Mixed-mode Anion Exchange Research Articles

Automated online solid-phase extraction-tandem mass spectrometry detection for simultaneous analysis of acidic and alkaline catecholamines and their metabolites in human urine

Metabolic dysregulation of catecholamines (CAs) is implicated in various human diseases. Simultaneously analyzing these acidic and alkaline CAs and their metabolites poses a significant challenge for clinical detection. This study introduces an efficient method employing automated online solid-phase extraction coupled with tandem mass spectrometry (aoSPE-MS/MS). The method employs weak cation exchange (WCX) and mixed-mode anion exchange (MAX) adsorbents to fabricate an on-line solid-phase extraction (SPE) column, along with an automated injection and multi-valve switching capabilities. The setup allows for automated extraction and analysis of urine samples in 15 minutes while retaining a wide range of acidic and basic CAs and their metabolites. The applicability of this method was demonstrated by optimising the adsorbent dosage volume, extraction solvent, and extraction rate. The limits of detection (LODs) and limits of quantitation (LOQs) for the 8 CAs and their metabolites were determined using the aoSPE-MS/MS approach, with ranges of 0.0625 ∼ 62.5 ng/mL and 0.125 ∼ 125 ng/mL, respectively. Additionally, assessments were made on the linearity, accuracy, and precision within and between batches, as well as matrix and ionic effects, and spiked recoveries. The study discovered that the aoSPE-MS/MS technique simplifies operation, increases efficiency, saves time, and has low detection and quantification limits when detecting a wide range of acid and alkaline CAs and their metabolites in urine. The study successfully demonstrated the high-throughput and automated detection of the 8 CAs and their metabolites with varying acidity and alkalinity in human urine samples. This method is expected to be a potential powerful tool for clinical detection.

Simultaneous determination of ethyl glucuronide, cocaine, cocaethylene, and benzoylecgonine in hair by using LC–MS/MS

Alcohol and cocaine (COC) are commonly co-used drugs that cause addiction and have harmful effects. Their abuse may threaten the health of the abuser and public safety by causing serious accidents or crimes. The recidivism rate of drug-related crimes closely correlates with alcoholism. Several incidences of alcohol consumption in combination with drug abuse have been reported. Here, liquid chromatography tandem mass spectrometric method was developed to simultaneously analyze ethyl glucuronide (EtG), a metabolite of ethanol; COC; cocaethylene (CE), an alcohol-derived metabolite of COC; and benzoylecgonine (BZE), a major metabolite of COC, to determine the concurrent use of alcohol with COC. For pre-treatment, ultracentrifugation (5 min, 50,000 g) and mixed-mode anion exchange solid-phase extraction were used to increase the recovery of target compounds and minimize the matrix effect of hair. The lower limits of quantification were: 7 pg/mg (EtG), 2 pg/mg (COC), 10 pg/mg (CE), and 1 pg/mg (BZE). The correlation coefficient (r) of the calibration curve within the quantified range of target compounds was ≥ 0.9978. The intra- and inter-day accuracies were − 6.1–9.7% and − 9.3–8.3%, and intra- and inter-day precisions were 0.5–10.3% and 0.6–14.4%, respectively. The recovery, matrix effect, process efficiency, and autosampler stability were 89.2–104.8%, 81.6–105.4%, 81.5–107.1%, and 96.6–109.7%, respectively. The novel analytical method was validated with hair samples from individuals suspected of alcohol and COC use, and the method could distinguish between independent and concurrent use. Based on the findings, the analytical approach developed in this study is anticipated to be valuable in drug and alcohol dependence tests that require the simultaneous detection of alcohol and COC abuse.

Application of platform process development approaches to the manufacturing of Mabcalin™ bispecifics.

Bispecific biotherapeutics offer potent and highly specific treatment options in oncology and immuno-oncology. However, many bispecific formats are prone to high levels of aggregation and instability, leading to prolonged development timelines, inefficient manufacturing, and high costs. The novel class of Mabcalin™ molecules consist of Anticalin® proteins fused to an IgG and are currently being evaluated in pre-clinical and clinical studies. Here, we describe a robust high-yield manufacturing platform for these therapeutic fusion proteins providing data up to commercially relevant scales. A platform upstream process was established for one of the Mabcalin bispecifics and then applied to other clinically relevant drug candidates with different IgG target specificities. Process performance was compared in 3L bioreactors and production was scaled-up to up to 1000L for confirmation. The Mabcalin proteins' structural and biophysical similarities enabled a downstream platform approach consisting of initial protein A capture, viral inactivation, mixed-mode anion exchange polishing, second polishing by cation exchange or hydrophobic interaction chromatography, viral filtration, buffer exchange and concentration by ultrafiltration/diafiltration. All three processes met their target specifications and achieved comparable clearance of impurities and product yields across scales. The described platform approach provides a fast and economic path to process confirmation and is well comparable to classical monoclonal antibody approaches in terms of costs and time to clinic.

Simultaneous determination of enantiomer residues of metalaxyl and its metabolite metalaxyl acid in animal muscle tissues by chiral liquid chromatography-tandem mass spectrometry

The toxicity of the two enantiomers of metalaxyl is significantly different and, for food safety concerns, stereoselective analysis of its residues is extremely important in animal muscle tissues. Herein, a simple, sensitive and reproducible method for the simultaneous stereoselective analysis of metalaxyl and its metabolite metalaxyl acid in animal-derived foods has been established based on mixed-mode anion exchange solid phase extraction and chiral liquid chromatography-tandem mass spectrometry. Under the optimized separation and sample pretreatment conditions, good linearity (r > 0.99) was obtained for four target analytes in four animal muscle tissues including bovine, chicken, swine and fish. Mean recoveries of all enantiomers in muscle tissue samples were 89.5–110.3 % with relative standard deviations below 12.4 %. The limits of quantification of the analytes were 0.3–1.0 µg/kg. The proposed method provides an effective means to monitor the enantiomer residues in real samples whether using highly active R-metalaxyl or racemic mixture drugs.

Purification processes of live virus vaccine candidates expressed in adherent Vero cell lines via multimodal chromatography in flowthrough mode.

Live virus vaccine (LVV) purification, employing chromatography, can be challenged by low binding capacities and elution yields. Alternatively, processes relying solely on enzymatic digestion steps and size-based membrane separations can be limited by suboptimal reduction of process related impurities and poorly scalable unit operations. Here, we demonstrate that the combination of flowthrough mode chromatography and an ultrafiltration/diafiltration (UF/DF) unit operation delivers a purification process for two different LVV candidates, V590 and Measles, expressed in adherent Vero cells. For V590, chromatography with mixed mode cation exchange resins returned final product yields of ∼50% and logarithmic reduction values (LRVs) of 1.7->3.4 and 2.5-3.0 for host cell DNA (hcDNA) and host cell proteins (HCPs), respectively. For Measles, chromatography with mixed mode anion exchange resins returned final product yields of ∼50% and LRVs of 1.6 and 2.2 for hcDNA and HCPs, respectively. For both V590 and Measles processing, the employed resins cleared a key HCP, fibronectin, which could foul the UF/DF unit operation, and thusly enabling it to further reduce HCPs and to formulate the final LVV products. This integrated purification process utilizes the complementary action of the two unit operations and its applicability across LVVs supports its consideration for their processing.

The effect of kosmotropic salts on aggregate removal from monoclonal antibodies in mixed-mode anion exchange chromatography

Efficacious and safe application of recombinant proteins in humans as drugs depends on their high purity accomplished by downstream processing. The present study evaluates the effects of kosmotropic salts used in the flow-through mode of mixed-mode anion exchange (MMAEX) chromatography to remove high molecular weight (HMW) impurities efficiently from monoclonal antibody (mAb) products. For this purpose, the impact of different kosmotropic salts at varying concentrations along with changes of the pH were systematically assessed by high throughput screens on a set of mAbs differing in their relative hydrophobicity. In contrast to the more hydrophobic mAbs, for the more hydrophilic mAbs, a clear and consistent removal of HMW species to values > 80% (achieving up to 2.5-fold improvement) occurred with the addition of increasing amounts of a kosmotropic salt (sodium chloride, sodium sulfate, ammonium sulfate, potassium chloride and potassium sulfate) to the loads applied to MMAEX chromatography. Overall, the herein described effect on the removal of HMW species by MMAEX resins was specific for kosmotropic salts, independent of conductivity, and facilitated by slightly basic pH conditions. These findings were confirmed at lab-scale operation achieving > 99% purity, indicating the potential to implement MMAEX in combination with kosmotropic salts as a polishing step for hydrophilic mAbs.

Determination of three oryzanols in rice by mixed-mode solid-phase extraction coupled with high performance liquid chromatography-tandem mass spectrometry

建立了利用高效液相色谱-串联质谱结合混合型阴离子交换固相萃取柱测定稻米中3种谷维素(环木菠萝烯醇阿魏酸酯(CA-FA)、24-亚甲基环木菠萝烯醇阿魏酸酯(24MCA-FA)和菜油甾醇阿魏酸酯(Camp-FA))含量的分析方法。实验通过优化3种谷维素的多反应监测(MRM)质谱参数,比较了在不同流动相中的分离度以及响应强度,同时考察了不同提取条件、净化条件对3种谷维素提取率和净化效果的影响,再结合外标法定量,实现了对稻米中3种谷维素的定量分析。实验结果表明,采用5 mmol/L乙酸铵水溶液为流动相A,甲醇∶乙腈=1∶1(v/v)为流动相B,梯度洗脱,3种谷维素在Agilent Eclipse XDB-C8色谱柱(150 mm×2.1 mm, 3.5 μm)上基本分离且响应强度和峰形最佳;提取条件经正交实验优化后可得:料液比为1∶20(g/mL)、提取溶剂为甲醇、浸泡时间为12 h、超声温度为40 ℃以及超声时间为20 min时,3种谷维素提取率最高;对混合型阴离子交换固相萃取柱的上样溶剂以及洗脱溶剂优化后,样品基质效应为1.6%~10.8%。在各优化条件下,3种谷维素在各自的线性范围内线性良好,相关系数(r2)均≥0.9983,检出限(LOD)为0.5~1.0 μg/L,定量限(LOQ)为2.0~3.5 μg/L。在稻米样品本底浓度2、5和10倍的加标水平下3种谷维素的平均回收率为86.1%~110.6%,相对标准偏差(RSD)为0.9%~3.2%。该方法可快速准确测定稻米中3种谷维素的含量,为后续稻米中谷维素类化合物测定及鉴定奠定基础。

Unexpected sensitivity enhancement in analysing alfatoxin M1 using LC-IDMS

Aflatoxin M1 (AFM1) and patulin (PAT) are regulated mycotoxins, which are generally analyzed in food samples alone (“one analyte at a time”). This paper presents the development of a liquid chromatography isotope dilution tandem mass spectrometric (LC-IDMS) method for the determination of AFM1 in milk-based products, which method was then successfully applied to PAT in apple-based food samples. The method involved a selective solid-phase extraction clean-up at acidic pH employing mixed-mode cation exchange cartridges. The purification allowed the adequate adsorption of neutral target compounds and basic matrix constituents of the sample to the reversed-phase (RP) and to the cation exchange phase of the cartridge, respectively. The sample elution with pure methanol yielded an extract free from basic matrices. The remaining acidic and neutral matrix constituents of the samples were separated from the analytes using mixed-mode anion exchange HPLC column. Mobile phases without any modifiers were used for the highest sensitivity and better selectivity. The intensity enhancement obtained by neutral eluent composition was inter-laboratory tested and confirmed on same type of instruments. The sample preparation requires low amount of organic solvent, thus adhered to green analytical chemistry. The developed method for analyzing AFM1 resulted in low matrix effect of LC-IDMS separation −4.9-(−1.5%) and high precision (2.7–5.9%), calculated under method validations at spiking levels between 0.005 and 0.050 µg/kg. Method performance characteristics for analyzing PAT were also evaluated at 10 and 25 µg/kg levels. Finally, the advantageous features of the newly developed method were briefly compared and discussed with the existing approaches.

High sensitivity acidic N-glycan profiling with MS-enhancing derivatization and mixed mode chromatography

Acidic N-linked glycan content is often associated with a protein drug’s stability, efficacy and immune response. It has often been a challenge to analyze these types of glycans, including those that are differentiated by the incorporation of N-acetyl (NANA) and N-glycolyl neuraminic acid (NGNA) residues. In this study, a strategy for rapid N-glycan profiling by mixed mode chromatography is proposed as a complement to established HILIC methodologies. Hybrid silica chromatographic surfaces are used to improve recoveries during a column’s initial use and to eliminate the need for column conditioning. In addition, the loss of labeled acidic glycans, especially phosphorylated glycan species, during SPE purification is addressed through the use of a citrate containing eluent. Yields for both singly and doubly phosphorylated glycan species are markedly improved. Combined with a mixed mode anion exchange reversed phase separation, these advances afford a class separation of glycans derivatized with labels designed to enhance positive ion mode MS detection. These labeled glycan species are separated according to their charge and with an added level of resolution imparted by the reversed phase retention mechanism. The separation technique itself can be accomplished with a low ionic strength gradient running from 0 to 22 mM ammonium formate such that high sensitivity detection can be achieved by both fluorescence and mass spectrometry. Using analytical scale chromatography, features in an N-glycan profile were easily interrogated to well below a 0.1% relative abundance. As such, it became possible to characterize N-glycans from recombinant beta glucuronidase and to quickly identify a number of unique phosphorylated glycan species.

Antibody-Free Quantification of Serum Chromogranin A by Targeted Mass Spectrometry.

Chromogranin A (CgA) is a 48 kDa protein that serves as a diagnostically sensitive, but nonspecific, serum biomarker for neuroendocrine tumors. Immunoassays for CgA are not standardized and have a narrow dynamic range, which requires dilution of concentrated specimens. We developed and validated an antibody-free, liquid chromatography-tandem mass spectrometry (LC-MS/MS)-based method for CgA without these limitations. CgA was extracted from serum using a mixed-mode anion exchange solid-phase extraction plate, digested with trypsin, and analyzed by LC-MS/MS using well-characterized CgA calibration standards. After validation, the mass spectrometry method was compared with the CISBIO immunoassay using 200 serum specimens previously submitted for CgA analysis. Specimens with discordant results were reanalyzed by high-resolution mass spectrometry- (HRMS) -based methods to assess the contribution of truncated and post-translationally modified forms of CgA. The assay had a linear range of 50 to 50 000 ng/mL, recoveries between 89% and 115%, and intra- and interassay imprecision <10%. LC-MS/MS assay results showed a Pearson's correlation of r = 0.953 with the CISBIO immunoassay, with CgA values being a mean 2- to 4-fold higher. Concordance for CgA between the 2 assays was 80.9% (95% CI 72.8%-89.2%), showing substantial agreement. Truncation and posttranslational modification, including 2 phosphorylation sites that had not been previously observed or predicted to our knowledge, did not appear to contribute directly to discordance between the 2 assays. Quantification of CgA by LC-MS/MS provides an analytically sensitive and reproducible alternative to commercially available immunoassays.

Sensory Relevance of Strecker Aldehydes in Wines. Preliminary Studies of Its Removal with Different Type of Resins.

The orthonasal quality of two synthetic contexts of wine (young wine and oaked wine) spiked with six different levels of the Strecker aldehydes (isobutyraldehyde, 2-methylbutanal, 3-methylbutanal, methional and phenylacetaldehyde) was evaluated by a panel of wine experts. The aldehyde levels simulated the concentrations present in wines protected from oxidation during production and storage and after severe oxidation. Significant quality detriments were observed at concentrations of 13 µg/L of methional, 49 µg/L of phenylacetaldehyde, 17 µg/L of isobutyraldehyde, 12 µg/L of 2-methylbutanal and 24 µg/L of 3-methylbutanal. The presence of these levels of aldehyde concentrations induced the reduction of fruitiness in young wines and of woody notes in oaked wines as well as the appearance of the typical attributes that define wine oxidation. More than 75% of recently opened commercial wines contain total levels of Strecker aldehydes higher than those, however their effect is not always noticeable as they are forming inodorous adducts with SO2. Nevertheless, this content is a potential risk for the shelf life of the wine, as once SO2 is depleted, these aldehydes could release back into their odour-active forms. Thus, in order to reduce the presence of Strecker aldehydes, eight different resins were studied (two scavengers, four mixed-mode anion exchange and two pure anion exchange) in white wine at two levels of SO2. After 24-h contact, the mixed mode Strata X-A resin was able to significantly reduce aldehydes’ percentages: between 11% for isobutyraldehyde and 86% for phenylacetaldehyde. On the other hand, wine colour was affected and therefore the applicability of the treatment should be further studied. However, this work can be considered a starting point to solve the technological challenge involved in the elimination of aldehydes from wine.

A novel SPE-UHPLC-DAD method for the determination of fumagillin produced by Aspergillus fumigatus in cell culture media

Fumagillin is a biomolecule produced by Aspergillus fumigatus that is gaining relevance due to its connection with invasive aspergillosis. The determination of this molecule might help to understand the propagation of this disease and study its use as a potential biomarker. In spite of the interest of fumagillin in microbiological research, no quantitative method has been developed so far for its determination in cell culture media. In this work, the first validated method for the quantitative analysis of fumagillin in RPMI-1640 is presented. The sample treatment consists of a mixed-mode anion exchange Solid Phase Extraction that effectively removes potential interferences and offered a recovery of 83 ± 7%. The analysis was carried out by Ultra High Performance Liquid Chromatography coupled to Diode Array Detection at 336 nm. The method fulfilled the validation criteria established by EMA and FDA guidelines for bioanalysis (selectivity, carry over, linearity, accuracy, precision, dilution integrity and stability) and offers a limit of quantitation (25 μg·L−1) suitable for its intended use. Indeed, the method was satisfactorily applied to the quantification of the fumagillin produced by three strains of Aspergillus fumigatus with different toxin production capacity.

Fabric Phase Sorptive Extraction: A Paradigm Shift Approach in Analytical and Bioanalytical Sample Preparation.

Fabric phase sorptive extraction (FPSE) is an evolutionary sample preparation approach which was introduced in 2014, meeting all green analytical chemistry (GAC) requirements by implementing a natural or synthetic permeable and flexible fabric substrate to host a chemically coated sol–gel organic–inorganic hybrid sorbent in the form of an ultra-thin coating. This construction results in a versatile, fast, and sensitive micro-extraction device. The user-friendly FPSE membrane allows direct extraction of analytes with no sample modification, thus eliminating/minimizing the sample pre-treatment steps, which are not only time consuming, but are also considered the primary source of major analyte loss. Sol–gel sorbent-coated FPSE membranes possess high chemical, solvent, and thermal stability due to the strong covalent bonding between the fabric substrate and the sol–gel sorbent coating. Subsequent to the extraction on FPSE membrane, a wide range of organic solvents can be used in a small volume to exhaustively back-extract the analytes after FPSE process, leading to a high preconcentration factor. In most cases, no solvent evaporation and sample reconstitution are necessary. In addition to the extensive simplification of the sample preparation workflow, FPSE has also innovatively combined the extraction principle of two major, yet competing sample preparation techniques: solid phase extraction (SPE) with its characteristic exhaustive extraction, and solid phase microextraction (SPME) with its characteristic equilibrium driven extraction mechanism. Furthermore, FPSE has offered the most comprehensive cache of sorbent chemistry by successfully combining almost all of the sorbents traditionally used exclusively in either SPE or in SPME. FPSE is the first sample preparation technique to exploit the substrate surface chemistry that complements the overall selectivity and the extraction efficiency of the device. As such, FPSE indeed represents a paradigm shift approach in analytical/bioanalytical sample preparation. Furthermore, an FPSE membrane can be used as an SPME fiber or as an SPE disk for sample preparation, owing to its special geometric advantage. So far, FPSE has overwhelmingly attracted the interest of the separation scientist community, and many analytical scientists have been developing new methodologies by implementing this cutting-edge technique for the extraction and determination of many analytes at their trace and ultra-trace level concentrations in environmental samples as well as in food, pharmaceutical, and biological samples. FPSE offers a total sample preparation solution by providing neutral, cation exchanger, anion exchanger, mixed mode cation exchanger, mixed mode anion exchanger, zwitterionic, and mixed mode zwitterionic sorbents to deal with any analyte regardless of its polarity, ionic state, or the sample matrix where it resides. Herein we present the theoretical background, synthesis, mechanisms of extraction and desorption, the types of sorbents, and the main applications of FPSE so far according to different sample categories, and to briefly show the progress, advantages, and the main principles of the proposed technique.

Development and validation of a fast and reliable method for the quantification of glucagon by liquid chromatography and tandem mass spectrometry

IntroductionThe quantitation of glucagon remains a challenging immunoassay, mainly due to cross-reactivity. A sensitive, rapid and specific intact glucagon method is therefore necessary for quality routine analysis. A tandem mass spectrometry method to fulfill this objective is described in this work. MethodsGlucagon was extracted from plasma employing a mixed-mode anion exchange solid-phase extraction. Sample stability was assessed in K2-EDTA and P800 tubes at different temperatures. We compared our method to two different immunoassays. FDA and EMA guidelines were followed for validation. An external quality control program served for comparison with other laboratories. ResultsAssay imprecision was below 4%. Recoveries were within 95–103%. LoQ was 8.75 pg/mL. Total analytical CV was 2.91%. Samples were found stable at 4 °C for less than 4 h. Diasource® RIA disagreed with our method. Mercodia® ELISA provided a closer agreement, also proven by external quality control samples. ConclusionsA rapid and specific LC-MS/MS method for glucagon quantitation has been developed, validated and is suitable to routine care. The simplicity and the good performances in terms of time and specificity, could open the possibility to establish a standardized method for glucagon.

High-Throughput Fractionation Coupled to Mass Spectrometry for Improved Quantitation in Metabolomics.

Metabolomics is emerging as an important field in life sciences. However, a weakness of current mass spectrometry (MS) based metabolomics platforms is the time-consuming analysis and the occurrence of severe matrix effects in complex mixtures. To overcome this problem, we have developed an automated and fast fractionation module coupled online to MS. The fractionation is realized by the implementation of three consecutive high performance solid-phase extraction columns consisting of a reversed phase, mixed-mode anion exchange, and mixed-mode cation exchange sorbent chemistry. The different chemistries resulted in an efficient interaction with a wide range of metabolites based on polarity, charge, and allocation of important matrix interferences like salts and phospholipids. The use of short columns and direct solvent switches allowed for fast screening (3 min per polarity). In total, 50 commonly reported diagnostic or explorative biomarkers were validated with a limit of quantification that was comparable with conventional LC–MS(/MS). In comparison with a flow injection analysis without fractionation, ion suppression decreased from 89% to 25%, and the sensitivity was 21 times higher. The validated method was used to investigate the effects of circadian rhythm and food intake on several metabolite classes. The significant diurnal changes that were observed stress the importance of standardized sampling times and fasting states when metabolite biomarkers are used. Our method demonstrates a fast approach for global profiling of the metabolome. This brings metabolomics one step closer to implementation into the clinic.

Measurement of bempedoic acid and its keto metabolite in human plasma and urine using solid phase extraction and electrospray LC-MS/MS

Bempedoic acid, a new therapeutic for treatment of hypercholesterolemia, inhibits hepatic ATP-citrate lyase in the cholesterol synthesis pathway after its conjugation with coenzyme A. Sensitive and selective methods were required to study the pharmacokinetic behavior of bempedoic acid and its active 8-keto metabolite in clinical studies. A mixed mode anion exchange extraction on 96-well plates was developed to favor high, selective recoveries of these dicarboxylic acids from urine or plasma. Adsorptive losses in urine led to inaccurate measurements unless samples were acidified and diluted with isopropanol prior to any specimen transfers. Tandem mass spectrometry with negative ion electrospray ionization permitted lower limits of measurement of 20 and 10 ng/mL for the drug and metabolite in either matrix. The methods were validated to current regulatory standards and have been the basis for pharmacokinetic measurements in 26 clinical studies involving over 15,000 samples.

Aqueous extraction followed by dispersive solid phase extraction with in situ derivatization for the determination of aflatoxins in traditional Chinese medicines

A green sample preparation method based on aqueous extraction followed by dispersive solid phase extraction (d-SPE) with in situ derivatization (ISD) was developed for the determination of aflatoxins (AFs) in traditional Chinese medicines (TCMs). AFs in TCMs were extracted by alkaline aqueous solution and converted to substituted coumaric acids. Then, mixed-mode anion exchange (MAX) sorbent was used to isolate and enrich the substituted coumaric acids. During the elution by acetonitrile/trifluoroacetic acid solution, AFs were reconstructed and in situ derivatized. Several parameters affecting the procedure were evaluated. The developed preparation method coupled with high performance liquid chromatography-fluorescence detection was successfully applied for AFs determination in TCMs. The limit of detection (LOD) reached 10 pg/mL for AFs. Good linearity was obtained in three orders of magnitude with correlation coefficients ranging from 0.9996 to 0.9999. The relative recoveries of the method were between 72.7% and 114.5% with intra- and inter-day relative standard deviations (RSDs) less than 9.5% and 10.1%, respectively. The method was successfully applied to determine AFs in 15 kinds of TCMs in China, with the results verified by IAC standard method.

A tiered analytical approach for target, non-target and suspect screening analysis of polar transformation products of polycyclic aromatic compounds

Polycyclic aromatic compounds (PACs) possess toxicity towards humans, and their presence in the environment is unwanted. Polar transformation products (TPs) are more mobile, and can be considered emerging contaminants, as they represent a more bioavailable carrier of the same toxic properties. Acidic TPs has been proposed as an important class of polar TPs. This study presents a tiered analytical approach to investigate acidic and polar PAC TPs in environmental conditions. The tiered approach exploits target analysis for quantification of acids; suspect screening for tentative identification based on retention time and spectral matching using databases; and finally non-target analysis based on chromatography and data independent broadband MS to highlight potentially unknown analyte peaks. The approach includes a mixed-mode anion exchange solid phase extraction (MAX-SPE) to fractionate neutral and acidic compounds, and is applied to three cases: I) Photo-oxidation of six PACs generated suspected hydroxylated-, carbonylated- and carboxylated PACs but also proposed the presence of mono- and dicarboxylic acids, which have not been reported elsewhere. For a subset of four acids, conversion rates were determined. II) Recovery of spiked acids from diesel spilled harbor water was 80% by LC-MS, and diesel spill weathering was evaluated from the neutral fraction by GC-MS. III) By non-target analysis sulfonated PACs, presumable derived from photo-oxidation, were detected in run-off basins of an arctic landfarm, alongside hypothesized naturally occuring fatty acids. The tiered approach is a sensitive and versatile tool to extract information on PACs and their polar TPs from polluted environmental sites.

Impact of method parameters on the performance of suspect screening for the identification of trace organic contaminants in surface waters

The performance of a suspect screening method to detect diverse small-molecule trace organic contaminants (TOCs) was systematically evaluated using a set of 39 model compounds. Experiments showed that ionization efficiency, ion transfer parameters, and chromatography could affect the detection of TOCs. As expected, compounds with low ionization yields and poorly retained compounds in chromatographic columns are more difficult to identify in the samples at environmental concentrations. Similarly, TOCs with large deviations from the average mass of the compounds screened were not transmitted efficiently in the mass spectrometer thus negatively affecting their detection. The suspect screening method was validated in terms of recovery and limits of identification of the model compounds using three different types of solid-phase extraction cartridges (reversed phase with polar groups, mixed-mode anion exchange, and mixed mode cation exchange). Experiments showed that more than two-thirds of the model compounds had recoveries &gt;75% with each of the three cartridges, and comparison of limits of identification showed that more than one-half of the model compounds could be identified at concentrations between 6 and 100 ng L−1. However, it was observed that the amount of co-extracted compounds was higher in mixed-mode ion exchangers compared with the reversed-phase cartridge. Application of the suspect screening method using the three different cartridges to surface water samples showed that between 0 to 3% of the positive matches found by the peak identification algorithm were classified as probable structures. Solutions to improve suspect screening of TOCs are proposed and discussed.

A new, sensitive and versatile assay for quantitative determination of α-fluoro-β-alanine (AFBA) in human urine by using the reversed-phase ultrahigh performance-tandem mass spectrometry (rp-UHPLC–MS/MS) system

A method for the quantitation of α-fluoro-β-alanine (AFBA), the main metabolite of capecitabine (Cape) and 5-fluoruracil (5-FU), is described. Among antineoplastic drugs (ADs), 5-FU and Cape (the new oral prodrug) are the most commonly applied drugs in cancer therapy.The main objective of this study was to develop a reliable method that would be easy to run on a reversed-phase UHPLC system coupled to tandem mass spectrometry. AFBA was derivatized with Sanger's reagent to ensure complete yield of a stable 2,4 dinitrophenil-α-fluoro-β-alanine derivative. This method was based on the use of a mixed-mode anion exchange solid phase extraction enabling urinary extracts to be clear of endogenous interferences affecting quantitative results. The assay was validated in human urine according to FDA criteria with the use of a labeled internal standard (β-alanine-d4) to minimize experimental error.Good accuracy and precision were demonstrated by determining spiked urine QC samples in four consecutive days. The recovery of AFBA was between 70.0 and 82.6%, with a matrix effect that was 12.8%–18.5%. The lower limit of quantitation (LOQ) was 0.5 ng/mL with a coefficient of variation of 5.3%.This assay was successfully applied to determine the levels of this metabolite in a large number of urine samples taken from personnel who were occupationally exposed to ADs.