Metals In PM2 Research Articles

Analysis of Voltammetric Data for the Evaluation of Seasonal Changes of the Ni, Cd, Pb and Cu Content in Atmospheric Particulate PM2.5

In this paper, the preliminary results of a study on concentration of heavy metals in PM2.5 (atmospheric particles with aerodynamic diameter less than 2.5 microm) fractions of atmospheric particulate matter, sampled in Milan, are presented. This work aims to develop an electroanalytical method to analyse Pb, Cu, Cd and Ni in PM2.5 and to investigate seasonal and weekly trends in the amount of PM2.5 and its composition for considered metals. The samples have been selected within the seasons ranging from September 2002 to November 2003 so that they represent the possible seasonal changes; the samples within this period have been chosen in order to have data relevant to both working days and holidays. The determination of Cd, Pb and Cu has been carried out by Differential Pulse Anodic Stripping Voltammetry, whereas the concentration of Ni has been determined by Differential Pulse Adsorptive Cathodic Stripping Voltammetry. The concentrations of the metals in the sampled atmosphere and in the PM2.5 have been evaluated; through ANOVA possible seasonal or weekly variations in the above cited concentrations have been investigated.

Special and seasonal variations of trace metals in PM10 in Chongqing

Nineteen trace metals in PM10 were measured by X-ray fluorescence spectroscopy (XRF) at three sites in Chongqing. The special and seasonal variations of trace metals in PM10 samples collected in the downtown were different from those in the background area of Jinyunshan. The source identification indicated that particulate materials were contributed mainly by two sources.

The effect of refurbishing a UK steel plant on PM10 metal composition and ability to induce inflammation

BackgroundIn the year 2000 Corus closed its steel plant operations in Redcar, NE of England temporarily for refurbishment of its blast furnace. This study investigates the impact of the closure on the chemical composition and biological activity of PM10 collected in the vicinity of the steel plant.MethodsThe metal content of PM10 samples collected before during and after the closure was measured by ICP-MS in order to ascertain whether there was any significant alteration in PM10 composition during the steel plant closure. Biological activity was assessed by instillation of 24 hr PM10 samples into male Wistar rats for 18 hr (n = 6). Inflammation was identified by the cellular and biochemical profile of the bronchoalveolar lavage fluid. Metal chelation of PM10 samples was conducted using Chelex beads prior to treatment of macrophage cell line, J774, in vitro and assessment of pro-inflammatory cytokine expression.ResultsThe total metal content of PM10 collected before and during the closure period were similar, but on reopening of the steel plant there was a significant 3-fold increase (p < 0.05) compared with the closure and pre-closure samples. Wind direction prior to the closure was predominantly from the north, compared to south westerly during the closure and re-opened periods. Of metals analysed, iron was most abundant in the total and acid extract, while zinc was the most prevalent metal in the water-soluble fraction. Elevated markers of inflammation included a significant increase (p < 0.01) in neutrophil cell numbers in the bronchoalveolar lavage of rats instilled with PM10 collected during the reopened period, as well as significant increases in albumin (p < 0.05). Extracts of PM10 from the pre-closure and closure periods did not induce any significant alterations in inflammation or lung damage. The soluble and insoluble extractable PM10 components washed from the reopened period both induced a significant increase in neutrophil cell number (p < 0.05) when compared to the control, and these increases when added together approximately equalled the inflammation induced by the whole sample. PM10 from the re-opened period stimulated J774 macrophages to generate TNF-α protein and this was significantly prevented by chelating the metal content of the PM10 prior to addition to the cells.ConclusionPM10-induced inflammation in the rat lung was related to the concentration of metals in the PM10 samples tested, and activity was found in both the soluble and insoluble fractions of the particulate pollutant.

Transition Metals in Personal Samples of PM2.5 and Oxidative Stress in Human Volunteers

Ambient particulate matter (PM) has been associated with increased risk of lung cancer. One proposed mechanism is that PM induces oxidative stress mediated by transition metals contained within this mixture. We examined the relationship between the personal exposure to water-soluble transition metals in PM(2.5) and oxidative DNA damage. In 49 students from central Copenhagen, we determined PM(2.5) exposure by personal sampling twice in 1 year, and measured in these PM(2.5) samples the concentration of the soluble transition metals vanadium, chromium, iron, nickel, copper, and platinum. Collected lymphocytes and 24-hour urine samples were analyzed for DNA damage in terms of 7-hydro-8-oxo-2'-deoxyguanosine (8-oxodG). We found that the 8-oxodG concentration in lymphocytes was significantly associated with the vanadium and chromium concentrations with a 1.9% increase in 8-oxodG per 1 microg/L increase in the vanadium concentration and a 2.2% increase in 8-oxodG per 1 microg/L increase in the chromium concentration. We have previously reported that in this study population the personal exposure to PM(2.5) was associated with an increase in 8-oxodG in lymphocytes. However, vanadium and chromium were associated with the 8-oxodG concentration in lymphocytes independently of the PM(2.5) mass concentration. The four other transition metals were not associated with 8-oxodG in lymphocytes and none of the transition metals was significantly associated with 8-oxodG in urine. Our results could indicate that vanadium and chromium present in PM(2.5) have an effect on oxidative DNA damage that is independent of particle mass and/or other possible toxic compounds contained within this particulate mixture.

Emissions of Metals Associated with Motor Vehicle Roadways

Emissions of metals and other particle-phase species from on-road motor vehicles were measured in two tunnels in Milwaukee, WI during the summer of 2000 and winter of 2001. Emission factors were calculated from measurements of fine (PM2.5) and coarse (PM10) particulate matter at tunnel entrances and exits, and effects of fleet composition and season were investigated. Cascade impactors (MOUDI) were used to obtain size-resolved metal emission rates. Metals were quantified with inductively-coupled plasma mass spectrometry (ICP-MS) and X-ray fluorescence (XRF). PM10 emission rates ranged from 38.7 to 201 mg km(-1) and were composed mainly of organic carbon (OC, 30%), inorganic ions (sulfate, chloride, nitrate, ammonium, 20%), metals (19%), and elemental carbon (EC, 9.3%). PM10 metal emissions were dominated by crustal elements Si, Fe, Ca, Na, Mg, Al, and K, and elements associated with tailpipe emissions and brake and tire wear, including Cu, Zn, Sb, Ba, Pb, and S. Metals emitted in PM2.5 were lower (11.6% of mass). Resuspension of roadway dust was dependent on weather and road surface conditions, and increased emissions were related to higher traffic volumes and fractions of heavy trucks. Emission of noble metals from catalytic converters appeared to be impacted by the presence of older vehicles. Elements related to brake wear were impacted by enriched road dust resuspension, but correlations between these elements in PM2.5 indicate that direct brake wear emissions are also important. A submicrometer particle mode was observed in the emissions of Pb, Ca, Fe, and Cu.

Application of capillary electrophoresis combined with a modified BCR sequential extraction for estimating of distribution of selected trace metals in PM 2.5 fractions of urban airborne particulate matter

The capillary electrophoresis (CE) method combined with a sequential extraction was applied to determine the distribution of Fe, Zn, Cu, Mn and Cd in urban ambient air PM 2.5 samples. PM 2.5 was collected on Teflon filters with dichotomous sampler, and the modified extraction procedure following the BCR leaching procedure was used to chemically fractionate metals into “easily exchangeable” with water, “acid extractable” with 0.11 mol/l acetic acid, “reducible” with 0.1 mol/l hydroxylamine hydrochloride acidified to pH 2.0 with nitric acid, and “oxidisable” with oxidation by 8.8 mol/l hydrogen peroxide (H 2O 2) followed by extraction with 1.0 mol/l ammonium acetate. Based on the obtained results it was concluded that the application of the studied methodology provides chemical fractionation data that reflect the general sources and potential health hazards of the studied metals.

Metal-rich ambient particles (particulate matter 2.5) cause airway inflammation in healthy subjects.

Epidemiologic studies have shown an increased prevalence of allergic asthma in children living in a German smelter area (Hettstedt) compared with a cohort who live in a nonindustrialized area (Zerbst). However, it is not known whether ambient particles (particulate matter(2.5) [PM(2.5)]) from these areas induce distinct lung inflammation, which might be an explanation for this difference. Therefore, 100 microg of PM(2.5) suspensions, collected simultaneously in the two areas, were instilled through a bronchoscope into contralateral lung segments of 12 healthy volunteers. PM(2.5) from both Hettstedt and Zerbst increased the number of leukocytes in the bronchoalveolar lavage performed 24 hours later. PM(2.5) from Hettstedt, but not Zerbst, induced a significant influx of monocytes (Hettstedt: 7.0% vs. Zerbst: 4.3%) without influencing the expression of surface activation markers on monocytes and alveolar macrophages. Oxidant radical generation of bronchoalveolar lavage cells and cytokine concentration (interleukin-6 and tumor necrosis factor-alpha) in bronchoalveolar lavage fluid was significantly increased after instillation of Hettstedt PM(2.5). We conclude that environmentally relevant concentrations of PM(2.5) from the smelter area induced distinct airway inflammation in healthy subjects with a selective influx of monocytes and increased generation of oxidant radicals. The higher concentration of transition metals in PM(2.5) from Hettstedt might be responsible for this increased inflammation.

Concentrations and distribution of trace metals of PM10 and TSP particles collected in the qingdao area

Aerosol samples of PM10 (particulate matter with aerodynamic diameters less than 10μm) and TSP (total suspended particles) were simultaneously collected from April 2001 to March 2002 at the top of Mount Baguan on the downtown campus of Ocean University of China, Qingdao, China. The concentrations of Al, Fe, Mn, Cu, Pb and Zn were determined by means of inductively coupled plasma atomic emission spectrometry (ICP-AES). The monthly variability of the mass concentrations of aerosol particles and the concentrations of trace metals are presented and discussed. The distribution pattern of these metals in PM10 and TSP is also discussed. During the observation period, the mass concentration of PM10 at this site ranged from 13.80 to 306.42 μgm−3, while that of TSP ranged from 31.02 to 568.82μgm−3. Both PM10 and TSP reached their highest concentrations in springtime, while the lowest values occurred in summertime. The concentrations of crustal metals followed the same variation pattern, while those of anthropogenic metals did not. A closer examination led to the conclusion that anthropogenic metals are mainly from local sources. The average concentration ratios of anthropogenic metals in PM10 to TSP were higher than the average mass ratio of PM10 to TSP, suggesting that there was a higher proportion of anthropogenic metals on smaller particles although there were a few exceptions. For crustal metals, however, the metal concentration ratios were close to the particle mass ratio, indicating that the distribution of crustal metals was much more homogeneous on aerosol particles with different sizes. The correlation analysis indicated that Al, Fe and Mn were originated from similar sources and were mainly controlled by the particle mass, while Cu, Pb and Zn were predominated by local anthropogenic sources, with Pb and Zn having similar origins.

Characterization of chemical species in PM 2.5 and PM 10 aerosols in suburban and rural sites of central Taiwan

Aerosol samples for PM 2.5 (particulate matter with aerodynamic diameters less than 2.5 μm), PM 2.5–10 (particulate matter with aerodynamic diameters between 2.5 and 10 μm) and TSP were collected from June to September 1998 at THU (suburban) and HKIT (rural) sites in central Taiwan. The ratios of PM 2.5/PM 10 averaged 0.70 for the daytime and 0.63 for the nighttime at THU, respectively. At HKIT, the PM 2.5/PM 10 ratios averaged 0.56 for the daytime and 0.72 in the nighttime, respectively. These results indicated that the PM 2.5 concentrations contribute the majority of the PM 10 concentration and PM 10 concentrations contribute the majority of the TSP at both sites. The averaged PM 2.5 concentrations at THU are higher than those measured at HKIT during the daytime period. However, the average PM 2.5–10 concentrations in THU are lower than those measured at HKIT during nighttime. The samples collected were also analyzed by atomic absorption spectrophotometry for the elemental analysis of Ca, Fe, Pb, Zn, Cu, Mn and Cr. Meanwhile ion chromatography was used to analyze for the water-soluble ions: sulphate, nitrate and chloride in the Universal samples. The concentrations of heavy metals in PM 10 during daytime were all higher than nighttime at THU. However, the averaged concentrations of metal elements in PM 10 during day and night period were distributed irregularly at HKIT. The results indicated that for metal elements collected at HKIT have different emission sources. The concentrations of metal elements during daytime in PM 10 at THU were generally higher than HKIT. The phenomena owing to the averaged PM 2.5 particle concentrations at THU (suburban) were higher than those measured at HKIT (rural) and PM 2.5 occupied the major portions of PM 10 for both sites during the day period. For anion species, there are no significant differences between day and night period in PM 10 concentrations at both suburban and rural sites.

Wear resistance of PM metals and dependence on surface topography : P. Keldsteen (Danfoss AS, Nordborg, Denmark)

Wear resistance of PM metals and dependence on surface topography : P. Keldsteen (Danfoss AS, Nordborg, Denmark)

Aluminium Powder Metallurgy in Perspective

Abstract The considerable upsurge of interest in the development of PM aluminium alloys in the past 10 years is examined against the background of commercial aluminium powder production. Although it is likely that PM will remain a relatively small but highly specialized proportion of the total consumption of aluminium powder, which has numerous large scale uses, it is expected that it will grow in its share of the total of PM metals. The pressure for these developments has come largely from the potential consuming industries. It has created a need for radical departures from the more orthodox powder pressing and sintering techniques. It has produced more highly developed powder making processes and a much wider range of subsequent fabricating techniques. Rapid solidification technology, metal matrix composites, and mechanical alloying, for example, combined with powder extrusion, rolling, and forging, are presenting opportunities for creating new alloys and forms of material with tailormade properties mor...

2 - Immune Aspects of Pernicious Anaemia and Atrophic Gastritis

The aim of the present study was to investigate the potential sources of heavy metals in fine air particles (PM2.5) and benzene, toluene, ethylbenzene, and isomeric xylenes (BTEX) in gas phase indoor air. PM2.5 samples were collected using a low volume sampler. BTEX samples were collected using passive sampling onto sorbent tubes and analyzed using gas chromatography-mass spectrometry (GC-MS). For the lower and upper floors of the evaluated building, the concentrations of PM2.5 were 96.4 ± 2.70 μg/m3 and 80.2 ± 3.11 μg/m3, respectively. The compositions of heavy metals in PM2.5 were predominated by iron (Fe), zinc (Zn), and aluminum (Al) with concentration of 500 ± 50.07 ng/m3, 466 ± 77.38 ng/m3, and 422 ± 147.38 ng/m3. A principal component analysis (PCA) showed that the main sources of BTEX were originated from vehicle emissions and exacerbate because of temperature variations. Hazard quotient results for BTEX showed that the compounds were below acceptable limits and thus did not possess potential carcinogenic risks. However, a measured output of lifetime cancer probability revealed that benzene and ethylbenzene posed definite carcinogenic risks. Pollutants that originated from heavy traffic next to the sampling site contributed to the indoor pollution.