Micropore Specific Surface Area Research Articles

Exploring the Relationship Between Biochar Pore Structure and Microbial Community Composition in Promoting Tobacco Growth

The potential benefits of biochar, a carbon-rich substance derived from biomass, for enhancing agricultural yield and soil health have drawn increasing interest. Nevertheless, owing to the lack of specialized studies, the role of its poly-spatial structure in the success of fostering plant growth remains unclear. This study aimed to assess the effects of various biochar pore shapes on tobacco growth and the underlying microbiological processes. Three pyrolysis temperatures (250 °C, 400 °C, and 550 °C) were used to produce biochar from tobacco stems, resulting in different pore structures (T3 > T2 > T1). We then used BET-specific surface area (BET), t.Plot micropore specific surface area (t.Plot), mesopore specific surface area (MSSA), specific pore volume (SPV), average pore size (AP), and mesopore pore volume (MPV) measurements to evaluate the effects of these biochars on tobacco growth and biomass accumulation, and microbial analyses were performed to investigate the underlying mechanisms. When applied to plants, biochar increased their growth compared to untreated controls. The most notable improvement in tobacco growth was observed in the biochar produced at 400 °C (T3), which possessed the largest and most advantageous pore structure among all treatments. Further studies demonstrated that biochars with greater specific surface areas (BET, t.Plot, and MSSA) positively altered the abundance of key microbial taxa (e.g., Stenotrophobacter, Ensifer, Claroideoglomus) and community composition, thereby encouraging plant development and biomass accumulation. Conversely, greater pore volumes (SPV, AP, and MPV) inhibited microbial activity and significantly affected growth and biomass accumulation. Structural equation modeling further demonstrated that the pore structure of biochar greatly affected plant growth by changing the relative abundance and community composition of soil microbes. Maximizing the benefits of biochar in stimulating plant growth and improving soil microbial communities depends on optimizing the material’s pore structure, particularly by increasing the specific surface area. These findings will help expand the use of biochar in sustainable agriculture.

Effects of indigenous microorganisms on the CO2 adsorption capacity of coal

The adsorption capacity of coal is a crucial criterion for CO2 sequestration in deep unminable coal seams. Previous studies have documented how indigenous microorganisms interact with supercritical carbon dioxide (ScCO2) in coal. But how these interactions affect the adsorption capacity were rarely investigated. In this study, we treated bituminous coal samples with ScCO2-H2O and ScCO2-H2O-microorganism interactions in high-pressure reactors for 120 days at 35 °C and 10 MPa, respectively. After the treatments, we characterized both coal pore types and structures. The comparisons between two different post-treatments indicate that no significant change in coal pore types but notable alterations in pore structures are observed. Specifically, the treated coal with microorganisms exhibits a significant increase in micropore specific surface area (SSA) and surface roughness than the one without them. However, changes in meso/macropore structures and overall pore complexity of the coal sample treated with microorganisms were less pronounced than in coal sample treated with ScCO2-H2O alone. FTIR spectra analysis indicated that the absorption peak intensity of oxygen-containing groups and aliphatic functional groups in the sample treated with microorganisms decreased much more significantly than the sample treated without microorganisms. The CO2 adsorption capacity slightly increased in all treated samples at equilibrium pressures below 2.5 MPa. Above this pressure, the coal sample treated with microorganisms maintained a higher CO2 adsorption capacity, while the sample treated without microorganisms exhibited lower CO2 adsorption capacity compared to untreated coal sample. The increased SSA and the reduced oxygen-containing functional groups of coal after the treatment exerted antagonistic effects on CO2 adsorption. These findings suggest that indigenous microorganisms in coal seams affect CO2 adsorption through antagonistic effects, necessitating site-specific microbial assessments.

Supercritical Methane Adsorption Characteristics and Pore Structure Characteristics of Deep Middle Rank Coal

Abstract In order to accurately analyze the adsorption characteristics, pore structure, and fractal law of deep middle rank coal, high-pressure isothermal adsorption tests based on magnetic levitation high-pressure thermobalance and pore structure tests based on mercury intrusion method were carried out on coal samples collected from typical kilometer level deep wells. The fractal law of sponge model was studied. The results showed that: a. The weight method adsorption test showed “excess adsorption” phenomenon with the increase of equilibrium pressure, and the modified Gibbs surface excess adsorption theory was in line with the Langmuir adsorption model; b. The distribution of macropore volume in deep middle rank coal accounts for a dominant proportion of 57.44% to 62.47%, and the proportion of microporous specific surface area reaches 72.96% to 74.27%, indicating that microporous adsorption capacity is the strongest; c. The pore structure parameters and adsorption constants exhibit strong nonlinear characteristics.

Preparation and Characterization of Five Amino-Modified Hyper-Crosslinked Polymers and Performance Evaluation for Aged Transformer Oil Reclamation

Adsorption is intensively considered to be the most feasible and economical option for aged transformer oil treatment. In this work, five aminated hyper-crosslinked polymers were prepared from chloromethylated polystyrene–co-divinylbenzene (Cl-PS-DVB) through a two-stage modification of crosslinking and five different reagents aminating. After modification, the specific surface area (SBET) and nitrogen content (CN) of prepared resins were greatly improved. To evaluate the reclamation performance of resins for removing oxides and contaminants from aged transformer oils, the total acid number (TAN) and color of oils were mainly examined. The results shown that the prepared resins have superior oil reclamation capacity compared to commercial resin XAD-4 due to their higher microporous specific surface area (Smic) and surface polarity. Among them, the NHC-R3, which used dimethyltriamine (DETA) as an aminating agent, had the best deacidification and decolorization performance. A series of experiments were designed to investigate the optimal regeneration program conditions for NHC-R3, and the additional electrical characteristics of the reclaimed oil, including breakdown voltage, dielectric dissipation factor (DDF), and interfacial tension, were measured as evidence that aged oil was successfully reclaimed.

Pore evolution and reaction mechanism of coal under the combination of chemical activation and autothermal oxidation

Aiming at the limitation problems such as limited scope, high cost and energy consumption of coal bed penetration enhancement technology by traditional physical and chemical methods, a coal seam methane penetration enhancement method based on the combined action of chemical activation and auto thermal oxidation is proposed from the idea of utilizing the in-situ energy of the coal body. In this paper, N2 and CO2 adsorption, XPS and FTIR methods are used to study the pore structure evolution law and the change characteristics of the reactive structure of coal matrix under the effect of chemically activated autothermal oxidation. The synergistic microporous pore volume of chemical activation and auto thermal oxidation was 48.91 cm3/g−1 × 10-3, which was 28.96 % and 22.7 % higher than chemical activation and auto thermal oxidation respectively; The microporous specific surface area was 162.7 m2/g, which was 38 % and 26.6 % higher than chemical activation and auto thermal oxidation respectively. Activated coals expand and merge holes to a deeper degree after oxidative warming, and the complexity of the pore structure in the coal decreases; Highly reactive radicals in coal pores substantially promote the oxidation of coal structure, enhance the aromatic polymerization reaction of activated coal, and improve the maturity and aromaticity of activated coal, and the oxygen-containing functional groups in activated coal are negatively correlated with the oxidation temperature. The results of this study reveal the potential of the auto thermal oxidation-driven penetration enhancement method under chemical activation for coal seam gas penetration enhancement and extraction.

The effect of Ce promotor on catalytic performance of Zn/ZSM-5 in coaromatization of methanol and n-hexane

Ce modified Zn/ZSM-5 catalyst was prepared and the effect of Ce promotor on coaromatization of methanol and n-hexane was studied. The physical and chemical properties of Zn–Ce/HZ were tested by XRD, XPS, TEM, N2 adsorption-desorption and Py-FTIR. The loading of Ce tuned the acidity distribution and increased the LAS/BAS ratio, and mainly reduced the microporous specific surface area. Most of Zn and Ce elements entered the zeolite channels. The loading of Ce enhanced the interactions between Zn species and support and significantly increased the numbers of active centers of ZnOH+ species. Under the optimized conditions, the yield of aromatics was greatly improved from 25.2 % of HZ to 62.6 %. The reasons of deactivation were also analyzed. The higher the aromatization activity, the more the formed carbon deposit. The blockage of micropores and the greatly coverage of acid sites by carbon deposit thus resulted in poor catalytic performance.

Double-walled Al-based MOF with large microporous specific surface area for trace benzene adsorption.

Double-walled metal-organic frameworks (MOFs), synthesized using Zn and Co, are potential porous materials for trace benzene adsorption. Aluminum is with low-toxicity and abundance in nature, in comparison with Zn and Co. Therefore, a double-walled Al-based MOF, named as ZJU-520(Al), with large microporous specific surface area of 2235 m2 g-1, pore size distribution in the range of 9.26-12.99 Å and excellent chemical stability, was synthesized. ZJU-520(Al) is consisted by helical chain of AlO6 clusters and 4,6-Di(4-carboxyphenyl)pyrimidine ligands. Trace benzene adsorption of ZJU-520(Al) is up to 5.98 mmol g-1 at 298 K and P/P0 = 0.01. Adsorbed benzene molecules are trapped on two types of sites. One (site I) is near the AlO6 clusters, another (site II) is near the N atom of ligands, using Grand Canonical Monte Carlo simulations. ZJU-520(Al) can effectively separate trace benzene from mixed vapor flow of benzene and cyclohexane, due to the adsorption affinity of benzene higher than that of cyclohexane. Therefore, ZJU-520(Al) is a potential adsorbent for trace benzene adsorption and benzene/cyclohexane separation.

Pre‐Oxidating and Pre‐Carbonizing to Regulate the Composition and Structure of Coal Tar Pitch: The Fabrication of Porous Carbon for Supercapacitor Applications

AbstractThe capacitive properties of supercapacitors highly rely on the reasonable design of high‐performance electrode materials. Herein, a synergetic strategy of pre‐oxidation and pre‐carbonization is proposed to prepare coal tar pitch (CTP) based porous carbon. The formation mechanism of porous carbon is revealed. Pre‐oxidation increases the heteroatom content and promotes the decomposition of polycyclic aromatic hydrocarbons into small molecules, which is more conducive to improving the subsequent activation and enhancing the microporous specific surface area. Also, the autoclave pre‐carbonization promotes the polymerization of the precursors and increases the carbon yield. Benefiting from the synergistic effect of pre‐oxidation and pre‐carbonation, the obtained carbon exhibits a superior specific capacitance of 365 F g−1. Meanwhile, ZnCl2 is used as a hydrogen‐bonding acceptor to synthesize ZnCl2‐EG/PVA deep eutectic solvent (DES) gel, and it is applicable to acidic, neutral, and alkaline electrolytes. The capacitor assembled with the prepared porous carbon and DES gel electrolyte achieves a high energy density of 41.3 Wh kg−1 and works well in unconventional temperatures (−40–75 °C). This work confirms the effect of pre‐oxidation and pre‐carbonization on the fabrication of CTP‐based carbon material and expects to prepare porous carbon using other pre‐oxidation/carbonization agents.

Experimental investigation on pore characteristics of vitrain and durain in low rank coal based on fractal theory

The macro petrographic compositions and its pore characteristics of coal reservoir play critical role in the accumulation and development of coalbed methane (CBM). In this paper, the pore characteristics of vitrain and durain were analyzed through the experiment and fractal theory. The results indicated that the micropores and microfractures develop in vitrain, and that transitional pores develop in durain. The pore volume and specific surface area (SSA) of vitrain are larger than those of durain, with the micropore SSA of vitrain being 35% higher than that of durain. The threshold pressure and tortuosity of vitrain are greater than that of durain, but the mean pore size of vitrain is smaller than that of durain. The fractal dimension D1 of vitrain is greater than that of durain, while the fractal dimension D2 is opposite, indicating that the pore surface of vitrain is coarser, and the pore structure of durain is more complex. The fractal dimension Dk of vitrain is larger than that of durain, the mean fractal dimension Ds of vitrain is smaller than that of durain, which shows that the diffusivity of vitrain is weak but the seepage capacity is strong due to the developed fractures. The difference in material composition and pore characteristics between vitrain and durain provides a new understanding for the development of CBM in low rank coal.

Preparation of Nanoporous Carbon from Rice Husk with Improved Textural Characteristics for Hydrogen Sorption

This study proposes a method to control the pore-forming process by performing preliminary mechanical activation of the initial rice husk before carbonization. Preliminary mechanical activation of the initial rice husk leads to the loosening of the intercellular substance and its partial depolymerization, thereby increasing the availability of its internal structure for pore formation during carbonization and chemical activation. Using the method described above, nanoporous carbon was obtained with a Brunauer–Emmett–Teller (BET)-calculated specific surface area of 2713 m2/g, a micropore specific surface area calculated by using the Dubinina–Radushkevich (D-R) method of 3099 m2/g, and a total pore volume calculated by using the Barett–Joyner–Halenda (BJH) method of 1.625 cm3/g. Due to these characteristics, the adsorption capacity in the obtained sample was for hydrogen 3.7 wt.% at a temperature of −190 °C and a pressure of 9 kgf/cm2, which is 29.7% higher than the adsorption capacity of nanoporous carbon obtained based on rice husk without mechanical activation. The composite “carbon–platinum” NC-2/Pt10%, at a temperature of 20 °C and a pressure of 9 kgf/cm2, showed an increase in sorption capacity of 27% compared to pure nanoporous carbon NC-2, which is explained by the emergence of the spillover effect.

Microbial Conversion of Sulfur-Containing Compounds Contributed the Natural Biodegradation of Bituminous Coals

Microorganisms can affect coal biodegradation by driving elemental biogeochemical cycling. A detailed description of the sulfur conversion process led by indigenous bacteria during coal degradation is important. This study obtained sulfur-containing compounds conversion bacteria through indoor enrichment and conducted anaerobic culture experiments using coal supplemented with enriched bacteria. The study showed that the addition of enriched bacteria changed the microbial composition, particularly the microbial groups within Pseudomonadota and Bacillota. In addition, the sulfur-containing compounds conversion bacteria increased the pore volume and specific surface area of micropores (<10 nm) and transition pores (10–100 nm), as well changed the content of sulfur-containing organic components including polypeptides, aromatic compounds, alkyl compounds, and thiazoles. The genera related to inorganic sulfur conversion were mainly belonging to Bacillota and Actinomycetota. Additionally, functional genera that can degrade sulfur-containing organic compounds of dibenzothiophenes through the ring-opening of benzene rings were found within Pseudomonadota, Bacillota and Actinomycetota. In summary, organic sulfur-related Pseudomonadota, Bacillota and Actinomycetota and inorganic sulfur-related Bacillota and Actinomycetota detected in this study could accelerate the sulfur-containing compounds conversion and ultimately increase micropores in coal, and this holds great significance for understanding the biogeochemical cycling process of coal.

Construction of aldehyde-based, ester-based hyper-cross-linked polar resin and its selective adsorption mechanism for phenol in coal chemical wastewater

Efficient and precise recovery of phenol from coal chemical wastewater (CCW) poses a significant challenge, prompting the development of a novel aldehyde-based, ester-based hyper-cross-linked polar resin (DES–COOC–CHO) in this study. Two distinct functional group modification methods were employed to enhance the screening effect of the resin. SEM, FT-IR, NMR, XPS, and BET characterizations confirmed the successful construction of the hyper-cross-linked polar resin, incorporation aldehyde and ester groups, exhibiting a special surface area of 627.2 m2/g and a microporous specific surface area percentage of 29.94%. DES–COOC–CHO adhered to the pseudo-second-order kinetic model and Langmuir model (maximum adsorption capacity of 118.0 mg/g). Its adsorption of phenol was spontaneous chemisorption, monolayer adsorption. Notably, even after undergoing 20 adsorption–desorption cycles, the resin maintained a stable adsorption capacity, showcasing excellent recoverability. In the presence of phenols sharing similar properties, DES–COOC–CHO exhibited superior selectivity for phenol. In real CCW, it achieved a remarkable 90% selective removal rate of phenol. The primary selective mechanism relied on the hydrogen bonding effect facilitated by aldehyde and ester groups, coupled with microporous sieving of appropriate size. In comparison with other adsorbent materials, DES–COOC–CHO exhibited superior adsorption properties, coupled with a cost-effective preparation process, presenting significant potential for practical applications.

Nano-Scale Pore Structure Characterization and Its Controlling Factors in Wufeng and Longmaxi Shale in the Zigong Area, Southwest Sichuan Basin

The nano-scale pore systems in shale reservoirs control shale gas transportation and aggregation, which is of great significance for the resource evaluation of shale oil and gas and the selection of a “sweet spot”. Taking twelve marine shale samples from the Wufeng–Longmaxi Formation in the Zigong area, southwest Sichuan Basin, as the research target, we carried out a series of experiments, including total organic carbon (TOC) analysis, X-ray diffraction (XRD), gas adsorption (CO2 + N2), and mercury intrusion porosimetry (MIP), to study the full-scale pore structure characterization and controlling factors of pore volume and specific surface area. The results presented the following findings. (1) Marine shale samples from the target area are rich in organic matter, with an average TOC value of 3.86%; additionally, the mineral composition was dominated by quartz and clay minerals, with average contents of 44.1% and 31.4%, respectively. (2) The full-scale pore size distribution curves of pore volume developed multimodally, with the main peaks at 0.5 nm–2 nm, 3 nm–6 nm, and 700 nm–2.2 um; moreover, the full-scale pore size distribution curves of a specific surface area developed unimodally, with the main peak ranging from 0.5 nm to 1.2 nm. (3) Pore volume was mainly contributed by mesopores and macropores, with an average contribution of 46.66% and 42.42%, respectively, while the contribution of micropores was only 10.91%. The specific surface area was mainly contributed by micropores and mesopores, with an average contribution of 64.63% and 29.22%, respectively, whereas the contribution of micropores was only 6.15%. (4) The TOC content mainly controlled the pore volume and specific surface area of micropores and mesopores, while the clay and feldspar content generally controlled the pore volume and specific surface area of macropores. Additionally, the quartz content had an inhibitory effect on the development of all pore types. These results will help researchers understand the laws of gas accumulation and migration.

INFLUENCE OF TECHNOLOGICAL PARAMETERS ON THE COMPOSITION AND PROPERTIES OF PETROLEUM COKE

This study is devoted to studying the complex process of producing coke from heavy oil residues using previously developed experimental approaches and using analytical methods of analysis. The purpose of the study is to produce low-sulfur coke by thermal processing of heavy oil residues in the presence of waste motor oils. The resulting coke was analyzed by various physicochemical methods. The composition and structure of the resulting coke were studied using Raman spectroscopy methods. As a result of the analysis, the predominance of polyaromatic compounds and olefins in the coke composition was revealed. Electron microscopy techniques provided a visual representation of the microstructure and morphology of coke samples obtained both in the presence and absence of a recycling agent. Significant results were obtained by measuring the specific surface area of coke, which highlight the significant influence of temperature fluctuations on its characteristics of coke. It is noteworthy that the specific surface area of micropores varies significantly – from 16 to 600 m2/g. The results of the analysis of sulfur content showed the possibility of its thermal dehydration, which should lead to an improvement in the quality of coke. In addition, it has been shown that conducting the experiment in the presence of a recycling agent significantly increases the yield of coke and opens up prospects for more efficient use of heavy oil residues. Taken together, the results provide valuable insight into the intricacies of producing low-sulfur coke from heavy petroleum residues. In addition to industrial significance, this research also has environmental significance, since it proposes an approach that allows not only to maximize the use of secondary resources, but also to reduce the sulfur content in coke, which will help limit the environmental impact of industrial processes.

Experimental Investigation on Pore-Fracture Variations in Coal Affected by Carbon Disulfide.

Solvent treatment is an effective technique to stimulate pore and fracture growth in low-permeability coal seams and improve the efficiency of methane extraction. Adopting the nuclear magnetic resonance test, liquid nitrogen adsorption analysis, ultrasonic test, and CT scanning, pore variation and fracture development in lignite, bituminous coal, and anthracite after carbon disulfide treatment were analyzed. Full-scale pore size distribution characteristics were obtained. The Frenkel-Halsey-Hill model was adopted to analyze pore fractal properties. Experiment results show that carbon disulfide could increase coal porosity. Lignite showed the best pore alteration effect, with a porosity increase of 34.10%, followed by bituminous coal with a porosity increase of 14.55%, while anthracite had a slightly weaker change with only 0.91% porosity growth. The pore diameter distribution range of treated coal expanded from 0-450 to 0-1000 μm. The average pore diameter rose from 316 to 483 μm, with better connectivity between pores. After treatment, the proportions of micropore specific surface areas (SSA) in three coal samples decreased but the ratios of small pore and medium pore SSA increased. Fractal dimension D1 of lignite and bituminous coal decreased by 5.669 and 0.054%, while D1 of anthracite increased by 22.407%. D2 reduced by 0.599, 3.143, and 1.262%, respectively. Raw coal had the maximum porosity near both ends of the CT section. Porosity of lignite was the largest at the ends after treatment. Surface porosity inside coal samples also rose from about 0.1 in raw coal to approximately 0.4 after treatment. Ultrasonic velocity in lignite decreased by 50.16% due to solvent treatment. Increases in ultrasonic attenuation coefficient α and ultrasonic attenuation ratio β indicate good fracture development. Furthermore, development degrees of lignite and bituminous coal are higher than that of anthracite. Results of the above methods verify with each other, indicating the effectiveness of carbon disulfide treatment in improving pore and fracture structures. The outcomes of this research could offer a theoretical basis for chemical permeability-enhancement technology.

Study on the effect of high temperature heat treatment of H2 on the pore structure of activated carbon

As a high-quality adsorbent, activated carbon is widely used in air purification, natural gas storage, sewage treatment, gas enrichment, and separation, etc. The pore microstructure of activated carbon directly affects the adsorption capacity. In this paper, the altered in the microstructure of activated charcoal before and after high-temperature treatment were investigated by high-temperature thermal treatment of activated charcoal at 600°C and 700°C under an H2 atmosphere. The results of low-temperature (77 K) nitrogen adsorption showed that after high-temperature H2 heat treatment, the pores of activated carbon would be ablated and the pore structure would be significantly changed. The specific surface area, micropore specific surface area, total pore volume, and micropore pore volume all increased, and the degree of enhancement was proportional to the temperature of the heat treatment. The pore size distribution of activated charcoal before and after heat treatment was analyzed by density functional theory, and it was concluded that the pore volume of activated carbon mesopores (2-4 nm) increased significantly after high-temperature heat treatment, which could effectively improve the adsorption and separation capacity of activated carbon in larger molecular systems.

Effect of particle size on CO adsorption and thermodynamic analysis

The liquid nitrogen adsorption method was used to characterize the pore structure of non-cohesive coal in the 061,404 working face of the Lingxin coal mine. The amount of specific surface area of micropores in the sample continuously rose as particle sizes reduced. The volumetric method was used to measure the CO isothermal adsorption curves of three samples (sample I, 0.425–0.25 mm, sample II, 0.18–0.25 mm, and sample III, 0.15–0.18 mm). The experimental results were fitted by the Langmuir model. According to the experimental results, it was conducive to CO adsorption with the conditions of high pressure and low-temperature. The decrease in grain diameter increased the number and volume of micropores in the sample, which improved the adsorption capacity of the sample. In addition, according to the adsorption data, the CO adsorption thermodynamics of three samples were analyzed, including surface potential (Ω), Gibbs free energy change (ΔG) and entropy change (ΔS). The results demonstrated that CO adsorption by coal was a spontaneous process. Sample III has the most substantial adsorption capacity, whereas the sample I has the weakest adsorption capacity.

Preparation of a High-Silicon ZSM-5 Molecular Sieve Using Only Coal Gangue as the Silicon and Aluminum Sources.

The traditional preparation of ZSM-5 molecular sieves relies on chemical reagents to provide silicon and aluminum sources, which are limited as raw materials and cannot be commonly used in production practice. Using coal gangue as the raw material and using medium-temperature chlorination roasting and the pressure acid leaching process to control the silicon-aluminum ratio [n(Si/Al)] of coal gangue, a ZSM-5 molecular sieve was prepared using the alkali melting hydrothermal method. The pressure acid leaching process solved the limitation that kaolinite and mica cannot simultaneously be activated. Under optimal conditions, the n(Si/Al) of the coal gangue increased from 6.23 to 26.14 and complied with the requirements for the synthesis n(Si/Al) of a ZSM-5 molecular sieve. The effect of n(Si/Al) on the preparation of the ZSM-5 molecular sieve was studied. Finally, spherical granular ZSM-5 molecular sieve material with a microporous specific surface area of 169.6329 m2/g, an average pore diameter of 0.6285 nm, and a pore volume of 0.0988 cm3/g was prepared. Providing ideas for the high-value utilization of coal gangue, it is significant for solving the problem of coal gangue solid waste, as well as the problem of ZSM-5 molecular sieve feed stock.

Insights on the dual role of low-rank coal with high mineral catalysis index (LRC-HMCI) during blending coal for activated carbon production and low-temperature NH3-SCR of NO

The mineral catalysis index (MCI), reflecting the activity of mineral composition in coal, could be used as a meaningful reference to indicate the coal’s application potential. To elucidate the role of low-rank coal with high MCI (LRC-HMCI) on the AC preparation and application, in this investigation, ACs are produced by steam activation after blending Fugu (F) coal, Yangchang (Y) coal and Xiangyuan (X) coal. The as-prepared ACs’ textural evolution and performance were investigated by a series of characterization and low-temperature NO removal tests. The results show that LRC-HMCI promotes the as-prepared AC’s weight loss and burn-off and lowers its yield. The LRC-HMCI could promote the generation of micropores and the transformation from micropores to mesopores/macropores. 6Y-1X-3F-AC’s total BET specific surface area and micropore specific surface area is up to 880 m2/g and 629 m2/g, and the total volume reaches 0.42 cm3/g. LRC-HMCI decreases the AC’s graphitization degree. Meanwhile, LRC-HMCI favors incrementing as-prepared AC’s COO, CO and π–π*. LRC-HMCI also enhances NO removal, and 7Y-1X-2F-AC shows the highest denitrification activity. 2 h’s NO removal rate reaches 45.5%, which is 77.1% higher than 25.7% of Y-AC. The enhanced denitrification is mainly due to the dual role of LRC-HMCI: LRC-HMCI optimizes micropore porosity and improves the surface chemistry properties of AC, which eventually promote the NO and NH3 adsorption; Minerals from LRC-HMCI, particularly Fe-, Ca-, Mg- containing components, could catalyze the NH3-SCR reaction, thus improves the NO removal. The results of this research could guide cost-effective and high-performance AC production through coal blending based on MCI.

Full-scale pore characteristics in coal and their influence on the adsorption capacity of coalbed methane.

Coalbed methane (CBM) is primarily stored and transported through the pores in the coal matrix, making it essential to study the development of different scales of pores in coal to better understand the evaluation and exploration of CBM. In this study, four coal samples of varying ranks (Ro,max = 0.68%-2.86%) were selected, and different scale pores were obtained through low-pressure CO2 and Ar adsorption (LP-CO2/ArGA) and mercury intrusion porosimetry (MIP) experiments. A full-scale pore evaluation model was established, and the impact of pores on methane adsorption and restriction was analyzed and discussed through high-pressure adsorption experiments. Our results show that (1) at high pressures (> 100 MPa), the MIP technique caused pore compression and overestimated the pore size below 30 nm by up to 47.2%; (2) to obtain a comprehensive pore evaluation, we developed an accurate model that combines LP-CO2/ArGA with NLDFT and BJH and NLDFT models to determine micropore (0.3-1.5 nm) and mesopore (1.5-30 nm) parameters. By combining this model with MIP test results, we can obtain a full-scale pore size in the range of 0.3 nm-200 μm; (3) coal rank affected the development of full-scale pore characteristics. As coal rank increased, the specific surface area (SSA) of micropores and adsorption capacity of methane first decreased, then increased. Micropores were found to be the most important storage space for CBM and control gas adsorption, with a microporous SSA and PV to total SSA and total PV ratio of 97.93% and 63.69%, respectively. (4) We also observed a significant linear relationship between the fractal dimension of micropores and the Langmuir volume (VL) based on fractal theory. As the fractal dimension increased, VL also increased (R2 = 0.8581), indicating that VL is controlled by the complexity of micropores, which is consistent with the comprehensive evaluation index (Dt) and VL (R2 = 0.8744). Based on our predicted model, VL can be estimated using the SSA of micropores and Dt. Our findings shed light on the relationship between pore morphology and CBM occurrence and have practical implications for fields such as catalytic synthesis, E-CBM, and gas purification.