Microscopy Studies Research Articles

Effect of novel aluminium titanate on mechanical, thermal and ablation performance behavior of carbon fiber reinforced phenolic resin composites

AbstractThermal Protection Systems (TPS) protect re‐entry space vehicles from the harsh heating they encounter when hypersonically flying through a planet or the earth's atmosphere. Carbon fiber‐reinforced phenolic resin composites were widely used for the thermal barrier structure of aerospace re‐entry vehicles. A Novel Aluminium Titanate (Al2TiO5/AT) micro powder‐modified Polyacrylonitrile (PAN) based Carbon Fiber Fabric‐Resorcinol Phenol Formaldehyde Resin (C‐PR) (AT‐C‐PR) composites are well prepared to meet the requirements of TPS. The AT may act as an insulating layer and anti‐ablative material due to its excellent thermal shock resistance in TPS. To understand the effectiveness of AT content on density, barcol hardness, interfacial interactions, thermal conductivity, and thermal stability, the C‐PR composites were produced with and without loading of AT with various weight percentages, namely 0 wt% (C‐PR), 1,3, and 5 wt% (AT‐C‐PR) by hot compression molding method. The microstructural and elemental change of the composites were analyzed by microscopic and spectroscopic studies. Results suggested that the Interlaminar Shear Strength (ILSS) of the composites was increased by about 14% at 1 wt% of AT loading. Mass, Linear Ablation Rates (MAR, LAR), and back‐face temperature of C‐PR and AT‐C‐PR composites were decreased to 0.15128 g/s, 0.01233 mm/s, and 405°C, respectively by loading of AT up to 1 wt%. The thermally ablated composites were also evaluated for their crystallographic phase changes. The work provided an effective way to improve the thermo‐mechanical and ablation performance characteristics of the AT‐C‐PR composites that can be potentially used in TPS of re‐entry vehicles.Highlights This investigation utilized innovative Al2TiO5/Aluminium Titanate (AT) ceramic powder as a filler in reinforcing Phenolic Resin (PR) with PAN‐based Carbon Fiber (C). It examined the impact of various loadings of AT in C‐PR composites (AT‐C‐PR) on their physical, mechanical, thermal, and anti‐ablation properties. The AT‐C‐PR composites exhibit reduced density, lower thermal conductivity, and enhanced ILSS (31 MPa) compared to the C‐PR composites. Optimal ablation resistance and thermal stability were achieved with a loading of 1 wt% AT (Mass Ablation Rate: 0.15128 g/s and Linear Ablation Rate: 0.01233 mm/s) compared to the C‐PR composites. Microstructural and elemental analysis of the composites were conducted using microscopy and energy‐dispersive spectroscopy, revealing the presence of oxides and carbides on the ablated surface. The phase transition and alterations in microstructure, coupled with the oxidation of AT, have enhanced the ablation resistance and reduced the back face temperature of different weight percentages of AT‐C‐PR composites, such as 1 wt% AT (413°C), compared to the C‐PR composites (704°C).

Impact of 6-hydroxydopamine on agonist-induced human platelet functional parameters: An explanation for platelet impairment in Parkinson’s disease

Parkinson’s disease (PD) is the second-most prevalent neurodegenerative disease worldwide, which worsens with advancing age. It is a common movement disorder and is often associated with several vascular diseases with decreased stroke frequency. Circulating platelets substantially regulate vascular complications, including stroke, and share striking similarities with PD neurons. Although structural alterations in platelets are well-documented in PD, their functional parameters remain unclear. This study aimed to investigate the functional abnormalities in platelets associated with PD by evaluating key functional aspects such as adhesion, activation, secretion, aggregation, and clot retraction. To achieve this, we treated human blood platelets with 6-hydroxydopamine or 6-OHDA, that selectively destroys dopaminergic neurons, thereby creating an in vitro experimental model that closely resembles the pathogenic environment in PD, and examine its impact on platelet functions. In our study, platelet adhesion was assessed and further evaluated by a microplate reader, activation and secretion by a flow cytometer, aggregation by aggregometer, and clot retraction by Sonoclot. Phase-contrast and confocal microscopic studies further verified the results from the above experiments. Our findings showed that 6-OHDA treatment significantly inhibited thrombin (a platelet agonist)-induced functions, including adhesion, activation, aggregation, secretion, and clot retraction in human-washed platelets. In summary, this research provides pioneering evidence that 6-OHDA induces abnormal platelet functions, shedding light on the previously unexplored processes by which 6-OHDA affects platelet activity.

Layered composite magnetic refrigerants for hydrogen liquefaction

Many exciting effects resulting from the coupling of magnetic sublattice with a magnetic field, may be exposed by changing the field. One such phenomenon is the magnetocaloric effect, which is characterized by the absorption or emission of heat in response to changes in the external magnetic field. Magnetic refrigeration based on the magnetocaloric effect has emerged as an attractive alternative to conventional cooling technology that relies on gas compression and expansion. It is not only more efficient and environmentally friendly, but it can also be implemented across a broad temperature range, from ultra-low to a few hundred Kelvin temperatures. One of the areas where magnetic cooling can have a significant impact is hydrogen liquefaction. Hydrogen is one of the most promising candidates for clean energy sources, but it must be liquefied to facilitate storage and transportation, which requires cooling it down to ∼20 K. The ideal magnetic refrigerant should exhibit consistent magnetocaloric properties across the entire operating temperature range of a cooler. This paper presents novel three-layer composite magnetic refrigerants that provide a uniform magnetocaloric response over a 30 K temperature range. The selected initial HoNi2, DyNi2, and TbNi2 magnetic intermetallic compounds with a Laves phase structure exhibit large magnetocaloric properties in the temperature range of 13–37 K. The composite composition of 23.56 wt% HoNi2 + 18.21 wt% DyNi2 + 58.23 wt% TbNi2 optimized for 2 T magnetic field change, was determined through numerical approach. The composites are manufactured using spark plasma sintering (SPS) and innovative high-isostatic-pressure (HIP) synthesis. The results of isothermal entropy change derived from magnetization data for a 2 T magnetic field change indicated 4.7 J/kgK (47.2 mJ/cm3K) and 4.4 J/kgK (44.2 mJ/cm3K) in the temperature range of approx. 13–42 K for composites after SPS and SPS + HIP processes, respectively. Despite the sample subjected to HIP showing slightly lower results, the entropy change is nearly uniform over the 30 K temperature range due to enhanced atomic diffusion between neighboring compounds, as confirmed by microscopic studies. Such a uniform magnetocaloric response in ∼30-K temperature range has never been observed before in layered refrigerants. By utilizing the innovative high-isostatic-pressure synthesis technique, we have paved the way to high-performing magnetic composite materials that can be used in cryogenic magnetic coolers operating over a broad temperature span, expanding the possibilities of what can be achieved and laying the foundation for cost-effective, clean hydrogen energy.

SURFACE ACTIVITY AND PHASE BEHAVIOUR OF POTASSIUM HEPTYLENE DECYL SUCCINATE / WATER BINARY SYSTEM

The surface activity of potassium heptylene decyl succinate (PHDS) at water-air interface was studied. The obtained results showed a very good correlation between the surface activity of PHDS and concentration of surfactant solutions and temperature of the system. The phase behaviour and structure of aggregates in PHDS)/water binary system were investigated. The phase diagram of the PHDS/water binary system was obtained depending on the concentration of components and temperature of the system. It was established that due to the double hydrocarbon chain of the PHDS molecule, the lamellar liquid crystalline phase exists across a wide range of the phase diagram. It was shown that upon the addition of water, the cross-sectional area of the PHDS molecules in lamellar liquid crystals is changed insignificantly. This result was associated with the invariability of the distance of the lipophilic layers of formed lamellar liquid crystals by PHDS molecules. On the basis of video-enhanced microscopic studies, it was established that in two-phase region of the phase diagram, lamellar liquid crystals coexist with water in the form of vesicles.

Cadmium-induced pancreatic toxicity in rats: comparing vitamin C and Nigella sativa as protective agents: a histomorphometric and ultrastructural study

The study aimed to assess the toxic effect of cadmium (Cd) on the exocrine and endocrine functions of pancreas, the changes in pancreatic tissue after Cd withdrawal, and the protective effects of vitamin C (VC) and Nigella sativa (NS) against Cd-induced damage. Rats were assigned to: control, Cd-treated (0.5 mg/kg/d intraperitoneal [IP] injection), VC and Cd-treated (receiving 100 mg/kg/d VC orally and Cd concomitantly), NS and Cd-treated (receiving 20 mg/kg/d NS and Cd, simultaneously), and Cd withdrawal (receiving Cd for 30 d then living free for recovery for other 30 d). Blood samples were collected and post-sacrifice pancreatic specimens were processed for light and electron microscope study. Quantitative analyses of pancreatic collagen area%, pancreatic islet parameters, β cell density, and insulin immunoexpression were done. Fasting blood glucose was significantly increased in Cd-treated and Cd-withdrawal groups, while co-treatment with VC and NS caused significant reductions (p < 0.05). Cd-induced extensive degenerative changes in pancreatic acini and islets at light and ultrastructure levels. Obvious fibrosis and congestion of blood vessels were noticed. Significant reductions in pancreatic islet number, volume, and surface area and diminished beta cell count and insulin immunoexpression were observed. After withdrawal of Cd, the whole pancreatic tissue still showed a serious impact. Concomitant treatment with VC or NS obviously reduced these degenerative changes and significantly improved pancreatic islet parameters and insulin immunoexpression. VC showed a better amendment than NS, but this difference was statistically insignificant. Therefore, VC and NS could be used as prophylactic agents that lessen Cd consequences on the pancreas.

Evaluating the protective effects of mouthguards with neutralizing agents against chlorinated water-induced enamel erosion.

Dental erosion is a common problem among swimmers. This study evaluated the effects of mouthguard use with or without neutralizing agents, compared to no mouthguard use, on the microhardness of dental enamel after a swimming simulation. Ninety-six human premolars were randomly allocated into six groups of 16 each: Group A (no mouthguard), Group B (mouthguard only), Group C (mouthguard with fluoride toothpaste), Group D (mouthguard with fluoride-free toothpaste), Group E (mouthguard with CPP-ACP), and Group F (mouthguard with arginine-fluoride toothpaste). Enamel slabs were fixed in a wax model (Typodont Articulator) and used to fabricate mouthguards for all groups except Group A. Each specimen underwent cyclic immersion: 2 h in acidic chlorinated water (pH 3.1) followed by 22 h in artificial saliva, for 28 days, to simulate swimming exposure. The change in enamel surface hardness was measured using a Vickers hardness tester. All groups underwent microhardness testing, scanning electron microscopy, and polarized light microscopy. The enamel hardness significantly decreased in all groups after the swimming simulation (paired t-test, P-values < 0.001), except for Group F, which used a mouthguard with arginine-fluoride toothpaste [mean reduction: 17.9 kg/mm2, 95% confidence interval (CI): -1.9, 37.7, P-value = 0.07]. Group A, without a mouthguard, exhibited the highest reduction in enamel surface hardness (mean: 190.6 kg/mm2; 95%CI: 177.4, 203.9), significantly differing from all other groups with mouthguards (P-values < 0.001). However, no statistically significant differences were observed in enamel hardness reduction among the mouthguard groups. SEM micrographs illustrated rough, irregular erosion patterns and several deep porous areas on enamel surfaces of Group A. In contrast, all mouthguard groups showed enamel surfaces similar to sound tooth surfaces. A polarized light microscopic study revealed the deepest dark areas on the enamel surface of Group A. Mouthguards significantly reduced enamel microhardness loss compared to no mouthguard use. While no significant differences were found among mouthguard groups with or without neutralizing agents, those lined with arginine-fluoride toothpaste showed the least enamel loss, suggesting its potential protective effect. Within the limitations of this in vitro study, further clinical trials are needed to validate these results.

Study on the Stability of Fe/Al2O3 Interface in Metal-Based Cermets Using Thermodynamic Modeling

Iron-based cermet has the advantages of high-temperature resistance, low price, good performance, and so on. At present, most of the studies on cermets are focused on the measurement of macroscopic properties and optical microscopic characterization, while there are few microscopic studies on the interface structure. In this paper, based on density functional theory (DFT), the stability of the Fe/Al2O3 interface is studied, and the stability difference and interface formation mechanism of different end combinations are investigated. By calculating the surface energy, adhesion work, interface energy, density of states, charge density, differential charge density, and so on, it was concluded that the stability of the O-terminal interface was greater than that of the Al interface. It has a certain guiding role in the preparation of Fe/Al2O3 cermet materials.

Macroscopic and Microscopic Development of the Stomach in Hamdani Crossbred Sheep Fetuses (Ovis aries)

The ruminant stomach is a critical digestive department in terms of converting low-quality feed into high nutrient-value substances. In these animals, there is a compound stomach structure with 4 compartments. Understanding the developmental structure of the stomach at macroscopic and microscopic levels is especially important in terms of nutrition. Türkiye can be considered one of the leading countries in the world in terms of sheep breeding. Our study aimed to investigate macroscopically and microscopically the developmental structures of the stomach of Hamdani crossbred sheep fetuses collected at different gestation periods. For this purpose, a total of 15 fetuses, 5 fetuses each from 3 different periods of pregnancy, were included in the study. The stomachs of the fetuses were dissected simultaneously and their topographic and macroscopic features were determined. After routine histological procedures, the stomachs separated from the body cavities were stained with Hematoxylin &amp;amp; Eosin and Masson Trichrome stains. As a result of the study, macroscopic and microscopic information about fetal development of the stomach was obtained. It was revealed macroscopically and microscopically that the rumen was the largest part of the stomach until the middle of the 2nd period of gestation, and that the abomasum grew rapidly at the end of this period and showed similar characteristics to the adult sheep stomach. The data of the study will contribute to macroscopic, microscopic, and ultrasonographic studies on the stomach in ruminant animals.

Trichoderma harzianum TIND02 upregulates the expression of pathogenesis-related genes and enzymes and enhances gray blight resistance in tea

The gray blight incited by Pestalotiopsis and allied genera is a prevalent disease affecting tea cultivation, and managing it with Trichoderma spp. is an alternative to synthetic fungicides. Plants modify their arsenal system against pathogens when they are exposed to Trichoderma spp., which produces proteins and enzymes associated with pathogenesis. Understanding the expression pattern of defense-related markers will help in developing gray blight resistance tea cultivars. Thus, this study intended to induce resistance against gray blight in tea by Trichoderma harzianum TIND02. For this, a total of eight Trichoderma isolates originated from organic tea rhizospheres were characterized and evaluated for their efficacy. Dual culture test revealed isolate TIND02 as the most potential candidate with 74.6% inhibitory activity against gray blight pathogen Pseudopestalotiopsis theae. Molecular characterization based on ITS and tef-1 alpha genes confirmed isolate TIND02 as T. harzianum. Scanning electron microscopic study showed the mycoparasitic nature of T. harzianum TIND02 (TH-TIND02) to Ps. theae. The ethyl acetate extract of TH-TIND02 at 100 and 200 μg mL−1 showed potential inhibitory activity (>69.9%) against Ps. theae which confirmed the presence of higher volatile metabolites. Gas chromatography–Mass spectrometry study revealed that ethyl acetate extract of TH-TIND02 was composed of 21 major and minor volatile organic compounds with acetamide, 2, 2, 2-trifluoro-N, N-bis trimethyIsilyl–C (94.74%) as a major component. The isolate also produced chitinase, cellulase, β-1, 3 glucanase, and protease hydrolytic enzymes. Nursery experiments revealed that 2% and 5% doses (2 × 106 CFU mL−1) of TH-TIND02 significantly reduced respective 65.0% and 70.0% disease severity over control with improved plant growth. Besides, expressions of defense-related enzymes (chitinase, pHenolics, peroxidase, phenylalanine ammonia lyase, β-1, 3-glucanase, and polyphenol oxidase) and pathogenesis-related genes (chitinase and β-1, 3-glucanase) due to TH-TIND02 were determined. The secretion of defense-related enzymes was highly upregulated in plants applied with TH-TIND02 followed by Ps. theae inoculation compared to controls. The RT-qPCR analysis showed that the expression of both genes in co-inoculated plants was two-fold higher than in control after 21-day post incubation. These results suggest that TH-TIND02 application reduced gray blight severity by elevated enzyme activity and overexpressed pathogenesis-related genes in tea plants which offer for its eco-friendly and sustainable use as a bio-fungicide in tea gardens.

An alternative approach in the synthesis of strontium-hydroxyapatite and strontium hydroxyapatite embedded in graphitic carbon nitride nanocomposites for potential tissue engineering applications

Sr-hydroxyapatite has drawn much attention with promising applications in biomedical engineering especially in drug delivery and tissue repair. A novel protocol for the preparation of Strontium hydroxyapatite (Sr-HAP) and Strontium hydroxyapatite encapsulated by graphitic carbon nitride (Sr-HAP@gCN) with high purity and better homogeneity was adopted for potential use in orthopaedic surgeries. The physiological pathway of Strontium and calcium inside humans follow the same trend leading to the mineral deposition of the bone. In the present study, a novel attempt in synthesizing Sr-HAP and Sr-HAP@gCN by the hydrothermal method is proposed for obtaining an ideal biomaterial with potential biocompatibility and pharmacological activity. Phase identification by X-ray diffraction (XRD), Fourier transform Infra-Red spectroscopic analysis (FTIR), Electron & atomic force microscopic studies, Thermogravimetric and Raman spectroscopic analysis was performed on the prepared Sr-HAP and Sr-HAP@gCN to characterize the incorporation efficiency of Strontium. Resazurin microtiter assay and MTT assay were used to evaluate antimicrobial susceptibility and biocompatibility. The typical crystal phase of Sr-HAP and a phase change in Sr-HAP@gCN have been demonstrated with special reference to the interfacial connection between gCN and Sr-HAP through FT-IR studies. Raman spectroscopy revealed the archetypal signature of symmetric and asymmetric PO vibrations pertaining to linearity change with the addition of Strontium. The biological effect of Sr-HAP and Sr-HAP@gCN was quite significant in inducing mineralization when kept immersed in simulated body fluid (SBF) for 21 days. Promising results pertaining to antimicrobial susceptibility and biocompatibility have been proved as an encouraging choice for drug delivery applications and bone filling applications.

Comparative evaluation of continuous and sequential chelation on the dentinal tubule penetration of bioceramic-based sealer - A confocal laser scanning microscopic study.

Effective endodontic treatment relies heavily on proper instrumentation, thorough disinfection, and precise three-dimensional obturation of the root canal system. This study aims to evaluate and compare continuous chelation (etidronic acid and sodium hypochlorite [NaOCl]) and sequential chelation (citric acid and NaOCl) on the dentinal tubule penetration of bioceramic-based sealer (Bio-C)-A confocal laser scanning microscopic study. In vitro experimental study. Sixty extracted permanent single-rooted teeth were selected and decoronated below cementoenamel junction to get a standardized length of 12 mm across all samples followed by enlargement of root canals till rotary ProTaper F3. The samples were randomly divided into three groups: Group I (control): Canals were irrigated with 3 mL 17% ethylenediaminetetraacetic acid/3 mL 3% NaOCl; Group II: Canals were irrigated with 10 mL etidronic acid + NaOCl solution; and Group III: Canals were irrigated with 3 mL 10% citric acid followed by 3 mL 3% NaOCl. 0.1% rhodamine B dye was mixed with Bio-C sealer followed by obturation. All the samples were subjected to confocal laser scanning microscopy evaluation. One-way analysis of variance with the Bonferroni post hoc test was used for the statistical analysis. The level of significance was set at P < 0.05. The pairwise comparison of depth of penetration showed statistically significant results in all the coronal, middle, and apical thirds. Group II showed better depth of penetration than Groups I and III. Continuous chelation protocol using etidronic acid and NaOCl showed greater and statistically significant sealer penetration depth when compared to the sequential chelation protocol, i.e., citric acid at all three levels.

Enhanced oxygen reduction reaction with rare-earth metal-based Ce-N-C catalyst

An atomically dispersed single atom catalyst based on rare-earth metal, Cerium embedded into the porous N-doped carbon (Ce-N-C), has been synthesized by using metal-organic framework method. The Ce-N-C catalyst have been physiochemically and electrochemically characterized in detail. Transmission electron microscope studies revealed atomically dispersed Ce atoms on the N-doped carbon support. The electrochemical oxygen reduction reaction (ORR) kinetics of Ce-N-C-3 catalyst revealed an admirable activity with a half-wave potential of 0.89 V, nearly equal to state-of-the-art Pt/C catalyst. The K-L plots and RRDE measurements revealed a nearly direct 4 electron reduction of O2 to H2O by Ce-N-C-3 catalyst. In addition, the chronoamperometry studies with a simulated H2O2 environments clearly revealed the significance of Ce3+/Ce4+ redox couple in deactivating hydrogen peroxide and/or hydroperoxide radicals. The commendable ORR activity, stability and peroxide resistance of Ce-N-C-3 catalysts is credited to the high surface area, atomically dispersed Ce atoms, formation of Ce-N4-C active sites in the catalysts, evidenced from the XPS analysis, in addition to the significance of Ce3+/Ce4+ redox couple in the catalyst. Most importantly, chronoamperometric studies revealed clear evidence of Ce3+/Ce4+ couple significance, helping in effectively mitigating the peroxide related detrimental effects to the ORR catalyst.

Microscopic study of the gonads in males and females of Euthynnus alletteratus (Rafinesque, 1810) and Sarda sarda (Bloch, 1793), two species of coastal affinity from the gulf of Guinea, Côte d’Ivoire

Microscopic study of the gonads in males and females of Euthynnus alletteratus (Rafinesque, 1810) and Sarda sarda (Bloch, 1793), two species of coastal affinity from the gulf of Guinea, Côte d’Ivoire

Study of quality indicators of gravure imprints obtained with fluorescent ink

The peculiarities of the decoration of gravure imprints on cardboard using fluorescent inks are considered. The influence of the number of fluorescent impurities added to gravure printing ink on the optical indicators of printed image quality, particularly optical density, and gloss, is investigated. Increasing the number of fluorescent impurities added to the ink from 10 to 30% helps to increase the gloss on imprints from 2 to 15 units. Conducted thermogravimetric studies show the resistance of fluorescent imprints to the influence of temperatures during drying in the printing process. The topography of the surface of the substrates and its influence on the quality of imprints is studied. Conducted electron microscopic studies of imprints obtained with inks with different amounts of fluorescent impurities show their uniform distribution on the surface of the substrate. Studies of the fluorescence spectra of the ink and the imprints formed by it confirm the phenomenon of an increase in the intensity of the glow of printed images. The studies confirm the well-known influence of substrate roughness on the smoothness of gravure imprints. It is established that the absence of significant macro irregularities on the surface of Koppargloss FBB cardboard is due to the presence of two coating layers. Analysis of the surface profiles of FBB cardboard shows that its roughness parameter (Ra = 0.424 μm) is three times smaller compared to Incada Silk С GC1 cardboard (the roughness parameter Ra = 1.28 μm), with a single-layer coating. Such a pattern is also preserved on the imprints, which is reflected in their quality accordingly. Studies show that for imprints on GC1 cardboard, the average ΔE value is 2.23, for imprints on FBB cardboard, the average ΔE value is 3.71, which is due to the presence of double coating. The factors that can influence the process of fluorescence of printed images are outlined. The technological characteristics of inks for gravure printing on packaging are described.

RETRACTION: Preventive Effect of Naringin on Cardiac Mitochondrial Enzymes During Isoproterenol-induced Myocardial Infarction in Rats: A Transmission Electron Microscopic Study.

M. Rajadurai and P. Stanely Mainzen Prince, "Preventive Effect of Naringin on Cardiac Mitochondrial Enzymes During Isoproterenol-induced Myocardial Infarction in Rats: A Transmission Electron Microscopic Study," by Journal of Biochemical and Molecular Toxicology 21, no. 6 (2007): 354-361, https://doi.org/10.1002/jbt.20203. The above article, published online on 9 November 2007 in Wiley Online Library (wileyonlinelibrary.com), has been retracted by agreement between the journal Editor-in-Chief, Hari K. Bhat; and Wiley Periodicals, LLC. The retraction has been agreed due to duplication of panels presented in figure 3b and 3 f. The authors did not provide an explanation or their raw data. The editors consider the results and conclusion reported in this article unreliable.

BEAD SIZE AND RHEOLOGICAL PROPERTIES OF SEBS-BASED ELASTIC BEADS

ABSTRACT Styrene–ethylene–butylene–styrene (SEBS) is a thermoplastic elastomer that has applications in robotics and shock absorption. Although SEBS as a bulk material as well as an additive to solid composites has been extensively studied, this work focuses on developing SEBS-based beads to enhance material elasticity. SEBS bead mixtures were developed by mixing SEBS elastomer, water, and surfactant (Triton X-100) at high temperature. Stability, rheology, and microscopy of SEBS bead mixtures were studied as a function of neat SEBS concentration in SEBS elastomer, SEBS elastomer concentration, and surfactant concentration. Resulting bead mixtures were classified as creamed, homogenous and stable, or aggregated based on the mixture’s tendency to separate into layers and its ability to disperse in excess water. Microscopic studies suggest that although bead mixtures exhibit size polydispersity, the average bead size is a strong function of neat SEBS, SEBS elastomer, and surfactant concentrations. Rheological studies suggest that all the bead mixtures exhibit shear thinning behavior, and the overall viscosity of a given bead mixture is a function of both SEBS elastomer and surfactant concentration. The developed SEBS elastic beads can be used as additives to enhance the viscoelastic properties of fluid-based systems such as magnetorheological and damping fluids.

Adsorbate-induced adatom formation on Au-Cu bimetallic alloys and its possible consequences for CO2 electroreduction

The adsorbate-induced formation of sub-nanometer clusters on transition-metal single crystals observed in previous high-pressure microscopic studies hinted at the in-situ formation of unique active sites even on large nanoparticle catalysts. We propose that the adatom formation energy can be used as an energetic descriptor for the initial step toward the adsorbate-induced metal-cluster formation process. This descriptor can be efficiently computed using density functional theory (DFT) calculations and applied for screening and identification of metal catalysts where this phenomenon may play an important role in generating active sites in-situ. As a proof of concept, here, we construct an adatom formation energy database for three AuxCuy alloys (x:y = 3:1, 1:1, or 1:3) and eighteen adsorbates (H, C, N, O, F, S, Cl, Br, I, CHx, NHx (x = 1 – 3), CO, NO, and OH) commonly involved in catalytic reactions. The energetics of adatom formation were examined in all cases where the (111) terrace, (211) step-edge, and (874) kink were the sources of the adatom. We demonstrate that the presence of an adsorbate could alter not only the energetics for adatom formation but also the elemental nature of the preferred adatom being formed. Using our database, we identified promising systems which favor adsorbate-induced adatom formation under near-ambient conditions. Specifically, CO-induced adatom formation on all three Au-Cu alloy surfaces could occur under CO2 electroreduction (CO2RR) conditions. This phenomenon offers a qualitative explanation for the experimentally observed CO2RR activity on Au-Cu alloy catalysts. Our methodology offers an easily expandable and efficient approach for large-scale catalyst screening with regards to adatom/cluster formation under reaction conditions and provides insight into the possible nature of active sites on alloy catalysts from a novel perspective.

Comparative Evaluation of Penetration Depth and Antimicrobial Efficacy of Calcium Hydroxide, MAS Paste, Nitrofurantoin, and Levonadifloxacin against Enterococcus faecalis: A Confocal Laser Scanning Microscopic Study

Abstract Aim: The most prevalent species in persistent and secondary infections linked to endodontic failure is Enterococcus faecalis. The objective of this in vitro investigation was to assess the antibacterial efficacy and penetration depth of calcium hydroxide, nitrofurantoin, levonadifloxacin, and a mixture of antibiotic and steroid paste (MAS paste) against E. faecalis. Materials and Methods: A total of 40 single-rooted tooth samples were decoronated apically and coronally to yield 10 mm root sections. All tooth samples were biomechanically prepared and were inoculated with E. faecalis bacteria for 21 days. The study involved four groups, each containing 10 teeth as follows: group 1—calcium hydroxide, group 2—MAS paste consisting of ciprofloxacin, metronidazole as antibiotics, and dexamethasone as corticosteroid, group 3—nitrofurantoin, and group 4—levonadifloxacin. For 7 days, the corresponding intracanal medications were injected into the canals. On the seventh day, dentinal debris was extracted from the blocked lumen to quantitatively evaluate the antibacterial activity of the experimental medications. The depth of penetration (DOP) of medicaments under study was assessed by viewing 1 mm thick horizontal sections under a confocal laser scanning microscope, one from each of the four subgroups. The sections were stained with florescent stain before being under the microscope. Results: Results showed that on day 7, the mean colony-forming units were lowest for levonadifloxacin, indicating the highest antimicrobial efficacy (P &lt; 0.05). This was followed by nitrofurantoin, MAS paste, and calcium hydroxide. Additionally, levonadifloxacin achieved the greatest DOP, followed by nitrofurantoin, MAS paste, and calcium hydroxide. These results suggest a correlation between DOP and antimicrobial efficacy. Conclusion: Within the confines of this study, it can be concluded that levonadifloxacin exhibited the highest antimicrobial efficacy, even at a low concentration of 8 µg/mL. Therefore, it can serve as a viable intracanal medicament in endodontic therapy.

Phase composition and microstructure of intermetallic alloys obtained using electron-beam additive manufacturing

The paper investigates the microstructure and phase composition of nickel- and aluminum-based intermetallic alloys obtained using two-wire electron-beam additive manufacturing (EBAM). Relevance of the research is related to the widespread use of intermetallic alloys based on nickel and aluminum (mainly Ni3Al) in various high-temperature applications and the need to use modern production methods when creating machine parts and mechanisms from these alloys. Using EBAM, the billets from intermetallic alloys with different ratios of the content of main components were obtained. Change in concentrations of the basic elements was carried out varying the ratio of feed rates of nickel and aluminum wires during additive manufacturing in the range from 1:1 to 3:1, respectively. The results of microscopic studies of the obtained alloys showed that, regardless of nickel content, the obtained alloys are characterized by a large–crystalline structure with grain sizes in the range of 100 – 300 μm for alloys with a component ratio of 1:1 and 150 – 400 μm for alloys with a component ratio of 2:1 and 3:1. At the same time, the alloy with an equal content of base components is characterized by more uniform grain and microstructure compared to those with high content of Ni. By changing the concentration ratio of the components, phase composition of the resulting billet can be purposefully controlled. In the case of an “equiatomic” content of the base components in the alloy, a NiAl-based compound with a small phase content based on the intermetallides Ni3Al5 and Ni3Al is formed. At high concent­rations of nickel, the intermetallic Ni3Al phase is formed, and at a component ratio of 3:1, structure of the resulting billet consists mainly of Ni3Al phase and the γ solid substitutional solution based on nickel. The paper demonstrates the possibility of direct production of intermetallic alloys with a given phase composition during electron-beam additive manufacturing.

The possible protective effect of ginger extract on toxic changes induced by bisphenol A on the thyroid gland of adult male albino rats: light and electron microscopic study.

Bisphenol A (BPA) is a chemical substance used in the plastic industry and considered as an endocrine disruptor. Ginger is a herbal material used in the food industry and has antioxidant activity. The present study was performed to evaluate the histological changes in the thyroid gland of adult male albino rats after intake of BPA and if there is any protective role for ginger extract (GE). Eighty adult male rats were divided equally into four groups. Group I as a control group, group II included rats that received 250 mg/kg/day GE orally for eight weeks, group III included rats that received 200 mg/kg/day BPA orally for the same period and group IV included rats that received BPA in the same dose for the same duration concomitantly with GE. At the end of the experiment, blood samples were taken for hormonal essay and tissue samples were processed. Light and electron microscopic studies were done. Morphometric and statistical studies were carried out. Group III showed degenerative changes in the thyroid gland, decreased serum levels of T3 and T4 and a strong positive inducible nitric oxide synthase (iNOS) immune response. Group IV showed restoration of thyroid gland architecture and function. In conclusion, GE protected the thyroid structure from the damaging effect of BPA oxidative stress through its anti-oxidant effect, thus preserving thyroid activity.