Microfluidic Cartridge Research Articles

Detection of lipid bilayer and peptide pore formation at gigahertz frequencies

A coplanar waveguide defined on a borosilicate glass chip is integrated with a microfluidic cartridge to allow for characterization of lipid bilayer membranes at gigahertz frequencies. The membranes are deposited on the waveguide using a vesicle fusion method. The deposition of the bilayers results in a significant change in the high-frequency transmission properties of the waveguide. We also embed alamethicin, an ion channel forming peptide, in the bilayers. The influence of the pore forming peptides can be clearly detected in the transmission signal.

Micro Parallel Liquid Chromatography for High-Throughput Compound Purity Analysis and Early ADMET Profiling

The Nanostream (Pasadena, CA) Veloce system, together with 24-column Brio cartridges, offers a novel approach to micro parallel liquid chromatography (μPLC). This system allows users to achieve unprecedented throughput for standard assays while matching the performance of conventional LC instrumentation, thus enabling routine compound purity assessment and physiochemical property profiling early in the drug discovery and development process. The Veloce system—which includes instrumentation, software, and replaceable microfluidic cartridges—incorporates pressure-driven flow to achieve chromatograms comparable to conventional high performance liquid chromatography (HPLC) instrumentation for a broad class of analytical applications while offering a dramatic increase in sample analysis capacity. The system enables parallel chromatographic separations and simultaneous, real-time UV detection. Each Nanostream Brio cartridge, made of polymeric materials, incorporates 24 columns packed with standard (C-18) stationary phase material to achieve reverse phase separations. Mixing and distribution of the mobile phase to each of the 24 columns is precisely controlled in each cartridge. The system provides an ideal platform to accelerate assessment of compound purity and physicochemical properties (i.e., log P, CHI, etc.) for a large number of compounds. In addition, the 24-fold increase in sample analysis capacity allows standard curve generation and simultaneous analysis of multiple replicates of samples in a single run. (JALA 2004;9:185-91)

Lab-on-a-chip sample preparation using laminar fluid diffusion interfaces--computational fluid dynamics model results and fluidic verification experiments.

Microfluidic structures for the generation of laminar fluid diffusion interfaces (LFDIs) for sample preparation and analysis are discussed. Experimental data and the results of fluid modeling are shown. LFDIs are generated when two or more streams flow in parallel in a single microfluidic structure without any mixing of the fluids other than by diffusion of particles across the diffusion interface. It has been shown that such structures can be used for diffusion-based separation and detection applications. The method has been applied to DNA desalting, the extraction of small proteins from whole blood samples, and the detection of various constituents in whole blood, among other examples. In this paper the design and manufacture of self-contained microfluidic cartridges for the extraction of small molecules from a mixture of small and large molecules by diffusion is demonstrated. The cards are operated without any external instrumentation, and use hydrostatic pressure as the driving force. The performance of the cartridges is illustrated by separating fluorescein from a mixture of fluorescein and dextran of molecular weight 2 x 10(6). In a single pass, 98.6% of dextran was retained in the product whereas 43.1% of fluorescein was removed. The method is adjustable for different separation requirements, and computational fluid dynamics (CFD) models are shown that demonstrate the tuning of various microfluidic parameters to optimize separation performance. Other applications of LFDIs for establishment of stable concentration gradients, and the exposure of chemical constituents or biological particles to these concentration gradients are shown qualitatively. Microfluidic chips have been designed for high-throughput screening applications that enable the uniform and controlled exposure of cells to lysing agents, thus enabling the differentiation of cells by their sensitivity to specific agents in an on-chip cytometer coupled directly to the lysing structure.

Adaptation of a surface plasmon resonance biosensor with microfluidics for use with small sample volumes and long contact times.

The efficient delivery of sample to surface-immobilized sites is a key element in biosensing. For a surface plasmon resonance (SPR) biosensor, this has been addressed by constant flow through a microfluidic system with a sample injection loop (Sjölander, S.; Urbaniczky, C. Anal. Chem. 1991, 63, 2338-2345). The present study describes an alternative mode of sample delivery without constant unidirectional flow. It was implemented on a commercial Biacore X SPR biosensor equipped with a microfluidic cartridge, but with the fluidic handling performed by an externally computer-controlled syringe pump. We demonstrate that sample volumes as low as 2 microL can be reproducibly positioned to cover the sensor surfaces, manipulated in a serial fashion, efficiently mixed by applying an oscillatory flow pattern, and fully recovered. Compared to the traditional continuous unidirectional flow configuration, we found very similar kinetic responses at high analyte concentrations and slightly slower responses at low concentrations, most likely due to depletion of analyte from the small sample volumes due to surface binding. With the antibody-antigen systems tested, binding parameters were obtained that are generally within 10% of those from conventional experiments. In the new configuration, biosensor experiments can be conducted without the usual constraints in the surface contact time that are correlated with sample volume and mass transport rate. This can translate to improved detection limits for slow reactions and can facilitate kinetic and thermodynamic binding studies.

A microfluidic cartridge to prepare spores for PCR analysis

A prototype cartridge system is described that rapidly disrupts Bacillus spores by sonication, adds PCR reagent to the disrupted spores, and dispenses the mixture into a PCR tube. The total time to automatically process the spores in the cartridge and then detect the spore DNA by real-time PCR was 20 min.

Mapping of the antibody- and receptor-binding domains of granulocyte colony-stimulating factor using and optical biosensor Comparison with enzyme-linked immunosorbent assay competition studies

An automated biosensor instrument for measuring molecular interactions (Pharmacia BIAcore) has been used to characterise the epitopes recognised by 15 monoclonal antibodies raised against recombinant human granulocyte colony-stimulating factor (G-CSF). The BIAcore combines an autosampler and integrated microfluidic cartridge for the introduction and transportation of samples to the sensor chip surface, with surface plasmon resonance to detect binding events. A rabbit anti-mouse Fc antibody, coupled to the sensor surface in situ using conventional protein chemistry techniques, was used to capture an anti-G-CSF monoclonal antibody. G-CSF was bound to this antibody by injection over the sensor surface. Multi-site binding experiments were then performed in which other anti-G-CSF monoclonal antibodies were injected sequentially over the surface, and their ability to bind to the G-CSF in a multimolecular complex monitored in real time. Results obtained using the biosensor have been compared with data obtained by cross competition studies using biotinylated antibodies or antibody binding studies using chemically or enzymatically derived G-CSF peptide fragments or synthetic peptides. The results of these studies are in excellent agreement with the data from the BIAcore, although modification of the antibody or G-CSF occasionally altered the epitope affinity.

Immobilization of proteins to a carboxymethyldextran-modified gold surface for biospecific interaction analysis in surface plasmon resonance sensors

A method for fast and simple covalent immobilization of proteins to a carboxymethyldextran-modified gold surface intended for surface plasmon resonance sensors is described. The method utilizes the formation of N-hydroxysuccinimide esters from a fraction of the carboxyl groups of the carboxymethyldextran matrix via reaction with N-hydroxysuccinimide and N-ethyl- N′-(dimethylaminopropyl) carbodiimide hydrochloride in water. In a second step the protein is passed over the surface in a solution of low ionic strength with a pH value below the isoelectric point of the protein. The protein is thereby concentrated in the matrix by electrostatic attraction forces and a simultaneous reaction with the active esters takes place. In a final step, the remaining active esters are transformed into amides via reaction with ethanolamine. This sequence is performed automatically in a system comprising an integrated microfluidic cartridge and an autosampler. Typical reaction times of less than 30 min are required for the immobilization of proteins at surface concentrations in the region of 70 fmol mm −2. Parameters such as protein concentration, protein solution ionic strength, pH, reaction times, and reagent concentration can be varied in order to control the immobilized amount of ligand. The biospecific interaction of the immobilized ligand with its biological counterpart is illustrated by the effects on the interaction of immunoglobulins with immobilized Staphylococcus aureus protein A for various amounts of protein A.