Formation Of Microspheres Research Articles

Microspheres of stem cells from human exfoliated deciduous teeth exhibit superior pulp regeneration capacity

ObjectivesEngineering spheroids to create three-dimensional (3D) cell cultures has gained increasing attention in recent years due to their potential advantages over traditional two-dimensional (2D) tissue culture methods. Stem cells derived from human exfoliated deciduous teeth (SHEDs) demonstrate significant potential for pulpal regeneration applications. Nevertheless, the feasibility of microsphere formation of SHEDs and its impact on pulpal regeneration remain unclear. MethodsIn this study, SHEDs were isolated, identified, and cultured in ultra-low attachment six-well plates to produce SHED microspheres. The biological properties of SHED microspheres were compared to those of traditional 2D culture using live-dead staining, Alizarin red staining, Oil-red O staining, scratch experiments, Immunofluorescence, Transmission electron microscopy scan, Western blotting, RNA sequencing, and a nude mice subcutaneous transplantation model. ResultsWe found SHED cells can form microspheres with a dense internal structure. SHED microspheres exhibited notable advantages over SHED cells in terms of biological properties, maintaining cell activity and enhancing cell differentiation, migration, and stemness in vitro. RNA-seq revealed that the SHED microspheres potentially influenced cell development, regulation of neurogenesis, skeletal system development, tissue morphogenesis singling pathway. In vivo, SHED microspheres promoted the generation of pulp tissue in dental pulp compared to traditional 2D culture. ConclusionsMicrosphereization of SHED through 3D cell culture enhances its pulp regeneration capacity, presenting a novel strategy for dental pulp regeneration and the clinical treatment of dental pulp diseases.

Exploring the impact of microfluidic chip structure on the efficacy of three-dimensional tumor microspheres cultivation.

Three-dimensional (3D) tumor microspheres can simulate the interaction and growth dynamics of tumor cells, and have been used as a new in vitro model for drug screening and tumor biology related research. The scaffold-free culture of 3D tumor microspheres on microfluidic chips has many advantages, including low cost, high throughput, convenience and flexibility. However, it is still unclear how various factors, such as chip structure, influence the culture effect of tumor microspheres. The lack of standardized evaluation and characterization of the culture effect hinders the further optimization and development of chip function. This study presents numerical simulations of multiple parts or processes of the proposed 3D culture chips with two different structural parameters based on computational fluid dynamics (CFD) methods. An evaluation system for tumor microspheres was established. The prediction of the CFD simulation was consistent with the culture results of the chips, reflecting the important role of the structural parameters of the microtrap in the formation of uniform tumor microspheres. Furthermore, the velocity of cell suspension also had a significant impact on the retention of tumor cells. Additionally, the drug screening results of tumor microspheres indicated that tumor microspheres exhibit greater drug resistance, which may be attributed to their size. These results offer valuable insights into the factors that influence the characteristics of tumor microspheres. This research provides a reference and direction for the optimal design and functional evaluation of scaffold-free 3D culture chips, and holds promise for promoting the development of novel drug research platforms.

Water-in-water emulsions stabilized by nano-chitin

A water-in-water (W/W) emulsion consists of microdroplets was formed by the spontaneous liquid–liquid separation by mixing polyacrylic acid and chitosan oligosaccharide in water, and these microdropletes were stabilized by nano-chitin, formed water-in-water Pickering emulsions. By taking the advantage of interfacial adsorption of nano-chitin, the W/W emulsion droplets composed of polyacrylic acid/chitosan oligosaccharide (COS/PAA) polyelectrolyte coacervate were successfully stabilized. Research results indicated that composite microspheres were formed by the nano-chitin stabilized COS/PAA emulsion, and the size of these composite microspheres was related to the concentration and morphology of the nano-chitin. As the concentration of nano-chitin increases, the size of the composite microspheres first increases and then decreases, gradually becoming more uniform; whereas a decrease in the length of nano-chitin will lead to an increase in the size of the composite microspheres. The formation of composite microspheres may be due to the electrostatic interactions between nano-chitin and the emulsion droplets. In addition, the composite microspheres exhibit the best release effect for berberine hydrochloride at a pH value of 3.

Robust regenerable metal-selenide-chitosan photocatalyst for the effective removal of Bromothymol Blue (BB) from wastewater

Water scarcity has been a crucial debate in recent years regarding the critical scenario of water pollution. The water body is continuously contaminated by organic effluents of textile industries, including pigmented dye pollutants. To tackle water bodies contamination, there is a need to develop an eco-friendly and efficient method for removing toxic dyes. Herein, ternary metal selenide nanocomposites of barium nickel selenide (NBSe-NPs) were synthesized by the solvothermal method supported by chitosan microsphere (NBSe-NPs-CM). Recovery of the catalyst was convenient by capping nanoparticles in the microsphere to maintain effective stability, biocompatibility, and well-designed surface coating. FTIR spectrum verified nanocomposite synthesis and chitosan microsphere (NBSe-CM) formation. SEM observations of nanocomposites and NBSe-CM indicated an average size of 13.78 nm and 253 μm, respectively. The presence of barium, nickel, and selenium elements in the NBS-NPs was verified by EDX analysis. The nanocomposites had a crystallite size of 15.73 nm. The photocatalyst exhibited a narrow bandgap of only 1.3 eV based on Tauc's plot. In addition, the synthesized microsphere demonstrated an efficient photocatalytic degradation (97 %) of Bromothymol Blue dye within 100 min under optimized operating conditions (pH of 6.0, dye concentration of 40 ppm, catalyst dosage of 0.25 g). The photocatalysis process followed the pseudo-first-order kinetics. The repeatability studies showed a slight decline in the catalyst's efficiency after four successive cycles. The DFT study shows that the NBSe-CM is energetically stable with more considerable negative binding energy, and the dye molecule interacts more strongly with the NBSe-CM surface. The findings highlight the exceptional characteristics of the newly designed ternary-metal-selenide-containing chitosan-microspheres for degrading dye contaminants from textile effluents.

Protein Nanospheres and Nanofibers Prepared by Ice-Templating for the Controlled Release of Hydrophobic Drugs.

Protein scaffolds play a vital role in drug delivery systems. However, few research studies have been focused on loading hydrophobic drugs on protein scaffolds in biomedical fields. Here, we report on the development of protein microspheres and nanofibers by a simple ice-templating approach and their use as scaffolds for the controlled release of hydrophobic drugs, with bovine serum albumin (BSA) as the model protein and curcumin as the model hydrophobic drug. The BSA scaffolds display the unique nanofibrous and microspherical structures. This is a surprising discovery because there has been no report on the formation of microspheres via simple ice-templating of solutions or suspensions. To further understand the formation of microspheres by this approach, lysozyme, papain, and their composites with BSA are also studied. It is speculated that nanoparticles are first formed in aqueous BSA solution, attributed to the overlapping of hydration layers and autoassembly of inner hydrophobic cores of BSA globular molecules. Nanoprecipitation and soaking evaporation approaches are then used to load curcumin into the BSA scaffolds, followed by cross-linking with glutaraldehyde vapor to improve stability in an aqueous medium. The controlled release of curcumin is demonstrated, paving the way for various hydrophobic drugs loaded into this biodegradable and nonimmunogenic protein scaffold for potential treatments of diverse diseases.

Tuning surface morphology of AuNPs film via thiourea as a stable SERS platform for methylene blue

Gold nanoparticles (AuNPs) have been extensively utilized in various fields such as sensors, life sciences, and catalysis. In this study, AuNPs were synthesized using a reduction method and subsequently treated with thiourea in an ethanol-water environment to prepare AuNPs film using a centrifugal deposition method for first time, resulting in the aggregation of the initial small-sized AuNPs into larger microsphere-like structures. The addition of thiourea facilitated the interconnection between AuNPs, ultimately leading to the formation of large stable gold microspheres. The sheet resistance of the AuNP films transitioned from being non-conductive to exhibiting a sheet resistance of 42.6 Ω/sq following thiourea treatment. The transformation from a flat surface to tightly connected particles resembling microspheres was observed from SEM images. The thiourea treatment not only altered the morphological characteristic of the AuNPs films but also significantly increased the number of scattering sites on their surface, leading to a substantial enhancement in the Raman scattering effect for methylene blue. This structural configuration also improved the electronic conduction and stability of the treated AuNPs films. Consequently, these findings suggest that AuNPs have promising application prospects in surface-enhanced Raman scatting (SERS), as well as in flexible electronics, catalysis, adsorption, and energy fields.

Nanosheet-assembled porous-wall hollow hydroxyapatite microspheres prepared by a template-free hydrothermal method for pH-responsive drug release

Template residues during the preparation of hydroxyapatite (HA) microspheres with hollow structures limit their biological applications to some extent. In this study, the nanosheet-assembled porous-wall hollow HA microspheres were successfully synthesized by a template-free hydrothermal method. SEM and TEM observations revealed that the prepared hollow HA microspheres were about 3–7 μm in diameter and were composed of an interior cavity and a porous shell assembled by nanosheets (consisting of radial nanorods arranged side-by-side). A possible mechanism for the formation of the hollow HA microspheres was proposed based on the time-gradient experiments. Furthermore, the hollow HA microspheres exhibited excellent vancomycin loading capacity (101.3 mg/g) and pH-responsive release properties. This study provides new inspiration for the design and various applications of hollow materials.

Fabrication of Cross‐Linked Polyimide Hollow Microspheres With Lightweight, Thermal Resistance and Controllable Size

AbstractPolyimide (PI) hollow microspheres possess lightweight and excellent thermal resistance, which are widely used in microreactors, catalysis, adsorption separation, high‐temperature insulation, and so on. In this manuscript, PI hollow microspheres are fabricated by constructing a crosslinked structure combined with gradient heating. The formation of PI hollow microspheres includes gas nucleation, expansion, and imidization. The PI hollow microspheres size is controlled by adjusting polyester ammonium salts size, and microspheres size is distributed in 309–956 µm. PI hollow microspheres have lightweight, excellent heat resistance and carbonization performance, bulk density, initial decomposition temperature, and weight residue at 800 °C is 87.3–178.6 kg m−3, 533.6 °C and 59.8%. The PI hollow microspheres have potential applications in high‐temperature resistant and multifunctional composite materials preparation. Moreover, this method is simple, efficient, and highly operable, which can be used for large‐scale production of PI hollow microspheres.

METTL3 and IGF2BP1-Mediated m6A Modification of ZHX2 Promotes Tumor Property of Renal Cell Carcinoma

Introduction: Renal cell carcinoma (RCC) is a common type of kidney cancer with limited treatment options and a high mortality rate. Therefore, it is essential to understand the role and mechanism of key genes in RCC development and progression. This study aimed to analyze the role of zinc fingers and homeoboxes 2 (ZHX2) in RCC and the underlying mechanism. Methods: RNA expression was analyzed by quantitative real-time polymerase chain reaction, while protein expression was analyzed by Western blotting assay and immunohistochemistry assay. Cell viability was evaluated using CCK-8 assay, and cell proliferation was assessed by EdU assay. The rate of cell apoptosis was quantified by flow cytometry. Transwell assays were conducted to analyze cell migration and invasion. The sphere formation assay was performed to assess the formation of microspheres. Additionally, m6A RNA immunoprecipitation assay and RNA immunoprecipitation assay were utilized to investigate the relationship between ZHX2 and two proteins, methyltransferase like 3 (METTL3) and insulin-like growth factor 2 mRNA-binding protein 1 (IGF2BP1). The stability of ZHX2 mRNA was analyzed through the Actinomycin D assay. Furthermore, a xenograft mouse model assay was conducted to analyze the effect of ZHX2 overexpression and METTL3 silencing on RCC cell tumor properties in vivo. Results: ZHX2 expression was upregulated in both RCC tissues and cells when compared with healthy renal tissues and human renal cortex proximal convoluted tubule epithelial cells. Depletion of ZHX2 inhibited RCC cell proliferation, migration, invasion, and spheroid-forming capacity but promoted cell apoptosis. Moreover, it was found that METTL3-mediated m6A methylation of ZHX2 and IGF2BP1 also stabilized ZHX2 through m6A methylation modification. Furthermore, ZHX2 overexpression showed a potential for attenuating the effects induced by METTL3 silencing and counteracted the inhibitory effect of METTL3 depletion on tumor formation in vivo. Conclusion: METTL3 and IGF2BP1-mediated m6A modification of ZHX2 promoted RCC progression. The finding suggests that ZHX2 may serve as a potential therapeutic target in RCC, providing valuable insights for future clinical interventions.

Chitosan/β-glycerophosphate porous microsphere prepared by facile water-in-water emulsion as a topical hemostatic material

Acute hemorrhage is a major cause of death in many emergency cases. Although many hemostatic materials have been studied in recent years, it is still necessary to develop new hemostatic materials with remarkable efficiency, biosafety, convenient preparation, low cost, and good biodegradability. In this work, novel chitosan (CS)/β-glycerophosphate (β-GP) composite porous microsphere with a uniform size of 210.00 ± 2.14 μm was fabricated through water-in-water (W/W) emulsion via microencapsulation, which can avoid the use of toxic crosslink chemicals and organic solvents to achieve facile and efficient preparation of microspheres. β-GP could promote the formation of microspheres by enhancing the hydrogen-bonding interaction between CS chains, which contributed to the macro-porous structure. Owing to their large pore size (6.0 μm) and high specific surface area (37.8 m2/g), the CS/β-GP microspheres could absorb water quickly and adsorb protein, red blood cells, and platelets through electrostatic forces to promote blood coagulation. Furthermore, the CS/β-GP microspheres achieved a significantly shortened hemostatic time (45 s) and reduced blood loss (0.03 g) in a rat liver injury model. Rat tail amputation test also showed a satisfactory hemostatic effect. Overall, the green and porous CS/β-GP microspheres can be used as a facile and topical rapid hemostatic material.

In Situ Formation of Compound Eye-like SAN-OSB Composite Microspheres by Melt-Blending Method: Enhancing Multiple-Scattering Effect.

The preparation of novel structures of light-diffusing particles is currently a research focus in the field of light-diffusing materials. This study, conducted by the common melt-blending process, controlled thermodynamic and kinetic factors to distribute smaller-sized organic silica bead (OSB) particles at the interface between a polycarbonate (PC) matrix and spherical island-phase styrene-acrylonitrile copolymer (SAN) for the in situ formation of compound eye-like microspheres with SAN as "large eyes" and OSBs as "small eyes". Through the multiple-scattering effects of these compound eye-like microspheres, these light-diffusing materials significantly improved the haze, scattering range, and light-shielding capabilities while maintaining high transmittance. Specifically, the PC/SAN-OSB light-scattering materials achieved a haze of 100% with an OSB content of only 0.17%, maintaining a transmittance of 88%. Compared with the PC/OSB system with the same level of haze, the addition of OSB was reduced by 88%. Therefore, this study achieved exceptionally effective light-diffusing materials through a simple, environmentally friendly, and low-cost preparation method, suitable for the scalable production of light-diffusing materials in new display and lighting fields.

Droplet Microfluidic Method for Estimating the Dynamic Interfacial Tension of Ion-Crosslinked Sodium Alginate Microspheres.

The research focuses on optimizing the production of hydrogel microspheres using droplet microfluidics for pharmaceutical and bioengineering applications. A semiempirical method has been developed to predict the dynamic interfacial tension at the interface of ion-cross-linked sodium alginate microsphere-sunflower oil modified with glacial acetic acid and Tween 80 surfactant. These microspheres are produced in a small-scale coaxial device that is manufactured using affordable DLP/LCD 3D printing technology with a transparent photopolymer. The method was tested to design the minireactor in the device, which allows for the production of fully cross-linked microspheres that are ready for use at the output of the reactor without additional cross-linking steps in the microsphere collector. The mathematical expression for estimating the interfacial tension at the moment of formation of a hydrogel microsphere includes the Reynolds number for a two-phase liquid, the Ohnesorge number, and the surface tension at the liquid-air interface for continuous medium flow (modified oil). The reliability of the prediction is confirmed for continuous medium and dispersed phase flow rates of 0.8-3.2 and 0.01-0.08 mL/min, respectively. The evolution of the interfacial tension from the moment the microspheres formed and the estimated ultimate interfacial tension in a cross-linked hydrogel-modified oil system contributed to the reliable determination of the linear size of a minireactor. The ultimate interfacial tension of 76.5 ± 0.3 mN/m was determined using the Young-Laplace equation, which is based on measuring the surface free energy of the hydrogel as soft matter using the Owens-Wendt method. Additionally, the equilibrium static contact angle of the fully cross-linked hydrogel surface wetted with oil is measured using the sessile drop method. From a practical perspective, a method for optimizing and streamlining the high-tech manufacturing of cross-linked polymer microspheres and mini- and microchannel devices for use in bioengineering and pharmaceutical applications is suggested.

Fabrication of Polymer/Cholesteric Liquid Crystal Films and Fibers Using the Nonsolvent and Phase Separation Method.

In recent years, liquid crystal materials have drawn great interest because of their wide range of applications. Among various thermochromic materials, cholesteric liquid crystalline (CLC) materials have been well studied and reported. CLC materials have the advantages of ready manipulation and multiple color transitions. For the further development of smart clothing and wearable electronics, however, the incorporation of CLC materials into polymers still remains challenging. The difficulties lie in the prevention of leakage of CLC and retention of the cholesteric liquid crystalline phase. In this work, we demonstrate a versatile nonsolvent and phase separation method using polar solvents to incorporate CLC microspheres into polymer matrix. Poly(vinyl alcohol) (PVA), a water-soluble polymer, is chosen as the polymer because of its high transparency and ease to handle. Using spin-coating and wet spinning techniques, PVA/CLC films and fibers can be fabricated. The formation of CLC microspheres in the polymer matrix is characterized through optical and polarized microscopy. Compared with the CLC films, the PVA/CLC composites demonstrate superior thermal stability. Moreover, both PVA/CLC films and fibers exhibit good color stability from the electrical tests. This work provides an effective strategy to prepare polymer/CLC composites, paving a wide avenue toward applications in smart textiles, display technologies, and medical devices.

Facile formation of hierarchical magnesium silicate hydrate microspheres as an adsorbent for the textile dyes

Hierarchical porous magnesium silicate hydrate (MSH) microspheres composed of sheets are successfully developed under facile conditions using a hard template. The role of hexadecyltrimethylammonium bromide (CTAB) on the formation and adsorption behavior was also observed for the methyl orange and methylene blue. The formed MSH possesses a surface area of 453.24 m2/g, an average pore size of 6.38 nm, and a pore volume of 0.75 cm3/g without CTAB. Based on the role of CTAB and the change in the ratio of Mg/Si, the MSH retained its sphere-like structure with a variation in pore parameters. The formed MSH was used as an adsorbent to remove methylene blue and methyl orange. The pseudo-second-order kinetic and Langmuir Isotherm models are well-fitted, with a 256.4 mg/g removal capacity and 84.2 mg/g for methylene blue and methyl orange, respectively. The modified MSH with CTAB played a positive role for the methyl orange and a negative role for the methylene blue regarding removal performance.

Formation of core-shell structure MnCo2O4 microspheres and as a bifunctional catalyst for zinc-air batteries

Efficient and stable bifunctional catalysts, facilitating oxygen reduction and oxygen evolution, play a pivotal role in energy conversion and storage fields. In this paper, four core-shell MnCo2O4 catalyst samples are prepared by controlling different solvent heating time, which are 0.5 h, 2 h, 6 h, and 12 h, respectively. The subsequent tests indicate that the sample with a 6 h not only has an ideal core-shell structure, but also exhibits favorable performance. The unique core-shell structure and favorable electrochemical performance are mainly attributed to the prepared precursor spheres. The microspheres have an inherent core-shell structure. Detailed studies of the morphological variations of MnCo2O4 catalysts with the different solvent heating time are performed using transmission electron microscopy and field emission scanning electron microscopy. Furthermore, we analyze the potential formation mechanism of the core-shell structure MnCo2O4 catalyst. The obtained core-shell structured MnCo2O4 catalysts provide a new way for the preparation of cathode catalyst for zinc-air batteries.

Rational design of nitrogen-doping Ti3C2Tx microspheres with enhanced polysulfide catalytic activity for lithium-sulfur batteries

The primary challenges that impede the practical applications of lithium-sulfur batteries are the significant shuttle effect of polysulfides, huge volume expansion, and slow redox kinetics. In this work, three-dimensional nitrogen doping Ti3C2Tx MXenes (3D N-Ti3C2Tx ) were successfully synthesized by spray drying and subsequent annealing, and hydrochloric acid-treated melamine effectively reduces the oxidation of MXenes in these processes. The formation of a unique nanoflower-shaped microsphere endows 3D N-Ti3C2Tx with a significant specific surface area and pore volume. The combination of nitrogen doping and the large specific surface area increased adsorption capacity and catalytic conversion ability for polysulfide intermediates. Consequently, the obtained 3D N-Ti3C2Tx /S cathode exhibited high-capacity retention (578.5 mAh g-1 after 500 cycles at 0.5 C and 462.5 mAh g-1 after 1,000 cycles at 1 C), superior rate performance (651.2 mAh g-1 at 3 C), and excellent long-term cycling performance (capacity fading rate of 0.076% per cycle at 0.5 C and 0.046% per cycle at 1 C). This work expands the potential applications of MXenes for lithium-sulfur batteries.

Mesoporous Mn-substituted MnxZn1-xCo2O4 ternary spinel microspheres with enhanced electrochemical performance for supercapacitor applications.

Extensive investigations have been carried out on spinel mixed transition metal oxide-based materials for high-performance electrochemical energy storage applications. In this study, mesoporous Mn-substituted MnxZn1-xCo2O4 (ZMC) ternary oxide microspheres (x = 0, 0.3, 0.5, 0.7, and 1) were fabricated as electrode materials for supercapacitors through a facile coprecipitation method. Electron microscopy analysis revealed the formation of microspheres comprising interconnected aggregates of nanoparticles. Furthermore, the substitution of Mn into ZnCo2O4 significantly improved the surface area of the synthesized samples. The electrochemical test results demonstrate that the ZMC3 oxide microspheres with an optimal Mn substitution exhibited enhanced performance, displaying the largest specific capacitance of 589.9Fg-1 at 1Ag-1. Additionally, the ZMC3 electrode maintained a capacitance retention of 92.1% after 1000 cycles and exhibited a significant rate capability at a current density of 10Ag-1. This improved performance can be ascribed to the synergistic effects of multiple metals resulting from Mn substitution, along with an increase in the surface area, which tailors the redox behavior of ZnCo2O4 (ZC) and facilitates charge transfer. These findings indicate that the incorporation of Mn into mixed transition metal oxides holds promise as an effective strategy for designing high-performance electrodes for energy storage applications.

Effect of multi-walled carbon nanotubes properties on the photocatalytic activity of bismuth-based composites synthesised via an imidazolium ionic liquid

The use of various types of multi-walled carbon nanotubes in the synthesis of bismuth oxybromide semiconductors via imidazolium ionic liquid was studied in detail. The effect of the MWCNT shape, specific surface area, and various diameters on the morphology, surface properties and photoactivity of the Bi-based composites has been investigated for the first time. So far, the literature has only shown the enhancement of photocatalytic activity of composites containing MWCNT; however, our research shows a broader view of the issue. The photocatalytic activity of the individual composites under UV–Vis irradiation was assessed by the degradation of various micropollutants, showing the diversity of properties of the obtained composites. It is also significant that in the composite system, the imidazolium ionic liquid played a crucial role in the formation of microspheres and acted as a dispersing agent, leading to an even distribution of MWCNTs on the surface of the spherical bismuth oxybromide.

Preparation and properties of vancomycin-loaded PLA-PEG-PLA microspheres by electrostatic spray technology

Abstract Vancomycin in sustained release still needs to be investigated. Polylactic acid (PLA) was widely used in the biomedical field for its good biocompatibility, especially in the field of controlled drug release. In this study, polyethylene glycol (PEG) was used to modify PLA to improve the hydrophilicity of the material. The synthesis of the block copolymers was proven by infrared and nuclear magnetic characterization and the hydrophilicity was tested. Vancomycin was immobilized by coaxial electrospray, and PLA-PEG6000-PLA was used as the shell layer. The parameters of coaxial electrospray under this material were explored, and the effects of concentration, voltage and temperature on the formation of microspheres were systematically studied. The optimum parameters were determined as follows: concentration 20 wt%, temperature 35 °C and voltage 14 kV. The maximum encapsulation rate and drug loading were calculated to be 89.54 ± 1.22 % and 15.33 ± 0.97 %, respectively, and the cumulative release of drug-loaded microspheres was less than 45 % in 24 h with a slow releasing time of more than one month. The drug loaded microspheres showed good sustained release and good control of burst release.

Development of chitosan microparticles via interfacial polymeric crosslinking method utilizing sodium trimetaphosphate

Chitosan derived from the alkaline deacetylation of chitin found in crustacean exoskeletons, is a natural biopolymer. It has been employed as a matrix for microparticles and crosslinked systems, facilitating the immobilization and controlled release of drugs, ensuring stability, safety, and efficacy. Microencapsulation, a technique involving the coating of active products in polymeric layers, allows for their release under specific conditions and controlled rates, achieved through the formation of microspheres or microcapsules. The distinctive features of chitosan, such as its non-toxicity, biodegradability, and cost-effectiveness, make it advantageous over other polysaccharides. This study aimed to produce chitosan microparticles through the interfacial polymeric crosslinking method, utilizing sodium trimetaphosphate as the crosslinking agent. A pre-formulation study, involving varying concentrations of polymer, crosslinking agent, and two stirring speeds, was conducted to assess their direct correlation with microparticle size. The interfacial polymeric crosslinking method successfully yielded spherical microparticles, maintaining a wrinkled surface aspect, with size variations according to the formulation. Parameters such as crosslinking agent concentration and stirring speed were identified as influencing factors on microparticle size. In conclusion, interfacial polymeric crosslinking using sodium trimetaphosphate proves effective in obtaining chitosan microparticles.