Method For Extraction Of Genomic DNA Research Articles

Extraction of nuclear DNA from rhinoceros horn and characterization of DNA profiling systems for white (Ceratotherium simum) and black (Diceros bicornis) rhinoceros

Rhinoceros horn is now worth more, per unit weight, than gold, diamonds, or cocaine. Rhinoceros horn has been used in traditional Asian medicine as a presumed cure for a wide range of ailments. Rhinoceros poaching in South Africa has, on average, more than doubled each year over the past 5 years with the rapid economic growth in east and southeast Asia being assumed to be the primary factor driving the increased demand for horn. Here we report on the characterization of methods for genomic DNA extraction from rhinoceros horn and on DNA profiling systems for white (Ceratotherium simum) and black (Diceros bicornis) rhinoceros. The DNA profiling system described includes 22 short tandem repeat (STR), or microsatellite, markers and a gender marker (ZF1), which have been used previously in various studies on rhinoceros. Using a θ value of 0.1, a conservative estimate of random match probability in 5 white rhinoceros ranged from 1:7.3x10(6) to 1:3.0x10(8). Given that the total population of white rhinoceros is approximately 20,000 such random match probabilities indicate that the genotyping system described provides data which can be used for evidentiary purposes. Furthermore, the methods are appropriate for use in investigations involving trace amounts of rhinoceros horn and the matching of profiles obtained from seized rhinoceros horn with material collected from live animals or poached carcasses.

A rapid and inexpensive one-tube genomic DNA extraction method from Agrobacterium tumefaciens.

Many methods have been used to isolate genomic DNA, but some of them are time-consuming and costly, especially when extracting a large number of samples. Here we described an easy protocol using two simple solutions for DNA extraction from A. tumefaciens cells. Compared with the standard protocol, this protocol allows rapid DNA isolation with comparable yield and purity at negligible cost. Following this protocol, we have demonstrated: (1) gDNA extraction was achieved within 15 min; (2) this method was cost-effective, since it only used calcium chloride and lysozyme; SDS, phenol, chloroform and proteinase K were not necessary; (3) the method gave high yield of gDNA (130 ng/loopful culture) compared with standard protocol that was suitable for restriction analysis; (4) the protocol can be carried out in a single test tube and the cells directly from solid media can be used. Thus, this protocol offers an easy, efficient and economical way to extract genomic DNA from A. tumefaciens.

A novel method of genomic DNA extraction for Cactaceae.

• Premise of the study: Genetic studies of Cactaceae can at times be impeded by difficult sampling logistics and/or high mucilage content in tissues. Simplifying sampling and DNA isolation through the use of cactus spines has not previously been investigated.• Methods and Results: Several protocols for extracting DNA from spines were tested and modified to maximize yield, amplification, and sequencing. Sampling of and extraction from spines resulted in a simplified protocol overall and complete avoidance of mucilage as compared to typical tissue extractions. Sequences from one nuclear and three plastid regions were obtained across eight genera and 20 species of cacti using DNA extracted from spines.• Conclusions: Genomic DNA useful for amplification and sequencing can be obtained from cactus spines. The protocols described here are valuable for any cactus species, but are particularly useful for investigators interested in sampling living collections, extensive field sampling, and/or conservation genetic studies.

Potential application of superparamagnetic nanoparticles for extraction of bacterial genomic DNA from contaminated food and environmental samples

Isolation of high-molecular-weight DNA is essential for many molecular biology applications. Owing to the presence of polymerase chain reaction (PCR) inhibitors, there is a scarcity of suitable protocols for PCR-ready DNA extraction from food and natural environments. The conventional chemical methods of DNA extraction are time consuming and laborious and the yield is very low. Thus the aim of this research was to develop a simple, rapid, cost-effective method of genomic DNA extraction from food (milk and fruit juice) and environmental (pond water) samples and to detect bacterial contaminants present in those samples. This approach is efficient for both Gram-positive and Gram-negative bacteria from all the studied samples. Herein super paramagnetic bare iron oxide nanoparticles were implemented for bacterial genomic DNA isolation. The method was also compared to the conventional phenol-chloroform method in the context of quality, quantity and timing process. This method took only half an hour or less to obtain high-molecular-weight purified DNA from minimum bacterial contamination. Additionally, the method was directly compatible to PCR amplification. The problem of availability of suitable generalized methods for DNA isolation from various samples including food and environmental has been solved by a nanobiotechnological approach that may prove to be extremely useful in biotechnological applications.

A protocol for high-quality genomic DNA extraction from legumes

Current DNA extraction protocols, which require liquid nitrogen, lyophilization and considerable infrastructure in terms of instrumentation, often impede the application of biotechnological tools in less researched crops in laboratories in developing countries. We modified and optimized the existing CTAB method for plant genomic DNA extraction by avoiding liquid nitrogen usage and lyophilization. DNA was extracted directly from freshly harvested leaves ground in pre-heated CTAB buffer. Chloroform:isoamyl alcohol (24:1) and RNase treatments followed by single-purification step decontaminated the samples thereby paving way for selective extraction of DNA. High molecular weight DNA yield in the range of 328 to 4776 ng/μL with an average of 1459 ng/μL was obtained from 45 samples of cultivated and wild Cajanus species. With an absorbance ratio at 260 to 280 nm, a range of 1.66 to 2.20, and a mean of 1.85, very low levels of protein and polysaccharide contamination were recorded. Forty samples can be extracted daily at a cost between 1.8 and US$2.0 per plant sample. This modified method is suitable for most plants especially members of the Leguminosae. Apart from Cajanus, it has been extensively applied in DNA extraction from Cicer and Vigna species.

한국의 논 토양 미생물 다양성 분석을 위한 Quantitative Real-time PCR의 응용

BACKGROUND: In order to develop effective assessment method for Korean paddy soil microbial community structure, reliable genomic DNA extraction method from paddy soil and quantitative real-time PCR (qRT-PCR) method are needed to establish METHODS AND RESULTS: Out of six conventional soil genomic DNA extraction methods, anion exchange resin purification method was turn to be the most reliable. Various PCR primers for distinguishing five bacterial phylum (α-Proteobacteria, β-Proteobacteria, Actinobacteria, Bacteroidetes, Firmicutes), all bacteria, and all fungi were tested. Various qRT-PCR temperature conditions were also tested by repeating experiment. Finally, both genomic DNA extraction and qRT-PCR methods for paddy soil were well established. CONCLUSION: Quantitative real-time PCR (qRT-PCR) method to assess paddy soil microbial community was established.

An Efficient Method for Genomic DNA Extraction from Different Molluscs Species

The selection of a DNA extraction method is a critical step when subsequent analysis depends on the DNA quality and quantity. Unlike mammals, for which several capable DNA extraction methods have been developed, for molluscs the availability of optimized genomic DNA extraction protocols is clearly insufficient. Several aspects such as animal physiology, the type (e.g., adductor muscle or gills) or quantity of tissue, can explain the lack of efficiency (quality and yield) in molluscs genomic DNA extraction procedure. In an attempt to overcome these aspects, this work describes an efficient method for molluscs genomic DNA extraction that was tested in several species from different orders: Veneridae, Ostreidae, Anomiidae, Cardiidae (Bivalvia) and Muricidae (Gastropoda), with different weight sample tissues. The isolated DNA was of high molecular weight with high yield and purity, even with reduced quantities of tissue. Moreover, the genomic DNA isolated, demonstrated to be suitable for several downstream molecular techniques, such as PCR sequencing among others.

Modified CTAB Method for High Quality Genomic DNA Extraction from Medicinal Plants

Modified CTAB Method for High Quality Genomic DNA Extraction from Medicinal Plants

Degradation of transgene DNA in genetically modified herbicide-tolerant rice during food processing

In order to assess the effect of food processing on the degradation of exogenous DNA components in sweet rice wine and rice crackers made from genetically modified (GM) rice (Oryza sativa L.), we developed genomic DNA extraction methods and compared the effect of different food processing procedures on DNA degradation. It was found that the purity, quantity and quality of DNA by alkaline lysis method were higher than by CTAB (cetyltrimethylammonium bromide) method. For sweet rice wine, CAMV35S (cauliflower mosaic virus 35S) promoter and NOS (nopaline synthase) terminator were degraded by the third day, whereas the exogenous gene Bar (bialaphos resistance) remained unaffected. For rice crackers, boiling, drying and microwaving contributed to the initial degradations of DNA. Baking resulted in further degradations, and frying led to the most severe changes. These results indicated that the stability of DNA in GM rice was different under different processing conditions. For sweet rice wine, Bar was most stable, followed by NOS, CAMV35S, and SPS. For rice crackers, CAMV35S was most stable, followed by SPS, NOS, and Bar.

An improved method for genomic DNA extraction from strawberry leaves

Several extraction methods of genomic DNA for identification and characterization of genetic diversity in different plant species are routinely applied during molecular analysis. However, the presence of undesirable compounds such as polyphenols and polysaccharides is one of the biggest problems faced during the isolation and purification of high quality DNA in plants. Therefore, achievement of fast and accurate methods for DNA extraction is crucial in order to produce pure samples. Leaves of strawberry genotypes (Fragaria ananassa) have high contents of polysaccharides and polyphenols which increase the sample viscosity and decrease the DNA quality, interfering with the PCR performance. Thereby, in this study we evaluated the quality and amount of genomic DNA extracted from young leaves of strawberry after tissue lyophilization and maceration in presence of polivinilpirrolidone (PVP). The CTAB method was used as reference procedure and it was modified to improve the DNA extraction. The modifications consisted of tissue lyophilization overnight until it was completely freeze-dried and addition of PVP during the tissue maceration in liquid nitrogen. The results showed the efficiency and reliability of the modified method compared to the unmodified method, indicating that combination of lyophilization and PVP improve the quality and amount of the DNA extracted from strawberry leaves.

A simplified universal genomic DNA extraction protocol suitable for PCR

Conventional genomic DNA extraction protocols need expensive and hazardous reagents for decontamination of phenolic compounds from the extracts and are only suited for certain types of tissue. We developed a simple, time-saving and cost-efficient method for genomic DNA extraction from various types of organisms, using relatively innocuous reagents. The protocol employs a single purification step to remove contaminating compounds, using a silica column and a non-hazardous buffer, and a chaotropic-detergent lysing solution that hydrolyzes RNA and allows the selective precipitation of DNA from cell lysates. We used this system to extract genomic DNA from different tissues of various organisms, including algae (Dunaliella salina), human peripheral blood, mouse liver, Escherichia coli, and Chinese hamster ovary cells. Mean DNA yields were 20-30 μg/cm(3) from fresh tissues (comparable to yields given by commercial extraction kits), and the 260/280 nm absorbance ratio was 1.8-2.0, demonstrating a good degree of purity. The extracted DNA was successfully used in PCR, restriction enzyme digestion and for recombinant selection studies.

Molecular identification of Taenia specimens after long-term preservation in formalin

The majority of Taenia tapeworm specimens in the museum collections are usually kept in a formalin fixative for permanent preservation mainly for use in morphological examinations. This study aims to improve Taenia tapeworm identification even of one preserved in formalin for a maximum of 81 years. Taenia tapeworms were collected by the parasite collection unit of the Swiss Natural History Museum and from units in Indonesia, Japan and Korea. A small amount of formalin-fixed tissue (100 mg) was crushed in liquid nitrogen and then soaked in a Tris–EDTA buffer for 3–5 h. The sample was then digested in SDS and proteinase K (20 mg/ml) for 3–5 h at 56 °C. After the addition of proteinase K (20 mg/ml), SDS and hexadecyl-trimethyl-ammonium bromide (CTAB), incubation was continued for another 3 h at 65 °C. A maximum yield of genomic DNA was obtained from this additional step and the quality of genomic DNA obtained with this extraction method seemed to be independent of the duration of storage time in the formalin fixative. The molecular identification of Taenia tapeworms was performed by using PCR and DNA sequences corresponding to position 80–428 of cox1 gene. T. asiatica was detected in the isolates of Indonesia, Japan and Korea. Improvements in the genomic DNA extraction method from formalin fixed museum collections will help in the molecular identification of parasites.

An improved method for genomic DNA extraction from cyanobacteria

We present an improved method for genomic DNA extraction from cyanobacteria by updating the earlier method from our group (Sinha et al. 2001) that does not require lysozyme treatment or sonication to lyse the cells. This method use lysis buffer to lyse the cells and also skips the initial treatments to remove the exopolysaccharides or to break the clumps. To test the efficacy of the method DNA was extracted from the freshwater cyanobacteria Anabaena variabilis PCC 7937, Anabaena sp. PCC 7120, Synechocystis sp. PCC 6803, Synechococcus sp. PCC 6301 and Rivularia sp. HKAR-4 (Accession number: FJ939128). The spectrophotometric and gel electrophoresis analysis revealed high yield and high quality of genomic DNA extracted by this method. Furthermore, the RAPD resulted in the amplification of unidentified genomic regions of various lengths; however, rDNA amplification gave only one band of 1.5 kb in all studied cyanobacteria. Thymine dimer detection study revealed that thymine dimers are induced only by UV-B radiation in A. variabilis PCC 7937 and there is no effect of PAR and UV-A on its genome. Collectively, all these findings put forward the applicability of this method in different studies and purposes.

Genomic DNA extraction from hair sacs of pigs using modified phe-nol-chloroform method

In referring to various methods for genomic DNA extraction from different tissues, we modified the classical phenol-chloroform procedure and reaction system for use in genomic DNA extraction from pig hair sacs. With the modified the phenol-chloroform method we successfully obtained high quality genomic DNA from pig hair sacs. Genomic DNA can be extracted from sacs of one to six pig hairs with satisfied quantity and quality for the need of PCR-based molecular ex-periment.

A simplified arthropod genomic-DNA extraction protocol for polymerase chain reaction (PCR)-based specimen identification through barcoding

Genomic DNA extraction protocols generally require the use of expensive and hazardous reagents necessary for decontamination of phenolic compounds from the extracts. In addition, they are lengthy, hindering large-scale sample extractions necessary for high-throughput analyses. Here we describe a simple, time and cost-efficient method for genomic DNA extraction from insects. The extracted DNA was successfully used in a Polymerase Chain Reaction (PCR), making it suitable for automation for large-scale genetic analysis and barcoding studies. The protocol employs a single purification step to remove polysaccharides and other contaminating compounds using a non-hazardous reagent buffer. In addition, we conducted a bioinformatics database analysis as proof of concept for the efficiency of the DNA extraction protocol by using universal barcoding primers specific for cytochrome c oxidase I gene to identify different arthropod specimens through Barcode of Life Database (BOLD) database search. The usefulness of this protocol in various molecular biology and biodiversity studies is further discussed.

A simple method for purification of genomic DNA from whole blood using Fe 3O 4/Au composite particles as a carrier

Objective To establish a method of genomic DNA extraction from whole blood using Fe 3O 4/Au composite particles as a carrier. Methods Two crucial conditions (sodium chloride concentration and amount of the magnetic particles) were optimized and 8 different human whole blood samples were used to purify genomic DNA under the optimal condition. Then agarose gel electrophoresis and polymerase chain reaction (PCR) were performed. Results The optimal binding condition was 1.5 mol/L NaCl/10% PEG, and the optimal amount of Fe 3O 4/Au composite particles was 600 μg. The yields of the genomic DNA from 100 μl of different whole blood samples were 2-5 μg, and the ratio of A 260/A 280 was in the range of 1.70-1.90. The size of genomic DNA was about 23 kb and the PCR was valid. Conclusion The purification system using Fe 3O 4/Au composite microparticles has advantages in high yield, high purity, ease of operating, time saving and avoiding centrifugation. The purified sample was found to function satisfactorily in PCR amplification.

DNA extraction procedures meaningfully influence qPCR-based mtDNA copy number determination

Quantitative real time PCR (qPCR) is commonly used to determine cell mitochondrial DNA (mtDNA) copy number. This technique involves obtaining the ratio of an unknown variable (number of copies of an mtDNA gene) to a known parameter (number of copies of a nuclear DNA gene) within a genomic DNA sample. We considered the possibility that mtDNA:nuclear DNA (nDNA) ratio determinations could vary depending on the method of genomic DNA extraction used, and that these differences could substantively impact mtDNA copy number determination via qPCR. To test this we measured mtDNA:nDNA ratios in genomic DNA samples prepared using organic solvent (phenol–chloroform–isoamyl alcohol) extraction and two different silica-based column methods, and found mtDNA:nDNA ratio estimates were not uniform. We further evaluated whether different genomic DNA preparation methods could influence outcomes of experiments that use mtDNA:nDNA ratios as endpoints, and found the method of genomic DNA extraction can indeed alter experimental outcomes. We conclude genomic DNA sample preparation can meaningfully influence mtDNA copy number determination by qPCR.

Application of an inexpensive and high‐throughput genomic DNA extraction method for the molecular ecology of zooplanktonic diapausing eggs

We describe the application of a simple, low‐cost, and effective method of DNA extraction (hot sodium hydroxide and Tris, HotSHOT) to the diapausing propagules of continental aquatic invertebrates for its use in PCR amplification. We illustrate the use of the technique in cladocerans, rotifers, anostracans, notostracans, and copepod diapausing eggs. We compare the performance of the HotSHOT technique to the currently most widely used method for DNA extraction of zooplankton eggs and individuals, the chelating resin (or Chelex) technique. The HotSHOT technique overcomes several of the problems posed by Chelex and permits easy optimization for its use with 96‐well plates for high‐throughput DNA extraction and subsequent genetic characterization. We foresee a wide use of this technique in the future from DNA barcoding of diapausing stages to the genetic characterization of the diapausing egg banks of continental aquatic invertebrates.

Identification of an Isolate of Pseudomonas aeroginosa Deposited in PTCC as a PHA Producer Strain: Comparison of Three Different Bacterial Genomic DNA Extraction Methods

Identification of an Isolate of Pseudomonas aeroginosa Deposited in PTCC as a PHA Producer Strain: Comparison of Three Different Bacterial Genomic DNA Extraction Methods

Detection of Bκ-casein variant (CSN3*B) in Burlina dairy cattle by PCR-TTGE

The aim of this study was to develop and optimize a PCR-TTGE method for the de- tection of B κ-casein variant (CSN3*B), which is known to play a major role in cheese technology. The effects of the different κ-casein alleles on the quality and the quantity of cow's milk have been widely reported and the availability of accurate and reliable protocols for the identification of the most common alleles is of great interest in breeding projects. In the present study a new genomic DNA extraction method from milk samples and a PCR-TTGE protocol to quickly identify A and B κ-casein allelic variants were developed. The DNA extraction method was fast and suitable for DNA amplification, while TTGE proved to be a powerful technique for discrimination of A and B alleles. This method was applied to 197 milk samples derived from Burlina, an Italian dairy cattle breed. CSN3*B allele frequency as detected by PCR-TTGE was 0.368. The development of this PCR-TTGE protocol could be used for future breeding programs to improve milk coagulation ability traits. κ-casein / milk / PCR-TTGE / dairy cattle / Burlina breed