Microfluidic Shear Research Articles

Microfluidic detachment assay to probe the adhesion strength of diatoms

Fouling release (FR) coatings are increasingly applied as an environmentally benign alternative for controlling marine biofouling. As the technology relies on removing fouling by water currents created by the motion of ships, weakening of adhesion of adherent organisms is the key design goal for improved coatings. In this paper, a microfluidic shear force assay is used to quantify how easily diatoms can be removed from surfaces. The experimental setup and the optimization of the experimental parameters to study the adhesion of the diatom Navicula perminuta are described. As examples of how varying the physico-chemical surface properties affects the ability of diatoms to bind to surfaces, a range of hydrophilic and hydrophobic self-assembled monolayers was compared. While the number of cells that attached (adhered) was barely affected by the coatings, the critical shear stress required for their removal from the surface varied significantly.

Automation Highlights from the Literature

Automation Highlights from the Literature

Single cell adhesion assay using computer controlled micropipette.

Cell adhesion is a fundamental phenomenon vital for all multicellular organisms. Recognition of and adhesion to specific macromolecules is a crucial task of leukocytes to initiate the immune response. To gain statistically reliable information of cell adhesion, large numbers of cells should be measured. However, direct measurement of the adhesion force of single cells is still challenging and today’s techniques typically have an extremely low throughput (5–10 cells per day). Here, we introduce a computer controlled micropipette mounted onto a normal inverted microscope for probing single cell interactions with specific macromolecules. We calculated the estimated hydrodynamic lifting force acting on target cells by the numerical simulation of the flow at the micropipette tip. The adhesion force of surface attached cells could be accurately probed by repeating the pick-up process with increasing vacuum applied in the pipette positioned above the cell under investigation. Using the introduced methodology hundreds of cells adhered to specific macromolecules were measured one by one in a relatively short period of time (∼30 min). We blocked nonspecific cell adhesion by the protein non-adhesive PLL-g-PEG polymer. We found that human primary monocytes are less adherent to fibrinogen than their in vitro differentiated descendants: macrophages and dendritic cells, the latter producing the highest average adhesion force. Validation of the here introduced method was achieved by the hydrostatic step-pressure micropipette manipulation technique. Additionally the result was reinforced in standard microfluidic shear stress channels. Nevertheless, automated micropipette gave higher sensitivity and less side-effect than the shear stress channel. Using our technique, the probed single cells can be easily picked up and further investigated by other techniques; a definite advantage of the computer controlled micropipette. Our experiments revealed the existence of a sub-population of strongly fibrinogen adherent cells appearing in macrophages and highly represented in dendritic cells, but not observed in monocytes.

A microfluidic shear device that accommodates parallel high and low stress zones within the same culturing chamber.

Fluid shear stress (FSS) plays a critical role in regulating endothelium function and maintaining vascular homeostasis. Current microfluidic devices for studying FSS effects on cells either separate high shear stress zone and low shear stress zone into different culturing chambers, or arranging the zones serially along the flow direction, which complicates subsequent data interpretation. In this paper, we report a diamond shaped microfluidic shear device where the high shear stress zone and the low shear stress zone are arranged in parallel within one culturing chamber. Since the zones with different shear stress magnitudes are aligned normal to the flow direction, the cells in one stress group are not substantially affected by the flow-induced cytokine/chemokine releases by cells in the other group. Cell loading experiments using human umbilical vein endothelial cells show that the device is able to reveal stress magnitude-dependent and loading duration-dependent cell responses. The co-existence of shear stress zones with varied magnitudes within the same culturing chamber not only ensures that all the cells are subject to the identical culturing conditions, but also allows the resemblance of the differential shear stress pattern in natural arterial conditions. The device is expected to provide a new solution for studying the effects of heterogeneous hemodynamic patterns in the onset and progression of various vascular diseases.

Microfluidic shear stress-regulated surfactant secretion in alveolar epithelial type II cells in vitro

We investigated the role of flow-induced shear stress on the mechanisms regulating surfactant secretion in type II alveolar epithelial cells (ATII) using microfluidic models. Following flow stimulation spanning a range of wall shear stress (WSS) magnitudes, monolayers of ATII (MLE-12 and A549) cells were examined for surfactant secretion by evaluating essential steps of the process, including relative changes in the number of fusion events of lamellar bodies (LBs) with the plasma membrane (PM) and intracellular redistribution of LBs. F-actin cytoskeleton and calcium levels were analyzed in A549 cells subjected to WSS spanning 4-20 dyn/cm(2). Results reveal an enhancement in LB fusion events with the PM in MLE-12 cells upon flow stimulation, whereas A549 cells exhibit no foreseeable changes in the monitored number of fusion events for WSS levels ranging up to a threshold of ∼8 dyn/cm(2); above this threshold, we witness instead a decrease in LB fusion events in A549 cells. However, patterns of LB redistribution suggest that WSS can potentially serve as a stimulus for A549 cells to trigger the intracellular transport of LBs toward the cell periphery. This observation is accompanied by a fragmentation of F-actin, indicating that disorganization of the F-actin cytoskeleton might act as a limiting factor for LB fusion events. Moreover, we note a rise in cytosolic calcium ([Ca(2+)]c) levels following stimulation of A549 cells with WSS magnitudes ranging near or above the experimental threshold. Overall, WSS stimulation can influence key components of molecular machinery for regulated surfactant secretion in ATII cells in vitro.

A novel tool for dynamic cell adhesion studies – the De-Adhesion Number Investigator DANI

For an optimal implementation of materials, such as, e.g. medical implants in living environments, a thorough characterization of cell adhesion, kinetics and strength is required, as well as a prerequisite e.g. for bone integration. Here we present a miniaturized (~100 μl) lab-on-a-chip implant hybrid system which allows quantification of cell adhesion under dynamic conditions mimicking those of physiological relevance. Surface acoustic waves are excited and used on optical transparent chips to induce micro acoustic streaming and to create a microfluidic shear spectrum ranging from 0 to ~35 s(-1). We demonstrate its potential for a time-efficient, dynamic screening test of new implant materials using a model of an osseointegration with SAOS-2 cells. The upside-down orientation also allows utilization of the micro reactor on non-transparent materials like titanium and diamond-like-carbon (DLC).

Slit2 Prevents Neutrophil Recruitment and Renal Ischemia-Reperfusion Injury

Neutrophils recruited to the postischemic kidney contribute to the pathogenesis of ischemia-reperfusion injury (IRI), which is the most common cause of renal failure among hospitalized patients. The Slit family of secreted proteins inhibits chemotaxis of leukocytes by preventing activation of Rho-family GTPases, suggesting that members of this family might modulate the recruitment of neutrophils and the resulting IRI. Here, in static and microfluidic shear assays, Slit2 inhibited multiple steps required for the infiltration of neutrophils into tissue. Specifically, Slit2 blocked the capture and firm adhesion of human neutrophils to inflamed vascular endothelial barriers as well as their subsequent transmigration. To examine whether these observations were relevant to renal IRI, we administered Slit2 to mice before bilateral clamping of the renal pedicles. Assessed at 18 hours after reperfusion, Slit2 significantly inhibited renal tubular necrosis, neutrophil and macrophage infiltration, and rise in plasma creatinine. In vitro, Slit2 did not impair the protective functions of neutrophils, including phagocytosis and superoxide production, and did not inhibit neutrophils from killing the extracellular pathogen Staphylococcus aureus. In vivo, administration of Slit2 did not attenuate neutrophil recruitment or bacterial clearance in mice with ascending Escherichia coli urinary tract infections and did not increase the bacterial load in the livers of mice infected with the intracellular pathogen Listeria monocytogenes. Collectively, these results suggest that Slit2 may hold promise as a strategy to combat renal IRI without compromising the protective innate immune response.

Influence of microfluidic shear on keratin networks in living cells

Intermediate filaments play a key role in cell mechanics, providing cells with compliance to small deformations and reinforcing them when large forces are applied. Here, we present a study of networks of keratin intermediate filaments in living cells under the influence of external forces. We expose the cells to controlled shear forces applied by microflow and investigate the response of the keratin network in situ. Our results show that bundle dynamics are reduced upon the application of shear flow. It is likely that cytoskeletal cross-talk is involved in this shear stress response via actin–keratin coupling.

Measurement of Lipid Bilayer Viscosity by Microfluidic Shear Transmission

We use an experimental method for measuring shear transmission through an anchored hemispherical vesicle to estimate the viscosity for several different lipid membranes. We also validate predicted flow patterns and confirm a recently calculated universal ratio [1] for the flow geometry. Comparing experimental with calculated results provides insight about how membrane viscosity contributes to flow patterns in biological configurations, such as characean algae cells, where a lipid membrane experiences strong shear flow [2]. We apply a similar flow to vesicles containing an electrostatically coupled actin cortex in order to observe the effects of external flow on reorganization of proteins inside the vesicle.

Production of highly aligned collagen lamellae by combining shear force and thin film confinement

Load-bearing tissues owe their mechanical strength to their highly anisotropic collagenous structure. To date attempts to engineer mechanically strong connective tissue have failed, mainly due to a lack of ability to reproduce the native collagen organization in constructs synthesized by cultured cells in vitro. The ability to influence the orientation of self-assembling collagen molecules to produce highly anisotropic structures has applications ranging from de novo engineering of complex tissues to the production of organized scaffolds for cell culture contact guidance. In this investigation we have used the simple technique of spin-coating to produce highly aligned arrays of collagen fibrils. By a simple modification of the method we have also successfully produced orthogonal collagen lamellae. Alternating collagen lamellae are frequently seen in load-bearing tissues such as cornea, annulus fibrosus, and cortical bone. Culturing of corneal fibroblasts on aligned collagen shows that the cells adopt the organization of fibrils. In this investigation we observed the reversal of fibrillar growth direction or “hook” formation similar to that seen previously in a microfluidic shear flow chamber. Although the results of this investigation clearly show that it is possible to produce small areas (1 cm 2) of collagen fibrils with enough alignment to guide fibroblasts, there is evidence that thin film instabilities are likely to be a significant barrier to producing organized collagen fibrils over larger areas. Successful application of this method to produce highly controlled and organized collagenous structures will require the development of techniques to control thin film instability and will be the subject of future work.

Direct Numerical Simulation of Single Leukocyte Deformation in Microchannel Flow for Disease Diagnosis

To better understand the physical mechanism of leukocyte separation via microfluidics, a level set method was employed to analyze the coupled deformation-flow of individual leukocytes in microfluidic parabolic shear blood flow. The results show that: (1) Weber number and viscosity ratio have great effects on the deformation of single leukocyte, (2) difference between the deformation and motion behavior of different subtypes of leukocytes (i.e., granulocytes, lymphocytes, monocytes) was observed, and (3) the existence of a second leukocyte significantly changes the leukocyte deformation and motion. These results shed light on the understanding of the motion and deformation of leukocytes in microchannel flow and provide a theoretical foundation for separating lymphocytes via microfluidics.

Quantification of the adhesion strength of fibroblast cells on ethylene glycol terminated self-assembled monolayers by a microfluidic shear force assay

The adhesion strength of cells depends on the properties of the surface they attach to. Varying the surface properties can trigger different cellular responses such as differentiation. In order to study cell adhesion quantitatively, we developed a microfluidic shear force assay which allows the variation of applied shear stress by five orders of magnitude. With this device we can determine the critical shear stress which is necessary to remove 50% of the adherent cells. As an application we investigated the adhesion strength of cells on a series of oligo(ethylene glycol) (OEG) containing self-assembled monolayers (SAMs). By varying the number of ethylene oxide units, the hydration properties of the monolayers are changed. We found that cell adhesion strength for mammalian fibroblasts decreases if the hydration of the surface is increased. As the cell spreading area changes with the substrate properties, the adhesion strength per unit area was additionally determined.

Bioconjugation techniques for microfluidic biosensors

We have evaluated five bioconjugation chemistries for immobilizing DNA onto silicon substrates for microfluidic biosensing applications. Conjugation by organosilanes is compared with linkage by carbonyldiimidazole (CDI) activation of silanol groups and utilization of dendrimers. Chemistries were compared in terms of immobilization and hybridization density, stability under microfluidic flow-induced shear stress, and stability after extended storage in aqueous solutions. Conjugation by dendrimer tether provided the greatest hybridization efficiency; however, conjugation by aminosilane treated with glutaraldehyde yielded the greatest immobilization and hybridization densities, as well as enhanced stability to both shear stress and extended storage in an aqueous environment. Direct linkage by CDI activation provided sufficient immobilization and hybridization density and represents a novel DNA bioconjugation strategy. Although these chemistries were evaluated for use in microfluidic biosensors, the results provide meaningful insight to a number of nanobiotechnology applications for which microfluidic devices require surface biofunctionalization, for example vascular prostheses and implanted devices.

Peptide-Mediated Selective Adhesion of Smooth Muscle and Endothelial Cells in Microfluidic Shear Flow

Microfluidic devices have recently emerged as effective tools for cell separation compared to traditional techniques. These devices offer the advantages of small sample volumes, low cost, and high purity. Adhesion-based separation of cells from heterogeneous suspensions can be achieved by taking advantage of specific ligand-receptor interactions. The peptide sequences Arg-Glu-Asp-Val (REDV) and Val-Ala-Pro-Gly (VAPG) are known to bind preferentially to endothelial cells (ECs) and smooth muscle cells (SMCs), respectively. This article examines the roles of REDV and VAPG and fluid shear stress in achieving selective capture of ECs and SMCs in microfluidic devices. The adhesion of ECs in REDV-coated devices and SMCs in VAPG-coated devices increases significantly compared to that of the nontargeted cells with decreasing shear stress. Furthermore, the adhesion of these cells is shown to be independent of whether these cells flow through the devices as suspensions of only one cell type or as a heterogeneous suspension containing ECs, SMCs, and fibroblasts. Whereas the overall adhesion of cells in the devices is determined mainly by shear stress, the selectivity of adhesion depends on the type of peptide and on the device surface as well as on the shear stress.

Theoretical model and experimental study of red blood cell (RBC) deformation in microchannels

The motion and deformation of red blood cells (RBCs) flowing in a microchannel were studied using a theoretical model and a novel automated rheoscope. The theoretical model was developed to predict the cells deformation under shear as a function of the cells geometry and mechanical properties. Fluid dynamics and membrane mechanics are incorporated, calculating the traction and deformation in an iterative manner. The model was utilized to evaluate the effect of different biophysical parameters, such as: inner cell viscosity, membrane shear modulus and surface to volume ratio on deformation measurements. The experimental system enables the measurement of individual RBCs velocity and their deformation at defined planes within the microchannel. Good agreement was observed between the simulation results, the rheoscope measurements and published ektacytometry results. The theoretical model results imply that such deformability measuring techniques are weakly influenced by changes in the inner viscosity of the cell or the ambient fluid viscosity. However, these measurements are highly sensitive to RBC shear modulus. The shear modulus, estimated by the model and the rheoscope measurements, falls between the values obtained by micropipette aspiration and laser trapping. The study demonstrates the integration of a theoretical model with a microfabricated device in order to achieve a better understanding of RBC mechanics and their measurement using microfluidic shear assays. The system and the model have the potential of serving as quantitative clinical tools for diagnosing deformability disorders in RBCs.

Microfluidic shear devices for quantitative analysis of cell adhesion.

We describe the design, construction, and characterization of microfluidic devices for studying cell adhesion and cell mechanics. The method offers multiple advantages over previous approaches, including a wide range of distractive forces, high-throughput performance, simplicity in experimental setup and control, and potential for integration with other microanalytic modules. By manipulating the geometry and surface chemistry of the microdevices, we are able to vary the shear force and the biochemistry during an experiment. The dynamics of cell detachment under different conditions can be captured simultaneously using time-lapse videomicroscopy. We demonstrate assessment of cell adhesion to fibronectin-coated substrates as a function of the shear stress or fibronectin concentration in microchannels. Furthermore, a combined perfusion-shear device is designed to maintain cell viability for long-term culture as well as to introduce exogenous reagents for biochemical studies of cell adhesion regulation. In agreement with established literature, we show that fibroblasts cultured in the combined device reduced their adhesion strength to the substrate in response to epidermal growth factor stimulation.