Microencapsulation Of Essential Oil Research Articles

Microencapsulation to Harness the Antimicrobial Potential of Essential Oils and Their Applicability in Dairy Products: A Comprehensive Review of the Literature.

This literature review explores cutting-edge microencapsulation techniques designed to enhance the antimicrobial efficacy of essential oils in dairy products. As consumer demand for natural preservatives rises, understanding the latest advancements in microencapsulation becomes crucial for improving the shelf life and safety of these products. The bibliometric analysis utilized in this review highlighted a large number of documents published on this topic in relation to the following keywords: essential oils, AND antimicrobials, AND dairy products, OR microencapsulation. The documents published in the last 11 years, between 2013 and 2023, showed a diversity of authors and countries researching this topic and the keywords commonly used. However, in the literature consulted, no study was identified that was based on bibliometric analysis and that critically evaluated the microencapsulation of essential oils and their antimicrobial potential in dairy products. This review synthesizes findings from diverse studies, shedding light on the various encapsulation methods employed and their impact on preserving the quality of dairy goods. Additionally, it discusses the potential applications and challenges associated with implementation in the dairy industry. This comprehensive analysis aims to provide valuable insights for researchers, food scientists, and industry professionals seeking to optimize the use of essential oils with antimicrobial properties in dairy formulations.

Microencapsulation of Essential Oils Using Faba Bean Protein and Chia Seed Polysaccharides via Complex Coacervation Method.

The aim of this study was to develop microcapsules containing juniper or black pepper essential oils, using a combination of faba bean protein and chia seed polysaccharides (in ratios of 1:1, 1:2, 2:1). By synergizing these two polymers, our goal was to enhance the efficiency of essential oil microencapsulation, opening up various applications in the food industry. Additionally, we aimed to investigate the influence of different polymer mixing ratios on the properties of the resulting microcapsules and the course of the complex coacervation process. To dissolve the essential oils and limit their evaporation, soybean and rapeseed oils were used. The powders resulting from the freeze-drying of coacervates underwent testing to assess microencapsulation efficiency (65.64-87.85%), density, flowability, water content, solubility, and hygroscopicity. Additionally, FT-IR and DSC analyses were conducted. FT-IR analysis confirmed the interactions between the components of the microcapsules, and these interactions were reflected in their high thermal resistance, especially at a protein-to-polysaccharide ratio of 2:1 (177.2 °C). The water content in the obtained powders was low (3.72-7.65%), but it contributed to their hygroscopicity (40.40-76.98%).

Enhancing basil essential oil microencapsulation using pectin/casein biopolymers: Optimization through D-optimal design, controlled release modeling, and characterization

A D-optimal design was employed to optimize the microencapsulation (MEC) of basil essential oil (BEO) within a biopolymer matrix using the complex coacervation technique. BEO microcapsules (BEO-MCs) obtained under the optimal conditions exhibited high yield and efficiency with 80.45 ± 0.01 % and 93.10 ± 0.18 %, respectively. The successful MEC of BEO with an average particle size of 4.81 ± 2.86 μm was confirmed by ATR-FTIR, X-RD, and SEM analyses. Furthermore, the thermal stability of BEO-MCs was assessed using TGA-DSC analysis, which provided valuable insights into the MC's thermal stability. Furthermore, the proposed model, with a high R2 value (0.99) and low RMSE (1.56 %), was the most suitable one among the tested models for the controlled release kinetics of the optimal BEO-MCs under simulated gastrointestinal conditions. The successful optimization of BEO MEC using biopolymers through the D-optimal design could be a promising avenue for food and pharmaceutical industries, providing new strategies for the development of effective products.

Recent progress in the microencapsulation of essential oils for sustainable functional textiles

Recent progress in the microencapsulation of essential oils for sustainable functional textiles

Microencapsulation of Juniper and Black Pepper Essential Oil Using the Coacervation Method and Its Properties after Freeze-Drying.

Essential oils are mixtures of chemical compounds that are very susceptible to the effects of the external environment. Hence, more attention has been drawn to their preservation methods. The aim of the study was to test the possibility of using the classical model of complex coacervation for the microencapsulation of essential oils. Black pepper (Piper nigrum) and juniper (Juniperus communis) essential oils were dissolved in grape seed (GSO) and soybean (SBO) oil to minimize their loss during the process, and formed the core material. Various mixing ratios of polymers (gelatin (G), gum Arabic (GA)) were tested: 1:1; 1:2, and 2:1. The oil content was 10%, and the essential oil content was 1%. The prepared coacervates were lyophilized and then screened to obtain a powder. The following analyses were determined: encapsulation efficiency (EE), Carr index (CI), Hausner ratio (HR), solubility, hygroscopicity, moisture content, and particle size. The highest encapsulation efficiency achieved was within the range of 64.09-59.89%. The mixing ratio G/GA = 2:1 allowed us to obtain powders that were characterized by the lowest solubility (6.55-11.20%). The smallest particle sizes, which did not exceed 6 μm, characterized the powders obtained by mixing G/GA = 1:1. All powder samples were characterized by high cohesiveness and thus poor or very poor flow (CI = 30.58-50.27, HR = 1.45-2.01).

Exploration of optimal preparation strategy of Chenpi (pericarps of Citrus reticulata Blanco) flavouring essence with great application potential in sugar and salt-reduced foods

To obtain flavouring essence with application potential in sugar and salt-reduced foods, the optimal strategy for extraction and microencapsulation of essential oil (EO) from Chenpi was investigated. UPLC-QTOF-MS/MS and liquid–liquid-extraction-GC–MS confirmed the selectivity for volatiles ranked in hydrodistillation > supercritical fluid extraction > solvent extraction. The aroma characteristic of Chenpi EO was distinguished by 33 key volatiles (screened out via headspace-SPME-GC–MS) and quantitative descriptive analysis. EO extracted by supercritical fluid extraction was preferred for preserving the original aroma of Chenpi and displaying more fruity, honey and floral. Chenpi flavouring essence with superior encapsulation efficiency, particle size, water dispersibility, and thermostability was obtained through optimally microencapsulating EO with gum arabic and maltodextrin (1:1) by high-pressure homogenization coupled with spray drying. Chenpi flavouring essence was able to reduce the usage of sugar and salt by 20 % via enhancing flavour perception of sweetness and saltiness. This study first developed a flavouring essence promisingly effective in both sugar and salt-reduced foods.

Microencapsulation of essential oils by single and coaxial electrospraying in poly ε-caprolactone microcapsules: characterization and oil release behavior

Electrospraying is a versatile, high-efficiency method for synthesizing microcapsules (MCs) with many applications. In this study, a single and a coaxial nozzle were used to prepare poly (ε-caprolactone) (PCL) MCs. The aim of this work was to investigate the influence of the encapsulation technique (single electrospraying (SE) and coaxial electrospraying (CE)) on morphology, particle size, chemical interactions, thermal properties, encapsulation efficiency, and release behavior. Thus, two natural oils with an insect-repellence effect (citronella and eucalyptus) were encapsulated in PCL MCs by means of SE and by CE. Spectroscopy, thermal, and microscopy characterizations of the MCs were performed. Oil encapsulation efficiency (EE) and release studies were also made. Spherical MCs with a mean diameter of 7–10 µm were obtained. Characterization techniques showed the presence of citronella and eucalyptus in the MCs and the chemical interactions between the polymer and the oils. In addition, higher encapsulation efficiency was achieved by CE for both oils. For MCs obtained by SE, a higher mass of oil released was observed compared to the capsules obtained by CE. Two released mechanisms were obtained in the systems depending on the oil used. The possibility of using MCs with different characteristics allows greater versatility of the particles.

Plant Proteins and Polysaccharides in Microencapsulation of Essential Oils for Development of Functional Food Sector

Plant Proteins and Polysaccharides in Microencapsulation of Essential Oils for Development of Functional Food Sector

Application of yellow mustard mucilage in encapsulation of essential oils and polyphenols using spray drying

The current study has investigated the application of water-soluble yellow mustard mucilage (WSM) as a novel wall material in microencapsulation of essential oils (EO), thymol and carvacrol, and polyphenols (PP). Thymol (25%, w/w), carvacrol (25%, w/w) and PP (50%, w/w) were encapsulated in WSM, maltodextrin (MD) and gum Arabic (GA) at various mass ratios (e.g. 1:2:6, 2:2:5, 0:3:6) and core to wall ratios (e.g. 4:9 and 1:5, w/w) by spray drying. Results confirmed that the addition of WSM into the wall formula improved the emulsion stability, encapsulation efficiency, and assisted in modulating the release pattern of the bioactive compounds. Overall, the formula with the WSM/MD/GA ratio of 2/2/5 (w/w/w) and the core to wall ratio of 1:5 showed the best releasing performance. The emulsion has maximum stability with zeta potential of −41.5 ± 1.7 mV and highest viscosity 0.032 ± 0.04 mPa s at the shear rate 100 s−1. The Fourier-transform infrared spectrometer indicates that bioactive compounds have been entrapped physically without adverse reaction with wall materials. The scanning electron microscopy results show that microparticles are spherical with less dents and have an average particle size of 3.11 μm. The highest encapsulation efficiency of 91% and prolonged releasing time were achieved, where 72.7% of EOs and PP were delivered to the lower section of the intestinal tract. The release kinetic of EOs and PP fitted well to the Rigter Peppas model (R2 = 0.991), of which erosion is the dominant mechanism. WSM could be utilized as a superior wall material to exert synergistic effects on the encapsulation of bioactive ingredients for related food, feed, and pharmaceutical industries.

Recent Advances in the Microencapsulation of Essential Oils, Lipids, and Compound Lipids through Spray Drying: A Review.

In recent decades, the microcapsules of lipids, compound lipids, and essential oils, have found numerous potential practical applications in food, textiles, agricultural products, as well as pharmaceuticals. This article discusses the encapsulation of fat-soluble vitamins, essential oils, polyunsaturated fatty acids, and structured lipids. Consequently, the compiled information establishes the criteria to better select encapsulating agents as well as combinations of encapsulating agents best suited to the types of active ingredient to be encapsulated. This review shows a trend towards applications in food and pharmacology as well as the increase in research related to microencapsulation by the spray drying of vitamins A and E, as well as fish oil, thanks to its contribution of omega 3 and omega 6. There is also an increase in articles in which spray drying is combined with other encapsulation techniques, or modifications to the conventional spray drying system.

Microencapsulation of agarwood (Aquilaria crassna) essential oil by spray drying

Agarwood essential oil is the essential oil extracted from the heartwood of agarwood trees (Aquilaria sp.) after inoculation or natural infection of one of several fungal species. The essential oil is proved to carry antioxidant, antimicrobial and anti-stress activities. Microencapsulation of essential oil included emulsification of oil into maltodextrin solution and spray drying of emulsion at different levels of inlet temperature and compressed air pressure. Microencapsulation process was qualified based on following parameters including process’s microencapsulation yield, moisture content of powder, powder particle size, encapsulated oil’s composition, oil recovery and drying yield. Microencapsulation yield was affected by inlet temperature whereas drying yield changed as air pressure varied from 1.5 to 2.5 kgf/cm2. Other parameters were impacted by both variables. Besides, oil composition changed at an acceptable degree after microencapsulation process, in which there were an increase in percentage and the presence of some components but the main components still remained in the encapsulated oil. Finally, the drying air temperature of 150 °C and air pressure of 2.5 kgf/cm2 were the best parameters to obtain both microencapsulation yield of 89.12% and drying yield of 79.00%.

Maltodextrin-Coated Peppermint and Caraway Essential Oils Effects on Soil Microbiota.

Essential oils exhibit strong antimicrobial effects that can serve as a substitute for synthetic pesticides. However, many reports mention the use of essential oils in protecting above-ground plant organs and storing raw materials and seeds, but only a few address the effects of treatments on soil microbiota. Regarding this, it is necessary to find a solution that will prevent the rapid degradation of oils in soil and extend the period of their action on the soil microbiota. The solution to this problem can be microencapsulation, where the choice of carrier plays a key role. In our experiment, maltodextrin was studied, often used in the microencapsulation of essential oils. It was examined independently in two doses (M1 and M2, with 50 and 200 g kg-1, respectively) and a combination with two essential oils known for their antimicrobial activity. We hypothesized that the selected microbial communities would react differently to the stress caused by maltodextrin-encapsulated essential oils. The serial dilution method assessed the number of colony-forming units (CFU) of bacteria, fungi, and actinomycetes. As the goal of microencapsulation was to prolong the effect of essential oils, their reaction was observed over a longer period. The soil microbial populations were examined in sandy and loamy soil at 1, 7, 14, and 78 days after encapsulated essential oils were mixed with the soil samples. In both types of soil, a significant increase in bacteria and actinomycetes was observed with maltodextrin in both doses. Encapsulated peppermint and caraway oils had different effects on microbes, both inhibitory and stimulatory. It is also important to note that peppermint with a smaller dose of maltodextrin significantly inhibited the growth of fungi in sandy soil in all measurements, as well as that caraway oil with a higher dose of maltodextrin significantly stimulated the growth of bacteria and actinomycetes in sandy soil. The higher dose of maltodextrin could explain this stimulation. Further research is recommended to test different doses of essential oils and maltodextrin, which would lead to the optimal dose of both wall and core materials.

Quinoa protein isolate-gum Arabic coacervates cross-linked with sodium tripolyphosphate: Characterization, environmental stability, and Sichuan pepper essential oil microencapsulation

Quinoa protein isolate-gum Arabic coacervates (QPI-GA coacervates) was cross-linked with sodium tripolyphosphate (STPP) to enhance their physicochemical properties. The optimum concentration of STPP for cross-linking was determined experimentally to be 0.2 g/g of QPI-GA mixture. After cross-linking, QPI-GA coacervates changed to the more ordered structure, and showed higher pH, ionic, and thermal stability. The STPP cross-linked coacervates were used as wall materials for Sichuan pepper essential oil (SPEO) encapsulation with encapsulation efficiency of 87.25 %. Compared with uncross-linked microcapsules, cross-linked microcapsules showed higher SPEO retention at high temperature, different pH, and high ionic concentration. Meanwhile, STPP cross-linked microcapsules improved the stability of SPEO during oral and gastric digestion as indicated by the lower SPEO release, which guaranteed the higher release and absorption in intestinal digestion of SPEO. Consequently, STPP cross-linked QPI-GA coacervates can be an ideal carrier for flavors or active ingredients, protecting them against harsh environment conditions during food processing and digestion.

Coacervation as a Novel Method of Microencapsulation of Essential Oils-A Review.

These days, consumers are increasingly “nutritionally aware”. The trend of “clean label” is gaining momentum. Synthetic additives and preservatives, as well as natural ones, bearing the E symbol are more often perceived negatively. For this reason, substances of natural origin are sought tfor replacing them. Essential oils can be such substances. However, the wider use of essential oils in the food industry is severely limited. This is because these substances are highly sensitive to light, oxygen, and temperature. This creates problems with their processing and storage. In addition, they have a strong smell and taste, which makes them unacceptable when added to the product. The solution to this situation seems to be microencapsulation through complex coacervation. To reduce the loss of essential oils and the undesirable chemical changes that may occur during their spray drying—the most commonly used method—complex coacervation seems to be an interesting alternative. This article collects information on the limitations of the use of essential oils in food and proposes a solution through complex coacervation with plant proteins and chia mucilage.

Essential oil microencapsulation with biodegradable polymer for food packaging application

Essential oil microencapsulation with biodegradable polymer for food packaging application

Biological potential and microencapsulation of Cinnamomum cassia essential oil as an alternative for pest control in stored maize

This study proposes a review of biological potential of cinnamon (Cinnamomum cassia) essential oil with a focus on microencapsulation as an alternative to control the occurrence of pests in stored maize grains. Due to the demands on corn productivity, there is the need to improve grain storage processes and conditions, since that in this stage there are quantitative and/or qualitative losses, mainly due to the maize weevils (Sitophilus zeamais) and the incidence of mycotoxin-producing fungi (Penicillium crustosum, Alternaria alternata and Aspergillus flavus). The control of these pests is usually carried out with chemical insecticides, which can leave toxic residues in the grain. Therefore, the microencapsulation of essential oils appears as a promising alternative, considering the volatility of aromatic compounds, which are largely responsible for the activity against pests.

Effect of the Amount of Polysorbate 80 and Oregano Essential Oil on the Emulsion Stability and Characterization Properties of Sodium Alginate Microcapsules.

Essential oils have a high volatility that leads to evaporation and loss of their pharmacological effect when exposed to the environment. The objectives of the present work were to prepare microcapsules with oregano essential oil by extrusion using sodium alginate as a shell material and non-ionic surfactant polysorbate 80 as an emulsifier to stabilize the emulsion. The present study was aimed to evaluate the physical parameters of microcapsules and to compare the influence of the amount of emulsifier and the essential oil-to-emulsifier ratio on the capsules’ physical parameters and encapsulation efficiency; to our knowledge, the existing research had not yet revealed whether unstable emulsion affects the encapsulation efficiency of oregano essential oil. This study showed that increasing the emulsifier amount in the formulation significantly influenced encapsulation efficiency and particle size. Moreover, increasing the emulsion stability positively influenced the encapsulation efficiency. The emulsion creaming index depended on the emulsifier amount in the formulation: the highest creaming index (%) was obtained with the highest amount of polysorbate 80. However, the essential oil-to-polysorbate 80 ratio and essential oil amount did not affect the hardness of the microcapsules (p > 0.05). In conclusion, the obtained results could be promising information for production of microcapsules. Despite the fact that microencapsulation of essential oils is a promising and extremely attractive application area for the pharmaceutical industry, further basic research needs to be carried out.

Microencapsulation of Essential Oils by Spray-Drying and Influencing Factors

Essential oils (EOs) are known as any aromatic oily organic substances which are naturally synthesized in plants. Exhibiting a broad range of biological activities, EOs have played a key role in numerous industries for ages, including pharmaceutical, textile, and food. However, the volatility and high sensitivity to environmental influences pose challenges to the application of EOs on industrial scale. Microencapsulation via the spray-drying method is one of the promising techniques to overcome these challenges, thanks to the presence of wall materials that properly protect the core EOs from oxidation and evaporation. By optimization of key factors related to the infeed emulsion properties and spray-drying process, the encapsulation efficiency and retention of encapsulated EOs could be significantly improved, thus allowing a wide range of EO applications. This review attempts to discuss on different determining factors of the spray-drying process to develop an effective encapsulation formula for EOs. Furthermore, recent applications of encapsulated EOs in the fields of foods, pharmaceuticals, and textile industries are also thoroughly addressed.

Lemongrass (Cymbopogon citratus DC. Stapf) essential oil microparticles: Development, characterization, and antioxidant potential

Maltodextrin (DE 20) and gelatin (4:1, w/w, respectively) were investigated as encapsulant materials for lemongrass (Cymbopogon citratus DC. Stapf) essential oil microencapsulation by freeze-drying. Three formulations were prepared: M1 (5% essential oil), M2 (10% essential oil), and M3 (15% essential oil), all in w/w. Microparticles were characterized by Fourier-transform infrared spectroscopy, scanning electron microscopy, water activity measurement, thermogravimetric and derivative thermogravimetric analysis, differential scanning calorimetry, and antioxidant activity analysis. Yield and microencapsulation efficiency were also determined. The results showed the promising potential of maltodextrin and gelatin as encapsulants and confirmed the feasibility of preparing C. citratus essential oil microparticles by freeze-drying. Microencapsulation improved the oil’s thermal and oxidative stability, providing protection from volatilization and environmental conditions. Scanning electron microscopic examination of M1 revealed a closed, pore-free surface. M1 had higher yield and microencapsulation efficiency, showing great commercial potential for its reduced storage, transport, and distribution costs.

Cassava starch-based essential oil microparticles preparations: Functionalities in mosquito control and selectivity against non-target organisms

Due to the production facilities and great functionalities, the starch extracted from Cassava plants' (Manihot esculenta Crantz) roots is one of the most abundant and inexpensive raw materials used in food- and non-food industries. The utilization of starches to encapsulate plant essential oils is a relevant advance in the control of insect pests, including mosquitoes that transmit human diseases. The starch-based microencapsulation of essential oils reduces the degradation and volatilization of active components, providing more sustainable and environmentally friendly activities. Here, we investigated the potential of cassava-based starch microparticle preparations containing the essential oil of a Neotropical plant (Siparuna guianensis Aublet) to control larvae of Aedes aegypti and Culex quinquefasciatus. Moreover, the selectivity of the most efficient microparticles preparation was evaluated on zebrafish embryos (Danio rerio), an aquatic non-target organism. The characterization of encapsulated microparticles was achieved by using scanning electron microscopy (SEM), infrared spectroscopy with Fourier transform (FTIR), and thermogravimetric analysis (TGA). Our results revealed an encapsulation efficiency of 82.8 % to 95.3 %, with an average particle diameter of 8.56 μm. Cassava starch microencapsulation reduced the essential oil degradation and enhanced (up to 8 days) the persistent lethal activities (over 50 %) against both species' mosquito larvae compared to the pure essential oil. Furthermore, the exposure of aquatic non-target organisms (embryos of D. rerio) revealed these microparticles' adequate selectivity. Collectively, our findings demonstrate that cassava starch-based microparticles exhibit promising functionality as carriers for essential oils with mosquitocidal activities.