Methanol Tolerance Research Articles

Modular assembly of metal nanoparticles/mesoporous carbon two-dimensional nanosheets

The manipulation of polymeric micelles across extended-length scales is a key challenge in the design of integrated mesoporous materials with well-defined geometry and advanced functions. Herein, we demonstrate a modular assembly strategy to construct metal nanoparticle functionalized mesoporous carbon two-dimensional (2D) nanosheets by organizing zero-dimensional (0D) spherical monomicelle modules on the 2D supporting blocks. The modular assembly process involves two key steps: the “modularization” step is used to synthesize highly uniform metal–catecholamine (MC) complex functionalized monomicelle “modules” that can be conveniently assembled on the 2D supporting blocks (graphene oxide (GO), WS2, and MXene) in the following “assembly” step. After an annealing process, the resultant composites possess a single-layered 2D nanosheet surrounded by two single-layered mesoporous carbon at both sides and exhibit highly ordered mesostructures with large surface areas (~385 m2 g−1), tunable pore sizes (16–25 nm) and highly dispersed metal-containing nanoparticles. Due to the modularity of this assembly process, a range of metal species (Co, Fe, Ni, V, Cu, Pd, FeCo, CoNi, and FeCoNi) can be in-situ incorporated into the 2D mesoporous frameworks, which are partially embedded in the pore walls with the remaining part exposed in the pore channels. Benefiting from the unique textual structures, the resultant GO-derived functional mesoporous carbon nanosheets (Co as the functional species and being annealed at 850 °C) exhibit excellent electrocatalytic activity, long-term stability, and superior methanol tolerance for oxygen reduction reaction, which holds great potential as a catalyst for fuel cells.

Electronic Modulation of Pd/C by Simultaneous Doping of Cu and Co Tendering a Highly Durable and Methanol-Tolerant Oxygen Reduction Electrocatalyst

Pd-based electrocatalysts are considered as suitable replacement for Pt-based ones owing to the similar electronic structure of Pd, relatively low cost, and superior catalytic performance. The activity and utilization efficiency of Pd in electrochemical reactions can be increased by alloying with transition metals, like Cu and Co. Herein, we report the synthesis of a homogeneously embedded Pd2CuCo alloy in the carbon matrix. Compared with the benchmark Pt/C, the as-synthesized Pd alloy electrocatalyst exhibited an improved limiting current density (Jm; −5.65 mA cm–2), a smaller Tafel slope (58.7 mV dec–1), and a comparable onset potential (Eonset; 0.91 V vs RHE). Comparatively, the optimized Pd2CuCo showed a current retention of ∼96% after a 6 h stability test and only a 4 mV loss in the half-wave potential (E1/2) after 10,000 redox cycles, while Pt/C showed a current retention of 72.5% and a loss of 5 mV in E1/2. Meanwhile, the Pd2CuCo alloy electrocatalyst also demonstrated excellent methanol tolerance compared to benchmark Pt/C. In addition, the electrocatalyst showed higher activity and long-term stability toward the formic acid oxidation reaction than Pd/C, signifying the potential for wide applicability.

Nitrogen-doped hierarchical porous carbons derived from biomass for oxygen reduction reaction.

Nowadays biomass has become important sources for the synthesis of different carbon nanomaterials due to their low cost, easy accessibility, large quantity, and rapid regeneration properties. Although researchers have made great effort to convert different biomass into carbons for oxygen reduction reaction (ORR), few of these materials demonstrated good electrocatalytical performance in acidic medium. In this work, fresh daikon was selected as the precursor to synthesize three dimensional (3D) nitrogen doped carbons with hierarchical porous architecture by simple annealing treatment and NH3 activation. The daikon-derived material Daikon-NH3-900 exhibits excellent electrocatalytical performance towards oxygen reduction reaction in both alkaline and acidic medium. Besides, it also shows good durability, CO and methanol tolerance in different electrolytes. Daikon-NH3-900 was further applied as the cathode catalyst for proton exchange membrane (PEM) fuel cell and shows promising performance with a peak power density up to 245W/g.

Locking nitrogen dopants in porous carbons through in situ grafting strategy for enhanced oxygen reduction reactions

We report here the synthesis of N-doped porous carbon (PC) through a convenient melamine pre-grafting strategy. The melamine derivative with a monolayer structure was first grafted on the surface of the micropores of PC using a suitable diazotization reaction of melamine in an aqueous solution. After pyrolysis, PC grafting with melamine derivative was converted to the obtained N-doped PC. Meanwhile, more nitrogen dopants were grafted, and nitrogen functionalities were reconstructed to generate more graphitic N and pyridinic N atoms, in which the mesopores volume was consequently enlarged. Because of the unique structures mentioned above, the as-obtained N-doped PC exhibited enhanced oxygen reduction activity under alkaline compared with the N-doped PC from the standard physical mixture of PC and melamine. Besides, the obtained N-doped PC showed a comparable half-wave potential, remarkable durability, and good methanol tolerance compared with the commercial 20% Pt/C electrocatalyst. The results presented here could guide the development of new and improving metal-free nitrogen-doped porous carbon catalysts toward oxygen reduction reaction.

FeNC Catalysts with High Catalytic Activity and Stability for Oxygen Reduction Reaction

Although Pt-based catalysts have been considered as the most effective electrocatalyst for the cathodic oxygen reduction reaction (ORR) of direct methanol fuel cells (DMFCs), they still suffer from the drawbacks of high cost, poor long-term stability and methanol/ CO poisoning effects. Thus, developing low-cost ORR catalysts with high efficiency, durability and antipoisoning ability is of paramount importance. Herein, a series of non-noble metal FeNC materials are prepared through a facile pyrolysis process and used as the electrocatalysts toward ORR in alkaline electrolyte. Results show that the Fe0.50NC-800-1h catalyst pyrolyzed at 800 ºC for 1 h with the mass ratio of Fe(NO3)3•6H2O to melamine being 0.50 exhibits the highest catalytic performance among the as-prepared FeNC catalysts. The half-wave potential of ORR is ca. 0.81 V, which is only 38 mV lower than that on the noble metal Pt/C catalyst. Besides, it also displays higher stability and methanol tolerance than Pt/C. There is almost no change in the current during the chronoamperometric test when methanol is added in the electrolyte whereas significant decrease is found on Pt/C catalyst. This study of FeNC catalysts provides new insights on understanding the ORR mechanism and suggests a promising strategy to develop low-cost and highly efficient non-noble metal electrocatalysts for ORR.

Core and auxiliary functions of one-carbon metabolism in Pseudomonas putida exposed by a systems-level analysis of transcriptional and physiological responses.

The soil bacterium Pseudomonas putida is a robust biomanufacturing host that assimilates a broad range of substrates while efficiently coping with adverse environmental conditions. P. putida is equipped with functions related to one-carbon (C1) compounds (e.g. methanol, formaldehyde, and formate) oxidation-yet pathways to assimilate these carbon sources are largely absent. In this work, we adopted a systems-level approach to study the genetic and molecular basis of C1 metabolism in P. putida. RNA sequencing identified two oxidoreductases, encoded by PP_0256 and PP_4596, transcriptionally active in the presence of formate. Quantitative physiology of deletion mutants revealed growth defects at high formate concentrations, pointing to an important role of these oxidoreductases in C1 tolerance. Moreover, we describe a concerted detoxification process for methanol and formaldehyde, the C1 intermediates upstream formate. Alcohol oxidation to highly-reactive formaldehyde by PedEH and other broad-substrate-range dehydrogenases underpinned the (apparent) suboptimal methanol tolerance of P. putida. Formaldehyde was mostly processed by a glutathione-dependent mechanism encoded in the frmAC operon, and thiol-independent FdhAB and AldB-II overtook detoxification at high aldehyde concentrations. Deletion strains were constructed and characterized towards unveiling these biochemical mechanisms, underscoring the worth of P. putida for emergent biotechnological applications-e.g. engineering synthetic formatotrophy and methylotrophy. IMPORTANCE C1 substrates continue to attract interest in biotechnology, as their use is both cost-effective and ultimately expected to mitigate the impact of greenhouse gas emissions. However, our current understanding of bacterial C1 metabolism remains relatively limited in species that cannot grow on (i.e., assimilate) these substrates. Pseudomonas putida, a model Gram-negative environmental bacterium, constitutes a prime example of this sort. The biochemical pathways active in response to methanol, formaldehyde, and formate have been largely overlooked-although the ability of P. putida to process C1 molecules has been previously alluded to in the literature. By using a systems-level strategy, this study bridges such knowledge gap through the identification and characterization of mechanisms underlying methanol, formaldehyde, and formate detoxification-including hitherto unknown enzymes that act on these substrates. The results reported herein both expand our understanding of microbial metabolism and lay a solid foundation for engineering efforts toward valorizing C1 feedstocks.

Zinc-Mediated Template Synthesis of Hierarchical Porous N-Doped Carbon Electrocatalysts for Efficient Oxygen Reduction.

The development of highly active and low-cost catalysts for use in oxygen reduction reaction (ORR) is crucial to many advanced and eco-friendly energy techniques. N-doped carbons are promising ORR catalysts. However, their performance is still limited. In this work, a zinc-mediated template synthesis strategy for the development of a highly active ORR catalyst with hierarchical porous structures was presented. The optimal catalyst exhibited high ORR performance in a 0.1 M KOH solution, with a half-wave potential of 0.89 V vs. RHE. Additionally, the catalyst exhibited excellent methanol tolerance and stability. After a 20,000 s continuous operation, no obvious performance decay was observed. When used as the air-electrode catalyst in a zinc-air battery (ZAB), it delivered an outstanding discharging performance, with peak power density and specific capacity as high as 196.3 mW cm-2 and 811.5 mAh gZn-1, respectively. Its high performance and stability endow it with potential in practical and commercial applications as a highly active ORR catalyst. Additionally, it is believed that the presented strategy can be applied to the rational design and fabrication of highly active and stable ORR catalysts for use in eco-friendly and future-oriented energy techniques.

Effect and mechanism of signal peptide and maltose on recombinant type III collagen production in Pichia pastoris.

Recombinant type III collagen plays an important role in cosmetics, wound healing, and tissue engineering. Thus, increasing its production is necessary. After an initial increase in output by modifying the signal peptide, we showed that adding 1% maltose directly to the medium increased the yield and reduced the degradation of recombinant type III collagen. We initially verified that Pichia pastoris GS115 can metabolize and utilize maltose. Interestingly, maltose metabolism-associated proteins in Pichia pastoris GS115 have not yet been identified. RNA sequencing and transmission electron microscopy were performed to clarify the specific mechanism of maltose influence. The results showed that maltose significantly improved the metabolism of methanol, thiamine, riboflavin, arginine, and proline. After adding maltose, the cell microstructures tended more toward the normal. Adding maltose also contributed to yeast homeostasis and methanol tolerance. Finally, adding maltose resulted in the downregulation of aspartic protease YPS1 and a decrease in yeast mortality, thereby slowing down recombinant type III collagen degradation. KEY POINTS: • Co-feeding of maltose improves recombinant type III collagen production. • Maltose incorporation enhances methanol metabolism and antioxidant capacity. • Maltose addition contributes to Pichia pastoris GS115 homeostasis.

Biomass-derived metal-free porous carbon electrocatalyst for efficient oxygen reduction reactions

BackgroundFor better practical application of renewable energy harvesting/storage and conversion systems, like fuel cells, the creation of cheap and effective catalysts for oxygen reduction reaction (ORR) is essential. Electrocatalysts for the oxygen reduction reactions that rely on carbon rather than metal exhibit intriguing catalytic activities, high stabilities, and good tolerance for carbon monoxide and methanol. Therefore, they can be good alternatives for Platinum-based catalysts. MethodsIn this report, nitrogen-doped graphitized carbon-based materials with a huge specific surface area of ∼1563.2 m2/g were created using a simple pyrolysis method. Significant FindingsNitrogen-doped graphitized carbon-based materials as metal-free ORR electrocatalysts exhibited good activity with a number of electron transfer reaching 3.95 and stability exceeding that of conventional Pt/C electrocatalysts in alkaline medium. Excellent ORR performance, ease of preparation, and huge surface area with large N contents all point to the promising potential of the currently fabricated nitrogen-doped graphitized carbon materials in applications ranging from fuel cells to other related technological fields.

Methanol tolerance upgrading of Proteus mirabilis lipase by machine learning-assisted directed evolution

Methanol tolerance upgrading of Proteus mirabilis lipase by machine learning-assisted directed evolution

Single atom iron implanted polydopamine-modified hollow leaf-like N-doped carbon catalyst for improving oxygen reduction reaction and zinc-air batteries

Metal-nitrogen-carbon (MNC) catalysts, especially FeNC catalysts, are considered promising candidates to replace Pt-based catalysts, but FeNC catalysts still present certain challenges in controlled-synthesis and energy device applications. In this paper, through the modification strategy of poly-dopamine (PDA) to maintain 2D leaf morphology to obtain more active sites and further adjust the N content, N-doped porous carbon monatomic iron catalyst (FeSA/NPCs) with rich-nitrogen content was prepared. XPS analysis showed that compared with C-ZIF-Fe, the contents of graphite nitrogen and pyridine nitrogen increased in FeSA/NPCs. The hollow structure with defects and Fe-N4 configuration of Fe single atom show more active sites for the catalyst, and positively promote the diffusion of reactants, oxygen exchange and electron transport, thus changing the reaction kinetics and promoting the improvement of ORR activity. FeSA/NPCs electrocatalyst exhibits good half-wave potential and onset potential at low loading (E1/2 = 0.93 V, Eonset = 1.0 V). In addition, the methanol tolerance, stability and Tafel slope are better than those of commercial Pt/C. Excitingly, the zinc-air cell with FeSA/NPCs as cathode material achieves a power density of 223 mW cm−2 and exhibits a long-term stability higher than 200 h. This work shows that nitrogen-doped porous carbon materials as well as iron monoatoms play important roles in improving electrocatalytic performance.

Two-Dimensional Covalent Framework Derived Nonprecious Transition Metal Single-Atomic-Site Electrocatalyst toward High-Efficiency Oxygen Reduction

Designing an active, stable, and nonprecious metal catalyst substitute for Pt in the oxygen reduction reaction (ORR) is highly demanded for energy-efficient and cost-effective prototype devices. Single-atomic-site catalysts (SASCs) have been widely concerning because of their maximum atomic utilization and precise structural regulation. Despite being challenging, the controllable synthesis of SASCs is crucial for optimizing ORR activity. Here, we demonstrate an ultrathin organometallic framework template-assisted pyrolysis strategy to synthesize SASCs with a unique two-dimensional (2D) architecture. Electrochemical measurements revealed that Fe-SASCs displayed an excellent ORR activity in an alkaline media, having a half-wave potential and a diffusion-limited current density comparable to those of commercial Pt/C. Remarkably, the durability and methanol tolerance of Fe-SASCs were even superior to those of Pt/C. Furthermore, Fe-SASCs displayed a maximum power density of 142 mW cm-2 with a current density of 235 mA cm-2 as a cathode catalyst in a zinc-air battery, showing its great potential for practical applications.

Pt-Fe-Co Ternary Metal Single Atom Catalyst for toward High Efficiency Alkaline Oxygen Reduction Reaction

Single-atom catalysts (SACs) within carbon matrix became one of the most promising alternatives to noble metal-based catalysts for oxygen reduction reaction (ORR). Although SACs have significant benefits in reducing the total catalyst cost, it also has the disadvantages of weak interaction between atoms and poor stability. Hence, there is still much room for improvement for the catalyst activity. In response, we designed a Fe-Co-Pt ternary metal single atom catalyst anchored on covalent organic framework (COF)-derived N-doped carbon nanospheres (Pt, Fe, Co/N-C). Due to effective charge transfer between Pt single atom and neighboring Fe-Co components, an intense electron interaction can be established within the Pt, Fe, Co/N-C catalyst. This is beneficial for enhancing charge transfer efficiency, modulating d electronic structure of Pt center and weakening oxygen intermediate adsorption, thus distinctly accelerating ORR catalytic kinetics. As expected, the half-wave potential of Pt, Fe, Co/N-C was 0.845 V, much higher than those of commercial 20 wt% Pt/C (0.835 V), Pt/N-C (0.79 V) and Fe, Co/N-C (0.81 V) counterparts. Moreover, the Pt, Fe, Co/N-C catalyst demonstrated much-improved cycling stability and methanol tolerance.

Defect-Engineered Mesoporous Undoped Carbon Nanoribbons for Benchmark Oxygen Reduction Reaction.

For large-scale fuel cell applications, it is significant to replace expensive Pt-based oxygenreductionreaction (ORR) electrocatalysts with nonprecious metal- or metal-free carbon-based catalysts with high activity. However, it is still challenging to deeply understand the role of intrinsic defects and the origin of ORR activity in pure nanocarbon. Therefore, a novel self-assembly and a pyrolysis strategy to fabricate defect-rich mesoporous carbon nanoribbons are presented. Due to the effective regulation of nanoarchitecture, a vast number of defective catalytic sites (edge defects and holes) are exposed, which thereby enhances the electron transfer kinetics and catalytic activity. Such undoped nanoribbons display a large half-wave potential of 0.837V, excellent long-term stability, and exceptional methanol tolerance, surpassing the most undoped ORR catalysts and the commercial Pt/C (20wt.%) catalyst. Structural characterizations and density functional theory (DFT) calculations confirm that the zigzag edge defects and the armchair pentagon at the hole defect are responsible for outstanding ORR performance.

Tailoring MOF structure via iron decoration to enhance ORR in alkaline polymer electrolyte membrane fuel cells

Fe-N-C catalysts were synthesized by combining a Zn-based zeolitic imidazolate framework (ZIF-8) structure, adopted as a nitrogen-carbon template, with an iron salt and conductive carbon support followed by a thermal treatment. The effect of three different pyrolysis temperatures (700, 900, and 1000 °C) on Zn removal from ZIF-8 was investigated to enhance the formation of Fe-based moieties in the Nx-C groups during carbonization. Electrochemical characterization using a rotating ring disk electrode in an alkaline electrolyte demonstrated that ORR activity increased as the pyrolysis temperature increased. This trend can be ascribed to a more effective Zn removal and formation of high-active iron- and nitrogen-based catalytic sites, as pointed out by the Fe-N-C materials' chemical surface analysis after the pyrolysis step. The sample Fe-N-C-1000 demonstrated a remarkable ORR activity, even higher than Pt/C taken as reference.When subjected to accelerated stress tests, the Fe-N-C-1000 sample displayed higher performance durability over a long cycling duration (30,000 cycles) compared to Pt/C taken as control. Tests in the AEMFC fed with H2 showed that the performance of the Fe-N-C-1000 catalyst was competitive (OCV = 0.98 vs. 1.05 V, 149 vs. 148 mW cm−2) compared to the state-of-the-art Pt/C electrode, using a FUMASEP® FAA-3-50 membrane. The material found an application also in alkaline direct methanol fuel cell (ADMFC) fed with methanol solutions at high concentrations (up to 10 M) due to a high methanol tolerance, as pointed out by rotating disk electrode experiments.

FeCo alloy encapsulated in N-doped carbon shell for efficient oxygen reduction reaction

This work reports the synthesis of FeCo alloy encapsulated in N-doped carbon shell for efficient oxygen reduction reaction (ORR). The FeCoNC-0.3compound were synthesized by high temperature pyrolysis of ZIF-L with the assistance of different Fe salts (i.e., FeCl3·6H2O, FeSO4·7H2O, K3Fe(CN)6, Fe(NH4)2·(SO4)2·6H2O and (NH4)3·Fe(C2O4)3·3H2O). With the presence of FeCl3·6H2O, FeSO4·7H2O, Fe(NH4)2·(SO4)2·6H2O and (NH4)3·Fe(C2O4)3·3H2O during the pyrolysis process, FeCo alloys are formed and more nitrogen elements are remained after high temperature pyrolysis compared with that in CoNC derived from pure ZIF-L. Differently, the introduction of K3Fe(CN)6 cannot lead to the generation of FeCo alloy and less nitrogen elements are remained after high temperature pyrolysis in comparison with that in CoNC. Linear relationship between the ORR onset potential and the ID/IG value of the FeCoNC-0.3compound catalysts are observed. Besides, the onset potential also increases linearly with the increase of the total content of pyridinic-N + graphitic-N + Fe(Co)-Nx. These results suggest that high content of carbon defects and high content of pyridinic-N, graphitic-N and Fe(Co)-Nx are beneficial for the improvement of the catalytic activities of the FeCoNC-0.3compound catalysts. Among all the as-prepared samples, FeCoNC-0.3FeCl3 demonstrates the highest catalytic activity towards ORR due to its unique core–shell structure with a carbon layer as the shell and FeCo alloy as the core, hierarchical channels, large pore volume, high content of carbon defects and high total content of pyridine-N, graphite-N and Fe(Co)-Nx. FeCoNC-0.3FeCl3 displays an onset potential of 0.97 V and half-wave potential of 0.82 V, which are comparable to the commercial Pt/C (onset potential of 1.05 V, half-wave potential of 0.86 V). Moreover, FeCoNC-0.3FeCl3 demonstrates much higher durability and methanol tolerance compared with Pt/C. Zn-air battery with FeCoNC-0.3FeCl3 as the cathode catalyst demonstrates maximum power density of 105 mW cm−2, which is close to that with Pt/C as the cathode catalyst (127 mW cm−2).

Co3O4 Supported on Graphene-like Carbon by One-Step Calcination of Cobalt Phthalocyanine for Efficient Oxygen Reduction Reaction under Alkaline Medium

Exploiting cost-effective and durable non-platinum electrocatalysts for oxygen reduction reaction (ORR) is of great significance for the development of abundant renewable energy conversion and storage technologies. Herein, a series of Co3O4 supported on graphene-like carbon (Co3O4/C) samples were firstly effectively synthesized by one-step calcination of cobalt phthalocyanine and their electrocatalytic performances were measured for ORR under an alkaline medium. By systematically adjusting the calcination temperature of cobalt phthalocyanine, we found that the material pyrolyzed at 750 °C (Co3O4/C-750) shows the best ORR electrocatalytic performance (half-wave potentials of 0.77 V (vs. RHE) in 0.1 M KOH) among all the control samples. Moreover, it displays better stability and superior methanol tolerance than commercial 20% Pt/C. The further electrochemical test results reveal that the process is close in characteristics to the four-electron ORR process on Co3O4/C-750. In addition, Co3O4/C-750 applied in the zinc-air battery presents 1.34 V of open circuit potential. Based on all the characterizations, the enhanced electrocatalytic performances of Co3O4/C-750 composite should be ascribed to the synergistic effect between Co3O4 and the graphene-like carbon layer structure produced by pyrolysis of cobalt phthalocyanine, as well as its high specific surface area.

Core-shell Fe/Fe3C heterostructure@carbon layers anchored on N-doped porous carbon for boosting oxygen reduction reaction

It is still challenging but crucial to plumb non-noble metal-based oxygen reduction reaction (ORR) catalysts with comparable or better performance than benchmark Pt/C catalysts. Herein, we proffer an unconventional core-shell-structured iron-based heterostructure electrocatalyst constructed by a Fe/Fe3C heterostructure nanoparticle core wrapped by a graphitic shell embedded on a conductive N-doped mesoporous graphite skeleton (Fe/Fe3C@NC) via facile pyrolysis of MIL-53(Fe) (MIL = Matérial Institute Lavoisier) and melamine. The Fe/Fe3C@NC catalyst delivers more positive half-wave potential (E1/2) of 0.86 V and a low Tafel slope of 56 mV dec−1 for ORR, outpacing the benchmark Pt/C catalyst, and it also shows remarkable long-term durability and excellent methanol tolerance. The marvelous ORR behaviors can be attributed to its distinctive morphologic structure: the heterostructure can enhance intrinsic ORR activity; the core-shell nanostructure can enhance ORR activities through unique electron transfer between iron species and their conductive carbon shells, which can also act as protective barriers to ensure long-term stability; the high-content pyridinic-N doping can be used as additional active centers; and the abundant mesopores facilitate the diffusion of electrolyte, which can further upgrade ORR activities. This study proffers a strategy to design and fabricate non-noble catalysts with well-designed nanoarchitecture and high catalytic activity.

Rational Fabrication of Defect-Rich and Hierarchically Porous Fe-N-C Nanosheets as Highly Efficient Oxygen Reduction Electrocatalysts for Zinc-Air Battery.

The rational design of morphology and structure for oxygen reduction reaction (ORR) catalysts still remains a critical challenge. Herein, we successfully construct defect-rich and hierarchically porous Fe-N-C nanosheets (Fe-N-CNSs), by taking advantage of metal-organic complexation and a mesoporous template. Benefiting from the advantages of high density of active sites, fast mass transfer channels, and sufficient reaction area, the optimal Fe-N-CNSs demonstrate satisfactory ORR activity with an excellent half-wave potential of up to 0.87 V, desirable durability, and robust methanol tolerance. Noteworthy, the Fe-N-CNSs based zinc-air battery shows significant performance with a peak power density of 128.20 mW cm-2 and open circuit voltage of 1.53 V, which reveals that the Fe-N-CNSs catalysts present promising practical application prospects. Therefore, we believe that this research will provide guidance for the optimization of Fe-N-C materials.

BN/Cu/CNT nanoparticles as an efficient tri-functional electrocatalyst for ORR and OER

Preparing economic, stable, and highly efficient non-precious-metal materials for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is of great significance to the development of storage technologies and energy conversion. In this manuscript, we report a novel Cu based nano-catalyst as an electrode material fabricated by complexation-reduction method. Benefit from the stable of h-NB and the good electrical conductivity of CNT, the tri-functional electrocatalyst BN/Cu/CNT displays enhanced activity towards ORR and with the high current density of 0.95 mA/cm2, which is comparable to that of commercial Pt/C catalyst (cathodic peak current: 1.05 mA/cm2). The BN/Cu/CNT also demonstrates high catalyst activity for the OER. From the rotating disk electrode and rotating ring-disk electrode tests, the number of electrons exchanged during the ORR is revealed to be 3.92, suggesting a 4e− pathway of O2 reduction to H2O. The as prepared catalyst also has good stability and superior methanol tolerance to the commercial Pt/C catalyst in alkaline medium. Thus, it is anticipated that the BN/Cu/CNT catalyst is surely helpful for providing a new space to develop Pt-free catalyst.