Miniature Inverted-repeat Transposable Elements Research Articles

MITE Digger, an efficient and accurate algorithm for genome wide discovery of miniature inverted repeat transposable elements

BackgroundMiniature inverted repeat transposable elements (MITEs) are abundant non-autonomous elements, playing important roles in shaping gene and genome evolution. Their characteristic structural features are suitable for automated identification by computational approaches, however, de novo MITE discovery at genomic levels is still resource expensive. Efficient and accurate computational tools are desirable. Existing algorithms process every member of a MITE family, therefore a major portion of the computing task is redundant.ResultsIn this study, redundant computing steps were analyzed and a novel algorithm emphasizing on the reduction of such redundant computing was implemented in MITE Digger. It completed processing the whole rice genome sequence database in ~15 hours and produced 332 MITE candidates with low false positive (1.8%) and false negative (0.9%) rates. MITE Digger was also tested for genome wide MITE discovery with four other genomes.ConclusionsMITE Digger is efficient and accurate for genome wide retrieval of MITEs. Its user friendly interface further facilitates genome wide analyses of MITEs on a routine basis. The MITE Digger program is available at: http://labs.csb.utoronto.ca/yang/MITEDigger.

DcSto: carrot Stowaway-like elements are abundant, diverse, and polymorphic

We investigated nine families of Stowaway-like miniature inverted-repeat transposable elements (MITEs) in the carrot genome, named DcSto1 to DcSto9. All of them were AT-rich and shared a highly conserved 6 bp-long TIR typical for Stowaways. The copy number of DcSto1 elements was estimated as ca. 5,000 per diploid genome. We observed preference for clustered insertions of DcSto and other MITEs. Distribution of DcSto1 hybridization signals revealed presence of DcSto1 clusters within euchromatic regions along all chromosomes. An arrangement of eight regions encompassing DcSto insertion sites, studied in detail, was highly variable among plants representing different populations of Daucus carota. All of these insertions were polymorphic which most likely suggests a very recent mobilization of those elements. Insertions of DcSto near carrot genes and presence of putative promoters, regulatory motifs, and polyA signals within their sequences might suggest a possible involvement of DcSto in the regulation of gene expression.Electronic supplementary materialThe online version of this article (doi:10.1007/s10709-013-9725-6) contains supplementary material, which is available to authorized users.

A Rice Stowaway MITE for Gene Transfer in Yeast

Miniature inverted repeat transposable elements (MITEs) lack protein coding capacity and often share very limited sequence similarity with potential autonomous elements. Their capability of efficient transposition and dramatic amplification led to the proposition that MITEs are an untapped rich source of materials for transposable element (TE) based genetic tools. To test the concept of using MITE sequence in gene transfer, a rice Stowaway MITE previously shown to excise efficiently in yeast was engineered to carry cargo genes (neo and gfp) for delivery into the budding yeast genome. Efficient excision of the cargo gene cassettes was observed even though the excision frequency generally decreases with the increase of the cargo sizes. Excised elements insert into new genomic loci efficiently, with about 65% of the obtained insertion sites located in genes. Elements at the primary insertion sites can be remobilized, frequently resulting in copy number increase of the element. Surprisingly, the orientation of a cargo gene (neo) on a construct bearing dual reporter genes (gfp and neo) was found to have a dramatic effect on transposition frequency. These results demonstrated the concept that MITE sequences can be useful in engineering genetic tools to deliver cargo genes into eukaryotic genomes.

A Divergent P Element and Its Associated MITE, BuT5, Generate Chromosomal Inversions and Are Widespread within the Drosophila repleta Species Group

The transposon BuT5 caused two chromosomal inversions fixed in two Drosophila species of the repleta group, D. mojavensis and D. uniseta. BuT5 copies are approximately 1-kb long, lack any coding capacity, and do not resemble any other transposable element (TE). Because of its elusive features, BuT5 has remained unclassified to date. To fully characterize BuT5, we carried out bioinformatic similarity searches in available sequenced genomes, including 21 Drosophila species. Significant hits were only recovered for D. mojavensis genome, where 48 copies were retrieved, 22 of them approximately 1-kb long. Polymerase chain reaction (PCR) and dot blot analyses on 54 Drosophila species showed that BuT5 is homogeneous in size and has a widespread distribution within the repleta group. Thus, BuT5 can be considered as a miniature inverted-repeat TE. A detailed analysis of the BuT5 hits in D. mojavensis revealed three partial copies of a transposon with ends very similar to BuT5 and a P-element-like transposase-encoding region in between. A putatively autonomous copy of this P element was isolated by PCR from D. buzzatii. This copy is 3,386-bp long and possesses a seven-exon gene coding for an 822-aa transposase. Exon–intron boundaries were confirmed by reverse transcriptase-PCR experiments. A phylogenetic tree built with insect P superfamily transposases showed that the D. buzzatii P element belongs to an early diverging lineage within the P-element family. This divergent P element is likely the master transposon mobilizing BuT5. The BuT5/P element partnership probably dates back approximately 16 Ma and is the ultimate responsible for the generation of the two chromosomal inversions in the Drosophila repleta species group.

Loss-of-Function of a Ubiquitin-Related Modifier Promotes the Mobilization of the Active MITE mPing

Miniature inverted-repeat transposable elements (MITEs) are widespread in both prokaryotic and eukaryotic genomes, where their copy numbers can attain several thousands. Little is known, however, about the genetic factor(s) affecting their transpositions. Here, we show that disruption of a gene encoding ubiquitin-like protein markedly enhances the transposition activity of a MITE mPing in intact rice plants without any exogenous stresses. We found that the transposition activity of mPing is far higher in the lines harboring a non-functional allele at the Rurm1 (Rice ubiquitin-related modifier-1) locus than in the wild-type line. Although the alteration of cytosine methylation pattern triggers the activation of transposable elements under exogenous stress conditions, the methylation degrees in the whole genome, the mPing-body region, and the mPing-flanking regions of the non-functional Rurm1 line were unchanged. This study provides experimental evidence for one of the models of genome shock theory that genetic accidents within cells enhance the transposition activities of transposable elements.

Genomics and genetics ofSulfolobus islandicusLAL14/1, a model hyperthermophilic archaeon

The 2 465 177 bp genome of Sulfolobus islandicus LAL14/1, host of the model rudivirus SIRV2, was sequenced. Exhaustive comparative genomic analysis of S. islandicus LAL14/1 and the nine other completely sequenced S. islandicus strains isolated from Iceland, Russia and USA revealed a highly syntenic common core genome of approximately 2 Mb and a long hyperplastic region containing most of the strain-specific genes. In LAL14/1, the latter region is enriched in insertion sequences, CRISPR (clustered regularly interspaced short palindromic repeats), glycosyl transferase genes, toxin–antitoxin genes and MITE (miniature inverted-repeat transposable elements). The tRNA genes of LAL14/1 are preferential targets for the integration of mobile elements but clusters of atypical genes (CAG) are also integrated elsewhere in the genome. LAL14/1 carries five CRISPR loci with 10 per cent of spacers matching perfectly or imperfectly the genomes of archaeal viruses and plasmids found in the Icelandic hot springs. Strikingly, the CRISPR_2 region of LAL14/1 carries an unusually long 1.9 kb spacer interspersed between two repeat regions and displays a high similarity to pING1-like conjugative plasmids. Finally, we have developed a genetic system for S. islandicus LAL14/1 and created ΔpyrEF and ΔCRISPR_1 mutants using double cross-over and pop-in/pop-out approaches, respectively. Thus, LAL14/1 is a promising model to study virus–host interactions and the CRISPR/Cas defence mechanism in Archaea.

Miniature inverted-repeat transposable elements: discovery, distribution, and activity

Eukaryotic organisms have dynamic genomes, with transposable elements (TEs) as a major contributing factor. Although the large autonomous TEs can significantly shape genomic structures during evolution, genomes often harbor more miniature nonautonomous TEs that can infest genomic niches where large TEs are rare. In spite of their cut-and-paste transposition mechanisms that do not inherently favor copy number increase, miniature inverted-repeat transposable elements (MITEs) are abundant in eukaryotic genomes and exist in high copy numbers. Based on the large number of MITE families revealed in previous studies, accurate annotation of MITEs, particularly in newly sequenced genomes, will identify more genomes highly rich in these elements. Novel families identified from these analyses, together with the currently known families, will further deepen our understanding of the origins, transposase sources, and dramatic amplification of these elements.

Transposable element-associated microRNA hairpins produce 21-nt sRNAs integrated into typical microRNA pathways in rice

microRNAs (miRNAs) are a class of small RNAs (sRNAs) of ~21 nucleotides (nt) in length processed from foldback hairpins by dicer-like1 (DCL1) or DCL4. They regulate the expression of target mRNAs by base pairing through RNA-induced silencing complex (RISC). In the RISC, Argonaute1 (AGO1) is the key protein that cleaves miRNA targets at position ten of a miRNA:target duplex. The authenticity of many annotated rice miRNA hairpins is under debate because of their homology to repeat sequences. Some of them, like miR1884b, have been removed from the current release of miRBase based on incomplete information. In this study, we investigated the association of transposable element (TE)-derived miRNAs with typical miRNA pathways (DCL1/4- and AGO1-dependent) using publicly available deep sequencing datasets. Seven miRNA hairpins with 13 unique sRNAs were specifically enriched in AGO1 immunoprecipitation samples and relatively reduced in DCL1/4 knockdown genotypes. Interestingly, these species are ~21-nt long, instead of 24-nt as annotated in miRBase and the literature. Their expression profiles meet current criteria for functional annotation of miRNAs. In addition, diagnostic cleavage tags were found in degradome datasets for predicted target mRNAs. Most of these miRNA hairpins share significant homology with miniature inverted-repeat transposable elements, one type of abundant DNA transposons in rice. Finally, the root-specific production of a 24-nt miRNA-like sRNA was confirmed by RNA blot for a novel EST that maps to the 3'-UTR of a candidate pseudogene showing extensive sequence homology to miR1884b hairpin. Our data are consistent with the hypothesis that TEs can serve as a driving force for the evolution of some MIRNAs, where co-opting of DICER-LIKE1/4 processing and integration into AGO1 could exapt transcribed TE-associated hairpins into typical miRNA pathways.

Genetic characterization and mapping of the Rht-1 homoeologs and flanking sequences in wheat

The introgression of Reduced height (Rht)-B1b and Rht-D1b into bread wheat (Triticum aestivum) varieties beginning in the 1960s led to improved lodging resistance and yield, providing a major contribution to the 'green revolution'. Although wheat Rht-1 and surrounding sequence is available, the genetic composition of this region has not been examined in a homoeologous series. To determine this, three Rht-1-containing bacterial artificial chromosome (BAC) sequences derived from the A, B, and D genomes of the bread wheat variety Chinese Spring (CS) were fully assembled and analyzed. This revealed that Rht-1 and two upstream genes were highly conserved among the homoeologs. In contrast, transposable elements (TEs) were not conserved among homoeologs with the exception of intronic miniature inverted-repeat TEs (MITEs). In relation to the Triticum urartu ancestral line, CS-A genic sequences were highly conserved and several colinear TEs were present. Comparative analysis of the CS wheat BAC sequences with assembled Poaceae genomes showed gene synteny and amino acid sequences were well preserved. Further 5' and 3' of the wheat BAC sequences, a high degree of gene colinearity is present among the assembled Poaceae genomes. In the 20kb of sequence flanking Rht-1, five conserved non-coding sequences (CNSs) were present among the CS wheat homoeologs and among all the Poaceae members examined. Rht-A1 was mapped to the long arm of chromosome 4 and three closely flanking genetic markers were identified. The tools developed herein will enable detailed studies of Rht-1 and linked genes that affect abiotic and biotic stress response in wheat.

Mis‐expression of a PISTILLATA‐like MADS box gene prevents fruit development in grapevine

The FLESHLESS BERRY (Flb) somatic variant identified in the grapevine cultivar Ugni Blanc develops grape berries without flesh, suggesting a role for the altered gene in differentiation of flesh cells. Here we describe identification of the molecular defect responsible for this phenotype. Using a combination of genetic and transcriptomic approaches, we detected the insertion of a miniature inverted-repeat transposable element in the promoter region of the PISTILLATA-like (VvPI) gene, the grapevine homologue of Arabidopsis PISTILLATA. The transposon insertion causes specific ectopic expression of the corresponding VvPI allele during early fruit development, causing expression of genes specific for petal and stamen development within the fruit. A causal relationship between the insertion and the phenotype was demonstrated by phenotypic and molecular analyses of somatic revertants showing that ectopic expression and mutant phenotype were always linked to the presence of the transposon insertion. The various phenotypic effects of the flb mutation on ovary morphology, fruit set and fruit development, depending on the cell lineage affected, are presented for each phenotype, offering new insights into floral and fleshly fruit development. The results highlight the importance of VvPI repression after fertilization to achieve normal fleshy fruit development, and the complex genetic, genomic and cellular interactions required for the flower to fruit transition in grapevine.

In and out of the rRNA genes: characterization of Pokey elements in the sequenced Daphnia genome

BackgroundOnly a few transposable elements are known to exhibit site-specific insertion patterns, including the well-studied R-element retrotransposons that insert into specific sites within the multigene rDNA. The only known rDNA-specific DNA transposon, Pokey (superfamily: piggyBac) is found in the freshwater microcrustacean, Daphnia pulex. Here, we present a genome-wide analysis of Pokey based on the recently completed whole genome sequencing project for D. pulex.ResultsPhylogenetic analysis of Pokey elements recovered from the genome sequence revealed the presence of four lineages corresponding to two divergent autonomous families and two related lineages of non-autonomous miniature inverted repeat transposable elements (MITEs). The MITEs are also found at the same 28S rRNA gene insertion site as the Pokey elements, and appear to have arisen as deletion derivatives of autonomous elements. Several copies of the full-length Pokey elements may be capable of producing an active transposase. Surprisingly, both families of Pokey possess a series of 200 bp repeats upstream of the transposase that is derived from the rDNA intergenic spacer (IGS). The IGS sequences within the Pokey elements appear to be evolving in concert with the rDNA units. Finally, analysis of the insertion sites of Pokey elements outside of rDNA showed a target preference for sites similar to the specific sequence that is targeted within rDNA.ConclusionsBased on the target site preference of Pokey elements and the concerted evolution of a segment of the element with the rDNA unit, we propose an evolutionary path by which the ancestors of Pokey elements have invaded the rDNA niche. We discuss how specificity for the rDNA unit may have evolved and how this specificity has played a role in the long-term survival of these elements in the subgenus Daphnia.

Characterization of active ribosomal RNA harboring MITEs insertion in microsporidian Nosema bombycis genome

Microsporidia are a group of obligate intracellular parasites of medical and agricultural importance, which can infect almost all animals, including human beings. Using the genome data of Nosema bombycis, four families of miniature inverted-repeat transposable elements (MITEs) in ribosomal DNA (rDNA) were characterized in the microsporidian N. bombycis and were named LSUME1, ITSME1, SSUME1, and SSUME2, respectively. The genome-wide investigation of these MITEs shows that these MITEs families distribute randomly in N. bombycis genome. All insertion sequences have conserved characteristics of MITEs, the direct repeat sequence and terminal inverted-repeat sequence at both ends of each MITEs sequence. Additionally, using the CLC RNA Workbench Software, secondary structures of rRNA containing MITEs sequence have been predicted and were located in variable region or expansion segment. Furthermore, using two different probes, one is prepared by MITE sequence only (short probe) and the other is prepared by MITE sequence flanking partial rDNA sequence (long probe); northern blotting and dot blotting have been performed to detect the transcriptional and functional activity of the rDNA containing MITEs insertion. Fortunately, we found that the rDNA, which harbors the MITE, not only can be transcripted but also can form a complete ribosome. This is an interesting thing that one gene can keep active even when it has been inserted with another sequence. But the biological and structural significance of this observation is not readily apparent.

Polymorphism pattern at a miniature inverted‐repeat transposable element locus downstream of the domestication gene Teosinte‐branched1 in wild and domesticated pearl millet

Unravelling the mechanisms involved in adaptation to understand plant morphological evolution is a challenging goal. For crop species, identification of molecular causal polymorphisms involved in domestication traits is central to this issue. Pearl millet, a domesticated grass mostly found in semi-arid areas of Africa and India, is an interesting model to address this topic: the domesticated form shares common derived phenotypes with some other cereals such as a decreased ability to develop basal and axillary branches in comparison with the wild phenotype. Two recent studies have shown that the orthologue of the maize gene Teosinte-Branched1 in pearl millet (PgTb1) was probably involved in branching evolution during domestication and that a miniature inverted-repeat transposable element (MITE) of the Tuareg family was inserted in the 3' untranslated region of PgTb1. For a set of 35 wild and domesticated populations, we compared the polymorphism patterns at this MITE and at microsatellite loci. The Tuareg insertion was nearly absent in the wild populations, whereas a strong longitudinal frequency cline was observed in the domesticated populations. The geographical pattern revealed by neutral microsatellite loci clearly demonstrated that isolation by distance does not account for the existence of this cline. However, comparison of population differentiation at the microsatellite and the MITE loci and analyses of the nucleotide polymorphism pattern in the downstream region of PgTb1 did not show evidence that the cline at the MITE locus has been shaped by selection, suggesting the implication of a neutral process. Alternative hypotheses are discussed.

A Tourist-like MITE insertion in the upstream region of the BnFLC.A10 gene is associated with vernalization requirement in rapeseed (Brassica napus L.)

BackgroundRapeseed (Brassica napus L.) has spring and winter genotypes adapted to different growing seasons. Winter genotypes do not flower before the onset of winter, thus leading to a longer vegetative growth period that promotes the accumulation and allocation of more resources to seed production. The development of winter genotypes enabled the rapeseed to spread rapidly from southern to northern Europe and other temperate regions of the world. The molecular basis underlying the evolutionary transition from spring- to winter- type rapeseed is not known, however, and needs to be elucidated.ResultsWe fine-mapped the spring environment specific quantitative trait locus (QTL) for flowering time, qFT10-4,in a doubled haploid (DH) mapping population of rapeseed derived from a cross between Tapidor (winter-type) and Ningyou7 (semi-winter) and delimited the qFT10-4 to an 80-kb region on chromosome A10 of B. napus. The BnFLC.A10 gene, an ortholog of FLOWERING LOCUS C (FLC) in Arabidopsis, was cloned from the QTL. We identified 12 polymorphic sites between BnFLC.A10 parental alleles of the TN-DH population in the upstream region and in intron 1. Expression of both BnFLC.A10 alleles decreased during vernalization, but decreased more slowly in the winter parent Tapidor. Haplotyping and association analysis showed that one of the polymorphic sites upstream of BnFLC.A10 is strongly associated with the vernalization requirement of rapeseed (r2 = 0.93, χ2 = 0.50). This polymorphic site is derived from a Tourist-like miniature inverted-repeat transposable element (MITE) insertion/deletion in the upstream region of BnFLC.A10. The MITE sequence was not present in the BnFLC.A10 gene in spring-type rapeseed, nor in ancestral ‘A’ genome species B. rapa genotypes. Our results suggest that the insertion may have occurred in winter rapeseed after B. napus speciation.ConclusionsOur findings strongly suggest that (i) BnFLC.A10 is the gene underlying qFT10-4, the QTL for phenotypic diversity of flowering time in the TN-DH population, (ii) the allelic diversity caused by MITE insertion/deletion upstream of BnFLC.A10 is one of the major causes of differentiation of winter and spring genotypes in rapeseed and (iii) winter rapeseed has evolved from spring genotypes through selection pressure at the BnFLC.A10 locus, enabling expanded cultivation of rapeseed along the route of Brassica domestication.

Mobilization of the active transposon mPing in interspecific hybrid rice between Oryza sativa and O. glaberrima

Miniature Ping (mPing) is the first active miniature inverted-repeat transposable element to be identified in rice, and its mobilization is activated by stress treatments. We have examined the mobilization of mPing in four NERICA (New Rice for Africa) lines and 13 interspecific lines. All 17 lines are inbred progenies derived from crosses between Oryza sativa variety WAB56-104 as the recurrent parent and the O. glaberrima variety CG14 as the donor parent. We found that 16 of the 17 lines studied inherited mPing together with its autonomous partner, Pong, from WAB56-104. Transposon display of mPing disclosed polymorphic banding patterns among these lines. Most importantly, seven of the lines displayed clear polymorphic banding patterns for mPing, indicating that mPing might have been mobilized in these lines. Locus-specific PCR analysis also confirmed the mobilization of mPing. These results signify that interspecific hybridization may activate the transposition of mPing. Based on these results, we discuss the potential use of the mPing system as an efficient tool for gene tagging in interspecific hybrid rice.

Genome-wide analysis of Stowaway-like MITEs in wheat reveals high sequence conservation, gene association, and genomic diversification.

The diversity and evolution of wheat (Triticum-Aegilops group) genomes is determined, in part, by the activity of transposable elements that constitute a large fraction of the genome (up to 90%). In this study, we retrieved sequences from publicly available wheat databases, including a 454-pyrosequencing database, and analyzed 18,217 insertions of 18 Stowaway-like miniature inverted-repeat transposable element (MITE) families previously characterized in wheat that together account for approximately 1.3 Mb of sequence. All 18 families showed high conservation in length, sequence, and target site preference. Furthermore, approximately 55% of the elements were inserted in transcribed regions, into or near known wheat genes. Notably, we observed significant correlation between the mean length of the MITEs and their copy number. In addition, the genomic composition of nine MITE families was studied by real-time quantitative polymerase chain reaction analysis in 40 accessions of Triticum spp. and Aegilops spp., including diploids, tetraploids, and hexaploids. The quantitative polymerase chain reaction data showed massive and significant intraspecific and interspecific variation as well as genome-specific proliferation and nonadditive quantities in the polyploids. We also observed significant differences in the methylation status of the insertion sites among MITE families. Our data thus suggest a possible role for MITEs in generating genome diversification and in the establishment of nascent polyploid species in wheat.

Transposition of the miniature inverted‐repeat transposable element mimp1 in the wheat pathogen Fusarium culmorum

High-throughput methods are needed for functional genomics analysis in Fusarium culmorum, the cause of crown and foot rot on wheat and a type B trichothecene producer. Our aim was to develop and test the efficacy of a double-component system based on the ability of the impala transposase to transactivate the miniature inverted-repeat transposable element mimp1 of Fusarium oxysporum. We report, for the first time, the application of a tagging system based on a heterologous transposon and of splinkerette-polymerase chain reaction to identify mimp1 flanking regions in the filamentous fungus F. culmorum. Similar to previous observations in Fusarium graminearum, mimp1 transposes in F. culmorum by a cut-and-paste mechanism into TA dinucleotides, which are duplicated on insertion. mimp1 was reinserted in open reading frames in 16.4% (i.e. 10 of 61) of the strains analysed, probably spanning throughout the entire genome of F. culmorum. The effectiveness of the mimp1/impala double-component system for gene tagging in F. culmorum was confirmed phenotypically for a putative aurofusarin gene. This system also allowed the identification of two genes putatively involved in oxidative stress-coping capabilities in F. culmorum, as well as a sequence specific to this fungus, thus suggesting the valuable exploratory role of this tool.

Genotyping Antirrhinum commercial varieties using miniature inverted-repeat transposable elements (MITEs)

A special challenge for variety fingerprinting arises in ornamentals sold as population mixture or F1 hybrids displaying colour combinations. We developed a fingerprint protocol for snapdragon (Antirrhinum spp.) commercial plant material based on mapped miniature inverted-repeat transposable elements. We used 15 MITEs-based markers to discriminate two laboratory inbred lines 165E and Sippe 50 and twelve commercial varieties including six sold as colour mixtures, out of which three were F1 hybrid varieties, three were population mixtures and three single coloured. As MITEs share a common sequence the number of primers was reduced over 33% compared to regular primer pairs. In spite of the obvious variability, we found single markers homozygote for a given variety, and as expected, several heterozygote markers. We developed a dichotomic amplification protocol that allows unambiguous identification of snapdragon varieties thus showing that all varieties have a unique pattern of MITEs marker amplification that allows the reliable genotyping of these ornamental cultivars. Distinctiveness, uniformity and stability of ornamental F1 hybrid varieties can be established using these molecular markers.

Evaluation of Population Structure within Diploid Agrostis Germplasm Based on Miniature Inverted‐Repeat Transposable Elements

ABSTRACTThe bentgrasses (Agrostis spp.) are valuable species to the turfgrass industry. The bentgrasses have complex genomes resulting from interspecific hybridization and polyploidization events. The New England Velvet Bentgrass collection along with diploid germplasm present in the National Plant Germplasm System represent the largest collections of publicly available diploid Agrostis germplasm within the United States. In the present study, 1225 miniature inverted‐repeat transposable element (MITE)‐display genetic markers were used to assess the amount of genetic diversity within a collection of 181 diploid Agrostis selections. Structure v. 2.3.3 was used to determine population structure and suggests that five subpopulations best explain the genetic variation present within this germplasm. An analysis of molecular variance and principal coordinate analysis also supports the subgroupings defined by the Structure analysis. Nine selections were found to be genetically similar to Agrostis stolonifera L. and may be related to one of its diploid progenitors. Our improved understanding of the genetic diversity among these diploid selections, resulting from this study, will help Agrostis breeders transfer important traits from these unimproved selections for cultivar improvement.

Miniature inverted-repeat transposable elements (MITEs) in rice were originated and amplified predominantly after the divergence of Oryza and Brachypodium and contributed considerable diversity to the species

Miniature inverted-repeat transposable elements (MITEs) are ubiquitous in high eukaryotic genomes. More than 178,000 MITE sequences of 338 families are present in the genome of rice (Oryza sativa) cultivar Nipponbare. Interestingly, only two of the 338 MITE families have homologous sequences in the genome of Brachypodium distachyon, a relative in the grass family. Therefore, the vast majority of MITEs in the rice genome were originated and amplified after the divergence of Oryza and Brachypodium. Comparison between rice cultivar Nipponbare and another rice cultivar 93–11 showed 14.8% of MITEs exhibit presence/absence (P/A) polymorphism. The P/A polymorphism was mainly attributed to recent MITE transpositions, while less than 10% of the P/A polymorphism was caused by MITE excisions. Therefore, the high P/A polymorphisms of MITEs may generate considerable gene expression and phenotypic diversity for O. sativa.