Directional Migration Research Articles

How Induced Earthquakes Respond to Pre‐Existing Fractures and Hydraulic Fracturing Operations? A Case Study in South China

AbstractHydraulic fracturing in shale gas production can induce felt earthquakes, making it crucial to understand and mitigate induced earthquakes. The Cen'gong shale gas block in South China offers extensive data—3D seismic, geological structure, microseismic data, and detailed stimulation operations—allowing a comprehensive investigation into induced earthquakes by hydraulic fracturing. Using a dense temporary seismic array and deep‐learning workflows, we build a high precision earthquake catalog and determine their focal mechanisms. Pre‐existing fractures are identified through the Ant Tracking attribute derived from the 3D seismic data. We analyze the distribution, frequency, magnitude, and focal mechanisms of induced earthquakes, compare them spatially with the distribution of the pre‐existing fractures, and track their temporal changes during and after hydraulic fracturing. Most induced earthquakes occurred along pre‐existing fractures, exhibiting relatively larger magnitudes and persistent trailing seismicity. The number of trailing seismicity is proportional to the response time of stimulation earthquakes. The focal mechanism solutions suggest that the rupture mechanism of the trailing seismicity remained unchanged. By analyzing four clusters of earthquakes, we found that in two of these clusters, the induced earthquakes initiated from the far side of the fractures, then linearly migrated along the pre‐existing fractures. This directional migration pattern is explained by stress rotation along the fractures. Our analysis suggests that both pre‐existing fractures and stimulation operations significantly influence induced earthquake occurrences. Therefore, this work may enhance our understanding of pre‐existing fractures, and optimizing stimulation operations can mitigate earthquake hazards in shale gas production.

Insight into photocatalytic chlortetracycline degradation by WO3/AgI S-scheme heterojunction: DFT calculation, degradation pathway and electron transfer mechanism

The construction of S-scheme heterojunction with excellent redox ability holds promising prospects for photocatalytic environment remediation. However, the rationally design of the heterojunction interface to achieve efficient charge transfer still faces challenges. In this study, we fabricated a tight-contacted S-scheme heterojunction by in situ anchoring AgI nanoparticles onto WO3 nanoplates. The significant difference in Fermi energy levels between WO3 and AgI results in the formation of a space charge region around the interface and bending of the energy band, facilitating directional migration and spatial separation of charge carriers. This contributes to enhanced generation of superoxide radicals (•O2−) and holes (h+) active species, leading to a significant increase in chlortetracycline (CTC) degradation rate. The apparent rate constant for CTC removal using the WO3/AgI (WA-2) is approximately 15 times higher than that observed for pure WO3. Furthermore, WA-2 exhibits universal degradation effects on tetracycline (TC) and oxytetracycline (OTC). Molecular dynamics (MD) simulation reveals the synergistic adsorption effect of WO3 and AgI on CTC and reactive oxygen species molecules. Based on Fukui function calculation of CTC molecules and degradation intermediates, liquid chromatography-mass spectrometry (LC-MS) analysis, photocatalytic degradation pathway over WO3/AgI was determined to be sequential demethylation followed by dechlorination and decarbonylation. These findings provide valuable insights into high-performance S-scheme heterojunctions interface design and elucidation of pollutant degradation mechanism.

In-situ Fe–O co-doped carbon nitride heterogenous catalyst for enhanced photo-Fenton oxidation performance towards recalcitrant organic pollutants

One-step and in-situ FeCl3-participated molten urea thermal polymerization strategy is designed to prepare Fe–O co-doped carbon nitride photo-Fenton catalyst (Fe/OCN). Fe/OCN exhibits remarkable photo-Fenton catalytic oxidation capacity towards recalcitrant organic pollutants, in which 0.31 wt% Fe/OCN with optimal Fe-doping level exhibits significantly 60 and 6.3 times higher pseudo-first-order kinetic constant than single photocatalysis and Fenton system in the degradation of methyl orange. The enhancement of photo-Fenton catalytic performance is mainly ascribed to the realization of ideal Fe–O and Fe–N coordination structure in the framework of polymeric carbon nitride, which can not only serve as prime sites for the adsorption of target pollutants molecules and transfer channels for directed migration of photogenerated charges, but also well-modulate electronic structure and band structure of Fe/OCN. Accordingly, the resulting boosted charge carriers separation and transfer dynamics and increased electron density around Fe active centers facilitate ≡Fe(II) regeneration and H2O2 activation, leading to the significant production of plentiful reactive species responsible for degradation and mineralization of organic pollutants. The present work provides new insight into the optimized design and precise regulation of carbon nitride-based photo-Fenton system for advanced wastewater treatment.

Strong electron coupling effect of non-precious metal Schottky junctions enhanced square meter level photocatalytic hydrogen evolution

Photocatalytic hydrogen production technology utilizes solar energy to decompose water into hydrogen, helping to alleviate the pressure of energy depletion. Engineering of non-precious metal nanomaterials as cocatalysts can play a significant role in low-cost, sustainable, and large-scale photocatalytic hydrogen production. Herein, MnCdS-Vs/NiCo2S4 (MCSN) Schottky junction nanomaterials with strong electron coupling effect were prepared by a two-step hydrothermal method and successfully applied to a square meter hydrogen evolution device. The optimized MCSN material demonstrated high hydrogen evolution activity of 34.28 mmol g−1 h−1, which is 9.34 and 685.60 times higher than that of pure MnCdS-Vs and NiCo2S4, respectively. More importantly, in a square meter (1 m2) flat-plate reactor, MCSN produced H2 evolution approximately 201 mmol in 5 h, showcasing its potential for large-scale applications. In-situ XPS and DFT calculations demonstrated that MnCdS-Vs interacts with NiCo2S4 to produce a strong electron coupling effect and form a Schottky junction. It promotes the facilitated the directional migration of photogenerated electrons from MnCdS-Vs to NiCo2S4, but also effectively suppressed electron backflow through the Schottky barrier. Furthermore, the abundance of sulfur vacancies enhanced visible light absorption capability, further improving photocatalytic hydrogen evolution performance. This work delves into the role of defect engineering and Schottky junction design in enhancing photocatalytic performance, providing new insights into transitioning photocatalytic hydrogen production technologies from small-scale laboratory experiments to large-scale practical applications.

Hollow TiO2/Bi2MoO6 Janus-nanofibers for photo-reforming of antibiotics into carbon monoxide

Photo-reforming is an environmentally friendly technology for converting organic wastewater into carbon monoxide (CO), a potential energy source and an important industrial material. Achieving efficient photo-reforming of CO production remains a challenge due to the limitation on fast photogenerated carrier recombination. Here, the TiO2/Bi2MoO6 hetero-nanofibers are well-designed to possess unique Janus interface and ingenious hollow structure. The photo-deposition experiments demonstrated that the Janus binary interface can realize the directional migration of interfacial charges and the spatial separation of redox sites. Moreover, the hollow framework allows full exposure of the bicomponent to reactants and provides excellent optical absorption through multiple light scattering inside the tube, as evidenced by theoretical simulations via COMSOL Multiphysics. The photo-reforming yield of CO from 6000 ppm tetracycline hydrochloride (TCH) solution reaches 2.69 μmol∙g−1∙h−1 (corresponding degradation rate of 44.55 % after 5 h), about 1.44-fold superior to that of the TiO2/Bi2MoO6 core-shell hetero-nanofibers. 13C isotope tracing experiments showed that the efficiency of CO production in the photocatalytic TCH oxidation process is superior to that in carbon dioxide reduction process. Furthermore, when oxygen was introduced into the photocatalytic system, the photo-reforming CO yield from the TCH solution was significantly increased to 60.45 μmol∙g−1∙h−1, which was 22.47 and 5.12 times higher than in carbon dioxide and air atmosphere, respectively. This work provides a promising interfacial engineering to design efficient photo-reforming catalysts for energy production and environmental remediation.

Disconnection units of twinning in body-centered-cubic metals

Twin boundary (TB) migration, facilitated by the motion of disconnections, plays a pivotal role in the deformation of body-centered cubic (BCC) crystals. Comprehending the migration rules of twinning disconnections (TDs) under shear stress is significant in elucidating the role of twin migration in BCC plasticity. Nevertheless, our understanding of the atomic structure and migration mechanics of TDs remains incomplete. In this study, we employ the theory of interfacial defects and molecular dynamics (MD) simulations to thoroughly investigate potential {112}[111] TDs in BCC tantalum (Ta). These TDs are characterized by their Burgers vectors, which were predicted through related dichromatic pattern analysis. We reveal that single-layer and double-layer TDs represent the fundamental building blocks (units) of multi-layer TDs. Their migration directions are entirely opposite under the same shear loading, and they cannot annihilate each other when they migrate “face to face”. Furthermore, these migration rules governing single-layer and double-layer TDs offer a comprehensive explanation for the complex composition and decomposition patterns observed among various multi-layer TDs. What's more, we demonstrated that TDs with zero Burgers vector can only be driven as a whole under coupled loading conditions. These findings significantly enhance our understanding of TB migrations in BCC metals.

Boosting photocatalytic multi-VOCs decontamination over COF-based heterojunction via targeted construction of Ov–M–N charge channel (M = Ti, Zn, W, Ce) and –NH2 functionalization

Covalent organic frameworks (COF) based materials have exhibited excellent gas and visible light absorption capability, yet are very difficult to generate strong oxidative species for photocatalytic mineralization of volatile organic compounds (VOCs). Here, a facile in situ modulation protocol developed could enable the growth of MOx (M = Ti, Zn, W, Ce) with oxygen vacancy (Ov) on –NH2-functionalized COF surfaces to construct NH2–COF/Ov–MOx Z–scheme heterojunctions of excellent stability and efficiency (98.3 %) in photo-oxidation of formaldehyde, acetaldehyde, and acetone. The –NH2 functionalization enhanced VOC chemisorption via H-bond interaction. Moreover, the constructed fast charge transfer channel (Ov–M–N) at the interface not only promoted directional migration of photo-excited carrier, activated adsorbed O2 and H2O to quickly generate strong •OH, but also effectively inhibited injurant formation to realize the precise control of the conversion path. These findings offer new insights into customizing the interfacial structure of COF for indoor air purification.

Effects of normal strain on pyramidal I and II 〈c + a〉 screw dislocation mobility and structure in single-crystal magnesium

Abstract In this study, atomistic simulations were used to analyze the effects of nonglide stress and temperature on the mobility and structure of pyramidal-I (Pyr-I) and pyramidal-II (Pyr-II) 〈c + a〉 screw dislocations in single-crystal Mg. At a very low temperature (10 K), the pyramidal screw dislocations stably exist on Pyr-II planes and tend to glide on Pyr-I planes. The critical resolved shear stresses (CRSSes) of the pyramidal screw dislocations depend on the migration direction. Once a Pyr-II dislocation is transformed into a stuck core, a very high shear stress (243 and 391 MPa) is required to escape from the immobilized structure. Furthermore, their CRSSes increase with increasing compressive strain and decrease with increasing tensile strain normal to the slip planes. At the intermediate temperature range of 200 K ≤ T ≤ 400 K, the CRSSes of Pyr-I screw dislocations are weakly affected, whereas those of Pyr-II screw dislocations drastically decrease. Thus, both Pyr-I and Pyr-II screw dislocations have similar CRSS values at 400 K. At a higher temperature (500 K), Pyr-I screw dislocations frequently emit basal- 〈 a 〉 \langle a\rangle dislocation loops, and the remained dislocations are momentarily immobilized. The basal- 〈 a 〉 \langle a\rangle dislocation loops emitted from the 〈c + a〉 dislocations are quickly retracted, and the core structure is recovered as the shear deformation continues. This phenomenon can reduce the mobility of Pyr-I 〈c + a〉 screw dislocations at a higher temperature. The emission of basal- 〈 a 〉 \langle a\rangle dislocation loops is enhanced under compression.

Insight into mechanism for remarkable photocatalytic hydrogen evolution of Cu/Pr dual atom co-modified TiO2.

The development of high-activity photocatalysts is crucial for the current large-scale development of photocatalytic hydrogen applications. Herein, we have developed a strategy to significantly enhance the hydrogen photocatalytic activity of Cu/Pr di-atom co-modified TiO2 architectures by selectively anchoring Cu single atoms on the oxygen vacancies of the TiO2 surface and replacing a trace of Ti atoms in the bulk with rare earth Pr atoms. Calculation results demonstrated that the synergistic effect between Cu single atoms and Pr atoms regulates the electronic structure of Cu/Pr-TiO2, thus promoting the separation of photogenerated carriers and their directional migration to Cu single atoms for the photocatalytic reaction. Furthermore, the d-band center of Cu/Pr-TiO2, which is located at -4.70 eV, optimizes the adsorption and desorption behavior of H*. Compared to TiO2, Pr-TiO2, and Cu/TiO2, Cu/Pr-TiO2 displays the best H* adsorption Gibbs free energy (-0.047 eV). Furthermore, experimental results confirmed that the photogenerated carrier lifetime of Cu/Pr-TiO2 is not only the longest (2.45 ns), but its hydrogen production rate (34.90 mmol g-1 h-1) also significantly surpasses those of Cu/TiO2 (13.39 mmol g-1 h-1) and Pr-TiO2 (0.89 mmol g-1 h-1). These findings open up a novel atomic perspective for the development of optimal hydrogen activity in dual-atom-modified TiO2 photocatalysts.

Deep tectonics and oil and gas prospectives of the kura depression according to geophysical data

According to the sedimentary features, the transfer of the upper, middle and lower case segments of the Kura depression is marked by oil-scientists and researchers. Structure-tectonic signs of these segments are significantly different, and are characterized by favorable conditions for the emergence, migration and gene- ration of hydrocarbons. Emigrate oil and gas products in basins created potential fields in favorable anticlinal structures, oil and gas collectors. Kur-Cabrırrı is the main oil-gas complex plieli-gas complex pliocene sediments in the Lower Kura depression in the Key-Caucasian Mmmatic basin in the Zevabadi Magmathic basin. It is of great importance in terms of monitoring the history of paleostructural development of these complexes, starting the mass generation of oil and gas, to investigate their migration directions, formation and maintenance of oil and gas fields. The official article was dedicated to the results of the complex in recent years in recent years, according to the results of regional geophysical intelligence work carried out by Azerbaijan and foreign companies. Based on a comprehensive analysis of geophysical information on regional profiles, the tectonic structure of Mesozoic-Cenozoic deposits was clarified, the conditions of sedimentation in the basins were assessed, changes in thickness were traced, and new explanations of the geological development of the territory were provided. At the same time, the boundaries of the Mugan monocline with the Jalilabad depression and the Karaja-Gyzylagad uplift zone have been clarified.

Exploration of Curvature and Stiffness Dual-Regulated Breast Cancer Cell Motility by a Motor-Clutch Model and Cell Traction Force Characterization.

The migration of breast cancer cells is the main cause of death and significantly regulated by physical factors of the extracellular matrix (ECM). To be specific, the curvature and stiffness of the ECM were discovered to effectively guide cell migration in velocity and direction. However, it is not clear what the extent of effect is when these dual-physical factors regulate cell migration. Moreover, the mechanobiology mechanism of breast cancer cell migration in the molecular level and analysis of cell traction force (CTF) are also important, but there is a lack of systematic investigation. Therefore, we employed a microfluidic platform to construct hydrogel microspheres with an independently adjustable curvature and stiffness as a three-dimensional substrate for breast cancer cell migration. We found that the cell migration velocity was negatively correlated to curvature and positively correlated to stiffness. In addition, curvature was investigated to influence the focal adhesion expression as well as the assignment of F-actin at the molecular level. Further, with the help of a motor-clutch mathematical model and hydrogel microsphere stress sensors, it was concluded that cells perceived physical factors (curvature and stiffness) to cause changes in CTF, which ultimately regulated cell motility. In summary, we employed a theoretical model (motor-clutch) and experimental strategy (stress sensors) to understand the mechanism of curvature and stiffness regulating breast cancer cell motility. These results provide evidence of force driven cancer cell migration by ECM physical factors and explain the mechanism from the perspective of mechanobiology.

Detecting Nanotopography Induced Changes in Cell Migration Directions Using Oxygen Sensors.

This study investigates the oxygen (O2) consumption of single cells during changes in their migration direction. This is the first integration of nanotopographies with an O2 biosensor in a platform, allowing the real-time monitoring of O2 consumption in cells and the ability to distinguish cells migrating in the same direction from those migrating in the opposite direction. Advanced nanofabrication technologies were used to pattern nanoholes or nanopillars on grating ridges, and their effects were evaluated using fluorescence microscopy, cell migration assays, and O2 consumption analysis. The results revealed that cells on the nanopillars over grating ridges exhibited an enhanced migration motility and more frequent directional changes. Additionally, these cells showed an increased number of protrusions and filopodia with denser F-actin areas and an increased number of dotted F-actin structures around the nanopillars. Dynamic metabolic responses were also evident, as indicated by the fluorescence intensity peaks of platinum octaethylporphyrin ketone dye, reflecting an increased O2 consumption and higher mitochondria activities, due to the higher energy required in response to directional changes. The study emphasizes the complex interplay between O2 consumption and cell migration directional changes, providing insights into biomaterial science and regenerative medicine. It suggests innovative designs for biomaterials that guide cell migration and metabolism, advocating nanoengineered platforms to harness the intricate relationships between cells and their microenvironments for therapeutic applications.

Ultrahigh-mobility microbial cytochrome nanowires generate power from humidity.

Mixed electronic-ionic conductors are crucial for various technologies, including harvesting power from humidity in a durable, self-sustainable, manner unrestricted by location or environment1,2. Biological proteins have been proposed as mixed conductors for 50 years3,4. Recently, Geobacter sulfurreducens pili filaments have been claimed to act as nanowires to generate power5,6. Here, we show that the power is generated by G. sulfurreducens-produced cytochrome OmcZ nanowires that show 20,000-fold higher electron conductivity than pili7. Remarkably, nanowires show ultrahigh electron and proton mobility (>0.25 cm2/Vs), owing to directional charge migration through seamlessly-stacked hemes and a charged, hydrogen-bonding surface, respectively. AC impedance spectroscopy and DC conductivity measurements using four-probe van der Pauw and back-gated field-effect-transistor devices reveal that humidity increases carrier mobility by 30,000-fold. Cooling halves the activation energy, thereby accelerating charge transport. Electrochemical measurements identify the voltage and mobilities required to switch pure electronic conduction to mixed conduction for power generation. The high aspect ratio (1:1000) and hydrophilic nanowire surface captures moisture efficiently to reduce oxygen reversibly, generating large potentials (>0.5 V) necessary to sustain high power. Our studies establish a new class of biologically-synthesized, low-cost and high-performance mixed-conductors and identify key design principles for improving power output using highly-tunable electronic and protein structures.

Fe(Ⅲ)-doped ZnIn2S4-modified graphene oxide in-situ for the degradation of tetracycline hydrochloride in simulated sunlight

To improve the efficiency of photocatalytic reactions, it is important to understand how to achieve fast directional migration and separation of photogenerated carriers at the interface. Here, Fe(III)-doped ZnIn2S4 (ZIS)-coated graphene oxide (GO) composite (GZF) was in-situ prepared via the low-temperature water bath method. Ultrathin Fe(III)-doped ZIS nanosheets were uniformly grown upright on the GO surface. The prepared samples were studied via, such as, X-ray diffraction, scanning electron microscopy combined with energy-dispersive spectroscopy, transmission electron microscopy, ultraviolet spectroscopy, N2 adsorption–desorption measurements, X-ray photoelectron spectroscopy, and electron spin resonance. Compared with ZnIn2S4 (ZIS)-coated graphene oxide (GZ), the GZF exhibit a 2.26-fold increase in the photocatalytic degradation performance of tetracycline hydrochloride (TCH) in simulated sunlight. Through density functional theory calculations, found that Fe(III) doping introduces new energy levels into ZIS, which effectively narrow its bandgap and thus enhance its light absorption efficiency. It was found that h+, ·O2−, and 1O2 were the major reactive oxygen species involved in the photocatalysis, and the effect of pH on the catalytic degradation of TCH was examined. Electron spin resonance and density functional theory results indicate that Fe(III) acts as an electron trap in the ZIS structure to promote the separation of photogenerated electron-hole pairs, which in turn enhances the photocatalytic efficiency of GZF-25.

Operando X-Ray Fluorescence Analysis of Dynamic Cerium Radical Quencher Motion Perpendicular to MEA

Polymer electrolyte fuel cells (PEFCs) are required to have a durability of over 50,000 hours. One of the degradation factors is chemical degradation of perfluorosulfonic acid (PFSA) electrolyte membrane. The reaction of hydrogen peroxide with iron impurities produces hydroxyl radicals that break the chemical bonds in the PFSA membrane. Cerium ions are added to electrolyte membranes to absorb these radicals and act as a radical quencher, contributing to improved membrane durability.1 However, cerium ions have been shown to move in both the planar and through-plane directions under fuel cell operating conditions.2,3 The spatial scale of migration in the membrane planar direction is large, and therefore the time scale is also large, where analysis of end-of-life samples has been reported. On the other hand, the observation of the movement in the membrane direction is not easy because the thickness of the electrolyte membrane is 10 micrometers, and it is estimated to be significantly different between the post-disassembly condition and the operating condition. Therefore, it is necessary to establish operando measurement technique for cerium ion concentration with high spatial and temporal resolution in the direction perpendicular to the membrane. We developed an operando X-ray fluorescence spectroscopy technique using a combination of high-energy X-rays and a focused microbeam, and analyzed the behavior of cerium concentration change under current-applied conditions.4 The distribution behavior of cerium ions in the membrane is significantly different depending on the current and humidity. In a high-humidity environment, the ions move in the membrane in the vertical direction in about 1 second. Therefore, in this study, we developed a method to continuously measure the cerium ion concentration in the membrane on a sub-second scale and were able to estimate the effective cerium diffusion coefficient. It was also found that cerium ions migrate to the cathode layer under current-applied conditions. This behavior is accelerated in low humidity environments. This is because the diffusion coefficient of cerium ions is smaller at lower humidity and the back-diffusion flux is smaller.This work is based on results obtained from the project commissioned by the New Energy and Industrial Technology Development Organization (NEDO) of Japan.[1] E. Endoh, ECS Trans., 16, 1229–1240 (2008).[2] Y. Lai, K. M. Rahmoeller, J. H. Hurst, R. S. Kukreja, M. Atwan, A. J. Maslyn,C. S. Gittleman, J. Electrochem. Soc., 165, F3217-F3229(2018).[3] S.M. Stewart, D. Spernjak, R. Borup, A. Datye, F. Garzon, ECS Electrochem. Lett., 3, F19-F22 (2014).[4] Y. Orikasa, A. Takezawa, K. Amemiya, Y. Tsuji, T. Asaoka, M. Ohki, O. Sekizawa, K. Nitta, ECS Trans., 109 109 (2022).

Gut-derived memory γδ T17 cells exacerbate sepsis-induced acute lung injury in mice

Sepsis is a critical global health concern linked to high mortality rates, often due to acute lung injury (ALI)/acute respiratory distress syndrome (ARDS). While the gut-lung axis involvement in ALI is recognized, direct migration of gut immune cells to the lung remains unclear. Our study reveals sepsis-induced migration of γδ T17 cells from the small intestine to the lung, triggering an IL-17A-dominated inflammatory response in mice. Wnt signaling activation in alveolar macrophages drives CCL1 upregulation, facilitating γδ T17 cell migration. CD44+ Ly6C– IL-7Rhigh CD8low cells are the primary migratory subtype exacerbating ALI. Esketamine attenuates ALI by inhibiting pulmonary Wnt/β-catenin signaling-mediated migration. This work underscores the pivotal role of direct gut-to-lung memory γδ T17 cell migration in septic ALI and clarifies the importance of localized IL-17A elevation in the lung.

How many moves are too many? Repeat internal migration and subjective well‐being in young adulthood in Australia

AbstractDespite growing calls to analyse internal migration as a life‐course trajectory, most studies use the last recorded migration based on a dichotomy between migrants and non‐migrants. Leveraging the maturation of longitudinal surveys and methodological advances, this paper establishes the diversity and complexity of individual migration trajectories and their long‐term association with subjective well‐being. We apply sequence and cluster analysis to the Household, Income and Labour Dynamics in Australia (HILDA) survey data to establish the migration trajectories of millennials from the ages of 15–18 to 27–30 based on the timing, frequency, and direction of migration between regions. We then combine data mining techniques, machine learning algorithms and regression analysis to explore the association between internal migration trajectories and economic and social subjective well‐being (SWB). We find that a full third of young adults are repeat migrants split between return migrants, serial onward migrants, and circular migrants. Repeat migrants often exhibit lower levels of life satisfaction. Successive migrations cumulatively shape life satisfaction, as shown by a negative association between serial onward migration and social SWB. Additionally, return migrants are less satisfied with their economic outcomes, particularly when return migration occurs after two consecutive onward migrations or when return migration occurs early in adulthood. Collectively, these results reveal heterogeneity in migration trajectories that are missed when migration is treated as a one‐off event while suggesting that internal migrants operate a trade‐off between social and economic outcomes over the life course.

In situ DRIFTs-based comprehensive reaction mechanism of photo-thermal synergetic catalysis for dry reforming of methane over Ru-CeO2 catalyst

Solar-driven photo-thermal dry reforming of methane (DRM) is an environmentally friendly production route for high-value-added chemicals. However, the lack of thorough understanding of the mechanism for photo-thermal reaction has limited its further development. Here, we systematically investigated the mechanism of photo-thermal DRM reaction with the representative of Ru/CeO2 catalyst. Through in situ DRIFTs and transient experiments, comprehensive investigation into the reaction steps and their reactive sites in the process of DRM reaction were conducted. Besides, the excitation and migration direction of photo-electron was determined by ISI-XPS experiments, and the change of surface defect structure induced by light was characterized by ISI-EPR experiments. Based on the above results, the photo-enhancement effect on each micro-reaction step was determined. This study provides a theoretical basis for the industrialization of photo-thermal DRM reaction and its development of catalysts.

A photoelectrochemical sensor based on In2S3/AgInS2 in situ Z-type heterojunction with “photo-modulated interface charge” for sensitive detection of Programmed Death-Ligand 1

The construction of heterostructure photoelectrodes can enhance the performance of photoelectrochemical (PEC) sensors. However, it is still a critical challenge to achieve efficient transfer of interface carriers. In this paper, we propose a strategy of “photo-modulated interface charge” to design a PEC sensor based on a hollow hexagonal tubular In2S3/AgInS2 in situ Z-type heterojunction for the susceptible detection of Programmed Death-ligand 1 (PD-L1). The hollow structured In2S3/AgInS2 is ingeniously synthesized employing indium-sourced MIL-68 as a sacrificial template and in situ cation exchange technique. This composite material has close contact interfaces due to in situ growth, which facilitates the spontaneous establishment of a robust and stable built-in electric field between the interfaces. Moreover, the inner cavity structure promotes multiple light refractions and scatterings, significantly enhancing light trapping capability. Under the influence of both light irradiation and electric field force, the migration direction of the interfacial charge is reversed, forming a Z-transfer path, which effectively delays the compounding of the electron-hole pairs (e-/h+) and further improves the sensitivity of the sensor. The minimum detection threshold of the PEC sensor is 26.58 fg/mL, and the feasibility of real samples is investigated, providing new insights for early diagnosis and prognostic treatment of diseases.

Regulating Local Electron Density of Cyano Sites in Graphitic Nitride Carbon by Giant Internal Electric Field for Efficient CO2 Photoreduction to Hydrocarbons.

Selective photocatalytic CO2 reduction to high-value hydrocarbons using graphitic carbon nitride (g-C3N4) polymer holds great practical significance. Herein, the cyano-functionalized g-C3N4 (CN-g-C3N4) with a high local electron density site is successfully constructed for selective CO2 photoreduction to CH4 and C2H4. Wherein the potent electron-withdrawing cyano group induces a giant internal electric field in CN-g-C3N4, significantly boosting the directional migration of photogenerated electrons and concentrating them nearby. Thereby, a high local electron density site around its cyano group is created. Moreover, this structure can also effectively promote the adsorption and activation of CO2 while firmly anchoring *CO intermediates, facilitating their subsequent hydrogenation and coupling reactions. Consequently, using H2O as a reducing agent, CN-g-C3N4 achieves efficient and selective photocatalytic CO2 reduction to CH4 and C2H4 activity, with maximum rates of 6.64 and 1.35µmol g-1h-1, respectively, 69.3 and 53.8 times higher than bulk g-C3N4 and g-C3N4 nanosheets. In short, this work illustrates the importance of constructing a reduction site with high local electron density for efficient and selective CO2 photoreduction to hydrocarbons.