Metrology Laboratory Research Articles

Neutron spectroscopy measurements of 14 MeV neutrons at unprecedented energy resolution and implications for deuterium–tritium fusion plasma diagnostics

An accurate calibration of the JET neutron diagnostics with a 14 MeV neutron generator was performed in the first half of 2017 in order to provide a reliable measurement of the fusion power during the next JET deuterium–tritium (DT) campaign. In order to meet the target accuracy, the chosen neutron generator has been fully characterized at the Neutron Metrology Laboratory of the National Physical Laboratory (NPL), Teddington, United Kingdom. The present paper describes the measurements of the neutron energy spectra obtained using a high-resolution single-crystal diamond detector (SCD). The measurements, together with a new neutron source routine ‘ad hoc’ developed for the MCNP code, allowed the complex features of the neutron energy spectra resulting from the mixed D/T beam ions interacting with the T/D target nuclei to be resolved for the first time. From the spectral analysis a quantitative estimation of the beam ion composition has been made. The unprecedented intrinsic energy resolution (<1% full width at half maximum (FWHM) at 14 MeV) of diamond detectors opens up new prospects for diagnosing DT plasmas, such as, for instance, the possibility to study non-classical slowing down of the beam ions by neutron spectroscopy on ITER.

IRRADIATOR SYSTEM FOR MANGANESE SULFATE BATH EFFICIENCY MEASUREMENTS USING A PLUTONIUM-BERYLLIUM NEUTRON SOURCE.

This study describes the use of a neutron irradiator system based on a plutonium-beryllium neutron source for MnSO4 solution activation for use to determine the MSB system efficiency. Computational simulations using Monte Carlo code were performed to establish the main characteristics of the irradiator system. Among the simulated geometries and volumes, semi-cylindrical shape with 84.5 cm3 of MnSO4 solution yielded the best option to be built. Activity measurements were performed with a high-pure germanium detector to validate the new irradiation system. Results showed an average efficiency and uncertainty of the experimental standard deviation of the mean: 5.742 × 10-4 ± 0.036 × 10-4 (coverage factor k = 1), for MSB system. Efficiency value obtained shows good correlation to other published methods (i.e. a relative difference of 0.07%). This alternative metrological method demonstrated the utility of neutron sources for the irradiation of solutions in metrology laboratories providing a cost-efficient alternative to nuclear reactors or particle accelerators.

A study to assess the long-term stability of the ionization chamber reference system in the LNMRI

Ionization chambers are used as secondary standard in order to maintain the calibration factors of radionuclides in the activity measurements in metrology laboratories. Used as radionuclide calibrator in nuclear medicine clinics to control dose in patients, its long-term performance is not evaluated systematically. A methodology for long-term evaluation for its stability is monitored and checked. Historical data produced monthly of 2012 until 2017, by an ionization chamber, electrometer and 226Ra, were analyzed via control chart, aiming to follow the long-term performance. Monitoring systematic errors were consistent within the limits of control, demonstrating the quality of measurements in compliance with ISO17025.

Reliability of an x-ray system for calibrating and testing personal radiation dosimeters

Metrology laboratories are expected to maintain standardized radiation beams and traceable standard dosimeters to provide reliable calibrations or testing of detectors. Results of the characterization of an x-ray system for performing calibration and testing of radiation dosimeters used for individual monitoring are shown in this work.

Evaluation of a LiF:Mg,Ti thermoluminescent ring dosimeter according to the IEC 62387:2012 Standards

This work shows results of type testing of a ring radiation dosimeter system under IEC 62387:2012. The personal dosimeter investigated in this work consists of a commercial one element plastic ring which contains an LiF:Mg,Ti thermoluminescent pellet. By applying requirements for statistical fluctuations and linearity, a minimum measurable dose in Hp(0.07) was established. Energy and angular dependence aided in determining energy correction factors and fading requirements were used to select the most appropriate preheat scheme. Type testing of passive radiation monitors was performed in the Radiation Metrology Laboratory (LMRI-DEN/UFPE) of the Federal University of Pernambuco and is a major step in Brazil for the independent evaluation of these dosimeters, currently not available in the country.

Geant4 simulation of ion chambers response to 60Co spectrum of LNMRI/IRD Shepherd 81-14D Radiator

The National Ionizing Radiation Metrology Laboratory of the Radioprotection and Dosimetry Institute (LNMRI / IRD) has recently acquired a Shepherd 81-14D Radiator. In this work we simulate, using Geant4, the behavior with the inverse square law radiation for 3 models of PTW spherical chambers used in radioprotection, a relevant information to planning the measurements. We did the corrections for the attenuation and scattering in the air for each distance, where we used the 60Co spectrum simulated previously.

65Zn and 133Ba standardizing by photon-photon coincidence counting

The LNMRI/Brazil has deployed a system using X-gamma coincidence technique for the standardizing radionuclide, which present simple and complex decay scheme with X-rays of energy below 100 keV. The work was carried on radionuclide metrology laboratory using a sodium iodide detector, for gamma photons, in combination with a high purity germanium detector for X-rays. Samples of 65Zn and 133Ba were standardized and the results for both radionuclides showed good precision and accuracy when compared with reference values. The standardization differences were 0.72 % for 65Zn and 0.48 % for 133Ba samples.

IMPROVEMENTS IN THE THERMAL NEUTRON CALIBRATION UNIT, TNF2, AT LNMRI/IRD.

The standard thermal neutron flux unit, TNF2, in the Brazilian National Ionizing Radiation Metrology Laboratory was rebuilt. Fluence is still achieved by moderating of four 241Am-Be sources with 0.6 TBq each. The facility was again simulated and redesigned with graphite core and paraffin added graphite blocks surrounding it. Simulations using the MCNPX code on different geometric arrangements of moderator materials and neutron sources were performed. The resulting neutron fluence quality in terms of intensity, spectrum and cadmium ratio was evaluated. After this step, the system was assembled based on the results obtained from the simulations and measurements were performed with equipment existing in LNMRI/IRD and by simulated equipment. This work focuses on the characterization of a central chamber point and external points around the TNF2 in terms of neutron spectrum, fluence and ambient dose equivalent, H*(10). This system was validated with spectra measurements, fluence and H*(10) to ensure traceability.

Geodesy and metrology with a transportable optical clock

The advent of novel measurement instrumentation can lead to paradigm shifts in scientific research. Optical atomic clocks, due to their unprecedented stability and uncertainty, are already being used to test physical theories and herald a revision of the International System of units (SI). However, to unlock their potential for cross-disciplinary applications such as relativistic geodesy, a major challenge remains. This is their transformation from highly specialized instruments restricted to national metrology laboratories into flexible devices deployable in different locations. Here we report the first field measurement campaign performed with a ubiquitously applicable $^{87}$Sr optical lattice clock. We use it to determine the gravity potential difference between the middle of a mountain and a location 90 km apart, exploiting both local and remote clock comparisons to eliminate potential clock errors. A local comparison with a $^{171}$Yb lattice clock also serves as an important check on the international consistency of independently developed optical clocks. This campaign demonstrates the exciting prospects for transportable optical clocks.

NEUTRON FIELD CHARACTERISTICS AT RADIATION METROLOGY LABORATORY OF STUK.

Radiation metrology laboratory at Radiation and Nuclear Safety Authority (STUK) is Finnish national laboratory for ionizing radiation. In order to establish personal dose equivalent available for neutron calibration service, a project was started to evaluate the neutron reference fields in the present facility. The irradiation room conditions were characterized in order to establish reference conditions for personal dose equivalent. To verify the validity of the calculations, ambient dose equivalent rates and room return were measured and calculated for 241AmBe and 252Cf sources. First results of Monte Carlo calculations and measurements are presented in this article.

Final report for CCQM-K86.b relative quantification of Bt63 in GM rice matrix sample

A key comparison CCQM-K86.b was performed to demonstrate and document the capacity of National Metrology Institutes (NMIs) and Designated Institutes (DIs) in the determination of the relative quantity of two specific genomic DNA fragments present in a rice powder. The study provides the support for the following measurement claim: "Quantification of the ratio of the number of copies of specified intact sequence fragments of a length up to 150 nucleotides following extraction from an unprocessed, high starch ground seed matrix, with a copy number ratio from 0.005 to 1". The study was carried out under the auspices of the Nucleic Acids Working Group (NAWG) of the Consultative Committee for Amount of Substance: Metrology in Chemistry and Biology (CCQM) and was jointly coordinated by the National Institute of Metrology, China (NIMC) and Government Laboratory Hong Kong (GLHK).The following laboratories (in alphabetical order) participated in this key comparison study: CENAM (Mexico); GLHK (Hong Kong); LGC (United Kingdom); NIB (Slovenia); NIMC (P.R. of China); NIMT (Thailand); NMIA (Australia); NMIJ (Japan); TÜBITAK-UME (Turkey). Good agreement was observed between the reported results.KEY WORDS FOR SEARCHGenetically modified (GM) crops, digital PCR, copy number ratio, GM riceMain textTo reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/.The final report has been peer-reviewed and approved for publication by the CCQM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).

Diffraction gratings metrology and ray-tracing results for an XUV Raman spectrometer at FLASH.

The extreme-ultraviolet double-stage imaging Raman spectrometer is a permanent experimental endstation at the plane-grating monochromator beamline branch PG1 at FLASH at DESY in Hamburg, Germany. This unique instrument covers the photon energy range from 20 to 200 eV with high energy resolution of about 2 to 20 meV (design values) featuring an efficient elastic line suppression as well as effective stray light rejection. Such a design enables studies of low-energy excitations like, for example, phonons in solids close to the vicinity of the elastic line. The Raman spectrometer effectively operates with four reflective off-axial parabolic mirrors and two plane-grating units. The optics quality and their precise alignment are crucial to guarantee best performance of the instrument. Here, results on a comprehensive investigation of the quality of the spectrometer diffraction gratings are presented. The gratings have been characterized by ex situ metrology at the BESSY-II Optics Laboratory, employing slope measuring deflectometry and interferometry as well as atomic force microscopy studies. The efficiency of these key optical elements has been measured at the at-wavelength metrology laboratory using the reflectometer at the BESSY-II Optics beamline. Also, the metrology results are discussed with respect to the expected resolving power of the instrument by including them in ray-tracing studies of the instrument.

Intercomparison of 99mTc, 18F and 111In activity measurements with radionuclide calibrators in Belgian hospitals

This study presents current status of performance of radiopharmaceutical activity measurements using radionuclide calibrators in Belgium. An intercomparison exercise was performed among 15 hospitals to test the accuracy of 99mTc, 18F and 111In activity measurements by means of radionuclide calibrators. Four sessions were held in different geographical regions between December 2013 and February 2015. The data set includes measurements from 38 calibrators, yielding 36 calibrations for 99mTc and 111In, and 21 calibrations for 18F. For each radionuclide, 3 ml of stock solution was measured in two clinical geometries: a 10 ml glass vial and a 10 ml syringe. The initial activity was typically 100 MBq for 99mTc, 15 MBq for 111In and 115 MBq for 18F. The reference value for the massic activity of the radioactive solutions was determined by means of primary and secondary standardisation techniques at the radionuclide metrology laboratory of the JRC.The overall results of the intercomparison were satisfactory for 99mTc and 18F, since most radionuclide calibrators (>70%) were accurate within ±5% of the reference value. Nevertheless, some devices underestimated the activity by 10–20%. Conversely, 111In measurements were strongly affected by source geometry effects and this had a negative impact on the accuracy of the measurements, in particular for the syringe sample. Large overestimations (up to 72%) were observed, even when taking into account the corrections and uncertainties supplied by the manufacturers for container effects. The results of this exercise encourage the hospitals to perform corrective actions to improve the calibration of their devices where needed.

Współpraca transgraniczna w nauczaniu metrologii współrzędnościowej

VSB – Technical University of Ostrava, Faculty of Mechanical Engineering together with University of Bielsko-Biala, Laboratory of Metrology submitted a proposal of common education project in the framework of the Interreg V-A Czech Republic–Poland program entitled: ‘Increasing employment of graduates of technical universities in practice’. The paper presents an outline for chosen laboratory classes based on the standards ISO 10360, VDI/VDE 2617 and ISO 230.

Fast Comparison of High-Precision Time Scales Using GNSS Receivers

Comparison of high-performance time scales generated by atomic clocks in laboratories of time and frequency metrology is usually performed by means of the Common View method. Laboratories are equipped with specialized GNSS receivers which measure the difference between a local time scale and a time scale of the selected satellite. Every receiver generates log files in CGGTTS data format to record measured differences. In order to calculate time differences recorded by two receivers, it is necessary to obtain these logs from both receivers and process them. This paper deals with automation and speeding up of these processes.

Disintegration rate and gamma-ray emission probability per decay measurement of Cu-64

The procedure followed by the Nuclear Metrology Laboratory (LMN) at the IPEN for the standardization of activity of 64Cu is described. The measurement was carried out in a 4π (PC) β-γ coincidence system. The activity per unit mass of the solution was determined by the extrapolation technique. The events were registered using a Time to Amplitude Converter (TAC) associated with a Multi-channel Analyzer. The gamma-ray emission probability per decay of the 1345.7keV transition of 64Cu determined with a calibrated REGe gamma-ray spectrometer was (0.472 ± 0.010) %, in agreement with the literature.

Purity Measurement of Human C-Peptide by High Performance Liquid Chromatography and Quantitative Nuclear Magnetic Resonance

Purity determination of human C-peptide (hCP) with metrological traceability is fundamental to accurate and comparable clinical analysis of hCP. Based on high performance liquid chromatography and quantitative nuclear magnetic resonance (qNMR) with a purified hCP, a method was reported to determine the purity of an hCP sample used in an intercomparison. The composition of deuterium solvent for qNMR was optimized to improve the separation of the β-proton of an aspartic acid residue in the sequence of hCP, which were used for NMR integration. The calculated mean and uncertainty (77.86 ± 3.85%) are consistent with the results (80.18 ± 0.62%) of different methods reported by many metrological laboratories. This method extended the application of qNMR to peptides with high molecular weight of about 3020.

Rapid and accurate assessment of the activity measurements in Brazilian hospitals and clinics

Traceability in Nuclear Medicine Service (NMS) measurements was checked by the Institute of Radioprotection and Dosimetry (IRD) through the Institute of Energy and Nuclear Research (IPEN). In 2016, IRD ran an intercomparison program and invited Brazilian NMS authorized to administer 131I to patients. Sources of 131I were distributed to 33 NMSs. Three other sources from the same solution were sent to IRD, after measurement at IPEN. These sources were calibrated in the IRD reference system. A correction factor of 1.013 was obtained. Ninety percent of the NMS comparisons results are within ±10% of the National Laboratory of Metrology of Ionizing Radiation (LNMRI) value, the Brazilian legal requirement.

A compact design of multi-feeder data logging system for power quality measurement with a multiplexer and a single PQ transducer

This paper presents a simple and costs effective equipment design multi-feeder data logger for recording and monitoring power quality. The system design uses remote supervising and multi-feeder data logging system (RESMOS). The data collected through resmos portable unit (RMPU) will automatically be saved with the format as binary and comma separated value (CSV). The time setting on the RMPU can be configured with minimum one minute per logging. This data logger uses a single transducer with a multiplexer for recording and monitoring ten channels of power quality at busbar. The system design has been validated with national metrology laboratory scientific and industrial research institute of Malaysia (SIRIM). This tool has the advantage that it can be used to measure harmonic data more than 21st at the same time for ten channels and equipped with software making it easier for analysis data with low operational costs versus another power quality equipment. The experimental results indicate that the proposed technique can accelerate data reading with conversion rate one sample per second for each channel. The device can be used to measure harmonic level and power quality with a confidence level above 95% and percentage error under 2.43% for total harmonics distortion (THD) and 1.72% for voltage harmonics.

Long, elliptically bent, active X-ray mirrors with slope errors

Actively bent X-ray mirrors are important components of many synchrotron and X-ray free-electron laser beamlines. A high-quality optical surface and good bending performance are essential to ensure that the X-ray beam is accurately focused. Two elliptically bent X-ray mirror systems from FMB Oxford were characterized in the optical metrology laboratory at Diamond Light Source. A comparison of Diamond-NOM slope profilometry and finite-element analysis is presented to investigate how the 900 mm-long mirrors sag under gravity, and how this deformation can be adequately compensated using a single, spring-loaded compensator. It is shown that two independent mechanical actuators can accurately bend the trapezoidal substrates to a range of elliptical profiles. State-of-the-art residual slope errors of <200 nrad r.m.s. are achieved over the entire elliptical bending range. High levels of bending repeatability (ΔR/R = 0.085% and 0.156% r.m.s. for the two bending directions) and stability over 24 h (ΔR/R= 0.07% r.m.s.) provide reliable beamline performance.