Miniature Inverted-repeat Transposable Elements Families Research Articles

Discovery and genome-wide characterization of a novel miniature inverted repeat transposable element reveal genome-specific distribution in Glycine.

Miniature inverted repeat transposable elements (MITEs) are a dynamic component responsible for genome evolution. Tourist MITEs are derived from and mobilized by elements from the harbinger superfamily. In this study, a novel family of Tourist-like MITE was characterized in wild soybean species Glycine falcata. The new GftoMITE1 was initially discovered as an insertional polymorphism of the centromere-specific histone H3 (CenH3) gene in G. falcata. Using polymerase chain reaction, cloning and sequencing approaches, we showed a high number of copies of the GftoMITE1 family. Extensive bioinformatic analyses revealed the genome-level distribution and locus-specific mapping of GftoMITE1 members in Glycine species. Our results provide the first extensive characterization of the GftoMITE1 family and contribute to the understanding of the evolution of MITEs in the Glycine genus. Genome-specific GftoMITE1 was prominent in perennial wild soybean species, but not in annual cultivated soybean (Glycine max) or its progenitor (Glycine soja). We discuss that the GftoMITE1 family reveals a single rapid amplification in G. falcata and could have potential implications for gene regulation and soybean breeding as an efficient genetic marker for germplasm utilization in the future.

The impact of differential transposition activities of autonomous and nonautonomous hAT transposable elements on genome architecture and gene expression in Caenorhabditis inopinata.

Transposable elements are DNA sequences capable of moving within genomes and significantly influence genomic evolution. The nematode Caenorhabditis inopinata exhibits a much higher transposable element copy number than its sister species, Caenorhabditis elegans. In this study, we identified a novel autonomous transposable element belonging to the hAT superfamily from a spontaneous transposable element-insertion mutant in C. inopinata and named this transposon Ci-hAT1. Further bioinformatic analyses uncovered 3 additional autonomous hAT elements-Ci-hAT2, Ci-hAT3, and Ci-hAT4-along with over 1,000 copies of 2 nonautonomous miniature inverted-repeat transposable elements, mCi-hAT1 and mCi-hAT4, likely derived from Ci-hAT1 and Ci-hAT4 through internal deletion. We tracked at least 3 sequential transpositions of Ci-hAT1 over several years. However, the transposition rates of the other 3 autonomous hAT elements were lower, suggesting varying activity levels. Notably, the distribution patterns of the 2 miniature inverted-repeat transposable element families differed significantly: mCi-hAT1 was primarily located in the chromosome arms, a pattern observed in the transposable elements of other Caenorhabditis species, whereas mCi-hAT4 was more evenly distributed across chromosomes. Additionally, interspecific transcriptome analysis indicated that C. inopinata genes with upstream or intronic these miniature inverted-repeat transposable element insertions tend to be more highly expressed than their orthologous genes in C. elegans. These findings highlight the significant role of de-silenced transposable elements in driving the evolution of genomes and transcriptomes, leading to species-specific genetic diversity.

Characterization of miniature inverted repeat transposable elements inserted in the CitRWP gene controlling nucellar embryony and development of molecular markers for reliable genotyping of CitRWP in Citrus species

Nucellar embryony, a form of apomixis, is one of the most important traits in citrus breeding. Transposition of a miniature inverted repeat transposable element (MITE) in the promoter of CitRWP gene has been previously reported as the causal mutation. However, features of the MITE such as sequences of terminal inverted repeats (TIRs) and target site duplications (TSDs) remain unclear. An MITE family, DTM10, showing the highest homology was identified from 110 citrus MITE families. At least 80 DTM10 elements were identified from each of 10 genome sequences of Citrinae species. Analysis of 114 sweet orange elements showed that DTM10 contained 56-bp TIRs and mostly 9-bp TSDs. Phylogenetic analyses of DTM10 elements identified from five Citrinae species showed that MITEs in CitRWP might have transposed in a common ancestor of Citrus species. Two inverted MITEs were identified from three mutant alleles analyzed. In addition, three tandem MITEs were identified in the mutant allele of Fortunella CitRWP. A strong DNA secondary structure formed between MITEs was predicted. Due to a strong stem-loop structure, a phenomenon of polymerase jumping was observed during PCR amplification. To develop reliable molecular markers, sequences of mutant and wild-type CitRWP alleles were obtained from diverse citrus accessions. Phylogenetic analysis of CitRWP alleles showed that mutant alleles might have originated from a common ancestor of Citrus species. Based on MITE insertion and a single nucleotide polymorphism in the genic region, three complementary molecular markers were developed. Genotyping results of 241 citrus accessions were found to be identical among three molecular markers.

Identification and characterization of transposable element AhMITE1 in the genomes of cultivated and two wild peanuts

BackgroundThe cultivated peanut (Arachis hypogaea L., AABB) is an allotetraploid hybrid between two diploid peanuts, A. duranensis (AA genome) and A. ipaensis (BB genome). Miniature inverted-repeat transposable elements (MITEs), some of which are known as active nonautonomous DNA transposons with high copy numbers, play important roles in genome evolution and diversification. AhMITE1, a member of the MITE family of transposons, but information on the peanut genomes is still limited. Here, we analyzed AhMITE1, AuMITE1 and ApMITE1 in the cultivated (A. hypogaea) and two wild peanut (A. duranensis and A. ipaensis) genomes.ResultsThe cultivated and the two wild peanut genomes harbored 142, 14 and 21 AhMITE1, AuMITE1 and ApMITE1 family members, respectively. These three family members exhibited highly conserved TIR sequences, and insertions preferentially occurred within 2 kb upstream and downstream of gene-coding and AT-rich regions. Phylogenetic and pairwise nucleotide diversity analysis showed that AhMITE1 and ApMITE1 family members have undergone one round of amplification bursts during the evolution of the peanut genome. PCR analyses were performed in 23 peanut varieties and demonstrated that AhMITE1 is an active transposon and that hybridization or chemical mutagenesis can promote the mobilization of AhMITE1.ConclusionsAhMITE1, AuMITE1 and ApMITE1 family members were identified based on local BLAST search with MAK between the cultivated and the two wild peanut genomes. The phylogenetic, nucleotide diversity and variation copy numbers of AhMITE1, AuMITE1 and ApMITE1 members provides opportunities for investigating their roles during peanut evolution. These findings will contribute to knowledge on diversity of AhMITE1, provide information about the potential impact on the gene expression and promote the development of DNA markers in peanut.

Identification and Characterization of PTE-2, a Stowaway-like MITE Activated in Transgenic Chinese Cabbage Lines.

Transposable elements (TEs) are DNA fragments that can be replicated or transposed within a genome. TEs make up a high proportion of the plant genome and contribute to genetic diversity and evolution, affecting genome structure or gene activity. Miniature inverted-repeat transposable elements (MITEs) are short, non-autonomous class II DNA transposable elements. MITEs have specific sequences, target site duplications (TSDs), and terminal inverted repeats(TIRs), which are characteristics of the classification of MITE families. In this study, a Stowaway-like MITE, PTE-2, was activated in transgenic Chinese cabbage lines. PTE-2 was revealed by in silico analysis as the putative activated element in transgenic Chinese cabbage lines. To verify the in silico analysis data, MITE insertion polymorphism (MIP) PCR was conducted and PTE-2 was confirmed to be activated in transgenic Chinese cabbage lines. The activation tendency of the copy elements of PTE-2 at different loci was also analyzed and only one more element was activated in the transgenic Chinese cabbage lines. Analyzing the sequence of MIP PCR products, the TSD sequence and TIR motif of PTE-2 were identified and matched to the characteristics of the Stowaway-like MITE family. In addition, the flanking region of PTE-2 was modified when PTE-2 was activated.

Distribution of MITE family Monkey King in rapeseed (Brassica napus L) and its influence on gene expression

Miniature inverted-repeat transposable elements (MITEs) are a group of class II transposable elements. The MITE Monkey King (MK) was first discovered upstream of BnFLC.A10. In this study, genome resequencing of four selected B. napus accessions, revealed more than 4000 distributed copies of MKs constituting ~2.4 Mb of the B. napus genomic sequence and caused 677 polymorphisms among the four accessions. MK -polymorphism-related markers across 128 natural and 58 synthetic accessions revealed more polymorphic MKs in natural than synthetic accessions. Ten MK -induced indels significantly affected the expression levels of the nearest gene based on RNAseq analysis, six of these effects were subsequently confirmed using qRT-PCR. Decreased expression pattern of MK -derived miRNA-bna-miR6031 was also observed under various stress treatments. Further research focused on the MITE families should promote not only our understanding of gene regulatory networks but also inform crop improvement efforts.

A Global Landscape of Miniature Inverted-Repeat Transposable Elements in the Carrot Genome.

Miniature inverted-repeat transposable elements (MITEs) are the most abundant group of Class II mobile elements in plant genomes. Their presence in genic regions may alter gene structure and expression, providing a new source of functional diversity. Owing to their small size and lack of coding capacity, the identification of MITEs has been demanding. However, the increasing availability of reference genomes and bioinformatic tools provides better means for the genome-wide identification and analysis of MITEs and for the elucidation of their contribution to the evolution of plant genomes. We mined MITEs in the carrot reference genome DH1 using MITE-hunter and developed a curated carrot MITE repository comprising 428 families. Of the 31,025 MITE copies spanning 10.34 Mbp of the carrot genome, 54% were positioned in genic regions. Stowaways and Tourists were frequently present in the vicinity of genes, while Mutator-like MITEs were relatively more enriched in introns. hAT-like MITEs were relatively more frequently associated with transcribed regions, including untranslated regions (UTRs). Some carrot MITE families were shared with other Apiaceae species. We showed that hAT-like MITEs were involved in the formation of new splice variants of insertion-harboring genes. Thus, carrot MITEs contributed to the accretion of new diversity by altering transcripts and possibly affecting the regulation of many genes.

Diversity and association analysis of important agricultural trait based on miniature inverted-repeat transposable element specific marker in Brassica napus L.

Abatract Miniature inverted-repeat transposable elements (MITEs) are a group of DNA transposable element (TE) which preferentially distributed with gene associated regions. Tens of MITEs families have been revealed in Brassica napus genome, they scatter across the genome with tens of thousands copies and produce polymorphisms both intra- and inter-species. Our previous studies revealed a Tourist-like MITE, Monkey King, associated with vernalization requirement of B. napus, however there are still few studies reveal MITE association with agricultural traits in B. napus. In the present study, 80 polymorphic markers were developed from 55 MITEs, and used to evaluate genetic diversity in a panel of B. napus accessions consisting of 101 natural and 25 synthetic genotypes. Five agricultural traits, oil content, glucosinolate content, erucic acid content, weight of thousand seeds (WTS) and plant height, were investigated across 3-years field experiments, in addition, two traits, hypocotyl length and root length, were evaluated at the 4-leaf stage in the laboratory. Correlations between the MITE-based markers and seven traits were analyzed, finally, 10 polymorphic markers produced by 6 pairs of MITE specific primers were revealed relatively high correlation with 5 traits. Two polymorphic markers were anchored with two candidate genes, BnaA02g13530D and BnaA08g20010D, respectively, which may contribute to glucosinolate content and WTS. This research may contribute to genetic improvement through utilization of MITE-induced polymorphisms in Brassica species.

Characterization of B-Genome Specific High Copy hAT MITE Families in Brassica nigra Genome.

Miniature inverted-repeat transposable elements (MITEs) are non-autonomous class II transposons which have been shown to influence genome evolution. Brassica nigra L. (B-genome) is one of three Brassica diploids cultivated primarily as an oil crop, which harbors novel alleles important for breeding. Two new high copy hAT MITE families (BniHAT-1 and BniHAT-2) from the B-genome were characterized and their prevalence assessed in the genomes of the related diploids, rapa L. (A) and Brassica oleracea L. (C). Both novel MITE families were present at high copy numbers in the B-genome with 434 and 331 copies of BniHAT-1 and BniHAT-2, respectively. Yet less than 20 elements were identified in the genome assemblies of the A, and C -genomes, supporting B-genome specific proliferation of these MITE families. Although apparently randomly distributed across the genome, 68 and 70% of the B-genome MITEs were present within 2 kb flanking regions of annotated genes suggesting they might influence gene expression and/or function. In addition, MITE derived microRNAs and transcription factor binding sites suggested a putative role in gene regulation. Age of insertion analysis revealed that the major proliferation of these elements occurred during 2–3 million years ago. Additionally, site-specific polymorphism analyses showed that 44% MITEs were undergoing active amplification into the B-genome. Overall, this study provides a comprehensive analysis of two high copy MITE families, which were specifically amplified in the B-genome, suggesting a potential role in shaping the Brassica B-genome.

Very Deep Neural Networks for Extracting MITE Families Features and Classifying them based on DNA Scalograms

DNA sequencing has recently generated a very large volume of data in digital format. These data can be compressed, processed and classified only by using automatic tools which have been employed in biological experiments. In this work, we are interested in the classification of particular regions in C. Elegans Genome, a recently described group of transposable elements (TE) called Miniature Inverted-repeat Transposable Elements (MITEs). We particularly focus on the four MITE families (Cele1, Cele2, Cele14, and Cele42). These elements have distinct chromosomal distribution patterns and specific number conserved on the six autosomes of C. Elegans. Thus, it is necessary to define specific chromosomal domains and the potential relationship between MITEs and Tc / mariner elements, which makes it difficult to determine the similarities between MITES and TC classes. To solve this problem and more precisely to identify these TEs, these data are classified and compressed, in this study, using an efficient classifier model. The application of this model consists of four steps. First, the DNA sequence are mapped in a scalogram’s form. Second, the characteristic motifs are extracted in order to obtain a genomic signature. Third, MITE database is randomly divided into two data sets: 70% for training and 30%for tests. Finally, these scalograms are classified using Transfer Learning Approach based on pre-trained models like VGGNet. The introduced model is efficient as it achieved the highest accuracy rates thanks to the recognition of the correct characteristic patterns and the overall accuracy rate reached 97.11% for these TEs samples classification. Our approach allowed also classifying and identifying the MITES Classes compared to the TC class despite their strong similarity. By extracting the features and the characteristic patterns, the volume of massive data was considerably reduced.

A miniature inverted-repeat transposable element, AddIn-MITE, located inside a WD40 gene is conserved in Andropogoneae grasses.

Miniature inverted-repeat transposable elements (MITEs) have been associated with genic regions in plant genomes and may play important roles in the regulation of nearby genes via recruitment of small RNAs (sRNA) to the MITEs loci. We identified eight families of MITEs in the sugarcane genome assembly with MITE-Hunter pipeline. These sequences were found to be upstream, downstream or inserted into 67 genic regions in the genome. The position of the most abundant MITE (Stowaway-like) in genic regions, which we call AddIn-MITE, was confirmed in a WD40 gene. The analysis of four monocot species showed conservation of the AddIn-MITE sequence, with a large number of copies in their genomes. We also investigated the conservation of the AddIn-MITE’ position in the WD40 genes from sorghum, maize and, in sugarcane cultivars and wild Saccharum species. In all analyzed plants, AddIn-MITE has located in WD40 intronic region. Furthermore, the role of AddIn-MITE-related sRNA in WD40 genic region was investigated. We found sRNAs preferentially mapped to the AddIn-MITE than to other regions in the WD40 gene in sugarcane. In addition, the analysis of the small RNA distribution patterns in the WD40 gene and the structure of AddIn-MITE, suggests that the MITE region is a proto-miRNA locus in sugarcane. Together, these data provide insights into the AddIn-MITE role in Andropogoneae grasses.

Genome-wide analyses of miniature inverted-repeat transposable elements reveals new insights into the evolution of the Triticum-Aegilops group

The sequence drafts of wild emmer and bread wheat facilitated high resolution, genome-wide analysis of transposable elements (TEs), which account for up to 90% of the wheat genome. Despite extensive studies, the role of TEs in reshaping nascent polyploid genomes remains to be fully understood. In this study, we retrieved miniature inverted-repeat transposable elements (MITEs) from the recently published genome drafts of Triticum aestivum, Triticum turgidum ssp. dicoccoides, Aegilops tauschii and the available genome draft of Triticum urartu. Overall, 239,126 MITE insertions were retrieved, including 3,874 insertions of a newly identified, wheat-unique MITE family that we named “Inbar”. The Stowaway superfamily accounts for ~80% of the retrieved MITE insertions, while Thalos is the most abundant family. MITE insertions are distributed in the seven homologous chromosomes of the wild emmer and bread wheat genomes. The remarkably high level of insertions in the B sub-genome (~59% of total retrieved MITE insertions in the wild emmer genome draft, and ~41% in the bread wheat genome draft), emphasize its highly repetitive nature. Nearly 52% of all MITE insertions were found within or close (less than 100bp) to coding genes, and ~400 MITE sequences were found in the bread wheat transcriptome, indicating that MITEs might have a strong impact on wheat genome expression. In addition, ~40% of MITE insertions were found within TE sequences, and remarkably, ~90% of Inbar insertions were located in retrotransposon sequences. Our data thus shed new light on the role of MITEs in the diversification of allopolyploid wheat species.

Identification of novel MITEs (miniature inverted-repeat transposable elements) in Coxiella burnetii: implications for protein and small RNA evolution

BackgroundCoxiella burnetii is a Gram-negative gammaproteobacterium and zoonotic agent of Q fever. C. burnetii’s genome contains an abundance of pseudogenes and numerous selfish genetic elements. MITEs (miniature inverted-repeat transposable elements) are non-autonomous transposons that occur in all domains of life and are thought to be insertion sequences (ISs) that have lost their transposase function. Like most transposable elements (TEs), MITEs are thought to play an active role in evolution by altering gene function and expression through insertion and deletion activities. However, information regarding bacterial MITEs is limited.ResultsWe describe two MITE families discovered during research on small non-coding RNAs (sRNAs) of C. burnetii. Two sRNAs, Cbsr3 and Cbsr13, were found to originate from a novel MITE family, termed QMITE1. Another sRNA, CbsR16, was found to originate from a separate and novel MITE family, termed QMITE2. Members of each family occur ~ 50 times within the strains evaluated. QMITE1 is a typical MITE of 300-400 bp with short (2-3 nt) direct repeats (DRs) of variable sequence and is often found overlapping annotated open reading frames (ORFs). Additionally, QMITE1 elements possess sigma-70 promoters and are transcriptionally active at several loci, potentially influencing expression of nearby genes. QMITE2 is smaller (150-190 bps), but has longer (7-11 nt) DRs of variable sequences and is mainly found in the 3′ untranslated region of annotated ORFs and intergenic regions. QMITE2 contains a GTAG repetitive extragenic palindrome (REP) that serves as a target for IS1111 TE insertion. Both QMITE1 and QMITE2 display inter-strain linkage and sequence conservation, suggesting that they are adaptive and existed before divergence of C. burnetii strains.ConclusionsWe have discovered two novel MITE families of C. burnetii. Our finding that MITEs serve as a source for sRNAs is novel. QMITE2 has a unique structure and occurs in large or small versions with unique DRs that display linkage and sequence conservation between strains, allowing for tracking of genomic rearrangements. QMITE1 and QMITE2 copies are hypothesized to influence expression of neighboring genes involved in DNA repair and virulence through transcriptional interference and ribonuclease processing.

A moso bamboo (Phyllostachys edulis) miniature inverted-repeat transposable element (MITE): the possible role of a suppressor

Transposable elements (transposons) are fragments of DNA sequences which can move within host genome. Miniature inverted-repeat transposable elements (MITEs) are widespread and high-copy transposable elements in eukaryotic genomes. Tourist-like MITEs are especially abundant in plant kingdom. Earlier genome-wide analysis has shown that MITEs are widely distributed in the moso bamboo genome and preferentially inserted into gene regions. In the present study, in order to examine the potential influence of MITEs on the moso bamboo gene expressions, a highly conserved Tourist-like MITE family, which distributed near genes, was selected as research focus and named PhTst-3 (Phyllostachys edulis Tourist-like element 3). The MITEs’ insertion sites were tested in moso bamboo half-sib seedlings by real-time fluorescence quantitative PCR. Amplification polymorphisms were found in a copy of PhTst-3 (PhTst-3-55) which was located in the intron of PH01002699G0010. This inserted PhTst-3-55 had a significant impact on the gene expression revealed by the real-time fluorescence quantitative PCR. The gene expression levels were four times higher in the absence of PhTst-3-55 than those in the presence of it. This finding suggests that the PhTst-3 located in the intron is involved in the regulation of the gene. In order to examine the impact of PhTst-3-55 on the near genes, the PhTst-3-55 was inserted into a promoter analysis vector, pxk7S2D, between the two promoter sequences. The Agrobacterium-mediated transient expression showed that PhTst-3-55 insertion decreases the expression level of upstream GUS gene and downstream GFP gene. So, PhTst-3-55 can have a silencing role by bidirectionally inhibiting gene expression.

Genome-wide characterization and evolution analysis of miniature inverted-repeat transposable elements (MITEs) in moso bamboo (Phyllostachys heterocycla).

Moso bamboo MITEs were genome-wide identified first time, and data shows that MITEs contribute to the genomic diversity and differentiation of bamboo. Miniature inverted-repeat transposable elements (MITEs) are widespread in animals and plants. There are a large number of transposable elements in moso bamboo (Phyllostachys heterocycla var. pubescens) genome, but the genome-wide information of moso bamboo MITEs is not known yet. Here we identified 362 MITE families with a total of 489,592 MITE-related sequences, accounting for 4.74% of the moso bamboo genome. The 362 MITE families are clustered into six known and one unknown super-families. Our analysis indicated that moso bamboo MITEs preferred to reside in or near the genes that might be involved in regulation of host gene expression. Of the seven super-families, three might undergo major expansion event twice, respectively, during 8-11 million years ago (mya) ago and 22-28mya ago; two might experience a long expansion period from 6 to 13mya. Almost 1/3 small RNAs might be derived from the MITE sequences. Some MITE families generate small RNAs mainly from the terminals, while others predominantly from the central region. Given the high copy number of MITEs, many siRNAs and miRNAs derived from MITE sequences and the preferential insertion of MITE into gene regions, MITEs may contribute to the genomic diversity and differentiation of bamboo.

Single-Cell (Meta-)Genomics of a Dimorphic Candidatus Thiomargarita nelsonii Reveals Genomic Plasticity.

The genus Thiomargarita includes the world's largest bacteria. But as uncultured organisms, their physiology, metabolism, and basis for their gigantism are not well understood. Thus, a genomics approach, applied to a single Candidatus Thiomargarita nelsonii cell was employed to explore the genetic potential of one of these enigmatic giant bacteria. The Thiomargarita cell was obtained from an assemblage of budding Ca. T. nelsonii attached to a provannid gastropod shell from Hydrate Ridge, a methane seep offshore of Oregon, USA. Here we present a manually curated genome of Bud S10 resulting from a hybrid assembly of long Pacific Biosciences and short Illumina sequencing reads. With respect to inorganic carbon fixation and sulfur oxidation pathways, the Ca. T. nelsonii Hydrate Ridge Bud S10 genome was similar to marine sister taxa within the family Beggiatoaceae. However, the Bud S10 genome contains genes suggestive of the genetic potential for lithotrophic growth on arsenite and perhaps hydrogen. The genome also revealed that Bud S10 likely respires nitrate via two pathways: a complete denitrification pathway and a dissimilatory nitrate reduction to ammonia pathway. Both pathways have been predicted, but not previously fully elucidated, in the genomes of other large, vacuolated, sulfur-oxidizing bacteria. Surprisingly, the genome also had a high number of unusual features for a bacterium to include the largest number of metacaspases and introns ever reported in a bacterium. Also present, are a large number of other mobile genetic elements, such as insertion sequence (IS) transposable elements and miniature inverted-repeat transposable elements (MITEs). In some cases, mobile genetic elements disrupted key genes in metabolic pathways. For example, a MITE interrupts hupL, which encodes the large subunit of the hydrogenase in hydrogen oxidation. Moreover, we detected a group I intron in one of the most critical genes in the sulfur oxidation pathway, dsrA. The dsrA group I intron also carried a MITE sequence that, like the hupL MITE family, occurs broadly across the genome. The presence of a high degree of mobile elements in genes central to Thiomargarita's core metabolism has not been previously reported in free-living bacteria and suggests a highly mutable genome.

IMITEdb: the genome-wide landscape of miniature inverted-repeat transposable elements in insects.

Miniature inverted-repeat transposable elements (MITEs) have attracted much attention due to their widespread occurrence and high copy numbers in eukaryotic genomes. However, the systematic knowledge about MITEs in insects and other animals is still lacking. In this study, we identified 6012 MITE families from 98 insect species genomes. Comparison of these MITEs with known MITEs in the NCBI non-redundant database and Repbase showed that 5701(∼95%) of 6012 MITE families are novel. The abundance of MITEs varies drastically among different insect species, and significantly correlates with genome size. In general, larger genomes contain more MITEs than small genomes. Furthermore, all identified MITEs were included in a newly constructed database (iMITEdb) (http://gene.cqu.edu.cn/iMITEdb/), which has functions such as browse, search, BLAST and download. Overall, our results not only provide insight on insect MITEs but will also improve assembly and annotation of insect genomes. More importantly, the results presented in this study will promote studies of MITEs function, evolution and application in insects.Database URL: http://gene.cqu.edu.cn/iMITEdb/

Precise karyotyping of carrot mitotic chromosomes using multicolour-FISH with repetitive DNA

Carrot (Daucus carota L.) chromosomes are small and uniform in shape and length. Here, mitotic chromosomes were subjected to multicolour fluorescence in situ hybridization (mFISH) with probes derived from conserved plant repetitive DNA (18-25S and 5S rDNA, telomeres), a carrot-specific centromeric repeat (Cent-Dc), carrot-specific repetitive elements (DCREs), and miniature inverted-repeat transposable elements (MITEs). A set of major chromosomal landmarks comprising rDNA and telomeric and centromeric sequences in combination with chromosomal measurements enabled discrimination of carrot chromosomes. In addition, reproducible and unique FISH patterns generated by three carrot genome-specific repeats (DCRE22, DCRE16, and DCRE9) and two transposon families (DcSto and Krak) in combination with telomeric and centromeric reference probes allowed identification of chromosome pairs and construction of detailed carrot karyotypes. Hybridization patterns for DCREs were observed as pericentromeric and interstitial dotted tracks (DCRE22), signals in pericentromeric regions (DCRE16), or scattered signals (DCRE9) along chromosomes similar to those observed for both MITE families.

Evolutionary genomics of miniature inverted-repeat transposable elements (MITEs) in Brassica.

Miniature inverted-repeat transposable elements (MITEs) are truncated derivatives of autonomous DNA transposons, and are dispersed abundantly in most eukaryotic genomes. We aimed to characterize various MITEs families in Brassica in terms of their presence, sequence characteristics and evolutionary activity. Dot plot analyses involving comparison of homoeologous bacterial artificial chromosome (BAC) sequences allowed identification of 15 novel families of mobile MITEs. Of which, 5 were Stowaway-like with TA Target Site Duplications (TSDs), 4 Tourist-like with TAA/TTA TSDs, 5 Mutator-like with 9-10bp TSDs and 1 novel MITE (BoXMITE1) flanked by 3bp TSDs. Our data suggested that there are about 30,000 MITE-related sequences in Brassica rapa and B. oleracea genomes. In situ hybridization showed one abundant family was dispersed in the A-genome, while another was located near 45S rDNA sites. PCR analysis using primers flanking sequences of MITE elements detected MITE insertion polymorphisms between and within the three Brassica (AA, BB, CC) genomes, with many insertions being specific to single genomes and others showing evidence of more recent evolutionary insertions. Our BAC sequence comparison strategy enables identification of evolutionarily active MITEs with no prior knowledge of MITE sequences. The details of MITE families reported in Brassica enable their identification, characterization and annotation. Insertion polymorphisms of MITEs and their transposition activity indicated important mechanism of genome evolution and diversification. MITE families derived from known Mariner, Harbinger and Mutator DNA transposons were discovered, as well as some novel structures. The identification of Brassica MITEs will have broad applications in Brassica genomics, breeding, hybridization and phylogeny through their use as DNA markers.

Widespread and evolutionary analysis of a MITE family Monkey King in Brassicaceae.

BackgroundMiniature inverted repeat transposable elements (MITEs) are important components of eukaryotic genomes, with hundreds of families and many copies, which may play important roles in gene regulation and genome evolution. However, few studies have investigated the molecular mechanisms involved. In our previous study, a Tourist-like MITE, Monkey King, was identified from the promoter region of a flowering time gene, BnFLC.A10, in Brassica napus. Based on this MITE, the characteristics and potential roles on gene regulation of the MITE family were analyzed in Brassicaceae.ResultsThe characteristics of the Tourist-like MITE family Monkey King in Brassicaceae, including its distribution, copies and insertion sites in the genomes of major Brassicaceae species were analyzed in this study. Monkey King was actively amplified in Brassica after divergence from Arabidopsis, which was indicated by the prompt increase in copy number and by phylogenetic analysis. The genomic variations caused by Monkey King insertions, both intra- and inter-species in Brassica, were traced by PCR amplification. Genomic sequence analysis showed that most complete Monkey King elements are located in gene-rich regions, less than 3kb from genes, in both the B. rapa and A. thaliana genomes. Sixty-seven Brassica expressed sequence tags carrying Monkey King fragments were also identified from the NCBI database. Bisulfite sequencing identified specific DNA methylation of cytosine residues in the Monkey King sequence. A fragment containing putative TATA-box motifs in the MITE sequence could bind with nuclear protein(s) extracted from leaves of B. napus plants. A Monkey King-related microRNA, bna-miR6031, was identified in the microRNA database. In transgenic A. thaliana, when the Monkey King element was inserted upstream of 35S promoter, the promoter activity was weakened.ConclusionMonkey King, a Brassicaceae Tourist-like MITE family, has amplified relatively recently and has induced intra- and inter-species genomic variations in Brassica. Monkey King elements are most abundant in the vicinity of genes and may have a substantial effect on genome-wide gene regulation in Brassicaceae. Monkey King insertions potentially regulate gene expression and genome evolution through epigenetic modification and new regulatory motif production.Electronic supplementary materialThe online version of this article (doi:10.1186/s12870-015-0490-9) contains supplementary material, which is available to authorized users.