Migration Test Research Articles

Designing safe recycled high-density polyethylene (HDPE) for child toys

New high-density polyethylene (HDPE) manufactured from different percentage of post-consumer recycled HDPE milk bottles was studied through two static and dynamic migration tests using saliva simulant to assess the potential hazard to children. Sixty-nine compounds were identified, including several additives used in PE synthesis such as alkanes, alkenes, antioxidants and plasticizers as well as non-intentionally added substances (NIAS) like degradation products such as 2,6-di-tert-butyl-1,4-benzoquinone, 2,4-di-tert-butylphenol, phenol, 2,5-bis(1,1-dimethylethyl)-, 3,5-di-tert-butyl-4-hydroxybenzaldehyde, and 3,5-di-tert-butyl-4-hydroxyacetophenone, or various residues from flavoring agents, cleaning products and essential oils. Some of these compounds as the isomers p and o t-butylcyclohexyl acetate, 3-Octanol, 3,7-dimethyl- and thujanol acetate (3-) pose a potential risk to children, as their concentrations exceed the recommended Cramer values for high percentages of recycling. This suggests improving recycling processes by incorporating advanced cleaning to remove residual products and contaminants.

Assessing the Physiochemical and Sensorial Quality of Pea Sauce Canned in Plastic Trays vs. Metal Cans

Metal cans, while boasting excellent barrier properties, raise concerns about leaching and environmental impacts. This study explored plastic trays, a potential alternative for canned food packaging. First we delved into the plastic tray’s characteristics, including its composition and permeability to oxygen and water vapor. Secondly, we conducted a comparison between the newly introduced plastic packaging and traditional metal cans, focusing on their interactions with food during the sterilization process and their effects on the quality of Tunisian pea sauce. The composition analysis revealed that the plastic tray was composed of polypropylene (PP) (with a single endothermic peak at 168 °C), while the film was found to have a mixture of PP internally and polyethylene terephthalate (PET) externally (with two endothermic peaks at 161.96 °C and 243.81 °C). Plastic trays showed good results in water vapor permeability (0.832 g/m2.d) but exhibited higher oxygen permeability (190 g/m2.d), raising oxidation concerns. Migration testing confirmed plastic packaging safety (<10 mg/dm2), while some simulants exceeded limits in metal cans. pH levels remained consistent between both packaging types, but varied significantly over a 28-day storage. Total Volatile Basic Nitrogen (TVBN) levels differed significantly between plastic and metal packaging, with notable variations observed over time with maximums of 0.3 mg/100 g for plastic trays and 0.17 mg/100 g for metal cans. Sensory evaluation revealed that tasters were adept at differentiating between canned pea sauce in plastic trays and metal cans (83%, 10/12), with taste and color exhibiting significant differences (p < 0.05). This underlines the impact of packaging material on canned food quality and consumer preference, with minimal influence on other sensory aspects. This data empowers manufacturers to make informed packaging decisions for a diverse range of canned foods.

Nationwide Investigation on Organophosphate Flame Retardants in Tea from China: Migration from Packaging Materials and Implications for Global Risk Assessment.

In this study, we measured 15 common organophosphate flame retardants (OPFRs) in six categories of tea samples across China. OPFRs were found in all the tea samples, with the total concentrations of OPFRs (∑OPFRs) at 3.44-432 ng/g [geometric mean (GM): 17.6 ng/g]. Triphenyl phosphate (TPhP) was the dominant OPFR, accounting for 39.0-76.2% of ∑OPFRs across all tea categories. The potential factors influencing the residual OPFRs in tea were thoroughly examined, including the agricultural environment, fermentation, and packaging of teas. Tea packaging materials (TPMs) were then identified as the primary sources of OPFRs in teas. The migration test revealed that OPFRs with lower molecular weights and log Kow values exhibited a higher propensity for facilitating the migration of OPFRs from TPMs to teas. The estimated daily intakes of OPFRs from teas were relatively higher for the general populations in Mauritania, Gambia, Togo, Morocco, and Senegal (3.18-9.79 ng/kg bw/day) than China (3.12 ng/kg bw/day). The health risks arising from OPFRs in Chinese teas were minor. This study established a baseline concentration and demonstrated the contamination sources of OPFRs in Chinese tea for the first time, with an emphasis on enhancing the hygiene standards for TPMs.

Safety assessment of the substances 'wax, rice bran, oxidised' and 'wax, rice bran, oxidised, calcium salt' for use in food contact materials.

The EFSA Panel on Food Contact Materials (FCM) assessed the safety of the substances 'wax, rice bran, oxidised' and 'wax, rice bran, oxidised, calcium salt', used as additives up to 0.3% in polyethylene terephthalate (PET), polyamide (PA), thermoplastic polyurethane (TPU), polylactic acid (PLA) and poly(vinyl chloride) (PVC) in contact with all food types for long-term storage at room temperature and below, after hot-fill and/or heating. The substances consist of the chemical classes wax esters, carboxylic acids, alcohols and calcium salts of acids, along with an unidentified organic fraction up to ■■■■■ w/w. Migration into 10% ethanol and 4% acetic acid was below 0.012 mg/kg for each chemical class, and about 0.001 mg/kg for the unidentified fraction. In isooctane, migration was up to 0.297 mg/kg food for wax esters, below 0.01 mg/kg food for the other chemical classes and about 0.02 mg/kg food for the unidentified fraction. The contact with dry food and food simulated by 20% ethanol were considered covered by the migration tests with aqueous simulants. Based on genotoxicity assays and compositional analyses, the constituents of the chemical classes did not raise a concern for genotoxicity. The potential migration of individual constituents or groups of chemically-related compounds of the unidentified fraction would result in exposures below (for aqueous food) and above (for fatty food) the threshold of toxicological concern for genotoxic carcinogens. Therefore, the FCM Panel concluded that the substances are not of safety concern for the consumer, if used as additives up to 0.3% w/w in PET, PLA and rigid PVC materials and articles intended for contact with all food types except for fatty foods, for long-term storage at room temperature and below, including hot-fill and/or heating up to 100°C for up to 2 h.

MIGRATION INHIBITION ACTIVITY BY METHANOL EXTRACT Hibiscus tiliaceus Linn. ON 4T1 BREAST CANCER

The prevalence of breast cancer cases in Indonesia is increasing along with the ability of cancer cells to migrate or move from the primary tumor mass and form new colonies elsewhere. The migration of cancer cells has encouraged the develop anticancer drugs from natural ingredients. Waru leaves have been shown to have cytotoxic activity. This study aims to determine the inhibition activity of migration of breast cancer cells 4T1 from methanol extract of waru leaves. Waru leaves methanol extract was obtained using the maceration method. Cytotoxic test of methanol extract of waru leaves (MEWL) was the migration test used in the scratch wound healing method at concentrations 162.5, 325, and 650 μg/mL at 0, 18, 24, and 42 hours after treatment. Analysis of IC50 using linear regression, while large areas were analyzed using Image-J software. The percentage of data closure was analyzed statistically with the Anova Repeated Measure test. All concentrations of Methanol Extract of Waru Leaves had significant inhibition of cell migration (p<0,05) compared to control at each observation time at 0, 18, 24, and 42 hours after treatment. So, MEWL is able to inhibit migration in 4T1 cells

Multi-scale study of the effect of superabsorbent polymers on microporosity, dimensional stability, and durability of cementitious materials

As internal curing agents, superabsorbent polymers (SAPs) help enhance the degree of hydration of cement particles. In the meantime, however, they affect the dimensional stability and durability of the mixtures that benefit from them. This critical aspect, which is influenced by the type, size, and dosage of SAPs, motivated the current study. To obtain holistic assessments and side-by-side comparisons, six high-performance mortar mixtures were developed based on a control mixture. The referenced mixtures contained two types, two sizes, and two dosages of SAPs. Initially, the performance characteristics of the SAP powders were determined, in terms of water absorption and desorption. Autogenous shrinkage tests were then performed to evaluate how SAPs contribute to controlling this type of shrinkage over time. The microstructures of the developed mixtures were then analyzed using mercury intrusion porosimetry, paired with scanning electron microscope images, providing fundamental insights into to the role of SAPs in both short and long terms. To correlate the findings to the mechanical properties of the developed mixtures, a set of compressive strength and abrasion resistance tests were performed. The results were then complemented with the data obtained from the rapid chloride migration tests. This study’s outcome showed that SAP particles can effectively reduce the development of autogenous shrinkage-induced strains. Additionally, the inclusion of SAPs was found to alter microstructural characteristics, increasing the density of the binding gel, while introducing capillary pores. This was confirmed through enhanced abrasion resistance and reduced chloride resistivity.

Multilayer Film Comprising Polybutylene Adipate Terephthalate and Cellulose Nanocrystals with High Barrier and Compostable Properties.

In the present study, a multilayer, high-barrier, thin blown film based on a polybutylene adipate terephthalate (PBAT) blend with polyhydroxyalkanoate (PHA), and composed of four layers including a cellulose nanocrystal (CNC) barrier layer and an electrospun poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) hot-tack layer, was characterized in terms of the surface roughness, surface tension, migration, mechanical and peel performance, barrier properties, and disintegration rate. The results showed that the film exhibited a smooth surface. The overall migration tests showed that the material is suitable to be used as a food contact layer. The addition of the CNC interlayer had a significant effect on the mechanical properties of the system, drastically reducing the elongation at break and, thus, the flexibility of the material. The film containing CNCs and electrospun PHBV hot-tack interlayers exhibited firm but not strong adhesion. However, the multilayer was a good barrier to water vapor (2.4 ± 0.1 × 10-12 kg·m-2·s-1·Pa-1), and especially to oxygen (0.5 ± 0.3 × 10-15 m3·m-2·s-1·Pa-1), the permeance of which was reduced by up to 90% when the CNC layer was added. The multilayer system disintegrated completely in 60 days. All in all, the multilayer system developed resulted in a fully compostable structure with significant potential for use in high-barrier food packaging applications.

Hybrid Ethylcellulose Polymeric Films: Ag(I)-Based Components and Curcumin as Reinforcing Ingredients for Enhanced Food Packaging Properties.

Bio-active ethylcellulose (EC) polymeric films have been obtained by incorporating curcumin (curc) and Ag(I)-based compounds, known for their antioxidant and antimicrobial activity, respectively, within the polymeric matrix. The recently reported Ag(I) coordination polymer, in both its structural forms (α-[(bpy)Ag(OTf)]∞ and β-{[(bpy)Ag][OTf]}∞), and the [(bpy)Ag(OTf)]∞-curc polymeric co-crystal (bpy=2,2'-bipyridine; OTf=trifluoromethanesulfonate) have been selected as Ag(I) species. The hybrid composite films have been prepared through the simple solvent casting method and characterized through Powder X-Ray Diffraction (PXRD), Differential Scanning Calorimetry (DSC) and Fourier Transform Infrared (FTIR) spectroscopy, Scanning Electron Microscope (SEM), UV-vis spectroscopy. The deep investigation of the film samples highlighted the non-inert behaviour of EC towards these specific active ingredients. Antimicrobial tests showed that EC films embedding the Ag(I)-based compounds present good antimicrobial performance, in particular against Staphylococcus aureus, used as a model of Gram-positive bacteria. In addition, Silver migration tests, performed on the Ag(I)-incorporating EC films, evidenced low values of silver release particularly in the case of the EC films incorporating [(bpy)Ag(OTf)]∞-curc.

Analysis of Migrant Compounds from Food Packaging: Application to Disposable Tableware and Risk Analysis

Substance migration from nine types of disposable plates made from cardboard, polystyrene (PS), and polypropylene (PP) have been studied. Migration tests were performed in four food simulants over 10 days at 40°C. Simulant extracts were analyzed using SPME-GC-MS and UPLC-QTOF-MS to identify and (semi)quantify volatile and non-volatile migrants, respectively.

A high-throughput flowless microfluidic single and multi-solute concentration gradient generator: Design and parametric study.

Microfluidic concentration gradient generators (μ-CGGs) are critical in various biochemical assays, including cell migration, drug screening, and antimicrobial susceptibility testing. However, current μ-CGGs rely on integration with flow systems, limiting their scalability and widespread adoption owing to limited infrastructure and technical expertise. Hence, there is a need for flowless diffusional gradient generators capable of standalone operation, thereby improving throughput and usability. In this study, we model such a diffusional μ-CGG as an infinite source-sink system to capture two characteristic timescales: (i) gradient generation dictated by the diffusion timescale and (ii) stability determined by the rate of change in reservoir concentrations. Through finite-element simulations, we explored the influence of various geometric parameters such as the channel length, cross-sectional area, node and reservoir volumes, and the solute diffusivity on these timescales, along with experimental confirmation using fluorescent tracer diffusion. Our results show that while the gradient stability strongly depends on the reservoir volumes, diffusion length, and solute diffusion coefficient, they are independent of the node shape or the shape of the channel cross section. However, gradient profiles were found to be the strong functions of the diffusion length, solute diffusivity, and the geometric pattern of the microfluidic grid. Additionally, we showcased the versatility of the design by generating discrete gradient profiles and combinatorial gradients of two and three solutes, thus improving throughput in a wide range of on-chip biological assays. These findings underscore the potential of our microfluidic device as an easy-to-use, inexpensive, efficient, and high-throughput platform for various on-chip biological assays.

Experimental and numerical studies on the chloride diffusion coefficient of calcium silicate hydrate gel

The chloride diffusivity of calcium silicate hydrate (C-S-H), as the main hydration product of cement paste, plays an important role for the durability of concrete structures, especially for low w/c ratio ones. In this paper, in order to measure the chloride diffusion coefficient of C-S-H, a diffusion path conversion method is proposed to convert the primary diffusion path of ions from capillary pores to gel pores. By combining diffusion path conversion method with steady-state migration test, the diffusion coefficients of C-S-H are obtained. Based on 3D nanostructure, which is generated by a hybrid scheme of Grand Canonical Monte Carlo and Molecular Dynamics, the chloride diffusion coefficient of C-S-H is predicted by a 3D diffusive lattice modelling. Results from the experiments and simulation are compared with the data in the literature. Our work contributes to the understanding of C-S-H diffusivity and is of great importance for predicting the long-term durability of concrete structure.

Study of corrosion resistance of superhydrophobic hydrotalcite cement mortar in chlorine salt environment

Reinforced concrete structures are susceptible to reduced service life owing to the erosion caused by the of chlorine-containing, external environment and internal chloride. In this paper, a superhydrophobic hydrotalcite cement mortar was studied with internal and external cooperation against chloride ion erosion. The effect of different hydrotalcite substitution amounts on the chlorine corrosion resistance of the mortar was investigated. The mortar exhibited good resistance to chlorine corrosion, and the corrosion resistance rate increased by 91.83 %. The free chloride ion concentration measurement and rapid chloride migration test exhibited that the prepared mortar effectively resisted chloride ion invasion and reduced the content of free chloride ions in the mortar. The proposed anticorrosion method is expected to have potential application prospects for concrete structures under chloride salt environments.

Versatile biobased biocidal nanomaterial for a safer‐by‐design coated food packaging

AbstractThe preservation of food products using packaging with antimicrobial properties is a major challenge. Using a simple dipping procedure, we propose to functionalize the surface of commercial polypropylene (PP) films with various hybrid components based on biopolymers with silver nanoparticles (AgNPs) that are known for their bactericidal properties. The chosen biopolymers are polysaccharides in solid form such as cellulose nanocrystals (CNC) and chitin nanocrystals (ChiNC), as well as hydrosoluble molecules such as alginate and chitosan for which some OH groups serve as nucleation points for AgNPs. The successful coating was demonstrated via the presence of biopolymers on the PP film surface using electron and fluorescence microscopies. The effective presence of AgNPs on the PP film was then confirmed by atomic absorption spectroscopy measurements. Migration tests performed over 10 days made it possible to track the kinetic release of Ag+ in a food simulant. A persistent and increasing release over time was observed, especially for hybrids in solid form (i.e., CNC/AgNP, ChiNC/AgNP), bearing the smaller AgNPs (20 nm). The maximum value of Ag + released was ~0.30 mg Ag/kg, which is significantly lower than the value authorized by international organizations.

Fresh and hardened properties for a wide range of geopolymer binders – An optimization process

The objective of this study was to identify the optimal geopolymer binder compositions produced from local industrial by-products and compare them with commercially available materials. The first part investigated the optimal binder composition by studying 27 mixtures. In this part of the research, three series of binders were created: the first series of 18 mixtures was Na-based fly ash-slag, the second series consisted of 8 mixtures of K-based fly ash-slag, and the third series were a mixture of metakaolin-slag based geopolymer. The compressive strengths of the mixtures at the age of seven days ranged from 2.18 to 96.23 MPa. The strength development is clearly defined by the components and proportions of the blends. Geopolymers reach about 80% of their 28-day strength in seven days. The 25% water content was optimal for slag-fly ash geopolymers. The strength of the material increased from 68.08 to 96.23 MPa when the Blaine surface area of the slag increased from 3500 to 4500 cm2/g. The optimal proportions of the alkali solution were the intermediate ratios: SiO2/Na2O = 2.0 and SiO2/K2O = 1.5. In the case where Visonta fly ash is prepared for blending, the fly ash content can be maximized by 30%–50% in addition to the blast-furnace slag. In the second part of the research, mortars were prepared from the selected binders: 4 mixtures were prepared with two different binders. In one of these mortars, the solid part of the binder consisted of local raw materials originating from Hungary. This mixture was prepared with 43 m% fine aggregates. The optimal composition of the tested 27 binders tested was selected as the geopolymer matrix for the production of three further mortar mixtures. In these geopolymer mortars, 55, 65, and 75 m% of aggregate applied. The flowtable values of fresh mortars decreased when the proportion of sand increased. The lower the additive content was, the higher the strength of the geopolymer mortar. The 28-day compressive strengths of filtered fly ash-slag mortar sample with 55%, 65%, and 75% of fine aggregate (F–S-a55, F–S-a65, and F–S-a75) made with the selected optimised filtered fly ash-slag geopolymer binder of group A-I.3 (F–S-A-I.3) varied between 11.39 and 40.15 MPa, whereas the Visont fly ash-slag mortar sample with 43% of fine aggregate (V–S-a43) has been 25.05 MPa. For 28 days, the density ranged between 1870 and 2204 kg/m3. The V–S-a43 is found to be the lowest-density blend. The chloride migration test revealed that geopolymer mortars with higher slag content have higher resistance to Cl− ions.

Double-modified, thio and methylene ATP analogue facilitates wound healing in vitro and in vivo

Recent data indicate that extracellular ATP affects wound healing efficacy via P2Y2-dependent signaling pathway. In the current work, we propose double-modified ATP analogue—alpha-thio-beta,gamma-methylene-ATP as a potential therapeutic agent for a skin regeneration. For the better understanding of structure–activity relationship, beside tested ATP analogues, the appropriate single-modified derivatives of target compound, such as alpha-thio-ATP and beta,gamma-methylene-ATP, were also tested in the context of their involvement in the activation of ATP-dependent purinergic signaling pathway via the P2Y2 receptor. The diastereomerically pure alpha-thio-modified-ATP derivatives were obtained using the oxathiaphospholane method as separate SP and RP diastereomers. Both the single- and double- modified ATP analogues were then tested for their impact on the viability and migration of human keratinocytes. The involvement of P2Y2-dependent purinergic signaling was analyzed in silico by molecular docking of the tested compounds to the P2Y2 receptor and experimentally by studying intracellular calcium mobilization in the human keratinocytes HaCaT. The effects obtained for ATP analogues were compared with the results for ATP as a natural P2Y2 agonist. To confirm the contribution of the P2Y2 receptor to the observed effects, the tests were also performed in the presence of the selective P2Y2 antagonist—AR-C118925XX. The ability of the alpha-thio-beta,gamma-methylene-ATP to influence cell migration was analyzed in vitro on the model HaCaT and MDA-MB-231 cells by wound healing assay and transwell migration test as well as in vivo using zebrafish system. The impact on tissue regeneration was estimated based on the regrowth rate of cut zebrafish tails. The in vitro and in vivo studies have shown that the SP-alpha-thio-beta,gamma-methylene-ATP analogue promotes regeneration-related processes, making it a suitable agent for enhance wound healing. Performed studies indicated its impact on the cell migration, induction of epithelial–mesenchymal transition and intracellular calcium mobilization. The enhanced regeneration of cut zebrafish tails confirmed the pro-regenerative activity of this ATP analogue. Based on the performed studies, the SP-alpha-thio-beta,gamma-methylene-ATP is proposed as a potential therapeutic agent for wound healing and skin regeneration treatment.

Analysis and removal of bisphenols in recycled plastics using polyethylene glycol

This study examines the presence of bisphenol A (BPA), S (BPS), F (BPF), and M (BPM) in various recycled plastics readily available on the market (LDPE, HDPE, PET, and PP), in light of European Food Safety Authority (EFSA) limits. Twenty samples of different origin are analyzed, cleaning treatments are applied, and the migration potential of these bisphenols into food is studied. BPM is absent in all samples, but a post-consumer recycled LDPE sample reveals high bisphenol concentrations, raising concerns, reaching 8540 ng/g, 370 ng/g, and 29 ng/g of BPA, BPS, and BPF, respectively. Migration tests show substantial migration of these contaminants into food simulants. Using a cleaning treatment with polyethylene glycol (PEG 400) reduces BPA in LDPE, HDPE, PP, and PET samples by 95%, 99%, 97% and 28%, respectively, highlighting the importance of cleaning treatments across various polymers in plastic recycling. These findings not only protect food safety but addressing environmental challenges associated with plastic recycling.

Non-targeted analysis of per- and polyfluorinated substances in consumer food packaging

This study sought to develop a non-targeted workflow using high-resolution mass spectrometry (HRMS) to investigate previously unknown PFAS in consumer food packaging samples. Samples composed of various materials for different food types were subjected to methanolic extraction, controlled migration with food simulants and total oxidizable precursor (TOP) assay. The developed HRMS workflow utilized many signatures unique to PFAS compounds: negative mass defect, diagnostic breakdown structures, as well as retention time prediction. Potential PFAS features were identified in all packaging studied, regardless of food and material types. Five tentatively identified compounds were confirmed with analytical standards: 6:2 fluorotelomer phosphate diester (6:2 diPAP) and one of its intermediate breakdown products 2H-perfluoro-2-octenoic acid (6:2 FTUCA), perfluoropentadecanoic acid (PFPeDA), perfluorohexadecanoic acid (PFHxDA) and perfluorooctadecanoic acid (PFOcDA). Longer perfluorocarboxylic acids including C17 and C19 to C24 were also found present within a foil sample. Concentrations of 6:2 FTUCA ranged from 0.78 to 127 ng g−1 in methanolic extracts and up to 6 ng g−1 in food simulant after 240 h migration test. These results demonstrate the prevalence of both emerging and legacy PFAS in food packaging samples and highlight the usefulness of non-targeted tools to identify PFAS not included in targeted methods.

Prevalence of synthetic phenolic antioxidants in food contact materials from China and their implications for human dietary exposure through take-away food

The application of disposable tableware has increased substantially in recent times due to the rapidly growing food delivery business in China. Synthetic phenolic antioxidants (SPAs) are widely used in food contact materials (FCMs) to delay the process of oxidation; however, their compositions, concentrations, and potential health hazards remain unclear. Therefore, FCMs comprised of five materials obtained from 19 categories (n = 118) in China were analyzed for SPAs concentrations. FCMs have been found to contain a variety of SPAs, with ∑SPAs concentrations ranging from 44.18 to 69,485.12 μg/kg (median: 2615.63 μg/kg). The predominant congeners identified in the sample include 2,4-di-tert-butylphenol (2,4-DTBP), 2,6-di-tert-butylphenol (2,6-DTBP), and 2,6-di-tert-butyl-p-benzoquinone (BHT-Q) with a median concentration of 885.75, 555.45 and of 217.44 μg/kg, respectively. Milky tea paper cups, instant noodle buckets, milky teacups, and disposable cups showed high levels of SPAs. 2,2′-methylenebis(4-methyl-6-tert-butylphenol) (AO 2246) was predominantly detected in polyethylene and polyethylene terephthalate-based products. The migration test identified disposable plastic cups and bowls as the predominant FCMs and 2,4-DTBP as the dominant SPA. The exposure risk of SPAs decreased with age. In children, the estimated daily intake of ∑SPAs from FCMs was determined to be 17.56 ng/kg body weight/day, which was 8.3 times higher than that of phthalic acid esters. The current findings indicate the potential ingestion risk of SPAs during the daily life application of multiple FCM categories.

Strength Assessment of RCC Beam With Partial Replacement of Metakaolin and Marble Dust

The most popular and adaptable building material is concrete, which is typically used to withstand compressive stress. A few pozzolanic elements can be added as admixtures to improve the various qualities of concrete. Calcified clay, or metakaolin, is widely accessible in Gujarat, Maharashtra, Bombay, and other places. It is the clay mineral kaolinite in a dehydroxylated state. Metakaolin particles are smaller than cement particles in size. Marble dust is produced by the industries that cut and manufacture marble. Approximately 3500 metric tons of marble dust slurry is produced daily in India. Therefore, marble dust may be found extremely cheaply and simply. Because marble dust has some advantages over cement, it is recommended to utilize it in part. The current study details an experimental program designed to explore the flexural behavior of reinforced concrete beams where river sand was partially replaced with marble powder in preparation for concrete and metakaolin was used in place of some of the cement. In this work, partial cement replacement has been carried out using MK (Metakaolin) at 5% and 10% and MP (Marble Powder) at 5%, 10%, 15%, and 20%. Concrete manufactured with MK-MP has been compared to conventional concrete of grade M30 in terms of both compressive and tensile strength. The Rapid Chloride Migration Test, or RCMT, was also used to examine the durability of concrete.

Expanded polystyrene waste valorization as a hydrophobic coating II: packaging application

The application of the expanded polystyrene (EPS) waste to the functional material is still a challenge. The hydrophobic property of polystyrene has a potential to create a superhydrophobic surface. Here, we use expanded polystyrene waste to coat surfaces in two different ways—spray coating and dip coating—to produce superhydrophobic surfaces for food packaging. The ZnO was employed to make the surface rougher. However, the combination of ZnO and EPS waste produces only a hydrophobic surface. For spray coating and dip coating, the maximum water contact angle is 119° and 125° respectively. The scanning electron microscope (SEM) picture reveals many holes that increase the surface's roughness. The hydrophobic surface significantly cuts down on cleaning time. According to the food packaging parameter test mandated by the Indonesian Food and Drug Administration (BPOM) (BPOM regulation No. 20, 2019), the coating complies with heavy metals and ethanol stimulant migration testing requirements for food packaging. However, the migration condition in acetic acid stimulant surpasses the maximum standard. The total migration in 3% acetic acid stimulant (40°C for 10 days) is 22.95 mg/dm2 while the maximum value is 10 mg/dm2.