Method For Determination Of Content Research Articles

Chemical composition combined with network pharmacology and quality markers analysis for the quality evaluation of Qing-fei-da-yuan granules.

Qing-fei-da-yuan granules (QFDYGs) had been proved to be an effective TCM prescription for treating coronavirus disease 2019 (COVID-19), which are composed of a variety of TCMs, and characterized by multiple components, multiple targets and overall regulation. It is meaningful to further study the chemical composition and pharmacology of QFDYGs for quality evaluation. However, due to the complexity of the components of QFDYGs, there are no reliable and simple analytical methods for current quality evaluation. In this work, antipyretic activity assessment of QFDYGs in the LPS-induced New Zealand rabbit model was carried out to verify the efficacy firstly. It was proved that QFDYGs can be used to relieve fever to help preventing or controlling the prevalence of influenza and pneumonia. Subsequently, UHPLC-ESI-QTOF-MS/MS combined with network pharmacology, quality markers and fingerprint analysis were used to establish the quality control condition. The chemical compositions were analyzed by UHPLC-ESI-QTOF-MS/MS, and 79 of them were identified, such as arecoline, mangiferin, paeoniflorin, etc. Then, the network pharmacology strategy based on 45 candidate components (CCs) in conjunction with influenza and pneumonia diseases was employed to screen the potential active ingredients. According to the drug-CCs-genes-diseases (D-CCs-G-D) networks, baicalein, honokiol, baicalin, paeoniflorin, saikosaponin A, glycyrrhizic acid and hesperidin were selected as quality markers. And a method for content determination of the 7 quality markers was established by optimizing extraction methods, chromatographic conditions and methodological verification. Finally, the quality of 15 batches of QFDYGs was evaluated by using the 7 quality markers combined with fingerprints and principal component analysis (PCA). The analyzed results showed that baicalin, paeoniflorin, glycyrrhizic acid and hesperidin were the high content and stable quality markers. QFDYGs were characterized by overall consistency and individual ingredient differences among the 15 batches. Our quality evaluation study will provide reference for the further development and research of QFDYGs.

Quality evaluation and grading standard discussion on Cinnamomi Ramulus

This study explored the relationship between the appearance traits and internal components of Cinnamomi Ramulus pieces, so as to provide a reference for the quality evaluation and the formulation of grade standards. This study determined the appearance traits and index component contents of 41 batches of Cinnamomi Ramulus pieces in the core producing areas of Guangxi and Guangdongand established the HPLC characteristic map method. The weight of the pieces, the narrowest diameter, and the widest diameter of the tr ansverse section were used as the indices of appearance traits. The content of index components(cinnamic acid and cinnamalde hyde)was determined by the established content determination method. The chromatographic characteristics were determinedon a Waters XBridge C_(18)(4. 6 mm×250 mm, 5 μm) column with a mobile phase consisting of 0. 1% phosphoric acidacetonitrile and gradient elution at the flow rate of 1 mL ·min~(-1). The column temperature was 30 ℃, and the detection wavelength was 254 nm. Cluster analysis, principal component analysis, and other stoichiometric methods were used to analyze the correlation between theap pearance traits and the index/characteristic components of Cinnamomi Ramulus pieces and compare the qu ality differences of the piecesfrom different batches and plac es. The results showed that the larger weight, the narrowest diameter, andthe widest diameter of the tra nsverse section indicated lowercontent of main indexes/characteristic components, and there was a synergistic decreasing trend amongd ifferent components. The overall quality of Cinnamomi Ramulus pieces in Guangdong Province and Guangxi Province was similar, but there were still differences between different origins and different batches of the same origin. It is scientific and feasible to evaluatethe quality of Cinnamomi Ramulus pieces and establish grading standards based on the appearance traits and index/character istic components. The research provides a more scientific and comprehensive basis for the quality control evaluation and standardformulation of Cinnamomi Ramulus.

Research Progress on Active Ingredients and Product Development of Lycium ruthenicum Murray.

Lycium ruthenicum Murray possesses significant applications in both food and medicine, including antioxidative, anti-tumor, anti-fatigue, anti-inflammatory, and various other effects. Consequently, there has been a surge in research endeavors dedicated to exploring its potential benefits, necessitating the organization and synthesis of these findings. This article systematically reviews the extraction and content determination methods of active substances such as polysaccharides, anthocyanins, flavonoids, and polyphenols in LRM in the past five years, as well as some active ingredient composition determination methods, biological activities, and product development. This review is divided into three main parts: extraction and determination methods, their bioactivity, and product development. Building upon prior research, we also delve into the economic and medicinal value of Lycium ruthenicum Murray, thereby contributing significantly to its further exploration and development. It is anticipated that this comprehensive review will serve as a valuable resource for advancing research on Lycium ruthenicum Murray.

Prediction of cyanidin 3-rutinoside content in Michelia crassipes based on near-infrared spectroscopic techniques.

Currently the determination of cyanidin 3-rutinoside content in plant petals usually requires chemical assays or high performance liquid chromatography (HPLC), which are time-consuming and laborious. In this study, we aimed to develop a low-cost, high-throughput method to predict cyanidin 3-rutinoside content, and developed a cyanidin 3-rutinoside prediction model using near-infrared (NIR) spectroscopy combined with partial least squares regression (PLSR). We collected spectral data from Michelia crassipes (Magnoliaceae) tepals and used five different preprocessing methods and four variable selection algorithms to calibrate the PLSR model to determine the best prediction model. The results showed that (1) the PLSR model built by combining the blockScale (BS) preprocessing method and the Significance multivariate correlation (sMC) algorithm performed the best; (2) The model has a reliable prediction ability, with a coefficient of determination (R2) of 0.72, a root mean square error (RMSE) of 1.04%, and a residual prediction deviation (RPD) of 2.06. The model can be effectively used to predict the cyanidin 3-rutinoside content of the perianth slices of M. crassipes, providing an efficient method for the rapid determination of cyanidin 3-rutinoside content.

Analysis of chemical compositions in different parts of Isodon japonicus using UPLC-Q-TOF-MS technique combined with chemometrics

In order to analyze the similarities and differences of chemical compositions between the roots and stems and leaves of Isodon japonicus(IJ), this study utilized UPLC-Q-TOF-MS technology to systematically characterize its chemical compositions, analyzed and identified the structure of its main compounds, and established a method for simultaneous determination of its content by refe-rence substance. A total of 34 major compounds in IJ, including 14 reference compounds, were identified or predicted online. Moreover, an UPLC-UV content determination method was developed for 11 compounds [danshensu, caffeic acid, vicenin-2,(1S,2S)-globoidnan B, rutin,(+)-rabdosiin,(-)-rabdosiin,(1S,2S)-rabdosiin, shimobashiric acid C, rosmarinic acid, and pedalitin]. The method exhibited excellent separation, stability, and repeatability, with a wide linear range(0.10-520.00 μg·mL~(-1)) and high linearity(R~2>0.999). The average recovery rates ranged from 94.72% to 104.2%. The principal component analysis(PCA) demonstrated a clear difference between the roots and stems and leaves of IJ, indicating good separation by cluster. Furthermore, the orthogonal partial least squares discriminant analysis(OPLS-DA) model was employed, and six main differentially identified compounds were identified: rosmarinic acid, shimobashiric acid C, epinodosin, pedalitin, rutin, and(1S,2S)-rabdosiin. In summary, this study established a strategy and method for distinguishing different parts of IJ, providing a valuable tool for quality control of IJ and a basis for the ratio-nal utilization and sustainable development of IJ.

A study on the simultaneous determination of nitrogen content and 15N isotope abundance in plants using peak height intensities at m/z 28 and 29

A method for simultaneous determination of nitrogen content and 15N isotope abundance in plants was established by Elemental analysis-gas isotope ratio mass spectrometry. Taking poplar leaves and l-glutamic acid as standards, nitrogen content was determined using the standard curve established by weighted least squares regression between the mass of nitrogen element and the total peak height intensity at m/z 28 and 29. Then the 15N isotope abundance was calculated with the peak height intensity at m/z 28 and 29. Through the comparison of several sets of experiments, the impact of mass discrimination effect, tin capsule consumables, isotope memory effect, and the quality of nitrogen on the results were assessed. The results showed that with a weight of 1/x2, the standard curve has a coefficient of determination (R2) of 0.9996. Compared to the traditional Kjeldahl method, the measured nitrogen content deviated less than 0.2 %, and the standard deviation (SD) was less than 0.2 %. Compared to the sodium hypobromite method, the 15N isotopic abundances differed less than 0.2 atom%15N, and the SD was less than 0.2 atom% 15N. The established method offers the advantages of being fast, simple, accurate, and high throughput, providing a novel approach for the simultaneous determination of nitrogen content and 15N isotope abundance in plant samples.

Transdermal diffusion research on functional substances of Jingu Zhitong Gel

This study systematically explored the transdermal diffusion law of functional substances of Jingu Zhitong Gel(JGZTG). The transdermal diffusion research methods of JGZTG were investigated by single factor trial with the automated transdermal(dry-heat) sampling system. High performance liquid chromatography(HPLC) content determination method was established to determine the contents of ferulic acid, senkyunolide I, cinnamic acid, hydroxy-ε-xanthoxylin, hydroxy-α-xanthoxylin, and hydroxy-β-xanthoxylin in the transdermal diffusion solution of JGZTG. The transdermal diffusion law of the components within 16 h was investigated. The results showed that the optimal transdermal diffusion method of JGZTG was as follows: Rat skin was used as the transdermal barrier; normal saline was used as the receiving medium; the dosage of JGZTG was 0.3 g, and the receiving solution was extracted by ethyl acetate. The results of transdermal diffusion showed that the release of ferulic acid, cinnamic acid, and senkyunolide I increased significantly at 0-8 h and slowed down at 8-16 h. The drug release was a synergic process of diffusion and dissolution, in which ferulic acid and cinnamic acid followed Higuchi and Ritger-Peppas equations, and liguolactone I followed Higuchi equation. The transdermal diffusion curves of hydroxy-ε-zanthoxylin, hydroxy-α-zanthoxylin, and hydroxy-β-zanthoxylin showed continuous release within 16 h, and the drug release was skeleton dissolution. The diffusion law followed zero-order equation, first-order equation, and Ritger-Peppas equation. In clonclusion, it is a controlled release of ferulic acid, ligustrone I, cinnamic acid, hydroxy-ε-pyrroxylin, hydroxy-α-pyrroxylin, and hydroxy-β-pyrroxylin in JGZTG, which can maintain stable blood drug concentration with 16 h, and the cumulative transmittance of each component with 12 h can reach 80% of cumulative transmittance with 24 h, which is in line with the clinical drug use law of bis in die.

Quality control of Tianwang Buxin Pills based on UPLC fingerprint and multi-component quantification

Tianwang Buxin Pills have demonstrated therapeutic effects in clinical practice, whereas there is a serious lack of comprehensive quality control to ensure the safety and effectiveness of clinical medication. In this study, ultra-performance liquid chromatography(UPLC) was employed to establish the fingerprint and the method for simultaneously determining the content of seven components of Tianwang Buxin Pills. Furthermore, chemometrics was employed to identify the key factors for the stable quality, which provided a reference for the comprehensive quality control and evaluation of this preparation. There were 25 common peaks in the UPLC fingerprints of 15 batches of Tianwang Buxin Pills, from which thirteen compounds were identified. A quantitation method was established for seven pharmacological components(α-linolenic acid, salvianolic acid B, glycyrrhetinic acid, schisandrin A, β-asarone, 3,6'-disinapoylsucrose, and ligustilide). The principal component analysis(PCA) and partial least square discriminate analysis(PLS-DA) were performed to determine the key pharmacological components for controlling the quality stability of Tianwang Buxin Pills, which included 3,6'-disinapoylsucrose, α-linolenic acid, and β-asarone. The established fingerprint and multi-component content determination method have strong specificity, stability, and reliability. In addition, 3,6'-disinapoylsucrose, α-linolenic acid, and β-asarone are the key pharmacological components that ensure the quality stability between batches and can be used to comprehensively control the quality of Tianwang Buxin Pills. The findings provide a scientific basis for the quality evaluation and standard establishment of Tianwang Buxin Pills.

Solvents in the industrial synthesis of naphazoline nitrate: implementation of the principles of "Green chemistry" and analysis

The aim: implementation of the principles of green chemistry by regenerating the synthesis solvent 1,2,4-trichlorobenzene and reusing it during the synthesis of the Naphazoline nitrate substance. Study of the influence of the regenerated solvent on the quality of the final product by controlling analytical quality parameters. Development of a method for the quantitative determination and validation of synthesis solvents in a substance. Materials and methods: samples of the substance were synthesized according to the optimized proprietary technology of Farmak JSC. The obtained batches of fresh and regenerated 1,2,4-trichlorobenzene were analyzed according to the monograph of the European Pharmacopoeia on Naphazoline nitrate 0147. Results: the possibility of using regenerated 1,2,4-trichlorobenzene for the synthesis of the substance Naphazoline nitrate has been proven. It is shown that the regenerated solvent does not have a negative effect on the profile of impurities and the polymorphic form of the substance. Analytical quality parameters met the requirements of the internal specification and the requirements of the European Pharmacopoeia monograph. The developed and validated method of quantitative determination of synthesis solvents makes it possible to determine them at the required level. Conclusions: the introduction of regenerated 1,2,4-trichlorobenzene into the synthesis scheme made it possible to significantly reduce the amount of waste per 1 kg of product, which in turn significantly reduced the negative impact on the environment. Analytical quality parameters for regenerated 1,2,4-trichlorobenzene meet the requirements of the internal specification. Industrial series obtained on the regenerated solvent meet the requirements of the monograph of the European Pharmacopoeia. The polymorphic form of the substance batches manufactured on regenerated 1,2,4-trichlorobenzene corresponds to the polymorphic form of the substance batches manufactured on the fresh solvent. The obtained results on the influence of the regenerated solvent on the profile of impurities in the finished substance show the similarity of the profile of the series manufactured on both solvents. According to the requirements of ICH Q3C Impurities: Guideline for residual solvents, a method for quantitative determination of the residual content of 1,2,4-trichlorobenzene in the final product by gas chromatography was developed and validated. The absence of synthesis solvents at the limit of detection is shown

A comprehensive strategy for quality evaluation of Changan powder by fingerprinting combined with rapid qualitative and quantitative multi-ingredients profiling.

Changan powder (CAP) is mainly used to treat various intestinal diseases. Few studies on CAP have been reported; therefore, it is necessary to clarify the material basis of CAP to lay the foundation for further elucidating its functional mechanism and support the rational use of drugs. In the present study, we aimed to propose a methodology for the quality control of CAP based on qualitative and quantitative analysis of its components. An ultra-performance liquid chromatography coupled with Fourier transform ion cyclotron resonance mass spectrometry (UPLC-FT-ICR-MS) method was developed to identify chemical components in CAP. In addition, fingerprints of 10 different batches of CAP were established, and quantitative analysis based on UPLC was performed to analyze the quality of CAP. A total of 58 compounds were preliminarily characterized. The similarity of 10 batches of CAP was greater than 0.995, and 23 common peaks were calibrated. Investigation of the quantitative analytical methodology showed that the four components had good linear relationships within their respective concentration ranges (r2 ≥ 0.9992), and the relative standard deviation (RSD) of precision and stability was less than 2%. The RSD of sample recovery ranged from 0.78% to 1.52%. The established method can quickly and effectively identify the chemical components of CAP and accurately quantify the known components in CAP. The established fingerprinting and content determination method is stable, reliable, and easy to operate and can be applied in quality control and in vivo research on CAP.

Development and validation of an UHPLC-DAD method for oleandrin content determination in dried leaves of Nerium oleander from Eastern Algeria

This study aimed to develop and validate an UHPLC-DAD method for quantifying oleandrin in dried leaves and assessing its concentrations in samples from Eastern Algeria.For this purpose, a total of 100 leaf samples were collected from wild and cultivated shrubs across five provinces in Eastern Algeria during the flowering period. The UHPLC-DAD system was used to identify and quantify oleandrin. Chromatographic separation was performed using a Kinetex C18 Polar column (100 x 2.1 mm, 2.6 μm) from Phenomenex®. The flow rate was of 0.6 mL/min, and the detection wavelength was set at 220 nm.The mean oleandrin amount in dried leaf samples collected from the entire region was found to be 0.12 ± 0.12 mg/g. The analysis revealed statistically significant differences among the provinces and between wild and cultivated plants. These differences highlight potential disparities in the risk of acute poisoning in case of ingestion. However, no significant differences were observed among plants with different flower colors. Furthermore, no correlation was observed between the mean oleandrin levels and the meteorological parameters recorded during the annual survey of the harvest year, including temperature, humidity, sunshine, and cumulative rainfall. There was also no correlation between the mean, median, and 90th percentile oleandrin levels and the elevation of the collection sites.

Precise evaluation of batch adsorption kinetics of plant total polyphenols based on a flow-injection online spectrophotometric method.

Efficient evaluation of adsorption kinetics of plant total polyphenols is essential for the design of adsorption separation of bioactive compounds. The conventional method uses manual sampling with poor reproducibility. Here, we developed a new method for on-line determination of total polyphenol content (TPC) in plant extracts by applying the Folin-Ciocalteu method in flow-injection analysis (FIA). The FIA parameters were optimized and a standard curve with excellent linearity was established. Precise determination of TPC with a satisfactory sample throughput of 20 h-1 was achieved for the adsorption kinetic study. The pseudo-second-order kinetic model was found to better describe the kinetic parameters of the batch adsorption/desorption process. The developed method proved to be accurate compared with the conventional method. The FIA method holds significant promise for studying and monitoring adsorption processes, due to its automatic on-line nature, low consumption of reagents and samples, and the ability to generate large quantities of highly accurate adsorption data.

Screening of bioactive components endowing hawthorn with turbidity-eliminating and lipid-lowering functions and development of quality control method of hawthorn

Hawthorn has the efficacy of eliminating turbidity and lowering the blood lipid level, and it is used for treating hyperlipidemia in clinic. However, the bioactive components of hawthorn are still unclear. In this study, the spectrum-effect relationship was employed to screen the bioactive components of hawthorn in the treatment of hyperlipidemia, and then the bioactive components screened out were verified in vivo. Furthermore, the quality control method for hawthorn was developed based on liquid chromatography-mass spectrometry(LC-MS). The hyperlipidemia model of rats was built, and different polar fractions of hawthorn extracts and their combinations were administrated by gavage. The effects of different hawthorn extract fractions on the total cholesterol(TC), triglycerides(TG), and low-density lipoprotein-cholesterol(LDL-C) in the serum of model rats were studied. The orthogonal projections to latent structures(OPLS) algorithm was used to establish the spectrum-effect relationship model between the 24 chemical components of hawthorn and the pharmacodynamic indexes, and the bioactive components were screened out and verified in vivo. Finally, 10 chemical components of hawthorn, including citric acid and quinic acid, were selected to establish the method for evaluating hawthorn quality based on LC-MS. The results showed that different polar fractions of hawthorn extracts and their combinations regulated the TG, TC, and LDL-C levels in the serum of the model rats. The bioactive components of hawthorn screened by the OPLS model were vitexin-4″-O-glucoside, vitexin-2″-O-rhamnoside, rutin, citric acid, malic acid, and quinic acid. The 10 chemical components of hawthorn, i.e., citric acid, quinic acid, rutin, gallic acid, vitexin-4″-O-glucoside, vitexin-2″-O-rhamnoside, malic acid, vanillic acid, neochlorogenic acid, and fumaric acid were determined, with the average content of 38, 11, 0.018, 0.009 5, 0.037, 0.017, 8.1, 0.009 5, 0.073, and 0.98 mg·g~(-1), respectively. This study provided a scientific basis for elucidating the material basis of hawthorn in treating hyperlipidemia and developed a content determination method for evaluating the quality of hawthorn.

Quality evaluation of salt-fired Eucommiae Cortex based on HPLC fingerprint, multi-component content determination, and chemometrics

This study established an HPLC fingerprint and multi-component content determination method for salt-fired Eucommiae Cortex, and evaluated the quality of salt-fired Eucommiae Cortex from different sources using fingerprint similarity evaluation, cluster analysis(CA), principal component analysis(PCA), and orthogonal partial least square discriminate analysis(OPLS-DA). HPLC was launched on a Cosmosil 5C_(18)-MS-Ⅱ column(4.6 mm×250 mm, 5 μm) by gradient elution with a mobile phase of methanol-0.2% phosphoric acid aqueous solution at a flow rate of 1.0 mL·min~(-1), detection wavelength of 238 nm, column temperature of 30 ℃, and an injection volume of 10 μL. The results of fingerprint similarity evaluation for 20 batches of salt-fired Eucommiae Cortex indicated that, except for batch S3 with a similarity of 0.893, the similarity of the other 19 batches was of ≥ 0.919, suggesting good similarity. Fourteen common peaks were calibrated and seven common peaks were identified including geniposidic acid. The mass fractions of geniposidic acid, chlorogenic acid, geniposide, genipin, pinoresinol diglucoside, liriodendrin, and pinoresinol-4-O-β-D-glucopyranoside were 0.062 0%-0.426 9%, 0.024 9%-0.116 5%, 0.009 5%-0.052 9%, 0.005 5%-0.034 8%, 0.115 9%-0.317 8%, 0.016 4%-0.108 8%, and 0.026 4%-0.039 8%, respectively. Using CA, PCA, and OPLS-DA, the 20 batches of salt-fired Eucommiae Cortex were classified into three categories. Additionally, through the analysis of variable importance in projection(VIP) under OPLS-DA, two differential quality markers, geniposidic acid and chlorogenic acid, were identified. The established HPLC fingerprint and multi-component content determination method is stable and reliable, providing a reference for quality control of salt-fired Eucommiae Cortex.

Screening for Q-markers of Antiviral Granules based on neuraminidase inhibitors and Effect-constituent index

BackgroundAntiviral granules (AG) is a classic traditional Chinese medicine commonly employed for influenza treatment. However, there is an urgent need to improve its quality control standards. PurposeThe quality markers (Q-markers), guided by the Effect-constituent Index (ECI), were screened through in vitro and in vivo component identification, molecular docking, and neuraminidase (NA) inhibition experiments. MethodsThe chemical components in AG underwent analysis using UPLC-Q-Orbitrap HRMS and GC–MS, and serum pharmacochemistry was employed to analyze the components absorbed into the bloodstream. Molecular docking was used to evaluate the affinity of the prototype components to NA, and the inhibitory activity of the candidate components was later confirmed through NA inhibitor experiments. Following this, a UHPLC-MS/MS method was developed to screen and quantify the Q-markers in 20 sample batches. Lastly, the ECI was formulated using a multi-index comprehensive evaluation method that combines composition, content, and activity. ResultsA total of 246 compounds were identified in AG, and 89 prototype components and 19 metabolic components were detected in the serum of the rats. Molecular docking revealed that the binding energy of 35 candidate active ingredients was better than that of the original ligand and the target protein. Among these candidate active ingredients, 12 candidate Q-markers demonstrated significant inhibitory effects in NA inhibition experiments, with IC50 values ranging from 0.954 to 3.408 mM. A UHPLC-MS/MS content determination method was established for the quantification of 11 Q-markers, including Forsythiaside A, Pogostone, Verbascoside, Mangiferin, 5-methoxy-8-hydroxypsoralen, Curcumenol, Luteolin-7-glucuronide, Kaempferol-3-O-rutinoside, Baicalin, Rutin, and Bergaptol, in 20 batches of samples. The ECI was calculated based on activity and content of these Q-markers. Pearson's correlation analysis of the NA inhibitory effect of the samples and the ECI resulted in an R value of 0.859, indicating a good correlation. Furthermore, this correlation coefficient surpassed those observed between the content of each Q-marker and the NA inhibitory effect. ConclusionThe Q-markers for treating influenza with AG have been successfully screened, and the ECI of AG has been constructed. These findings will provide beneficial strategies for improving the quality control level of AG.

Quality by design tool evaluated green stability-indicating UPLC content determination method for the Olanzapine and Samidorphan dosage form

A green, environmentally friendly, quick, sensitive, cost-effective, stability-indicating, and analyst-friendly UPLC method for determining the content of Olanzapine and Samidorphan tablets formulation was developed since no method was reported in published articles. Waters CHS (50 × 2.1) mm, 1.7 um column, flow rate of 0.3 mL/min, injection volume of 1.0 µL, column temperature of 30 °C, detection wavelength of 232 nm, and a total runtime of 2 min were used to quantify the analytes. The mobile phase was composed of a solution containing 0.01 % di sodium phosphate and acetonitrile in the ratio of (30:70, v/v). The optimised technique has been validated, and the results are met the regulatory criteria. Olanzapine's accuracy results found from 99.5 % to 99.8 %, whereas Samidorphan accuracy results found from 99.4 % to 100.4 %. Olanzapine's precision and intermediate precision %RSD results found from 0.3 % to 0.7 %, whereas Samidorphan found from 0.5 % to 0.7 %. The correlation coefficient value for both analytes was found to be greater than 0.999 for the linearity range from 2.5 µg/mL to 15.0 µg/mL. Solution stability established for 24 hrs and filter compatibility studied. By studying forced degradation, the method stability indicating nature is proven. The method's robustness was assessed by utilising a design expert software tool. The method greenness was evaluated by using National method environmental index (NEMI), Green analytical procedure index (GAPI), Analytical greenness (AGREE) tools and Analytical Eco-Scale. AGREE value found 0.66 and eco-scale value found 81.

Harmonizing international quality standards for Andrographis paniculata: A comparative analysis of content determination methods across pharmacopeias

The quality standards for Andrographis paniculata, a widely used medicinal herb, exhibited significant variations across different pharmacopeias. In this study, we compared the HPLC content determination methods and total lactone content of A. paniculata samples from different regions, as specified in the Chinese (CP), United States (USP), European (EP), Thai (TP), and Indian pharmacopeias (IP), as well as the Hong Kong Chinese Materia Medica Standards (HK). We aimed to assess the differences and similarities among these pharmacopeias and harmonized international quality standards for A. paniculata. The analysis revealed variations in sample preparation, liquid chromatographic conditions, fingerprint profiles, and total lactone content among the different pharmacopeias. Specifically, the CP and HK methods exhibited superior sample preparation and chromatographic separation. Further comparing the content of 20 A. paniculata samples with the CP, USP, EP and HK methods showed consistent determinations for the same components, indicating similar detection capabilities. The discrepancies in total lactone content primarily stemmed from differences in the number and types of detected compounds. Moreover, the acceptance criteria exhibited a stringency in the order CP > HK > EP > USP. In conclusion, this comparison analysis of content determination in CP, USP, HK, EP, TP and IP provided a scientific foundation for the international standardization and trade regulations of A. paniculata. It also served as a valuable reference for the development of international quality standards for other medicinal herbs, facilitating the harmonization of global pharmaceutical standards.

Using the SWAT model to characterise the water regime of soils in agrolandscapes

The classification of soils water regimes a basic scientific basis in the form of an interdependent relationship between the movement of water and the formation of a soil profile, i. e. it is soil-genetic classification. This kind of classification provides a scientific and methodological platform for studying both the water regimes of soils in the landscape and the distribution of soils in the soil cover of the landscape. Numerical methods for representing the hydrological regimes of soils in the agricultural landscape are based on physically validated mathematical models of the soil water movement and spatial GIS information, which together allow to calculate, analyze and predict soil water regime, runoff in the scale of watersheds, substance transport in the soil profile, leaching processes, as well as the content of available soil moisture reserves in the agrolandscape structure – which is important for practice. A spatial-dynamic SWAT (Soil-Water-Atmosphere-Tool) model is presented to describe the water regimes of soils in the agro-landscape of the finite moraine ridge of the Upper Volga postglacial region (East European Plain, Tver region), as an example of landscape numerical hydrological models. Some examples are given in the article, which demonstrate that modeled data correspond well with experimental data on soil moisture dynamics in several points of agrolandscape for 3 depth levels, reflecting surface, deep (at groundwater level) and middle layers of soil profile, i. e. 10–20, 50–60 and 90–100 cm. On the one hand, the data were obtained by calculations with the help of the considered landscape-dynamic model; and on the other hand, – by classical soil drilling, sampling and gravimetric method for soil moisture content determination. It has been shown that the landscape model, adapted for specific conditions, using a digital elevation model with a resolution of 1×1 m per pixel, to calculate the soil water regime at different points of the agrolandscape satisfactorily describes the spatial-dynamic profile data on soil moisture.

Hepatoprotective activity of Patrinia scabiosaefolia Fisch and quality evaluation based on UPLC fingerprint and multi-component analysis

To establish a quality evaluation method for Patrinia scabiosaefolia Fisch (PS), as well as to study the anti-inflammatory and hepatoprotective effects of the aqueous extract of Patrinia scabiosaefolia Fisch (APS). We used ultra performance liquid chromatography (UPLC) to establish fingerprint and content determination method for PS. The alcoholic liver injury model was prepared by feeding Lieber-DeCarli alcohol liquid feed to mice. We determined the levels of ALT, AST, TC, TG in serum, as well as GSH, MDA in the liver. The mRNA relative expression levels of TNF-α, IL-6, IL-1β, INOS and COX-2 were detected by qRT-PCR, and liver tissues were taken for pathological examination. The fingerprints of 16 batches of PS were established, and 3 component peaks were identified, which were chlorogenic acid (CA), isochlorogenic acid A (ICAA) and isochlorogenic acid C (ICAC). The similarity of the 6 common peaks was between 0.924 and 1.000. A mice model of alcoholic liver injury was successfully made by mixing alcohol liquid feed. The levels of ALT, AST, TC and TG in serum and MDA, TNF-α, IL-1β, LL-6, COX-2 and INOS mRNA in liver were effectively reduced in the drug administration group. The levels of GSH in mouse liver tissue were increased in the drug administration group. The method has good repeatability, stability and feasibility, and it meets the requirements for Quality evaluation. APS exhibits a protective effect against alcoholic liver injury (ALI) in mice.

Comparison between two gypsum content determination methods applied to the study of soils in arid regions

With the scarcity, degradation of soils, the growing populations and the need to guarantee their food security, the valorization of gypsum soils widespread in arid and semi-arid regions is becoming a necessity. North African countries have a large part of their land area located in arid regions. It is therefore important to characterize the gypsum content using simple, rapid, economical and, environmentally friendly methods. Several methods have been proposed in the literature (chemical, thermogravimetric, and x-ray techniques). In this work, a comparison between two methods for gypsum determination in soils was undertaken. The first method of Coutinet is chemical and based on the use of BaSO4 for the precipitation of sulfate ions. The second method is Artieda method which is based on measuring the weight difference caused by the loss of crystalline water from gypsum molecules between the temperatures of 70 and 90 °C. To achieve the objective of this work, forty-three soil samples were analyzed. They were taken from two arid regions (Ouargla and Touggourt) located in the northern Sahara (Algeria). The soils contain gypsum accumulations. The results showed that most of the samples are slightly gypsiferous, with 36 and 32 samples for the Coutinet and Artieda methods respectively. A strong positive correlation (R2 = 0.95) exists between the results of the two methods studied. For gypsum contents higher than 2 %, the correlation coefficient is 0.94. However, for samples with contents less than 2 %, the correlation is very weak with R2=0.19. The Artieda method is thus encouraged for the gypsum quantification in soils of arid regions. This method is easy, requiring simple laboratory equipment (mainly a ventilated oven and a precision balance). Chemical methods have the disadvantage of being time-consuming and using expensive chemicals that are dangerous for the environment and human health.