micro-CT Scanning Research Articles

Application of diceCT to Study the Development of the Zika Virus-Infected Mouse Brain.

Zika virus (ZIKV) impacts the developing brain. Here, a technique was applied to define, in 3D, developmental changes in the brains of ZIKV-infected mice. Postnatal day 1 mice were uninfected or ZIKV-infected, then analysed by iodine staining and micro-CT scanning (diffusible iodine contrast-enhanced micro-CT; diceCT) at 3-, 6-, and 10-days post-infection (dpi). Multiple brain regions were visualised using diceCT: the olfactory bulb, cerebrum, hippocampus, midbrain, interbrain, and cerebellum, along with the lens and retina of the eye. Brain regions were computationally segmented and quantitated, with increased brain volumes and developmental time in uninfected mice. Conversely, in ZIKV-infected mice, no quantitative differences were seen at 3 or 6 dpi when there were no clinical signs, but qualitatively, diverse visual defects were identified at 6-10 dpi. By 10 dpi, ZIKV-infected mice had significantly lower body weight and reduced volume of brain regions compared to 10 dpi-uninfected or 6 dpi ZIKV-infected mice. Nissl and immunofluorescent Iba1 staining on post-diceCT tissue were successful, but RNA extraction was not. Thus, diceCT shows utility for detecting both 3D qualitative and quantitative changes in the developing brain of ZIKV-infected mice, with the benefit, post-diceCT, of retaining the ability to apply traditional histology and immunofluorescent analysis to tissue.

Multi-Scale Characterization of Pores and Fractures in Coals with Different Coal-Body Structures from the Jincheng Mine, Qinshui Basin, Northern China

The Qinshui Basin is located in the southeast of Shanxi Province, China. It is one of the most abundant coal resources from Permo-Carboniferous North China. It is rich in coal and coalbed methane resources. However, the accumulation of coalbed methane is complex and the enrichment law has not been fully understood because of the high heterogeneity of coal reservoirs in the Qinshui Basin. The examination of dissimilarities between tectonically deformed coals (TDCs) and primary coals at multiple scales holds paramount importance in advancing our understanding of the occurrence and flow patterns of coalbed methane, and in providing guidance for exploration efforts. In the present study, the samples from the Jincheng Mine, Qinshui Basin, were studied by X-ray diffraction (XRD), scanning electron microscopy (SEM), mercury intrusion porosimetry (MIP), CO2 gas adsorption and 3D X-ray micro-computed tomography. The results showed that the dominant minerals in coal were illite, kaolinite, and calcite, with minor amounts of quartz and ankerite. In comparison to primary coal, tectonism could increase the microfractures density of type A (the fracture of width ≥ 5 μm and length > 10 mm) in TDCs. In CO2 gas adsorption in mylonite coal, it was observed that the volume of micropores (<2 nm) was significantly reduced leading to a decrease in gas adsorption capacity. The result of Micro-CT scanning revealed that the minerals occurred as veins in primary coal, but as irregular aggregates in TDCs. Moreover, tectonism had a staged impact on fracture structure, which was initially closed in cataclastic coal and then formed into granulated coal during the tectonic evolution. The effects of tectonism on coal structure had an impact on the connectivity of micropores at the micrometer scale by the destruction of the pore throat structure, increasing the heterogeneity of the reservoir. These findings help to better understand the changes in TDC structure at different scales for developing effective strategies for coalbed methane exploration and production.

Improvement of 3D printing and subsequent microwave freeze-drying solidification accuracy of pineapple gel-based inks: Infill percentage control and internal models design

The purpose of this study was to improve the 3D printing accuracy of pineapple gel and its subsequent microwave freeze drying (MFD) solidification precision based on infill percentage control (30%, 50%, 70%, and 90%) and internal models design (Hilbert curve, honeycomb, and rectilinear). Through comparing the designed models with the physical dimensions of the printed and dehydrated products, the optimal regulation strategy was obtained. Results showed that the printing deviation of samples decreased initially and then increased with higher infill percentages, with the 70% infill percentage having the lowest deviation. Among all internal models, the rectilinear infill pattern showed the best printing accuracy. Porosity and the shape deformation rate of MFD solidification products initially decreased and then increased with higher infill percentages. The 70% infill percentage products had the lowest shape deformation rate. The honeycomb infill pattern performed best in reducing solidification sample shrinkage and deformation. Additionally, micro-CT scans revealed that the honeycomb infill pattern helped maintain the integrity of each layer's lines of MFD solidification products, closely matching the model's line distribution. In the 50% and 70% infill percentage, honeycomb and rectilinear samples exhibited better crispness. A 70% honeycomb infill pattern was recommended for optimal printing and post-solidification accuracy.

Multiple Non-Destructive Approaches to Analysis of the Early Silurian Chain Coral Halysites from South China.

Cnidarians are among the most important diploblastic organisms, elucidating many of the early stages of Metazoan evolution. However, Cnidarian fossils from Cambrian deposits have been rarely documented, mainly due to difficulties in identifying early Cnidarian representatives. Halysites, a tabulate coral from Silurian reef systems, serves as a crucial taxon for interpreting Cambrian cnidarians. Traditionally, the biological characteristics of Halysites have been analyzed using methods limited by pretreatment requirements (destructive testing) and the chamber size capacity of relevant analytical instruments. These constraints often lead to irreversible information loss and inadequate data extraction. This means that, to date, there has been no high-resolution three-dimensional mineralization analysis of Halysites. This study aims to introduce novel, non-destructive techniques to analyze the internal structure and chemical composition of Halysites. Furthermore, it seeks to elucidate the relationship between coral organisms and biomineralization in reef settings and to compare Silurian Tabulata with putative Cambrian cnidarians. Techniques such as micro-X-ray fluorescence spectrometry (micro-XRF), micro-X-ray computed tomography (micro-CT), and scanning electron microscopy (SEM) were employed in this research. With the help of high-resolution micro-CT scanning, we identify the growth pattern of Halysites, showing both lateral and vertical development. The lateral multiple-branching growth pattern of Halysites corals is first established herein. The flaggy corallite at the initial stage of branching is also observed. The micro-XRF mapping results reveal the occurrence of septa spines for Halysites, a trait previously thought rare or absent. Additionally, the ratio of coral volume to the surrounding rock was assessed, revealing that Halysites reefs were relatively sparse (volume ratio = ~30%). The cavities between Halysites likely provided more space for other organisms (e.g., rugose corals and bryozoans) when compared to other coral reef types. Additionally, we provide a comparative analysis of post-Cambrian colonial calcareous skeletons, offering insights into the structural features and growth patterns of early skeletal metazoans across the Ediacaran-Cambrian boundary.

Permeability prediction method of unconsolidated sandstone reservoirs using CT scanning technology and random forest model

Developing unconsolidated sandstone reservoirs presents a formidable challenge due to their loose formation, which often triggers alterations in pore parameters and seepage characteristics during water injection processes. This study focuses on a specific reservoir, utilizing micro-CT scanning to examine the intricate relationship between permeability and pore throat structure. Leveraging a random forest model, we establish an empirical formula tailored for high permeability reservoirs. Furthermore, we conduct in-situ CT scanning experiments across various displacement multiples to analyze the pore structure of unconsolidated sandstone cores. The derived relationship curves elucidate the positive correlations between porosity and average pore throat radius with displacement multiples, while revealing a negative correlation with tortuosity. These findings enable the formulation of quantitative formulas for permeability and displacement multiples within the studied block. Such insights prove instrumental in devising effective water injection development strategies, predicting dynamic reserves, and projecting water drive development for analogous unconsolidated sandstone reservoirs undergoing high water cut phases.

The Efficacy of Body-Weight Supported Treadmill Training and Neurotrophin-Releasing Scaffold in Minimizing Bone Loss Following Spinal Cord Injury.

Spinal cord injury (SCI) can lead to significant bone loss below the level of the lesion increasing the risk of fracture and increased morbidity. Body-weight-supported treadmill training (BWSTT) and transplantation strategies using neurotrophins have been shown to improve motor function after SCI. While rehabilitation training including BWSTT has also been effective in reducing bone loss post-SCI, the effects of transplantation therapies in bone restoration are not fully understood. Furthermore, the effects of a combinational treatment strategy on bone post-SCI also remain unknown. The aim of this study was to determine the effect of a combination therapy including transplantation of scaffold-releasing neurotrophins and BWSTT on the forelimb and hindlimb bones of a T9-T10 contused SCI animals. Humerus and tibia bones were harvested for Micro-CT scanning and a three-point bending test from four animal groups, namely injury, BWSTT (injury with BWSTT), scaffold (injury with scaffold-releasing neurotrophins), and combinational (injury treated with scaffold-releasing neurotrophins and BWSTT). BWSTT and combinational groups reported higher biomechanical properties in the tibial bone (below injury level) and lower biomechanical properties in the humerus bone (above injury level) when compared to the injury and scaffold groups. Studied structural parameters, including the cortical thickness and bone volume/tissue volume (BV/TV) were also higher in the tibia and lower in the humerus bones of BWSTT and combinational groups when compared to the injury and scaffold groups. While no significant differences were observed, this study is the first to report the effects of a combinational treatment strategy on bone loss in contused SCI animals and can help guide future interventions.

In-situ study of CO2-saturated brine reactive transport in carbonates considering the efficiency of wormhole propagation

Deep limestone aquifers are potential CO2 storage sites, but CO2-saturated brine reacts with the carbonate rock, changing its transport and storage properties. This study provided a preliminary investigation of the optimal injection rate of CO2-saturated brine in carbonate rocks. Indiana limestone cores were subjected to CO2-saturated brine injection at varied rates using an HPHT coreflooding setup with X-ray CT monitoring. The samples were characterized pre- and post-treatment in terms of porosity and pore size distribution using a gas porosimeter and NMR T2 measurements. Moreover, the reaction was evaluated by measuring the aqueous effluent calcium ions concentration as a function of throughput using ICP-OES analysis. A high-resolution micro-CT scan was used to capture the dissolution post-treatments and characterize the wormhole's size and patterns. Results showed that the wormholes broke through to the sample exit face after injecting 160, 48, and 36 pore volumes at 0.5, 1, and 2 cm3/min, respectively thereby revealing the importance of injection velocity. The ICP-OES analysis revealed that a larger dissolution rate was achieved at 2 cm3/min, which explained the fast wormhole propagation. An increase in rock porosity and the pore-size distributions was observed after coreflooding on all samples with minimum precipitation, as concluded from the NMR T2 relaxation time. A universal optimum Damköhler number can be obtained that enables calculating the optimum injection rate of CO2-saturated brine at different rock and fluid conditions. We speculated that the optimum Damköhler number could be different from the value of 0.29 proposed by Fredd and Fogler (1998). This study provides a preliminary understanding of the optimal CO2-saturated brine injection velocity that has an application for CO2 storage, water alternating gas (WAG) operations, and acid stimulation of carbonate formations.

Understanding the Structure-Function Relationship through 3D Imaging and Biomechanical Analysis: A Novel Methodological Approach Applied to Anterior Cruciate Ligaments.

Understanding the microstructure of fibrous tissues, like ligaments, is crucial due to their nonlinear stress-strain behavior from unique fiber arrangements. This study introduces a new method to analyze the relationship between the microstructure and function of anterior cruciate ligaments (ACL). We tested the procedure on two ACL samples, one from a healthy individual and one from an osteoarthritis patient, using a custom tensioning device within a micro-CT scanner. The samples were stretched and scanned at various strain levels (namely 0%, 1%, 2%, 3%, 4%, 6%, 8%) to observe the effects of mechanical stress on the microstructure. The micro-CT images were processed to identify and map fibers, assessing their orientations and volume fractions. A probabilistic mathematical model was then proposed to relate the geometric and structural characteristics of the ACL to its mechanical properties, considering fiber orientation and thickness. Our feasibility test indicated differences in mechanical behavior, fiber orientation, and volume distribution between ligaments of different origins. These indicative results align with existing literature, validating the proposed methodology. However, further research is needed to confirm these preliminary observations. Overall, our comprehensive methodology shows promise for improving ACL diagnosis and treatment and for guiding the creation of tissue-engineered grafts that mimic the natural properties and microstructure of healthy tissue, thereby enhancing integration and performance in biomedical applications.

Anatomy-constrained synthesis for spleen segmentation improvement in unpaired mouse micro-CT scans with 3D CycleGAN

Objective. Auto-segmentation in mouse micro-CT enhances the efficiency and consistency of preclinical experiments but often struggles with low-native-contrast and morphologically complex organs, such as the spleen, resulting in poor segmentation performance. While CT contrast agents can improve organ conspicuity, their use complicates experimental protocols and reduces feasibility. We developed a 3D Cycle Generative Adversarial Network (CycleGAN) incorporating anatomy-constrained U-Net models to leverage contrast-enhanced CT (CECT) insights to improve unenhanced native CT (NACT) segmentation. Approach. We employed a standard CycleGAN with an anatomical loss function to synthesize virtual CECT images from unpaired NACT scans at two different resolutions. Prior to training, two U-Nets were trained to automatically segment six major organs in NACT and CECT datasets, respectively. These pretrained 3D U-Nets were integrated during the CycleGAN training, segmenting synthetic images, and comparing them against ground truth annotations. The compound loss within the CycleGAN maintained anatomical fidelity. Full image processing was achieved for low-resolution datasets, while high-resolution datasets employed a patch-based method due to GPU memory constraints. Automated segmentation was applied to original NACT and synthetic CECT scans to evaluate CycleGAN performance using the Dice Similarity Coefficient (DSC) and the 95th percentile Hausdorff Distance (HD95p). Main results. High-resolution scans showed improved auto-segmentation, with an average DSC increase from 0.728 to 0.773 and a reduced HD95p from 1.19 mm to 0.94 mm. Low-resolution scans benefited more from synthetic contrast, showing a DSC increase from 0.586 to 0.682 and an HD95p reduction from 3.46 mm to 1.24 mm. Significance. Implementing CycleGAN to synthesize CECT scans substantially improved the visibility of the mouse spleen, leading to more precise auto-segmentation. This approach shows the potential in preclinical imaging studies where contrast agent use is impractical.

Rediscovering the unusual Cancellus makrothrix Stebbing, 1924 (Crustacea: Decapoda: Diogenidae) in the “Great African Seaforest”

The rare diogenid hermit crab Cancellus makrothrix Stebbing, 1924, previously known from only a few specimens collected a century ago from Algoa Bay, South Africa, has been found to be common in the kelp forest known as the “Great African Seaforest”, and rocky reefs, of False Bay, South Africa. This poorly known species, considered “aberrant” by some carcinologists, is one of 17 known in the genus Cancellus H. Milne Edwards, 1836, and the only of the genus known to occur in the coast of southern Africa. Cancelllus makrothrix lives in gastropod shells, whereas all other congenerics live in a variety of petricolous dwellings that are either excavated or worn away into cylindrical cavities. The newly collected material of C. makrothrix in South Africa, together with the study of historical museum specimens has made possible the detailed redescription and taxonomic discussion of this species presented herein, using full illustrations, photographs, and microCT scans. For future reference, the molecular CO1 genetic barcode is reported. A lectotype is selected from Stebbing’s original syntype material found to consist of two specimens: a female of which only several appendages remain, in the Natural History Museum, London, and a male, illustrated in the original description, in the Iziko South African Museum, Cape Town. Taxonomic remarks, comments on biological oddities, brief in situ and laboratory observations of live specimens, and a map summarizing the world distribution of species of Cancellus, are included.

Phenotype identification and genome-wide association study of ear-internode vascular bundles in maize (Zea mays).

The vascular bundle in the ear-internode of maize is a key conduit for transporting photosynthetic materials between "source" and "sink", making it critically important to examine its micro-phenotypes and genetic architecture to identify advantageous characteristics and cultivate high-yielding and high-quality varieties. Unfortunately, the limited observation methods and scope of study precludes any comprehensive and systematic investigations into the microscopic phenotypes and genetic mechanisms of vascular bundle in maize ear-internode. In this study, 47 phenotypic traits were extracted in 495 maize inbred lines using micro computed tomography (Micro-CT) scanning technology and a deep learning-based phenotype acquisition method for stem vascular bundle, which included stem slice-related, epidermis zone-related, periphery zone-related, inner zone-related and vascular bundles-related traits. Phenotypic analysis indicated that there was extensive phenotypic variation of vascular bundle traits in ear-internode, especially that in the inner zone. Of these, 30 phenotypic traits with heritability greater than 0.70 were conducted for GWAS, and a total of 4,225 significant SNPs and 416 candidate genes with detailed functional annotations were identified. Furthermore, 20 genes were highly expressed in stem-related tissues, especially in maize internodes. Functional analysis of candidate genes indicated that the pathways obtained for candidate genes of different trait groups were distinct, mainly involved in vitamin synthesis and metabolism, transport of substances, carbohydrate derivative catabolic process, protein transport and localization, and anatomical structure development. The results of this study will help to further understand the phenotypic traits of stem vascular bundles and provide a reference for revealing the genetic mechanism of maize ear-internode vascular bundles.

Applications of Micro-CT Imaging in Age-At-Death Estimates of Maya Dogs

ABSTRACT While there are many techniques for estimating age-at-death in archaeological dogs, the pulp cavity/tooth width ratio is considered one of the most accurate methods. This study adapts this technique for application to MicroCT imaging, a non-destructive methodology that is rapidly gaining ground in faunal analysis. Mandibular first molar and upper and lower canine teeth recovered from two Late Classic-Early Postclassic period sites in the Maya highlands, Moxviquil and Tenam Puente, were imaged using a SCANCO μCT35 MicroCT scanner. The widths of tooth roots, pulp cavities, cuspal enamel thicknesses, and enamel attrition measurements were then taken using both the scanner’s post-processing system and 3D Slicer, an open-access programme designed for imaging biomedical scans and other 3D files, and pulp cavity infilling ratios were calculated to obtain an age-at-death estimates in months for each specimen. Based on these, this study presents preliminary interpretations of canid age-at-death patterns at Moxviquil and Tenam Puente, including a range of juvenile specimens from a funerary cave context at Moxviquil.

Super-Resolution Ultrasound Imaging Using the Erythrocytes-Part I: Density Images.

A new approach for vascular super-resolution (SR) imaging using the erythrocytes as targets (SUper-Resolution ultrasound imaging of Erythrocytes (SURE) imaging) is described and investigated. SURE imaging does not require fragile contrast agent bubbles, making it possible to use the maximum allowable mechanical index (MI) for ultrasound scanning for an increased penetration depth. A synthetic aperture (SA) ultrasound sequence was employed with 12 virtual sources (VSs) using a 10-MHz GE L8-18i-D linear array hockey stick probe. The axial resolution was [Formula: see text]m) and the lateral resolution was [Formula: see text]m). Field IIpro simulations were conducted on 12.5- μ m radius vessel pairs with varying separations. A vessel pair with a separation of 70 μ m could be resolved, indicating a SURE image resolution below half a wavelength. A Verasonics research scanner was used for the in vivo experiments to scan the kidneys of Sprague-Dawley rats for up to 46 s to visualize their microvasculature by processing from 0.1 up to 45 s of data for SURE imaging and for 46.8 s for SR imaging with a SonoVue contrast agent. Afterward, the renal vasculature was filled with the ex vivo micro-computed tomography (CT) contrast agent Microfil, excised, and scanned in a micro-CT scanner at both a 22.6- μ m voxel size for 11 h and for 20 h in a 5- μ m voxel size for validating the SURE images. Comparing the SURE and micro-CT images revealed that vessels with a diameter of 28 μ m, five times smaller than the ultrasound wavelength, could be detected, and the dense grid of microvessels in the full kidney was shown for scan times between 1 and 10 s. The vessel structure in the cortex was also similar to the SURE and SR images. Fourier ring correlation (FRC) indicated a resolution capability of 29 μ m. SURE images are acquired in seconds rather than minutes without any patient preparation or contrast injection, making the method translatable to clinical use.

Volumetric change of calcium silicate-based repair materials in a simulated inflammatory environment: A micro-computed tomography study

Context: An acidic hydrogen potential (pH) in an inflammatory condition in the periapical tissues may affect the properties of repair bioceramic cement. Aims: The aim of this study was to evaluate the effect of pH on the volumetric change of the ready-to-use bioceramic NeoPUTTY (NP) compared to the powder/liquid MTA Repair HP (MTAHP) after immersion in butyric acid (BA, pH 4.1) or phosphate-buffered saline (PBS, pH 7.35). Subjects and Methods: Dentin tubes filled with NP or MTAHP were scanned in micro-computed tomography (micro-CT) after 24 h. Then, the specimens were immersed in 1.5 mL of BA: NP/BA, MTAHP/BA or PBS: NP/PBS, MTAHP/PBS. After 7 days, new micro-CT scans were performed. The percentage of volumetric change (extremities and internal part) of the materials was assessed. Statistical Analysis Used: ANOVA/Tukey and Kruskal–Wallis tests were performed (α =0.05). Results: All materials showed a volumetric decrease after immersion in BA or PBS at the extremities in contact with the solutions. MTAHP/BA showed the highest volumetric loss. There was no difference in the volumetric change when the internal part of the materials was evaluated. Conclusions: An acid pH negatively affects the volumetric stability of MTAHP. Low values of volumetric change were demonstrated for NP in both immersion environments.

Induced Periodontitis in Rats With Three Ligature Types: An Exploratory Study.

The placement of ligatures in the cervical area of rat molars is considered as a predictable model to induce periodontitis. The present explorative study aimed to compare the efficacy of metal wires (MWs), without or with sandblasting, versus silk ligatures (SLs) in inducing periodontal bone loss in rats. Twenty-four Wistar rats were randomly divided into three groups of eight rats that received three different types of ligatures (MW, sandblasted wire [SMW], and SL) around their first right mandibular molar, while the contralateral tooth was left without the ligature and served as a control. Bone loss was assessed by measuring the distance from the cementoenamel junction (CEJ) to the bone crest at the distal aspect of the first molar on central mesiodistal sections generated from micro-CT scans taken 24 and 35 days after ligature placement. In the SL group, only in two rats the ligatures were retained until the end of the 24-day period; in all other animals, the ligatures were lost at some time point. In the SMW, the ligatures were retained only for the 24-day period. In the MW group, no ligatures were lost. Irrespective of the group or experimental period, the difference in the crestal bone level between ligated and control teeth was in most cases z < 0.20 mm, that is, in 19 out of 25 pairs of teeth. In a few cases, the bone crest was more apically located at the control teeth compared to the ligated ones (four cases each, during both 24- and 35-day experimental periods). Bone loss was minimal during the experimental period, with no significant differences between the test and control teeth, or among the three types of ligatures. MWs, not even roughened, do not seem to be a better alternative to SLs for inducing bone loss in the experimental periodontitis model in the rat. This assumption, however, has to be confirmed in a larger, well-powered study.

Evaluating the Remineralizing Effects of Calcium Sucrose Phosphate and Casein Phosphopeptide-Amorphous Calcium Phosphate Toothpastes on Artificial Carious Lesions Using Micro-computed Tomography: An In Vitro Investigation.

Background White spot lesions (WSLs) are common early indicators of enamel demineralization, particularly in pediatric orthodontic patients. Effective remineralization of these lesions is crucial for preventing further dental decay. This study aimed to evaluate the three-dimensional remineralization efficacy of two commercial toothpastes, calcium sucrose phosphate (CaSP) and casein phosphopeptide-amorphous calcium phosphate (CPP-ACP), using micro-computed tomography (micro-CT). Objectives To compare the remineralization efficacy of CaSP and CPP-ACP on artificially created WSLs in human premolar enamel using micro-CT assessment. Materials and methods Freshly extracted, caries-free human premolars were used for the purpose of the study. Teeth with any defects, including caries, non-carious lesions, fractures, or hypocalcifications, were excluded. Teeth were stored in a saline solution with 0.1% thymol at +4°C until experimentation. Enamel slabs (N = 18) of 3 x 3 x 1.5 mm were prepared from the buccal surfaces of the premolars and polished to a mirror-like finish. The slabs were divided into three groups (n=6 each): control, CaSP, and CPP-ACP. Specimens were demineralized in a demineralization solution for 72 hours and then treated with the respective toothpastes or remineralizing solutions for 13 days. Micro-CT scanning was performed to assess changes in enamel volume and mineral density. Statistical analysis included Shapiro-Wilk tests, paired t-tests, and one-way ANOVA with post-hoc Tukey's HSD tests. Results Enamel volume changes were significant between groups (p<0.01), with the CaSP group showing the largest remineralization effect. Enamel mineral density changes were also significant (p=0.004), with the CPP-ACP group showing the greatest improvement in mineral density. Conclusions CaSPand CPP-ACPare both effective in remineralizing artificial enamel lesions. While CaSP shows comparable efficacy to CPP-ACP, further research is needed to confirm these findings in clinical settings. CaSP pastecan be considered a viable, cost-effective alternative for enamel remineralization.

Sound reception and hearing capabilities in the Little Penguin (Eudyptula minor): first predicted in-air and underwater audiograms.

Despite increasing concern about the effects of anthropogenic noise on marine fauna, relevant research is limited, particularly in those inaccessible species, such as the Little Penguin (Eudyptula minor). In this study, we collected freshly deceased Little Penguins for dissection and micro-computed tomography (microCT) scans. The head structures, including the ear apparatus, were reconstructed based on high-resolution imaging data for the species. Moreover, three-dimensional finite-element models were built based on microCT data to simulate the sound reception processes and ear responses to the incident planar waves at the selected frequencies. The received sound pressure fields and motion (i.e. displacement and velocity) of the internal ear-related structures were modelled. The synergistic response of ear components to incident aerial and underwater sounds was computed to predict the hearing capabilities of the Little Penguins across a broad frequency range (100 Hz-10 kHz), both in air and under water. Our predicted data showed good agreement with other diving birds in both the form and range of auditory sensitivity. This study demonstrates a promising method to study hearing in other inaccessible animals. The outputs from this study can inform noise impact mitigation and conservation management.

Automated segmentation of clinical CT scans of the cochlea and analysis of the cochlea's vertical profile

PurposeKnowledge of the cochlear anatomy in individual patients is helpful for improving electrode selection and placement during cochlear implantation, as well as in surgical planning. The aim of this study was to develop a model-free automated segmentation algorithm to obtain 3D surfaces from clinical computed tomography (CT) scans that describe an individual's cochlear anatomy and can be used to quantitatively analyze the cochlea's vertical trajectory. MethodsClinical CT scans were re-oriented and re-sliced to obtain mid-modiolar slices. Using these slices, we segmented the cross-section of the cochlea. Results3D surfaces were obtained for the first 1.5 turns of 648 cochleae. Validation of our algorithm against the manually segmented ground truth obtained from 8 micro-CT scans showed good agreement, with 90 % area overlap and an average distance of 0.11 mm between the segmentation contours. The average cochlear duct length for the basal turn was 16.1 mm along the central path and 22.4 mm along the outer wall. The use of an intrinsic, observer-independent coordinate system and principal component analysis enabled unambiguous quantitative evaluation of the vertical trajectory of the cochlea, revealing only a weak correlation between the symmetry of the commonly used basal turn diameters (B-ratio of A and B diameters) and the profile of the vertical trajectory. ConclusionA model-free segmentation algorithm can achieve similar accuracy as previously published methods relying on statistical shapes. Quantitative analysis of the vertical trajectory can replace the categorization into rollercoaster, sloping, or intermediate vertical trajectory types.

Hierarchical triply periodic minimal surface shell lattices with superior isotropic elasticity: Design guidelines, fabrication, and validation

Hierarchical triply periodic minimal surface (TPMS) shell lattices exhibit a wide range of tailorable properties that can be fine-tuned by lattice design. Recent advances in additive manufacturing towards high resolution enable the precise fabrication of hierarchical TPMS lattices. However, the isotropic behavior of hierarchical TPMS lattices has received little attention. In this study, we focus on the design of hierarchical TPMS lattices to explore their superior isotropic elasticity. By considering three unique geometric parameters of hierarchical TPMS: cell length ratio, relative density, and order number, multiple representative isotropic hierarchical TPMS lattices can be achieved at the same given relative density, which significantly expands its design space. The resultant lattices retain a minimal mid-surface and exhibit a large range of tailorable stiffness. To validate their isotropic elasticity, high-precision laser powder bed fusion was adopted to fabricate representative isotropic lattices and their anisotropic counterparts. Morphology observation and micro-CT scan show that the fabricated samples are dense, and their geometries are highly consistent with the designed models. Quasi-static compression tests further confirm the isotropic elasticity in the new designs. Moreover, a prediction rule was proposed to assess whether an isotropic hierarchical TPMS lattice can be obtained from two selected single-level lattices, which significantly enhances the design efficiency. As a result, the design method and principles can be summarized in this study to provide effective design guidelines to swiftly create hierarchical shell lattices with superior isotropic elasticity.

Unveiling the impact of short fibre reinforcement and extrusion properties on microstructure of 3D printed polycarbonate composites

In the evolving realm of additive manufacturing, this study investigates the microstructural and mechanical implications of short fibre reinforcement within Polycarbonate (PC) composites fabricated via material extrusion (MEX). The research specifically examines the roles of extrusion temperature, extrusion multiplier and fibre content on void content and fibre alignment, with a focus on their influence on inter-bead strength and overall print quality. Through a combination of high-resolution micro-CT scanning and mechanical testing, the study reveals that an increase in the extrusion multiplier significantly enhances fibre-bridging up to 47 % and inter-bead adhesion up to 237 % depending on the fibre content. It also traces an optimal fibre content threshold that maximizes benefits of fibre bridging, thereby bolstering the mechanical properties of the material. The comprehensive analysis demonstrates that precise control over the extrusion parameters as well as filament quality are crucial for exploiting the full potential of fibre reinforcement in 3D printed structures. This research advances our understanding of MEX in fabricating short fibre-reinforced composites, offering novel insights for tailoring material properties to meet the demands of high-performance applications.