Preparation Of Microspheres Research Articles

Development of puerarin-loaded poly(lactic acid) microspheres for sustained ocular delivery: In vitro/vivo evaluation

Diabetic retinopathy, an ocular complication of diabetes, is an important cause of blindness in adults. Puerarin is considered to have promising potential for clinical use in treating diabetic retinopathy. In this study, we designed a novel puerarin-loaded poly(lactic acid) sustained-release microspheres suitable for ocular administration, and we assessed itsin vitro and in vivo properties. The preparation of puerarin-loaded microspheres was optimized by Box-Behnken response surface design. The encapsulation efficiency and drug loading of microspheres were 35.71% and 3.85%, respectively. The microspheres exhibited good dispersion and high safety, making it suitable for ocular drug delivery. In vitro release demonstrated that microspheres had a well-sustained release effectiveness, and its release behavior complied with the zero-order kinetic characteristics. The results of ocular tissue distribution revealed that the CmaxandAUC0-∞ of the microspheres group in the retina and choroid were considerably higher than those of the solution group and the intravenous injection group. This research revealed that intravitreal injection of microspheres can significantly prolong the half-life of puerarin in eye tissues and achieve sustained drug release. Therefore, intravitreal injection of microspheres has positive implications for the treatment of diabetic retinopathy.

Controllable preparation of hexanitrostilbene (HNS) microspheres with multi-cavity structure to enhance safety and combustion performance

Controlling the structure to meet the demand for high-energy, low-sensitivity energetic materials in modern military and civilian applications is an effective method. In this study, hexanitrostilbene (HNS) microspheres with a multi-cavity structure were prepared using nitrocellulose (NC) and fluororubber (F2604) as binders via microjet droplet technology. The effects of flow rate, receiving liquid temperature, and suspension concentration on the morphology, particle size, and cavity of the HNS microspheres were investigated. Furthermore, the impact of the multi-cavity structure on the microspheres' specific surface area, dispersibility, thermal properties, safety performance, and combustion performance was studied. Results showed that the multi-cavity HNS microspheres retained the raw materials' crystal structure while exhibiting improved dispersibility, higher activation energy, and shorter ignition delay. Moreover, the multi-cavity structure outperformed the solid structure in terms of specific surface area, safety performance, and combustion performance. This study opens up a new direction for the preparation of multi-structured energetic microspheres.

Preparation of ternary hybridized chitosan microspheres with photothermal effect for pH-sensitive long-lasting controlled release system and its release mechanism

To enhance the effective utilization of drugs and diminish the number of medications for patients, it is vital to investigate controlled long-acting drug release systems and their release mechanisms. In this study, chitosan microspheres were synthesized by cross-linking pH-sensitive Schiff bases, and Zif-8, a pH-sensitive component, was encapsulated within them. Furthermore, MXene was incorporated as a third component to augment the strength and photothermal synergistic characteristics of the microspheres. By adjusting the ratio of each component, the optimal ternary heterogeneous functional pH-controllable long-lasting drug release system was obtained. The optimal coating and the most effective adsorption-release effect were achieved. The release mechanism was examined under varying pH and temperature conditions. The release process was found to be divided into three stages. The initial phase was predominantly governed by the Fick diffusion mechanism, whereas the subsequent phases were primarily regulated by the pH-induced co-decomposition of CS and Zif-8, and the individual decomposition of CS, respectively.The drug was observed to be released in a linear manner during the latter two stages of the experiment. This was evidenced by the persistent release of ciprofloxacin hydrochloride in response to pH changes, and further supported by the results of tests on its antimicrobial properties. The drug release persisted for over three days at pH 5.4 and could be utilized repeatedly, exhibiting promising applications in drug delivery. Moreover, the drug's photothermal properties offer the possibility of developing synergistic therapeutic programs.

High-Yield Preparation and Properties of Phenolic Resin-Based Carbon Microspheres.

This study aims to enhance the production efficiency of carbon microspheres (CS) and expand their potential applications. To this end, resorcinol-formaldehyde microspheres (RFS) were prepared in high yield through the modified Stöber method, utilizing resorcinol and formaldehyde as carbon sources, ammonia as a catalyst, and sodium dodecyl benzenesulfonate (SDBS) as a soft template. The resulting RFS were then carbonized to obtain high yield CS. This study examined the impact of key factors, namely, the concentration of resorcinol, ammonia, and the SDBS concentration, along with the temperature of carbonization, upon the properties of the resulting CS, which were observed with regard to microscopic morphology, average particle size, homogeneity, and yield. The findings demonstrated that the proclivity of RFS to agglomerate with one another at high carbon source concentrations was markedly diminished, while the yield of CS was notably enhanced through the introduction of the anionic surfactant SDBS. The particle size of RFS can be modified within the range 200-1000 nm by adjusting the resorcinol and ammonia concentration. The prepared RFS exhibited a regular spherical morphology and a smooth surface. Furthermore, the CS displayed a uniform spherical morphology following high-temperature carbonization, with no agglomeration or cross-linking observed between adjacent particles. It was observed that the yield of RFS reached a maximum of 93.2 g/L when the resorcinol concentration was 0.7 mol/L. Following carbonization at 800 °C, the yield of CS was found to be 41.9 g/L, with a diameter of 770 nm and good monodispersity.

Facile Preparation of Raspberry-Like SiO2@Polyurea Microspheres with Tunable Wettability and Their Application for Oil-Water Separation.

Raspberry-like microspheres have been widely used as superhydrophobic materials, photonic crystals, drug carriers, etc. Nevertheless, their preparation methods, usually consisting of multiple steps, are generally time- and energy-consuming. Herein raspberry-like SiO2@polyurea microspheres (SiO2@PUM) are readily prepared via a one-step precipitation polymerization of isophorone diisocyanate in a H2O/acetone mixture with the presence of SiO2 particles. The sphere size, surface roughness, and SiO2 content of SiO2@PUM are easily adjustable by varying the experimental conditions. TEM and SEM observations reveal that the final SiO2@PUM exhibits a core-shell structure, with polyurea (PU) in the core and SiO2 particles as the shell. In the process, the SiO2 particles were initially located on the PUM surface as a monolayer. With the reaction proceeding, the monolayer of SiO2 particles became thicker, forming a thicker layer of SiO2 particles on PUM due to the accumulation of SiO2 particles, leading to a multilayer structure of SiO2 particles on the shell of SiO2@PUM. The formation mechanism of the raspberry-like SiO2@PUM was thoroughly discussed and ascribed to electrostatic attraction between the positively charged PU and negatively charged SiO2 particles. Once dried, SiO2@PUM was superhydrophobic and turned hydrophilic if water-wetted. Using a layer of SiO2@PUM, effective separation with good reusability for a variety of oil-water mixtures was achieved regardless of the oil density and types of oil-water emulsions. This work presents a novel protocol for the preparation of raspberry-like microspheres with tunable wettability via a rapid and green process, and the resulting microspheres are highly effective for the separation of diverse types of oil-water mixtures.

Preparation and in vitro/in vivo evaluation of uniform-sized Goserelin-loaded sustained release microspheres

Sustained release microspheres loaded with goserelin are regarded as a promising candidate for treating prostate cancer and other sex hormone diseases. However, their widespread adoption has been hindered by issues such as wide particle size distribution and unstable release characteristics. To address these challenges, we employed a combination of the solid-in-oil-in-water microspheres preparation approach (S/O/W) and innovative premix membrane emulsification technology and deeply investigated the effects of four key parameters on the loaded performance of microspheres and the microscopic mechanisms behind them. With this approach, we successfully produced goserelin-loaded sustained release microspheres of narrow particle size distribution (Span 0.642), remarkable encapsulation efficiency (DL = 4.23 %, EE = 93.98 %), low initial burst release (about 0.50 % within 2 h), and compatibility with small injection needles (23-G, inner diameter 0.33 mm, outer diameter 0.64 mm, maximal force 59 N). In the animal model(administered dose, 2.4 mg·Kg−1), goserelin long-acting sustained release microspheres sustained release for over 32 days, maintaining effective concentrations above 2 ng·mL−1, and effectively reduced serum testosterone concentrations to castration levels (<1.0 ng·mL−1) by day 4, maintaining this inhibition for up to 21 days, exhibiting comparable efficacy to the positive control group. In vivo release kinetics analysis revealed that goserelin-loaded sustained release microspheres exhibited a release pattern dominated by diffusion with corrosion assistance in vivo. In summary, the systematic and comprehensive evaluation of uniform-sized goserelin-loaded sustained release microspheres has highlighted their excellent translational potential, and the study herein may provide new strategies and ideas for the development of microsphere dosage forms.

Preparation and evaluation of sustained release microspheres for the treatment of diabetic neuropathy

This study aimed to prepare and evaluate sustained release microspheres for the treatment of diabetic neuropathy using Various polymers including sodium alginate, ethyl cellulose, HPMC K100, Carbopol 934, and Eudragit L-100-55. Polymers were employed to assess their impact on several crucial parameter’s entrapment efficiency, production yield Particle size analysis, swelling index, in vitro dissolution, and release kinetics. The production yield of microspheres varied depending on the polymer used, with some polymers performing in advanced yields. Entrapment effectiveness was set up to be optimal with certain polymer combinations. Particle size analysis indicated that the microspheres were within the asked range for controlled release operations. The swelling index showed polymer-dependent lump actions. In vitro dissolution studies demonstrated sustained medicine release over time, with different polymers impacting both the release rate and profile. medicine release kinetics analysis revealed that the release followed specific models, reflecting the commerce between the microsphere matrix and the medicine.

Carbon-ash separation of coal gasification fine slag by flocculation-flotation process

ABSTRACT Coal gasification slag (CGFS), which was a bulk solid waste in coal chemical industry, shows great application potential in the preparation of silica microspheres, zeolites ceramic materials, etc. However, its high residual carbon characteristics hinder to its development. Decarburization is a necessary precondition for the effective utilization of CGFS. The efficient separation of carbon or ash from CGFS remains a challenge due to its ultra-fine particle size. This work provides a novel flocculation-flotation process to achieve the complete carbon-ash separation of CGFS. The addition of anionic polyacrylamide (APAM) or polyethylene oxide (PEO) had positive effect on the flotation of CGFS, especially for APAM. With APAM dosage of 50 g/t, the ash content of carbon slag and ash slag were 59.04% and 97.11%, respectively. In this process, the zeta potential of carbon slag and ash slag decreased from −17.43 and −11.77 mV to −23.45 and −29.80 mV, respectively. The greater change of zeta potential of ash slag indicates its stronger adsorption of APAM, leading to the higher flocculation trend of ash particles than that of carbon slag. APAM has selective flocculation effect on ash slag, which contributed to reduce the mechanical entrainment during flotation, thereby achieving complete carbon-ash separation of CGFS.

Preparation and release pattern study of long-term controlled release Blonanserin microspheres

To prepare a PLGA microsphere loaded with the antipsychotic Blonanserin without release leg period and released in a near-zero model for long time, in this study, 15 kDa and 75 kDa PLGA were chosen to be mixed with different ratios, and Blonanserin microspheres (Bn-MS) without significant differences in the particle size, drug loading capacity, and encapsulation rate were prepared by microfluidics. The release kinetic model was fitted to the release behavior by monitoring the changes in particle size and morphology during the Bn-MS release to investigate microspheres’ in vitro release pattern. The results showed that the addition of appropriate ratios of mixed molecular weights to Bn-MS could eliminate the release hysteresis period. When the ratio of 15 kDa and 75 kDa was 1:9 (F3), the Bn-MS had a low burst release rate, moderate release rate, no release hysteresis period, a long release period of up to 35 days, and a stable release pattern close to the zero level. The results of the release mechanism study indicated that the hybrid PLGA improved the release behavior of the microspheres by adjusting the dissolution degradation rate of Bn-MS, which in turn affected the release mechanism of the microspheres.

Preparation of microstructure controllable CL-20/FOX-7 composite microspheres by microchannel recrystallization technology to enhance safety and combustion performance

Realizing the balance between high energy density and multifunctionality of energetic materials is a hot spot in current research, and its study is of great significance for the application of energetic materials. Regulating microstructure is widely recognized as an effective strategy for solving such problems. In this paper, four different microstructures of Hexanitrohexaazaisowurtzitane(CL-20)/1,1-diamino-2,2-dinitroethylene(FOX-7) composite microspheres, namely, hollow, porous irregular microspheres, porous microspheres, and layered porous microspheres, were prepared by microchannel recrystallization technology. The effects of crystal precipitation rate, binder mechanical properties, and purity of water phase on the microstructure of composite microspheres were systematically investigated. The four prepared samples were spherical particles with regular morphology and uniform particle size. The angle of repose and mechanical sensitivity tests showed that the CL-20/FOX-7 composite microspheres had good dispersibility and mechanical sensitivity. Ignition experiments show that hollow microspheres have the best energy release efficiency, while porous microspheres have higher energy density and more stable energy release efficiency. The results show that the combustion performance and safety of the composite microspheres can be effectively enhanced by adjusting the microstructure. Microchannel recrystallization technology can realize the controllable preparation of the microstructure of composite microspheres, which provides a reference for the design and preparation of other composite microspheres.

Chemical-free fabrication of silk fibroin microspheres with silk I structure

Silk fibroin (SF) microspheres show bright prospects for biomedical applications, such as microcarriers, drug delivery, tumor embolization agents, and microscaffolds. However, the chemistry-independent preparation of SF microspheres, which is critical to biomedical applications, has been challenging. In this study, the SF microspheres with silk I crystal type were generated by using electrostatic spraying and freezing-induced assembly. The SF solution was sprayed into liquid nitrogen to form frozen microspheres with tunable size. Annealing can crystallize frozen SF to form silk I crystal type, providing a green approach to harvest water-insoluble microspheres. The SF microspheres can retain a monolithic shape in water for up to 30 days, while having a 77 % degradation ratio in PBS in 14 days, showing high stability in water and rapid degradation under physiological conditions. The biomedical application prospects of the silk I microspheres were demonstrated by cell culture and small molecule drugs (doxorubicin). The microspheres can support the growth and expansion of mammalian cells, and provide a sustainable release for DOX with 10 days. This strategy offers a green approach that avoids the use of organic solvents and cross-linkers for designing SF microsphere biomaterials.

Preparation of nitrocellulose microspheres based on low-cost high-throughput microfluidic technology

Preparation of nitrocellulose microspheres based on low-cost high-throughput microfluidic technology

Preparation of Block Copolymer-Stabilized Microspheres from Commercial Plastics and Their Use as Microplastic Proxies in Degradation Studies.

This study presents a novel one-pot procedure for preparing sub-10 μm poly(ethylene glycol) (MPEG)-stabilized glycol-modified poly(ethylene terephthalate), poly(ethylene terephthalate) (PET), poly(lactic acid) (PLA), polycarbonate, and polycaprolactone (PCL) particles from commercial plastics. The prepared particles can be dried and directly resuspended in water, making them easy to handle and relevant mimics of microplastics. In addition, the method was extended to the preparation of unstabilized PET particles and somewhat larger polyethylene (PE)-based particles. Selected stabilized microparticles were subjected to aerobic biodegradation studies and compared with nonstabilized PET particles. All of the particles exhibited some degradation. For PLA and PET particles, the degradation corresponded well to the amount of surface-stabilizing MPEG groups or known impurities, confirming that these polymers do not degrade under the applied conditions but that the stabilizing groups do. PCL particles degraded relatively rapidly, which is consistent with the literature data and their relatively small size. PE-based particles degraded more than expected if only degradation of the stabilizing groups was taken into account, indicating that the surface chemistry of these particles plays a role in bulk degradation.

Design and preparation of hydrogel microspheres for spinal cord injury repair.

A severe disorder known as spinal cord damage causes both motor and sensory impairment in the limbs, significantly reducing the patients' quality of life. After a spinal cord injury, functional recovery and therapy have emerged as critical concerns. Hydrogel microspheres have garnered a lot of interest lately because of their enormous promise in the field of spinal cord injury rehabilitation. The material classification of hydrogel microspheres (natural and synthetic macromolecule polymers) and their synthesis methods are examined in this work. This work also covers the introduction of several kinds of hydrogel microspheres and their use as carriers in the realm of treating spinal cord injuries. Lastly, the study reviews the future prospects for hydrogel microspheres and highlights their limitations and problems. This paper can offer feasible ideas for researchers to advance the application of hydrogel microspheres in the field of spinal cord injury.

Preparation and Characterization of Responsive Cellulose-Based Gel Microspheres for Enhanced Oil Recovery.

As an important means to enhance oil recovery, ternary composite flooding (ASP flooding for short) technology has achieved remarkable results in Daqing Oilfield. Alkalis, surfactants and polymers are mixed in specific proportions and injected into the reservoir to give full play to the synergistic effect of each component, which can effectively enhance the fluidity of crude oil and greatly improve the oil recovery. At present, the technology for further improving oil recovery after ternary composite flooding is not mature and belongs to the stage of technical exploration. The presence of alkaline substances significantly alters the reservoir's physical properties and causes considerable corrosion to the equipment used in its development. This is detrimental to both the environment and production. Therefore, it is necessary to develop green displacement control agents. In the reservoir environment post-ASP flooding, 2-(methylamino)ethyl methacrylate and glycidyl methacrylate were chosen as monomers to synthesize a polymer responsive to alkali, and then grafted with cellulose nanocrystals to form microspheres of alkali-resistant swelling hydrogel. Cellulose nanocrystals (CNCs) modified with functional groups and other materials were utilized to fabricate hydrogel microspheres. The product's structure was characterized and validated using Fourier transform infrared spectroscopy and X-ray diffraction. The infrared spectrum revealed characteristic absorption peaks of CNCs at 1165 cm-1, 1577 cm-1, 1746 cm-1, and 3342 cm-1. The diffraction spectrum corroborated the findings of the infrared analysis, indicating that the functional modification occurred on the CNC surface. After evaluating the swelling and erosion resistance of the hydrogel microspheres under various alkaline conditions, the optimal particle size for compatibility with the target reservoir was determined to be 6 μm. The potential of cellulose-based gel microspheres to enhance oil recovery was assessed through the evaluation of Zeta potential and laboratory physical simulations of oil displacement. The study revealed that the absolute value of the Zeta potential for gel microspheres exceeds 30 in an alkaline environment with pH values ranging from 7 to 14, exhibiting a phenomenon where stronger alkalinity correlates with a greater absolute value of Zeta potential. The dispersion stability spans from good to excellent. The laboratory oil displacement simulation experiment was conducted using a cellulose-based gel microsphere system following weak alkali ASP flooding within the pH value range from 7 to 10. The experimental interventions yielded recovery rates of 2.98%, 3.20%, 3.31%, and 3.38%, respectively. The study indicates that cellulose-based gel microspheres exhibit good adaptability in alkaline reservoirs. This research offers a theoretical foundation and experimental approaches to enhance oil recovery techniques post-ASP flooding.

Sustained-Release Microspheres of Cyclodextrin-Resveratrol Complex Using Fenugreek Galactomannan Hydrogels: A Green Approach to Phytonutrient Delivery.

Food matrices are becoming increasingly complex with the impregnation of phytonutrients with health-beneficial pharmacological effects. Herein, we report the preparation, characterization, and functional application of soluble and stable microspheres of trans-resveratrol (t-RES) developed through a water-based green process involving cyclodextrin (CD) and fenugreek galactomannan (FG). Spectroscopic and thermodynamic calculations identified γ-CD as the best CD to form a stable cyclodextrin-resveratrol inclusion complex (CD-R, 49-fold enhanced solubility); however, it exhibited a burst release profile. The sustained release of resveratrol was achieved by further encapsulating the inclusion complex within the fenugreek galactomannan hydrogel scaffold by a gel-phase dispersion process, resulting in an amorphous powder (FG-CD-R) as evident from powder X-ray diffraction (PXRD), differential scanning calorimetry (DSC), and scanning electron microscopy (SEM) studies. Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance (NMR) studies confirmed the formation of the inclusion complex with no chemical alterations. When dissolved in water, FG-CD-R swelled and released stable cuboid structures with an average particle size of 500 ± 53 nm with a zeta potential of -52 ± 5.3 mV. FG-CD-R demonstrated a sustained-release profile upon in vitro release studies. Accelerated study demonstrated its stability for a shelf-life of two years. Further it was shown to be suitable for the preparation of transparent gummies with improved sensory attributes compared to unformulated t-RES. In summary, FG-CD-R is simple to prepare and easily scalable, providing a sustained-release t-RES with a natural, food-grade, and clean label status (non-genetically modified, allergen-free, vegan, and free from residual solvents) for nutritional applications.

Chitosan/β-glycerophosphate porous microsphere prepared by facile water-in-water emulsion as a topical hemostatic material

Acute hemorrhage is a major cause of death in many emergency cases. Although many hemostatic materials have been studied in recent years, it is still necessary to develop new hemostatic materials with remarkable efficiency, biosafety, convenient preparation, low cost, and good biodegradability. In this work, novel chitosan (CS)/β-glycerophosphate (β-GP) composite porous microsphere with a uniform size of 210.00 ± 2.14 μm was fabricated through water-in-water (W/W) emulsion via microencapsulation, which can avoid the use of toxic crosslink chemicals and organic solvents to achieve facile and efficient preparation of microspheres. β-GP could promote the formation of microspheres by enhancing the hydrogen-bonding interaction between CS chains, which contributed to the macro-porous structure. Owing to their large pore size (6.0 μm) and high specific surface area (37.8 m2/g), the CS/β-GP microspheres could absorb water quickly and adsorb protein, red blood cells, and platelets through electrostatic forces to promote blood coagulation. Furthermore, the CS/β-GP microspheres achieved a significantly shortened hemostatic time (45 s) and reduced blood loss (0.03 g) in a rat liver injury model. Rat tail amputation test also showed a satisfactory hemostatic effect. Overall, the green and porous CS/β-GP microspheres can be used as a facile and topical rapid hemostatic material.

Preparation of yttrium-90 resin microspheres based on SiO2-Fe3O4 nanomaterials and analysis of their biodistribution

This study reports the development and evaluation of yttrium-90 (90Y) radiolabeled silica-coated iron oxide (SiO2-Fe3O4) resin microspheres for potential theranostic application in cancer radiation therapy. Iron oxide nanoparticles of average diameter 29.7 nm were synthesized via optimized co-precipitation and displayed superparamagnetic behavior ideal for MRI. Aminosilane surface functionalization enabled covalent conjugation of 1 mmol/g DTPA/DOTA chelators for labeling 2 mCi 90Y per 150 μg nanoparticles with 92 % efficiency when incubated for 45 mins at pH 5.5 and 50°C. In vitro stability assays in buffers and human serum showed excellent 90Y retention (>95 %) up to 48 hours. In vivo biodistribution in Wistar rats revealed extended nanoparticle circulation half-life of 5.2 hours and peak exposure of 22.4 %ID/g compared to rapid clearance of unconjugated 90Y chloride within 1 hour. Complete renal recovery by 72 hours and minimal bone accumulation (<2 %) proves in vivo stability and biocompatibility of the 90Y-radiolabeled theranostic platform.

Rational Design of Liquid-Liquid Microdispersion Droplet Microreactors for the Controllable Synthesis of Highly Uniform and Monodispersed Dextran Microspheres.

Hydrogel microspheres are biocompatible materials widely used in biological and medical fields. Emulsification and stirring are the commonly used methods to prepare hydrogels. However, the size distribution is considerably wide, the monodispersity and the mechanical intensity are poor, and the stable operation conditions are comparatively narrow to meet some sophisticated applications. In this paper, a T-shaped stepwise microchannel combined with a simple side microchannel structure is developed to explore the liquid-liquid dispersion mechanism, interfacial evolution behavior, satellite droplet formation mechanism and separation, and the eventual successful synthesis of dextran hydrogel microspheres. The effect of the operation parameters on droplet and microsphere size is comprehensively studied. The flow pattern and the stable operation condition range are given, and mathematical prediction models are developed under three different flow regimes for droplet size prediction. Based on the stable operating conditions, a microdroplet-based method combined with UV light curing is developed to synthesize the dextran hydrogel microsphere. The highly uniform and monodispersed dextran microspheres with good mechanical intensity are synthesized in the developed microfluidic platform. The size of the microsphere could be tuned from 50 to 300 μm with a capillary number in the range of 0.006-0.742. This work not only provides a facile method for functional polymeric microsphere preparation but also offers important design guidelines for the development of a robust microreactor.

Microneedle delivery system with rapid dissolution and sustained release of bleomycin for the treatment of hemangiomas

Hemangioma of infancy is the most common vascular tumor during infancy and childhood. Despite the proven efficacy of propranolol treatment, certain patients still encounter resistance or face recurrence. The need for frequent daily medication also poses challenges to patient adherence. Bleomycin (BLM) has demonstrated effectiveness against vascular anomalies, yet its use is limited by dose-related complications. Addressing this, this study proposes a novel approach for treating hemangiomas using BLM-loaded hyaluronic acid (HA)-based microneedle (MN) patches. BLM is encapsulated during the synthesis of polylactic acid (PLA) microspheres (MPs). The successful preparation of PLA MPs and MN patches is confirmed through scanning electron microscopy (SEM) images. The HA microneedles dissolve rapidly upon skin insertion, releasing BLM@PLA MPs. These MPs gradually degrade within 28 days, providing a sustained release of BLM. Comprehensive safety assessments, including cell viability, hemolysis ratio, and intradermal reactions in rabbits, validate the safety of MN patches. The BLM@PLA-MNs exhibit an effective inhibitory efficiency against hemangioma formation in a murine hemangioma model. Of significant importance, RNA-seq analysis reveals that BLM@PLA-MNs exert their inhibitory effect on hemangiomas by regulating the P53 pathway. In summary, BLM@PLA-MNs emerge as a promising clinical candidate for the effective treatment of hemangiomas.Graphical