Detection Of Microplastics Research Articles

Misinterpretation in microplastic detection in biological tissues: When 2D imaging is not enough

The presence of microplastics in the food chain is a public concern worldwide, and its analysis is an analytical challenge. In our research, we apply Raman imaging to study the presence of 1 μm polystyrene microplastics in cryosections of Mytilus galloprovincialis due to its wide geographic distribution, widespread occurrence in the food web, and general high presence in the environment. Ingested microplastics are accumulated in the digestive tract, but a large number can also be rapidly eliminated. Some authors state that the translocation of microplastics to the epithelial cells is possible, increasing the risk of microplastics transmission along the food chain. However, as seen in our study, a surface imaging approach (2D) is probably not enough to confirm the internalization of particles and avoid misinterpretation. In fact, while some microplastic particles were detected in the epithelium by 2D Raman imaging, further 3D Raman imaging analysis demonstrated that those particles were dragged from the lumens to the epithelium during sample preparation due to the blade drag effect of the cryotome, and subsequently located on the surface of the analyzed cryosection, discarding the translocation to the epithelial cells. This effect can also happen when the samples are fortuitously contaminated during sample preparation. Several research articles that use similar analytical techniques have shown the presence of microplastics in different types of tissue. It is not our intention to put such results in doubt, but the present work points out the necessity of appropriate three-dimensional analytical methods including data interpretation and the need to go a step further than just surface imaging analysis.

A Review of the Distribution, Characteristics and Environmental Fate of Microplastics in Different Environments of China

Microplastics (MPs) are ubiquitously present in different environmental media that can lead to potential hazards to the global ecosystem and human health. As the largest producer and user of plastics in the world, the abundance and characteristics of MPs contamination in various environmental media in China deserve to be paid more attention. To assess the ecological and environmental risks of MPs, their abundance, sources and contamination characteristics in different environmental media in China were investigated. In this review, MPs data from 1862 sampling sites in six environmental media in China have been collected. The mean abundance of MPs in different environmental media was then summarized and analyzed, which was 160.35 ± 114.68 items m−3 in seawater, 413.91 ± 216.02 items kg−1 in seawater sediments, 3546.38 ± 382.61 items m−3 in inland water, 1297.71 ± 910.47 items kg−1 in inland water sediments, 1987.86 ± 1004.31 items kg−1 in soils, and 119.68 ± 85.40 items m−2 d−1 in atmospheric fallout, respectively. The sizes of MPs were mainly < 1 mm, and the types of MPs were mainly polypropylene, polyethylene and polyethylene terephthalate. In addition, we discussed the challenges posed by the inadequacy of MPs detection methods for the analysis of MPs contaminated areas and provided prospects on future research on MPs contamination. This review can improve our understanding of the pollution characteristics of MPs in China, illustrate the migration and transformation patterns of MPs in the overall environment, and provide reliable reference data for the development of MPs detection standards.

Mini review of microplastic pollutions and its impact on the environment and human health.

In recent years, the environmental pollution of microplastics (MPs) has increasingly drawn our attention. MPs are small fragments of plastics that are commonly dispersed in the environment. The accumulation of environmental MPs is due to population growth and urbanization, while natural disasters such as hurricanes, flooding and human activity may influence their distribution. The leaching of chemicals from MPs raises a significant safety problem and environmental approaches aimed at reducing the use and recycling of plastics, with the replacement by bioplastics and wastewater treatment developments are called for. This summary also helps in demonstrating the connection between terrestrial and freshwater MPs and wastewater treatment plants as the major contributors to environmental MPs by discharges of sludge and effluent. More research on the classification, detection, characterization and toxicity of MPs are essential to enable greater options and solutions. Control initiatives need to intensify the comprehensive study of MP waste control and management information programmes in the fields of institutional engagement, technological research and development, legislation and regulation. A comprehensive quantitative analysis approach for MPs should be created in the future, and more reliable traceability analysis methods should be built to examine further its environmental activity and existence, where this should be done to improve scientific research on MP pollution in terrestrial, freshwater and marine environments and hence, develop more scientific and rational control policies.

Microfluidics as a Ray of Hope for Microplastic Pollution

Microplastic (MP) pollution is rising at an alarming rate, imposing overwhelming problems for the ecosystem. The impact of MPs on life and environmental cycles has already reached a point of no return; yet global awareness of this issue and regulations regarding MP exposure could change this situation in favor of human health. Detection and separation methods for different MPs need to be deployed to achieve the goal of reversing the effect of MPs. Microfluidics is a well-established technology that enables to manipulate samples in microliter volumes in an unprecedented manner. Owing to its low cost, ease of operation, and high efficiency, microfluidics holds immense potential to tackle unmet challenges in MP. In this review, conventional MP detection and separation technologies are comprehensively reviewed, along with state-of-the-art examples of microfluidic platforms. In addition, we herein denote an insight into future directions for microfluidics and how this technology would provide a more efficient solution to potentially eradicate MP pollution.

Microplastics in different water samples (seawater, freshwater, and wastewater): Methodology approach for characterization using micro-FTIR spectroscopy

Microplastics of millimeter dimensions have been widely investigated in environmental compartments and today, studies are mainly focused on particles of smaller dimensions (< 500 µm). However, as there are no relevant standards or policies for the preparation and analysis of complex water samples containing such particles, the results may be questionable. Therefore, a methodological approach for 10 µm to 500 µm microplastic analysis was developed using μ-FTIR spectroscopy coupled with the siMPle analytical software. This was undertaken on different water samples (sea, fresh, and wastewater) taking into consideration rinsing water, digestion protocols, collection of microplastics, and sample characteristics. Ultrapure water was the optimal rinsing water and ethanol was also proposed with a mandatory previous filtration. Although water quality could give some guidelines for the selection of digestion protocols, it is not the only decisive factor. The methodology approach by μ-FTIR spectroscopy was finally assessed to be effective and reliable. This improved quantitative and qualitative analytical methodology for microplastic detection can then be used to assess the removal efficiency of conventional and membrane treatment processes in different water treatment plants.

Digital holographic approaches to the detection and characterization of microplastics in water environments.

Microplastic (MP) pollution is seriously threatening the environmental health of the world, which has accelerated the development of new identification and characterization methods. Digital holography (DH) is one of the emerging tools to detect MPs in a high-throughput flow. Here, we review advances in MP screening by DH. We examine the problem from both the hardware and software viewpoints. Automatic analysis based on smart DH processing is reported by highlighting the role played by artificial intelligence for classification and regression tasks. In this framework, the continuous development and availability in recent years of field-portable holographic flow cytometers for water monitoring also is discussed.

Airborne microplastics detected in the lungs of wild birds in Japan

Microplastics (MPs) have been found in a wide range of animal species including humans. The detection of MPs in human lungs suggests that humans inhale airborne microplastics (AMPs). Although birds respire more efficiently than mammals and are therefore more susceptible to air pollution, little is known about their inhalation exposure to MPs. In this study, we analyzed samples isolated from the lungs of several species of wild birds in Japan by attenuated total reflection (ATR) imaging method of micro-Fourier transform infrared (μFTIR) spectroscopy to clear whether AMPs can be inhaled and accumulate within the lungs of wild birds. To isolate MPs from lung samples of rock doves (Columba livia), black kites (Milvus migrans), and barn swallows (Hirundo rustica) euthanized for pest control, digestion and density separation were performed. After each sample collected on an alumina filter was measured by ATR imaging method using μFTIR spectroscopy, the physical and chemical characteristics of the detected MPs were evaluated. Six MPs were detected in 3 of 22 lung samples. Polypropylene and polyethylene were found in rock doves and ethylene vinyl acetate was found in a barn swallow. Most MPs were fragments of 28.0–70.5 μm. Our results demonstrated that in addition to dietary sources, some wild birds are exposed to MPs by inhalation, and these MPs reach the lungs.

Detection of microplastics in human saphenous vein tissue using μFTIR: A pilot study.

Microplastics (MPs) are ubiquitous in the environment, in the human food chain, and have been recently detected in blood and lung tissues. To undertake a pilot analysis of MP contamination in human vein tissue samples with respect to their presence (if any), levels, and characteristics of any particles identified. This study analysed digested human saphenous vein tissue samples (n = 5) using μFTIR spectroscopy (size limitation of 5 μm) to detect and characterise any MPs present. In total, 20 MP particles consisting of five MP polymer types were identified within 4 of the 5 vein tissue samples with an unadjusted average of 29.28 ± 34.88 MP/g of tissue (expressed as 14.99 ± 17.18 MP/g after background subtraction adjustments). Of the MPs detected in vein samples, five polymer types were identified, of irregular shape (90%), with alkyd resin (45%), poly (vinyl propionate/acetate, PVAc (20%) and nylon-ethylene-vinyl acetate, nylon-EVA, tie layer (20%) the most abundant. While the MP levels within tissue samples were not significantly different than those identified within procedural blanks (which represent airborne contamination at time of sampling), they were comprised of different plastic polymer types. The blanks comprised n = 13 MP particles of four MP polymer types with the most abundant being polytetrafluoroethylene (PTFE), then polypropylene (PP), polyethylene terephthalate (PET) and polyfumaronitrile:styrene (FNS), with a mean ± SD of 10.4 ± 9.21, p = 0.293. This study reports the highest level of contamination control and reports unadjusted values alongside different contamination adjustment techniques. This is the first evidence of MP contamination of human vascular tissues. These results support the phenomenon of transport of MPs within human tissues, specifically blood vessels, and this characterisation of types and levels can now inform realistic conditions for laboratory exposure experiments, with the aim of determining vascular health impacts.

Microplastic Detection and Analysis from Water and Sediment: A Review

AbstractThe presence and distribution of microplastics (MPs, &lt;5 mm) has been reported worldwide in the aquatic ecosystem and is identified as emerging pollutant that can adversely affect the health of aquatic environment. The production and consumption of plastics has increased tremendously worldwide because of their properties including pliability, low cost, versatility, durability, and lightweight. Currently, the global production of plastics exceeds 320 million tonnes (Mt) per year, with single‐use plastic accounting for more than 40% of this total. Because plastic is non‐biodegradable, the majority of its annual production accumulates and finally enters the aquatic systems. Aquatic biota may suffer physical damages, fatigue, reduced appetite, blockage of metabolic channels, and altered feeding behavior due to consumption of MPs. Occurrence of MPs in air and food samples has been documented across the world. Thus, the MPs may also pose a great risk to the health of human beings, because of the human exposure to MPs and their concerned harmful contaminants through food chain or ingestion through the air. Due to the vast abundance and deleterious effects of MPs, more studies are focusing on MPs to estimate their dispersion, fate, quantity, and transport in the global aquatic systems. Through this work we have reviewed various analytical techniques of MPs including the collection of samples from surface water and sediments, identification, and quantification. One of the most prevalent techniques for recognizing MPs is visual categorization, which can be improved by combining it with other techniques viz. spectrometry and thermal methods. This review provides an insight about the following objectives: (1) the global occurrence and distribution of MPs, (2) the extensive analysis of effects of MPs on aquatic biota, and (3) the assessment of the current methods for MP sampling and analysis.

Development of an Inexpensive and Comparable Microplastic Detection Method Using Fluorescent Staining with Novel Nile Red Derivatives

Fluorescent staining of microplastics as a detection method is consistently gaining importance in microplastics research, as it is fast, easy to use, and requires low technical effort. In this study, a complete procedure was developed, from sample collection to sample processing and detection, to measure microplastics with low cost and time requirements. The developed procedure was tested by measuring the microplastics in the effluent of a German wastewater treatment plant over a period of one year. The results show that the process is especially well suited to investigate temporal variations of microplastic contamination, which requires a large number of samples to be processed. Further, the precision and selectivity of the detection process could be improved by applying newly developed Nile red derivatives for fluorescent staining. A low budget modification of a microscope for fluorescent imaging is compared to a modification with precise optical bandpass filters. A script enabling automated microplastic detection and counting was developed, improving the accuracy and comparability of the process.

Presence of microplastic in the Patella caerulea from the northeastern Mediterranean Sea

This study reports first evidence of microplastic detection in the Patella caerulea collected from 5 different stations located in İskenderun Bay and Mersin Bay. A total of 160 P. caerulea specimens were examined and 40 of them contained MPs in their soft tissues. The number of microplastics extracted per sample varied from 0.20 ± 0.5 items/ind to 0.45 ± 0.7 items/ind depending on station. Fibers were predominant type of MPs and accounted for 75 % to 87.5 % of total extracted MPs, followed by fragments (12.5–25 %). Majority of MPs were 0.5–1 mm size and black in color. Fourier transform infrared spectroscopy (FTIR) showed that the extracted MPs were polypropylene (PP), polyethylene (PE), and polyethylene terephthalate (PET), high density polyethylene (HDPE). This study contributes to the knowledge of the transfer of microplastics to the marine food web and highlights the need for protective measurements.

Information Extraction from Unstructured Data on Microplastics through Text Mining

Objectives:In this study, we seek to provide a thorough insight into how people perceive microplastics and uncover issues and hidden trends about the significant microplastic pollution problems by analyzing unstructured data on microplastics.Methods:Environmental news articles related to microplastics were collected. Text mining techniques including data pre-processing, word cloud, TF-IDF weight-based trend analysis, and LDA topic modeling were used to analyze the amount of textual data.Results and Discussion:The public's interest in microplastics is consistently growing, according to an analysis of all environmental news and the keyword ‘microplastic’ from 2014 to 2021 conducted via BIGKinds. The keyword 'trash' was the overwhelmingly enormous weight among words. The top 5 keywords connected to microplastics did not fade away and continued appearing even though the socially noticeable keywords during the study period varied yearly. This indicates that the primary issue with microplastics related to keywords has not yet been solved. Our study has a limitation of subject diversity because we only focused on microplastic news. The results, however, presented all processes from plastic pollution emergence to treatment, such as microplastic pollution sources, microplastic detection, and prevention methods against microplastics.Conclusion:Text mining analysis was performed on microplastics in environmental news and provided issues and trends on microplastic pollution. This study presents a new methodology for environmental and social problem analysis, suggesting that it could enable a multidimensional understanding of environmental problems and help establish environmental policies.

Behavior, Characteristics and Sources of Microplastics in Tea

Microplastics have become a widespread environmental concern because they are found in most tested places, including the air we breathe and the food and beverages we consume. To explore the current status of microplastic pollution and future research trends in tea, we reviewed the distribution, abundance, shape, size and sources of microplastics in tea. Microplastics are plastic particles that are 5 mm in diameter or less. Those found in tea and tea gardens originate from agricultural plastic films, plastic packaging of products and tools used in tea production, organic fertilizers, even atmospheric deposition. The microplastics in tea gardens are typically fragments and fibers, mainly composed of polyethylene, polypropylene and polyethylene terephthalate. The prevention and control of microplastics in tea planting, tea processing and packaging should be strengthened, and reduce the input of products containing microplastics. Future research on microplastic detection methods in tea and determination of safety thresholds should be prioritized to provide a reference for microplastic contamination risk, control, and management in tea.

Microplastics in different water samples (seawater, freshwater, and wastewater): Removal efficiency of membrane treatment processes

The distribution and fate of microplastics in different water sources and their treatment plants (seawater, three municipal wastewaters, a pharmaceutical factory wastewater, and three drinking waters) in France were studied. Currently, research in this field is still under exploration since almost no relevant standards or policies have been introduced for the detection, the removal, or the discharge of microplastics. This study used an improved quantitative and qualitative analytical methodology for microplastic detection by μ-FTIR carried out with siMPle analytical software. By investigation, wastewater was determined to contain the most abundant microplastics in quantity (4,203–42,000 MP·L−1), then followed by surface water/groundwater (153–19,836 MP·L−1) and seawater (around 420 MP·L−1). Polyethylene was the dominant material in almost all water types followed by polypropylene, polystyrene, and polyethylene terephthalate. Almost all treatment technologies could remove microplastics whatever the feed water types and concentration of microplastics, though some treatment processes or transport pipes could cause additional contamination from microplastics. The four WWTPs, three DWTPs, and SWTP in France provided, respectively, 87.8–99.8%, 82.3–99.9%, 69.0–96.0% removal/retention of MPs in quantity, and provided 97.3–100%, 91.9–99.9%, 92.2–98.1% removal/retention of MPs in surface area. Moreover, ultrafiltration was confirmed to be an effective technology for microplastic retention and control of dimensions of microplastics in smaller ranges both in field-scale and lab-scale experiments. The 200 kDa ultrafiltration membrane could retain 70–100% and 80–100% of microplastics in quantity and in surface area, respectively.

Methods for the detection and characterization of boat paint microplastics in the marine environment

Microplastics in the marine environment have been the focus of intense research recently, however little attention has been given to boat paint sources, despite its direct influence on the marine ecosystem. This is largely due to the lack of established analytical methods. Microplastics from boating sources may originate from antifouling paints on the underwater body, surface coatings on the top sides, deck, and superstructure, as well as plastic parts of the boat construction. Their release can occur during construction, operation (leisure boats and commercial ships), service, and maintenance, from the materials themselves or used chemicals (e.g., abrasive detergents). Most importantly, boat paint microplastics containing biocides, such as the metals copper and zinc, and particles containing tin (residues from old or current use of tributyl-tin ship hull paints) should raise higher concern on potential environmental impacts. This study aims to provide practical insight on methods for the quantification of boat paint microplastics in marine waters and provide a baseline survey on their occurrence. Sampling and analysis methods are applied on case studies, i.e., marinas on the Swedish coast. A multi-method approach for identifying and characterizing boat paint microplastics based on visual and chemical characteristics is presented. In general, the measured content of biocide-containing microplastics was remarkably high in all marinas, with concentration levels of copper-rich particles &amp;gt;10 μm between 400 and 1400 particles per L. Given that biocide paint particles are manufactured to be toxic, it is particularly important to take into account field measurements in future environmental status assessments. This work underlines the importance of monitoring data in the action work between relevant authorities and stakeholders.

Microplastics occurrence, detection and removal with emphasis on insect larvae gut microbiota

Microplastics have been identified in all living forms including human beings, the present need is to restrain its spread and devise measures to remediate microplastics from polluted ecosystems. In this regard, the present review emphasizes on the occurrence, sources detection and toxic effects of microplastics in various ecosystems. The removal of microplastics is prevalent by various physico-chemical and biological methods, although the removal efficiency by biological methods is low. It has been noted that the degradation of plastics by insect gut larvae is a well-known aspect, however, the underlying mechanism has not been completely identified. Studies conducted have shown the magnificent contribution of gut microbiota, which have been isolated and exploited for microplastic remediation. This review also focuses on this avenue, as it highlights the contribution of insect gut microbiota in microplastic degradation along with challenges faced and future prospects in this area.

Microplastics contamination in the fishes of selected sites in Pasig River and Marikina River in the Philippines

Microplastics (MPs), <5 mm in size, are a concerning pollutant in bodies of water because they can be ingested by biological organisms, posing risks to humans and the environment. This study assessed the extent of MPs contamination in various fish species (Oreochromis niloticus, Arius manillensis, and Pterygoplichthys spp.) in selected sites along two major river systems in the Philippines – Pasig and Marikina Rivers. An optimized Raman microspectroscopy technique was used for imaging and identification of MPs using a mean laser spot size of about 1 μm, which is advantageous in the identification of fibers which have small diameters (<50 μm). It also allowed the simultaneous identification of MPs and their pigment additives, which in turn enabled the tracing of possible sources of these MPs. This is important because the fate and accumulation of MPs in rivers systems, as well as its toxicity is dependent on various factors including polymer type and surface chemistry. Majority of the MPs identified from all the fish species were composed of polypropylene and polyethylene in the form of fragments, which reflects both the widespread use of these polymers for packaging and their environmental fate as riverine plastic debris. Moreover, the detection of MPs in the fish species may affect the food chain and eventually pose health risks for humans. The study could provide guidance on waste and environmental water management in the surrounding region.

The Use of Zebra Mussel (Dreissena polymorpha) as a Sentinel Species for the Microplastic Pollution of Freshwater: The Case of Beyhan Dam Lake, Turkey

The presence of microplastics (MPs) in several components of different ecosystems has aroused great concern and led to numerous studies on MP pollution. Although there has been an increasing number of these studies in aquatic ecosystems, no data about the MP pollution in zebra mussel (Dreissena polymorpha, Pallas 1771) living in Beyhan dam lake (Elazığ, Türkiye) are available. This study aimed to investigate the presence of MPs in freshwater mussel species found in this water reservoir. The distribution and characterization of MPs were investigated by Fourier transform infrared spectroscopy (FTIR) in zebra mussel (D. polymorpha) samples at four different stations. A significant difference in the MP presence between the 1st and 4th stations was observed (p &lt; 0.05). A total of 52 MPs were determined in mussels collected from different stations in Beyhan Dam Lake. A total of 18 MPs of this total (1.80 ± 0.92 MP/individual) were obtained in station 1 and 7 of them (0.70 ± 0.82 MP/individual) were from the 4th station. Results of the MP investigation showed that the dominant color was black, the common size range was 1001–2000 µm, the dominant polymer shape was fiber, and the main polymer type was polypropylene (PP). A positive correlation was found among total MP and factors (length, tissue weight, and MP/individual). The detection of MPs in a freshwater mussel of the Beyhan dam lake can be suggested as a threat indicator and offers the possibility of using D. polymorpha as a bioindicator in the aquatic ecosystems’ MP pollution.

Microplastics in Landfill Leachate: A Comprehensive Review on Characteristics, Detection, and Their Fates during Advanced Oxidation Processes

Microplastics are generated from plastic waste in landfills due to physical, chemical, and biological effects, and eventually enter into the leachate. Leachate is a potential source of environmental microplastics which has not been emphasized. Here, we summarized the investigation of microplastics in leachate in 9 countries from 28 papers, provided a comprehensive review of the sampling, detection, and separation of microplastics in leachate, and elaborated on the quality control in each process. There are more than forty types of microplastics in leachate, with diverse shapes, wide size distribution, and concentrations of 0–25 items/L. Commonly used techniques are FTIR, Raman, SEM, and py-GC–MS for characterizing microplastics, while standardization of micro- or nanoplastics for leachate with a complex composition should be further studied. We also discussed in depth the degradation mechanism of microplastics in advanced oxidation processes (AOPs). Microplastics can be decomposed into small molecules such as aldehydes and ketones, and some can even eventually be degraded into CO2 and H2O in AOPs, which may be further implemented in leachate treatment plants. This review provides the scientific fundamentals for understanding the microplastics in landfill leachate and proposes removal strategies for future research.

Research advances of microplastics and potential health risks of microplastics on terrestrial higher mammals: a bibliometric analysis and literature review.

Microplastics (MPs) have become increasingly serious global problems due to their wide distribution and complicated impacts on living organisms. To obtain a comprehensive overview of the latest research progress on MPs, we conducted a bibliometric analysis combined with a literature review. The results showed that the number of studies on MPs has grown exponentially since 2010. Recently, the hotspot on MPs has shifted to terrestrial ecosystems and biological health risks, including human health risks. In addition, the toxic effects, identification and quantification of MPs are relatively new research hotspots. We subsequently provide a review of MPs studies related to health risks to terrestrial higher mammals and, in particular, to humans, including detection methods and potential toxicities based on current studies. Currently, MPs have been found existing in human feces, blood, colon, placenta and lung, but it is still unclear whether this is associated with related systemic diseases. In vivo and in vitro studies have demonstrated that MPs cause intestinal toxicity, metabolic disruption, reproductive toxicity, neurotoxicity, immunotoxicity through oxidative stress, apoptosis and specific pathways, etc. Notably, in terms of combined effects with pollutants and neurotoxicity, the effects of MPs are still controversial. Future attention should be paid to the detection and quantification of MPs in human tissues, exploring the combined effects and related mechanisms of MPs with other pollutants and clarifying the association between MPs and the development of pre-existing diseases. Our work enhances further understanding of the potential health risks of MPs to terrestrial higher mammals.