Method For Purification Of Proteins Research Articles

Automated Hydrophobic Interaction Chromatography Column Selection for Use in Protein Purification

In contrast to other chromatographic methods for purifying proteins (e.g. gel filtration, affinity, and ion exchange), hydrophobic interaction chromatography (HIC) commonly requires experimental determination (referred to as screening or "scouting") in order to select the most suitable chromatographic medium for purifying a given protein (1). The method presented here describes an automated approach to scouting for an optimal HIC media to be used in protein purification. HIC separates proteins and other biomolecules from a crude lysate based on differences in hydrophobicity. Similar to affinity chromatography (AC) and ion exchange chromatography (IEX), HIC is capable of concentrating the protein of interest as it progresses through the chromatographic process. Proteins best suited for purification by HIC include those with hydrophobic surface regions and able to withstand exposure to salt concentrations in excess of 2 M ammonium sulfate ((NH(4;))(2;)SO(4;)). HIC is often chosen as a purification method for proteins lacking an affinity tag, and thus unsuitable for AC, and when IEX fails to provide adequate purification. Hydrophobic moieties on the protein surface temporarily bind to a nonpolar ligand coupled to an inert, immobile matrix. The interaction between protein and ligand are highly dependent on the salt concentration of the buffer flowing through the chromatography column, with high ionic concentrations strengthening the protein-ligand interaction and making the protein immobile (i.e. bound inside the column) (2). As salt concentrations decrease, the protein-ligand interaction dissipates, the protein again becomes mobile and elutes from the column. Several HIC media are commercially available in pre-packed columns, each containing one of several hydrophobic ligands (e.g. S-butyl, butyl, octyl, and phenyl) cross-linked at varying densities to agarose beads of a specific diameter (3). Automated column scouting allows for an efficient approach for determining which HIC media should be employed for future, more exhaustive optimization experiments and protein purification runs (4). The specific protein being purified here is recombinant green fluorescent protein (GFP); however, the approach may be adapted for purifying other proteins with one or more hydrophobic surface regions. GFP serves as a useful model protein, due to its stability, unique light absorbance peak at 397 nm, and fluorescence when exposed to UV light (5). Bacterial lysate containing wild type GFP was prepared in a high-salt buffer, loaded into a Bio-Rad DuoFlow medium pressure liquid chromatography system, and adsorbed to HiTrap HIC columns containing different HIC media. The protein was eluted from the columns and analyzed by in-line and post-run detection methods. Buffer blending, dynamic sample loop injection, sequential column selection, multi-wavelength analysis, and split fraction eluate collection increased the functionality of the system and reproducibility of the experimental approach.

High-throughput protein precipitation and hydrophobic interaction chromatography: Salt effects and thermodynamic interrelation

Salt-induced protein precipitation and hydrophobic interaction chromatography (HIC) are two widely used methods for protein purification. In this study, salt effects in protein precipitation and HIC were investigated for a broad combination of proteins, salts and HIC resins. Interrelation between the critical thermodynamic salting out parameters in both techniques was equally investigated. Protein precipitation data were obtained by a high-throughput technique employing 96-well microtitre plates and robotic liquid handling technology. For the same protein-salt combinations, isocratic HIC experiments were performed using two or three different commercially available stationary phases-Phenyl Sepharose low sub, Butyl Sepharose and Resource Phenyl. In general, similar salt effects and deviations from the lyotropic series were observed in both separation methods, for example, the reverse Hofmeister effect reported for lysozyme below its isoelectric point and at low salt concentrations. The salting out constant could be expressed in terms of the preferential interaction parameter in protein precipitation, showing that the former is, in effect, the net result of preferential interaction of a protein with water molecules and salt ions in its vicinity. However, no general quantitative interrelation was found between salting out parameters or the number of released water molecules in protein precipitation and HIC. In other words, protein solubility and HIC retention factor could not be quantitatively interrelated, although for some proteins, regular trends were observed across the different resins and salt types.

High-throughput protein production and purification at the Seattle Structural Genomics Center for Infectious Disease.

The establishment of an efficient and reliable protein-purification pipeline is essential for the success of structural genomic projects. The SSGCID Protein Purification Group at the University of Washington (UW-PPG) has established a robust protein-purification pipeline designed to purify 400 proteins per year at a rate of eight purifications per week. The pipeline was implemented using two ÄKTAexplorer 100 s and four ÄKTAprimes to perform immobilized metal-affinity chromatography (IMAC) and size-exclusion chromatography. Purifications were completed in a period of 5 d and yielded an average of 53 mg highly purified protein. This paper provides a detailed description of the methods used to purify, characterize and store SSGCID proteins. Some of the purified proteins were treated with 3C protease, which was expressed and purified by UW-PPG using a similar protocol, to cleave non-native six-histidine tags. The cleavage was successful in 94% of 214 attempts. Cleaved proteins yielded 2.9% more structures than uncleaved six-histidine-tagged proteins. This 2.9% improvement may seem small, but over the course of the project the structure output from UW-PPG is thus predicted to increase from 260 structures to 318 structures. Therefore, the outlined protocol with 3C cleavage and subtractive IMAC has been shown to be a highly efficient method for the standardized purification of recombinant proteins for structure determination via X-ray crystallography.

Weak affinity ligands selection using quartz crystal microbalance biosensor: Multi-hydroxyl amine ligands for protein separation

Multi-hydroxyl amines including tris(hydroxymethyl)aminomethane (Tris), serinol and ethanolamine were selected as weak affinity ligands using a rapid screening by quartz crystal microbalance (QCM) biosensor. Based on the specific recognition between the ligands and two proteins, lysozyme (LZM) and cytochrome c (Cyt c), a weak affinity chromatography method was developed for specific separation of the two proteins. The frontal analysis results showed that the apparent dissociation constants ( K D) of ligand–protein complexes were all in the order of weak affinity (10 −4 M). By weak affinity columns modified with the three multi-hydroxyl amines individually, LZM and Cyt c were baseline separated as retarded peaks from non-specific protein and each other in a single cycle of loading and eluting. Moreover, the Tris-modified column typically showed the satisfactory repeatability and stability as a new type of weak affinity columns. The present strategy composed of QCM selecting and affinity chromatography separating was promising to extend the variety of weak affinity ligands and develop inexpensive specific affinity methods for separation and purification of multiple proteins on one single column.

Efficient and inexpensive method for purification of heparin binding proteins

Heparin binding (HB) proteins mediate a wide range of important cellular processes, which makes this class of proteins biopharmaceutically important. Engineering HB proteins may bring many advantages, but it necessitates cost effective and efficient purification methodologies compared to currently available methods. One of the most important classes of HB proteins are fibroblast growth factors (FGFs) and their receptors (FGFRs). In this study, we report an efficient off-column purification of FGF-1 from soluble fractions and purification of the D2 domain of FGFR from insoluble inclusion bodies, using a weak Amberlite cation (IRC) exchanger. FGF-1 and the D2 domain have been expressed in Escherichia coli and purified to homogeneity using IRC resin. This approach is an alternative to conventional affinity column chromatography, which exhibits several disadvantages, including time-consuming experimental procedures for purification and regeneration and results in the expensive production of recombinant proteins. Results of the heparin binding chromatography and steady state fluorescence experiments show that the FGF-1 and the D2 are in a native conformation. The findings of this study will not only aid an in-depth investigation of this class of proteins but will also provide avenues for inexpensive and efficient purification of other important biological macromolecules.

A general method of protein purification for recombinant unstructured non-acidic proteins

Typical late embryogenesis abundant (LEA) proteins accumulate in response to water deficit imposed by the environment or by plant developmental programs. Because of their physicochemical properties, they can be considered as hydrophilins and as a paradigm of intrinsically unstructured proteins (IUPs) in plants. To study their biophysical and biochemical characteristics large quantities of highly purified protein are required. In this work, we report a fast and simple purification method for non-acidic recombinant LEA proteins that does not need the addition of tags and that preserves their in vitro protective activity. The method is based on the enrichment of the protein of interest by boiling the bacterial protein extract, followed by a differential precipitation with trichloroacetic acid (TCA). Using this procedure we have obtained highly pure recombinant LEA proteins of groups 1, 3, and 4 and one recombinant bacterial hydrophilin. This protocol will facilitate the purification of this type of IUPs, and could be particularly useful in proteomic projects/analyses.

Expression of family 3 cellulose-binding module (CBM3) as an affinity tag for recombinant proteins in yeast

Easy and low-cost protein purification methods for the mass production of commonly used enzymes that play important roles in biotechnology are in high demand. In this study, we developed a fast, low-cost recombinant protein purification system in the methylotrophic yeast Pichia pastoris using the family 3 cellulose-binding module (CBM3)-based affinity tag. The codon of the cbm3 gene from Clostridium thermocellum was optimized based on the codon usage of P. pastoris. The CBM3 tag was then fused with enhanced green fluorescent protein (CBM3-EGFP) or with inulinase and expressed in P. pastoris to demonstrate its ability to function as an affinity tag in a yeast expression system. We also examined the effects of glycosylation on the secreted CBM3-tag. The secreted wild-type CBM3-EGFP was glycosylated; however, this had little influence on the adsorption of the fusion protein to the regenerated amorphous cellulose (RAC; maximum adsorption capacity of 319 mg/g). Two CBM3-EGFP mutants lacking glycosylation sites were also constructed. The three CBM3-EGFPs expressed in P. pastoris and the CBM3-EGFP expressed in Escherichia coli all had similar RAC adsorption capacity. To construct a tag-free recombinant protein purification system based on CBM3, a CBM3-intein-EGFP fusion protein was expressed in P. pastoris. This fusion protein was stably expressed and the self-cleavage of intein was efficiently induced by DTT or L: -cysteine. In this study, we were able to purify the recombinant fusion protein with high efficiency using both intein and direct fusion-based strategies.

A more clear insight of the lysozyme crystal composition

AbstractCrystallization can be used as a purification method for proteins. Lysozyme was chosen as a model substance. Changing crystallization conditions will lead as shown to different lysozyme crystal morphologies with different properties. Beside others, lysozyme crystals can show a Tetragonal, High Temperature and Low Temperature Orthorhombic crystal morphology. Experiments such as conductivity measurements, pH tests, chloride detection tests, experiments using methylene blue as a dye and dissolution experiments were carried out to investigate the composition of the lysozyme crystals. It is proven that lysozyme crystals are made up of the initial buffer solution components: lysozyme (the protein), water which is part of the crystal lattice, salt ions which are attached to the protein molecule and voids filled with the buffer solution containing the crystallization agent (e.g. salt). Interesting dissolution behaviours of the lysozyme crystals were observed which are not described so far elsewhere (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)

Recombinant protein purification using complementary peptides as affinity tags

Affinity tags have become highly popular tools for purifying recombinant proteins from crude extracts by affinity chromatography. Besides, short peptides are excellent ligands for affinity chromatography, as they are not likely to cause an immune response in case of leakage into the product, they are more stable than antibodies to elution and cleaning conditions and they usually have very acceptable selectivity. Hydropathically complementary peptides designed de novo show enough selectivity to be used successfully as peptide ligands for protein purification from crude extracts. Recognition specificity and selectivity in the interaction between the complementary peptide pair His-Leu-Leu-Phe-Pro-Ile-Ile-Ile-Ala-Ala-Ser-Leu and Lys-Asn-Tyr-Pro-Lys-Lys-Lys-Met-Glu-Lys-Arg-Phe have been demonstrated by other authors. In this work, we designed a recombinant protein purification method using a peptide affinity tag that binds to a peptide-binding partner immobilized on a chromatographic matrix. The enhanced green fluorescent protein expressed (EGFP) in Escherichia coli was used as the model. The peptide Gly-Gly-Gly-His-Leu-Leu-Phe-Pro-Ile-Ile-Ile-Ala-Ala-Ser-Leu was synthesized by solid phase using the Fmoc chemistry and immobilized in NHS-Sepharose (PC-Sepharose). Gly residues were added as a spacer arm at the N terminus. The EGFP was expressed either with the fusion tag Lys-Asn-Tyr-Pro-Lys-Lys-Lys-Met-Glu-Lys-Arg-Phe on the C terminus (EGFP-CPTag) or without any fusion tag. After cell disruption, the extract was directly applied to the PC-Sepharose column equilibrated with 20mM sodium phosphate buffer, pH 7.0. The adsorbed EGFP-CPTag was then eluted with 1M Tris. The yield was 98% and the purification factor 4.6. By contrast, EGFP without tag pass through without interacting with the PC-Sepharose column. The method designed can be applied for the purification of other recombinant proteins.

Effects of l-arginine on solubilization and purification of plant membrane proteins

Biochemical analysis of membrane proteins is problematic at the level of solubilization and/or purification because of their hydrophobic nature. Here, we developed methods for efficient solubilization and purification of membrane proteins using l-arginine. The addition of 100 mM of basic amino acids ( l-arginine, l-lysine, and l-ornithine) to a detergent-containing solubilization buffer enhanced solubilization (by 2.6–4.3 fold) of a model membrane protein–polygalacturonic acid synthase. Of all the amino acids, arginine was the most effective additive for solubilization of this membrane protein. Arginine addition also resulted in the best solubilization of other plant membrane proteins. Next, we examined the effects of arginine on purification of a model membrane protein. In anion-exchange chromatography, the addition of arginine to the loading and elution buffers resulted in a greater recovery of a membrane protein. In ultrafiltration, the addition of arginine to a protein solution significantly improved the recovery of a membrane protein. These results were thought to be due to the properties of arginine that prevent aggregation of hydrophobic proteins. Taken together, the results of our study showed that arginine is useful for solubilization and purification of aggregate-prone membrane proteins.

Origin Single-stranded DNA Releases Sld3 Protein from the Mcm2–7 Complex, Allowing the GINS Tetramer to Bind the Mcm2–7 Complex

The replication fork helicase in eukaryotic cells is comprised of Cdc45, Mcm2-7, and GINS (CMG complex). In budding yeast, Sld3, Sld2, and Dpb11 are required for the initiation of DNA replication, but Sld3 and Dpb11 do not travel with the replication fork. Sld3 and Cdc45 bind to early replication origins during the G(1) phase of the cell cycle, whereas Sld2, GINS, polymerase ε, and Dpb11 form a transient preloading complex that associates with origins during S phase. We show here that Sld3 binds tightly to origin single-stranded DNA (ssDNA). CDK-phosphorylated Sld3 binds to origin ssDNA with similar high affinity. Origin ssDNA does not disrupt the interaction between Sld3 and Dpb11, and origin ssDNA does not disrupt the interaction between Sld3 and Cdc45. However, origin ssDNA substantially disrupts the interaction between Sld3 and Mcm2-7. GINS and Sld3 compete with one another for binding to Mcm2-7. However, in a mixture of Sld3, GINS, and Mcm2-7, origin ssDNA inhibits the interaction between Sld3 and Mcm2-7, whereas origin ssDNA promotes the association between GINS and Mcm2-7. We also show that origin single-stranded DNA promotes the formation of the CMG complex. We conclude that origin single-stranded DNA releases Sld3 from Mcm2-7, allowing GINS to bind Mcm2-7.

A 265-base DNA sequencing read by capillary electrophoresis with no separation matrix.

Electrophoretic DNA sequencing without a polymer matrix is currently possible only with the use of some kind of "drag-tag" as a mobility modifier. In free-solution conjugate electrophoresis (FSCE), a drag-tag attached to each DNA fragment breaks linear charge-to-friction scaling, enabling size-based separation in aqueous buffer alone. Here we report a 265-base read for free-solution DNA sequencing by capillary electrophoresis using a random-coil protein drag-tag of unprecedented length and purity. We identified certain methods of protein expression and purification that allow the production of highly monodisperse drag-tags as long as 516 amino acids, which are almost charge neutral (+1 to +6) and yet highly water-soluble. Using a four-color LIF detector, 265 bases could be read in 30 min with a 267-amino acid drag-tag, on par with the average read of current next-gen sequencing systems. New types of multichannel systems that allow much higher throughput electrophoretic sequencing should be much more accessible in the absence of a requirement for viscous separation matrix.

Single step surface modification of highly stable magnetic nanoparticles for purification of His-tag proteins

The aim of this study was to develop a simple, cheap, and rapid method for purification of His-tag recombinant proteins with high yields. The new immobilized metal ion affinity adsorbent containing superparamagnetic nanoparticles and hydrophilic resins are proposed here to improve the purification of His-tagged recombinant proteins. In this report, we have described the preparation of nanosized superparamagnetic nanoparticles (Fe3O4) which were prepared by chemical precipitation method followed by surface modification using phosphonomethyl iminodiacetic acid. The stable surface functionalized nanoparticles were further linked with Ni2+ for purification of 6× His-tagged proteins. The phosphonate group of the N-phosphonomethyl iminodiacetic acid ligand acts as a surface anchoring agent on magnetite nanoparticles and the remaining free –COOH groups outside for binding with Ni2+ ions. The nanoparticles were approximately 6–8 nm in size and were stable and had negligible non-specific binding for protein. The proteins were purified within 1 h and observed on sodium dodecyl sulfate-polyacrylamide electrophoresis gel.

PpsA, TufA, and Glutaminase Were Modulated under Yop Secretion Conditions in Yersinia enterocolitica

Yersinia enterocolitica expresses the Ysc type III secretion system (TTSS) for delivery of effector proteins (Yops) to host cells to manipulate immune system of the host. The study on the physiological change of Y. Enterocolitica is important in determining how cells efficiently support the expression of virulence factors and adapt to the inside of hosts, which is completely different from the outside environment. Ysc TTSS also secretes Yops into medium when cells are grown in calcium-deficient medium at 37°C. In the present work, a phosphoprotein purification kit was used to selectively enrich proteins whose characteristics changed under the Yop production conditions. Phosphoenol pyruvate synthase (PpsA), elongation factor Tu (TufA), and glutaminase were identified by matrix-assisted laser desorption/ionization time-of-flight. These results showed that the affinity to column and/or the steady-state level of PpsA, TufA, and glutaminase are altered under the Yop secretion conditions and suggested that any protein characteristic of these three proteins was changed under the conditions for the virulence factor expression suggested that certain characteristics of these three proteins were changed. This work demonstrated that specific protein purification method can be used to identify proteins from a complex protein mixture of cell extracts with emphasis on the specific characteristics of proteins.

Expression, purification and functional analysis of an odorant binding protein AaegOBP22 from Aedes aegypti

Mosquitoes that act as disease vectors rely upon olfactory cues for host-seeking, mating, blood feeding and oviposition. To reduce the risk of infection in humans, one of the approaches focuses on mosquitoes’ semiochemical system in the effort to disrupt undesirable host–insect interaction. Odorant binding proteins (OBPs) play a key role in mosquitoes’ semiochemical system. Here, we report the successful expression, purification of an odorant binding protein AaegOBP22 from Aedes aegypti in heterologous system. Protein purification methods were set up by Strep-Tactin affinity binding and size-exclusion chromatography. Analysis by SDS–PAGE and mass spectrum revealed the protein’s purity and molecular weight. Circular dichroism spectra showed the AaegOBP22 secondary structure had a pH dependent conformational change. The protein functions of AaegOBP22 were tested by fluorescent probe 1-NPN binding assays and ligands competitive binding assays. The results show AaegOBP22 proteins have characteristics of selective binding with various ligands.

Elastin-like polypeptides as a purification tag for recombinant proteins.

This unit presents a recombinant protein purification method that employs an elastin-like polypeptide (ELP) as a purification tag. ELPs undergo a sharp and reversible phase transition when heated above their lower critical solution temperature. ELPs retain this behavior when they are fused to a protein, and thereby provide a simple method to isolate a recombinant ELP fusion protein from cell contaminants by cycling the solution through the insoluble and soluble phase of the ELP fusion protein using a procedure that is termed Inverse Transition Cycling. This method does not require the use of chromatography, so it is cost-effective, easy to scale up, and easy to multiplex.

A heme fusion tag for protein affinity purification and quantification.

We report a novel affinity-based purification method for proteins expressed in Escherichia coli that uses the coordination of a heme tag to an L-histidine-immobilized sepharose (HIS) resin. This approach provides an affinity purification tag visible to the eye, facilitating tracking of the protein. We show that azurin and maltose binding protein are readily purified from cell lysate using the heme tag and HIS resin. Mild conditions are used; heme-tagged proteins are bound to the HIS resin in phosphate buffer, pH 7.0, and eluted by adding 200-500 mM imidazole or binding buffer at pH 5 or 8. The HIS resin exhibits a low level of nonspecific binding of untagged cellular proteins for the systems studied here. An additional advantage of the heme tag-HIS method for purification is that the heme tag can be used for protein quantification by using the pyridine hemochrome absorbance method for heme concentration determination.

Microbial polyhydroxyalkanote synthesis repression protein PhaR as an affinity tag for recombinant protein purification

BackgroundPhaR which is a repressor protein for microbial polyhydroxyalkanoates (PHA) biosynthesis, is able to attach to bacterial PHA granules in vivo, was developed as an affinity tag for in vitro protein purification. Fusion of PhaR-tagged self-cleavable Ssp DnaB intein to the N-terminus of a target protein allowed protein purification with a pH and temperature shift. During the process, the target protein was released to the supernatant while PhaR-tagged intein was still immobilized on the PHA nanoparticles which were then separated by centrifugation.ResultsFusion protein PhaR-intein-target protein was expressed in recombinant Escherichia coli. The cell lysates after sonication and centrifugation were collected and then incubated with PHA nanoparticles to allow sufficient absorption onto the PHA nanoparticles. After several washing processes, self-cleavage of intein was triggered by pH and temperature shift. As a result, the target protein was released from the particles and purified after centrifugation. As target proteins, enhanced green fluorescent protein (EGFP), maltose binding protein (MBP) and β-galactosidase (lacZ), were successfully purified using the PhaR based protein purification method.ConclusionThe successful purification of EGFP, MBP and LacZ indicated the feasibility of this PhaR based in vitro purification system. Moreover, the elements used in this system can be easily obtained and prepared by users themselves, so they can set up a simple protein purification strategy by themselves according to the PhaR method, which provides another choice instead of expensive commercial protein purification systems.

Establishment of a Protein Frequency Library and Its Application in the Reliable Identification of Specific Protein Interaction Partners

The reliable identification of protein interaction partners and how such interactions change in response to physiological or pathological perturbations is a key goal in most areas of cell biology. Stable isotope labeling with amino acids in cell culture (SILAC)-based mass spectrometry has been shown to provide a powerful strategy for characterizing protein complexes and identifying specific interactions. Here, we show how SILAC can be combined with computational methods drawn from the business intelligence field for multidimensional data analysis to improve the discrimination between specific and nonspecific protein associations and to analyze dynamic protein complexes. A strategy is shown for developing a protein frequency library (PFL) that improves on previous use of static “bead proteomes.” The PFL annotates the frequency of detection in co-immunoprecipitation and pulldown experiments for all proteins in the human proteome. It can provide a flexible and objective filter for discriminating between contaminants and specifically bound proteins and can be used to normalize data values and facilitate comparisons between data obtained in separate experiments. The PFL is a dynamic tool that can be filtered for specific experimental parameters to generate a customized library. It will be continuously updated as data from each new experiment are added to the library, thereby progressively enhancing its utility. The application of the PFL to pulldown experiments is especially helpful in identifying either lower abundance or less tightly bound specific components of protein complexes that are otherwise lost among the large, nonspecific background.

A unified method for purification of basic proteins

Protein purification is still very empirical, and a unified method for purifying proteins without an affinity tag is not available yet. In the postgenomic era, functional genomics, however, strongly demands such a method. In this paper we have formulated a unique method that can be applied for purifying any recombinant basic protein from Escherichia coli. Here, we have found that if the pH of the buffer is merely one pH unit below the isoelectric point (p I) of the recombinant proteins, most of the latter bind to the column. This result supports the Henderson–Hasselbalch principle. Considering that E. coli proteins are mostly acidic, and based on the p I determined theoretically, apparently all recombinant basic proteins (at least p I−1 ⩾ 6.94) may be purified from E. coli in a single step using a cation-exchanger resin, SP-Sepharose, and a selected buffer pH, depending on the p I of the recombinant protein. Approximately, two-fifths of human proteome, including many if not all nucleic acid-interacting proteins, have a p I of 7.94 or higher; virtually all these 12,000 proteins may be purified using this method in a single step.