Microalgal Strains Research Articles

Characterization of hypersaline Oklahoma native microalgae cultivated in flowback and produced water: growth profile and contaminant removal.

This work explores the potential of three hypersaline native microalgae strains from Oklahoma, Geitlerinema carotinosum, Pseudanabaena sp., and Picochlorum oklahomensis, for simultaneous treatment of flowback (FW) and produced wastewater (PW) and the production of algal biomass. The quality of wastewater before and after treatment with these microalgae strains was evaluated and a characterization of algal biomass in terms of moisture, volatile matter, fixed carbon, and ash contents was assessed. The experimental results indicated how all the microalgae strains were able to grow in both FW and PW, revealing their potential for wastewater treatment. Although algal biomass production was limited by nutrient availability both in PW and FW, a maximum biomass concentration higher than 1.35g L-1 were achieved by the three strains in two of the PWs and one of the FWs tested, with Pseudanabaena sp. reaching nearly 2g L-1. Interestingly, higher specific growth rates were obtained by the two cyanobacteria strains G. carotinosum and Pseudanabaena sp. when cultivated in both PW and FW, compared to P. oklahomensis. The harvested algal biomass contained a significant amount of energy, even though it was significantly reduced by the very high salt content. The energy content fell within the recommended range of 16-17MJ kg-1 for biomass as feedstock for biofuels. The algal treatment resulted in the complete removal of ammonia from the wastewater and a significant reduction in contaminants, such as nitrate, phosphate, boron, and micronutrients like zinc, manganese, and iron.

Screening of efficient microalgae strains isolated from Tunisian ecosystems: Assessment of algal growth rate and added-value bioproducts for biorefinery applications

Microalgae are highly diverse organisms with significant applications in the production of high-value molecules and biodiesel from microalgae rich in oils. In this study, our main objectives were to evaluate the potential applications of four isolated microalgae strains, namely Scenedesmus sp., Nannochloris sp., Oscillatoria sp., and Amphora sp., which were selected from the natural environment. These strains were batch cultured, and their growth was monitored. We determined the content of chlorophyll a, carotenoids, and lipids, and analyzed the fatty acid profile of each cultivated strain to assess their lipid potential for biodiesel production. Our findings revealed that these strains exhibited high biomass production, ranging from 3000 mg. L−1 for Amphora sp. to 3800 mg. L−1 for Oscillatoria sp. Notably, Oscillatoria sp. and Scenedesmus sp. were found to be the richest in saturated fatty acids, with 10.68% and 9.36% of dry cell weight, respectively, suggesting their potential use in the production of biodiesel from microalgal oils with possibility of blending with other oils feedstock to improve biodiesel final quality. Furthermore, our results showed that the Nannochloris sp. strain could be cultivated to extract pigments for various applications, as it exhibited high levels of chlorophyll a (38.43 mg. L−1) and carotenoids (4.153 μg. mL−1).

Effect of organic carbon sources on growth, lipid production and fatty acid profile in mixotrophic culture of Scenedesmus dimorphus (Turpin) Kützing

Due to non-renewability of fossil fuels and various environmental problems associated with their use, there is a growing interest in producing biodiesel from microalgae. Finding novel microalgal strains with desired characteristics such as rapid growth rates, high lipid productivity, and suitable fatty acid compositions is important for the production of biodiesel. Comparatively, photoautotrophic cultivation of microalgae results in low biomass yields and lipid productivities. Mixotrophic and heterotrophic cultures, in contrast, lead to higher biomass and lipid productivities but their productivities are species specific and depend a lot on the organic carbon source and culture conditions. In the present study, the potential of Scenedesmus dimorphus for biodiesel oil production under mixotrophic culture was investigated. The effects of organic carbon sources (glucose, ethanol and glycerol) on growth, biomass yields, lipid contents, lipid productivities and fatty acids compositions of Scenedesmus dimorphus in mixotrophic cultures were investigated. In comparison to photoautotrophic cultures, mixotrophic cultures produced significantly higher biomass concentration, lipid content, and lipid productivities (P≤0.05) under all the cultivation conditions investigated. The maximum biomass and lipid productivities achieved by mixotrophic culture were 83.88±0.05 and 17.11±0.04 mg L−1 day−1 respectively which are more than 2.6 and 3.1 folds higher than those obtained under photoautotrophic condition. Using glucose as the organic carbon source was better than ethanol and glycerol in terms of biomass and lipid productivities (glucose > ethanol > glycerol). The majority of the produced fatty acids were composed of C16 and C18 fatty acids. The two most abundant fatty acids in all the cultures were linolenic and palmitic acids. The values of biodiesel properties of oil obtained from S. dimorphus are within the American (ASTM D6751) and European (EN 14214) biodiesel specifications. The results show that S. dimorphus has good potentials for biodiesel oil production and that the productivity can be enhanced by mixotrophic cultivation.

Concentration-dependent effects of spinetoram on nontarget freshwater microalgae: A comparative study on Chlorella vulgaris and Microcystis aeruginosa

The rising global demand for agricultural products is leading to the widespread application of pesticides, such as spinetoram, resulting in environmental pollution and ecotoxicity to nontarget organisms in aquatic ecosystems. This research focused on assessing the toxicity of spinetoram at various concentrations (0, 0.01, 0.1, 0.5, 1.0, and 3.0 mg L−1) on two common freshwater microalgae, Chlorella vulgaris and Microcystis aeruginosa, to shed light on the ecotoxicological effects of insecticides. Our findings demonstrate that M. aeruginosa is more sensitive to spinetoram than is C. vulgaris, with a concentration-dependent reduction in the growth rate observed for M. aeruginosa, whereas only the highest concentration of spinetoram adversely affected C. vulgaris. At a concentration of 0.01 mg L−1, the growth rate of M. aeruginosa unexpectedly increased beginning on day 7, indicating a potential hormetic effect. Although initial exposure to spinetoram improved the photosynthetic efficiency of both microalgae strains at all concentrations, detrimental effects became apparent at higher concentrations and with prolonged exposure. The photosynthetic efficiency of C. vulgaris recovered, in contrast to that of M. aeruginosa, which exhibited limited recovery. Spinetoram more significantly inhibited the effective quantum yield of PSII (EQY) in M. aeruginosa than in C. vulgaris. Although spinetoram is not designed to target phytoplankton, its toxicity can disrupt primary productivity and modify phytoplankton-consumer interactions via bottom-up control mechanisms. This study enhances our understanding of spinetoram's ecotoxicity and potential effects on aquatic ecosystems.

Phycoremediation Potential of Salt-Tolerant Microalgal Species: Motion, Metabolic Characteristics, and Their Application for Saline-Alkali Soil Improvement in Eco-Farms.

Microalgae have great potential for remediating salt-affected soil. In this study, the microalgae species Coelastrella sp. SDEC-28, Dunaliella salina SDEC-36, and Spirulina subsalsa FACHB-351 were investigated for their potential to rehabilitate salt-affected soils. Nylon screens with optimal aperture sizes and layer numbers were identified to efficiently intercept and harvest biomass, suggesting a correlation between underflow capability and the tough cell walls, strong motility, and intertwining characteristics of the algae. Our investigations proved the feasibility of incorporating monosodium glutamate residue (MSGR) into soil extracts at dilution ratios of 1/200, 1/2000, and 1/500 to serve as the optimal medium for the three microalgae species, respectively. After one growth period of these three species, the electrical conductivities of the media decreased by 0.21, 1.18, and 1.78 mS/cm, respectively, and the pH remained stable at 7.7, 8.6, and 8.4. The hypotheses that microalgae can remediate soil and return profits have been verified through theoretical calculations, demonstrating the potential of employing specific microalgal strains to enhance soil conditions in eco-farms, thereby broadening the range of crops that can be cultivated, including those that are intolerant to saline-alkali environments.

Strategies to enhance biohydrogen production from microalgae: A comprehensive review

Microalgae represent a promising renewable feedstock for the sustainable production of biohydrogen. Their high growth rates and ability to fix carbon utilizing just sunlight, water, and nutrients make them well-suited for this application. Recent advancements have focused on improving microalgal hydrogen yields and cultivation methods. This review aims to summarize recent developments in microalgal cultivation techniques and genetic engineering strategies for enhanced biohydrogen production. Specific areas of focus include novel microalgal species selection, immobilization methods, integrated hybrid systems, and metabolic engineering. Studies related to microalgal strain selection, cultivation methods, metabolic engineering, and genetic manipulations were compiled and analyzed. Promising microalgal species with high hydrogen production capabilities such as Synechocystis sp., Anabaena variabilis, and Chlamydomonas reinhardtii have been identified. Immobilization techniques like encapsulation in alginate and integration with dark fermentation have led to improved hydrogen yields. Metabolic engineering through modulation of hydrogenase activity and photosynthetic pathways shows potential for enhanced biohydrogen productivity. Considerable progress has been made in developing microalgal systems for biohydrogen. However, challenges around process optimization and scale-up remain. Future work involving metabolic modeling, photobioreactor design, and genetic engineering of electron transfer pathways could help realize the full potential of this renewable technology.

Effect of physicochemical parameters on the growth of two microalgae strains, the Chlorella vulgaris and Skeletonema costatum isolated from different sites in the nador lagoon

Microalgae have become a major focus of scientific research in recent years, due to their use in food human and animal, pharmaceuticals and renewable energy production.The main objective of our study was to identify the phytoplankton of the Nador lagoon and to study the effect of physico-chemical parameters such as nitrogen, phosphorus and pH on the growth of two strains isolated from different sites in the Nador lagoon: Chlorella vulgaris and Skeletonema costatum, in order to optimize culture medium compositions and achieve good phytoplankton growth.Morphological studies using inverted optical microscopy revealed the important morphological distinguishing features of the two phytoplankton species studied, originated from the six different sampling stations.The results of the optimization protocols for medium composition and culture conditions (the effect of nitrogen, phosphorus, pH and vitamins) allow us to conclude that the two strains tested are growing well.In fact, the results of the physico-chemical parameters in our study show pH values of 7.5, 7 and 6.5 and nitrate and orthophosphate concentrations during the bloom period of 1.5 g/l and 0.31 g/l respectively. And for the quantitative study, we can conclude that Chlorella vulgaris was dominant with a density of 2840 cells/l, and that Skeletonema costatum was dominant with a density of 2160 cells/l.The study provides crucial insights into the growth patterns of these microalgae under different physico-chemical conditions, contributing to the optimization of culture practices for potential applications in various industries.

Comparative dynamic optimization study of batch hydrothermal liquefaction of two microalgal strains for economic bio-oil production

This work presents dynamic optimization strategies of batch hydrothermal liquefaction of two microalgal species, Aurantiochytrium sp. KRS101 and Nannochloropsis sp. to optimize the reactor temperature profiles. Three dynamic optimization problems are solved to maximize the endpoint biocrude yield, minimize the final time, and minimize the reactor thermal energy. The biocrude maximization and time minimization problems demonstrated 11% and 6.18% increment in the optimal biocrude yields and reduction of 78.2% and 61.66% in batch times compared to the base cases for the microalgae with higher lipid and protein fractions, respectively. The energy minimization problem revealed a significant reduction in the reactor thermal energies to generate the targeted biocrude yields compared to the biocrude maximization. Therefore, the identified optimal temperature trajectories outperformed the conventional fixed temperature profiles and could improve the overall economics of the batch bio-oil production from the algal-based biorefineries by significantly enhancing the reactor performance.

Assessment of Phytoremediation Efficiency and Valuable Biomass-Yielding of Different Microalgal Strains Grown on Aquaculture Wastewater

Assessment of Phytoremediation Efficiency and Valuable Biomass-Yielding of Different Microalgal Strains Grown on Aquaculture Wastewater

Flocculation-enhanced photobiological hydrogen production by microalgae: Flocculant composition, hydrogenase activity and response mechanism

The practical application of microalgal photobiological hydrogen was limited by its low yield and short production time. In this study, the promotion of inorganic flocculants (polymeric aluminum chloride, PAC) and organic flocculants (cationic polyacrylamide, CPAM) to the aggregate formation and photobiological hydrogen production of prokaryotic microalgae (Synechocystis sp.) and eukaryotic microalgae (Chlamydomonas reinhardtii) were investigated. The effectiveness of PAC-CPAM composite flocculants in promoting aggregation was compared to single PAC or CPAM, with flocculation efficiencies exceeding 92.2 % for both microalgal strains. After aggregate formation, hydrogen production in Synechocystis and C. reinhardtii increased by 65.9 % and 80.2 %, respectively, compared with the control (without flocculation). Their hydrogenase activity rose to 1.14 and 28.2 μmol H2/(mg chlorophyll·h), respectively. Aggregation sustained the photosynthetic activity of both Synechocystis and C. reinhardtii, with the photosynthetic system electron transfer rate (ETR) 1.54–1.72 times higher than that of the control. The formation of aggregates enhanced microalgal respiration, accelerating the reduction of oxygen content, and increasing hydrogenase activity. Notably, the increased respiration in Synechocystis and C. reinhardtii aggregates supplied more electrons, enhancing hydrogen production by consuming intracellular organic matter. Aggregate formation upregulated the expression of Synechocystis and C. reinhardtii hydrogenase genes by average 2.1-fold and 2.5-fold, respectively. Simultaneously, the expression of genes related to photosynthetic system Ⅱ, ferredoxin, pyruvate ferredoxin-oxidoreductase, and oxidative phosphorylation were upregulated, with a significant effect observed in C. reinhardtii aggregates. The results of this study advanced the utilization and industrialization of microalgae-based green hydrogen production, contributing to carbon neutrality.

Biogas Upgrading by Wild Alkaliphilic Microalgae and the Application Potential of Their Biomass in the Carbon Capture and Utilization Technology

Although biogas is a renewable energy source alternative to natural gas, it contains approximately 40 vol% CO2 and, hence, a low calorific value. The sequestration of CO2 from biogas is, therefore, essential before its widespread use. As CO2 can be easily solubilized as carbonate and bicarbonate in alkaline water, in this study, we isolated and characterized alkaliphilic wild microalgae that grow under high-level CO2 conditions and evaluated their application potential in CO2-removal from biogas. For this purpose, freshwater samples were enriched with 10 vol% CO2 and an alkaline culture medium (pH 9.0), wherein almost free CO2 was converted to carbonate and bicarbonate to yield alkaliphilic and high-level CO2-tolerant microalgae. Ten microalgal strains of Micractinium, Chlorella, Scenedesmus/Tetradesmus, or Desmodesmus spp. were isolated, some of which demonstrated good growth even under conditions of >pH 10 and >30 vol% CO2. All algal strains grew well through fixing biogas-derived CO2 in a vial-scale biogas upgrading experiment, which reduced the CO2 level in biogas to an undetectable level. These strains yielded antioxidant carotenoids, including lutein, astaxanthin, zeaxanthin, and β-carotene, particularly rich in lutein (up to 7.3 mg/g dry cells). In addition, these strains contained essential amino acids, accounting for 42.9 mol% of the total amino acids on average, and they were rich in unsaturated fatty acids (comprising 62.2 wt% of total fatty acids). The present study identified strains that can contribute to biogas upgrading technology, and the present findings suggest that their biomass can serve as useful raw material across the food, nutraceutical, and feed industries.

Microalgae bio-reactive façade: Location and weather-based systematic optimization

This article explores the design of microalgae biofaçade thanks to a numerical model describing the system’s thermal and biological behavior. Design options (single vs. double glazing, radiation-selective film, culture reservoir thickness) and operation strategies (light transmission, microalgae strain, sparged air origin, boiler fumes reuse) are screened systematically. The context for this investigation was the city of Marseille over a 10-year period (2013 to 2022) for which detailed meteorological data were available (air temperature, wind velocity and orientation, cloud cover, at a 3-hour resolution). These investigations revealed a very high level of interaction between the parameters (assessed by H2 Friedman index), making the system notoriously complicated to design and optimize. Nevertheless, some conclusions can be drawn. In France, fitting double glazing equipped with a greenhouse radiation-selective film is essential to harness as much heat as possible (＋16.7 % and ＋6.5 % of operation duration over year 2018, respectively). Similarly, a thermophilic strain is not relevant because overheating events are inexistent in well-designed systems. Further refinements, such as the origin of the air blown into the culture reservoir and the reuse of combustion fumes from the boiler (＋2.1 % performance), were evaluated from a technical point of view. However, their implementation would also be subjected to other considerations, such as the financial costs and environmental benefits. Finally, the model was applied to design the most efficient possible microalgae biofaçade system in the case of a hypothetical official building renovation.

Methylmercury Effect and Distribution in Two Extremophile Microalgae Strains Dunaliella salina and Coccomyxa onubensis from Andalusia (Spain).

The main entrance point of highly toxic organic Hg forms, including methylmercury (MeHg), into the aquatic food web is phytoplankton, which is greatly represented by various natural microalgal species. Processes associated with MeHg fate in microalgae cells such as uptake, effects on cells and toxicity, Hg biotransformation, and intracellular stability are detrimental to the process of further biomagnification and, as a consequence, have great importance for human health. The study of MeHg uptake and distribution in cultures of marine halophile Dunaliella salina and freshwater acidophilic alga Coccomyxa onubensis demonstrated that most of the MeHg is imported inside the cell, while cell surface adhesion is insignificant. Almost all MeHg is removed from the culture medium after 72 h. Significant processes in rapid MeHg removal from liquid medium are its abiotic photodegradation and volatilization associated with algal enzymatic activity. The maximum intracellular accumulation for both species was in 80 nM MeHg-exposed cultures after 24 h of exposure for D. salina (from 27 to 34 µg/gDW) and at 48 h for C. onubensis (up to 138 µg/gDW). The different Hg intakes in these two strains could be explained by the lack of a rigid cell wall in D. salina and the higher chemical ability of MeHg to pass through complex cell wall structures in C. onubensis. Electron microscopy studies on the ultrastructure of both strains demonstrated obvious microvacuolization in the form of many very small vacuoles and partial cell membrane disruption in 80 nM MeHg-exposed cultures. Results further showed that Coccomyxa onubensis is a good candidate for MeHg-contaminated water reclamation due to its great robustness at nanomolar concentrations of MeHg coupled with its very high intake and almost complete Hg removal from liquid medium at the MeHg levels tested.

The cadmium tolerance and bioaccumulation mechanism of Tetratostichococcus sp. P1: insight from transcriptomics analysis

ABSTRACT Cadmium (Cd) has become a severe issue in relatively low concentration and attracts expert attention due to its toxicity, accumulation, and biomagnification in living organisms. Cd does not have a biological role and causes serious health issues. Therefore, Cd pollutants should be reduced and removed from the environment. Microalgae have great potential for Cd absorption for waste treatment since they are more environmentally friendly than existing treatment methods and have strong metal sorption selectivity. This study evaluated the tolerance and ability of the microalga Tetratostichococcus sp. P1 to remove Cd ions under acidic conditions and reveal mechanisms based on transcriptomics analysis. The results showed that Tetratostichococcus sp. P1 had a high Cd tolerance that survived under the presence of Cd up to 100 µM, and IC50, the half-maximal inhibitory concentration value, was 57.0 μM, calculated from the change in growth rate based on the chlorophyll content. Long-term Cd exposure affected the algal morphology and photosynthetic pigments of the alga. Tetratostichococcus sp. P1 removed Cd with a maximum uptake of 1.55 mg g−1 dry weight. Transcriptomic analysis revealed the upregulation of the expression of genes related to metal binding, such as metallothionein. Group A, Group B transporters and glutathione, were also found upregulated. While the downregulation of the genes were related to photosynthesis, mitochondria electron transport, ABC-2 transporter, polysaccharide metabolic process, and cell division. This research is the first study on heavy metal bioremediation using Tetratostichococcus sp. P1 and provides a new potential microalga strain for heavy metal removal in wastewater. Abbreviations:BP: Biological process; bZIP: Basic Leucine Zipper; CC: Cellular component; ccc1: Ca (II)-sensitive cross complementary 1; Cd: Cadmium; CDF: Cation diffusion facilitator; Chl: Chlorophyll; CTR: Cu TRansporter families; DAGs: Directed acyclic graphs; DEGs: Differentially expressed genes; DVR: Divinyl chlorophyllide, an 8-vinyl-reductase; FPN: FerroportinN; FTIR: Fourier transform infrared; FTR: Fe TRansporter; GO: Gene Ontology; IC50: Growth half maximal inhibitory concentration; ICP: Inductively coupled plasma; MF: molecular function; NRAMPs: Natural resistance-associated aacrophage proteins; OD: Optical density; RPKM: Reads Per Kilobase of Exon Per Million Reads Mapped; VIT1: Vacuolar iron transporter 1 families; ZIPs: Zrt-, Irt-like proteins.

Efficient Production of Microalgal Biomass—Step by Step to Industrial Scale

The production of microalgal biomass on a commercial scale remains a significant challenge. Despite the positive results obtained in the laboratory, there are difficulties in obtaining similar results in industrial photobioreactors. Changing the cultivation conditions can affect not only the growth of microalgae but also their metabolism. This is of particular importance for the use of biomass for bioenergy production, including biofuel production. The aim of this study was to determine the biomass production efficiency of selected microalgal strains, depending on the capacity of the photobioreactor. The lipid and ash content of the biomass were also taken into account. It was found that as the scale of production increased, the amount of biomass decreased, irrespective of the type of strain. The change in scale also affected the lipid content of the biomass. The highest values were found in 2.5 L photobioreactors (ranging from 26.3 ± 2.2% for Monoraphidium to 13.9 ± 0.3% for Chlorella vulgaris). The least favourable conditions were found with industrial photobioreactors, where the lipid content of the microalgal biomass ranged from 7.1 ± 0.6% for Oocycstis submarina to 10.2 ± 1.2% for Chlorella fusca. The increase in photobioreactor capacity had a negative effect on the ash content.

Axenic green microalgae for the treatment of textile effluent and the production of biofuel: a promising sustainable approach

An integrated approach to nutrient recycling utilizing microalgae could provide feasible solutions for both environmental control and energy production. In this study, an axenic microalgae strain, Chlorella sorokiniana ASK25 was evaluated for its potential as a biofuel feedstock and textile wastewater (TWW) treatment. The microalgae isolate was grown on TWW supplemented with different proportions of standard BG-11 medium varying from 0 to 100% (v/v). The results showed that TWW supplemented with 20% (v/v) BG11 medium demonstrated promising results in terms of Chlorella sorokiniana ASK25 biomass (3.80 g L−1), lipid production (1.24 g L−1), nutrients (N/P, > 99%) and pollutant removal (chemical oxygen demand (COD), 99.05%). The COD level dropped by 90% after 4 days of cultivation, from 2,593.33 mg L−1 to 215 mg L−1; however, after day 6, the nitrogen (-NO3−1) and total phosphorus (TP) levels were reduced by more than 95%. The biomass-, total lipid- and carbohydrate- production, after 6 days of cultivation were 3.80 g L−1, 1.24 g L−1, and 1.09 g L−1, respectively, which were 2.15-, 2.95- and 3.30-fold higher than Chlorella sorokiniana ASK25 grown in standard BG-11 medium (control). In addition, as per the theoretical mass balances, 1 tonne biomass of Chlorella sorokiniana ASK25 might yield 294.5 kg of biodiesel and 135.7 kg of bioethanol. Palmitic acid, stearic acid, and oleic acid were the dominant fatty acids found in the Chlorella sorokiniana ASK25 lipid. This study illustrates the potential use of TWW as a microalgae feedstock with reduced nutrient supplementation (20% of TWW). Thus, it can be considered a promising feedstock for economical biofuel production.Graphical abstract

Characterization of halotolerant microalga isolated from waterlogged habitats: Deciphering the biochemical profiling and unraveling the molecular identity.

The primary objective of this study was to comprehensively explore the biochemical profile of the novel halotolerant microalgae strain, biogas laboratory scenedesmus (BGLRS), previously isolated from waterlogged regions in the southwest zone of Punjab, India. To achieve this, three distinct drying methods viz. freeze-drying, oven-drying, and shade-drying were employed and biochemical composition and antioxidant analyses on the microalgal biomass were conducted. Utilizing advanced analytical techniques, including high-performance liquid chromatography (HPLC), inductively coupled plasma-atomic emission spectroscopy (ICP-AES), and gas chromatography-mass spectroscopy (GC-MS) on freeze-dried biomass, its carbohydrate profile, micronutrient composition, and presence of bioactive compounds with potential therapeutic and nutraceutical significance were sought to unravel. Among the drying methods evaluated, freeze-drying exhibited the most promising experimental results, prompting its selection for further investigation. Notably, ICP-AES unveiled elevated concentrations of essential elements such as calcium, iron, magnesium, and phosphorus in BGLRS, with negligible traces of heavy metals, underscoring its safety for human consumption. GC-MS analysis further divulged the existence of numerous biologically active compounds, indicating potential applications in medical and nutraceutical fields. Through molecular identification using sequencing of the internal transcribed spacer (ITS) region, a close taxonomic resemblance between BGLRS and Scenedesmus sp. MKB was established, solidifying its unique position within the microalgal taxonomy. The deposition of ITS sequences into the NCBI GenBank, obtaining accession number MN796425, attests to the rigor and transparency of this research. Overall, these findings strongly suggest that microalgae BGLRS possesses high-quality biochemical attributes of significant therapeutic and nutraceutical importance.

Unveiling Tetraselmis subcordiformis lipidome dynamics during large-scale cultivation in open raceway pond

A local microalgal strain of Tetraselmis subcordiformis was cultivated at large-scale using open raceway pond. The temporal influence on the growth and lipidomic profile of the strain was investigated using optic density (OD) measurement and ultra-high pressure liquid chromatography. Results showed that triglycerides represented 57% of the total lipids on day 11 (exponential phase) and stayed consistently high until stationary phase, without affecting the biomass quantity. Moreover, a high expression of monounsaturated fatty acids and polyunsaturated fatty acids such as ω-3 eicosapentaenoic acid (20:5), docosahexaenoic acid (22:6), palmitic (16:0) and palmitoleic acid (16:1) was observed by stationary phase. Carotenoid analysis also revealed the increase in lutein (65.2%) and β-carotene (71.4%) from day 6 to day 15. Our study showed that T. subcordiformis contained the highest amounts of valuable lipids, fatty acids and pigments in the stationary phase, which started on day 15 of culture.

Evaluation of selected tropical marine microalgal cultures for use in biophotovoltaic platforms

In this study, the bioelectrical power generation potential of four tropical marine microalgal strains native to Malaysia was investigated using BPV platforms. Chlorella UMACC 258 produced the highest power density (0.108 mW m−2), followed by Halamphora subtropica UMACC 370 (0.090 mW m−2), Synechococcus UMACC 371 (0.065 mW m−2) and Parachlorella UMACC 245 (0.017 mW m−2). The chlorophyll-a (chl-a) content was examined to have a linear positive relationship with the power density (p < 0.05). The photosynthetic performance of strains was studied using the pulse-amplitude modulation (PAM) fluorometer; parameters measured include the following: maximum quantum efficiency (Fv/Fm), alpha (α), maximum relative electron transport rate (rETRmax), photo-adaptive index (Ek) and non-photochemical quenching (NPQ). The Fv/Fm values of all strains, except Synechococcus UMACC 371, ranged between 0.37 and 0.50 during exponential and stationary growth phases, suggesting their general health during those periods. The low Fv/Fm value of Synechococcus UMACC 371 was possibly caused by the presence of background fluorescence from phycobilisomes or phycobiliproteins. Electrochemical studies via cyclic voltammetry (CV) suggest the presence of electrochemically active proteins on the cellular surface of strains on the carbon anode of the BPV platform, while morphological studies via field emission scanning electron microscope (FESEM) imaging verify the biocompatibility of the biofilms on the carbon anode.Key points• Maximum power output of 0.108 mW m−2 is recorded by Chlorella UMACC 258• There is a positive correlation between chl-a content and power output• Proven biocompatibility between biofilms and carbon anode sans exogenous mediators

Comparison of plant biostimulating properties of Chlorella sorokiniana biomass produced in batch and semi-continuous systems supplemented with pig manure or acetate

Microalgae-derived biostimulants provide an eco-friendly biotechnology for improving crop productivity. The strategy of circular economy includes reducing biomass production costs of new and robust microalgae strains grown in nutrient-rich wastewater and mixotrophic culture where media is enriched with organic carbon. In this study, Chlorella sorokiniana was grown in 100 l bioreactors under sub-optimal conditions in a greenhouse. A combination of batch and semi-continuous cultivation was used to investigate the growth, plant hormone and biostimulating effect of biomass grown in diluted pig manure and in nutrient medium supplemented with Na-acetate. C. sorokiniana tolerated the low light (sum of PAR 0.99 ± 0.18 mol/photons/(m2/day)) and temperature (3.7–23.7° C) conditions to maintain a positive growth rate and daily biomass productivity (up to 149 mg/l/day and 69 mg/l/day dry matter production in pig manure and Na-acetate supplemented cultures respectively). The protein and lipid content was significantly higher in the biomass generated in batch culture and dilute pig manure (1.4x higher protein and 2x higher lipid) compared to the Na-acetate enriched culture. Auxins indole-3-acetic acid (IAA) and 2-oxindole-3-acetic acid (oxIAA) and salicylic acid (SA) were present in the biomass with significantly higher auxin content in the biomass generated using pig manure (> 350 pmol/g DW IAA and > 84 pmol/g DW oxIAA) compared to cultures enriched with Na-acetate and batch cultures (< 200 pmol/g DW IAA and < 27 pmol/g DW oxIAA). No abscisic acid and jasmonates were detected. All samples had plant biostimulating activity measured in the mungbean rooting bioassay with the Na-acetate supplemented biomass eliciting higher rooting activity (equivalent to 1–2 mg/l IBA) compared to the pig manure (equivalent to 0.5–1 mg/l IBA) and batch culture (equivalent to water control) generated biomass. Thus C. sorokiniana MACC-728 is a robust new strain for biotechnology, tolerating low light and temperature conditions. The strain can adapt to alternative nutrient (pig manure) and carbon (acetate) sources with the generated biomass having a high auxin concentration and plant biostimulating activity detected with the mungbean rooting bioassay.