Method For Synthesis Research Articles

In silico Evaluation of NO-Sartans against SARS-CoV-2.

Numerous clinical trials are currently investigating the potential of nitric oxide (NO) as an antiviral agent against coronaviruses, including SARS-CoV-2. Additionally, some researchers have reported positive effects of certain Sartans against SARS-CoV-2. Considering the impact of NO-Sartans on the cardiovascular system, we have compiled information on the general structure, synthesis methods, and biological studies of synthesized NOSartans. In silico evaluation of all NO-Sartans and approved sartans against three key SARS-CoV- -2 targets, namely Mpro (PDB ID: 6LU7), NSP16 (PDB ID: 6WKQ), and ACE-2 (PDB ID: 1R4L), was performed using MOE. Almost all NO-Sartans and approved sartans demonstrated promising results in inhibiting these SARS-CoV-2 targets. Compound 36 (CLC-1280) showed the best docking scores against the three evaluated targets and was further evaluated using molecular dynamics (MD) simulations. Based on our in silico studies, CLC-1280 (a Valsartan dinitrate) has the potential to be considered as an inhibitor of the SARS-CoV-2 virus. However, further in vitro and in vivo evaluations are necessary for the drug development process.

Skutterudites as sustainable thermoelectric material- A critical review

In this article, we comprehensively reviewed the thermoelectric proper- ties of skutterudites-based materials. We discussed the various synthesis methods like non-chemical and chemical methods for the synthesis of the skutterudites materials for thermoelectric applications. In particular, this review articles also consolidates the information on how the filler plays a crucial role in improving the thermoelectric performance of the skutterudites materials. In addition, this review also concentrates on diverse fabrication methods employed in the production of skutterudites to optimize their thermoelectric performance. It also elucidates the efficiency of devices based on skutterudite materials and discusses the applications of thermoelectric devices.

Chemistry, Analysis, and Biological Aspects of Daprodustat, A New Hypoxia Inducible Factor Prolyl Hydroxylase Inhibitor: A Comprehensive Review.

The National Health and Nutrition Examination Survey (NHANES) carried out a survey between 2007-10 and found that as compared to the general population, the prevalence of anemia in chronic kidney disease (CKD) patients was twice high. Daprodustat is an investigational novel drug for the treatment of renal anemia. The objective of this study is to provide a comprehensive review of chemistry, synthesis, pharmacology, pharmacokinetic, and bioanalytical methods for the analysis of Daprodustat. To improve understanding, a review was carried out by creating a database of relevant prior research from electronic sources such as ScienceDirect and PubMed. The methodology is shown in the flowchart of the literature selection process. The drug was approved in 2020 for therapeutic purposes in Japan. It is a novel drug approved for the treatment of anemia in chronic kidney disease for oral administration. It is intended for adults who have undergone dialysis for a minimum of four months and are experiencing anemia as a result of chronic kidney disease. This review examines therapeutic, pharmacological, and analytical aspects related to the novel drug Daprodustat.

A Novel Fully-Connected Beamforming Network Architecture With the QR Factorization Synthesis Method

A Novel Fully-Connected Beamforming Network Architecture With the QR Factorization Synthesis Method

Deep eutectic supramolecular polymers based HPLC stationary phase: Green synthesis strategy and promising application prospects

BackgroundDeep eutectic solvents (DESs) have been widely and significantly applied in various fields due to their outstanding features such as low cost, easy preparation and good biodegradability. As novel derivatives of DESs, deep eutectic supramolecular polymers (DESPs) combine the macroscopic state of DESs with the covalent interactions of supramolecular polymers, which also possess the properties of DESs as multifunctional materials. Therefore, DESPs are believed to be promising candidates for separation science. However, there are no studies on the application of DESPs as stationary phases for HPLC analysis. ResultsIn this work, a novel DESP based HPLC stationary phase (Poly(DES)@SiO2) was developed for the first time through a green synthesis method by using DES as the polymerization monomer as well as the reaction medium. The results manifest that this novel Poly(DES)@SiO2 column can well interact with analytes through various mechanisms, and realize selective separation of a wide range of structurally similar hydrophilic/hydrophobic substances. More importantly, the separation of hydrophobic analytes on the Poly(DES)@SiO2 column is less time-consuming with fewer organic eluent, although the column efficiency is slightly lower than that of commercial C18 column. Furthermore, the Poly(DES)@SiO2 column exhibits excellent mechanical stability and satisfactory separation repeatability for steroid hormones. Therefore, a reliable method was established for detecting steroid hormones in actual samples with the recoveries ranging from 94.56 % to 103.84 %, which can meet the detection needs of commonly seen steroid hormones in food and the environment. SignificanceIn summary, this work provides some valuable theoretical references for the synthesis of new DESP based stationary phases through a green and facile strategy, and meanwhile, verifies the feasibility of DESP for effective HPLC separations. In addition, the promising application prospect of DESP based stationary phases in the analysis of complex samples has also been demonstrated, expanding the potential application of DES in separation science.

The effect of different vulcanization reagents on the synthesis of NiFeS and the performance test of seawater electrolysis

Hydrogen energy, as the most promising new energy for sustainable development, has aroused wide concern of researcher in the field of energy chemical industry. Among the many hydrogen generation approaches, electric water splitting for producing H2 is considered to be a simple and environmentally friendly method. Transition metal-based catalysts have become an important field in alkaline seawater electrolysis due to their high abundance and superior catalytic performance. Therefore, NiFeS (Ni3S2@FeS) was in-situ generated on nickel foam through a simple two-step hydrothermal approach in this paper. NiFeS/NF catalysts synthesized by three vulcanization reagents (Na2S·9H2O, CH3CSNH2, CH4N2S) were characterized and compared by a series of electrochemical tests. It is worth noting that for the first time, different vulcanization reagents were used to explore the activity of the same catalyst in seawater splitting and urea splitting. It was found that the NiFeS catalyst synthesized by Na2S·9H2O (Ni3S2@FeS-1/NF) had better oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) performance and good stability in alkaline seawater. The overpotential required for the OER with Ni3S2@FeS-1/NF electrode in alkaline seawater (1 M KOH + seawater electrolyte) is 290 mV at the 10 mA cm-2, and 92 mV for the hydrogen evolution reaction at the 10 mA cm-2. It is found that the NiFeS catalyst obtained by vulcanization of NiFe-LDH not only has high activity and conductivity, but also can effectively inhibit Cl- corrosion. Ni3S2@FeS-1/NF catalyst has a unique cluster rosette nanosheet array structure, which can present more catalytic reaction centres, accelerate the electron transfer rate and promote electrochemistry performance. The work proposes a novel way to explore the effect of different synthesis methods of the same composition on the performance of electrolytic seawater.

Solid-state preparation of in-situ grown graphene-embedded bi-metallic NiMnS hybrids for high-performance asymmetric supercapacitor

Endowed with intrinsic redox-rich features and superior electronic conductivities, mixed-metallic sulphides offer high prospects in electrochemical charge storage, especially in supercapacitors. Hence, their rational design and scalable preparation are of great scientific significance. Herein, we report the in-situ growth of nanostructured hybrids of NiMnS directly embedded into graphene sheets by a straightforward, scalable solid-state synthesis method. In this environment-friendly approach, the metal precursors, elemental sulphur, and graphene oxide (GO) are homogeneously mixed under ball-milling, followed by controlled thermal treatment. Incited from their unique synergistic contribution, the resulting NiMnS/G hybrids exhibit impressive electrochemical performance as a battery-type electrode in an aqueous electrolyte. The NiMnS/G hybrid electrode displayed a high specific capacity of 871.7C g−1 at 2 A g−1 with superior rate capability. Moreover, the asymmetric supercapacitor (ASC) device assembled based on the surface-enhanced NiMnS/G nanohybrid as the positive electrode and activated carbon (AC) as the negative electrode achieves an intriguing performance, delivering a maximum energy density of 53.4 Wh kg−1 at a power density of 500 W kg−1. The ASCs were successfully cycled over 10,000 cycles with 87 % capacitance retention and around 99 % Coulombic efficiency. This simple yet scalable strategy holds high promise and may pave the way for preparing other multimetallic sulphide-based hybrid electrode materials for electrochemical energy storage applications.

Ionic Liquid-Based Green Solvents for Extraction and Purification of Natural Plant Products

Introduction: This research paper explores the environmental sustainability of ionic liquid-based green solvents in the extraction and purification of natural plant products, with a focus on their entire life cycle. The objectives of the study were to assess the environmental impact of ionic liquid synthesis, energy consumption, water usage, emissions, recycling rates, policy effects, and stakeholder perceptions. Methods: Methodologically, we conducted a comprehensive Life Cycle Assessment (LCA) that involved primary data collection through field surveys and interviews with key stakeholders in the ionic liquid production and usage industry across various regions in India. The data were analyzed using specialized LCA software tools to quantify environmental impacts. Key findings include the identification of synthesis as a major contributor to environmental impact, emphasizing the need for greener synthesis methods. Results: The study revealed the significant carbon footprint, energy consumption, and water usage during production, highlighting opportunities for improvement. Emissions data underscored the importance of emission control measures, particularly for greenhouse gases and volatile organic compounds. Recycling and reuse were identified as environmentally friendly disposal methods. Policy compliance varied among stakeholders, indicating room for stricter regulations. Stakeholder perceptions varied, with researchers having the most positive outlook. Implications of the findings extend to sustainable chemistry practices, emphasizing interdisciplinary collaboration and the importance of considering the entire life cycle of chemical processes. Conclusion: This research contributes to a deeper understanding of green solvents and provides a foundation for promoting sustainable practices in industrial processes in India and globally.

Investigation of Antioxidant and Anti-inflammatory Properties of Berberine Nanomicelles: In vitro and In vivo Studies.

In the present study, neuroprotective effects of berberine (BBR) and berberine nanomicelle (BBR-NM) against lipopolysaccharides (LPS)-induced stress oxidative were investigated, and compared by evaluating their antioxidant and anti-inflammatory activities in PC12 cells, and rat brains. A fast, green, and simple synthesis method was used to prepare BBR-NMs. The prepared BBR-NMs were then characterized using dynamic light scattering (DLS), transmission electron microscopy (TEM), and scanning electron microscopy (SEM). In vitro experiments were carried out on the LPS-treated PC12 cell lines to investigate the anti-cytotoxic and antioxidant properties of BBR-NM and BBR. The results showed that BBR-NMs with a diameter of ~100 nm had higher protective effects against ROS production and cytotoxicity induced by LPS in PC12 cells in comparison with free BBR. Moreover, in vivo experiments indicated that the activity levels of antioxidant enzymes, such as superoxide dismutase (SOD), catalase (CAT), and glutathione peroxidase (GPx), increased in the brain of LPS-treated rats administrated with BBR-NM at the optimum dose of 100 mg.kg-1. BBR-NM administration also resulted in decreased concentration of lipid peroxidation (MDA) and pro-inflammatory cytokines, such as Serum interleukin-1 beta (IL-1β) and tumor necrosis factor-alpha (TNF-α). Overall, BBR-NM demonstrated higher neuroprotective effects than free BBR, making it a promising treatment for improving many diseases caused by oxidative stress and inflammation.

Synthesis, Antimicrobial and Antioxidant Activity of Some New Pyrazolines Containing Azo Linkages.

Pyrazolines and azo-pyrazolines are influential groups of heterocyclic compounds with two nitrogen atoms inside the five-membered ring. They play an important role in a wide range of biological processes, such as antifungal, antioxidant, antimalarial and other antimicrobial activities. The main objective of this study is to synthesize some new heterocyclic compounds with antioxidant and antimicrobial activity Methods: One-pot three components and traditional synthesis of new azo-pyrazoline compounds were achieved in this work. The preparation process has been started by diazotizing 4-(6-methylbenzothiazol-2-yl) benzamine and its coupling reaction with 4-hydroxy acetophenone producing azo-acetophenone, followed by benzylation with benzyl chloride to form the starting material, azo-benzyloxy acetophenone. A series of substituted benzaldehydes were reacted with the latter compound via one pot and classical methods, forming new chalcones containing azo linkages and benzyloxy moieties, which were then converted into new target azo-pyrazoline derivatives. The structures of the synthesized compounds were confirmed by spectroscopic techniques using FT-IR, 1H-NMR, 13C-NMR, and 13C- DEPT- 135 spectra. Finally, the synthesized compounds were screened for their antioxidant and antimicrobial activities against Staphylococcus aureus and Escherichia coli. Overall, the one-pot three-component synthesis of pyrazoline compounds generally provides advantages in terms of efficiency, simplicity, and time-consumption compared to classical synthesis methods. Hence, the study advocates the one-pot method because it eliminates the tedious process of making chalcones, which takes time, materials, and unnecessary effort. Therefore, this is the most convenient and effective approach to green chemistry.

Galla chinensis residue-derived carbon dots for sensitive detection of doxorubicin hydrochloride and cell imaging

As an antibiotic, the imbalance of the concentration of doxycycline hydrochloride (DOX) can cause many harms, so real-time detection of the DOX content is crucial. In this study, Galla chinensis residue (GCR) was used as a carbon source, m-phenylenediamine was used as an N-doping agent, and blue-green fluorescent carbon dots (N-GCRCDs) were prepared by a simple hydrothermal synthesis method, with a high quantum yield of 27.31 %. Under optimized conditions, a specific fluorescent probe was established to detect DOX. The addition of DOX resulted in a significant decrease in fluorescence intensity, with a detection range of 5.7–114.9 μM and the detection limit was 1.38 μM. Finally, the feasibility of this method was validated in human urine and the experimental results exhibited a DOX recovery rate of 97.45–104.41 % and an RSD of 0.91–2.64 %. The quenching mechanism was mainly attributed to the inner filter effect and static quenching. Furthermore, the potential application of N-GCRCDs in cells was studied and biocompatibility was evaluated using HepG2 cells, which showed low toxicity at concentrations of 0–50 μg/mL and successful application for HepG2 cell imaging. This study provides reference for resource utilization of GCR and quantitative detection of antibiotics.

Single layered Ag/NiO plasmonic nanocoatings: A new green synthesis method for selective solar absorber

This study presents the synthesis of environmentally benign, single-layered spectrally selective Ag/NiO nanocoating absorbers using a green synthesis method. Various characterization techniques, including Rutherford backscattering spectroscopy (RBS), X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and atomic force microscopy (AFM), were used to examine the effects of plasmonic Ag concentration on the structural, chemical composition, and surface morphology of the nanocomposites. The optical properties of the deposited nanocoatings were investigated using a UV–Vis-NIR spectrophotometer in the solar spectrum region (300–2500 nm) and an FT-IR spectrophotometer in the infrared wavelength region (3000–20,000 nm). XRD results confirmed the coexistence of a face-centered cubic phase of Ag and NiO in the Ag/NiO nanocermet thin films. SEM and TEM topography revealed uniformly distributed nanosphere NiO thin films and cubic Ag metal with better dispersibility and crystallization. The RBS spectrum of the samples showed a homogeneous distribution of Ni, Ag, and O atoms throughout the coatings. Ag/NiO nanocoatings deposited with 8 wt% Ag content exhibited excellent solar absorptance (α) = 0.95 and thermal emittance of (ɛ) of 0.08. This enhancement is primarily attributed to the localized surface plasmon resonance (LSPR) effect associated with the embedded Ag nanoparticles, which facilitates more effective utilization of light.

Neuroplasticity Alterations Induced by Isotretinoin use in RARA Gene Polymorphism is Associated with Increased Risk of Depression and Suicidal Ideation in Patients with Vitamin D Deficiency: A Systematic Review and Meta-Analysis

Rationale: Isotretinoin is widely used for severe acne treatment, but concerns have emerged regarding its potential association with depression and suicidal ideation. Previous studies have produced mixed findings, necessitating a comprehensive evaluation of the evidence. This systematic review and meta-analysis aim to clarify the association between isotretinoin use and the onset of depression or suicidal ideation, focusing on genetic predispositions, particularly in patients with vitamin D deficiency. Objectives: This review assesses the risk of depression and suicidal ideation in patients treated with isotretinoin for severe acne compared to those not using isotretinoin. A secondary focus is placed on identifying specific genetic factors, such as polymorphisms in the RARA and LEP genes, that may predispose patients to these psychiatric side effects. Eligibility Criteria: Randomized controlled trials (RCTs), cohort studies, and case-control studies comparing isotretinoin users to non-users were included. Exclusion criteria included studies that lacked a comparator group or did not report psychiatric outcomes (depression or suicidal ideation). Outcomes: The primary outcome was the incidence of depression or suicidal ideation among isotretinoin users compared to non-users. Secondary outcomes examined the influence of genetic polymorphisms, specifically in the RARA and LEP genes, on the risk of developing psychiatric side effects. Risk of Bias: Risk of bias was assessed using the Cochrane Risk of Bias tool for randomized trials and the Newcastle-Ottawa Scale for observational studies. The overall quality of the included studies was moderate to high. Synthesis Methods: A random-effects meta-analysis was performed to pool odds ratios (ORs) with 95% confidence intervals (CIs). Heterogeneity was assessed using the I² statistic, and sensitivity analyses were conducted to ensure the robustness of the findings. Included Studies: Fifteen studies were included, comprising 3 randomized controlled trials, 7 cohort studies, and 5 case-control studies, with a total of 8,000 isotretinoin users and 10,000 non-users. The studies were conducted in diverse clinical settings with a follow-up range of 6 months to 5 years. Synthesis of Results: The pooled analysis demonstrated a significant association between isotretinoin use and an increased risk of depression (OR: 1.3, 95% CI: 1.1–1.5, p < 0.05). Specific genetic polymorphisms, particularly in the RARA and LEP genes, were identified as potential risk factors for developing depression among isotretinoin users, particularly in patients with concurrent vitamin D deficiency. Conclusions: Isotretinoin use is associated with an increased risk of depression, particularly in individuals with specific genetic polymorphisms such as RARA and LEP. Clinicians should consider conduct precision medicine genetic testing testing for these polymorphisms before initiating isotretinoin treatment and closely monitor patients for psychiatric alterations, mood changes, especially those with with vitamin D deficiency or genetic predisposition to depression

Performance Evaluation of Desalination Battery Systems based on Synthesis Method of Carbon Nanotube-Carbon Felt Composite Electrodes

To enhance chlorine ion removal and increase the current charging capacity of a desalination battery system, carbon nanotubes were applied to a carbonaceous electrode. Two types of composite electrodes were fabricated by attaching multiwalled carbon nanotubes (MWCNTs) to a carbon felt (CF) electrode via dip coating (D-CNT@CF) and electrophoresis (E-CNT@CF). These composite electrodes were then tested within a desalination battery system to evaluate their chlorine ion removal efficiency and current charging performance during the charging process. Microflocs of MWCNTs were observed on the surface of D-CNT@CF, whereas a uniform coating of MWCNTs was achieved on the surface of E-CNT@CF. Performance evaluations revealed that chlorine ion removal rates improved by 3.5% for D-CNT@CF and by 19.4% for E-CNT@CF compared to that of CF. Furthermore, the time required to reach maximum current charge was 40.0% for D-CNT@CF and E-CNT compared to CF. @CF decreased by 60.0%. These findings suggest that surface modification of carbonaceous electrodes through electrophoresis can result in a more stable coating and improve the performance of desalination battery systems.

Analysing forced migration’s impact on Ukraine’s economic sustainability

Purpose. To characterize consequences of forced migration from Ukraine to European countries, quantifying its impact on economic growth, the number, income of the economically active population, investment and industry of Ukraine, and to develop recommendations for overcoming the negative economic effect of migration. Methodology. The methods of analysis and synthesis, scientific abstraction, statistical analysis, economic and mathematical modeling, and graphical analysis were used. Findings. The article studies the factors that caused forced migration from Ukraine’s to European countries as well as the main differences in migration processes provoked by Russia’s war against Ukraine are substantiated. The economic effects and consequences of its impact on the Ukrainian economy are analyzed. The study is based on statistical data characterizing economic growth (GDP) and the factors that determine it (capital investment, economically active population). On the basis of the Cobb-Douglas production function with neutral scientific and technological progress or Hicks scientific and technological progress and the use of linear regression analysis methods, the relationship between changes in the number of economically active population and economic growth is established. Originality. A forecast of changes in GDP under the influence of forced migration of the economically active population of Ukraine in 2023 is calculated and three main scenarios of GDP dynamics are developed in accordance with these forecasts. Each of them envisages a significant drop in output under the influence of migration. Practical value. The article proposes ways to address the problem of forced migration in Ukraine’s economy and the consequences of its negative impact on sustainable development based on the experience of European countries. Ways to restore industry and attract investments to Ukraine are substantiated.

Substantiation of rational design parameters of a crusher with two movable jaws

Purpose. Design engineering of the mechanism of a two-jaw crusher with a compound motion of the jaws, which ensures a change in the angle of gripping of pieces of material within a very small range. Methodology. In the work, a theoretical study on the fourth-class lever mechanism, as the basis of a two-jaw crusher, was performed using the Mathcad 15 software. The study was performed on a vector representation of the links of the hinged mechanism. The development and analysis of constructive solutions were performed using the Autocad software product, which reduces the risk of errors and increases the quality of the design process. Findings. The paper theoretically determines the rational geometric parameters of the two-jaw crusher with the optimal value of the nip angle, whose crushing chamber is formed by the closed loop circuit of the flat fourth-class lever mechanism and proposes a new constructive solution of the mechanism for adjusting the crusher opening with two movable jaws and the bottom mounting of eccentric nodes. The developed device in the form of separate blocks is made with the possibility of their simple assembly and disassembly, which ensures the rate and quality of replacing lining plates or surfacing restoration of the worn working surface of the jaws. The relative movement of the jaws ensures the crushing of pieces of material with the required crushing coefficient. The geometric parameters were obtained by the method of kinematic synthesis. The geometric parameters of the crushing chamber of the two-jaw crusher were determined theoretically; the dependence was obtained of the change in the nip angle on the height of the movable jaw over a period of movement and the change in the compression stroke, which ensures the force interaction of the working surface of the jaws with the material. Originality. It is proved that the quadrilateral closed circuit of the fourth-class lever mechanism can be used as a crushing chamber of a two-jaw crusher. Two links of a closed circuit operate as jaws which break pieces of material. At the same time, the nip angle can vary within fairly narrow limits, ensuring the optimality of the crushing process. It was established that the considered option of the fourth-class six-link mechanism geometry has only two folds. An algorithm is presented for searching for assemblies with the purpose of identifying those that are closely adjacent. Practical value. The results of the conducted research provide the theoretical background and the algorithm for determining the optimal parameters of a two-jaw crusher which can be used at the stage of designing similar crushers. The developed design solution for adjusting the crusher opening expands the scope of application of double-jaw crushers. The obtained dependences of the change in the angle of inclination and the working surface of the jaw over a period make it possible to develop a rational mode of crushing the material

Modeling of drilling tool vibration in the process of drilling blast wells

Purpose. To determine the characteristic features and model bit vibration during its interaction with rock in the process of drilling technical (blast) wells in open pit mines. Methodology. The following methods were used in the work: analysis of scientific and practical solutions; statistical methods for processing the results of experimental studies; methods of analytical synthesis; computer modeling methods for synthesis and analysis of mathematical models. Findings. The process of interaction between a drill bit and a rock was analyzed. The conditions and causes of vibration of drilling equipment are determined. The spectral analysis of the vibration signal, the formation and analysis of the map of the order of rotation of the rotating parts of the drilling rig during the drilling of technical (blast) wells were performed to identify the bit in the frequency domain of the measured concomitant integrated vibration signal as a source of high-amplitude vibration. The modulated signal measured in the time domain at the specified frequency carries information about the physical and mechanical characteristics of the drilled rock and the state of the bit. The analysis of the experimental studies and modeling of the process of interaction of the bit with the rock allows us to conclude that the obtained statistical indicators of the accompanying vibration signal really adequately characterize the process of well drilling. Originality. A method for determining the characteristics of the interaction of a drill bit with rock in the process of drilling technical (blast) wells based on measuring the parameters of the accompanying vibration signal is proposed. The method differs from the known ones in the fact that in the process of changing the operating mode of the drive of the rotating parts of the drilling rig, an order map is formed over the entire range of its revolutions, the frequency of high-amplitude vibration of the bit is determined, which corresponds to a certain peak order of revolutions, and at this frequency the statistical parameters of changes are measured. Practical value. This approach to the process of drilling wells in open pit mines makes it possible to quickly determine the physical and mechanical characteristics of the drilled rock and adjust the process parameters accordingly to increase its productivity and energy saving.

Silver nanoparticles in medicine and technology: Synthesis, functionality and future prospects

Nanomaterials, particularly nanoparticles (NPs), have emerged as forefront materials of the 21st century due to their unique properties and potential applications. Silver nanoparticles (AgNPs) are among the most attractive inorganic nanomaterials, widely used due to their significant antibacterial properties, broad-spectrum activity, and potential applications across various fields, including health, food storage, textiles, and environmental solutions. AgNPs exhibit a large surface-area-to-volume ratio, enabling enhanced interaction with bacterial cells, making them effective in medical and industrial applications. Despite concerns over their toxicity, AgNP-based products have been approved by multiple regulatory bodies. Nanoparticle synthesis methods are generally divided into physical, chemical, and biological approaches. Although physical and chemical methods are efficient, they involve toxic chemicals and energy-intensive processes. Biosynthesis, particularly plant-based, offers an eco-friendly alternative, reducing the environmental and health risks associated with chemical agents. The review also explores the therapeutic potential of AgNPs in drug delivery systems, especially in topical formulations like nanoemulsions, solid lipid nanoparticles (SLNs), and nanostructured lipid carriers (NLCs). These nanocarriers enhance drug stability, skin penetration, and controlled release, making them ideal for dermal and transdermal delivery. Moreover, the use of AgNPs in dentistry is highlighted for their bactericidal properties, which help prevent infections and implant failure, with the potential for enhancing therapeutic outcomes without common drawbacks like tooth staining. Overall, AgNPs exhibit promising applications in biomedical, pharmaceutical, and dental fields, and their novel functionalities continue to advance the development of nanotechnology-driven solutions.

Recent Advances of Organic-Inorganic Hybrid Fluorescent Hyperbranched Polymer: Synthesis, Performance Regulation Strategies and Applications.

The organic-inorganic hybrid fluorescent hyperbranched polymer, including hyperbranched polysiloxane and hyperbranched polyborate, have attracted much attention due to their excellent optical properties and wide range of applications. Hyperbranched polysiloxane and polyborates, prepared by introducing Si or B elements into organic polymer chains at the molecular level through rational molecular design and novel synthesis methods, exhibit outstanding photophysical properties as an indispensable branch of organic-inorganic hybrid fluorescent materials. Herein, this review highlights the recent research progress on hyperbranched polysiloxanes and hyperbranched polyborates, including strategies for regulating their emission wavelengths, quantum yields, and fluorescence lifetimes, potential emission mechanisms, and various applications. Finally, some challenges and promising future directions in the field of organic-inorganic hybrid fluorescent polymers are summarized.

Solvent-Controlled Divergent Cyclization of 3-Ylideneoxindoles with Ethyl 2-Diazoacetate: Access to Spirocyclopropyl and Spiropyrazolines Oxindoles.

Herein a catalyst-free solvent-controlled method for the divergent synthesis of spirocyclopropyl and spiropyrazoline oxindoles from 3-ylideneoxindoles and ethyl diazoacetate was developed. With ClCH2CH2Cl as the solvent, spirocyclopropyl oxindoles were obtained in moderate to excellent yields, whereas the use of MeOH as solvent afforded spiropyrazoline oxindoles in moderate to good yields. The readily available substrates, simple operation and various product transformations further highlighted the utility of this method.