Microfluidic Culture Research Articles

Reproduction of Large-Scale Bioreactor Conditions on Microfluidic Chips.

Microbial cells in industrial large-scale bioreactors are exposed to fluctuating conditions, e.g., nutrient concentration, dissolved oxygen, temperature, and pH. These inhomogeneities can influence the cell physiology and metabolism, e.g., decelerate cell growth and product formation. Microfluidic systems offer new opportunities to study such effects in great detail by examining responses to varying environmental conditions at single-cell level. However, the possibility to reproduce large-scale bioreactor conditions in microscale cultivation systems has not yet been systematically investigated. Hence, we apply computational fluid dynamics (CFD) simulations to analyze and compare three commonly used microfluidic single-cell trapping and cultivation devices that are based on (i) mother machines (MM), (ii) monolayer growth chambers (MGC), and (iii) negative dielectrophoresis (nDEP). Several representative time-variant nutrient concentration profiles are applied at the chip entry. Responses to these input signals within the studied microfluidic devices are comparatively evaluated at the positions of the cultivated cells. The results are comprehensively presented in a Bode diagram that illustrates the degree of signal damping depending on the frequency of change in the inlet concentration. As a key finding, the MM can accurately reproduce signal changes that occur within 1 s or slower, which are typical for the environmental conditions observed by single cells in large-scale bioreactors, while faster changes are levelled out. In contrast, the nDEP and MGC are found to level out signal changes occurring within 10 s or faster, which can be critical for the proposed application.

SUN-LB045 Microfluidic and Static Culture of Human Testicular Tissue

Testicular tissue culture has been used as a method to study testicular physiology for over 100 years. However, most of these investigations rely upon rodent tissues, and the translation of these techniques to the human model has proven comparably challenging. This is a critical gap in our fundamental knowledge of human testis biology and limits the value of testicular tissues currently being cryopreserved for men and boys requiring fertility preservation. To meet these twin objectives, maintaining or maturing human testicular tissues ex vivo must be accomplished using new technologies. Microfluidics is an emerging technology that has been developed to support cells ex vivo and has resulted in longer lived tissue function, including the murine ovary and human female reproductive tract. Recent work in the microfluidic culture of murine testes has also demonstrated superior germ cell maintenance comparatively with static culture. For these reasons, we hypothesized that the microfluidic culture will similarly improve and extend the viability of cultured human testicular tissue, while also enabling investigations into endocrine function through a non-invasive manner. To test our hypothesis, we cultured human testicular tissue in both microfluidic and static conditions. Our microfluidic culture system is composed of inert materials (optimal for the recovery of steroid and peptide hormones), and was run at a 40 μL/hour flow rate. Adult human tissues were donated through an IRB-approved autopsy protocol. Tissues were cultured at an air-liquid interface in both culture conditions for upwards of 2 weeks and in the presence of gonadotropins (hCG and FSH). At the completion of culture, tissues were fixed and processed for histological analysis, and major cell types and structures were identified. Secreted testosterone and Inhibin B within culture media was quantified via enzyme-linked immunosorbent assay. Cultured tissues demonstrated a dramatic reduction in germ cell number in both static and microfluidic conditions. However, tissues cultured in microfluidics demonstrated reduced tubule basement membrane breakdown and structural degeneration. Tissues cultured in both conditions were productive of secreted testosterone and inhibin B. In conclusion, the present study has explored the utility of microfluidics for human testicular culture. Similar to other tissues, microfluidic culture supported higher viability and better tissue integrity compared to static. Furthermore, microfluidic culture was a convenient way to study secreted hormones over time. Dissimilar to murine microfluidic reports, germ cell populations were not maintained in our studies, yet work is continuing to improve this outcome. Funding: This work was funded by a UH3 grant under the NIEHS and a F31 grant under the NICHD at the National Institutes of Health. Unless otherwise noted, all abstracts presented at ENDO are embargoed until the date and time of presentation. For oral presentations, the abstracts are embargoed until the session begins. s presented at a news conference are embargoed until the date and time of the news conference. The Endocrine Society reserves the right to lift the embargo on specific abstracts that are selected for promotion prior to or during ENDO.

Tubing-Free Microfluidic Microtissue Culture System Featuring Gradual, in vivo-Like Substance Exposure Profiles.

In vitro screening methods for compound efficacy and toxicity to date mostly include cell or tissue exposure to preset constant compound concentrations over a defined testing period. Such concentration profiles, however, do not represent realistic in vivo situations after substance uptake. Absorption, distribution, metabolism and excretion of administered substances in an organism or human body entail gradually changing pharmacokinetic concentration profiles. As concentration profile dynamics can influence drug effects on the target tissues, it is important to be able to reproduce realistic concentration profiles in in vitro systems. We present a novel design that can be integrated in tubing-free, microfluidic culture chips. These chips are actuated by tilting so that gravity-driven flow and perfusion of culture chambers can be established between reservoirs at both ends of a microfluidic channel. The design enables the realization of in vivo-like substance exposure scenarios. Compound gradients are generated through an asymmetric Y-junction of channels with different hydrodynamic resistances. Six microtissues (MTs) can be cultured and exposed in compartments along the channel. Changes of the chip design or operation parameters enable to alter the dosing profile over a large range. Modulation of, e.g., the tilting angle, changes the slope of the dosing curves, so that concentration curves can be attained that resemble the pharmacokinetic characteristics of common substances in a human body. Human colorectal cancer (HCT 116) MTs were exposed to both, gradually decreasing and constant concentrations of Staurosporine. Measurements of apoptosis induction and viability after 5 h and 24 h showed different short- and long-term responses of the MTs to dynamic and linear dosing regimes

A novel microfluidic device capable of maintaining functional thyroid carcinoma specimens ex vivo provides a new drug screening platform

BackgroundThough the management of malignancies has improved vastly in recent years, many treatment options lack the desired efficacy and fail to adequately augment patient morbidity and mortality. It is increasingly clear that patient response to therapy is unique to each individual, necessitating personalised, or ‘precision’ medical care. This demand extends to thyroid cancer; ~ 10% patients fail to respond to radioiodine treatment due to loss of phenotypic differentiation, exposing the patient to unnecessary ionising radiation, as well as delaying treatment with alternative therapies.MethodsHuman thyroid tissue (n = 23, malignant and benign) was live-sliced (5 mm diameter × 350-500 μm thickness) then analysed or incorporated into a microfluidic culture device for 96 h (37 °C). Successful maintenance of tissue was verified by histological (H&E), flow cytometric propidium iodide or trypan blue uptake, immunohistochemical (Ki67 detection/ BrdU incorporation) and functional analysis (thyroxine [T4] output) in addition to analysis of culture effluent for the cell death markers lactate dehydrogenase (LDH) and dead-cell protease (DCP). Apoptosis was investigated by Terminal deoxynucleotidyl transferase dUTP nick end labelling (TUNEL). Differentiation was assessed by evaluation of thyroid transcription factor (TTF1) and sodium iodide symporter (NIS) expression (western blotting).ResultsMaintenance of gross tissue architecture was observed. Analysis of dissociated primary thyroid cells using flow cytometry both prior to and post culture demonstrated no significant change in the proportion of viable cells. LDH and DCP release from on-chip thyroid tissue indicated that after an initial raised level of release, signifying cellular damage, detectable levels dropped markedly. A significant increase in apoptosis (p < 0.01) was observed after tissue was perfused with etoposide and JNK inhibitor, but not in control tissue incubated for the same time period. No significant difference in Ki-67 positivity or TTF1/NIS expression was detected between fresh and post-culture thyroid tissue samples, moreover BrdU positive nuclei indicated on-chip cellular proliferation. Cultured thyroid explants were functionally viable as determined by production of T4 throughout the culture period.ConclusionsThe described microfluidic platform can maintain the viability of thyroid tissue slices ex vivo for a minimum of four days, providing a platform for the assessment of thyroid tissue radioiodine sensitivity/adjuvant therapies in real time.

Species-specific enhancement of enterohemorrhagic E. coli pathogenesis mediated by microbiome metabolites

BackgroundSpecies-specific differences in tolerance to infection are exemplified by the high susceptibility of humans to enterohemorrhagic Escherichia coli (EHEC) infection, whereas mice are relatively resistant to this pathogen. This intrinsic species-specific difference in EHEC infection limits the translation of murine research to human. Furthermore, studying the mechanisms underlying this differential susceptibility is a difficult problem due to complex in vivo interactions between the host, pathogen, and disparate commensal microbial communities.ResultsWe utilize organ-on-a-chip (Organ Chip) microfluidic culture technology to model damage of the human colonic epithelium induced by EHEC infection, and show that epithelial injury is greater when exposed to metabolites derived from the human gut microbiome compared to mouse. Using a multi-omics approach, we discovered four human microbiome metabolites—4-methyl benzoic acid, 3,4-dimethylbenzoic acid, hexanoic acid, and heptanoic acid—that are sufficient to mediate this effect. The active human microbiome metabolites preferentially induce expression of flagellin, a bacterial protein associated with motility of EHEC and increased epithelial injury. Thus, the decreased tolerance to infection observed in humans versus other species may be due in part to the presence of compounds produced by the human intestinal microbiome that actively promote bacterial pathogenicity.ConclusionOrgan-on-chip technology allowed the identification of specific human microbiome metabolites modulating EHEC pathogenesis. These identified metabolites are sufficient to increase susceptibility to EHEC in our human Colon Chip model and they contribute to species-specific tolerance. This work suggests that higher concentrations of these metabolites could be the reason for higher susceptibility to EHEC infection in certain human populations, such as children. Furthermore, this research lays the foundation for therapeutic-modulation of microbe products in order to prevent and treat human bacterial infection.

Morphometric and computational assessments to evaluate neuron survival and maturation within compartmentalized microfluidic devices: The influence of design variation on diffusion-driven nutrient transport

Burgeoning use of segregated microfluidic platforms that parse somas and neurites into discrete compartments is fueling unique examinations of neuronal structure and physiology in a manner impossible to achieve with non-compartmentalized systems. However, even though this line of axon-soma polarizing microfluidic devices stems from the same general design of a Campenot chamber set-up, slight deviations in device geometry appear to induce vastly different nutrient transport profiles that influence neuron survival and maturation. Here we examine the uptake of nerve growth factor (NGF) by a pheochromocytoma PC12 cell line cultured using two Campenot-like device designs, a “Standard” layout, representative of a commercial device, and a custom “Notch” layout, predicted to encourage more efficient nutrient transfer that gives rise to sustained neuron viability and extensive neurite elaboration. Exploiting in vitro culture schemes coupled with computational analyses, we identify the influence of device design geometry on the interplay between neuronal survival and maturation, gauged from morphometric assessments and the spatiotemporal distribution of NGF. Computer simulations of NGF transport within the devices revealed that the microfluidic neuron culture system is highly sensitive to change, where nutrient transport is intricately linked to device geometry and cell plating density, and premature depletion of nutrients is observed if specific design criteria are not met. This study underscores the importance of validating specific device geometries for a particular neuro-based assessment, while showcasing computational modeling as a powerful tool to achieve this goal.

"Liver-on-a-Chip" Cultures of Primary Hepatocytes and Kupffer Cells for Hepatitis B Virus Infection.

Despite the exceptional infectivity of the hepatitis B virus (HBV) in vivo, where only three viral genomes can result in a chronicity of experimentally infected chimpanzees, most in vitro models require several hundreds to thousands of viral genomes per cell in order to initiate a transient infection. Additionally, static 2D cultures of primary human hepatocytes (PHH) allow only short-term studies due to their rapid dedifferentiation. Here, we describe 3D liver-on-a-chip cultures of PHH, either in monocultures or in cocultures with other nonparenchymal liver-resident cells. These offer a significant improvement to studying long-term HBV infections with physiological host cell responses. In addition to facilitating drug efficacy studies, toxicological analysis, and investigations into pathogenesis, these microfluidic culture systems enable the evaluation of curative therapies for HBV infection aimed at eliminating covalently closed, circular (ccc)DNA. This presented method describes the set-up of PHH monocultures and PHH/Kupffer cell co-cultures, their infection with purified HBV, and the analysis of host responses. This method is particularly applicable to the evaluation of long-term effects of HBV infection, treatment combinations, and pathogenesis.

Microbial single-cell growth response at defined carbon limiting conditions.

Growth is one of the most fundamental characteristics of life, but detailed knowledge regarding growth at nutrient limiting conditions remains scarce. In recent years progress in microfluidic single-cell analysis and cultivation techniques has given insights into many fundamental growth characteristics such as growth homeostasis, aging and cell division of microbial cells. Using microfluidic single-cell cultivation technologies we examined how single-cell growth at defined carbon conditions, ranging from strongly limiting conditions (0.01 mmol L−1) to a carbon surplus (100 mmol L−1), influenced cell-to-cell variability. The experiments showed robust growth of populations at intermediate concentrations and cell-to-cell variability was higher at low and high carbon concentrations, among an isogenic population. Single-cell growth at extremely limiting conditions led not only to significant variability of division times, but also to an increased number of cells that did not pursue growth. Overall, the results demonstrate that cellular behaviour shows robust, Monod-like growth, with significant cell-to-cell heterogeneity at extreme limiting conditions, resembling natural habitats. Due to this significant influence of the environment on cellular physiology, more carefulness needs to be given future microfluidic single-cell experiments. Consequently, our results lay the foundation for the re-interpretation and design of workflows for future experiments aiming at an improved understanding of cell growth mechanisms.

Fabrication of composite microfluidic devices for local control of oxygen tension in cell cultures.

Oxygen tension is a central component of the cellular microenvironment and can serve as a trigger for changes in cell phenotype and function. There is a strong need to precisely control and modulate oxygen tension in cell culture systems in order to more accurately model the physiology and pathophysiology observed in vivo. The objective of this paper was to develop a simple, yet effective strategy for local control of oxygen tension in microfluidic cell cultures. Our strategy relied on fabrication of microfluidic devices using oxygen-permeable and impermeable materials. This composite device was designed so as to incorporate regions of gas permeability into the roof of the cell culture chamber and was outfitted with a reservoir for the oxygen-consuming chemical pyrogallol. When assembled and filled with pyrogallol, this device allowed oxygen depletion to occur within a specific region of the microfluidic culture chamber. The geometry and dimensions of the hypoxic region inside a microfluidic chamber were controlled by features fabricated into the oxygen-impermeable layer. Oxygen tension as low as 0.5% could be achieved using this strategy. To prove the utility of this device, we demonstrated that hypoxia induced anaerobic metabolism in a group of liver cancer cells, and that neighboring cancer cells residing under normoxic conditions upregulated the expression of transporters for taking up lactate - a product of anaerobic respiration. The microfluidic devices described here may be broadly applicable for mimicking multiple physiological scenarios where oxygen tension varies on the length scale of tens of micrometers including the cancer microenvironment, liver zonation, and luminal microenvironment of the gut.

Primary Embryonic Rat Cortical Neuronal Culture and Chronic Rotenone Treatment in Microfluidic Culture Devices.

In the study of neurodegenerative diseases, it is imperative to study the cellular and molecular changes associated with pathogenesis in the relevant cell type, central nervous system neurons. The unique compartmentalized morphology and bioenergetic needs of primary neurons present complications for their study in culture. Recent microculture techniques utilizing microfluidic culture devices allows for environmental separation and analysis of neuronal cell bodies and neurites in culture. Here, we present our protocol for culture of primary neurons in microfluidic devices and their chronic treatment with the Parkinson's disease (PD) relevant toxicant rotenone. In addition, we present a method for reuse of devices for culture. This culture methodology presents advantages for evaluating early pathogenic cellular and molecular changes in neurons in a compartment-specific manner.

Tumor spheroid-on-a-chip: a standardized microfluidic culture platform for investigating tumor angiogenesis.

The field of microfluidics-based three-dimensional (3D) cell culture system is rapidly progressing from academic proof-of-concept studies to valid solutions to real-world problems. Polydimethylsiloxane (PDMS)-based platform has been widely adopted as in vitro platforms for mimicking tumor microenvironment. However, PDMS has not been welcomed as a standardized commercial application for preclinical screening due to inherent material limitations that make it difficult to scale-up production. Here, we present an injection-molded plastic array 3D spheroid culture platform (Sphero-IMPACT). The platform is made of polystyrene (PS) in a standardized 96-well plate format with a user-friendly interface. This interface describes a simpler design that incorporates a tapered hole in the center of the rail to pattern a large spheroid with 3D extracellular matrix and various cell types. This hole is designed to accommodate standard pipette tip for automated system. The platform that mediate open microfluidics allows implement spontaneous fluid patterning with high repeatability from the end user. To demonstrate versatile use of the platform, we developed 3D perfusable blood vessel network and tumor spheroid assays. In addition, we established a tumor spheroid induced angiogenesis model that can be applicable for drug screening. Sphero-IMPACT has the potential to provide a robust and reproducible in vitro assay related to vascularized cancer research. This easy-to-use, ready-to-use platform can be translated into an enhanced preclinical model that faithfully reflects the complex tumor microenvironment.

A Microfluidic Spheroid Culture Device with a Concentration Gradient Generator for High-Throughput Screening of Drug Efficacy.

Three-dimensional (3D) cell culture is considered more clinically relevant in mimicking the structural and physiological conditions of tumors in vivo compared to two-dimensional cell cultures. In recent years, high-throughput screening (HTS) in 3D cell arrays has been extensively used for drug discovery because of its usability and applicability. Herein, we developed a microfluidic spheroid culture device (μFSCD) with a concentration gradient generator (CGG) that enabled cells to form spheroids and grow in the presence of cancer drug gradients. The device is composed of concave microwells with several serpentine micro-channels which generate a concentration gradient. Once the colon cancer cells (HCT116) formed a single spheroid (approximately 120 μm in diameter) in each microwell, spheroids were perfused in the presence of the cancer drug gradient irinotecan for three days. The number of spheroids, roundness, and cell viability, were inversely proportional to the drug concentration. These results suggest that the μFSCD with a CGG has the potential to become an HTS platform for screening the efficacy of cancer drugs.

Challenges and Future Prospects on 3D in-vitro Modeling of the Neuromuscular Circuit.

Movement of skeletal-muscle fibers is generated by the coordinated action of several cells taking part within the locomotion circuit (motoneurons, sensory-neurons, Schwann cells, astrocytes, microglia, and muscle-cells). Failures in any part of this circuit could impede or hinder coordinated muscle movement and cause a neuromuscular disease (NMD) or determine its severity. Studying fragments of the circuit cannot provide a comprehensive and complete view of the pathological process. We trace the historic developments of studies focused on in-vitro modeling of the spinal-locomotion circuit and how bioengineered innovative technologies show advantages for an accurate mimicking of physiological conditions of spinal-locomotion circuit. New developments on compartmentalized microfluidic culture systems (cμFCS), the use of human induced pluripotent stem cells (hiPSCs) and 3D cell-cultures are analyzed. We finally address limitations of current study models and three main challenges on neuromuscular studies: (i) mimic the whole spinal-locomotion circuit including all cell-types involved and the evaluation of independent and interdependent roles of each one; (ii) mimic the neurodegenerative response of mature neurons in-vitro as it occurs in-vivo; and (iii) develop, tune, implement, and combine cμFCS, hiPSC, and 3D-culture technologies to ultimately create patient-specific complete, translational, and reliable NMD in-vitro model. Overcoming these challenges would significantly facilitate understanding the events taking place in NMDs and accelerate the process of finding new therapies.

Germination and Growth Analysis of Streptomyces lividans at the Single-Cell Level Under Varying Medium Compositions.

Quantitative single-cell cultivation has provided fundamental contributions to our understanding of heterogeneity among industrially used microorganisms. Filamentous growing Streptomyces species are emerging platform organisms for industrial production processes, but their exploitation is still limited due to often reported high batch-to-batch variations and unexpected growth and production differences. Population heterogeneity is suspected to be one responsible factor, which is so far not systematically investigated at the single-cell level. Novel microfluidic single-cell cultivation devices offer promising solutions to investigate these phenomena. In this study, we investigated the germination and growth behavior of Streptomyces lividans TK24 under varying medium compositions on different complexity levels (i.e., mycelial growth, hyphal growth and tip elongation) on single-cell level. Our analysis reveals a remarkable stability within growth and germination of spores and early mycelium development when exposed to constant and defined environments. We show that spores undergo long metabolic adaptation processes of up to > 30 h to adjust to new medium conditions, rather than using a “persister” strategy as a possibility to cope with rapidly changing environments. Due to this uniform behavior, we conclude that S. lividans can be cultivated quite robustly under constant environmental conditions as provided by microfluidic cultivation approaches. Failure and non-reproducible cultivations are thus most likely to be found in less controllable larger-scale cultivation workflows and as a result of environmental gradients within large-scale cultivations.

Long-Term Retinal Differentiation of Human Induced Pluripotent Stem Cells in a Continuously Perfused Microfluidic Culture Device.

Understanding how microenvironmental cues influence cellular behavior will enable development of efficient and robust pluripotent stem cell differentiation protocols. Unlike traditional cell culture dishes, microfluidic bioreactors can provide stable microenvironmental conditions by continuous medium perfusion at a controlled rate. The aim of this study is to investigate whether a microfluidic culture device could be used as a perfused platform for long-term cell culture processes such as the retinal differentiation of human induced pluripotent stem cells. The perfusion flow rate is established based on the degradation and consumption of growth factors (DKK-1, Noggin, IGF-1, and bFGF) and utilizing the Péclet number. The device's performance analyzed by qRT-PCR show improvements compared to the well-plate control as characterized by significantly higher expression of the markers Pax6, Chx10, and Crx on Day 5, Nrl on day 10, Crx, and Rhodopsin on day 21. Optimization of perfusion rate is an important operating variable in development of robust processes for differentiation cultures. Result demonstrates convective delivery of nutrients via perfusion has a significant impact upon the expression of key retinal markers. This study is the first continuously perfused long-term (21 days) retinal differentiation of hiPSCs in a microfluidic device.

PDMS-Based Microfluidic Devices for Cell Culture

Microfluidic technology has affirmed itself as a powerful tool in medical and biological research by offering the possibility of managing biological samples in tiny channels and chambers. Among the different applications, the use of microfluidics for cell cultures has attracted much interest from scientists worldwide. Traditional cell culture methods need high quantities of samples and reagents that are strongly reduced in miniaturized systems. In addition, the microenvironment is better controlled by scaling down. In this paper, we provide an overview of the aspects related to the design of a novel microfluidic culture chamber, the fabrication approach based on polydimethylsiloxane (PDMS) soft-lithography, and the most critical issues in shrinking the size of the system.

Different action of nanoencapsulated meso-tetraphenylporphyrin in breast spheroid co-culture and mono-culture under microfluidic conditions

In cancer research, it is important to develop culture models which will reproduce natural environment of tumor, e.g. three-dimensional (3D) cell arrangement, cell-cell interactions, the presence of various cell types. To meet the demands, it is proposed a new microfluidic culture model based on spheroids composed of a co-culture of cancer and non-malignant mammary cells. This culture model is utilized for evaluation of photodynamic therapy (PDT) effectiveness with a nanoencapsulated photosensitizer (meso-tetraphenylporphyrin, nano-TPP). Thanks to such a model the mechanisms of breast cell response in spheroid co-culture and mono-culture could be investigated under microfluidic conditions. It is observed that the breast spheroid co-culture exhibits resistance to PDT procedures more than the spheroid mono-cultures. This effect could result from a different accumulation of nano-TPP and different ROS generation in both spheroid models: mono- and co-cultures. Summarizing, in this paper an innovative approach for the development of a 3D in vitro breast tumor model and its usage for the evaluation of PDT procedure effectiveness is presented.

Controlled Shear Flow Directs Osteogenesis on UHMWPE-Based Hybrid Nanobiocomposites in a Custom-Designed PMMA Microfluidic Device.

The combinatorial influence of a biophysical cue (substrate stiffness) and biomechanical cue (shear flow) on the osteogenesis modulation of human mesenchymal stem cells (hMSCs) is studied for bone regenerative applications. In this work, we report stem cell differentiation on an ultra high molecular weight polyethylene (UHMWPE)-based hybrid nanobiocomposite [reinforced with a multiwalled carbon nanotube (MWCNT) and/or nanohydroxyapatite (nHA)] under a physiologically relevant shear flow (1 Pa) in a custom-built microfluidic device. Using a genotypic assessment with qRT-PCR and phenotypic assessment through analysis of cytoskeletal remodelling and marker proteins, the role of shear on the progression of osteogenesis modulation has been quantitatively established with statistically significant differences between nHA-reinforced and MWCNT-reinforced UHMWPE. Early-stage (alkaline phosphatase activity at day 8), middle-stage (matrix collagenation at day 14), and late-stage (matrix calcification at day 20) events were analyzed using mRNA expression changes of a limited cell volume after microfluidic culture experiments. The conventional Petri dish culture (static) exhibited an increased osteogenesis for nanoparticle-reinforced UHMWPE, irrespective of the type of nanoparticle. The shear-mediated culture experiments resulted in noticeable differences in the degree of osteogenesis with MWCNT being more effective than nHA reinforcement. The shear-mediated osteogenesis has been attributed to the skewed cellular morphology with a higher cell adhesion (vinculin expression) on UHMWPE and nHA than that of UHMWPE and MWCNT. The signatures of the cytoskeletal changes are reflected in terms of left-to-right (L-R) chirality as well as alignment and pattern of actin fibers. Moreover, stemness (vimentin expression) was found to be decreased because of differentiation. The electrophysiological analysis using patch clamp experiments also revealed a higher inward calcium current and intracellular calcium activity for the cells grown on the UHMWPE and nHA nanobiocomposite under shear. Overall, the present study conclusively establishes the synergistic role of substrate stiffness and shear on osteogenesis of hMSCs, in vitro.

Kidney-on-a-Chip: A New Technology for Predicting Drug Efficacy, Interactions, and Drug-induced Nephrotoxicity.

Kidney dysfunction resulting from various drugs is an important issue during the drug development process. Traditional in vivo animal experiments are limited with respect to evaluating drug efficacy and nephrotoxicity due to discrepancies in drug pharmacokinetics and pharmacodynamics between humans and animals, and static cell culture experiments cannot fully reflect the actual microphysiological environment in humans. In this review article, authors collected manually relevant bibliographic databases including journal articles and textbooks related to microfluidics, kidney-on-a-chip, and drug screening and interaction. In this review, we discuss recent developments in microfluidic culturing technique and describe current and future kidney-on-a-chip applications. The pharmacodynamic and pathophysiological responses of cells are more realistic in microfluidic or 3D culture systems than in conventional 2D culture systems. Recently, several types of kidney-on-a-chip have been developed that reflect the microenvironment of the kidney tubule and have been shown to better reflect actual in-vivo results of drug nephrotoxicity. Using kidney-on-a-chip, investigators can measure various drug-induced biological responses. In the future, it is expected that a multi-organ chip will be utilized to examine the interaction between kidney and other organs, and kidney-on-a-chip can be used in disease modeling and the development of new renal replacement therapy. Using kidney-on-a-chip, researchers can create experimental environments resembling the physiological environments in human organs and obtain experimental results that better reflect human physiology. Kidney-ona- chip can be used to overcome the drawbacks of traditional animal models and to more effectively identify drug effects, interactions, and drug-induced nephrotoxicity.

Abstract 2051: Perfusable 3D angiogenesis in a high-throughput microfluidic culture platform

Abstract The transition from 2D to 3D cell culture is a first step towards more physiologically relevant in vitro cancer models. To adequately capture the complex tissue architectures observed in vivo, 3D microfluidic techniques incorporate and achieve long-term gradient stability, continuous perfusion and patterning of cancer cell layers as stratified co-cultures. We used a standardized high-throughput (n=40) microfluidic 3D tissue culture platform called the OrganoPlate® to generate precisely controlled gradients, without pumps, ideal for growing blood vessels and inducing controlled 3D angiogenic sprouting. The blood vessel is grown against an extracellular matrix (ECM) gel with cancer cells and is subsequently exposed to pro- and antiangiogenic compounds to direct sprouting towards 3D cancer cell clusters. Utilizing high-content confocal time-lapse imaging and analysis, angiogenic potential was measured in various cancer models. The exposed vasculature shows many of the important hallmarks of cancer angiogenesis found in vivo, including tip cells induction and migration and stalk cells formation. Importantly, the stalk cells develop a perfusable lumen that is connected to the parental vessel as demonstrated with perfusion of high-molecular-weight (150KD) fitc-dextran through microvascular structures. This model will be used as an in vitro cancer screening platform to unravel the important drivers in angiogenesis and vasculogenesis and the mechanism of action of antiangiogenic compounds. By combining this culture platform with mural cells, cell-cell interactions can be studied. In parallel, we will combine this 3D cancer angiogenesis platform with our current Tumor-on-a-Chip models to create tissue models with integrated vasculature. Citation Format: K M. Bircsak, V van Duinen, S J. Trietsch, A J. van Zonneveld, T Hankemeier, A Saleh, P Vulto. Perfusable 3D angiogenesis in a high-throughput microfluidic culture platform [abstract]. In: Proceedings of the American Association for Cancer Research Annual Meeting 2018; 2018 Apr 14-18; Chicago, IL. Philadelphia (PA): AACR; Cancer Res 2018;78(13 Suppl):Abstract nr 2051.