Filtration Method Research Articles

Fabrication and characterization of bacterial cellulose/carbon nanotube composite conductive film and its impact on the luminance of flexible electroluminescent devices as the bottom electrode

Flexible conductive films (BC/CNTs) were fabricated via a straightforward vacuum filtration method using bacterial cellulose (BC) as the substrate and single-walled carbon nanotubes (SWCNTs) as the conductive filler. The resulting BC/CNTs composite films were characterized for the morphology, structure, thermal properties and electrical conductivity using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TG) and X-ray photoelectron spectroscopy (XPS). The study revealed that, the addition of SWCNTs significantly improved the mechanical properties of films. Among the BC/CNTs composite films, the one with the SWCNTs concentration of 0.36 wt% exhibited the best mechanical properties. Incorporating SWCNTs also enhanced the thermal stability and improved electrical conductivity of the composite films. Notably, higher SWCNTs concentrations led to better thermal stability and lower electrical resistance. Ultimately, these BC/CNTs composite films were successfully employed in flexible electroluminescent devices, demonstrating good luminescence.

Bacteriological quality and physicochemical analysis of the Kalte River at Wolaita Sodo Town, southern Ethiopia

ObjectiveThe current research aimed to investigate the physicochemical and bacteriological quality status of the Kalte River in Wolaita Sodo Town, southern Ethiopia.MethodsA total of 42 water samples were collected using sterile glass bottles from three different river sites: Damota (upstream), Kera (midstream), and Gututo (downstream). All the water samples were examined for the presence of heterotrophic bacteria, total coliform and fecal coliform using direct plate count method and membrane filtration method. Standard methods suggested by American water works association were used to analysis the physicochemical parameters of the water samples.ResultsThe results revealed that the total heterotrophic bacteria, total coliform, and fecal coliform count ranged from 8.9 to 12.6 × 104 cfu/ml, 7.5–11.3 × 102 cfu/ml and 5.7–9.7 × 104 cfu/ml, respectively. The bacterial count results indicated that the river water crossed the WHO-recommended limit of potable water. Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus, Salmonella, and Shigella species were the common bacterial pathogens isolated from river water samples. The results of the physicochemical analysis revealed that some of the parameters Biological Oxygen Demand (BOD), Chemical Oxygen Demand (COD), and turbidity exceeded the maximum permissible limits of WHO and other parameters were below the WHO permissible limits.ConclusionTherefore, the presence of bacterial pathogens, fecal coliform indicators, and some physicochemical parameters of the Kalte River exceeding the recommended limits may expose users of the river water to the risk of infection.

Shaping in the Third Direction: Colloidal Photonic Crystals with Quadratic Surfaces Self-Assembled by Hanging-Drop Method.

High-quality, 3D-shaped, SiO2 colloidal photonic crystals (ellipsoids, hyperboloids, and others) were fabricated by self-assembly. They possess a quadratic surface and are wide-angle-independent, direction-dependent, diffractive reflection crystals. Their size varies between 1 and 5 mm and can be achieved as mechanical-resistant, free-standing, thick (hundreds of ordered layers) objects. High-quality, 3D-shaped, polystyrene inverse-opal photonic superstructures (highly similar to diatom frustules) were synthesized by using an inside infiltration method as wide-angle-independent, reflective diffraction objects. They possess multiple reflection bands given by their special architecture (a torus on the top of an ellipsoid) and by their different sized holes (384 nm and 264 nm). Our hanging-drop self-assembly approach uses setups which deform the shape of an ordinary spherical drop; thus, the colloidal self-assembly takes place on a non-axisymmetric liquid/air interface. The deformed drop surface is a kind of topological interface which changes its shape in time, remaining as a quality template for the self-assembly process. Three-dimensional-shaped colloidal photonic crystals might be used as devices for future spectrophotometers, aspheric or freeform diffracting mirrors, or metasurfaces for experiments regarding space-time curvature analogy.

Fabrication of eco-friendly nanocellulose-chitosan-calcium phosphate ternary nanocomposite for wastewater remediation

Nanocomposites have emerged as promising materials for pollutant removal due to their unique properties. However, conventional synthesis methods often involve toxic solvents or expensive materials. In this study, we present a novel ternary nanocomposite synthesized via a simple, cost-effective vacuum filtration method. The composite consists of calcium phosphate (CaP), biowaste-derived nanocellulose (diameter <50 nm) (NC), and chitosan (CH). The nanocomposite exhibited exceptional pollutant removal capabilities due to the hybrid approach of combining adsorption and size exclusion that widens and accelerates pollutant removal. When tested with synthetic wastewater containing 10 ppm of Ni ions and 10 ppm of Congo red (CR) dye, it achieved impressive removal rates of 98.7% for Ni ions and 100% for CR dye. Moreover, the nanocomposite effectively removed heavy metals such as Cd, Ag, Al, Fe, Hg, Mo, Li, and Se at 100%, and Ba, Be, P, and Zn at 80%, 92%, 87%, and 97%, respectively, from real-world municipal wastewater. Importantly, this green nanocomposite membrane was synthesized without the use of harmful chemicals or complex modifications and operated at a high flux rate of 146 L/m2.h.MPa. Its outstanding performance highlights its potential for sustainable pollutant removal applications.

Flexible self‐supporting organic cathode with interface engineering for high‐performance and wide‐temperature sodium‐ion batteries

AbstractFlexible electrode design with robust structure and good performance is one of the priorities for flexible batteries to power emerging wearable electronics, and organic cathode materials have become contenders for flexible self‐supporting electrodes. However, issues such as easy electrolyte solubility and low intrinsic conductivity contribute to high polarization and rapid capacity decay. Herein, we have designed a flexible self‐supporting cathode based on perylene‐3,4,9,10‐tetracarboxylic dianhydride (PTCDA), interfacial engineering enhanced by polypyrrole (PPy), and carbon nanotubes (CNTs), forming the interconnected and flexible PTCDA/PPy/CNTs using polymerization reaction and vacuum filtration methods, effectively curbing those challenges. When used as the cathode of sodium‐ion batteries, PTCDA/PPy/CNTs exhibit excellent rate capability (105.7 mAh g−1 at 20 C), outstanding cycling stability (79.4% capacity retention at 5 C after 500 cycles), and remarkable wide temperature application capability (86.5 mAh g−1 at −30°C and 115.4 mAh g−1 at 60°C). The sodium storage mechanism was verified to be a reversible oxidation reaction between two Na+ ions and carbonyl groups by density functional theory calculations, in situ infrared Fourier transform infrared spectroscopy, and in situ Raman spectroscopy. Surprisingly, the pouch cells based on PTCDA/PPy/CNTs exhibit good mechanical flexibility in various mechanical states. This work inspires more rational designs of flexible and self‐supporting organic cathodes, promoting the development of high‐performance and wide‐temperature adaptable wearable electronic devices.

Quasi-Solid-State Na-O2 Battery with Composite Polymer Electrolyte.

Na-O2 batteries have emerged as promising candidates due to their high theoretical energy density (1,601 Wh kg-1), the potential for high energy storage efficiency, and the abundance of sodium in the earth's crust. Considering the safety issue, quasi-solid-state composite polymer electrolytes are among the promising solid-state electrolyte candidates. Their higher mechanical toughness provides superior resistance to dendritic penetration compared with traditional liquid electrolytes. The flexibility of the composite polymer electrolyte matrix allows it to conform to various battery configurations and considerably reduces safety concerns related to the combustion risks associated with conventional liquid electrolytes. In this study, we employed poly(ethylene oxide) (PEO) and sodium bis(trifluoromethanesulfonyl)imide (NaTFSI) as the polymer matrix and sodium ion-conducting agent, respectively. We incorporated nanosized NZSP (25 wt %) to create the composite polymer electrolyte membrane. This CPE design facilitates ion conduction pathways through both sodium salt and NZSP. By utilizing a liquid electrolyte infiltration method, we successfully enhanced its ionic conductivity, achieving an ionic conductivity of 10-4 S cm-1 at room temperature.

The antioxidative protection mechanism of the ultra-high temperature radome composite material BNf/SiBN

In the study, a BNf/SiBN composite was fabricated through precursor infiltration and pyrolysis (PIP) method. The oxidation resistance of the composite was investigated at different oxidation temperatures, focusing on the micro-structure evolution, the phase composition and oxidation kinetics of bare fibers versus fibers protected by the matrix under various oxidation states. The result indicates that the BNf/SiBN composite remains stable at 1100 °C in air atmosphere, while the fibers protected by matrix maintain their complete structure even at 1500 °C. Furthermore, we elucidated the oxidation mechanism of SiBN matrix: SiBN matrix undergoes a prior oxidation stage and transforms into amorphous SiO2 and B2O3 at high temperatures to impede the oxygen attachment to fibers while preserving the integrity of internal structure. The emergence of ultra-high temperature resistant BNf/SiBN composite and along with the exploration of oxidation behavior has opened up new approach for advancing radome material development.

Fueling Efficiency in Food &amp; Beverage

Pall Corporation explains why manufacturers should be using sheet-based activated carbon instead of traditional methods of filtration in consumable products

Electrogastrography measurement systems and analysis methods used in clinical practice and research: comprehensive review.

https://www.prisma-statement.org/.

Atomistic understanding of Ti3C2 MXene membrane performance for separation of nitrate ions from aqueous solutions

Water desalination, which is a reliable method for providing drinking water and a suitable solution, as well as the membrane filtration method in wastewater treatment, has increased significantly in recent years. In this research, the separation of nitrite and nitrate ions from aqueous solutions was done using the MXene membrane of the Ti3C2 type using molecular dynamics simulation. In this study, various parameters, such as pore size MXene structure, characteristics of cavities, applied pressure, and flux were investigated. To investigate the removal of toxic pollutants from water, water flux, potential mean force, distribution of water molecules, and density were investigated. The results showed that the amount of penetration through the membrane increased with the increase in pressure. It was observed that by applying pressure to the system, the number of water molecules accumulated in front of the membrane decreases because they quickly pass through the membrane, which indicates the positive effect of increasing pressure on the separation rate of molecules. The permeability of this membrane was several times higher than the existing membranes in the industry. So that Mexene membranes, which consist of at least two layers, can repel ions with 100% success.

High-entropy selenides derived from Prussian blue analogues as electrode materials for sodium-ion batteries

Transition metal selenides (TMS) have received much attention as anode materials for sodium-ion batteries (SIBs) because of their high theoretical capacity and excellent redox reversibility. However, their further development is constrained by the dissolution of transition metal ions and substantial volume changes experienced during cycling. Herein, the high-entropy Prussian blue analogues were selenized by the vapor infiltration method, resulting in the formation of a core–shell structured high-entropy selenides (HESe-6). The core–shell structure with voids and abundant selenium vacancies on the surface effectively mitigates bulk expansion and enhances electronic conductivity. Furthermore, the high-entropy property endows an ultra-stable crystal structure and inhibits the dissolution of metal ions. The ex-situ EIS and in-situ XRD results show that HESe-6 is able to be reversibly transformed into highly conductive ultrafine metal particles upon Na+ embedding, providing more Na+ reactive active sites. In addition, despite the incorporation of up to seven different elements, it exhibits minimal phase transitions during discharge/charge cycles, effectively mitigating stress accumulation. HESe-6 could retain an ultralong-term stability of 765.83 mAh g−1 after 1000 loops even at 1 A g−1. Furthermore, when coupled with the Na3V2(PO4)2O2F cathode, it maintains a satisfactory charge energy density of 303 Wh kg−1 after 300 cycles, which shows promising application prospect in the future.

A simple infiltrometer automated with a user‐friendly pressure datalogger

AbstractWe have constructed a new, simplified constant‐head infiltrometer automated with a self‐contained water level datalogger (HOBO U20L‐01) repurposed to measure changes in gas pressure inside an inverted bottle reservoir. Our field tests of six of these infiltrometers confirmed that recorded changes in gas pressure were strongly correlated with changes in water level in the infiltrometer reservoir (R2 = 0.9998). Further, by using the derived experimental calibration function, we were able to obtain accurate near‐steady‐state infiltration rates. This infiltrometer is cheaper and lighter than current commercially available infiltrometers. It can be easily assembled with materials readily available in most hardware stores, and its user‐friendly datalogger does not require any programming knowledge. This infiltrometer is compatible with various ponding infiltration methods, and its generic design allows for modifications with locally available materials to meet diverse research needs.

Mechanical properties, thermophysical properties, and long-term ablation behaviours of C/C–ZrC– ZrB2– W–Cu composites

Spacecraft thermal protection materials need to survive long-term exposure to oxygen-containing environments at 2400 °C. In this study, a high-density and low-porosity metal-ceramic-modified composite was prepared at a low temperature (1500 °C) in the presence of W and Cu using combined slurry brushing and reactive melt infiltration methods. An investigation of the composite formation mechanism and the effects of W and Cu indicated that W and ZrB2 were formed via dissolution-precipitation and the external diffusion of C and B, respectively. The low reaction temperature and the metallic phases significantly improved the mechanical properties, thermophysical properties, and long-term ablation behaviours of C/C–ZrC–ZrB2–W–Cu. Compared to traditional C/C–ZrC, the flexural strength and fracture toughness of the composite increased by 71.56 % and 90.05 % to 345.95 MPa and 14.52 MPa m1/2, respectively, and the thermal conductivity increased by 174.93 % to 59.11 W/m·K. In addition, W and Cu effectively lowered the surface temperature by nearly 250 °C during 300 s ablation, and the mass and line ablation rates decreased to −0.272 mg/s and −0.247 μm/s, respectively.

Hydrophobic-treated yolk-shell SnS2@CSs Z-scheme confinement reactor for solar-electro-driven hydrogen peroxide production in neutral media

The diffusion and adsorption properties of the O2/H2O corpuscles at active sites play a crucial role in the fast photo-electrocatalytic reaction of hydrogen peroxide (H2O2) production. Herein, SnS2 nanosheets with abundant interfacial boundaries and large specific areas are encapsulated into hollow mesoporous carbon spheres (CSs) with flexibility, producing a yolk-shell SnS2@CSs Z-scheme photocatalyst. The nanoconfined microenvironment of SnS2@CSs could enrich O2/H2O in catalyst cavities, which allows sufficient internal O2 transfer, improving the surface chemistry of catalytic O2 to O2− conversion and increasing reaction kinetics. By shaping the mixture of SnS2@CSs and polytetrafluoroethylene (PTFE) on carbon felt (CF) using the vacuum filtration method, the natural air-breathing gas diffusion photoelectrode (AGPE) was prepared, and it can achieve an accumulated concentration of H2O2 about 12 mM after a 10 h stability test from pure water at natural pH without using electrolyte and sacrificial agents. The H2O2 product is upgraded through one downstream route of conversion of H2O2 to sodium perborate. The improved H2O2 production performance could be ascribed to the combination of the confinement effect of SnS2@CSs and the rich triple phase interfaces with the continuous hydrophobic layer and hydrophilic layer to synergistically modulate the photoelectron catalytic microenvironment, which enhanced the transfer of O2 mass and offered a stronger affinity to oxygen bubbles. The strategy of combining the confined material with the air-breathing gas diffusion electrode equips a wide practical range of applications for the synthesis of high-yield hydrogen peroxide.

An Alternative Microbiological Validation for an Online Water Bioburden Analyzer.

The Mettler-Toledo 7000RMS analyzer is a Bio-Fluorescent Particle Counter (BFPC) used to monitor real-time bioburden results from Purified Water (PW). Validation of the analyzer using 13 microorganisms and a low-intensity, fluorescent, polystyrene bead. During the execution of the validation, a laboratory water system that met Purified Water (PW) quality standards was connected to the 7000RMS, and a syringe pump was used to introduce various concentrations of microorganisms and fluorescent polystyrene beads to the analyzer. Samples were collected and tested via the traditional Membrane Filtration (MF) method and the Colony Forming Unit (CFU) plate count results were compared to the Auto-Fluorescent Unit (AFU) of the 7000RMS analyzer. The validation study was designed to follow the guidance in United States Pharmacopeia (USP) Chapter <1223 > (1), European Pharmacopeia (EP) Chapter 5.1.6 (2), PDA Technical Report 33 (3). Concepts and strategies were adapted from EP Chapter 2.6.12 Microbiological Examination of Non-sterile Products: Microbial Enumeration Tests, EP 10.2 (4), European Pharmacopeia Chapter 2.6.1 Sterility, EP 10.2 (5), USP Chapter <61> Microbiological Examination of Non-sterile Products: Microbial Enumeration Tests (6), USP Chapter <71> Sterility Tests (7), Japanese Pharmacopoeia (JP) General Information Chapter G8 Water: Quality Control of Water for Pharmaceutical Use (8). All pre-determined validation acceptance criteria for Accuracy, Specificity, Precision, Limit of Detection (LOD), Limit of Quantitation (LOQ), Linearity, and Range were met. Further, the 7000RMS demonstrated Performance Equivalence to the MF method per USP <1223> but characteristically lacked correlation to the CFU. This validation approach highlights the superior capabilities of the 7000RMS when compared against the traditional compendial MF testing method for PW.

Aplikasi E-Comerce Produk UMKM menggunakan Metode Filtrasi Kolaboratif berbasis Mobile

Micro, Small, and Medium Enterprises (UMKM) in Tebing Tinggi City, North Sumatra have great potential to encourage local economic growth. However, most UMKM in this city still face obstacles in marketing their products online. This research aims to develop a mobile-based e-commerce application with a collaborative filtration method for local UMKM to increase sales and turnover. The type of research is Research and Development (R&amp;D) using the waterfall model including requirements analysis, system design, implementation, testing, and maintenance. The data analysis used includes a collaborative filtration method to recommend products to users based on the highest rating of all UMKM products on the application. Needs analysis through observation, interviews, and literature study. Design using UML diagrams. The implementation applies collaborative filtration for product recommendations based on user preferences, and functionality testing using black boxes. This research produces an e-commerce application that can provide product recommendations that are relevant and by user preferences based on the highest rating patterns and similar behavior of other users. Apart from that, this application also runs smoothly without any problems after black box testing.

Flexible sandwich structure MXene-Aramid Nanofiber-MXene film for adjusting infrared camouflage and multifunctional application

As the rapid developing in infrared detection technology, infrared camouflage has attracted increasing attention in militarily. The two-dimensional transition metal carbide/nitride (MXene)-based film have been developed in IR stealth due to the low IR emissivity. However, the adjusting thermal camouflage is still a great challenge. In this study, we successfully fabricated a sandwich-structured MXene-ANF-MXene nanocomposite film by the vacuum-assisted filtration process. The composite film displayed remarkable infrared stealth performance of large reduction in radiation temperature. The lowest IR emissivity was 0.21. Additionally, adjusting infrared disguise and temperature modulation of the film were achieved by a stable and reliable Joule heating capability. The resulting composite film also exhibited multifunctionality including an impressively high electromagneticinterference(EMI) shielding efficiency of up to 56.2 dB, excellent mechanical properties, flame retardancy, and hydrophobicity. This work offers a simple avenue for preparing multifunctional sandwich-structured composite film by vacuum-assisted filtration method, demonstrating the great promise of MXene film for multifunctional application.

High-temperature mechanical properties and microstructure of 2.5D C/C–SiC composites applied for the brake disc of high-speed train

This paper uses chemical vapor infiltration method to prepare 2.5D C/C-SiC composites, and conducts various tests to reveal its high-temperature mechanical properties and failure mechanism. The results show that the test temperature significantly affects the mechanical properties. As the test temperature increased from room temperature to 800 °C, the tensile strength of the 2.5D C/C-SiC composite dropped from 127.67 ± 20.87 MPa to 94.74 ± 28.15 MPa, and the performance dropped by 25.79 %. The compressive strength dropped from 326.92±17.37 MPa to 192.31 ± 29.15 MPa, resulting in a performance decrease of 41.18 %. The bending strength dropped from 355.74 ± 40.80 MPa to 235.88 ± 23.52 MPa, and the performance dropped by 33.69 %; the interlaminar shear strength dropped from 9.77 ± 2.79 MPa to 7.80 ± 3.26 MPa, and the performance dropped by 20.16 %. High-temperature oxidation will lead to interface degradation, destroy the composite matrix and carbon fiber structure, change the interface bonding strength, and ultimately lead to a decline in composite performance.

Optimization of Process Parameters and Microscopic Morphology of Multi-Walled Carbon Nanotubes/PEEK Films Using the Vacuum Suction Filtration Method

Multi-walled carbon nanotubes (MWCNTs) are a high-quality interlamination reinforcement material, but the high viscosity of polyetheretherketone (PEEK) prevents good fusion between MWCNTs and PEEK. This study proposes a method to achieve the complete integration of MWCNTs and PEEK through the preparation of a composite film using the vacuum suction filtration (VSF) method and optimizes the process parameters. An orthogonal experiment with three factors (filter paper pore size, ultrasonic dispersion time, and PEEK content) at three levels is designed, and mechanical performance testing and microscopic morphology observation are conducted. The influence of the three factors of filter paper pore size, ultrasonic time, and PEEK content on the elastic modulus and tensile strength of the film is investigated. The results are a filter paper pore size of 0.45 μm, ultrasonic time of 8.3 h, and PEEK content of 336.524 mg. The mechanical performance obtained under the optimal process parameters are an elastic modulus of 2437.5723 MPa and a tensile strength of 46.5196 MPa. This optimal process increases the elastic modulus by 12.3152% while maintaining a high tensile strength.

Using environmental DNA to elucidate range expansion of bigheaded carp in two Missouri River tributaries in eastern South Dakota

AbstractObjectiveWe used environmental DNA (eDNA) sampling methods to determine the possibility of Bighead Carp Hypophthalmichthys nobilis and Silver Carp H. molitrix (hereafter, bigheaded carp) range expansion above barriers to fish movement in two tributaries of the Missouri River in eastern South Dakota.MethodsWe collected water samples above and below two perceived barriers to fish movement: a natural chain of waterfalls in the Big Sioux River and a spillway at the downstream end of a man‐made reservoir in the Vermillion River. We used filtration methods to collect bigheaded carp eDNA from water samples and implemented real‐time quantitative polymerase chain reaction techniques to quantify the amount of eDNA in each sample. A total of 198 water samples and 35 field blanks were collected over 2 years (2021 and 2022).ResultWe detected bigheaded carp eDNA below both barriers in 2021 and 2022 and above the barrier in the Vermillion River during 2022. The median posterior prediction value for detecting eDNA below both barriers was 75.3% (95% credible interval [CrI] = 73.2–77.2%) for Bighead Carp eDNA and 54.2% (95% CrI = 51.5–56.4%) for Silver Carp eDNA. The probability of detecting eDNA above the barriers was significantly smaller: 1% (95% CrI = 0.01–1.10%) in the Big Sioux River and 1% (95% CrI = 0.01–1.30%) in the Vermillion River.ConclusionThe detection of positive samples above the spillway barrier in the Vermillion River provides the first evidence that bigheaded carp may have expanded their range to habitats upstream of their documented range in eastern South Dakota.