maintain water quality and ecological processes and to improve the lake ecosystem services.

Pore properties and moisture loss of repair mortars under low-impact microwave curing

PurposeMicrowave curing (MC) can facilitate rapid concrete repair in cold climates without using conventional accelerated curing technologies which are environmentally unsustainable. Accelerated curing of concrete under MC can contribute to the decarbonisation of the environment and provide economies in construction in several ways such as reducing construction time, energy efficiency, lower cement content, lower carbonation risk and reducing emissions from equipment.Design/methodology/approachThe paper investigates moisture loss and pore properties of six cement-based proprietary concrete repair materials subjected to MC. The impact of MC on these properties is critically important for its successful implementation in practice and current literature lacks this information. Specimens were microwave cured for 40–45 min to surface temperatures between 39.9 and 44.1 °C. The fast-setting repair material was microwave cured for 15 min to 40.7 °C. MC causes a higher water loss which shows the importance of preventing drying during MC and the following 24 h.FindingsPortland cement-based normal density repair mortars, including materials incorporating pfa and polymer latex, benefit from the thermal effect of MC on hydration, resulting in up to 24% reduction in porosity relative to normal curing. Low density and flowing repair materials suffer an increase in porosity up to 16% due to MC. The moisture loss at the end of MC and after 24h is related to the mix water content and porosity, respectively.Originality/valueThe research on the application of MC for rapid repair of concrete is original. The research was funded by the European commission following a very rigorous and competitive review process which ensured its originality. Original data on the parameters of porosity and moisture loss under MC are provided for different generic cementitious repair materials which have not been studied before. Application of MC to concrete construction especially in cold climates will provide environmental, economic and energy benefits.