Microinjection Method Research Articles

Vector competence of Culex quinquefasciatus for Tembusu virus and viral factors for virus transmission by mosquitoes

The ongoing epidemic of flaviviruses worldwide has underscored the importance of studying flavivirus vector competence, considering their close association with mosquito vectors. Tembusu virus is an avian-related mosquito-borne flavivirus that has been an epidemic in China and Southeast Asia since 2010. However, the reason for the outbreak of Tembusu virus in 2010 remains unclear, and it is unknown whether changes in vector transmission played an essential role in this process. To address these questions, we conducted a study using Culex quinquefasciatus as a model for Tembusu virus infection, employing both oral infection and microinjection methods. Our findings confirmed that both vertical and venereal transmission collectively contribute to the cycle of Tembusu virus within the mosquito population, with persistent infections observed. Importantly, our data revealed that the prototypical Tembusu virus MM_1775 strain exhibited significantly greater infectivity and transmission rates in mosquitoes than did the duck Tembusu virus (CQW1 strain). Furthermore, we revealed that the viral E protein and 3′ untranslated region are key elements responsible for these differences. In conclusion, our study sheds light on mosquito transmission of Tembusu virus and provides valuable insights into the factors influencing its infectivity and transmission rates. These findings contribute to a better understanding of Tembusu virus epidemiology and can potentially aid in the development of strategies to control its spread.

Utilizing Zebrafish Embryos for Replication of Tulane Virus: A Human Norovirus Surrogate

The zebrafish larvae/embryo model has been shown to support the replication of seven strains (G1.7[P7], GII.2[P16], GII.3[P16], GII.4[P4], GII.4[P16], GII.6[P7], and GII.17[P13]) of human norovirus (HuNoV). However, due to challenges in consistently obtaining HuNoV-positive stool samples from clinical sources, evaluating HuNoV surrogates in this model is highly valuable. This study assesses the potential of zebrafish embryos and larvae as a model for Tulane virus (TuV) replication. Three infection methods were examined: microinjection, immersion, and feeding. Droplet digital PCR was used to quantify viral RNA across all three infection methods. Microinjection of 3 nL of TuV into zebrafish embryos (< 6-h post-fertilization) resulted in significant replication, with viral RNA levels reaching 6.22 logs at 4-day post-infection. In contrast, the immersion method showed no replication after immersing 4-day post-fertilization (dpf) larvae in TuV suspension for 6 h. Similarly, no replication was observed with the feeding method, where Paramecium caudatum loaded with TuV were fed to 4 dpf larvae. The findings indicate that the zebrafish embryo model supports TuV replication through the microinjection method, suggesting that TuV may serve as a useful surrogate for studying HuNoV pathogenesis. Additionally, TuV can be utilized in place of HuNoV in method optimization studies using the zebrafish embryo model, circumventing the limited availability of HuNoV.

Improved low-invasive mRNA electroporation method into immature mouse oocytes visualizes protein dynamics during development†.

One of the major causes of oocyte quality deterioration, chromosome segregation abnormalities manifest mainly during meiosis I, which occurs before and during ovulation. However, currently, there is a technical limitation in the introduction of mRNA into premature oocytes without impairing embryonic developmental ability. In this study, we established a low-invasive electroporation (EP) method to introduce mRNA into pre-ovulatory, germinal vesicle (GV) mouse oocytes in an easier manner than the traditional microinjection method. The EP method with an optimized impedance value resulted in the efficient introduction of mRNAs encoding enhanced green fluorescent protein (EGFP) into the GV oocytes surrounded by cumulus cells at a survival rate of 95.0%. Furthermore, the introduction of histone H2B-EGFP mRNA into the GV oocytes labeled most of the oocytes without affecting the blastocyst development rate, indicating the feasibility of the visualization of oocyte chromosomal dynamics that enable us to assay chromosomal integrity in oocyte maturation and cell count in embryonic development. The establishment of this EP method offers extensive assays to select pre-implantation embryos and enables the surveying of essential factors for mammalian oocyte quality determination.

Isolation of Myenteric and Submucosal Plexus from Mouse Gastrointestinal Tract and Subsequent Co-Culture with Small Intestinal Organoids.

Intestinal homeostasis results from the proper interplay among epithelial cells, the enteric nervous system (ENS), interstitial cells of Cajal (ICCs), smooth muscle cells, the immune system, and the microbiota. The disruption of this balance underpins the onset of gastrointestinal-related diseases. The scarcity of models replicating the intricate interplay between the ENS and the intestinal epithelium highlights the imperative for developing novel methods. We have pioneered a sophisticated tridimensional in vitro technique, coculturing small intestinal organoids with myenteric and submucosal neurons. Notably, we have made significant advances in (1) refining the isolation technique for culturing the myenteric plexus, (2) enhancing the isolation of the submucosal plexus-both yielding mixed cultures of enteric neurons and glial cells from both plexuses, and (3) subsequently co-culturing myenteric and submucosal neurons with small intestinal organoids. This co-culture system establishes neural innervations with intestinal organoids, allowing for the investigation of regulatory interactions in the context of gastrointestinal diseases. Furthermore, we have developed a method for microinjecting the luminal space of small intestinal organoids with fluorescently labeled compounds. This technique possesses broad applicability such as the assessment of intestinal permeability, transcytosis, and immunocytochemical and immunofluorescence applications. This microinjection method could be extended to alternative experimental setups, incorporating bacterial species, or applying treatments to study ENS-small intestinal epithelium interactions. Therefore, this technique serves as a valuable tool for evaluating the intricate interplay between neuronal and intestinal epithelial cells (IECs) and shows great potential for drug screening, gene editing, the development of novel therapies, the modeling of infectious diseases, and significant advances in regenerative medicine. The co-culture establishment process spans twelve days, making it a powerful asset for comprehensive research in this critical field.

Nanoparticle-delivered RNAi-based pesticide target screening for the rice pest white-backed planthopper and risk assessment for a natural predator

Vacuolar-type (H+)-ATPase (vATPase) is a conserved multi-subunit eukaryotic enzyme composed of 14 subunits that form a functional complex consisting of an ATP-hydrolytic domain (V1) and a proton-translocation domain (V0). ATP hydrolysis and subsequent H+ translocation rely heavily on a fully assembled V1/V0 complex. Since vATPase is crucial for insect survival, it is a viable molecular target for pest control. However, detailed functional analyses of the 14 subunits and their suitability for pest control have not been fully explored in a single insect species. In this study, we identified 22 vATPase subunit transcripts that correspond to 13 subunits (A1, A2, B, C, D, E, F, G, H, a1, a2, c and d) in the white-backed planthopper (WBPH), Sogatella furcifera, a major hemipteran pest of rice. RNAi screens using microinjection and spray-based methods revealed that the SfVHA-F, SfVHA-a2 and SfVHA-c2 subunits are critical. Furthermore, star polymer (SPc) nanoparticles were utilized to conduct spray-induced and nanoparticle-delivered gene silencing (SI-NDGS) to evaluate the pest control efficacy of RNAi targeting the SfVHA-F, SfVHA-a2 and SfVHA-c2 transcripts. Target mRNA levels and vATPase enzymatic activity were both reduced. Honeydew excreta was likewise reduced in WBPH treated with dsRNAs targeting SfVHA-F, SfVHA-a2 and SfVHA-c2. To assess the environmental safety of the nanoparticle-wrapped dsRNAs, Cyrtorhinus lividipennis Reuter, a major natural enemy of planthoppers, was also sprayed with dsRNAs targeting SfVHA-F, SfVHA-a2 and SfVHA-c2. Post-spray effects of dsSfVHA-a2 and dsSfVHA-c2 on C. lividipennis were innocuous. This study identifies SfVHA-a2 and SfVHA-c2 as promising targets for biorational control of WBPH and lays the foundation for developing environment-friendly RNAi biopesticides.

CRISPR/Cas9-mediated efficient white genome editing in the black soldier fly Hermetia illucens.

The CRISPR/Cas9 system is the most straightforward genome-editing technology to date, enabling genetic engineering in many insects, including the black soldier fly, Hermetia illucens. The white gene plays a significant role in the multifarious life activities of insects, especially the pigmentation of the eyes. In this study, the white gene of H. illucens (Hiwhite) was cloned, identified, and bioinformatically analysed for the first time. Using quantitative real-time polymerase chain reaction (qPCR), we found that the white gene was expressed in the whole body of the adult flies, particularly in Malpighian tubules and compound eyes. Furthermore, we utilised CRISPR/Cas9-mediated genome-editing technology to successfully generate heritable Hiwhite mutants using two single guide RNAs. During Hiwhite genome editing, we determined the timing, method, and needle-pulling parameters for embryo microinjection by observing early embryonic developmental features. We used the CasOT program to obtain highly specific guide RNAs (gRNAs) at the genome-wide level. According to the phenotypes of Hiwhite knockout strains, the pigmentation of larval stemmata, imaginal compound eyes, and ocelli differed from those of the wild type. These phenotypes were similar to those observed in other insects harbouring white gene mutations. In conclusion, our results described a detailed white genome editing process in black soldier flies, which lays a solid foundation for intensive research on the pigmentation pathway of the eyes and provides a methodological basis for further genome engineering applications in black soldier flies.

Easy-to-Use CRISPR-Cas9 Genome Editing in the Cultured Pacific Abalone (Haliotis discus hannai).

The Pacific abalone is an important aquaculture shellfish and serves as an important model in basic biology study. However, the study of abalone is limited by lack of highly efficient and easy-to-use gene-editing tools. In this paper, we demonstrate efficient gene knockout in Pacific abalone using CRISPR-Cas9. We developed a highly effective microinjection method by nesting fertilized eggs in a low-concentration agarose gel. We identified the cilia developmental gene β-tubulin and light-sensitive transmembrane protein r-opsin as target genes and designed highly specific sgRNAs for modifying their genomic sequences. Sanger sequencing of the genomic regions of β-tubulin and r-opsin genes from injected larvae identified various genomic long-fragment deletions. In situ hybridization showed gene expression patterns of β-tubulin and r-opsin were significantly altered in the mosaic mutants. Knocking out β-tubulin in abalone embryos efficiently affected cilia development. Scanning electron microscopy and swimming behavior assay showed defecting cilia and decreased motility. Moreover, knocking out of r-opsin in abalone embryos effectively affected the expression and development of eyespots. Overall, this work developed an easy-to-use mosaic gene knockout protocol for abalone, which will allow researchers to utilize CRISPR-Cas9 approaches to study unexploited abalone biology and will lead to novel breeding methods for this aquaculture species.

Establishing a Zebrafish Model for Borrelia burgdorferi Infection Using Immersion and Microinjection Methods.

Borrelia burgdorferi is the spirochetal bacterium that causes Lyme disease. Even though antimicrobial sensitivity of B. burgdorferi has been widely studied, there is still a need to develop an affordable, practical, high-throughput in vivo model which can be used to find effective antibiotic therapies, especially for the recently discovered persister and biofilm forms. Here, we describe the immersion and microinjection methods to introduce B. burgdorferi spirochetes into zebrafish larvae. The B. burgdorferi-zebrafish model can be produced by immersing 5-day post-fertilization (dpf) zebrafish in a B. burgdorferi culture, or by injecting B. burgdorferi into the hindbrain of zebrafish at 28h post-fertilization (hpf). To demonstrate that B. burgdorferi indeed infect the fish, nested polymerase chain reaction (PCR), reverse transcription PCR (RT-PCR), live fluorescence imaging, histological staining, and wholemount immunohistochemical (IHC) methods can be used on B. burgdorferi-infected zebrafish.

Preclinical Efficacy And Safety Evaluation of AAV-OTOF in DFNB9 Mouse Model And Nonhuman Primate.

OTOF mutations are the principal causes of auditory neuropathy. There are reports on Otof-related gene therapy in mice, but there is no preclinical research on the drug evaluations. Here, Anc80L65 and the mouse hair cell-specific Myo15 promoter (mMyo15) are used to selectively and effectively deliver human OTOF to hair cells in mice and nonhuman primates to evaluate the efficacy and safety of OTOF gene therapy drugs. A new dual-AAV-OTOF-hybrid strategy to transfer full-length OTOF is generated, which can stably restore hearing in adult OTOFp.Q939*/Q939* mice with profound deafness, with the longest duration being at least 150 days, and the best therapeutic effect without difference in hearing from wild-type mice. An AAV microinjection method into the cochlea of cynomolgus monkeys without hearing impairment is further established and found the OTOF can be safely and effectively driven by the mMyo15 promoter in hair cells. In addition, the therapeutic dose of AAV drugs has no impact on normal hearing and does not cause significant systemic toxicity both in mouse and nonhuman primates. In summary, this study develops a potential gene therapy strategy for DFNB9 patients in the clinic and provides complete, standardized, and systematic research data for clinical research and application.

Domain definition and preliminary functional exploration of the endonuclease NOBP-1 in Strongyloides stercoralis

BackgroundRibosome biogenesis is the process of assembling ribosome complexes that regulate cell proliferation and differentiation with potential regulatory effects on development. Many factors regulate ribosome biological processes. Nin one binding protein (Nob1) has received widespread attention as key genes regulating ribosome biogenesis—the 3ʹ end of the 20S rRNA is cleaved by Nob1 at cleavage site D to form 18S rRNA, generating translationally capable 40S subunit. As a ribosome biogenesis factor, Nob1 may regulate the development of organisms, but almost nothing is known about the function of Nob1 for any parasitic nematode. We explored the functional role of NOBP-1 (the homologous gene of Nob1) encoding gene from a parasitic nematode—Strongyloides stercoralis.MethodsThe full-length cDNA, gDNA and promoter region of Ss-nobp-1 was identified using protein BLAST in WormBase ParaSite according to the Caenorhabditis elegans NOBP-1 sequence to analyze the gene structure. RNA sequencing (RNA-seq) data in wormbase were retrieved and analyzed to assess the transcript abundance of Ss-nobp-1 in seven developmental stages of S. stercoralis. The standard method for gonadal microinjection of constructs was carried out to determine the anatomic expression patterns of Ss-nobp-1. The interaction between Ss-NOBP-1 and partner of NOBP-1 (Ss-PNO-1) was assessed by yeast two-hybridization and bimolecular fluorescence complementarity (BiFC) experiments.ResultsThe NOBP-1 encoding gene Ss-nopb-1 from the zoonotic parasite S. stercoralis has been isolated and characterized. The genomic DNA representing Ss-nobp-1 includes a 1599-bp coding region and encodes a protein comprising 403 amino acids (aa), which contains conserved PIN domain and zinc ribbon domain. RNA-seq analysis revealed that Ss-nobp-1 transcripts are present throughout the seven developmental stages in S. stercoralis and have higher transcription levels in iL3, L3 and P Female. Ss-nobp-1 is expressed mainly in the intestine of transgenic S. stercoralis larvae, and there is a direct interaction between Ss-NOBP-1 and Ss-PNO-1.ConclusionsCollectively, Ss-NOBP-1 has a potential role in embryo formation and the infective process, and findings from this study provide a sound foundation for investigating its function during the development of parasitic nematode.Graphical

Mosquito Embryo Microinjection under Halocarbon Oil or in Aqueous Solution.

The process of genetically modifying mosquitoes requires skilled delivery of reagents for modification. Plasmids, RNA, DNA, and/or protein must be transported into the developing embryo during an appropriate time in development when these agents will have access to the genome. Embryo microinjection has been the main method by which such modifying agents have been delivered. Ideally the microinjection process will deliver these modifying agents in sufficient quantity to effect the genetic modification without severely damaging or killing the injected embryo in the process. As semiaquatic insects, mosquitoes have embryos that are susceptible to desiccation and the degree to which embryos are susceptible is based on species. Two microinjection methods are outlined here. The first method describes embryo microinjections performed under Halocarbon-27 oil. The oil is used to reduce desiccation during the injection process. A second method limits desiccation by injecting the mosquito embryos in water. In both procedures, the embryos are first aligned and then injected before the embryos cellularize, ∼1 h and 45 min after oviposition.

Innovative Strategies of Reprogramming Immune System Cells by Targeting CRISPR/Cas9-Based Genome-Editing Tools: A New Era of Cancer Management.

The recent developments in the study of clustered regularly interspaced short palindromic repeats/associated protein 9 (CRISPR/Cas9) system have revolutionized the art of genome-editing and its applications for cellular differentiation and immune response behavior. This technology has further helped in understanding the mysteries of cancer progression and possible designing of novel antitumor immunotherapies. CRISPR/Cas9-based genome-editing is now often used to engineer universal T-cells, equipped with recombinant T-cell receptor (TCR) or chimeric antigen receptor (CAR). In addition, this technology is used in cytokine stimulation, antibody designing, natural killer (NK) cell transfer, and to overcome immune checkpoints. The innovative potential of CRISPR/Cas9 in preparing the building blocks of adoptive cell transfer (ACT) immunotherapy has opened a new window of antitumor immunotherapy and some of them have gained FDA approval. The manipulation of immunogenetic regulators has opened a new interface for designing, implementation and interpretation of CRISPR/Cas9-based screening in immuno-oncology. Several cancers like lymphoma, melanoma, lung, and liver malignancies have been treated with this strategy, once thought to be impossible. The safe and efficient delivery of CRISPR/Cas9 system within the immune cells for the genome-editing strategy is a challenging task which needs to be sorted out for efficient immunotherapy. Several targeting approaches like virus-mediated, electroporation, microinjection and nanoformulation-based methods have been used, but each procedure offers some limitations. Here, we elaborate the recent updates of cancer management through immunotherapy in partnership with CRISPR/Cas9 technology. Further, some innovative methods of targeting this genome-editing system within the immune system cells for reprogramming them, as a novel strategy of anticancer immunotherapy is elaborated. In addition, future prospects and clinical trials are also discussed.

Zebrafish Injectable Plastic for Identification Tagging (ZIP IT) for larvae to adults using a fluorescent Visible Implant Elastomer

Distinguishing individuals or small groups is essential for many experiments. The regenerative properties of zebrafish make traditional marking methods for rodent models (e.g., tattoos, tissue clipping) ineffective. Fluorescent Visible Implant Elastomer (VIE) can permanently mark juvenile and adult zebrafish but to date no marking technique has been described for larval stage zebrafish. This protocol, Zebrafish Injectable Plastic for Identification Tagging (ZIP IT), utilizes VIE in zebrafish as early as 2 days post fertilization (dpf) using standard microinjection methods and direct injection using an insulin syringe at one month. Larval zebrafish between 2 and 7 dpf were injected in the dorsal musculature. At one month, retention and visibility of the VIE was observed in 72% of the injected fish with no effect on growth; however, a variable change in mortality was observed, generally higher than the uninjected fish. This demonstrates that VIE can be used in very early stages of fish development, providing the first procedure to track individuals or groups within a larger population. Subcutaneous injection of juvenile zebrafish starting at one month has greater than 99%-mark retention and visibility with very low mortality. The combination of larvae and juvenile VIE injections also provide a powerful tool to track and gather data from marked fish throughout their lifespan.•We present a method for tagging individuals or groups of zebrafish at most life stages (larvae or juvenile/adult) with Visible Implant Elastomer (VIE).•The larvae and juvenile injection procedures can be combined so that an individual fish can be tagged for its entire lifetime. Larvae injections become significantly less visible after one month; however, the fish can be reinjected using the juvenile procedure, thus allowing continuity of the visible mark.•This protocol was empirically built on the “Evaluation of VIE tags in Zebrafish (Danio rerio)” by Hohn and Petrie-Hanson (2013) and expanded to include larvae and a small batch elastomer mixing technique.

Magnetic-directed fillers migration during micro-injection molding of magnetic polypropylene nanocomposite surfaces with uplifted light trapping microarchitectures for freezing delay and photothermal-enhanced de-icing

Micro-roughness and low-surface-energy anti-icing surfaces attract tremendous interest from researchers due to superhydrophobicity and low ice affinity. However, the rapid fabrication of superhydrophobic surfaces (SHS) without developed microstructure via template methods has been the bottleneck for further applications. In this work, ferroferric oxide (Fe3O4) loaded with graphene (GP) as magnetic nanoparticles are introduced into the polypropylene (PP) matrix as a heat vehicle for superhydrophobic anti-icing/de-icing surfaces. Microarchitectured PP/GP/Fe3O4 surfaces are fabricated via a combining method of micro-injection molding and magnetic attraction. An analysis of directed particles migration with magnetic attraction is conducted using a multi-physical field coupling model. The magnetic attraction boosts micropillars with a height from ∼85 to ∼150 μm and keeps surfaces maintaining water contact angles at a high level (∼153°) and the stable air plastron for repetitive droplet impacting at an initial velocity of 1 m s−1. With full-grown micropillars, light can be absorbed more efficiently by elongating the optical path for multiple reflections to occur. In comparison with neat PP surface, the light-to-heat performance of the composite surface shows an increase in temperature from ambient to 94 °C within 67 s under one sun irradiation at an intensity of 1 kW m−2 and a decrease in ice adhesion strength from ∼30 to ∼9 kPa within the same period. The photothermal efficacy of the magnetic particles confers a prolonged delay in icing on SHS. A practical application of manufacturing of SHS is expected to be possible due to their excellent passive anti-icing and active de-icing properties for outdoor injection parts.

Simple cost‐effective larval injection method for dsRNA delivery to induce RNAi response in Helicoverpa armigera (Hübner)

AbstractMicroinjection is considered as an effective method for dsRNA delivery in insects. It also facilitates the delivery of a precise quantity of dsRNA in the host insect, inducing an efficient RNAi response. However, the microinjection method needs prior optimization of several parameters like concentration of dsRNA, site of injection, developmental stage of insect etc. for inducing effective RNAi response. Moreover, sophisticated microinjection devices are largely expensive with high maintenance cost. The Old‐World bollworm, Helicoverpa armigera (Hübner) is known to be a detrimental polyphagous pest with widespread infestations across the globe. In the present study, we demonstrate a low‐cost and effective dsRNA delivery method for inducing RNAi response in H. armigera with the aid of basic insulin injection syringe and fabricated micropipette tip. In order to validate the RNAi response following dsRNA injection, we have selected three key genes from the chitin biosynthesis pathway of the insect. Besides these, argonaute 1 (ago1) was also used as an indicator gene for dsRNA‐mediated RNAi induction. Delivery of dsRNA using injection with insulin syringe caused significant upregulation of the ago1 gene in the insect irrespective of any of the three target genes concerned viz. HaNAGK (3.9 fold; p &lt; 0.001), HaAGM (6.3 fold; p &lt; 0.001) and HaUAP (5.9 fold; p &lt; 0.01) respectively, as compared to control injected with nuclease‐free water. The dsRNA‐injected insects showed aberrant developmental symptoms typical of impeded chitin synthesis, eventually leading to anomalous ecdysis with substantial mortality (up to 69.04%), as compared to controls. The described protocol reduces insect injury, enabling easy restraining of larva and quick execution of dsRNA injection with efficient RNAi response.

Past, present and future prospect on microinjection gene transfer in aquaculture

Microinjection is arguably the most direct and reliable gene transfer method to date. Since the development of the first transgenic fish in 1984, microinjection continues to be the most commonly used gene transfer method in aquaculture. Microinjection is used to inject cells, nucleic acid, gene constructs, recombinant DNA, and morpholino oligonucleotides into fish cells, embryos, and larvae. Despite the development of various gene transfer methods, microinjection is preferable. Continuous improvement in micromanipulation tools and micro capillary further develop microinjection method. This review describes the past and present use of microinjection gene transfer methods for genetic manipulation and genetic improvement in fisheries and aquaculture, especially in fish transgenesis. Furthermore, we discuss the future prospects of microinjection method in tandem with recombinant DNA technology and CRISPR-Cas9 and its application in the aquaculture industry.

A more accurate analysis of maternal effect genes by siRNA electroporation into mouse oocytes.

Maternal RNA and proteins accumulate in mouse oocytes and regulate initial developmental stages. Sperm DNA combines with protamine, which is exchanged after fertilization with maternal histones, including H3.3; however, the effect of H3.3 on development post-fertilization remains unclear. Herein, we established an electroporation method to introduce H3.3 siRNA into germinal vesicle (GV)-stage oocytes without removing cumulus cells. Oocyte-attached cumulus cells need to be removed during the traditional microinjection method; however, we confirmed that artificially removing cumulus cells from oocytes reduced fertilization rates, and oocytes originally free of cumulus cells had reduced developmental competence. On introducing H3.3 siRNA at the GV stage, H3.3 was maintained in the maternal pronucleus and second polar body but not in the paternal pronucleus, resulting in embryonic lethality after fertilization. These findings indicate that H3.3 protein was not incorporated into the paternal pronucleus, as it was repeatedly translated and degraded over a relatively short period. Conversely, H3.3 protein incorporated into the maternal genome in the GV stage escaped degradation and remained in the maternal pronucleus after fertilization. This new method of electroporation into GV-stage oocytes without cumulus cell removal is not skill-intensive and is essential for the accurate analysis of maternal effect genes.

Efficient Genome Editing of Mice by CRISPR Electroporation of Zygotes.

With exceptional efficiency, accuracy, and ease, the CRISPR/Cas9 system has significantly improved genome editing in cell culture and lab animal experiments. When generating animal models, the electroporation of zygotes offers higher efficiency, simplicity, cost, and throughput as an alternative to the gold standard method of microinjection. Electroporation is also gentler, with higher viability, and reliably delivers Cas9/single-guide RNA (sgRNA) ribonucleoproteins (RNPs) into the zygotes of common laboratory mouse strains (e.g., C57BL/6J and C57BL/6N) that approaches 100% delivery efficiency. This technique enables insertion/deletion (indels) mutations, point mutations, the deletion of whole genes or exons, and small insertions in the range of 100-200 bp to insert LoxP or short tags like FLAG, HA, or V5. While constantly being improved, here we present the current state of CRISPR-EZ in a protocol that includes sgRNA production through in vitro transcription, embryo processing, RNP assembly, electroporation, and the genotyping of preimplantation embryos. A graduate-level researcher with minimal experience manipulating embryos can obtain genetically edited embryos in less than 1 week using this protocol. Here, we offer a straightforward, low-cost, efficient, high-capacity method that could be used with mouse embryos.

Embryological Aspects of Creating a New Humanized Transgenic Mouse Line with an Integrated Human Gene &lt;i&gt;HLA A*02:01:01:01&lt;/i&gt;

The accumulation of scientific data in the field of pharmacogenetics requires the creation of adequate biomodels to reflect the immunogenetic characteristics of different population groups. We have obtained the ancestors of a new humanized transgenic mouse line carrying the human HLA-A*02:01:01:01 gene, which is characteristic of the Russian population. The new biomodels was created using the pronuclei microinjection method of a linearized fragment of genetically engineered DNA construct into zygotes, followed by overnight cultivation in CO2 incubator and transfer of potentially modified embryos at the stage of two 4.0 blastomere to pseudopregnant foster females. A total of 91 living offspring were obtained and analyzed, with 18 pups carrying the target genome modification. The resulting transgenic animals were used to create a new line of mouse biomodels carrying the human HLA-A*02:01:01:01 gene.

A Major Recessive Gene Associated with Anthracnose (Colletotrichum capsici) Resistance in Chilli Pepper

Chilli anthracnose caused by Colletotrichum sp., is an important disease in Bangladesh and many other Asian countries. Recently the local Bangladeshi genotype ‘Comilla-2’ was found resistant to C. capsici. Inheritance of resistant to C. capsici was analyzed in segregating populations derived from a cross of ‘BARI chilli-1’ x ‘Comilla-2’. BARI chilli-1 as susceptible and Comilla-2 as resistant parent was used in the study. Detached matured green fruits were inoculated using the microinjection method. Disease response was evaluated using disease incidence and over all lesion diameter at 8 days after inoculation. The disease reaction of F1 plants in case of disease incidence and overall lesion diameter were clearly skewed to the susceptible parent, with average values of 46.70% and 13.2 mm, respectively. The distribution of disease incidence in the F2 population was skewed toward the susceptible parent and the distribution of overall lesion diameter in the F2 population showed a similar trend. Based on the scale of resistance and susceptibility, less than 25.0% disease incidence or less than 9.0 mm overall lesion diameter were evaluated as resistance. In the cross ‘BARI chilli-1’ x ‘Comilla-2’, the segregation ratios of resistance and susceptibility scored by disease incidence and overall lesion diameter in the F2 , BCr and BCs populations and chi-squared test significantly fitted one recessive gene model i.e. 1:3 Mendelian model. The result indicates that the resistance of ‘Comilla-2’ to C. capsici is controlled by a single recessive gene.