Sinks Of Microplastics Research Articles

Urban natural wetland as a sink for microplastics: A case from Lalu Wetland in Tibet, China

Microplastics have been reported in a wide range of aquatic habitats. The wetlands are considered to be important roles in microplastic migration in water bodies. Nevertheless, knowledge about the occurrence and fate of microplastics in urban natural wetland is still limited for us to better understand how they become a sink of microplastics. In this study, the distribution and characteristics of microplastics in surface water, surface sediments, and sediment cores of the Lalu Wetland watershed, China's highest urban wetland, were investigated in August 2020 and January 2021. The abundances of microplastics in the surface water were 0.06–3.05 MPs/L. Microplastic abundance in the surface sediment and sediment core was 0.01–1.10 MPs/g and 0–16.23 MPs/g, respectively. The abundance of microplastics in the water was significantly lower in the wetland than that in the channel in the watershed. Comparing the wetland inlet and outlet water, the microplastic interception rates were 53% in January and 95% in August. The characteristics and seasonal variation of microplastics in the Lalu Wetland implied that urban natural wetlands were good at intercepting microplastics, and vegetation growth might play an important role on the interception of microplastics by the wetland. The increasing of microplastics from bottom to top in the sediment cores of Lalu Wetland also indicated that the ecological risks of microplastics accumulation in sediments of urban natural wetland required further attention.

Abundance of Microplastics in Wastewater Treatment Sludge

Wastewater treatment plants (WWTPs) have been regarded as feasible interceptors of microplastics, which have now contaminated all spheres of the environment. The microplastics removed from WWTPs are frequently trapped in the sludge produced. This article aims to examine the abundance of microplastics in the sludge of WWTPs in different regions by reviewing the relevant scholarly papers published between 2016 to 2022. The papers were retrieved from three databases, namely Web of Science, Scopus, and ScienceDirect. WWTPs receive influents containing microplastics whose abundance differs significantly in relation to the population density, urbanization level, and land use of the areas served. Depending on the water treatment strategies and the efficiencies of the WWTPs, a large proportion of the microplastics in the influents is trapped in the sludge, giving a common sludge-to-influent abundance ratio of 0.02 to 0.77, though a ratio of 3.4 has been reported for recycled activated sludge. Sludge treatment affects the final abundance of microplastics therein. However, a relationship between the abundance of microplastics in influents and that in sludge cannot be established. The reutilization of sludge as fertilizer introduces microplastics back into the environment and significantly compromises the potential of WWTPs as interceptors and sinks of microplastics. This review calls for strategies and technologies to reduce, if not remove microplastics in the sludge of WWTPs. It suggests that future research could take this path to optimize the role of WWTPs as sinks of microplastics. Doi: 10.28991/HEF-2022-03-01-010 Full Text: PDF

Size/shape-dependent migration of microplastics in agricultural soil under simulative and natural rainfall

Agricultural soil is a sink of microplastics (MPs) in the environment. MPs in topsoil can be transferred deeply or into surrounding water by rainfall. However, little is known about rainfall-induced migration pattern of different MPs in agricultural soil. In this study, soil leaching experiments of 21 d were performed on Nile red-stained size-different polyethylene terephthalate (PET) particles, and shape-different polyethylene (PE) MPs under simulated or natural rainfall. Results showed that simulated rainfall of 5–25 mm/d caused intensity-dependent migration of MPs in horizontal and vertical directions. Maximum migration depth of MP particles arrived up to 4–7 cm. Rise of soil slopes could significantly increase horizontal mobility of MPs. Comparatively, natural rainfall of similar intensity caused relatively high mobility of MPs. Moreover, under both simulative and natural rainfall, mobility of MPs presented size/shape-different characteristics. Comparatively, small-size MPs (especially <1 mm) showed relatively high mobility in horizontal or vertical direction, and had high-frequency presence in runoff water. Of four MPs' shapes, fiber and film had relatively high mobility in comparison to particles. These results indicate that rainfall can cause size/shape-dependent migration of MPs in agricultural soil. It suggests size/shape-different environment fate of MPs, and provides a reference for MP control.

Eelgrass (Zostera marina) and its epiphytic bacteria facilitate the sinking of microplastics in the seawater

Marine microplastics have received considerable attention as a global environmental issue. However, despite the constant accumulation of microplastics in the ocean, their transport processes and mechanisms remain poorly understood. This study investigated microplastics in the sediments of seagrass meadows and nearby regions without seagrass along the Shandong coast and found that the sediment in the seagrass meadows was a sink for microplastics. Subsequently, we evaluated the influence of eelgrass (Zostera marina), a common coastal seagrass, on the sedimentation of suspended polystyrene microplastics. The results showed that 0.5, 1.0, and 2.0 g/L eelgrass leaves decreased the abundance of microplastics in seawater in a dose-dependent manner over a period of 3–48 h under shaking conditions at 120 rpm at 22 °C. After 48 h of shaking, microplastic abundances in the 0.5, 1.0, and 2.0 g/L eelgrass groups significantly decreased by 46.9%, 53.1%, and 88.4%, respectively. Microplastics can adhere to eelgrass leaves and form biofilms, which promoted the formation of white floc that traps the suspended microplastics, causing them to sink. Furthermore, two epiphytic bacteria (Vibrio and Exiguobacterium) isolated from the eelgrass leaves decreased the abundances of suspended microplastics by 95.7% and 94.5%, respectively, in 48 h by accelerating the formation of biofilms on the microplastics. Therefore, eelgrass and its epiphytic bacteria facilitated the sinking of microplastics and increased the accumulation of microplastics in the sediments of seagrass meadows in coastal regions.

The long road to determine microplastic trends in a Baltic Sea catchment

The long road to determine microplastic trends in a Baltic Sea catchment The multidisciplinary MicroCatch_Balt project determines inland sources and sinks of microplastics and models the relevant fate processes on its pathways to the open Baltic Sea within the exemplary Warnow catchment area. It covers the most significant aspects of microplastic contamination in Northern Germany—from limnic to marine systems— providing expertise to support stakeholders in designing future monitoring or mitigation strategies.

Effects of virgin microplastics on the transport of Cd (II) in Xiangjiang River sediment

River sediments are considered as sinks of microplastics (MPs). Although numerous studies have been conducted on MPs pollution in river sediments, the impact of MPs on the environmental behavior of Cd (II) in river sediments is still unknown. In this work, the effects of six MPs (polyethylene, polypropylene, polystyrene, polyvinyl chloride, polymethyl methacrylate and polylactic acid) on the adsorption of Cd (II) by Xiangjiang River sediment and the transport of Cd (II) in sediment were studied. The results showed that the adsorption ability of sediment to Cd (II) decreased with the increase of the content of MPs in sediment. When the content of MPs in sediment increased to 10%, polypropylene had the greatest effect on the adsorption affinity of sediments to Cd (II). Moreover, the addition of MPs accelerated transport of Cd (II) in sediment, and the transport of Cd (II) in sediment increased with the increase of the content of MPs. The reason may be that after adding MPs, the adsorption capacity of sediment to Cd (II) decreases, and the mass transfer resistance of Cd (II) to sediment reduces, which leads to faster transport of Cd (II) in sediment. Especially, when the content of MPs in sediment increased to 10% (w/w), the saturation point of the breakthrough curve decreased by about 70 pore volumes. This work hopes to provide helpful views on the environmental behavior and risk assessment of Cd (II) in the presence of MPs.

Spatiotemporal distribution of microplastics in surface water, biofilms, and sediments in the world's largest drinking water diversion project

Investigations of microplastics have increased exponentially over the past decade, yet no information is currently available on the status of microplastics in strictly regulated, artificial bodies of water. The Middle Route of the South-to-North Water Diversion Project (SNWDP) in China, a highly regulated canal, supplies water to 19 cities and more than 53.10 million residents since 2014, as part of the world's largest inter-basin drinking water diversion project. In this study, the spatiotemporal distribution, characteristics, and polymer types of microplastics were surveyed for the first time in the Middle Route of the SNWDP. On average, microplastics were distributed at abundances of 516 items m−3 in water, 20 items kg−1 in biofilms (wet weight), and 24 items kg−1 in sediments (wet weight), lower than that in other typical inland waters. Both sites and seasons significantly affected microplastic abundance in water, biofilms, and sediments; microplastic abundance in water was also significantly positively correlated with distance to the headwork. The main microplastics in the canal were small (0.05–1 mm) polyethylene terephthalate (PET) fibers. Interestingly, microplastics were concentrated in biofilms, indicating that biofilms could serve as a sink for microplastics in the canal. Vehicular harvester was used to demonstrate the practicality of biofilm harvest to mitigate contamination with microplastics. Our results showed that microplastics are consistently transported long distances through the canal, biofilms play an important role in the fate of microplastics in the canal, and that biofilm harvest could be potentially used to mitigate microplastic pollution.

Salt marsh sediments act as sinks for microplastics and reveal effects of current and historical land use changes

Microplastic particles are widespread in marine sediments and the abundance of the different types of particles vary widely. In this paper we demonstrate that salt marshes effectively capture microplastics in their sediments, and that microplastic accumulations increase with the level of urbanization of the land surrounding estuarine areas. We extracted microplastics from sediment cores in salt marshes of SE New England estuaries at different degrees of urbanization and land use intensity. Microplastics were present everywhere, but their abundances increased markedly with the degree of urbanization of the land. Microplastic fragment counts were linked to nearby urbanization and their abundances seemed to be linked to more local, within-watershed inputs. The number of fibers was similar across all sites suggesting that fiber accumulation in these sediments is likely influenced by effective long-distance transport from large-scale areas. The sedimentary record confirmed that microplastics have been accumulating in these estuaries since the early 1950s, and their abundances have increased greatly in more recent years in response to the progressive urbanization of the watersheds and intensification of land uses. Our results highlight the role of salt marsh sediments as sinks for microplastics in the marine environment.

Microplastics particles in seafloor sediments along the Arabian Sea and the Andaman Sea continental shelves: First insight on the occurrence, identification, and characterization

Microplastics (MPs) are widely-recognized contaminants and marine sediments act as a sink of MPs and therefore may cause a potential threat to benthic communities. We aim to analyze the MPs abundances and characteristics in the seafloor sediments from the continental shelves of the Arabian and Andaman seas. Twenty-two seafloor sediments were collected from 8 and 14 locations of the Arabian and Andaman seas, respectively. MPs concentrations varied from not detected (ND) to 267 particles kg−1 with mean values of 128.02 ± 33.92 and 15.36 ± 2.61 particles kg−1, respectively for the Arabian and Andaman seas. Among different shapes, fiber had the highest distribution over fragments and pellet. FT-IR analysis revealed acrylic was most dominant polymer, followed by polyethylene, and nylon. Mean MP concentration at the Arabian Sea was significantly higher (p < 0.001) than in the Andaman Sea. The present study revealed the wide-spread occurrence of MPs throughout the Indian seas.

Benthic fauna contribute to microplastic sequestration in coastal sediments

Microplastics are ubiquitous in the marine environment, however, the mechanisms governing their uptake by, and burial within, seabed habitats are poorly understood. In this study, microplastic burial and its impact on fauna-mediated sedimentary processes was quantified at three coastal sites, and the potential contribution of burrowing faunal communities to this process assessed via functional trait diversity analysis of field data. In addition, laboratory exposures were used to assess whether sediment-processing undertaken by the brittlestar Amphiura filiformis, a key species in the sampled area, could explain the burial of microplastic fibres. Field observations confirmed broad-scale burial of microplastics across the coastal seabed, consistent across sites and seasons, with microplastic sequestration linked to benthic-pelagic exchange pathways, driven by burrowing fauna. Brittlestars were observed to bury and line their burrow walls with microfibres during experiments, and their burial activity was also modified following exposure to nylon fibres, relative to controls. Collectively, these results indicate that biodiverse and functionally important seabed habitats act as microplastic sinks, with burrowing fauna contributing to this process via well-known benthic-pelagic pathways, the rates of which are modified by plastic exposure.

Effects of biofilm colonization on the sinking of microplastics in three freshwater environments

Microplastics (MPs) have frequently been detected in freshwater environments, and there is growing concern about their ecological effects, especially the influence of the “plastisphere” on the freshwater ecosystems. The colonization of microbes on MPs would significantly alter their transport behavior, i.e., buoyancy, in fresh water. In this research, we studied the effects of biofilm colonization on the sinking and floating of three MPs, i.e., polyethylene terephthalate (PET), polypropylene (PP), and polyvinyl chloride (PVC), after 44 days of incubation in three freshwater systems (the Niushoushan River, the Qinhuai River, and East Lake) in China. The results showed that the biofilms attached to the three MPs contained different biomass and chlorophyll-a levels were related to water environmental conditions and physicochemical properties of MPs, based on redundancy analysis. Generally, PET and PVC sinking, with density higher than water, tended to increase after biofilm formation. Thereafter, the settling velocity of biofouled PET and PVC squares became faster than that of the virgin ones. In summary, our study suggested that biofouling does affect the sinking of MPs in fresh water and consequently influences the transport behavior and the distribution characteristics of MPs in freshwater environments, and this issue deserves more scientific attention.

Interaction of cyanobacteria with calcium facilitates the sedimentation of microplastics in a eutrophic reservoir

Low-density microplastics are frequently found in sediments of many lakes and reservoirs. The processes leading to sedimentation of initially buoyant polymers are poorly understood for inland waters. This study investigated the impact of biofilm formation and aggregation on the density of buoyant polyethylene microplastics. Biofilm formation on polyethylene films (4 × 4 × 0.15 mm) was studied in a eutrophic reservoir (Bautzen, Saxony, Germany). Additionally, aggregation dynamics of small PE microplastics (~85 µm) with cyanobacteria were investigated in laboratory experiments. During summer phototrophic sessile cyanobacteria (Chamaesiphon spp. and Leptolyngbya spp.) precipitated calcite while forming biofilms on microplastics incubated in Bautzen reservoir. Subsequently the density of the biofilms led to sinking of roughly 10% of the polyethylene particles within 29 days of incubation. In the laboratory experiments planktonic cyanobacteria (Microcystis spp.) formed large and dense cell aggregates under the influence of elevated Ca2+ concentrations. These aggregates enclosed microplastic particles and led to sinking of a small portion (~0.4 %) of polyethylene microplastics. This study showed that both sessile and planktonic phototrophic microorganisms mediate processes influenced by calcium which facilitates densification and sinking of microplastics in freshwater reservoirs. Loss of buoyancy leads to particle sedimentation and could be a prerequisite for the permanent burial of microplastics within reservoir sediments.

Seasonal variation and risk assessment of microplastics in surface water of the Manas River Basin, China

The ubiquity of microplastics in the environment has caused great influence to ecosystems and seriously threatened human health. To better understand the variation in microplastics in different seasons in an inland freshwater environment and determine the sources of microplastic pollution and its migration features, this study investigated the characteristics of microplastic pollution during dry (April) and wet (July) seasons in surface water of the Manas River Basin, China. The size, color, shape, area distribution and compound composition of microplastics were studied. Moreover, the risk of microplastic contamination was explored based on risk assessment models. The results demonstrated that the degree of pollution caused by microplastic abundance was minor in this study area. The average abundance of microplastics in April (17 ± 4 items/L) was higher than that in July (14 ± 2 items/L). The range in the abundance of microplastics in April and July were 22 ± 5–14 ± 3 items/L and 19 ± 2–10 ± 1 items/L, respectively. Highly hazardous polymers such as Polyvinyl chloride (PVC) and Polycarbonate (PC) have a significant impact on the results of the evaluation of the presence of microplastics. This study is an important reference for understanding the characteristics of the seasonal variation in microplastics in inland freshwater environments and has practical significance, as it will allow relevant agencies to accurately assess the pollution level of microplastics in different seasons. It is of practical significance to understand the sources and sinks of microplastics in inland freshwater environment.

Towards Characterising Microplastic Abundance, Typology and Retention in Mangrove-Dominated Estuaries

Plastic and, particularly, microplastic (MP) pollution is a growing research theme, dedicated largely to marine systems. Occurring at the land–sea interface, estuarine habitats such as mangroves are at risk of plastic pollution. This study compared MP pollution (level, morphotype, polymer composition, size and colour) across four South African estuaries, in relation to the built and natural environment. Mouth status, surrounding human population densities and land-use practices influenced the level and type of MP pollution. Systems that were most at risk were predominantly open estuaries surrounded by high population densities and diverse land use types. Microplastic levels and the diversity of types detected increased with increasing levels of anthropogenic disturbance. Overall, microfibres dominated in estuarine water (69%) and mangrove sediment (51%). Polyethylene (43%) and polypropylene (23%) were the dominant polymers overall. Weathered fishing gear, weathered packaging items and run-off from urban/industrial centres are probable sources of MP pollution. Increased run-off and river input during the wet/rainy season may explain the markedly higher MP loads in estuarine waters relative to the dry season. By contrast, MP deposition in mangrove sediment was higher during the dry season. Sediment MP abundance was significantly positively correlated with both pneumatophore density and sediment size (500–2000 µm). This study highlights the role of mangroves as MP sinks, which may limit movement of MPs into adjacent environments. However, under conditions such as flooding and extreme wave action, mangroves may shift from sinks to sources of plastic pollution.

Microplastics in a salt-wedge estuary: Vertical structure and tidal dynamics

The abundance and distribution of microplastics in estuaries have been barely documented, and generally without accounting for the vertical structure in the water column. This study presents the very first data on the occurrence and distribution of microplastics in the Adour Estuary, SW France. The experimental data set was complemented by numerical simulations to gain understanding of the behaviour of suspended microplastics. Microplastics were found throughout the water column with a mean abundance of 1.13 part/m3. Films and fragments were the most abundant types of particles collected. Numerical simulations demonstrated that vertical distribution of microplastics in the water column is highly dependent on particle characteristics and on the local hydrodynamics. The main trend is that neutrally-buoyant microplastics are easily flushed out while heavier microplastics are prone to entrapment in the estuary, in particular under low discharge conditions. The present study suggest that estuaries could be a sink of microplastics.

Horizontal and vertical distribution of microplastics in the Wuliangsuhai Lake sediment, northern China

Microplastics are ubiquitous in the environment, sediments in the water body are considered as the sink of microplastics, but its accumulation and change trend have received little attention. We assessed the concentrations of microplastics in sediment samples collected in Wuliangsuhai Lake. The abundance of microplastics (0–6 cm) in surface sediment ranged from 16.5 to 72.4 particles 100 g−1 dry weight. The results show that the abundance, type and size of microplastics in surface sediment of different functional areas are different. Four sampling points were selected to investigate the vertical distribution of microplastics. The abundance of microplastics exhibited a clear decreasing trend with increased sediment depth, the abundance of microplastics in deep sediments is much less. This result shows that when estimating the storage of microplastics in sediments, if only considered the surface sediments, the assessment of microplastic storage worldwide might be underestimated.

Microplastic concentrations at the water surface are reduced by decreasing flow velocities caused by a reservoir

Microplastic particles are found globally in all kinds of water bodies posing a serious threat to aquatic organisms and ecosystems. However, plastic concentrations are not homogeneously distributed and can decrease along a river course. Thus, potential sinks need to exist. Dams and reservoirs are proposed to be such potential sinks for microplastics. We investigated plastic concentrations at the water surface upstream and downstream of a reservoir inundated by a wastewater treatment plant effluent by filtering water with a net with 200 μm mesh size. We sampled at flow velocities ranging from 6 cm s –1 to 35 cm s –1 . Upstream of the reservoir significantly higher concentrations of microplastics (19.9 ± 7.3 particles per m –3) than downstream (3.4 ± 2.2 particles per m–3) were identified. Furthermore, the plastic concentrations increased with increasing flow velocities. Hence, reservoirs can be sinks of microplastics as decreased flow velocities may lead to an increased sedimentation or decreased erosion potential. Consequently, flow velocities are critical when identifying plastic loads. Single time or single spot measurements may not well represent plastic loads if flow velocities vary considerably in time or space.

Coupled effects of urbanization level and dam on microplastics in surface waters in a coastal watershed of Southeast China

Investigating the heterogeneous distribution pattern of plastic pollution in river systems is useful for better understanding the transport pathways of plastics from land to sea. Therefore, we analyzed samples from 17 sites to evaluate the distribution pattern of microplastics (MPs) in Minjiang River Watershed. The MP concentrations ranged between 0.12 and 2.72 n/L, with higher microplastic concentrations located in urban areas with greater population and gross domestic product (GDP) densities. MP concentrations were positively correlated with population density, GDP density, and built-up land use percentage, suggesting that increasing urbanization level will lead to greater plastic pollution. MP concentrations spanning the upstream and downstream sides of the SK Hydropower Dam showed decreasing trends, suggesting that MP settling would occur behind the dam and Shuikou Reservoir might serve as a sink for MPs. This study provides useful insight for revealing the effects of urbanization and dams on spatial distribution of riverine MPs.

Microplastics in sediment cores as indicators of temporal trends in microplastic pollution in Andong salt marsh, Hangzhou Bay, China

Microplastics are widely dispersed in the coastal and marine environment, and sediments are considered to be sinks for microplastics. In this study, a total of 53 sediment samples were removed from different depths of two sediment cores collected in Andong salt marsh, Hangzhou Bay. The microplastics were extracted from the sediment cores through a density floating separation method. The shape, size, and color of the microplastics was then observed under a microscope. Polymer types were identified using micro-Fourier transform infrared spectroscopy. The average abundance of microplastics was 13.2 ± 6.0 items 50 g−1 dry weight. The main components of microplastics were polystyrene, cellophane, polyethylene and polypropylene. The quantities of microplastics at different depths in the sediment cores were consistent with the history of microplastic pollution.

Polyethylene Terephthalate and Polycarbonate Microplastics in Sewage Sludge Collected from the United States

Microplastics (MPs) are emerging pollutants of public health and environmental concern. Sewage sludge is a sink for MPs that originate from domestic sources and can provide an indication of the mag...