Field Method Research Articles

Incremental Cost Benefit Ratio (ICBR) of Poly House and Open Field Conditions in Cabbage (Brassica oleracea var. capitata) after Chemical Intervention

This study evaluates the Incremental Cost Benefit Ratio (ICBR) between Poly house and Open field conditions in cabbage cultivation chemical intervention. The research aimed to compare the economic feasibility of adopting poly house technology over traditional open field methods, considering costs and benefits associated with chemical inputs. A comparative cost analysis was conducted to assess production expenses like costs for insecticidal treatments and labor charges. Yield data from both environments were collected to determine output differences and subsequent economic returns. Results indicate that Incremental cost benefit ratio of cabbage heads yields to the cost of treatments in poly house and open field presented as there was a significant superior difference in ICBR ratio of poly house with 1: 0.946 as compared to open field with 1: 0.639 of cabbage heads. The economic analysis revealed that the higher yields and quality achieved in poly house conditions due to less dissipation and undisturbed environmental factors on insecticide applied. Resulting in a favorable incremental Cost benefit ratio compared to open field cultivation.

Spatial and frequency identification of the dynamic properties of thin plates with the Frequency-Adapted Virtual Fields Method

Vibroacoustic inverse methods use the measured response of a vibrating structure to identify a structural parameter or a dynamic load. Two inverse methods are considered, the Force Analysis Technique (FAT) and the Virtual Fields Method (VFM). The Corrected Force Analysis Technique (CFAT) is a variant of FAT that corrects its singularity. This correction allows the method to be applied in the high-frequency domain, when the number of measurement points per flexural wavelength becomes small. In this study, the proposed novelty is the development of a Frequency-Adapted VFM (FA VFM) to the case of a Love–Kirchhoff plate. Thanks to this method, the VFM can now be applied to identify the equivalent bending stiffness and structural damping of a thin plate when the number of measurement points per wavelength is small. The method has previously been developed for an Euler–Bernoulli beam. An experimental identification of the complex bending stiffness of an locally damped aluminium plate using Laser Doppler Velocimetry (LDV) data and the developed method is performed. The experimental study shows for the first time that the FA VFM can be used to map the equivalent bending stiffness and structural damping as a function of position on a plate and identify these parameters as a function of frequency over a large frequency band. The results of the Frequency-Adapted VFM are compared with those of CFAT and the classical VFM approach. FA VFM results are more accurate than those of classical VFM and similar to those of CFAT.

Semiclassical Nonadiabatic Molecular Dynamics Using Linearized Pair-Density Functional Theory.

Nonadiabatic molecular dynamics is an effective method for modeling nonradiative decay in electronically excited molecules. Its accuracy depends strongly on the quality of the potential energy surfaces, and its affordability for long direct-dynamic simulations with adequate ensemble averaging depends strongly on the cost of the required electronic structure calculations. Linearized pair-density functional theory (L-PDFT) is a recently developed post-self-consistent-field multireference method that can model potential energy surfaces with an accuracy similar to expensive multireference perturbation theories but at a computational cost similar to the underlying multiconfiguration self-consistent field method. Here, we integrate the SHARC dynamics and PySCF electronic structure code to utilize L-PDFT for electronically nonadiabatic calculations and use the combined programs to study the photoisomerization reaction of cis-azomethane. We show that L-PDFT is able to successfully simulate the photoisomerization without crashes, and it yields results similar to the more expensive extended multistate complete active space second-order perturbation theory. This shows that L-PDFT can model internal conversion, and it demonstrates its promise for broader photodynamics applications.

Digital image correlation and infrared thermography data for seven unique geometries of 304L stainless steel

Material Testing 2.0 (MT2.0) is a paradigm that advocates for the use of rich, full-field data, such as from digital image correlation and infrared thermography, for material identification. By employing heterogeneous, multi-axial data in conjunction with sophisticated inverse calibration techniques such as finite element model updating and the virtual fields method, MT2.0 aims to reduce the number of specimens needed for material identification and to increase confidence in the calibration results. To support continued development, improvement, and validation of such inverse methods—specifically for rate-dependent, temperature-dependent, and anisotropic metal plasticity models—we provide here a thorough experimental data set for 304L stainless steel sheet metal. The data set includes full-field displacement, strain, and temperature data for seven unique specimen geometries tested at different strain rates and in different material orientations. Commensurate extensometer strain data from tensile dog bones is provided as well for comparison. We believe this complete data set will be a valuable contribution to the experimental and computational mechanics communities, supporting continued advances in material identification methods.

Restricted Open-Shell Cluster Mean-Field theory for Strongly Correlated Systems.

The cluster-based Mean Field method (cMF) and it is second order perturbative correction was introduced by Jiménez-Hoyos and Scuseria to reduce the cost of modeling strongly correlated systems by dividing an active space up into small clusters, which are individually solved in the mean-field presence of each other. In that work, clusters with unpaired electrons are treated by allowing the α and β orbitals to spin polarize. While that provided significant energetic stabilization, the resulting cMF wave function was spin-contaminated, making it difficult to use as a reference state for spin-pure post-cMF methods. In this work, we propose the Restricted Open-shell cMF (RO-cMF) method, extending the cMF approach to systems with open-shell clusters, while not permitting spin-polarization. While the resulting RO-cMF energies are necessarily higher in energy than the unrestricted orbital cMF, the new RO-cMF provides a simple reference state for post-cMF methods that recover the missing intercluster correlations. We provide a detailed explanation of the method, and report demonstrative calculations of exchange coupling constants for three systems: a di-iron complex, a dichromium complex, and a dimerized organic radical. We also report the first perturbatively corrected RO-cMF-PT2 results as well.

Motion capture and AR based programming by demonstration for industrial robots using handheld teaching device

In the industrial robots field, efficient and convenient programming methods have been a hot research topic. In recent years, immersive simulation technology has been developing rapidly in many fields, which provides new horizons for the development of industrial robots. This paper presents a HTC VIVE laser scan motion capture and Holohens augmented reality (AR) based interactive Programming by Demonstration (PbD) system for industrial robot. A portable Handheld Teaching Device (HTD) and its calibration algorithm are designed in the system. The portable HTD which is tracked by a laser motion capture system can be viewed as an AR robot end-effector to teach paths. Meanwhile, the AR robot can be simulated in real time during programing. In addition, the robot reproducing the operator’s actions at the same position in space is the focus of programming. So, Multi-system registration methods are proposed to determine the relationship between robot systems, motion capture systems and virtual robot systems. Meanwhile, a path planning algorithm is proposed to convert the captured raw path points into robot-executable code. For unskilled operators, they can easily perform complex programming using the HTD. For skilled senior workers, their skills can be quickly learned by robots using the system.

Application of fluorescence spectroscopy as a field method in the determination of varietal differences radish (Raphanus sativus) accessions after harvesting

Application of fluorescence spectroscopy as a field method in the determination of varietal differences radish (Raphanus sativus) accessions after harvesting

Methodology for 3D sound synthesis of directional acoustic sources by higher-order ambisonics

This paper presents the 3D sound field synthesis using both the multimodal method and higher-order ambisonics (HOA) of the pressure field radiated by directional acoustic sources. Ambisonics is a technique for encoding and reproducing measured or modeled (virtual) sound pressure field, based on a decomposition of the acoustic field over spherical harmonics. The directional source considered in this work is an acoustic horn excited by a flat piston. The free-field radiation from this horn is first modeled accurately over a wide frequency range using the multimodal method, which requires relatively low computational resources. This radiated pressure field, collected on a dual-layer sphere of virtual sensors distributed over a Lebedev geometry, allows its projection into the ambisonic domain. The pressure field is then synthetized in the laboratory's 3D 5th order HOA spatialization sphere, which consists of fifty-six loudspeakers. This offers the ability of listening to the radiated sound using a higher-order ambisonic synthesis of a 'virtual' source before it is manufactured. To qualitatively evaluate the performance of the proposed procedure, the transfer function of the synthesized horn is measured around the listening point within the spatialization sphere. Key words : 3D sound synthesis, high-order ambisonics, directive sources, waveguides, horn, multimodal method

Study on frequency dependent convolution methods for sound event detection

Sound event detection (SED) aims to classify target sound events from a given audio clip with the corresponding onset and offset time localization. SED, a core research field in machine listening, has been rapidly growing by adopting the methods by applying deep learning methods in image recognition fields. One representative example is 2D convolution which is applied to 2D time-frequency audio features. However, 2D audio data exhibits physical discrepancies from 2D image data, one of which is that frequency dimension of 2D audio data is translational-variant while position dimension of 2D image data is translational-invariant. Therefore, to make 2D convolution more consistent to 2D audio data, we need to make 2D convolution dependent to frequency dimension. Previously, to address this problem, Frequency Dynamic Convolution (FDYConv) was proposed to replaces 2D convolution. FDYConv is dependent on frequency dimensions since it applies different kernels on frequency dimension. While it has proven its outstanding performance on SED, there are several more alternative frequency dependent convolution methods which are yet to be explored, In this work, we propose other simpler frequency dependent convolution methods and compare them with FDYConv in order to further investigate the effect of frequency dependence of 2D convolution methods.

Experimental identification of the bending stiffness and damping of plates using the frequency-adapted virtual fields Method

Inverse vibroacoustic methods can be used to identify the complex bending stiffness of a plate from its vibratory response. This work focuses on the Virtual Fields Method (VFM) and the Force Analysis Technique (FAT). The VFM uses functions called virtual fields to solve the Principle of Virtual Work, a weak form of equilibrium, and identifies complex bending stiffness. Here, the virtual fields are defined as piecewise functions over a surface smaller than the plate (virtual window). FAT uses a finite-difference scheme to discretize the fourth-order spatial derivatives of the displacement in the local equilibrium of the plate and thus estimates the bending stiffness. The application of a finite-difference scheme creates a bias in the identified stiffness, which increases with frequency. The Corrected Force Analysis Technique (CFAT) corrects this bias in the high-frequency domain. In this study, it is proposed to apply the CFAT principles to the VFM to adapt the method, using the virtual window size, so it can be applied it in the high-frequency domain. FAT, CFAT, the VFM and the Frequency-Adapted VFM will be presented. The method was tested on experimental data to identify the complex bending stiffness of an aluminium plate partially covered with a damping material.

Design of N-doped C60-σ-B-doped C60 photodetector based on resonant tunneling diode using DFT and NEGF method.

Photodetectors utilizing donor/acceptor (D/A) molecules have the capacity to detect light through molecular interactions between a donor and an acceptor molecule. These devices leverage electronic or optical changes within molecules when exposed to light, resulting in observable modifications. The unique properties of photodetectors with D/A molecules make them valuable tools in various fields, including molecular electronics. This paper presents the modeling and simulation of a single-molecule photodetector based on a D/A molecule configuration. The acceptor molecule used is N-doped C60 fullerene, while the donor molecule is B-doped C60 fullerene. Initially, simulations were conducted at zero bias voltage to determine the energy and states of the bipartite molecule. Subsequently, the system's Hamiltonian was computed based on these results. The self-consistent field method (SCF) and optical self-energy coefficients were employed for modeling. Finally, the current-voltage curve of the device was derived for various input light frequencies. The simulation and modeling results demonstrated that the device exhibited negative differential resistances at bias voltages of 0.33 V, 1.58 V, and - 0.93 V, depending on the input light frequency. Furthermore, the designed device demonstrated the ability to detect and absorb waves with different frequencies. The number of current peaks in the current-voltage curve varied with by altering the number of optical modes. The computational work was conducted using the software package of Atomistix ToolKit (ATK-2018.06) and MATLAB code. The calculations were based on the density functional theory (DFT) approach and the self-consistent field method, specifically the non-equilibrium Green function (NEGF). The exchange correlation function was investigated using the generalized gradient approximation (GGA) proposed by Perdew, Burke, and Ernzerhof (PBE). For the calculations, we employed the double-ζ plus polarization (DZP) basis set. Initially, the structures of N doped-C60-σ-B-doped-C60 molecule underwent optimization using the DFT approach implemented in the ATK package. This optimization process allowed us to extract the parameters of the molecule. Subsequently, we utilized the NEGF formalism in MATLAB software to model and simulate photodetector based on the optimized molecule. We calculated important features of the photodetector, such as photocurrent, and compared the performance of the photodetector using photons with energies of 2 and 3 eV.

Sound insulation of partially open windows - alternative laboratory measurement methods

Sound insulation with partially open windows has had growing attention in recent years. In Denmark, this is primarily caused by the Danish Environmental Protection Agency's guideline from 2007 "Noise from roads", which introduces noise limits with open windows (opening area of 0.35 m2) for situations with a high traffic noise level. The sound insulation of traditional windows in open position have been measured in both the laboratory and external environment, and for certain setups too different results have been observed. To investigate the reasons behind the discrepancies, the traditionally reverberant source room of laboratory measurements was modified to a semi-anechoic room to remove reflections from unwanted reflections from room surfaces and to imitate the external environment during field measurements. Four different window types were tested as part of the research projects "Optimized measurement method for sound reduction of partially open windows part 1 and 2" (MetÅV and MetÅV2) in collaboration with four Danish window manufacturers. The primary focus of the project is to explore alternative laboratory methods to the traditional diffuse field method by studying reference cases from field measurements and taking into consideration different sound source positions and window geometry. This paper describes the results so far.

General relativistic self-gravitating equilibrium discs around rotating neutron stars

ABSTRACT In modelling a relativistic disc around a compact object, the self-gravity of the disc is often neglected while it needs to be incorporated for more accurate descriptions in several circumstances. Extending the Komatsu–Eriguchi–Hachisu self-consistent field method, we present numerical models of a rapidly rotating neutron star with a self-gravitating disc in stationary equilibrium. In particular, our approach allows us to obtain numerical solutions involving a massive disc with the rest mass $\mathcal {O}(10^{-1})-\mathcal {O}(10^0)\, \mathrm{ M}_\odot$ closely attached to a rotating neutron star, given that the disc is mainly supported by the relativistic electron degeneracy pressure. We also assess the impact of self-gravity on the internal structure of the disc and the neutron star. These axisymmetric, stationary solutions can be employed for simulations involving the neutron star–disc system in the context of high-energy transients and gravitational-wave emissions.

Lattice determination of the Batalin-Vilkovisky function and the strong running interaction

The Batalin-Vilkovisky function is a central component in the modern formulation of the background field method and the physical applications derived from it. In the present work we report on novel lattice results for this particular quantity, obtained by capitalizing on its equality with the Kugo-Ojima function in the Landau gauge. The results of the lattice simulation are in very good agreement with the predictions derived from a continuum analysis based on the corresponding Schwinger-Dyson equations. In addition, we show that an important relation connecting this function with the ghost propagator is fulfilled rather accurately. With the aid of these results, we carry out the first completely lattice-based determination of the process-independent strong running interaction, employed in a variety of phenomenological studies.

Dialectical vernacular complicity: Navigating school choice and neoliberalism at a K-8 charter school in Phoenix, Arizona

ABSTRACT This paper joins past and ongoing conversations about the neoliberalization of public schools, via school choice and charter schools specifically. Using rhetorical field methods, a variety of data was collected over two years at a K-8 charter school in Phoenix, Arizona. Based on the data gathered, I propose dialectical vernacular complicity as a new concept that sheds light on the nuance and complexity of various agents’ (dis)engagements with neoliberalism. After defining the concept, the paper follows with a case study and concludes with reflections on the limits of agency with(in) neoliberalism, public education, and democracy.

Formative processes in nursing intervention in palliative care in internal medicine service patients

The purpose of the research project was to determine the nursing intervention in palliative care in patients of the Internal Medicine service of the Alfredo Noboa Montenegro Hospital during the period October 2023- February 2024, since nursing professionals are exposed to social, health and service changes, whose deficiency or lack of knowledge can limit an integral, personalized and quality intervention that allows care from individuality, flexibility, continuity, accessibility and polyvalence. A descriptive, cross-sectional, bibliographic and field method was applied with a quantitative approach, whose research design was non-experimental and cross-sectional, applying a sample by convenience with a total of 17 nursing professionals working in the internal medicine service, in addition, a survey of 29 questions distributed in four dimensions was used to collect the information; actions, education, psycho-emotional support, spiritual and grief. According to the results, it was possible to demonstrate the deficiencies of nursing professionals, especially in the identification of palliative needs, symptom assessment, intervention processes, use of tools to assess psychoemotional and spiritual needs, pharmacological approach and information on bereavement, which made it necessary to establish a palliative care guide focused on nursing professionals, to be subsequently socialized with all personnel.

Investigation of the sound insulation and natural ventilation performance of a metamaterial-based open window

Recent advancements in metamaterials have created new opportunities to enhance indoor environmental quality (IEQ) by integrating natural ventilation and sound insulation in architectural designs. Metamaterial-based windows can facilitate natural ventilation, contributing to energy savings while also protecting against outdoor noise. However, international standards for assessing façade sound insulation typically assume all partitions are closed, with only the Danish standard DS 447:2021 accounting for partially open conventional windows. These standards do not address simultaneous noise mitigation and natural ventilation. To fill this gap, this study evaluated a prototype metamaterial-based device called the Acoustic Metawindow (AMW) unit using three experimental methods. These methods included the diffuse field method (ISO 10140 series), an adapted directive sound field method (EN 1793-6), and beamforming to control sound leakages from the AMW unit in both closed and open states. Additionally, the study used an adapted ISO 9972 method to assess the ventilation potential alongside sound insulation of the open AMW unit. The findings revealed that the AMW unit significantly outperformed equivalently open windows, achieving a sound level difference (Dn,e) improvement of 5–15 dB in the 500–5000 Hz frequency range, resulting in a total Dn,e,w of 30 dB. The study also indicated a correlation between the frequency range of effective sound insulation and the metamaterial design features of the AMW unit. This research suggests the possibility of a more inclusive standard that considers partially open sound-insulating devices as windows in the built environment, combining noise mitigation and energy saving.

Comparing greenhouse and field biocrust cultivation methods in the Sonoran Desert

Abstract Developing methods to use biocrusts in restoration is becoming more important as land use and climate change impact the health and intactness of high‐stress ecosystems. Methods of cultivation to maximize the production of biocrusts for use in restoration activities are necessary because salvage opportunities are limited. Our objective for this research was to determine an optimal method for scalable biocrust cultivation. We tested two Field and one Greenhouse cultivation methods. The Field cultivation methods had a base layer of weed cloth, soil and irrigation with either (1) shade cloth immediately over the surface (Quesadilla method) or (2) with shade cloth over a 1 m tall hoophouse (Hoophouse method). The Greenhouse method had nested basins with water wicking up to the soil surface and biocrust from below, with shade cloth attached to basins. We crossed these methods with the addition of native soil or sand and with and without a base of jute using salvaged biocrusts from the Sonoran Desert. All methods led to at least doubling biocrust cover in 11 weeks. The Greenhouse method led to the highest cover of cyanobacteria and mosses, whereas the field Quesadilla method and the addition of native soil in all cultivation methods led to higher abundance of lichens. There were interactions of cultivation method and soil type, with Greenhouse cultivation and native soil promoting the highest cyanobacteria cover and chlorophyll a. We measured exopolysaccharide sheaths (EPS) in native soil and all cultivation conditions, finding no differences for tightly bound sheath fractions, but higher quantities of the loosely bound EPS in the Greenhouse. We also quantified native and non‐native plants in cultivation, finding few plants in Greenhouse cultivation, but high abundance in both Field methods, and particularly with native soil and without jute for native plants. Practical implication: Together, these results demonstrate that all three cultivation methods are successful for bulking biocrust materials for restoration, and preference should be given to the method that is the easiest and most accessible for practitioners.

Efficacy, non-target impacts, and costs of mechanical control options against a bioturbator in bivalve aquaculture

Bivalve aquaculture benefits from non-chemical, operational-scale pest management tools to sustain or increase production. Mechanical methods to control a bioturbating pest (burrowing shrimp Neotrypaea californiensis) have been tested in Washington State (USA), providing a roadmap for other regions affected by native or widespread pests. These shrimp smother and bury ground-cultured oysters on tidal flats even when the shrimp are at low densities. Therefore, control methods with high efficacy are required, also considering non-target effects and costs to implement. From 2002 to 2023, 55 mechanical control trials were carried out, plus two shell-addition trials from earlier research. Methods included: 1) surface barriers, 2) shrimp removal, 3) sediment disruption, and 4) physical conditions intended to cause direct mortality (e.g. electricity, heat). Data were compiled through a meta-analysis framework, in which effect size was calculated as the log response ratio of treated relative to reference plots. Most surface barriers were not effective because they were penetrated by shrimp or insufficiently anchored; an exception was application of five inches (12.7 cm) of gravel. Shrimp removal was effective with a water-jet technique developed to collect shrimp for bait at low tide, but efforts to deploy multiple jets with a towed mechanized device were unsuccessful. Sediment disruption through surface compaction was the most common farm-scale approach but insufficiently reduced shrimp densities, whereas consolidating sediment with vibration to 1 m depth had high efficacy but has been applied only in small plots. Effect sizes were not available for any field trials of direct mortality methods, but energy required to kill shrimp was calculated from laboratory studies (1–50 kW-hr m−3 in water, and higher energy required in saturated sediment). Across all field methods, efficacy improved with effort (person-hours per area). Sediment showed reduced penetrability and increased muddiness following treatment. Non-target effects on infauna included both positive and negative effect sizes, consistent with a community change following a reduction in shrimp density. In the six studies measuring epibenthic species, no overall positive response to control of shrimp occurred, even though the reason for control is to protect surface-dwelling species from bioturbation by shrimp. This outcome illustrates the importance of pairing efficacy in terms of reduction of shrimp and improvement of farming. The vertical position of N. californiensis below nearly a meter of water-saturated sediment, along with an innate tolerance to pressure and anoxia, has placed them out of reach of most attempted mechanical methods. Although progress has been made in recent years, mechanical control options remain limited that can be carried out without permits and that economically reduce shrimp to densities compatible with benthic shellfish aquaculture at a farm scale.

Progress in theory and simulations of lattice Boltzmann method for heat transfer enhancement on phase change

As a general phenomenon in science and engineering, phase change has appeared and been applied in many aspects. However, there is a sufficient necessity to enhance the heat transfer in the phase change process due to the low heat transfer efficiency of the phase change material. In order to improve the efficiency of heat transfer during the phase change process, theory and numerical simulations based on computational fluid dynamics, especially the lattice Boltzmann (LB) method, are reviewed. The LB method has become a strong numerical method for heat and mass transfer and fluid dynamics because of its mesoscopic nature and a series of unique merits brought by this nature. In this article, progress in theory and simulations of the LB method for heat transfer enhancement on phase change is reviewed. This review first introduces the basic theories and models of the LB method for flow field and temperature field. Afterward, the development of the LB models for tracing the phase interface is reviewed. The application of the LB method for phase change and investigations of the heat transfer enhancement in the phase change process are also discussed. Finally, future developments in the LB method for phase change problems are prospected.