Microplastic Fragments Research Articles

Do Added Microplastics, Native Soil Properties, and Prevailing Climatic Conditions Have Consequences for Carbon and Nitrogen Contents in Soil? A Global Data Synthesis of Pot and Greenhouse Studies.

Microplastics threaten soil ecosystems, strongly influencing carbon (C) and nitrogen (N) contents. Interactions between microplastic properties and climatic and edaphic factors are poorly understood. We conducted a meta-analysis to assess the interactive effects of microplastic properties (type, shape, size, and content), native soil properties (texture, pH, and dissolved organic carbon (DOC)) and climatic factors (precipitation and temperature) on C and N contents in soil. We found that low-density polyethylene reduced total nitrogen (TN) content, whereas biodegradable polylactic acid led to a decrease in soil organic carbon (SOC). Microplastic fragments especially depleted TN, reducing aggregate stability, increasing N-mineralization and leaching, and consequently increasing the soil C/N ratio. Microplastic size affected outcomes; those <200 μm reduced both TN and SOC contents. Mineralization-induced nutrient losses were greatest at microplastic contents between 1 and 2.5% of soil weight. Sandy soils suffered the highest microplastic contamination-induced nutrient depletion. Alkaline soils showed the greatest SOC depletion, suggesting high SOC degradability. In low-DOC soils, microplastic contamination caused 2-fold greater TN depletion than in soils with high DOC. Sites with high precipitation and temperature had greatest decrease in TN and SOC contents. In conclusion, there are complex interactions determining microplastic impacts on soil health. Microplastic contamination always risks soil C and N depletion, but the severity depends on microplastic characteristics, native soil properties, and climatic conditions, with potential exacerbation by greenhouse emission-induced climate change.

Experimental investigation of the fallout dynamics of microplastic fragments in wind tunnel: The BURNIA agenda

We present a methodology and the first tests to estimate the settling velocity of airborne microplastics based on wind tunnel experiments. A novel approach and original perspective are proposed, discussing in detail challenges and faced problems, both on the theoretical and experimental sides. Several experiments were performed, releasing fragments of different microplastic types, PET, PVC and LPDE. A statistical analysis was applied to the measurements and the values of the settling velocities were estimated to range between 0.1 and 0.2 ms−1, in agreement with most values found in the related literature. Based on the observed velocities, the applicability of the Stokes’ law, which is often used also for airborne microplastics, is then addressed, highlighting its potential limitations in the context of the microplastic dynamics in the atmosphere. We confirm that using the Stokes’ law may lead to a substantial overestimation of the settling velocity for the airborne microplastics. We also recommend to consider moving to the concept of ‘effective deposition velocity’, to account for the turbulent processes characterising the real atmosphere.

EDNA Adsorption onto Microplastics: Impacts of Water Chemistry and Polymer Physiochemical Properties.

Adsorption of biomacromolecules onto polymer surfaces, including microplastics (MPs), occurs in multiple environmental compartments, forming an ecocorona. Environmental DNA (eDNA), genetic material shed from organisms, can adsorb onto MPs which can potentially either (1) promote long-range transport of antibiotic resistant genes or (2) serve to gain insights into the transport pathways and origins of MPs by analyzing DNA sequences on MPs. However, little is known about the capacity of MPs to adsorb eDNA or the factors that influence sorption, such as polymer and water chemistries. Here we investigated the adsorption of extracellular linear DNA onto a variety of model MP fragments composed of three of the most environmentally prevalent polymers (polyethylene, polyethylene terephthalate, and polystyrene) in their pristine and photochemically weathered states. Batch adsorption experiments in a variety of water chemistries were complemented with nonlinear modeling to quantify the rate and extent of eDNA sorption. Ionic strength was shown to strongly impact DNA adsorption by reducing or inhibiting electrostatic repulsion. Polyethylene terephthalate exhibited the highest adsorption capacity when normalizing for MP specific surface area, likely due to the presence of ester groups. Kinetics experiments showed fast adsorption (majority adsorbed under 30 min) before eventually reaching equilibrium after 1-2 h. Overall, we demonstrated that DNA quickly binds to MPs, with pseudo-first- and -second-order models describing adsorption kinetics and the Freundlich model describing adsorption isotherms most accurately. These insights into DNA sorption onto MPs show that there is potential for MPs to act as vectors for genetic material of interest, especially considering that particle-bound DNA typically persists longer in the environment than dissolved DNA.

Size dependent uptake and trophic transfer of polystyrene microplastics in unicellular freshwater eukaryotes

Microplastics (MP) have become a well-known and widely investigated environmental pollutant. Despite the huge amount of new studies investigating the potential threat posed by MP, the possible uptake and trophic transfer in lower trophic levels of freshwater ecosystems remains understudied. This study aims to investigate the internalization and potential trophic transfer of fluorescent polystyrene (PS) beads (0.5 μm, 3.6 × 108 particles/mL; 6 μm, 2.1 × 105 particles/mL) and fragments (<30 μm, 5 × 103 particles/mL) in three unicellular eukaryotes. This study focuses on the size-dependent uptake of MP by two freshwater Ciliophora, Tetrahymena pyriformis, Paramecium caudatum and one Amoebozoa, Amoeba proteus, serving also as predator for experiments on potential trophic transfer. Size-dependent uptake of MP in all three unicellular eukaryotes was shown. P. caudatum is able to take up MP fragments up to 27.7 μm, while T. pyriformis ingests particles up to 10 μm. In A. proteus, small MP (PS0.5μm and PS6μm) were taken up via pinocytosis and were detected in the cytoplasm for up to 14 days after exposure. Large PS-MP (PS<30μm) were detected in A. proteus only after predation on MP-fed Ciliophora. These results indicate that A. proteus ingests larger MP via predation on Ciliophora (PS<30μm), which would not be taken up otherwise. This study shows trophic transfer of MP at the base of the aquatic food web and serves as basis to study the impact of MP in freshwater ecosystems.

Distribution of microplastics in Lusi Island, Sidoarjo, Indonesia

Lusi Island, situated downstream of the Brantas River, is anticipated to harbour significant microplastics from Brantas River runoff. Consequently, a thorough analysis of the microplastic presence on Lusi Island is crucial for effective pollution mitigation. Despite the critical need for such investigations, more studies must report the abundance of microplastics in this locale. This study aims to fill this gap by examining the abundance of microplastics in the downstream area of the Brantas River, specifically Lusi Island. The research not only delves into the prevalence of microplastics but also investigates various water quality parameters, including dissolved oxygen, pH, temperature, turbidity, and total dissolved oxygen. The study reveals that the abundance of microplastics in Lusi Island ranges from 597 to 787 particles per litre in surface water samples. Three distinct types of microplastics—fragments, fibres, and film—were identified on the island. Notably, microplastic fragments dominate in number compared to other forms. Despite the favourable water quality parameters suggesting a healthy aquatic environment, the study underscores the necessity of implementing mitigation measures to address microplastic pollution effectively.

Landscape and risk assessment of microplastic contamination in farmed oysters and seawater along the coastline of China

Microplastic (MP) pollution poses a significant threat to marine ecosystem and seafood safety. However, comprehensive and comparable assessments of MP profiles and their ecological and health in Chinese farming oysters are lacking. This study utilized laser infrared imaging spectrometer (LDIR) to quantify MPs in oysters and its farming seawater at 18 sites along Chinese coastlines. Results revealed a total of 3492 MPs in farmed oysters and seawater, representing 34 MP types, with 20–100 µm MP fragments being the dominant. Polyurethane (PU) emerged as the predominant MP type in oysters, while polysulfones were more commonly detected in seawater. Notably, oysters from the Bohai Sea exhibited a higher abundance of MPs (13.62 ± 2.02 items/g) and estimated daily microplastic intake (EDI, 2.14 ± 0.26 items/g/kg·bw/day), indicating a greater potential health risk in the area. Meanwhile, seawater from the Yellow Sea displayed a higher level (193.0 ± 110.7 items/L), indicating a greater ecological risk in this region. Given the pervasiveness and abundance of PU and its high correlation with other MP types, we proposed PU as a promising indicator for monitoring and assessing the risk MP pollution in mariculture in China. These findings provide valuable insights into the extent and characteristics of MP pollution in farmed oysters and seawater in China.

Oxidative stress status and antioxidative responses in neonate versus adult Daphnia magna exposed to polystyrene leachate

ObjectivePlastic pollution, particularly polystyrene, significantly threatens aquatic ecosystems worldwide. Furthermore, plastic leachates have been documented to be detrimental to some aquatic organisms; however, understanding the toxicity mechanism remains limited. This study aimed to investigate the ecotoxicological effects of polystyrene leachate on neonate and adult Daphnia magna, a keystone species in freshwater ecosystems.MethodsThe effects of the leachate were studied by employing the novel technique of separating daphnids from the polystyrene microplastic fragments via dialysis tubing, which was prepared 24 and 72 h before organism exposure. Acute toxicity was assessed as effects on organism mobility, oxidative stress (reactive oxygen species), antioxidative enzyme responses (superoxide dismutase and catalase), as well as the effects on the biotransformation enzyme glutathione S-transferase’s activity.ResultsUnder the experimental conditions, the mobility and oxidative status of the daphnids were unaffected, irrespective of the organisms’ age or leaching time. In adults exposed for 24 h, the antioxidant defense enzyme activities were elevated, contributing to cellular homeostasis maintenance. However, the catalase activity was reduced for neonates and adults exposed to the prolonged pre-leached treatment, thus making them less capable of retaining homeostasis when exposed to toxicant mixtures.ConclusionThis study highlights the vulnerability of D. magna to polystyrene leachate and underscores the need for continued research on the ecotoxicological effects of plastic pollution in aquatic ecosystems. Findings from this investigation contribute to understanding the ecological consequences of plastic pollution, which can inform mitigation strategies and policy decisions to preserve the health and integrity of freshwater ecosystems.

Settling Velocities of Small Microplastic Fragments and Fibers.

There is only sparse empirical data on the settling velocity of small, nonbuoyant microplastics thus far, although it is an important parameter governing their vertical transport within aquatic environments. This study reports the settling velocities of 4031 exemplary microplastic particles. Focusing on the environmentally most prevalent particle shapes, irregular microplastic fragments of four different polymer types (9-289 μm) and five discrete length fractions (50-600 μm) of common nylon and polyester fibers are investigated, respectively. All settling experiments are carried out in quiescent water by using a specialized optical imaging setup. The method has been previously validated in order to minimize disruptive factors, e.g., thermal convection or particle interactions, and thus enable the precise measurements of the velocities of individual microplastic particles (0.003-9.094 mm/s). Based on the obtained data, ten existing models for predicting a particle's terminal settling velocity are assessed. It is concluded that models, which were specifically deduced from empirical data on larger microplastics, fail to provide accurate predictions for small microplastics. Instead, a different approach is highlighted as a viable option for computing settling velocities across the microplastics continuum in terms of size, density, and shape.

Influence of plastic shape on interim fragmentation of compostable materials during composting

Common experience with rotting wooden buildings demonstrates that fragmentation is a necessary natural process during biodegradation. In analogy, the loss of structural integrity of biodegradable plastics during biodegradation produces interim microplastic fragments. It is currently not known which parameters govern fragmentation kinetics: chemical structure, physical shape, and composite layers, or composting conditions may all be relevant. Here we investigated the influence of physical shape on the fragmentation of a polyester blend during laboratory tests simulating industrial composting. Methods previously validated on micronized granules as model shape were applied to shapes that better represent consumer products, such as micronized thin films and shredded plastic-coated paper cups. The peak interim number of detected fragments, which are between 3 and 2000 µm, ranked highest for micronized films, lower for micronized plastic granules, and even lower for coated paper cups. The layered structure of polyester on cellulose may thus have stabilized the biodegrading polyester compound against fragmentation. For thin films, fragment counts dissipated with halftime of 2.5 days, and less than 10–8% of the initially added polyester mass was detected in fragments between 3 and 25 µm at the last sampling time point. The physical shape and multilayer structure of the polymer-containing product were found to be decisive for fragmentation kinetics, indicating that tests on micronized polymer granules might not be representative of the release mechanism of fragments from consumer products containing plastic coatings.

Traceability of Microplastic Fragments from Waste Plastic Express Packages Using Near-Infrared Spectroscopy Combined with Chemometrics.

The pollution from waste plastic express packages (WPEPs), especially microplastic (MP) fragments, caused by the blowout development of the express delivery industry has attracted widespread attention. On account of the variety of additives, strong complexity, and high diversity of plastic express packages (PEPs), the multi-class classification of WPEPs is a typical large-class-number classification (LCNC). The traceability and identification of microplastic fragments from WPEPs is very challenging. An effective chemometric method for large-class-number classification would be very beneficial for the comprehensive treatment of WPEP pollution through the recycling and reuse of waste plastic express packages, including microplastic fragments and plastic debris. Rather than using the traditional one-against-one (OAO) and one-against-all (OAA) dichotomies, an exhaustive and parallel half-against-half (EPHAH) decomposition, which overcomes the defects of the OAO's classifier learning limitations and the OAA's data proportion imbalance, is proposed for feature selection. EPHAH analysis, combined with partial least squares discriminant analysis (PLS-DA) for large-class-number classification, was performed on 750 microplastic fragments of polyethylene WPEPs from 10 major courier companies using near-infrared (NIR) spectroscopy. After the removal of abnormal samples through robust principal component analysis (RPCA), the root mean square error of cross-validation (RMSECV) value for the model was reduced to 0.01, which was 21.5% lower than that including the abnormal samples. The best models of PLS-DA were obtained using SNV combined with SG-17 smoothing and 2D (SNV+SG-17+2D); the latent variables (LVs), the error rates of Monte Carlo cross-validation (ERMCCVs), and the final classification accuracies were 6.35, 0.155, and 88.67% for OAO-PLSDA; 5.37, 0.103, and 87.33% for OAA-PLSDA; and 3.12, 0.054, and 96.00% for EPHAH-PLSDA. The results showed that the EPHAH strategy can completely learn the complex LCNC decision boundaries for 10 classes, effectively break the tie problem, and greatly improve the voting resolution, thereby demonstrating significant superiority to both the OAO and OAA strategies in terms of classification accuracy. Meanwhile, PLS-DA further maximized the covariance and data interpretation abilities between the potential variables and categories of microplastic debris, thereby establishing an ideal performance identification model with a recognition rate of 96.00%.

Role of benzophenone-3 additive in the effect of polyethylene microplastics on Daphnia magna population dynamics

The adverse effects of microplastics (MPs) on Daphnia magna have been extensively studied; however, their population-level effects are relatively unknown. This study investigated the effect of polyethylene MP fragments (33.90 ± 17.44 μm) and benzophenone-3 (BP-3), which is a widely used plastic additive (2.91 ± 0.02% w/w), on D. magna population dynamics in a 34-day microcosm experiment. In the growth phase, neither MP nor MP/BP-3 fragments changed the population size of D. magna compared with the control. However, MP/BP-3 fragments significantly reduced (p < 0.05) the population biomass compared to that of the control, whereas MP fragments did not induce a significant reduction. The MP/BP-3 group had a significantly higher (p < 0.05) neonate proportion than that in the control and MP groups. MP/BP-3 fragments upregulated usp and downregulated ecrb, ftz-f1, and hr3, altering gene expression in the ecdysone signaling pathway linked to D. magna growth and development. These findings suggested that BP-3 in MP/BP-3 fragments may disrupt neonatal growth, thereby decreasing population biomass. In the decline phase, MP fragments significantly decreased (p < 0.05) the population size and biomass of D. magna compared with the control and MP/BP-3 fragments. This study highlights the importance of plastic additives in the population-level ecotoxicity of MPs.

Pulmonary toxicity assessment of polypropylene, polystyrene, and polyethylene microplastic fragments in mice.

The online version contains supplementary material available at 10.1007/s43188-023-00224-x.

Microplastics affect soil-plant system: Implications for rhizosphere biology and fitness of sage (Salvia officinalis L.)

A mesocosm experiment was set-up to investigate the effects of low-density polyethylene (LDPE) fragments deriving from plastic film on soil ecology, rhizosphere and plant (Salvia officinalis L.) fitness. The internal transcribed spacer (ITS) and 16S metagenomic analysis was adopted to evaluate taxonomic and functional shifts of both soil and rhizosphere under the influence of microplastics (MPs). Photosynthetic parameters and enzymes involved in oxidative stress were assessed to unveil the plant physiological state. MP fragments were analysed by scanning electron microscope (SEM) and metagenomics to investigate the plastisphere. Microbial biomarkers of MPs pollution were identified in soil and rhizosphere, reinforcing the concept of molecular biomonitoring. Overall, Bacillus, Nocardioides and Streptomyces genera are bacterial biomarkers of MPs pollution in soil whereas Aspergillus, Fusarium and Trichoderma genera, and Nectriaceae family are fungal biomarkers of MPs polluted soil. The data show that the presence of MPs promotes the abundance of taxa involved in the soil N cycle, but simultaneously reduces the endophytic interaction capability and enhances pathogen related functions at the rhizosphere level. A significant decrease in chlorophyll levels and increase of oxidative stress enzymes was observed in plants grown in MPs-polluted soil. The SEM observations of MPs fragments revealed a complex colonisation, where bacteria (Bacillus in MPSo and Microvirga in MPRz) and fungi (Aspergillus in MPSo and Trichoderma in MPRz) represent the main colonisers. The results demonstrate that the presence of MPs causes changes in the soil and rhizosphere microbial community and functions leading to negative effects on plant fitness.

Laboratory Measurements of Pyrene and Acenaphthene Partition into Microplastics

Microplastics are a major environmental issue. In marine systems, these break down into small fragments that may lodge within organisms, but they behave as vectors for chemicals when pollutants such as metals, polycyclic aromatic hydrocarbons (PAHs), pesticides, and pharmaceuticals are absorbed by the particles. The rate and extent of uptake of organic compounds onto microplastics is dependent on a range of factors such as the sites available on the surface, the type of plastic, and the compound being sorbed, with hydrophobicity an important property. Laboratory experiments determined the uptake of pyrene and acenaphthene (and sometimes phenanthrene) onto pellets of polyvinyl chloride (PVC), polyethylene terephthalate (PET), polyoxymethylene (POM), polypropylene (PP) and polystyrene (PS). The kinetics of uptake in the experiments reveals half-lives ~10 h. The extent of partition onto the plastic pellets was similar for pyrene and phenanthrene, though lower for acenaphthene. This was not surprising because the octanol-water distribution coefficient of acenaphthene is about an order of magnitude smaller than that of pyrene, suggesting it is less hydrophobic. The PAHs are distributed most strongly into PP but only weakly into PVC. The fragmentation and oxidation of microplastics means that they sorb increasing amounts of organic material as they age.

Polyethylene microplastics induced lipidomic responses in Chironomus tepperi: A two-generational exploration

Microplastics (MPs) accumulating in freshwater sediment have raised concerns about potential risks to benthic dwelling organisms, yet few studies have examined the long-term impacts caused by MP exposure. This study investigated alterations to lipid profiles in an Australian freshwater invertebrate, Chironomus tepperi, induced by polyethylene MP fragments (1–45 μm) at environmentally relevant concentrations (125, 250, 500 and 1000 MPs/kg sediment), using a two-generational experimental design. In the parental generation, the relative abundance of triacylglycerols, total fatty acids and unsaturated fatty acids exhibited apparent hormetic patterns, with low-concentration stimulation and high-concentration inhibition observed. The overall trend in these lipid classes is consistent with previously observed changes to polar metabolite profiles, indicating that ingestion of MPs could inhibit nutrient assimilation from food leading to disruption of energy availability. In the first filial generation continuously exposed to MPs, however, abundance of cholesterol and total fatty acids increased with increasing exposure concentrations, suggesting different effects on energy metabolism between the parental generation and offspring. No differences in the lipidome were observed in first filial larvae that were not exposed, implying that MPs pose negligible carry-over effects. Overall, the combined results of this study together with a preceding metabolomics study provide evidence of a physical effect of MPs with subsequent impacts to bioenergetics. Nevertheless, future research is required to explore the potential long-term impacts caused by MPs, and to unravel the impacts of the surfactant control as a potential contributor to the observed hormetic response, particularly for studies exploring sub-lethal effects of MP exposure using sensitive omics techniques.

An assessment of microplastics in fecal samples from polar bears (Ursus maritimus) in Canada's North

We assessed the potential for plastic ingestion in polar bears ( Ursus maritimus (Phipps (1774))) using fecal analysis. Two method studies ensured our protocols could effectively recover and identify plastics in feces. First, microplastics (film, foam, or fragments) were intentionally introduced into a model organic matrix. Recovery rates (mean ± standard deviation) averaged 95.8 ± 14.7% ( n = 18) and were significantly affected by microplastic morphology but not digestion status. Second, microplastic fragments of polypropylene, polyethylene terephthalate, and polystyrene were intentionally introduced to polar bear feces. Recovery rates averaged 79.3 ± 21.6% ( n = 8) and Raman microscopy successfully identified all three polymers in 87.5% of samples. The main study then investigated the presence of microplastics in hunter-collected polar bear feces in the Canadian Arctic. Feces from the colons of hunted bears ( n = 15) and field scat ( n = 15) were collected through collaboration with Inuit communities. Polypropylene, polyethylene, and/or polyethylene terephthalate were detected in the feces of eight bears. Concentrations of microplastics in feces were, on average, less than 1 particle/g dry weight feces and at or near detection limits. Overall, this work suggests microplastic ingestion by Canadian polar bears may be low and demonstrates the utility of fecal sampling for community-based monitoring programs.

Terrestrial Isopods Generate Microplastics from Low-Density Polyethylene Without Effects on Survival.

With concern growing regarding the impact of microplastics (MPs) on terrestrial ecosystems, it is important to assess the role invertebrates may play in the fate of MPs within these ecosystems. Commonly, MPs enter these environments through improperly discarded waste or the application of treated biosolids and/or wastewater on agricultural soils. The present study investigated whether three species of terrestrial isopod (Porcellio scaber, Porcellio laevis, and Porcellionides pruinosus) ingest plastic debris and generate MPs during exposures varying from 24 h to 14 days and whether this may have an adverse effect on their health. Test vessels were designed to expose isopods to plastic fragments in the form of polyethylene plastic foam. Isopods were exposed to plastic that was either (1) pristine, or (2) weathered in a soil and water solution prior to incorporation in test vessels. When exposed to weathered polyethylene, all three species generated MPs (minimum-maximum size values for all durations inclusive: P. laevis = 114-1673 µm, P. scaber = 99-1635 µm, P. pruinosus = 85-1113 µm) through the consumption of macroplastic fragments with no observed impact on their health. In the shorter-duration exposures, the number of MPs generated by the isopod species in the present study was highly variable between experimental vessels (minimum-maximum generated MPs for 14-day exposure: P. laevis = 25-420, P. scaber = 50-583, P. pruinosus = 48-311). However, as the exposure durations increased, there was a clear trend of increasing MP generation, indicating that the isopods continued to consume the plastic fragments as long as the surface was weathered. A significant difference in the size of generated MPs was observed as well, with smaller isopod species generating smaller MP fragments on average. The results of the present study confirm that certain species of isopod can contribute to the generation of MPs, which constitutes an additional pathway of MP exposure to soil ecosystems. Environ Toxicol Chem 2024;43:784-792. © 2023 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

Microplastic Particles in Sandy Beaches of Thessaloniki Gulf, Greece

Microplastic pollution is a major issue for aquatic ecosystems. In this study, an assessment of microplastic pollution in beach sediments of Thessaloniki Gulf is presented. Sand sampling was performed in October 2021, in three different coastal areas along the seashore of Thessaloniki Gulf, in NW Aegean Sea. In total, nine sand samples were collected and examined. The morphology of the detected microplastics was recorded: they were fragments and microfibers. Their abundance ranged from 0-32 items/m3. Higher concentrations of microplastics were observed in Karabournaki Beach, located in the city of Thessaloniki. It is the second largest city in Greece, inhabited by about 1,5 million people. Regarding the color, black, red, blue, green, and transparent microplastic fragments were found. Black and blue particles were the most common. Chemical detection and identification were performed with FT-IR spectroscopy. Four polymers were detected: polyethylene (PE), terephthalate (PET), high-density polyethylene (HDPE), polypropylene (PP), and polytetrafluoroethylene (PTFE). Polyethylene terephthalate was the dominant identified polymer (50%). The need for plastic pollution management in coastal areas, as well as the need to communicate the issue of plastic marine pollution and enhance public awareness, are discussed.

Microplastic release and sulfate reduction response in the early stage of a simulated landfill

Landfills are essential facilities for treating and disposing municipal solid waste. They emit sulfur-containing odors and serve as an important sink for a new type of pollutant called microplastics (MPs). This study focused on the initial stage of anaerobic degradation to establish the relationship between the release of MPs and odor generation. Our findings show the rapid release of MPs into the leachate in the early stage of landfill and their predominant accumulation in the leachate sediment. The circulating leachate contained 1.45 times higher concentrations of MPs than the noncirculating leachate, with a peak concentration of 39 items·L−1. In addition, fragmentation of MPs occurred. The percentage of MPs with particle sizes of 2.5–5 mm decreased from 66.70 % to 22.32 %, while those measuring 0.1–0.5 mm increased by 33.12 %. A positive correlation was observed between MP release and sulfate reduction. Although leachate circulation increased the release of MPs, it also reduced the overall release time and total amount of MPs exported from the landfill. Compared with the initial landfill waste, the leachate operation mode, regardless of circulation, resulted in a 6.15–8.93-fold increase in MP release. These findings provide a valuable foundation for the simultaneous regulation of traditional pollutant odor and new pollutants (MPs) in landfills.

Microplastics and Nanoplastics Impair the Biophysical Function of Pulmonary Surfactant by Forming Heteroaggregates at the Alveolar-Capillary Interface.

Microplastics (MPs) are ubiquitous environmental pollutants produced through the degradation of plastic products. Nanoplastics (NPs), commonly coexisting with MPs in the environment, are submicrometer debris incidentally produced from fragmentation of MPs. We studied the biophysical impacts of MPs/NPs derived from commonly used commercial plastic products on a natural pulmonary surfactant extracted from calf lung lavage. It was found that in comparison to MPs/NPs derived from lunch boxes made of polypropylene or from drinking water bottles made of poly(ethylene terephthalate), the MP/NP derived from foam packaging boxes made of polystyrene showed the highest adverse impact on the biophysical function of the pulmonary surfactant. Accordingly, intranasal exposure of MP/NP derived from the foam boxes also induced the most serious proinflammatory responses and lung injury in mice. Atomic force microscopy revealed that NP particles were adsorbed on the air-water surface and heteroaggregated with the pulmonary surfactant film. These results indicate that although the incidentally formed NPs only make up a small mass fraction, they likely play a predominant role in determining the nano-bio interactions and the lung toxicity of MPs/NPs by forming heteroaggregates at the alveolar-capillary interface. These findings may provide novel insights into understanding the health impact of MPs and NPs on the respiratory system.