Metal-organic Polyhedra Research Articles

Transformation of Type III to Type II Porous Liquids by Tuning Surface Rigidity of Rhodium(II)-Based Metal-Organic Polyhedra for CO2 Cycloaddition.

Porous liquids (PLs), a summation of porous hosts and bulky solvents bestowing permanent cavities, are the prominent emerging materials. Despite great efforts, exploration of porous hosts and bulky solvents is still needed to develop new PL systems. Metal-organic polyhedra (MOPs) with discrete molecular architectures can be considered as porous hosts; however, many of them are insoluble entities. Here we report the transformation of type III PL to type II PLs by tuning the surface rigidity of insoluble MOP, Rh24L24, in a bulky ionic liquid (IL). Functionalization of N-donor molecules on Rh-Rh axial sites ensue their solubilization in bulky IL which confer type II PLs. Experimental and theoretical studies reveal the bulkiness of IL as per the cage apertures, and the cause of their dissolution as well. The obtained PLs, capturing more CO2 than neat solvent, have depicted higher catalytic activity for CO2 cycloaddition compared to individual MOPs and IL.

Sulfonate-Functionalized Polyoxovanadate-Based Metal-Organic Polyhedra for Enhanced Proton Conduction via the Synergy of Linker and Metal Cluster Vertex

Metal-organic polyhedra (MOPs) have emerged as novel porous platforms for proton conduction, however, the concerted employment of both linker and metal cluster vertex is rarely applied for the fabrication of MOPs-based high conducting materials. Herein we report the synthesis of sulfonate-functionalized polyoxovanadate-based MOPs for enhanced proton conduction via the synergistic effect from linker and metal cluster node. MOPs 1 and 2 exhibit octahedral cage configuration constructed from {V5O9Cl} vertex and 5-sulfoisophthalate linker. Owing to the ordered packing of octahedral cages along three axes, 3D interpenetrated open channels that are lined with high-density sulfonates are thus formed within 2. Coupled with the proton-conductive {V5O9Cl} vertexs as well as protonated counterions, an extensive H-bonded network is therefore generated for facile proton transfer. 2 exhibits high proton conductivity of 3.02×10−2 S cm−1 at 65 °C under 90% RH, recording the highest value for MOPs pellet sample. This value is enhanced ~1 order of magnitude compared with that of carboxylate-functionalized analogue 3, clearly illustrating the advantage of combining linker and metal cluster node for enhanced proton conduction. This work will further promote the exploitation of high proton conductive MOPs-based materials by the synergy design strategy.

Water-Soluble Ionic Metal-Organic Polyhedra as a Versatile Platform for Enzyme Bio-immobilization.

Metal-organic polyhedra (MOPs) can act as elementary structural units for the design of modular porous materials; however, their association with biological systems remains greatly restricted by their typically low stabilities and solubilities in water. Herein, we describe the preparation of novel MOPs bearing either anionic or cationic groups and exhibiting a high affinity for proteins. Simple mixing of the protein bovine serum albumin (BSA) and ionic MOP aqueous solutions resulted in the spontaneous formation of MOP-protein assemblies, in a colloidal state or as solid precipitates depending on the initial mixing ratio. The versatility of the method was further illustrated using two enzymes, catalase and cytochrome c, with different sizes and isoelectric points (pI's) below and above 7. This mode of assembly led to the high retention of catalytic activity and enabled recyclability. Furthermore, the co-immobilization of cytochrome c with highly charged MOPs resulted in a substantial 44-fold increase of its catalytic activity.

Ionic Radius Dependent Kinetic Behavior for the Self‐Assemblyand Chiral Amplification of Lanthanide Tetrahedral Cages

Comprehensive SummaryUnderstanding the kinetic process during the self‐assembly and chiral amplification of metal‐organic polyhedra (MOPs) is critical for the rational preparation of chiral MOPs. Herein, we report the ionic radius dependent kinetic processes for the self‐assembly and chiral amplification of Ln4L4‐type (Ln, Lanthanides; L, ligand) lanthanide tetrahedral cages. The chiral Eu4(LR)4 tetrahedral cage is structurally characterized by nuclear magnetic resonance (NMR), electrospray ionization time‐of‐flight mass spectrometry (ESI‐TOF‐MS), and single crystal X‐ray diffraction. Kinetic study on the stereo‐controlled self‐assembly of circularly polarized luminescence (CPL)‐active Ln4(LR)4 (Ln = LaIII, PrIII and EuIII) tetrahedra manifests that the larger ionic radius of Ln leads to faster assembly rates. Mixed‐ligand cage assembly experiments with chiral LR/S, achiral Lac and Ln (1 : 3 : 4 molar ratio) reveal that the self‐assembly and chiral amplification occur synchronously for the LaIII and PrIII cages, while two distinct steps, i.e., first self‐assembly and then chiral amplification, are observed for the EuIII cage. Such distinct kinetic behavior is attributed to different ligands exchange rates among the mixed‐ligand Ln4L4 cages. This work provides fundamental guidance for fabrication and property‐optimization of chiral lanthanide‐based molecular materials.

Ammonia Capture in Rhodium(II)-Based Metal-Organic Polyhedra via Synergistic Coordinative and H-Bonding Interactions.

Ammonia (NH3) is among the world's most widely produced bulk chemicals, given its extensive use in diverse sectors such as agriculture; however, it poses environmental and health risks at low concentrations. Therefore, there is a need for developing new technologies and materials to capture and store ammonia safely. Herein, we report for the first time the use of metal-organic polyhedra (MOPs) as ammonia adsorbents. We evaluated three different rhodium-based MOPs: [Rh2(bdc)2]12 (where bdc is 1,3-benzene dicarboxylate); one functionalized with hydroxyl groups at its outer surface [Rh2(OH-bdc)2]12 (where OH-bdc is 5-hydroxy-1,3-benzene dicarboxylate); and one decorated with aliphatic alkoxide chains at its outer surface [Rh2(C12O-bdc)2]12 (where C12O-bdc is 5-dodecoxybenzene-1,3-benzene dicarboxylate). Ammonia-adsorption experiments revealed that all three Rh-MOPs strongly interact with ammonia, with uptake capacities exceeding 10 mmol/gMOP. Furthermore, computational and experimental data showed that the mechanism of the interaction between Rh-MOPs and ammonia proceeds through a first step of coordination of NH3 to the axial site of the Rh(II) paddlewheel cluster, which triggers the adsorption of additional NH3 molecules through H-bonding interaction. This unique mechanism creates H-bonded clusters of NH3 on each Rh(II) axial site, which accounts for the high NH3 uptake capacity of Rh-MOPs. Rh-MOPs can be regenerated through their immersion in acidic water, and upon activation, their ammonia uptake can be recovered for at least three cycles. Our findings demonstrate that MOPs can be used as porous hosts to capture corrosive molecules like ammonia, and that their surface functionalization can enhance the ammonia uptake performance.

Landau theory and self-assembly of spherical nanoclusters and nanoparticles with octahedral symmetry

Spherical nanoclusters and nanoparticles are rising materials whose functional design provides many useful applications ranging from catalysis, molecular sensing, gas storage to drug targeting and delivery. Here, we develop phenomenological crystallization theory of such spherical structures with octahedral symmetries O and O_h. Within the developed theory, we propose a method, which is based on constructing irreducible octahedral density functions and allows to predict the positions of structural units in the spherical nanoobjects. The proposed theory explains the structures of the simplest known metal nanoclusters, some metal-organic polyhedra and membrane protein polyhedral nanoparticles, and also predicts more complex chiral spherical structures and achiral assemblies characterized by the geometry of semiregular polyhedra. A relationship between the constructed irreducible octahedral functions and spherical lattices, obtained by mapping a plane hexagonal order onto a spherical surface through an octahedron net, is discussed as well.

Efficient water-based purification of metal-organic polyhedra by centrifugal ultrafiltration.

An efficient water-based purification strategy for metal-organic polyhedra (MOPs) using commercially available centrifugal ultrafiltration membranes was developed. Having a diameter above 3 nm, MOPs were almost fully retained by the filters, while free ligands and other impurities were washed away. MOP retention also enabled efficient counter-ion exchange. This method paves the way for the application of MOPs with biological systems.

Stepwise assembly of heterometallic, heteroleptic "triblock Janus-type" metal-organic polyhedra.

Increasing the chemical complexity of metal-organic cages (MOCs) or polyhedra (MOPs) demands control over the simultaneous organization of diverse organic linkers and metal ions into discrete caged structures. Herein, we show that a pre-assembled complex of the archetypical cuboctahedral MOP can be used as a template to replicate such caged structure, one having a "triblock Janus-type" configuration that is both heterometallic and heteroleptic.

Control of evolution of porous copper-based metal-organic materials for electroreduction of CO2 to multi-carbon products.

Electrochemcial reduction of CO2 to multi-carbon (C2+) products is an important but challenging task. Here, we report the control of structural evolution of two porous Cu(ii)-based materials (HKUST-1 and CuMOP, MOP = metal-organic polyhedra) under electrochemical conditions by adsorption of 7,7,8,8-tetracyanoquinodimethane (TNCQ) as an additional electron acceptor. The formation of Cu(i) and Cu(0) species during the structural evolution has been confirmed and analysed by powder X-ray diffraction, and by EPR, Raman, XPS, IR and UV-vis spectroscopies. An electrode decorated with evolved TCNQ@CuMOP shows a selectivity of 68% for C2+ products with a total current density of 268 mA cm-2 and faradaic efficiency of 37% for electrochemcial reduction of CO2 in 1 M aqueous KOH electrolyte at -2.27 V vs. RHE (reversible hydrogen electrode). In situ electron paramagnetic resonance spectroscopy reveals the presence of carbon-centred radicals as key reaction intermediates. This study demonstrates the positive impact of additional electron acceptors on the structural evolution of Cu(ii)-based porous materials to promote the electroreduction of CO2 to C2+ products.

Multivariate metal-organic frameworks generated through post-synthetic modification: impact and future directions.

Reticular chemistry has proven to be invaluable over time, thanks to the structural versatility, and tailored porosity observed in structures like metal-organic frameworks (MOFs), covalent-organic frameworks (COFs), and metal-organic polyhedra (MOPs). Despite the wide array of ligands and metals available for synthesizing MOFs, they are still somewhat constrained by the reliance on de novo conditions and the focus on generating MOFs with single ligand and metal. To surpass these limitations, researchers have established strategies to generate multivariate (MTV) MOF structures incorporating more than one ligand/metal into the crystal lattice. MTV-MOFs have demonstrated enhanced properties by virtue of the additional functionalities incorporated within their structures. One approach to developing MTV-MOFs is through post-synthetic modification (PSM), where new functionalities are introduced after the initial synthesis, thereby achieving the enhanced properties of MTV-MOFs even in cases where the new functionalities are incompatible with MOF synthesis.

Instantaneous degradation of nerve agent simulants using zirconium-based metal–organic polyhedra

Metal–organic polyhedra (MOPs) are discrete molecules made of metal ions/clusters and organic ligands, and their crystal packing leads to the generation of intrinsic and extrinsic porosity.

Porous supramolecular gels produced by reversible self-gelation of ruthenium-based metal-organic polyhedra.

Supramolecular gels based on metal-organic polyhedra (MOPs) represent a versatile platform to access processable soft materials with controlled porosity. Herein, we report a self-gelation approach that allows the reversible assembly of a novel Ru-based MOP in the form of colloidal gels. The presence of cationic mixed-valence [Ru2(COO)4]+ paddlewheel units allows for modification of the MOP charge via acid/base treatment, and therefore, its solubility. This feature enables control over supramolecular interactions, making it possible to reversibly force MOP aggregation to form nanoparticles, which further assemble to form a colloidal gel network. The gelation process was thoroughly investigated by time-resolved ζ-potential, pH, and dynamic light scattering measurements. This strategy leads to the evolution of hierarchically porous aerogel from individual MOP molecules without using any additional component. Furthermore, we demonstrate that the simplicity of this method can be exploited for the obtention of MOP-based gels through a one-pot synthetic approach starting from MOP precursors.

Transformation of a copper-based metal-organic polyhedron into a mixed linker MOF for CO2 capture.

A new mixed linker metal-organic framework (MOF) has been synthesized from a copper-based metal-organic polyhedron (MOP-1) and 2,2'-bipyridine (2,2'-bipy). The CuMOF-Bipy with a formula of [Cu2(2,2'-bpy)2(m-BDC)2]n is comprised of a binuclear Cu(II) node coordinated to 2,2'-bipy, and isophthalic acid (m-BDC), which bridges to neighboring nodes. The crystal structure of CuMOF-Bipy consists of a stacked two-dimensional framework with the sql topology. CuMOF-Bipy was characterized by single-crystal X-ray diffraction (SC-XRD), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), and CO2 sorption. CuMOF-Bipy was shown to have one-dimensional sinusoidal channels that allow diffusion of CO2 but not N2.

Cathodes Coating Layer with Li-Ion Diffusion Selectivity Employing Interactive Network of Metal-Organic Polyhedras for Li-Ion Batteries.

Surface modification of cathodes using Ni-rich coating layers prevents bulk and surface degradation for the stable operation of Li-ion batteries at high voltages. However, insulating and dense inorganic coating layers often impede charge transfer and ion diffusion kinetics. In this study, the fabrication of dual functional coating materials using metal-organic polyhedra (MOP) with 3D networks within microporous units of Li-ion batteries for surface stabilization and facile ion diffusion is proposed. Zr-based MOP is modified by introducing acyl groups as a chemical linkage (MOPAC), and MOPAC layers are homogenously coated by simple spray coating on the cathode. The coating allow the smooth transport of electrons and ions. MOPAC effectively suppress side reactions between the cathode and electrolyte and protect active materials against aggressive fluoride ions by forming a Li-ion selective passivation film. The MOPAC-coated Ni-rich layered cathode exhibited better cycle retention and enhanced kinetic properties than pristine and MOP-coated cathodes. Reduction of undesirable gas evolution on the cathode by MOPAC is also verified. Microporous MOPAC coating can simultaneously stabilize both the bulk and surface of the Ni-rich layered cathode and maintain good electrochemical reaction kinetics for high-performance Li-ion batteries.

Porous Liquids Responsive to Light.

A porous liquid is a unique liquid medium that combines the cavity of porous solids with the fluidity of liquids. This special characteristic offers potential in various applications. Here we report a type II photoresponsive porous ionic liquid (PPIL) from dissolving a photoresponsive metal-organic polyhedron (PMOP, constructed from dicopper and azobenzene-containing carboxylate) in a polyethylene-glycol-functionalized bulky ionic liquid (IL). Owing to favorable ion interactions, bulky IL molecules encircle outside PMOP, and the inter cavities are maintained. The azobenzene moieties can be isomerized freely in the PPILs to expose and shelter active sites upon visible and UV light irradiation. Hence, the adsorption capacity of PPILs is controllable by light irradiation, and the change in CO2 uptake is up to 30 % compared to neat IL. This study may inspire the development of new adsorption process regulated by light instead of pressure and temperature swing adsorption.

Reversible Discrete-to-Extended Metal-Organic Polyhedra Transformation by Sulfonic Acid Surface Functionalization.

Metal-organic polyhedra (MOPs) are molecular porous units in which desired functionalities can be installed with precise geometrical and compositional control. By combing two complementary chemical moieties, such as sulfonic acid groups and Rh(II)-carboxylate paddlewheel, we synthesized a robust water-soluble cuboctahedral MOP with excellent features in both solution and solid states. Herein, we demonstrate that the superior chemical stability of the Rh2 unit and the elevated number of functional groups on the surface (24 per cage) result in a porous cage with high solubility and stability in water, including acidic, neutral, and basic pH conditions. We also prove that the sulfonic acid-rich form of the cage can be isolated through postsynthetic acid treatment. This transformation involves an improved gas uptake capacity and the capability to reversibly assemble the cages into a three-dimensional (3D) metal-organic framework (MOF) structure. Likewise, this sulfonic acid functionalization provides both MOP and MOF solids with high proton conductivities (>10-3 S cm-1), comparable to previously reported high conducting metal-organic materials. The influence of the MOP-to-MOF processing in the gas adsorption capacity indicates that this structural transformation can provide materials with higher and more controllable porous properties. These results illustrate the high potential of acidic MOPs as more flexible porous building units in terms of processability, structural complexity, and tunability of the properties.

Self‐Healing and Shape Memory Hypercrosslinked Metal‐Organic Polyhedra Polymers via Coordination Post‐Assembly

AbstractCoordination‐driven crosslinking networks with reversible and dynamic characteristics are gaining increasing interest in diverse application fields. Herein, we use a coordination crosslinking approach using metal‐organic polyhedra (MOPs) as high‐connectivity building blocks to post‐assemble a class of coordination hypercrosslinked MOP (CHMOP) polymers. The introduction of 12‐connected MOP nodes to the polymeric networks is critical to producing membranes that overcome the trade‐off between mechanical properties and dynamic healing, and meanwhile possess multifunctionalities including shape memory, solution processability, and 3D printing. The CHMOPs can also be used for anticorrosion coating and achieve function couplings, e.g., shape memory‐assisted self‐healing (SMASH), which have not been achieved in the MOP‐based hybrid materials yet. This work not only offers a feasible strategy to construct new multifunctional materials but also greatly expands the application scopes of MOPs.

Self-Healing and Shape Memory Hypercrosslinked Metal-Organic Polyhedra Polymers via Coordination Post-Assembly.

Coordination-driven crosslinking networks with reversible and dynamic characteristics are gaining increasing interest in diverse application fields. Herein, we use a coordination crosslinking approach using metal-organic polyhedra (MOPs) as high-connectivity building blocks to post-assemble a class of coordination hypercrosslinked MOP (CHMOP) polymers. The introduction of 12-connected MOP nodes to the polymeric networks is critical to producing membranes that overcome the trade-off between mechanical properties and dynamic healing, and meanwhile possess multifunctionalities including shape memory, solution processability, and 3D printing. The CHMOPs can also be used for anticorrosion coating and achieve function couplings, e.g., shape memory-assisted self-healing (SMASH), which have not been achieved in the MOP-based hybrid materials yet. This work not only offers a feasible strategy to construct new multifunctional materials but also greatly expands the application scopes of MOPs.

Microwave-assisted synthesis of Zr-based metal-organic polyhedron: Serving as efficient visible-light photocatalyst for Cr(VI) reduction

For the first time, a microwave-assisted synthesis approach was used to prepare an amino-functionalized Zr-based metal–organic polyhedron (denoted as MW-ZrT-1-NH2). The reaction time was shortened from 12 h to 2 min when compared to the traditional solvothermal method, resulting in crystalline products with good yield and purity. Herein, MW-ZrT-1-NH2 was utilized as a photocatalyst for the catalytic reduction of Cr(VI) under visible-light irradiation. The results revealed that MW-ZrT-1-NH2 exhibits better photocatalytic performance for Cr(VI) reduction. Furthermore, a plausible photocatalytic mechanism was proposed via electron spin resonance (ESR) measurements and radical trapping tests.

Multicomponent, Functionalized HKUST-1 Analogues Assembled via Reticulation of Prefabricated Metal-Organic Polyhedral Cavities.

Metal–organic frameworks (MOFs) assembled from multiple building blocks exhibit greater chemical complexity and superior functionality in practical applications. Herein, we report a new approach based on using prefabricated cavities to design isoreticular multicomponent MOFs from a known parent MOF. We demonstrate this concept with the formation of multicomponent HKUST-1 analogues, using a prefabricated cavity that comprises a cuboctahedral Rh(II) metal–organic polyhedron functionalized with 24 carboxylic acid groups. The cavities are reticulated in three dimensions via Cu(II)-paddlewheel clusters and (functionalized) 1,3,5-benzenetricarboxylate linkers to form three- and four-component HKUST-1 analogues.